| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * Performance events ring-buffer code: | |
| * | |
| * Copyright (C) 2008 Linutronix GmbH, Thomas Gleixner <tglx@kernel.org> | |
| * Copyright (C) 2008-2011 Red Hat, Inc., Ingo Molnar | |
| * Copyright (C) 2008-2011 Red Hat, Inc., Peter Zijlstra | |
| * Copyright © 2009 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com> | |
| */ | |
| #include <linux/perf_event.h> | |
| #include <linux/vmalloc.h> | |
| #include <linux/slab.h> | |
| #include <linux/circ_buf.h> | |
| #include <linux/poll.h> | |
| #include <linux/nospec.h> | |
| #include "internal.h" | |
| static void perf_output_wakeup(struct perf_output_handle *handle) | |
| { | |
| atomic_set(&handle->rb->poll, EPOLLIN | EPOLLRDNORM); | |
| handle->event->pending_wakeup = 1; | |
| if (*perf_event_fasync(handle->event) && !handle->event->pending_kill) | |
| handle->event->pending_kill = POLL_IN; | |
| irq_work_queue(&handle->event->pending_irq); | |
| } | |
| /* | |
| * We need to ensure a later event_id doesn't publish a head when a former | |
| * event isn't done writing. However since we need to deal with NMIs we | |
| * cannot fully serialize things. | |
| * | |
| * We only publish the head (and generate a wakeup) when the outer-most | |
| * event completes. | |
| */ | |
| static void perf_output_get_handle(struct perf_output_handle *handle) | |
| { | |
| struct perf_buffer *rb = handle->rb; | |
| preempt_disable(); | |
| /* | |
| * Avoid an explicit LOAD/STORE such that architectures with memops | |
| * can use them. | |
| */ | |
| (*(volatile unsigned int *)&rb->nest)++; | |
| handle->wakeup = local_read(&rb->wakeup); | |
| } | |
| static void perf_output_put_handle(struct perf_output_handle *handle) | |
| { | |
| struct perf_buffer *rb = handle->rb; | |
| unsigned long head; | |
| unsigned int nest; | |
| /* | |
| * If this isn't the outermost nesting, we don't have to update | |
| * @rb->user_page->data_head. | |
| */ | |
| nest = READ_ONCE(rb->nest); | |
| if (nest > 1) { | |
| WRITE_ONCE(rb->nest, nest - 1); | |
| goto out; | |
| } | |
| again: | |
| /* | |
| * In order to avoid publishing a head value that goes backwards, | |
| * we must ensure the load of @rb->head happens after we've | |
| * incremented @rb->nest. | |
| * | |
| * Otherwise we can observe a @rb->head value before one published | |
| * by an IRQ/NMI happening between the load and the increment. | |
| */ | |
| barrier(); | |
| head = local_read(&rb->head); | |
| /* | |
| * IRQ/NMI can happen here and advance @rb->head, causing our | |
| * load above to be stale. | |
| */ | |
| /* | |
| * Since the mmap() consumer (userspace) can run on a different CPU: | |
| * | |
| * kernel user | |
| * | |
| * if (LOAD ->data_tail) { LOAD ->data_head | |
| * (A) smp_rmb() (C) | |
| * STORE $data LOAD $data | |
| * smp_wmb() (B) smp_mb() (D) | |
| * STORE ->data_head STORE ->data_tail | |
| * } | |
| * | |
| * Where A pairs with D, and B pairs with C. | |
| * | |
| * In our case (A) is a control dependency that separates the load of | |
| * the ->data_tail and the stores of $data. In case ->data_tail | |
| * indicates there is no room in the buffer to store $data we do not. | |
| * | |
| * D needs to be a full barrier since it separates the data READ | |
| * from the tail WRITE. | |
| * | |
| * For B a WMB is sufficient since it separates two WRITEs, and for C | |
| * an RMB is sufficient since it separates two READs. | |
| * | |
| * See perf_output_begin(). | |
| */ | |
| smp_wmb(); /* B, matches C */ | |
| WRITE_ONCE(rb->user_page->data_head, head); | |
| /* | |
| * We must publish the head before decrementing the nest count, | |
| * otherwise an IRQ/NMI can publish a more recent head value and our | |
| * write will (temporarily) publish a stale value. | |
| */ | |
| barrier(); | |
| WRITE_ONCE(rb->nest, 0); | |
| /* | |
| * Ensure we decrement @rb->nest before we validate the @rb->head. | |
| * Otherwise we cannot be sure we caught the 'last' nested update. | |
| */ | |
| barrier(); | |
| if (unlikely(head != local_read(&rb->head))) { | |
| WRITE_ONCE(rb->nest, 1); | |
| goto again; | |
| } | |
| if (handle->wakeup != local_read(&rb->wakeup)) | |
| perf_output_wakeup(handle); | |
| out: | |
| preempt_enable(); | |
| } | |
| static __always_inline bool | |
| ring_buffer_has_space(unsigned long head, unsigned long tail, | |
| unsigned long data_size, unsigned int size, | |
| bool backward) | |
| { | |
| if (!backward) | |
| return CIRC_SPACE(head, tail, data_size) >= size; | |
| else | |
| return CIRC_SPACE(tail, head, data_size) >= size; | |
| } | |
| static __always_inline int | |
| __perf_output_begin(struct perf_output_handle *handle, | |
| struct perf_sample_data *data, | |
| struct perf_event *event, unsigned int size, | |
| bool backward) | |
| { | |
| struct perf_buffer *rb; | |
| unsigned long tail, offset, head; | |
| int have_lost, page_shift; | |
| struct { | |
| struct perf_event_header header; | |
| u64 id; | |
| u64 lost; | |
| } lost_event; | |
| rcu_read_lock(); | |
| /* | |
| * For inherited events we send all the output towards the parent. | |
| */ | |
| if (event->parent) | |
| event = event->parent; | |
| rb = rcu_dereference(event->rb); | |
| if (unlikely(!rb)) | |
| goto out; | |
| if (unlikely(rb->paused)) { | |
| if (rb->nr_pages) { | |
| local_inc(&rb->lost); | |
| atomic64_inc(&event->lost_samples); | |
| } | |
| goto out; | |
| } | |
| handle->rb = rb; | |
| handle->event = event; | |
| handle->flags = 0; | |
| have_lost = local_read(&rb->lost); | |
| if (unlikely(have_lost)) { | |
| size += sizeof(lost_event); | |
| if (event->attr.sample_id_all) | |
| size += event->id_header_size; | |
| } | |
| perf_output_get_handle(handle); | |
| offset = local_read(&rb->head); | |
| do { | |
| head = offset; | |
| tail = READ_ONCE(rb->user_page->data_tail); | |
| if (!rb->overwrite) { | |
| if (unlikely(!ring_buffer_has_space(head, tail, | |
| perf_data_size(rb), | |
| size, backward))) | |
| goto fail; | |
| } | |
| /* | |
| * The above forms a control dependency barrier separating the | |
| * @tail load above from the data stores below. Since the @tail | |
| * load is required to compute the branch to fail below. | |
| * | |
| * A, matches D; the full memory barrier userspace SHOULD issue | |
| * after reading the data and before storing the new tail | |
| * position. | |
| * | |
| * See perf_output_put_handle(). | |
| */ | |
| if (!backward) | |
| head += size; | |
| else | |
| head -= size; | |
| } while (!local_try_cmpxchg(&rb->head, &offset, head)); | |
| if (backward) { | |
| offset = head; | |
| head = (u64)(-head); | |
| } | |
| /* | |
| * We rely on the implied barrier() by local_cmpxchg() to ensure | |
| * none of the data stores below can be lifted up by the compiler. | |
| */ | |
| if (unlikely(head - local_read(&rb->wakeup) > rb->watermark)) | |
| local_add(rb->watermark, &rb->wakeup); | |
| page_shift = PAGE_SHIFT + page_order(rb); | |
| handle->page = (offset >> page_shift) & (rb->nr_pages - 1); | |
| offset &= (1UL << page_shift) - 1; | |
| handle->addr = rb->data_pages[handle->page] + offset; | |
| handle->size = (1UL << page_shift) - offset; | |
| if (unlikely(have_lost)) { | |
| lost_event.header.size = sizeof(lost_event); | |
| lost_event.header.type = PERF_RECORD_LOST; | |
| lost_event.header.misc = 0; | |
| lost_event.id = event->id; | |
| lost_event.lost = local_xchg(&rb->lost, 0); | |
| /* XXX mostly redundant; @data is already fully initializes */ | |
| perf_event_header__init_id(&lost_event.header, data, event); | |
| perf_output_put(handle, lost_event); | |
| perf_event__output_id_sample(event, handle, data); | |
| } | |
| return 0; | |
| fail: | |
| local_inc(&rb->lost); | |
| atomic64_inc(&event->lost_samples); | |
| perf_output_put_handle(handle); | |
| out: | |
| rcu_read_unlock(); | |
| return -ENOSPC; | |
| } | |
| int perf_output_begin_forward(struct perf_output_handle *handle, | |
| struct perf_sample_data *data, | |
| struct perf_event *event, unsigned int size) | |
| { | |
| return __perf_output_begin(handle, data, event, size, false); | |
| } | |
| int perf_output_begin_backward(struct perf_output_handle *handle, | |
| struct perf_sample_data *data, | |
| struct perf_event *event, unsigned int size) | |
| { | |
| return __perf_output_begin(handle, data, event, size, true); | |
| } | |
| int perf_output_begin(struct perf_output_handle *handle, | |
| struct perf_sample_data *data, | |
| struct perf_event *event, unsigned int size) | |
| { | |
| return __perf_output_begin(handle, data, event, size, | |
| unlikely(is_write_backward(event))); | |
| } | |
| unsigned int perf_output_copy(struct perf_output_handle *handle, | |
| const void *buf, unsigned int len) | |
| { | |
| return __output_copy(handle, buf, len); | |
| } | |
| unsigned int perf_output_skip(struct perf_output_handle *handle, | |
| unsigned int len) | |
| { | |
| return __output_skip(handle, NULL, len); | |
| } | |
| void perf_output_end(struct perf_output_handle *handle) | |
| { | |
| perf_output_put_handle(handle); | |
| rcu_read_unlock(); | |
| } | |
| static void | |
| ring_buffer_init(struct perf_buffer *rb, long watermark, int flags) | |
| { | |
| long max_size = perf_data_size(rb); | |
| if (watermark) | |
| rb->watermark = min(max_size, watermark); | |
| if (!rb->watermark) | |
| rb->watermark = max_size / 2; | |
| if (flags & RING_BUFFER_WRITABLE) | |
| rb->overwrite = 0; | |
| else | |
| rb->overwrite = 1; | |
| refcount_set(&rb->refcount, 1); | |
| INIT_LIST_HEAD(&rb->event_list); | |
| spin_lock_init(&rb->event_lock); | |
| /* | |
| * perf_output_begin() only checks rb->paused, therefore | |
| * rb->paused must be true if we have no pages for output. | |
| */ | |
| if (!rb->nr_pages) | |
| rb->paused = 1; | |
| mutex_init(&rb->aux_mutex); | |
| rb->mmap_user = get_current_user(); | |
| refcount_set(&rb->mmap_count, 1); | |
| } | |
| void perf_aux_output_flag(struct perf_output_handle *handle, u64 flags) | |
| { | |
| /* | |
| * OVERWRITE is determined by perf_aux_output_end() and can't | |
| * be passed in directly. | |
| */ | |
| if (WARN_ON_ONCE(flags & PERF_AUX_FLAG_OVERWRITE)) | |
| return; | |
| handle->aux_flags |= flags; | |
| } | |
| EXPORT_SYMBOL_GPL(perf_aux_output_flag); | |
| /* | |
| * This is called before hardware starts writing to the AUX area to | |
| * obtain an output handle and make sure there's room in the buffer. | |
| * When the capture completes, call perf_aux_output_end() to commit | |
| * the recorded data to the buffer. | |
| * | |
| * The ordering is similar to that of perf_output_{begin,end}, with | |
| * the exception of (B), which should be taken care of by the pmu | |
| * driver, since ordering rules will differ depending on hardware. | |
| * | |
| * Call this from pmu::start(); see the comment in perf_aux_output_end() | |
| * about its use in pmu callbacks. Both can also be called from the PMI | |
| * handler if needed. | |
| */ | |
| void *perf_aux_output_begin(struct perf_output_handle *handle, | |
| struct perf_event *event) | |
| { | |
| struct perf_event *output_event = event; | |
| unsigned long aux_head, aux_tail; | |
| struct perf_buffer *rb; | |
| unsigned int nest; | |
| if (output_event->parent) | |
| output_event = output_event->parent; | |
| /* | |
| * Since this will typically be open across pmu::add/pmu::del, we | |
| * grab ring_buffer's refcount instead of holding rcu read lock | |
| * to make sure it doesn't disappear under us. | |
| */ | |
| rb = ring_buffer_get(output_event); | |
| if (!rb) | |
| return NULL; | |
| if (!rb_has_aux(rb)) | |
| goto err; | |
| /* | |
| * If aux_mmap_count is zero, the aux buffer is in perf_mmap_close(), | |
| * about to get freed, so we leave immediately. | |
| * | |
| * Checking rb::aux_mmap_count and rb::refcount has to be done in | |
| * the same order, see perf_mmap_close. Otherwise we end up freeing | |
| * aux pages in this path, which is a bug, because in_atomic(). | |
| */ | |
| if (!refcount_read(&rb->aux_mmap_count)) | |
| goto err; | |
| if (!refcount_inc_not_zero(&rb->aux_refcount)) | |
| goto err; | |
| nest = READ_ONCE(rb->aux_nest); | |
| /* | |
| * Nesting is not supported for AUX area, make sure nested | |
| * writers are caught early | |
| */ | |
| if (WARN_ON_ONCE(nest)) | |
| goto err_put; | |
| WRITE_ONCE(rb->aux_nest, nest + 1); | |
| aux_head = rb->aux_head; | |
| handle->rb = rb; | |
| handle->event = event; | |
| handle->head = aux_head; | |
| handle->size = 0; | |
| handle->aux_flags = 0; | |
| /* | |
| * In overwrite mode, AUX data stores do not depend on aux_tail, | |
| * therefore (A) control dependency barrier does not exist. The | |
| * (B) <-> (C) ordering is still observed by the pmu driver. | |
| */ | |
| if (!rb->aux_overwrite) { | |
| aux_tail = READ_ONCE(rb->user_page->aux_tail); | |
| handle->wakeup = rb->aux_wakeup + rb->aux_watermark; | |
| if (aux_head - aux_tail < perf_aux_size(rb)) | |
| handle->size = CIRC_SPACE(aux_head, aux_tail, perf_aux_size(rb)); | |
| /* | |
| * handle->size computation depends on aux_tail load; this forms a | |
| * control dependency barrier separating aux_tail load from aux data | |
| * store that will be enabled on successful return | |
| */ | |
| if (!handle->size) { /* A, matches D */ | |
| perf_event_disable_inatomic(handle->event); | |
| perf_output_wakeup(handle); | |
| WRITE_ONCE(rb->aux_nest, 0); | |
| goto err_put; | |
| } | |
| } | |
| return handle->rb->aux_priv; | |
| err_put: | |
| /* can't be last */ | |
| rb_free_aux(rb); | |
| err: | |
| ring_buffer_put(rb); | |
| handle->event = NULL; | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(perf_aux_output_begin); | |
| static __always_inline bool rb_need_aux_wakeup(struct perf_buffer *rb) | |
| { | |
| if (rb->aux_overwrite) | |
| return false; | |
| if (rb->aux_head - rb->aux_wakeup >= rb->aux_watermark) { | |
| rb->aux_wakeup = rounddown(rb->aux_head, rb->aux_watermark); | |
| return true; | |
| } | |
| return false; | |
| } | |
| /* | |
| * Commit the data written by hardware into the ring buffer by adjusting | |
| * aux_head and posting a PERF_RECORD_AUX into the perf buffer. It is the | |
| * pmu driver's responsibility to observe ordering rules of the hardware, | |
| * so that all the data is externally visible before this is called. | |
| * | |
| * Note: this has to be called from pmu::stop() callback, as the assumption | |
| * of the AUX buffer management code is that after pmu::stop(), the AUX | |
| * transaction must be stopped and therefore drop the AUX reference count. | |
| */ | |
| void perf_aux_output_end(struct perf_output_handle *handle, unsigned long size) | |
| { | |
| bool wakeup = !!(handle->aux_flags & PERF_AUX_FLAG_TRUNCATED); | |
| struct perf_buffer *rb = handle->rb; | |
| unsigned long aux_head; | |
| /* in overwrite mode, driver provides aux_head via handle */ | |
| if (rb->aux_overwrite) { | |
| handle->aux_flags |= PERF_AUX_FLAG_OVERWRITE; | |
| aux_head = handle->head; | |
| rb->aux_head = aux_head; | |
| } else { | |
| handle->aux_flags &= ~PERF_AUX_FLAG_OVERWRITE; | |
| aux_head = rb->aux_head; | |
| rb->aux_head += size; | |
| } | |
| /* | |
| * Only send RECORD_AUX if we have something useful to communicate | |
| * | |
| * Note: the OVERWRITE records by themselves are not considered | |
| * useful, as they don't communicate any *new* information, | |
| * aside from the short-lived offset, that becomes history at | |
| * the next event sched-in and therefore isn't useful. | |
| * The userspace that needs to copy out AUX data in overwrite | |
| * mode should know to use user_page::aux_head for the actual | |
| * offset. So, from now on we don't output AUX records that | |
| * have *only* OVERWRITE flag set. | |
| */ | |
| if (size || (handle->aux_flags & ~(u64)PERF_AUX_FLAG_OVERWRITE)) | |
| perf_event_aux_event(handle->event, aux_head, size, | |
| handle->aux_flags); | |
| WRITE_ONCE(rb->user_page->aux_head, rb->aux_head); | |
| if (rb_need_aux_wakeup(rb)) | |
| wakeup = true; | |
| if (wakeup) { | |
| if (handle->aux_flags & PERF_AUX_FLAG_TRUNCATED) | |
| perf_event_disable_inatomic(handle->event); | |
| perf_output_wakeup(handle); | |
| } | |
| handle->event = NULL; | |
| WRITE_ONCE(rb->aux_nest, 0); | |
| /* can't be last */ | |
| rb_free_aux(rb); | |
| ring_buffer_put(rb); | |
| } | |
| EXPORT_SYMBOL_GPL(perf_aux_output_end); | |
| /* | |
| * Skip over a given number of bytes in the AUX buffer, due to, for example, | |
| * hardware's alignment constraints. | |
| */ | |
| int perf_aux_output_skip(struct perf_output_handle *handle, unsigned long size) | |
| { | |
| struct perf_buffer *rb = handle->rb; | |
| if (size > handle->size) | |
| return -ENOSPC; | |
| rb->aux_head += size; | |
| WRITE_ONCE(rb->user_page->aux_head, rb->aux_head); | |
| if (rb_need_aux_wakeup(rb)) { | |
| perf_output_wakeup(handle); | |
| handle->wakeup = rb->aux_wakeup + rb->aux_watermark; | |
| } | |
| handle->head = rb->aux_head; | |
| handle->size -= size; | |
| return 0; | |
| } | |
| EXPORT_SYMBOL_GPL(perf_aux_output_skip); | |
| void *perf_get_aux(struct perf_output_handle *handle) | |
| { | |
| /* this is only valid between perf_aux_output_begin and *_end */ | |
| if (!handle->event) | |
| return NULL; | |
| return handle->rb->aux_priv; | |
| } | |
| EXPORT_SYMBOL_GPL(perf_get_aux); | |
| /* | |
| * Copy out AUX data from an AUX handle. | |
| */ | |
| long perf_output_copy_aux(struct perf_output_handle *aux_handle, | |
| struct perf_output_handle *handle, | |
| unsigned long from, unsigned long to) | |
| { | |
| struct perf_buffer *rb = aux_handle->rb; | |
| unsigned long tocopy, remainder, len = 0; | |
| void *addr; | |
| from &= (rb->aux_nr_pages << PAGE_SHIFT) - 1; | |
| to &= (rb->aux_nr_pages << PAGE_SHIFT) - 1; | |
| do { | |
| tocopy = PAGE_SIZE - offset_in_page(from); | |
| if (to > from) | |
| tocopy = min(tocopy, to - from); | |
| if (!tocopy) | |
| break; | |
| addr = rb->aux_pages[from >> PAGE_SHIFT]; | |
| addr += offset_in_page(from); | |
| remainder = perf_output_copy(handle, addr, tocopy); | |
| if (remainder) | |
| return -EFAULT; | |
| len += tocopy; | |
| from += tocopy; | |
| from &= (rb->aux_nr_pages << PAGE_SHIFT) - 1; | |
| } while (to != from); | |
| return len; | |
| } | |
| #define PERF_AUX_GFP (GFP_KERNEL | __GFP_ZERO | __GFP_NOWARN | __GFP_NORETRY) | |
| static struct page *rb_alloc_aux_page(int node, int order) | |
| { | |
| struct page *page; | |
| if (order > MAX_PAGE_ORDER) | |
| order = MAX_PAGE_ORDER; | |
| do { | |
| page = alloc_pages_node(node, PERF_AUX_GFP, order); | |
| } while (!page && order--); | |
| if (page && order) { | |
| /* | |
| * Communicate the allocation size to the driver: | |
| * if we managed to secure a high-order allocation, | |
| * set its first page's private to this order; | |
| * !PagePrivate(page) means it's just a normal page. | |
| */ | |
| split_page(page, order); | |
| SetPagePrivate(page); | |
| set_page_private(page, order); | |
| } | |
| return page; | |
| } | |
| static void rb_free_aux_page(struct perf_buffer *rb, int idx) | |
| { | |
| struct page *page = virt_to_page(rb->aux_pages[idx]); | |
| ClearPagePrivate(page); | |
| __free_page(page); | |
| } | |
| static void __rb_free_aux(struct perf_buffer *rb) | |
| { | |
| int pg; | |
| /* | |
| * Should never happen, the last reference should be dropped from | |
| * perf_mmap_close() path, which first stops aux transactions (which | |
| * in turn are the atomic holders of aux_refcount) and then does the | |
| * last rb_free_aux(). | |
| */ | |
| WARN_ON_ONCE(in_atomic()); | |
| if (rb->aux_priv) { | |
| rb->free_aux(rb->aux_priv); | |
| rb->free_aux = NULL; | |
| rb->aux_priv = NULL; | |
| } | |
| if (rb->aux_nr_pages) { | |
| for (pg = 0; pg < rb->aux_nr_pages; pg++) | |
| rb_free_aux_page(rb, pg); | |
| kfree(rb->aux_pages); | |
| rb->aux_nr_pages = 0; | |
| } | |
| } | |
| int rb_alloc_aux(struct perf_buffer *rb, struct perf_event *event, | |
| pgoff_t pgoff, int nr_pages, long watermark, int flags) | |
| { | |
| bool overwrite = !(flags & RING_BUFFER_WRITABLE); | |
| int node = (event->cpu == -1) ? -1 : cpu_to_node(event->cpu); | |
| bool use_contiguous_pages = event->pmu->capabilities & ( | |
| PERF_PMU_CAP_AUX_NO_SG | PERF_PMU_CAP_AUX_PREFER_LARGE); | |
| /* | |
| * Initialize max_order to 0 for page allocation. This allocates single | |
| * pages to minimize memory fragmentation. This is overridden if the | |
| * PMU needs or prefers contiguous pages (use_contiguous_pages = true). | |
| */ | |
| int max_order = 0; | |
| int ret = -ENOMEM; | |
| if (!has_aux(event)) | |
| return -EOPNOTSUPP; | |
| if (nr_pages <= 0) | |
| return -EINVAL; | |
| if (!overwrite) { | |
| /* | |
| * Watermark defaults to half the buffer, to aid PMU drivers | |
| * in double buffering. | |
| */ | |
| if (!watermark) | |
| watermark = min_t(unsigned long, | |
| U32_MAX, | |
| (unsigned long)nr_pages << (PAGE_SHIFT - 1)); | |
| /* | |
| * If using contiguous pages, use aux_watermark as the basis | |
| * for chunking to help PMU drivers honor the watermark. | |
| */ | |
| if (use_contiguous_pages) | |
| max_order = get_order(watermark); | |
| } else { | |
| /* | |
| * If using contiguous pages, we need to start with the | |
| * max_order that fits in nr_pages, not the other way around, | |
| * hence ilog2() and not get_order. | |
| */ | |
| if (use_contiguous_pages) | |
| max_order = ilog2(nr_pages); | |
| watermark = 0; | |
| } | |
| /* | |
| * kcalloc_node() is unable to allocate buffer if the size is larger | |
| * than: PAGE_SIZE << MAX_PAGE_ORDER; directly bail out in this case. | |
| */ | |
| if (get_order((unsigned long)nr_pages * sizeof(void *)) > MAX_PAGE_ORDER) | |
| return -ENOMEM; | |
| rb->aux_pages = kcalloc_node(nr_pages, sizeof(void *), GFP_KERNEL, | |
| node); | |
| if (!rb->aux_pages) | |
| return -ENOMEM; | |
| rb->free_aux = event->pmu->free_aux; | |
| for (rb->aux_nr_pages = 0; rb->aux_nr_pages < nr_pages;) { | |
| struct page *page; | |
| int last, order; | |
| order = min(max_order, ilog2(nr_pages - rb->aux_nr_pages)); | |
| page = rb_alloc_aux_page(node, order); | |
| if (!page) | |
| goto out; | |
| for (last = rb->aux_nr_pages + (1 << page_private(page)); | |
| last > rb->aux_nr_pages; rb->aux_nr_pages++) | |
| rb->aux_pages[rb->aux_nr_pages] = page_address(page++); | |
| } | |
| /* | |
| * In overwrite mode, PMUs that don't support SG may not handle more | |
| * than one contiguous allocation, since they rely on PMI to do double | |
| * buffering. In this case, the entire buffer has to be one contiguous | |
| * chunk. | |
| */ | |
| if ((event->pmu->capabilities & PERF_PMU_CAP_AUX_NO_SG) && | |
| overwrite) { | |
| struct page *page = virt_to_page(rb->aux_pages[0]); | |
| if (page_private(page) != max_order) | |
| goto out; | |
| } | |
| rb->aux_priv = event->pmu->setup_aux(event, rb->aux_pages, nr_pages, | |
| overwrite); | |
| if (!rb->aux_priv) | |
| goto out; | |
| ret = 0; | |
| /* | |
| * aux_pages (and pmu driver's private data, aux_priv) will be | |
| * referenced in both producer's and consumer's contexts, thus | |
| * we keep a refcount here to make sure either of the two can | |
| * reference them safely. | |
| */ | |
| refcount_set(&rb->aux_refcount, 1); | |
| rb->aux_overwrite = overwrite; | |
| rb->aux_watermark = watermark; | |
| out: | |
| if (!ret) | |
| rb->aux_pgoff = pgoff; | |
| else | |
| __rb_free_aux(rb); | |
| return ret; | |
| } | |
| void rb_free_aux(struct perf_buffer *rb) | |
| { | |
| if (refcount_dec_and_test(&rb->aux_refcount)) | |
| __rb_free_aux(rb); | |
| } | |
| #ifndef CONFIG_PERF_USE_VMALLOC | |
| /* | |
| * Back perf_mmap() with regular GFP_KERNEL-0 pages. | |
| */ | |
| static struct page * | |
| __perf_mmap_to_page(struct perf_buffer *rb, unsigned long pgoff) | |
| { | |
| if (pgoff > rb->nr_pages) | |
| return NULL; | |
| if (pgoff == 0) | |
| return virt_to_page(rb->user_page); | |
| return virt_to_page(rb->data_pages[pgoff - 1]); | |
| } | |
| static void *perf_mmap_alloc_page(int cpu) | |
| { | |
| struct page *page; | |
| int node; | |
| node = (cpu == -1) ? cpu : cpu_to_node(cpu); | |
| page = alloc_pages_node(node, GFP_KERNEL | __GFP_ZERO, 0); | |
| if (!page) | |
| return NULL; | |
| return page_address(page); | |
| } | |
| static void perf_mmap_free_page(void *addr) | |
| { | |
| struct page *page = virt_to_page(addr); | |
| __free_page(page); | |
| } | |
| struct perf_buffer *rb_alloc(int nr_pages, long watermark, int cpu, int flags) | |
| { | |
| struct perf_buffer *rb; | |
| unsigned long size; | |
| int i, node; | |
| size = sizeof(struct perf_buffer); | |
| size += nr_pages * sizeof(void *); | |
| if (order_base_2(size) > PAGE_SHIFT+MAX_PAGE_ORDER) | |
| goto fail; | |
| node = (cpu == -1) ? cpu : cpu_to_node(cpu); | |
| rb = kzalloc_node(size, GFP_KERNEL, node); | |
| if (!rb) | |
| goto fail; | |
| rb->user_page = perf_mmap_alloc_page(cpu); | |
| if (!rb->user_page) | |
| goto fail_user_page; | |
| for (i = 0; i < nr_pages; i++) { | |
| rb->data_pages[i] = perf_mmap_alloc_page(cpu); | |
| if (!rb->data_pages[i]) | |
| goto fail_data_pages; | |
| } | |
| rb->nr_pages = nr_pages; | |
| ring_buffer_init(rb, watermark, flags); | |
| return rb; | |
| fail_data_pages: | |
| for (i--; i >= 0; i--) | |
| perf_mmap_free_page(rb->data_pages[i]); | |
| perf_mmap_free_page(rb->user_page); | |
| fail_user_page: | |
| kfree(rb); | |
| fail: | |
| return NULL; | |
| } | |
| void rb_free(struct perf_buffer *rb) | |
| { | |
| int i; | |
| perf_mmap_free_page(rb->user_page); | |
| for (i = 0; i < rb->nr_pages; i++) | |
| perf_mmap_free_page(rb->data_pages[i]); | |
| kfree(rb); | |
| } | |
| #else | |
| static struct page * | |
| __perf_mmap_to_page(struct perf_buffer *rb, unsigned long pgoff) | |
| { | |
| /* The '>' counts in the user page. */ | |
| if (pgoff > data_page_nr(rb)) | |
| return NULL; | |
| return vmalloc_to_page((void *)rb->user_page + pgoff * PAGE_SIZE); | |
| } | |
| static void rb_free_work(struct work_struct *work) | |
| { | |
| struct perf_buffer *rb; | |
| rb = container_of(work, struct perf_buffer, work); | |
| vfree(rb->user_page); | |
| kfree(rb); | |
| } | |
| void rb_free(struct perf_buffer *rb) | |
| { | |
| schedule_work(&rb->work); | |
| } | |
| struct perf_buffer *rb_alloc(int nr_pages, long watermark, int cpu, int flags) | |
| { | |
| struct perf_buffer *rb; | |
| unsigned long size; | |
| void *all_buf; | |
| int node; | |
| size = sizeof(struct perf_buffer); | |
| size += sizeof(void *); | |
| node = (cpu == -1) ? cpu : cpu_to_node(cpu); | |
| rb = kzalloc_node(size, GFP_KERNEL, node); | |
| if (!rb) | |
| goto fail; | |
| INIT_WORK(&rb->work, rb_free_work); | |
| all_buf = vmalloc_user((nr_pages + 1) * PAGE_SIZE); | |
| if (!all_buf) | |
| goto fail_all_buf; | |
| rb->user_page = all_buf; | |
| rb->data_pages[0] = all_buf + PAGE_SIZE; | |
| if (nr_pages) { | |
| rb->nr_pages = 1; | |
| rb->page_order = ilog2(nr_pages); | |
| } | |
| ring_buffer_init(rb, watermark, flags); | |
| return rb; | |
| fail_all_buf: | |
| kfree(rb); | |
| fail: | |
| return NULL; | |
| } | |
| #endif | |
| struct page * | |
| perf_mmap_to_page(struct perf_buffer *rb, unsigned long pgoff) | |
| { | |
| if (rb->aux_nr_pages) { | |
| /* above AUX space */ | |
| if (pgoff > rb->aux_pgoff + rb->aux_nr_pages) | |
| return NULL; | |
| /* AUX space */ | |
| if (pgoff >= rb->aux_pgoff) { | |
| int aux_pgoff = array_index_nospec(pgoff - rb->aux_pgoff, rb->aux_nr_pages); | |
| return virt_to_page(rb->aux_pages[aux_pgoff]); | |
| } | |
| } | |
| return __perf_mmap_to_page(rb, pgoff); | |
| } |