| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * linux/fs/ext2/file.c | |
| * | |
| * Copyright (C) 1992, 1993, 1994, 1995 | |
| * Remy Card (card@masi.ibp.fr) | |
| * Laboratoire MASI - Institut Blaise Pascal | |
| * Universite Pierre et Marie Curie (Paris VI) | |
| * | |
| * from | |
| * | |
| * linux/fs/minix/file.c | |
| * | |
| * Copyright (C) 1991, 1992 Linus Torvalds | |
| * | |
| * ext2 fs regular file handling primitives | |
| * | |
| * 64-bit file support on 64-bit platforms by Jakub Jelinek | |
| * (jj@sunsite.ms.mff.cuni.cz) | |
| */ | |
| #include <linux/time.h> | |
| #include <linux/pagemap.h> | |
| #include <linux/filelock.h> | |
| #include <linux/quotaops.h> | |
| #include <linux/iomap.h> | |
| #include <linux/uio.h> | |
| #include <linux/buffer_head.h> | |
| #include "ext2.h" | |
| #include "xattr.h" | |
| #include "acl.h" | |
| #include "trace.h" | |
| /* | |
| * Called when filp is released. This happens when all file descriptors | |
| * for a single struct file are closed. Note that different open() calls | |
| * for the same file yield different struct file structures. | |
| */ | |
| static int ext2_release_file (struct inode * inode, struct file * filp) | |
| { | |
| if (filp->f_mode & FMODE_WRITE) { | |
| mutex_lock(&EXT2_I(inode)->truncate_mutex); | |
| ext2_discard_reservation(inode); | |
| mutex_unlock(&EXT2_I(inode)->truncate_mutex); | |
| } | |
| return 0; | |
| } | |
| int ext2_fsync(struct file *file, loff_t start, loff_t end, int datasync) | |
| { | |
| int ret; | |
| struct inode *inode = file->f_mapping->host; | |
| struct super_block *sb = inode->i_sb; | |
| ret = mmb_fsync(file, &EXT2_I(inode)->i_metadata_bhs, | |
| start, end, datasync); | |
| if (ret == -EIO) | |
| /* We don't really know where the IO error happened... */ | |
| ext2_error(sb, __func__, | |
| "detected IO error when writing metadata buffers"); | |
| return ret; | |
| } | |
| static ssize_t ext2_dio_read_iter(struct kiocb *iocb, struct iov_iter *to) | |
| { | |
| struct file *file = iocb->ki_filp; | |
| struct inode *inode = file->f_mapping->host; | |
| ssize_t ret; | |
| trace_ext2_dio_read_begin(iocb, to, 0); | |
| inode_lock_shared(inode); | |
| ret = iomap_dio_rw(iocb, to, &ext2_iomap_ops, NULL, 0, NULL, 0); | |
| inode_unlock_shared(inode); | |
| trace_ext2_dio_read_end(iocb, to, ret); | |
| return ret; | |
| } | |
| static int ext2_dio_write_end_io(struct kiocb *iocb, ssize_t size, | |
| int error, unsigned int flags) | |
| { | |
| loff_t pos = iocb->ki_pos; | |
| struct inode *inode = file_inode(iocb->ki_filp); | |
| if (error) | |
| goto out; | |
| /* | |
| * If we are extending the file, we have to update i_size here before | |
| * page cache gets invalidated in iomap_dio_rw(). This prevents racing | |
| * buffered reads from zeroing out too much from page cache pages. | |
| * Note that all extending writes always happens synchronously with | |
| * inode lock held by ext2_dio_write_iter(). So it is safe to update | |
| * inode size here for extending file writes. | |
| */ | |
| pos += size; | |
| if (pos > i_size_read(inode)) { | |
| i_size_write(inode, pos); | |
| mark_inode_dirty(inode); | |
| } | |
| out: | |
| trace_ext2_dio_write_endio(iocb, size, error); | |
| return error; | |
| } | |
| static const struct iomap_dio_ops ext2_dio_write_ops = { | |
| .end_io = ext2_dio_write_end_io, | |
| }; | |
| static ssize_t ext2_dio_write_iter(struct kiocb *iocb, struct iov_iter *from) | |
| { | |
| struct file *file = iocb->ki_filp; | |
| struct inode *inode = file->f_mapping->host; | |
| ssize_t ret; | |
| unsigned int flags = 0; | |
| unsigned long blocksize = inode->i_sb->s_blocksize; | |
| loff_t offset = iocb->ki_pos; | |
| loff_t count = iov_iter_count(from); | |
| ssize_t status = 0; | |
| trace_ext2_dio_write_begin(iocb, from, 0); | |
| inode_lock(inode); | |
| ret = generic_write_checks(iocb, from); | |
| if (ret <= 0) | |
| goto out_unlock; | |
| ret = kiocb_modified(iocb); | |
| if (ret) | |
| goto out_unlock; | |
| /* use IOMAP_DIO_FORCE_WAIT for unaligned or extending writes */ | |
| if (iocb->ki_pos + iov_iter_count(from) > i_size_read(inode) || | |
| (!IS_ALIGNED(iocb->ki_pos | iov_iter_alignment(from), blocksize))) | |
| flags |= IOMAP_DIO_FORCE_WAIT; | |
| ret = iomap_dio_rw(iocb, from, &ext2_iomap_ops, &ext2_dio_write_ops, | |
| flags, NULL, 0); | |
| /* ENOTBLK is magic return value for fallback to buffered-io */ | |
| if (ret == -ENOTBLK) | |
| ret = 0; | |
| if (ret < 0 && ret != -EIOCBQUEUED) | |
| ext2_write_failed(inode->i_mapping, offset + count); | |
| /* handle case for partial write and for fallback to buffered write */ | |
| if (ret >= 0 && iov_iter_count(from)) { | |
| loff_t pos, endbyte; | |
| int ret2; | |
| iocb->ki_flags &= ~IOCB_DIRECT; | |
| pos = iocb->ki_pos; | |
| status = generic_perform_write(iocb, from); | |
| if (unlikely(status < 0)) { | |
| ret = status; | |
| goto out_unlock; | |
| } | |
| ret += status; | |
| endbyte = pos + status - 1; | |
| ret2 = filemap_write_and_wait_range(inode->i_mapping, pos, | |
| endbyte); | |
| if (!ret2) { | |
| invalidate_mapping_pages(inode->i_mapping, | |
| pos >> PAGE_SHIFT, | |
| endbyte >> PAGE_SHIFT); | |
| if (ret > 0) | |
| ret = generic_write_sync(iocb, ret); | |
| } else { | |
| ret = ret2; | |
| } | |
| } | |
| out_unlock: | |
| inode_unlock(inode); | |
| if (status) | |
| trace_ext2_dio_write_buff_end(iocb, from, status); | |
| trace_ext2_dio_write_end(iocb, from, ret); | |
| return ret; | |
| } | |
| static ssize_t ext2_file_read_iter(struct kiocb *iocb, struct iov_iter *to) | |
| { | |
| if (iocb->ki_flags & IOCB_DIRECT) | |
| return ext2_dio_read_iter(iocb, to); | |
| return generic_file_read_iter(iocb, to); | |
| } | |
| static ssize_t ext2_file_write_iter(struct kiocb *iocb, struct iov_iter *from) | |
| { | |
| if (iocb->ki_flags & IOCB_DIRECT) | |
| return ext2_dio_write_iter(iocb, from); | |
| return generic_file_write_iter(iocb, from); | |
| } | |
| static int ext2_file_open(struct inode *inode, struct file *filp) | |
| { | |
| filp->f_mode |= FMODE_CAN_ODIRECT; | |
| return dquot_file_open(inode, filp); | |
| } | |
| const struct file_operations ext2_file_operations = { | |
| .llseek = generic_file_llseek, | |
| .read_iter = ext2_file_read_iter, | |
| .write_iter = ext2_file_write_iter, | |
| .unlocked_ioctl = ext2_ioctl, | |
| #ifdef CONFIG_COMPAT | |
| .compat_ioctl = ext2_compat_ioctl, | |
| #endif | |
| .mmap_prepare = generic_file_mmap_prepare, | |
| .open = ext2_file_open, | |
| .release = ext2_release_file, | |
| .fsync = ext2_fsync, | |
| .get_unmapped_area = thp_get_unmapped_area, | |
| .splice_read = filemap_splice_read, | |
| .splice_write = iter_file_splice_write, | |
| .setlease = generic_setlease, | |
| }; | |
| const struct inode_operations ext2_file_inode_operations = { | |
| .listxattr = ext2_listxattr, | |
| .getattr = ext2_getattr, | |
| .setattr = ext2_setattr, | |
| .get_inode_acl = ext2_get_acl, | |
| .set_acl = ext2_set_acl, | |
| .fiemap = ext2_fiemap, | |
| .fileattr_get = ext2_fileattr_get, | |
| .fileattr_set = ext2_fileattr_set, | |
| }; |