| // SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) | |
| // Copyright(c) 2015-17 Intel Corporation. | |
| /* | |
| * SDW Intel Init Routines | |
| * | |
| * Initializes and creates SDW devices based on ACPI and Hardware values | |
| */ | |
| #include <linux/acpi.h> | |
| #include <linux/export.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/io.h> | |
| #include <linux/module.h> | |
| #include <linux/auxiliary_bus.h> | |
| #include <linux/pm_runtime.h> | |
| #include <linux/soundwire/sdw_intel.h> | |
| #include "cadence_master.h" | |
| #include "bus.h" | |
| #include "intel.h" | |
| #include "intel_auxdevice.h" | |
| static void intel_link_dev_release(struct device *dev) | |
| { | |
| struct auxiliary_device *auxdev = to_auxiliary_dev(dev); | |
| struct sdw_intel_link_dev *ldev = auxiliary_dev_to_sdw_intel_link_dev(auxdev); | |
| kfree(ldev); | |
| } | |
| /* alloc, init and add link devices */ | |
| static struct sdw_intel_link_dev *intel_link_dev_register(struct sdw_intel_res *res, | |
| struct sdw_intel_ctx *ctx, | |
| struct fwnode_handle *fwnode, | |
| const char *name, | |
| int link_id) | |
| { | |
| struct sdw_intel_link_dev *ldev; | |
| struct sdw_intel_link_res *link; | |
| struct auxiliary_device *auxdev; | |
| int ret; | |
| ldev = kzalloc_obj(*ldev); | |
| if (!ldev) | |
| return ERR_PTR(-ENOMEM); | |
| auxdev = &ldev->auxdev; | |
| auxdev->name = name; | |
| auxdev->dev.parent = res->parent; | |
| auxdev->dev.fwnode = fwnode; | |
| auxdev->dev.release = intel_link_dev_release; | |
| /* we don't use an IDA since we already have a link ID */ | |
| auxdev->id = link_id; | |
| /* | |
| * keep a handle on the allocated memory, to be used in all other functions. | |
| * Since the same pattern is used to skip links that are not enabled, there is | |
| * no need to check if ctx->ldev[i] is NULL later on. | |
| */ | |
| ctx->ldev[link_id] = ldev; | |
| /* Add link information used in the driver probe */ | |
| link = &ldev->link_res; | |
| link->hw_ops = res->hw_ops; | |
| link->mmio_base = res->mmio_base; | |
| if (!res->ext) { | |
| link->registers = res->mmio_base + SDW_LINK_BASE | |
| + (SDW_LINK_SIZE * link_id); | |
| link->ip_offset = 0; | |
| link->shim = res->mmio_base + res->shim_base; | |
| link->alh = res->mmio_base + res->alh_base; | |
| link->shim_lock = &ctx->shim_lock; | |
| } else { | |
| link->registers = res->mmio_base + SDW_IP_BASE(link_id); | |
| link->ip_offset = SDW_CADENCE_MCP_IP_OFFSET; | |
| link->shim = res->mmio_base + SDW_SHIM2_GENERIC_BASE(link_id); | |
| link->shim_vs = res->mmio_base + SDW_SHIM2_VS_BASE(link_id); | |
| link->shim_lock = res->eml_lock; | |
| link->mic_privacy = res->mic_privacy; | |
| } | |
| link->ops = res->ops; | |
| link->dev = res->dev; | |
| link->clock_stop_quirks = res->clock_stop_quirks; | |
| link->shim_mask = &ctx->shim_mask; | |
| link->link_mask = ctx->link_mask; | |
| link->hbus = res->hbus; | |
| /* now follow the two-step init/add sequence */ | |
| ret = auxiliary_device_init(auxdev); | |
| if (ret < 0) { | |
| dev_err(res->parent, "failed to initialize link dev %s link_id %d\n", | |
| name, link_id); | |
| kfree(ldev); | |
| return ERR_PTR(ret); | |
| } | |
| ret = auxiliary_device_add(&ldev->auxdev); | |
| if (ret < 0) { | |
| dev_err(res->parent, "failed to add link dev %s link_id %d\n", | |
| ldev->auxdev.name, link_id); | |
| /* ldev will be freed with the put_device() and .release sequence */ | |
| auxiliary_device_uninit(&ldev->auxdev); | |
| return ERR_PTR(ret); | |
| } | |
| return ldev; | |
| } | |
| static void intel_link_dev_unregister(struct sdw_intel_link_dev *ldev) | |
| { | |
| auxiliary_device_delete(&ldev->auxdev); | |
| auxiliary_device_uninit(&ldev->auxdev); | |
| } | |
| static int sdw_intel_cleanup(struct sdw_intel_ctx *ctx) | |
| { | |
| struct sdw_intel_link_dev *ldev; | |
| u32 link_mask; | |
| int i; | |
| link_mask = ctx->link_mask; | |
| for (i = 0; i < ctx->count; i++) { | |
| if (!(link_mask & BIT(i))) | |
| continue; | |
| ldev = ctx->ldev[i]; | |
| pm_runtime_disable(&ldev->auxdev.dev); | |
| if (!ldev->link_res.clock_stop_quirks) | |
| pm_runtime_put_noidle(ldev->link_res.dev); | |
| intel_link_dev_unregister(ldev); | |
| } | |
| return 0; | |
| } | |
| irqreturn_t sdw_intel_thread(int irq, void *dev_id) | |
| { | |
| struct sdw_intel_ctx *ctx = dev_id; | |
| struct sdw_intel_link_res *link; | |
| list_for_each_entry(link, &ctx->link_list, list) | |
| sdw_cdns_irq(irq, link->cdns); | |
| return IRQ_HANDLED; | |
| } | |
| EXPORT_SYMBOL_NS(sdw_intel_thread, "SOUNDWIRE_INTEL_INIT"); | |
| static struct sdw_intel_ctx | |
| *sdw_intel_probe_controller(struct sdw_intel_res *res) | |
| { | |
| struct sdw_intel_link_res *link; | |
| struct sdw_intel_link_dev *ldev; | |
| struct sdw_intel_ctx *ctx; | |
| struct acpi_device *adev; | |
| struct sdw_slave *slave; | |
| struct list_head *node; | |
| struct sdw_bus *bus; | |
| u32 link_mask; | |
| int num_slaves = 0; | |
| int count; | |
| int i; | |
| if (!res) | |
| return NULL; | |
| adev = acpi_fetch_acpi_dev(res->handle); | |
| if (!adev) | |
| return NULL; | |
| if (!res->count) | |
| return NULL; | |
| count = res->count; | |
| dev_dbg(&adev->dev, "Creating %d SDW Link devices\n", count); | |
| /* | |
| * we need to alloc/free memory manually and can't use devm: | |
| * this routine may be called from a workqueue, and not from | |
| * the parent .probe. | |
| * If devm_ was used, the memory might never be freed on errors. | |
| */ | |
| ctx = kzalloc_obj(*ctx); | |
| if (!ctx) | |
| return NULL; | |
| ctx->count = count; | |
| /* | |
| * allocate the array of pointers. The link-specific data is allocated | |
| * as part of the first loop below and released with the auxiliary_device_uninit(). | |
| * If some links are disabled, the link pointer will remain NULL. Given that the | |
| * number of links is small, this is simpler than using a list to keep track of links. | |
| */ | |
| ctx->ldev = kzalloc_objs(*ctx->ldev, ctx->count); | |
| if (!ctx->ldev) { | |
| kfree(ctx); | |
| return NULL; | |
| } | |
| ctx->mmio_base = res->mmio_base; | |
| ctx->shim_base = res->shim_base; | |
| ctx->alh_base = res->alh_base; | |
| ctx->link_mask = res->link_mask; | |
| ctx->handle = res->handle; | |
| mutex_init(&ctx->shim_lock); | |
| link_mask = ctx->link_mask; | |
| INIT_LIST_HEAD(&ctx->link_list); | |
| for (i = 0; i < count; i++) { | |
| if (!(link_mask & BIT(i))) | |
| continue; | |
| /* | |
| * init and add a device for each link | |
| * | |
| * The name of the device will be soundwire_intel.link.[i], | |
| * with the "soundwire_intel" module prefix automatically added | |
| * by the auxiliary bus core. | |
| */ | |
| ldev = intel_link_dev_register(res, | |
| ctx, | |
| acpi_fwnode_handle(adev), | |
| "link", | |
| i); | |
| if (IS_ERR(ldev)) | |
| goto err; | |
| link = &ldev->link_res; | |
| link->cdns = auxiliary_get_drvdata(&ldev->auxdev); | |
| if (!link->cdns) { | |
| dev_err(&adev->dev, "failed to get link->cdns\n"); | |
| /* | |
| * 1 will be subtracted from i in the err label, but we need to call | |
| * intel_link_dev_unregister for this ldev, so plus 1 now | |
| */ | |
| i++; | |
| goto err; | |
| } | |
| list_add_tail(&link->list, &ctx->link_list); | |
| bus = &link->cdns->bus; | |
| /* Calculate number of slaves */ | |
| list_for_each(node, &bus->slaves) | |
| num_slaves++; | |
| } | |
| ctx->peripherals = kmalloc_flex(*ctx->peripherals, array, num_slaves); | |
| if (!ctx->peripherals) | |
| goto err; | |
| ctx->peripherals->num_peripherals = num_slaves; | |
| i = 0; | |
| list_for_each_entry(link, &ctx->link_list, list) { | |
| bus = &link->cdns->bus; | |
| list_for_each_entry(slave, &bus->slaves, node) { | |
| ctx->peripherals->array[i] = slave; | |
| i++; | |
| } | |
| } | |
| return ctx; | |
| err: | |
| while (i--) { | |
| if (!(link_mask & BIT(i))) | |
| continue; | |
| ldev = ctx->ldev[i]; | |
| intel_link_dev_unregister(ldev); | |
| } | |
| kfree(ctx->ldev); | |
| kfree(ctx); | |
| return NULL; | |
| } | |
| static int | |
| sdw_intel_startup_controller(struct sdw_intel_ctx *ctx) | |
| { | |
| struct acpi_device *adev = acpi_fetch_acpi_dev(ctx->handle); | |
| struct sdw_intel_link_dev *ldev; | |
| u32 link_mask; | |
| int i; | |
| if (!adev) | |
| return -EINVAL; | |
| if (!ctx->ldev) | |
| return -EINVAL; | |
| link_mask = ctx->link_mask; | |
| /* Startup SDW Master devices */ | |
| for (i = 0; i < ctx->count; i++) { | |
| if (!(link_mask & BIT(i))) | |
| continue; | |
| ldev = ctx->ldev[i]; | |
| intel_link_startup(&ldev->auxdev); | |
| if (!ldev->link_res.clock_stop_quirks) { | |
| /* | |
| * we need to prevent the parent PCI device | |
| * from entering pm_runtime suspend, so that | |
| * power rails to the SoundWire IP are not | |
| * turned off. | |
| */ | |
| pm_runtime_get_noresume(ldev->link_res.dev); | |
| } | |
| } | |
| return 0; | |
| } | |
| /** | |
| * sdw_intel_probe() - SoundWire Intel probe routine | |
| * @res: resource data | |
| * | |
| * This registers an auxiliary device for each Master handled by the controller, | |
| * and SoundWire Master and Slave devices will be created by the auxiliary | |
| * device probe. All the information necessary is stored in the context, and | |
| * the res argument pointer can be freed after this step. | |
| * This function will be called after sdw_intel_acpi_scan() by SOF probe. | |
| */ | |
| struct sdw_intel_ctx | |
| *sdw_intel_probe(struct sdw_intel_res *res) | |
| { | |
| return sdw_intel_probe_controller(res); | |
| } | |
| EXPORT_SYMBOL_NS(sdw_intel_probe, "SOUNDWIRE_INTEL_INIT"); | |
| /** | |
| * sdw_intel_startup() - SoundWire Intel startup | |
| * @ctx: SoundWire context allocated in the probe | |
| * | |
| * Startup Intel SoundWire controller. This function will be called after | |
| * Intel Audio DSP is powered up. | |
| */ | |
| int sdw_intel_startup(struct sdw_intel_ctx *ctx) | |
| { | |
| return sdw_intel_startup_controller(ctx); | |
| } | |
| EXPORT_SYMBOL_NS(sdw_intel_startup, "SOUNDWIRE_INTEL_INIT"); | |
| /** | |
| * sdw_intel_exit() - SoundWire Intel exit | |
| * @ctx: SoundWire context allocated in the probe | |
| * | |
| * Delete the controller instances created and cleanup | |
| */ | |
| void sdw_intel_exit(struct sdw_intel_ctx *ctx) | |
| { | |
| struct sdw_intel_link_res *link; | |
| /* we first resume links and devices and wait synchronously before the cleanup */ | |
| list_for_each_entry(link, &ctx->link_list, list) { | |
| struct sdw_bus *bus = &link->cdns->bus; | |
| int ret; | |
| ret = device_for_each_child(bus->dev, NULL, intel_resume_child_device); | |
| if (ret < 0) | |
| dev_err(bus->dev, "%s: intel_resume_child_device failed: %d\n", | |
| __func__, ret); | |
| } | |
| sdw_intel_cleanup(ctx); | |
| kfree(ctx->peripherals); | |
| kfree(ctx->ldev); | |
| kfree(ctx); | |
| } | |
| EXPORT_SYMBOL_NS(sdw_intel_exit, "SOUNDWIRE_INTEL_INIT"); | |
| void sdw_intel_process_wakeen_event(struct sdw_intel_ctx *ctx) | |
| { | |
| struct sdw_intel_link_dev *ldev; | |
| u32 link_mask; | |
| int i; | |
| if (!ctx->ldev) | |
| return; | |
| link_mask = ctx->link_mask; | |
| /* Startup SDW Master devices */ | |
| for (i = 0; i < ctx->count; i++) { | |
| if (!(link_mask & BIT(i))) | |
| continue; | |
| ldev = ctx->ldev[i]; | |
| intel_link_process_wakeen_event(&ldev->auxdev); | |
| } | |
| } | |
| EXPORT_SYMBOL_NS(sdw_intel_process_wakeen_event, "SOUNDWIRE_INTEL_INIT"); | |
| MODULE_LICENSE("Dual BSD/GPL"); | |
| MODULE_DESCRIPTION("Intel Soundwire Init Library"); |