| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * f_subset.c -- "CDC Subset" Ethernet link function driver | |
| * | |
| * Copyright (C) 2003-2005,2008 David Brownell | |
| * Copyright (C) 2008 Nokia Corporation | |
| */ | |
| #include <linux/cleanup.h> | |
| #include <linux/slab.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/device.h> | |
| #include <linux/etherdevice.h> | |
| #include "u_ether.h" | |
| #include "u_ether_configfs.h" | |
| #include "u_gether.h" | |
| /* | |
| * This function packages a simple "CDC Subset" Ethernet port with no real | |
| * control mechanisms; just raw data transfer over two bulk endpoints. | |
| * The data transfer model is exactly that of CDC Ethernet, which is | |
| * why we call it the "CDC Subset". | |
| * | |
| * Because it's not standardized, this has some interoperability issues. | |
| * They mostly relate to driver binding, since the data transfer model is | |
| * so simple (CDC Ethernet). The original versions of this protocol used | |
| * specific product/vendor IDs: byteswapped IDs for Digital Equipment's | |
| * SA-1100 "Itsy" board, which could run Linux 2.4 kernels and supported | |
| * daughtercards with USB peripheral connectors. (It was used more often | |
| * with other boards, using the Itsy identifiers.) Linux hosts recognized | |
| * this with CONFIG_USB_ARMLINUX; these devices have only one configuration | |
| * and one interface. | |
| * | |
| * At some point, MCCI defined a (nonconformant) CDC MDLM variant called | |
| * "SAFE", which happens to have a mode which is identical to the "CDC | |
| * Subset" in terms of data transfer and lack of control model. This was | |
| * adopted by later Sharp Zaurus models, and by some other software which | |
| * Linux hosts recognize with CONFIG_USB_NET_ZAURUS. | |
| * | |
| * Because Microsoft's RNDIS drivers are far from robust, we added a few | |
| * descriptors to the CDC Subset code, making this code look like a SAFE | |
| * implementation. This lets you use MCCI's host side MS-Windows drivers | |
| * if you get fed up with RNDIS. It also makes it easier for composite | |
| * drivers to work, since they can use class based binding instead of | |
| * caring about specific product and vendor IDs. | |
| */ | |
| struct f_gether { | |
| struct gether port; | |
| char ethaddr[14]; | |
| }; | |
| static inline struct f_gether *func_to_geth(struct usb_function *f) | |
| { | |
| return container_of(f, struct f_gether, port.func); | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| /* | |
| * "Simple" CDC-subset option is a simple vendor-neutral model that most | |
| * full speed controllers can handle: one interface, two bulk endpoints. | |
| * To assist host side drivers, we fancy it up a bit, and add descriptors so | |
| * some host side drivers will understand it as a "SAFE" variant. | |
| * | |
| * "SAFE" loosely follows CDC WMC MDLM, violating the spec in various ways. | |
| * Data endpoints live in the control interface, there's no data interface. | |
| * And it's not used to talk to a cell phone radio. | |
| */ | |
| /* interface descriptor: */ | |
| static struct usb_interface_descriptor subset_data_intf = { | |
| .bLength = sizeof subset_data_intf, | |
| .bDescriptorType = USB_DT_INTERFACE, | |
| /* .bInterfaceNumber = DYNAMIC */ | |
| .bAlternateSetting = 0, | |
| .bNumEndpoints = 2, | |
| .bInterfaceClass = USB_CLASS_COMM, | |
| .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM, | |
| .bInterfaceProtocol = 0, | |
| /* .iInterface = DYNAMIC */ | |
| }; | |
| static struct usb_cdc_header_desc mdlm_header_desc = { | |
| .bLength = sizeof mdlm_header_desc, | |
| .bDescriptorType = USB_DT_CS_INTERFACE, | |
| .bDescriptorSubType = USB_CDC_HEADER_TYPE, | |
| .bcdCDC = cpu_to_le16(0x0110), | |
| }; | |
| static struct usb_cdc_mdlm_desc mdlm_desc = { | |
| .bLength = sizeof mdlm_desc, | |
| .bDescriptorType = USB_DT_CS_INTERFACE, | |
| .bDescriptorSubType = USB_CDC_MDLM_TYPE, | |
| .bcdVersion = cpu_to_le16(0x0100), | |
| .bGUID = { | |
| 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6, | |
| 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f, | |
| }, | |
| }; | |
| /* since "usb_cdc_mdlm_detail_desc" is a variable length structure, we | |
| * can't really use its struct. All we do here is say that we're using | |
| * the submode of "SAFE" which directly matches the CDC Subset. | |
| */ | |
| static u8 mdlm_detail_desc[] = { | |
| 6, | |
| USB_DT_CS_INTERFACE, | |
| USB_CDC_MDLM_DETAIL_TYPE, | |
| 0, /* "SAFE" */ | |
| 0, /* network control capabilities (none) */ | |
| 0, /* network data capabilities ("raw" encapsulation) */ | |
| }; | |
| static struct usb_cdc_ether_desc ether_desc = { | |
| .bLength = sizeof ether_desc, | |
| .bDescriptorType = USB_DT_CS_INTERFACE, | |
| .bDescriptorSubType = USB_CDC_ETHERNET_TYPE, | |
| /* this descriptor actually adds value, surprise! */ | |
| /* .iMACAddress = DYNAMIC */ | |
| .bmEthernetStatistics = cpu_to_le32(0), /* no statistics */ | |
| .wMaxSegmentSize = cpu_to_le16(ETH_FRAME_LEN), | |
| .wNumberMCFilters = cpu_to_le16(0), | |
| .bNumberPowerFilters = 0, | |
| }; | |
| /* full speed support: */ | |
| static struct usb_endpoint_descriptor fs_subset_in_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = USB_DIR_IN, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| }; | |
| static struct usb_endpoint_descriptor fs_subset_out_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bEndpointAddress = USB_DIR_OUT, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| }; | |
| static struct usb_descriptor_header *fs_eth_function[] = { | |
| (struct usb_descriptor_header *) &subset_data_intf, | |
| (struct usb_descriptor_header *) &mdlm_header_desc, | |
| (struct usb_descriptor_header *) &mdlm_desc, | |
| (struct usb_descriptor_header *) &mdlm_detail_desc, | |
| (struct usb_descriptor_header *) ðer_desc, | |
| (struct usb_descriptor_header *) &fs_subset_in_desc, | |
| (struct usb_descriptor_header *) &fs_subset_out_desc, | |
| NULL, | |
| }; | |
| /* high speed support: */ | |
| static struct usb_endpoint_descriptor hs_subset_in_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = cpu_to_le16(512), | |
| }; | |
| static struct usb_endpoint_descriptor hs_subset_out_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = cpu_to_le16(512), | |
| }; | |
| static struct usb_descriptor_header *hs_eth_function[] = { | |
| (struct usb_descriptor_header *) &subset_data_intf, | |
| (struct usb_descriptor_header *) &mdlm_header_desc, | |
| (struct usb_descriptor_header *) &mdlm_desc, | |
| (struct usb_descriptor_header *) &mdlm_detail_desc, | |
| (struct usb_descriptor_header *) ðer_desc, | |
| (struct usb_descriptor_header *) &hs_subset_in_desc, | |
| (struct usb_descriptor_header *) &hs_subset_out_desc, | |
| NULL, | |
| }; | |
| /* super speed support: */ | |
| static struct usb_endpoint_descriptor ss_subset_in_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = cpu_to_le16(1024), | |
| }; | |
| static struct usb_endpoint_descriptor ss_subset_out_desc = { | |
| .bLength = USB_DT_ENDPOINT_SIZE, | |
| .bDescriptorType = USB_DT_ENDPOINT, | |
| .bmAttributes = USB_ENDPOINT_XFER_BULK, | |
| .wMaxPacketSize = cpu_to_le16(1024), | |
| }; | |
| static struct usb_ss_ep_comp_descriptor ss_subset_bulk_comp_desc = { | |
| .bLength = sizeof ss_subset_bulk_comp_desc, | |
| .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, | |
| /* the following 2 values can be tweaked if necessary */ | |
| /* .bMaxBurst = 0, */ | |
| /* .bmAttributes = 0, */ | |
| }; | |
| static struct usb_descriptor_header *ss_eth_function[] = { | |
| (struct usb_descriptor_header *) &subset_data_intf, | |
| (struct usb_descriptor_header *) &mdlm_header_desc, | |
| (struct usb_descriptor_header *) &mdlm_desc, | |
| (struct usb_descriptor_header *) &mdlm_detail_desc, | |
| (struct usb_descriptor_header *) ðer_desc, | |
| (struct usb_descriptor_header *) &ss_subset_in_desc, | |
| (struct usb_descriptor_header *) &ss_subset_bulk_comp_desc, | |
| (struct usb_descriptor_header *) &ss_subset_out_desc, | |
| (struct usb_descriptor_header *) &ss_subset_bulk_comp_desc, | |
| NULL, | |
| }; | |
| /* string descriptors: */ | |
| static struct usb_string geth_string_defs[] = { | |
| [0].s = "CDC Ethernet Subset/SAFE", | |
| [1].s = "", | |
| { } /* end of list */ | |
| }; | |
| static struct usb_gadget_strings geth_string_table = { | |
| .language = 0x0409, /* en-us */ | |
| .strings = geth_string_defs, | |
| }; | |
| static struct usb_gadget_strings *geth_strings[] = { | |
| &geth_string_table, | |
| NULL, | |
| }; | |
| /*-------------------------------------------------------------------------*/ | |
| static int geth_set_alt(struct usb_function *f, unsigned intf, unsigned alt) | |
| { | |
| struct f_gether *geth = func_to_geth(f); | |
| struct usb_composite_dev *cdev = f->config->cdev; | |
| struct net_device *net; | |
| /* we know alt == 0, so this is an activation or a reset */ | |
| if (geth->port.in_ep->enabled) { | |
| DBG(cdev, "reset cdc subset\n"); | |
| gether_disconnect(&geth->port); | |
| } | |
| DBG(cdev, "init + activate cdc subset\n"); | |
| if (config_ep_by_speed(cdev->gadget, f, geth->port.in_ep) || | |
| config_ep_by_speed(cdev->gadget, f, geth->port.out_ep)) { | |
| geth->port.in_ep->desc = NULL; | |
| geth->port.out_ep->desc = NULL; | |
| return -EINVAL; | |
| } | |
| net = gether_connect(&geth->port); | |
| return PTR_ERR_OR_ZERO(net); | |
| } | |
| static void geth_disable(struct usb_function *f) | |
| { | |
| struct f_gether *geth = func_to_geth(f); | |
| struct usb_composite_dev *cdev = f->config->cdev; | |
| DBG(cdev, "net deactivated\n"); | |
| gether_disconnect(&geth->port); | |
| } | |
| /*-------------------------------------------------------------------------*/ | |
| /* serial function driver setup/binding */ | |
| static int | |
| geth_bind(struct usb_configuration *c, struct usb_function *f) | |
| { | |
| struct usb_composite_dev *cdev = c->cdev; | |
| struct f_gether *geth = func_to_geth(f); | |
| struct usb_string *us; | |
| int status; | |
| struct usb_ep *ep; | |
| struct f_gether_opts *gether_opts; | |
| struct net_device *net __free(detach_gadget) = NULL; | |
| gether_opts = container_of(f->fi, struct f_gether_opts, func_inst); | |
| scoped_guard(mutex, &gether_opts->lock) | |
| if (gether_opts->bind_count == 0 && !gether_opts->bound) { | |
| if (!device_is_registered(&gether_opts->net->dev)) { | |
| gether_set_gadget(gether_opts->net, cdev->gadget); | |
| status = gether_register_netdev(gether_opts->net); | |
| } else | |
| status = gether_attach_gadget(gether_opts->net, cdev->gadget); | |
| if (status) | |
| return status; | |
| net = gether_opts->net; | |
| } | |
| us = usb_gstrings_attach(cdev, geth_strings, | |
| ARRAY_SIZE(geth_string_defs)); | |
| if (IS_ERR(us)) | |
| return PTR_ERR(us); | |
| subset_data_intf.iInterface = us[0].id; | |
| ether_desc.iMACAddress = us[1].id; | |
| /* allocate instance-specific interface IDs */ | |
| status = usb_interface_id(c, f); | |
| if (status < 0) | |
| return status; | |
| subset_data_intf.bInterfaceNumber = status; | |
| /* allocate instance-specific endpoints */ | |
| ep = usb_ep_autoconfig(cdev->gadget, &fs_subset_in_desc); | |
| if (!ep) | |
| return -ENODEV; | |
| geth->port.in_ep = ep; | |
| ep = usb_ep_autoconfig(cdev->gadget, &fs_subset_out_desc); | |
| if (!ep) | |
| return -ENODEV; | |
| geth->port.out_ep = ep; | |
| /* support all relevant hardware speeds... we expect that when | |
| * hardware is dual speed, all bulk-capable endpoints work at | |
| * both speeds | |
| */ | |
| hs_subset_in_desc.bEndpointAddress = fs_subset_in_desc.bEndpointAddress; | |
| hs_subset_out_desc.bEndpointAddress = | |
| fs_subset_out_desc.bEndpointAddress; | |
| ss_subset_in_desc.bEndpointAddress = fs_subset_in_desc.bEndpointAddress; | |
| ss_subset_out_desc.bEndpointAddress = | |
| fs_subset_out_desc.bEndpointAddress; | |
| status = usb_assign_descriptors(f, fs_eth_function, hs_eth_function, | |
| ss_eth_function, ss_eth_function); | |
| if (status) | |
| return status; | |
| /* NOTE: all that is done without knowing or caring about | |
| * the network link ... which is unavailable to this code | |
| * until we're activated via set_alt(). | |
| */ | |
| gether_opts->bind_count++; | |
| retain_and_null_ptr(net); | |
| DBG(cdev, "CDC Subset: IN/%s OUT/%s\n", | |
| geth->port.in_ep->name, geth->port.out_ep->name); | |
| return 0; | |
| } | |
| static inline struct f_gether_opts *to_f_gether_opts(struct config_item *item) | |
| { | |
| return container_of(to_config_group(item), struct f_gether_opts, | |
| func_inst.group); | |
| } | |
| /* f_gether_item_ops */ | |
| USB_ETHERNET_CONFIGFS_ITEM(gether); | |
| /* f_gether_opts_dev_addr */ | |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_DEV_ADDR(gether); | |
| /* f_gether_opts_host_addr */ | |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_HOST_ADDR(gether); | |
| /* f_gether_opts_qmult */ | |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_QMULT(gether); | |
| /* f_gether_opts_ifname */ | |
| USB_ETHERNET_CONFIGFS_ITEM_ATTR_IFNAME(gether); | |
| static struct configfs_attribute *gether_attrs[] = { | |
| &gether_opts_attr_dev_addr, | |
| &gether_opts_attr_host_addr, | |
| &gether_opts_attr_qmult, | |
| &gether_opts_attr_ifname, | |
| NULL, | |
| }; | |
| static const struct config_item_type gether_func_type = { | |
| .ct_item_ops = &gether_item_ops, | |
| .ct_attrs = gether_attrs, | |
| .ct_owner = THIS_MODULE, | |
| }; | |
| static void geth_free_inst(struct usb_function_instance *f) | |
| { | |
| struct f_gether_opts *opts; | |
| opts = container_of(f, struct f_gether_opts, func_inst); | |
| if (device_is_registered(&opts->net->dev)) | |
| gether_cleanup(netdev_priv(opts->net)); | |
| else | |
| free_netdev(opts->net); | |
| kfree(opts); | |
| } | |
| static struct usb_function_instance *geth_alloc_inst(void) | |
| { | |
| struct f_gether_opts *opts; | |
| opts = kzalloc_obj(*opts); | |
| if (!opts) | |
| return ERR_PTR(-ENOMEM); | |
| mutex_init(&opts->lock); | |
| opts->func_inst.free_func_inst = geth_free_inst; | |
| opts->net = gether_setup_default(); | |
| if (IS_ERR(opts->net)) { | |
| struct net_device *net = opts->net; | |
| kfree(opts); | |
| return ERR_CAST(net); | |
| } | |
| config_group_init_type_name(&opts->func_inst.group, "", | |
| &gether_func_type); | |
| return &opts->func_inst; | |
| } | |
| static void geth_free(struct usb_function *f) | |
| { | |
| struct f_gether *eth; | |
| struct f_gether_opts *opts; | |
| opts = container_of(f->fi, struct f_gether_opts, func_inst); | |
| eth = func_to_geth(f); | |
| scoped_guard(mutex, &opts->lock) | |
| opts->refcnt--; | |
| kfree(eth); | |
| } | |
| static void geth_unbind(struct usb_configuration *c, struct usb_function *f) | |
| { | |
| struct f_gether_opts *opts; | |
| opts = container_of(f->fi, struct f_gether_opts, func_inst); | |
| geth_string_defs[0].id = 0; | |
| usb_free_all_descriptors(f); | |
| opts->bind_count--; | |
| if (opts->bind_count == 0 && !opts->bound) | |
| gether_detach_gadget(opts->net); | |
| } | |
| static struct usb_function *geth_alloc(struct usb_function_instance *fi) | |
| { | |
| struct f_gether *geth; | |
| struct f_gether_opts *opts; | |
| int status; | |
| /* allocate and initialize one new instance */ | |
| geth = kzalloc_obj(*geth); | |
| if (!geth) | |
| return ERR_PTR(-ENOMEM); | |
| opts = container_of(fi, struct f_gether_opts, func_inst); | |
| mutex_lock(&opts->lock); | |
| opts->refcnt++; | |
| /* export host's Ethernet address in CDC format */ | |
| status = gether_get_host_addr_cdc(opts->net, geth->ethaddr, | |
| sizeof(geth->ethaddr)); | |
| if (status < 12) { | |
| kfree(geth); | |
| mutex_unlock(&opts->lock); | |
| return ERR_PTR(-EINVAL); | |
| } | |
| geth_string_defs[1].s = geth->ethaddr; | |
| geth->port.ioport = netdev_priv(opts->net); | |
| mutex_unlock(&opts->lock); | |
| geth->port.cdc_filter = DEFAULT_FILTER; | |
| geth->port.func.name = "cdc_subset"; | |
| geth->port.func.bind = geth_bind; | |
| geth->port.func.unbind = geth_unbind; | |
| geth->port.func.set_alt = geth_set_alt; | |
| geth->port.func.disable = geth_disable; | |
| geth->port.func.free_func = geth_free; | |
| return &geth->port.func; | |
| } | |
| DECLARE_USB_FUNCTION_INIT(geth, geth_alloc_inst, geth_alloc); | |
| MODULE_DESCRIPTION("\"CDC Subset\" Ethernet link function driver"); | |
| MODULE_LICENSE("GPL"); | |
| MODULE_AUTHOR("David Brownell"); |