| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * uvc_queue.c -- USB Video Class driver - Buffers management | |
| * | |
| * Copyright (C) 2005-2010 | |
| * Laurent Pinchart (laurent.pinchart@ideasonboard.com) | |
| */ | |
| #include <linux/atomic.h> | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/list.h> | |
| #include <linux/module.h> | |
| #include <linux/usb.h> | |
| #include <linux/videodev2.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/wait.h> | |
| #include <media/v4l2-common.h> | |
| #include <media/videobuf2-dma-sg.h> | |
| #include <media/videobuf2-vmalloc.h> | |
| #include "uvc.h" | |
| #include "uvc_video.h" | |
| /* ------------------------------------------------------------------------ | |
| * Video buffers queue management. | |
| * | |
| * Video queues is initialized by uvcg_queue_init(). The function performs | |
| * basic initialization of the uvc_video_queue struct and never fails. | |
| * | |
| * Video buffers are managed by videobuf2. The driver uses a mutex to protect | |
| * the videobuf2 queue operations by serializing calls to videobuf2 and a | |
| * spinlock to protect the IRQ queue that holds the buffers to be processed by | |
| * the driver. | |
| */ | |
| /* ----------------------------------------------------------------------------- | |
| * videobuf2 queue operations | |
| */ | |
| static int uvc_queue_setup(struct vb2_queue *vq, | |
| unsigned int *nbuffers, unsigned int *nplanes, | |
| unsigned int sizes[], struct device *alloc_devs[]) | |
| { | |
| struct uvc_video_queue *queue = vb2_get_drv_priv(vq); | |
| struct uvc_video *video = container_of(queue, struct uvc_video, queue); | |
| if (*nbuffers > UVC_MAX_VIDEO_BUFFERS) | |
| *nbuffers = UVC_MAX_VIDEO_BUFFERS; | |
| if (*nbuffers < UVCG_STREAMING_MIN_BUFFERS) | |
| *nbuffers = UVCG_STREAMING_MIN_BUFFERS; | |
| *nplanes = 1; | |
| sizes[0] = video->imagesize; | |
| return 0; | |
| } | |
| static int uvc_buffer_prepare(struct vb2_buffer *vb) | |
| { | |
| struct uvc_video_queue *queue = vb2_get_drv_priv(vb->vb2_queue); | |
| struct uvc_video *video = container_of(queue, struct uvc_video, queue); | |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); | |
| struct uvc_buffer *buf = container_of(vbuf, struct uvc_buffer, buf); | |
| if (vb->type == V4L2_BUF_TYPE_VIDEO_OUTPUT && | |
| vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) { | |
| uvc_trace(UVC_TRACE_CAPTURE, "[E] Bytes used out of bounds.\n"); | |
| return -EINVAL; | |
| } | |
| if (unlikely(queue->flags & UVC_QUEUE_DISCONNECTED)) | |
| return -ENODEV; | |
| buf->state = UVC_BUF_STATE_QUEUED; | |
| if (queue->use_sg) { | |
| buf->sgt = vb2_dma_sg_plane_desc(vb, 0); | |
| buf->sg = buf->sgt->sgl; | |
| } else { | |
| buf->mem = vb2_plane_vaddr(vb, 0); | |
| } | |
| buf->length = vb2_plane_size(vb, 0); | |
| if (vb->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) { | |
| buf->bytesused = 0; | |
| } else { | |
| buf->bytesused = vb2_get_plane_payload(vb, 0); | |
| if (video->reqs_per_frame != 0) { | |
| buf->req_payload_size = | |
| DIV_ROUND_UP(buf->bytesused + | |
| (video->reqs_per_frame * UVCG_REQUEST_HEADER_LEN), | |
| video->reqs_per_frame); | |
| if (buf->req_payload_size > video->req_size) | |
| buf->req_payload_size = video->req_size; | |
| } else { | |
| buf->req_payload_size = video->max_req_size; | |
| } | |
| } | |
| return 0; | |
| } | |
| static void uvc_buffer_queue(struct vb2_buffer *vb) | |
| { | |
| struct uvc_video_queue *queue = vb2_get_drv_priv(vb->vb2_queue); | |
| struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); | |
| struct uvc_buffer *buf = container_of(vbuf, struct uvc_buffer, buf); | |
| unsigned long flags; | |
| spin_lock_irqsave(&queue->irqlock, flags); | |
| if (likely(!(queue->flags & UVC_QUEUE_DISCONNECTED))) { | |
| list_add_tail(&buf->queue, &queue->irqqueue); | |
| } else { | |
| /* | |
| * If the device is disconnected return the buffer to userspace | |
| * directly. The next QBUF call will fail with -ENODEV. | |
| */ | |
| buf->state = UVC_BUF_STATE_ERROR; | |
| vb2_buffer_done(vb, VB2_BUF_STATE_ERROR); | |
| } | |
| spin_unlock_irqrestore(&queue->irqlock, flags); | |
| } | |
| static const struct vb2_ops uvc_queue_qops = { | |
| .queue_setup = uvc_queue_setup, | |
| .buf_prepare = uvc_buffer_prepare, | |
| .buf_queue = uvc_buffer_queue, | |
| }; | |
| int uvcg_queue_init(struct uvc_video_queue *queue, struct device *dev, enum v4l2_buf_type type, | |
| struct mutex *lock) | |
| { | |
| struct uvc_video *video = container_of(queue, struct uvc_video, queue); | |
| struct usb_composite_dev *cdev = video->uvc->func.config->cdev; | |
| int ret; | |
| queue->queue.type = type; | |
| queue->queue.io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; | |
| queue->queue.drv_priv = queue; | |
| queue->queue.buf_struct_size = sizeof(struct uvc_buffer); | |
| queue->queue.ops = &uvc_queue_qops; | |
| queue->queue.lock = lock; | |
| if (cdev->gadget->sg_supported) { | |
| queue->queue.mem_ops = &vb2_dma_sg_memops; | |
| queue->use_sg = 1; | |
| } else { | |
| queue->queue.mem_ops = &vb2_vmalloc_memops; | |
| } | |
| queue->queue.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_COPY | |
| | V4L2_BUF_FLAG_TSTAMP_SRC_EOF; | |
| queue->queue.dev = dev; | |
| ret = vb2_queue_init(&queue->queue); | |
| if (ret) | |
| return ret; | |
| spin_lock_init(&queue->irqlock); | |
| INIT_LIST_HEAD(&queue->irqqueue); | |
| queue->flags = 0; | |
| return 0; | |
| } | |
| /* | |
| * Free the video buffers. | |
| */ | |
| void uvcg_free_buffers(struct uvc_video_queue *queue) | |
| { | |
| vb2_queue_release(&queue->queue); | |
| } | |
| /* | |
| * Allocate the video buffers. | |
| */ | |
| int uvcg_alloc_buffers(struct uvc_video_queue *queue, | |
| struct v4l2_requestbuffers *rb) | |
| { | |
| int ret; | |
| retry: | |
| ret = vb2_reqbufs(&queue->queue, rb); | |
| if (ret < 0 && queue->use_sg) { | |
| uvc_trace(UVC_TRACE_IOCTL, | |
| "failed to alloc buffer with sg enabled, try non-sg mode\n"); | |
| queue->use_sg = 0; | |
| queue->queue.mem_ops = &vb2_vmalloc_memops; | |
| goto retry; | |
| } | |
| return ret ? ret : rb->count; | |
| } | |
| int uvcg_query_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf) | |
| { | |
| return vb2_querybuf(&queue->queue, buf); | |
| } | |
| int uvcg_queue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf) | |
| { | |
| return vb2_qbuf(&queue->queue, NULL, buf); | |
| } | |
| /* | |
| * Dequeue a video buffer. If nonblocking is false, block until a buffer is | |
| * available. | |
| */ | |
| int uvcg_dequeue_buffer(struct uvc_video_queue *queue, struct v4l2_buffer *buf, | |
| int nonblocking) | |
| { | |
| return vb2_dqbuf(&queue->queue, buf, nonblocking); | |
| } | |
| /* | |
| * Poll the video queue. | |
| * | |
| * This function implements video queue polling and is intended to be used by | |
| * the device poll handler. | |
| */ | |
| __poll_t uvcg_queue_poll(struct uvc_video_queue *queue, struct file *file, | |
| poll_table *wait) | |
| { | |
| return vb2_poll(&queue->queue, file, wait); | |
| } | |
| int uvcg_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma) | |
| { | |
| return vb2_mmap(&queue->queue, vma); | |
| } | |
| #ifndef CONFIG_MMU | |
| /* | |
| * Get unmapped area. | |
| * | |
| * NO-MMU arch need this function to make mmap() work correctly. | |
| */ | |
| unsigned long uvcg_queue_get_unmapped_area(struct uvc_video_queue *queue, | |
| unsigned long pgoff) | |
| { | |
| return vb2_get_unmapped_area(&queue->queue, 0, 0, pgoff, 0); | |
| } | |
| #endif | |
| /* | |
| * Cancel the video buffers queue. | |
| * | |
| * Cancelling the queue marks all buffers on the irq queue as erroneous, | |
| * wakes them up and removes them from the queue. | |
| * | |
| * If the disconnect parameter is set, further calls to uvc_queue_buffer will | |
| * fail with -ENODEV. | |
| * | |
| * This function acquires the irq spinlock and can be called from interrupt | |
| * context. | |
| */ | |
| void uvcg_queue_cancel(struct uvc_video_queue *queue, int disconnect) | |
| { | |
| struct uvc_buffer *buf; | |
| unsigned long flags; | |
| spin_lock_irqsave(&queue->irqlock, flags); | |
| while (!list_empty(&queue->irqqueue)) { | |
| buf = list_first_entry(&queue->irqqueue, struct uvc_buffer, | |
| queue); | |
| list_del(&buf->queue); | |
| buf->state = UVC_BUF_STATE_ERROR; | |
| vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_ERROR); | |
| } | |
| queue->buf_used = 0; | |
| /* | |
| * This must be protected by the irqlock spinlock to avoid race | |
| * conditions between uvc_queue_buffer and the disconnection event that | |
| * could result in an interruptible wait in uvc_dequeue_buffer. Do not | |
| * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED | |
| * state outside the queue code. | |
| */ | |
| if (disconnect) | |
| queue->flags |= UVC_QUEUE_DISCONNECTED; | |
| spin_unlock_irqrestore(&queue->irqlock, flags); | |
| } | |
| /* | |
| * Enable or disable the video buffers queue. | |
| * | |
| * The queue must be enabled before starting video acquisition and must be | |
| * disabled after stopping it. This ensures that the video buffers queue | |
| * state can be properly initialized before buffers are accessed from the | |
| * interrupt handler. | |
| * | |
| * Enabling the video queue initializes parameters (such as sequence number, | |
| * sync pattern, ...). If the queue is already enabled, return -EBUSY. | |
| * | |
| * Disabling the video queue cancels the queue and removes all buffers from | |
| * the main queue. | |
| * | |
| * This function can't be called from interrupt context. Use | |
| * uvcg_queue_cancel() instead. | |
| */ | |
| int uvcg_queue_enable(struct uvc_video_queue *queue, int enable) | |
| { | |
| unsigned long flags; | |
| int ret = 0; | |
| if (enable) { | |
| ret = vb2_streamon(&queue->queue, queue->queue.type); | |
| if (ret < 0) | |
| return ret; | |
| queue->sequence = 0; | |
| queue->buf_used = 0; | |
| queue->flags &= ~UVC_QUEUE_DROP_INCOMPLETE; | |
| } else { | |
| ret = vb2_streamoff(&queue->queue, queue->queue.type); | |
| if (ret < 0) | |
| return ret; | |
| spin_lock_irqsave(&queue->irqlock, flags); | |
| INIT_LIST_HEAD(&queue->irqqueue); | |
| /* | |
| * FIXME: We need to clear the DISCONNECTED flag to ensure that | |
| * applications will be able to queue buffers for the next | |
| * streaming run. However, clearing it here doesn't guarantee | |
| * that the device will be reconnected in the meantime. | |
| */ | |
| queue->flags &= ~UVC_QUEUE_DISCONNECTED; | |
| spin_unlock_irqrestore(&queue->irqlock, flags); | |
| } | |
| return ret; | |
| } | |
| /* called with &queue_irqlock held.. */ | |
| void uvcg_complete_buffer(struct uvc_video_queue *queue, | |
| struct uvc_buffer *buf) | |
| { | |
| if (queue->flags & UVC_QUEUE_DROP_INCOMPLETE) { | |
| queue->flags &= ~UVC_QUEUE_DROP_INCOMPLETE; | |
| buf->state = UVC_BUF_STATE_ERROR; | |
| vb2_set_plane_payload(&buf->buf.vb2_buf, 0, 0); | |
| vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_ERROR); | |
| return; | |
| } | |
| buf->buf.field = V4L2_FIELD_NONE; | |
| buf->buf.sequence = queue->sequence++; | |
| buf->buf.vb2_buf.timestamp = ktime_get_ns(); | |
| vb2_set_plane_payload(&buf->buf.vb2_buf, 0, buf->bytesused); | |
| vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_DONE); | |
| } | |
| struct uvc_buffer *uvcg_queue_head(struct uvc_video_queue *queue) | |
| { | |
| struct uvc_buffer *buf = NULL; | |
| if (!list_empty(&queue->irqqueue)) | |
| buf = list_first_entry(&queue->irqqueue, struct uvc_buffer, | |
| queue); | |
| return buf; | |
| } | |