| /* SPDX-License-Identifier: GPL-2.0+ */ | |
| /* | |
| * Task-based RCU implementations. | |
| * | |
| * Copyright (C) 2020 Paul E. McKenney | |
| */ | |
| #ifdef CONFIG_TASKS_RCU_GENERIC | |
| #include "rcu_segcblist.h" | |
| //////////////////////////////////////////////////////////////////////// | |
| // | |
| // Generic data structures. | |
| struct rcu_tasks; | |
| typedef void (*rcu_tasks_gp_func_t)(struct rcu_tasks *rtp); | |
| typedef void (*pregp_func_t)(struct list_head *hop); | |
| typedef void (*pertask_func_t)(struct task_struct *t, struct list_head *hop); | |
| typedef void (*postscan_func_t)(struct list_head *hop); | |
| typedef void (*holdouts_func_t)(struct list_head *hop, bool ndrpt, bool *frptp); | |
| typedef void (*postgp_func_t)(struct rcu_tasks *rtp); | |
| /** | |
| * struct rcu_tasks_percpu - Per-CPU component of definition for a Tasks-RCU-like mechanism. | |
| * @cblist: Callback list. | |
| * @lock: Lock protecting per-CPU callback list. | |
| * @rtp_jiffies: Jiffies counter value for statistics. | |
| * @lazy_timer: Timer to unlazify callbacks. | |
| * @urgent_gp: Number of additional non-lazy grace periods. | |
| * @rtp_n_lock_retries: Rough lock-contention statistic. | |
| * @rtp_work: Work queue for invoking callbacks. | |
| * @rtp_irq_work: IRQ work queue for deferred wakeups. | |
| * @barrier_q_head: RCU callback for barrier operation. | |
| * @rtp_blkd_tasks: List of tasks blocked as readers. | |
| * @rtp_exit_list: List of tasks in the latter portion of do_exit(). | |
| * @cpu: CPU number corresponding to this entry. | |
| * @index: Index of this CPU in rtpcp_array of the rcu_tasks structure. | |
| * @rtpp: Pointer to the rcu_tasks structure. | |
| */ | |
| struct rcu_tasks_percpu { | |
| struct rcu_segcblist cblist; | |
| raw_spinlock_t __private lock; | |
| unsigned long rtp_jiffies; | |
| unsigned long rtp_n_lock_retries; | |
| struct timer_list lazy_timer; | |
| unsigned int urgent_gp; | |
| struct work_struct rtp_work; | |
| struct irq_work rtp_irq_work; | |
| struct rcu_head barrier_q_head; | |
| struct list_head rtp_blkd_tasks; | |
| struct list_head rtp_exit_list; | |
| int cpu; | |
| int index; | |
| struct rcu_tasks *rtpp; | |
| }; | |
| /** | |
| * struct rcu_tasks - Definition for a Tasks-RCU-like mechanism. | |
| * @cbs_wait: RCU wait allowing a new callback to get kthread's attention. | |
| * @cbs_gbl_lock: Lock protecting callback list. | |
| * @tasks_gp_mutex: Mutex protecting grace period, needed during mid-boot dead zone. | |
| * @gp_func: This flavor's grace-period-wait function. | |
| * @gp_state: Grace period's most recent state transition (debugging). | |
| * @gp_sleep: Per-grace-period sleep to prevent CPU-bound looping. | |
| * @init_fract: Initial backoff sleep interval. | |
| * @gp_jiffies: Time of last @gp_state transition. | |
| * @gp_start: Most recent grace-period start in jiffies. | |
| * @tasks_gp_seq: Number of grace periods completed since boot in upper bits. | |
| * @n_ipis: Number of IPIs sent to encourage grace periods to end. | |
| * @n_ipis_fails: Number of IPI-send failures. | |
| * @kthread_ptr: This flavor's grace-period/callback-invocation kthread. | |
| * @lazy_jiffies: Number of jiffies to allow callbacks to be lazy. | |
| * @pregp_func: This flavor's pre-grace-period function (optional). | |
| * @pertask_func: This flavor's per-task scan function (optional). | |
| * @postscan_func: This flavor's post-task scan function (optional). | |
| * @holdouts_func: This flavor's holdout-list scan function (optional). | |
| * @postgp_func: This flavor's post-grace-period function (optional). | |
| * @call_func: This flavor's call_rcu()-equivalent function. | |
| * @wait_state: Task state for synchronous grace-period waits (default TASK_UNINTERRUPTIBLE). | |
| * @rtpcpu: This flavor's rcu_tasks_percpu structure. | |
| * @rtpcp_array: Array of pointers to rcu_tasks_percpu structure of CPUs in cpu_possible_mask. | |
| * @percpu_enqueue_shift: Shift down CPU ID this much when enqueuing callbacks. | |
| * @percpu_enqueue_lim: Number of per-CPU callback queues in use for enqueuing. | |
| * @percpu_dequeue_lim: Number of per-CPU callback queues in use for dequeuing. | |
| * @percpu_dequeue_gpseq: RCU grace-period number to propagate enqueue limit to dequeuers. | |
| * @barrier_q_mutex: Serialize barrier operations. | |
| * @barrier_q_count: Number of queues being waited on. | |
| * @barrier_q_completion: Barrier wait/wakeup mechanism. | |
| * @barrier_q_seq: Sequence number for barrier operations. | |
| * @barrier_q_start: Most recent barrier start in jiffies. | |
| * @name: This flavor's textual name. | |
| * @kname: This flavor's kthread name. | |
| */ | |
| struct rcu_tasks { | |
| struct rcuwait cbs_wait; | |
| raw_spinlock_t cbs_gbl_lock; | |
| struct mutex tasks_gp_mutex; | |
| int gp_state; | |
| int gp_sleep; | |
| int init_fract; | |
| unsigned long gp_jiffies; | |
| unsigned long gp_start; | |
| unsigned long tasks_gp_seq; | |
| unsigned long n_ipis; | |
| unsigned long n_ipis_fails; | |
| struct task_struct *kthread_ptr; | |
| unsigned long lazy_jiffies; | |
| rcu_tasks_gp_func_t gp_func; | |
| pregp_func_t pregp_func; | |
| pertask_func_t pertask_func; | |
| postscan_func_t postscan_func; | |
| holdouts_func_t holdouts_func; | |
| postgp_func_t postgp_func; | |
| call_rcu_func_t call_func; | |
| unsigned int wait_state; | |
| struct rcu_tasks_percpu __percpu *rtpcpu; | |
| struct rcu_tasks_percpu **rtpcp_array; | |
| int percpu_enqueue_shift; | |
| int percpu_enqueue_lim; | |
| int percpu_dequeue_lim; | |
| unsigned long percpu_dequeue_gpseq; | |
| struct mutex barrier_q_mutex; | |
| atomic_t barrier_q_count; | |
| struct completion barrier_q_completion; | |
| unsigned long barrier_q_seq; | |
| unsigned long barrier_q_start; | |
| char *name; | |
| char *kname; | |
| }; | |
| static void call_rcu_tasks_iw_wakeup(struct irq_work *iwp); | |
| #define DEFINE_RCU_TASKS(rt_name, gp, call, n) \ | |
| static DEFINE_PER_CPU(struct rcu_tasks_percpu, rt_name ## __percpu) = { \ | |
| .lock = __RAW_SPIN_LOCK_UNLOCKED(rt_name ## __percpu.cbs_pcpu_lock), \ | |
| .rtp_irq_work = IRQ_WORK_INIT_HARD(call_rcu_tasks_iw_wakeup), \ | |
| }; \ | |
| static struct rcu_tasks rt_name = \ | |
| { \ | |
| .cbs_wait = __RCUWAIT_INITIALIZER(rt_name.wait), \ | |
| .cbs_gbl_lock = __RAW_SPIN_LOCK_UNLOCKED(rt_name.cbs_gbl_lock), \ | |
| .tasks_gp_mutex = __MUTEX_INITIALIZER(rt_name.tasks_gp_mutex), \ | |
| .gp_func = gp, \ | |
| .call_func = call, \ | |
| .wait_state = TASK_UNINTERRUPTIBLE, \ | |
| .rtpcpu = &rt_name ## __percpu, \ | |
| .lazy_jiffies = DIV_ROUND_UP(HZ, 4), \ | |
| .name = n, \ | |
| .percpu_enqueue_shift = order_base_2(CONFIG_NR_CPUS), \ | |
| .percpu_enqueue_lim = 1, \ | |
| .percpu_dequeue_lim = 1, \ | |
| .barrier_q_mutex = __MUTEX_INITIALIZER(rt_name.barrier_q_mutex), \ | |
| .barrier_q_seq = (0UL - 50UL) << RCU_SEQ_CTR_SHIFT, \ | |
| .kname = #rt_name, \ | |
| } | |
| #ifdef CONFIG_TASKS_RCU | |
| /* Report delay of scan exiting tasklist in rcu_tasks_postscan(). */ | |
| static void tasks_rcu_exit_srcu_stall(struct timer_list *unused); | |
| static DEFINE_TIMER(tasks_rcu_exit_srcu_stall_timer, tasks_rcu_exit_srcu_stall); | |
| #endif | |
| /* Control stall timeouts. Disable with <= 0, otherwise jiffies till stall. */ | |
| #define RCU_TASK_BOOT_STALL_TIMEOUT (HZ * 30) | |
| #define RCU_TASK_STALL_TIMEOUT (HZ * 60 * 10) | |
| static int rcu_task_stall_timeout __read_mostly = RCU_TASK_STALL_TIMEOUT; | |
| module_param(rcu_task_stall_timeout, int, 0644); | |
| #define RCU_TASK_STALL_INFO (HZ * 10) | |
| static int rcu_task_stall_info __read_mostly = RCU_TASK_STALL_INFO; | |
| module_param(rcu_task_stall_info, int, 0644); | |
| static int rcu_task_stall_info_mult __read_mostly = 3; | |
| module_param(rcu_task_stall_info_mult, int, 0444); | |
| static int rcu_task_enqueue_lim __read_mostly = -1; | |
| module_param(rcu_task_enqueue_lim, int, 0444); | |
| static bool rcu_task_cb_adjust; | |
| static int rcu_task_contend_lim __read_mostly = 100; | |
| module_param(rcu_task_contend_lim, int, 0444); | |
| static int rcu_task_collapse_lim __read_mostly = 10; | |
| module_param(rcu_task_collapse_lim, int, 0444); | |
| static int rcu_task_lazy_lim __read_mostly = 32; | |
| module_param(rcu_task_lazy_lim, int, 0444); | |
| static int rcu_task_cpu_ids; | |
| /* RCU tasks grace-period state for debugging. */ | |
| #define RTGS_INIT 0 | |
| #define RTGS_WAIT_WAIT_CBS 1 | |
| #define RTGS_WAIT_GP 2 | |
| #define RTGS_PRE_WAIT_GP 3 | |
| #define RTGS_SCAN_TASKLIST 4 | |
| #define RTGS_POST_SCAN_TASKLIST 5 | |
| #define RTGS_WAIT_SCAN_HOLDOUTS 6 | |
| #define RTGS_SCAN_HOLDOUTS 7 | |
| #define RTGS_POST_GP 8 | |
| #define RTGS_WAIT_READERS 9 | |
| #define RTGS_INVOKE_CBS 10 | |
| #define RTGS_WAIT_CBS 11 | |
| #ifndef CONFIG_TINY_RCU | |
| static const char * const rcu_tasks_gp_state_names[] = { | |
| "RTGS_INIT", | |
| "RTGS_WAIT_WAIT_CBS", | |
| "RTGS_WAIT_GP", | |
| "RTGS_PRE_WAIT_GP", | |
| "RTGS_SCAN_TASKLIST", | |
| "RTGS_POST_SCAN_TASKLIST", | |
| "RTGS_WAIT_SCAN_HOLDOUTS", | |
| "RTGS_SCAN_HOLDOUTS", | |
| "RTGS_POST_GP", | |
| "RTGS_WAIT_READERS", | |
| "RTGS_INVOKE_CBS", | |
| "RTGS_WAIT_CBS", | |
| }; | |
| #endif /* #ifndef CONFIG_TINY_RCU */ | |
| //////////////////////////////////////////////////////////////////////// | |
| // | |
| // Generic code. | |
| static void rcu_tasks_invoke_cbs_wq(struct work_struct *wp); | |
| /* Record grace-period phase and time. */ | |
| static void set_tasks_gp_state(struct rcu_tasks *rtp, int newstate) | |
| { | |
| rtp->gp_state = newstate; | |
| rtp->gp_jiffies = jiffies; | |
| } | |
| #ifndef CONFIG_TINY_RCU | |
| /* Return state name. */ | |
| static const char *tasks_gp_state_getname(struct rcu_tasks *rtp) | |
| { | |
| int i = data_race(rtp->gp_state); // Let KCSAN detect update races | |
| int j = READ_ONCE(i); // Prevent the compiler from reading twice | |
| if (j >= ARRAY_SIZE(rcu_tasks_gp_state_names)) | |
| return "???"; | |
| return rcu_tasks_gp_state_names[j]; | |
| } | |
| #endif /* #ifndef CONFIG_TINY_RCU */ | |
| // Initialize per-CPU callback lists for the specified flavor of | |
| // Tasks RCU. Do not enqueue callbacks before this function is invoked. | |
| static void cblist_init_generic(struct rcu_tasks *rtp) | |
| { | |
| int cpu; | |
| int lim; | |
| int shift; | |
| int maxcpu; | |
| int index = 0; | |
| if (rcu_task_enqueue_lim < 0) { | |
| rcu_task_enqueue_lim = 1; | |
| rcu_task_cb_adjust = true; | |
| } else if (rcu_task_enqueue_lim == 0) { | |
| rcu_task_enqueue_lim = 1; | |
| } | |
| lim = rcu_task_enqueue_lim; | |
| rtp->rtpcp_array = kzalloc_objs(struct rcu_tasks_percpu *, | |
| num_possible_cpus()); | |
| BUG_ON(!rtp->rtpcp_array); | |
| for_each_possible_cpu(cpu) { | |
| struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); | |
| WARN_ON_ONCE(!rtpcp); | |
| if (cpu) | |
| raw_spin_lock_init(&ACCESS_PRIVATE(rtpcp, lock)); | |
| if (rcu_segcblist_empty(&rtpcp->cblist)) | |
| rcu_segcblist_init(&rtpcp->cblist); | |
| INIT_WORK(&rtpcp->rtp_work, rcu_tasks_invoke_cbs_wq); | |
| rtpcp->cpu = cpu; | |
| rtpcp->rtpp = rtp; | |
| rtpcp->index = index; | |
| rtp->rtpcp_array[index] = rtpcp; | |
| index++; | |
| if (!rtpcp->rtp_blkd_tasks.next) | |
| INIT_LIST_HEAD(&rtpcp->rtp_blkd_tasks); | |
| if (!rtpcp->rtp_exit_list.next) | |
| INIT_LIST_HEAD(&rtpcp->rtp_exit_list); | |
| rtpcp->barrier_q_head.next = &rtpcp->barrier_q_head; | |
| maxcpu = cpu; | |
| } | |
| rcu_task_cpu_ids = maxcpu + 1; | |
| if (lim > rcu_task_cpu_ids) | |
| lim = rcu_task_cpu_ids; | |
| shift = ilog2(rcu_task_cpu_ids / lim); | |
| if (((rcu_task_cpu_ids - 1) >> shift) >= lim) | |
| shift++; | |
| rtp->percpu_enqueue_shift = shift; | |
| rtp->percpu_dequeue_lim = lim; | |
| rtp->percpu_enqueue_lim = lim; | |
| pr_info("%s: Setting shift to %d and lim to %d rcu_task_cb_adjust=%d rcu_task_cpu_ids=%d.\n", | |
| rtp->name, data_race(rtp->percpu_enqueue_shift), data_race(rtp->percpu_enqueue_lim), | |
| rcu_task_cb_adjust, rcu_task_cpu_ids); | |
| } | |
| // Compute wakeup time for lazy callback timer. | |
| static unsigned long rcu_tasks_lazy_time(struct rcu_tasks *rtp) | |
| { | |
| return jiffies + rtp->lazy_jiffies; | |
| } | |
| // Timer handler that unlazifies lazy callbacks. | |
| static void call_rcu_tasks_generic_timer(struct timer_list *tlp) | |
| { | |
| unsigned long flags; | |
| bool needwake = false; | |
| struct rcu_tasks *rtp; | |
| struct rcu_tasks_percpu *rtpcp = timer_container_of(rtpcp, tlp, | |
| lazy_timer); | |
| rtp = rtpcp->rtpp; | |
| raw_spin_lock_irqsave_rcu_node(rtpcp, flags); | |
| if (!rcu_segcblist_empty(&rtpcp->cblist) && rtp->lazy_jiffies) { | |
| if (!rtpcp->urgent_gp) | |
| rtpcp->urgent_gp = 1; | |
| needwake = true; | |
| mod_timer(&rtpcp->lazy_timer, rcu_tasks_lazy_time(rtp)); | |
| } | |
| raw_spin_unlock_irqrestore_rcu_node(rtpcp, flags); | |
| if (needwake) | |
| rcuwait_wake_up(&rtp->cbs_wait); | |
| } | |
| // IRQ-work handler that does deferred wakeup for call_rcu_tasks_generic(). | |
| static void call_rcu_tasks_iw_wakeup(struct irq_work *iwp) | |
| { | |
| struct rcu_tasks *rtp; | |
| struct rcu_tasks_percpu *rtpcp = container_of(iwp, struct rcu_tasks_percpu, rtp_irq_work); | |
| rtp = rtpcp->rtpp; | |
| rcuwait_wake_up(&rtp->cbs_wait); | |
| } | |
| // Enqueue a callback for the specified flavor of Tasks RCU. | |
| static void call_rcu_tasks_generic(struct rcu_head *rhp, rcu_callback_t func, | |
| struct rcu_tasks *rtp) | |
| { | |
| int chosen_cpu; | |
| unsigned long flags; | |
| bool havekthread = smp_load_acquire(&rtp->kthread_ptr); | |
| int ideal_cpu; | |
| unsigned long j; | |
| bool needadjust = false; | |
| bool needwake; | |
| struct rcu_tasks_percpu *rtpcp; | |
| rhp->next = NULL; | |
| rhp->func = func; | |
| local_irq_save(flags); | |
| rcu_read_lock(); | |
| ideal_cpu = smp_processor_id() >> READ_ONCE(rtp->percpu_enqueue_shift); | |
| chosen_cpu = cpumask_next(ideal_cpu - 1, cpu_possible_mask); | |
| WARN_ON_ONCE(chosen_cpu >= rcu_task_cpu_ids); | |
| rtpcp = per_cpu_ptr(rtp->rtpcpu, chosen_cpu); | |
| if (!raw_spin_trylock_rcu_node(rtpcp)) { // irqs already disabled. | |
| raw_spin_lock_rcu_node(rtpcp); // irqs already disabled. | |
| j = jiffies; | |
| if (rtpcp->rtp_jiffies != j) { | |
| rtpcp->rtp_jiffies = j; | |
| rtpcp->rtp_n_lock_retries = 0; | |
| } | |
| if (rcu_task_cb_adjust && ++rtpcp->rtp_n_lock_retries > rcu_task_contend_lim && | |
| READ_ONCE(rtp->percpu_enqueue_lim) != rcu_task_cpu_ids) | |
| needadjust = true; // Defer adjustment to avoid deadlock. | |
| } | |
| // Queuing callbacks before initialization not yet supported. | |
| if (WARN_ON_ONCE(!rcu_segcblist_is_enabled(&rtpcp->cblist))) | |
| rcu_segcblist_init(&rtpcp->cblist); | |
| needwake = (!havekthread && rcu_segcblist_empty(&rtpcp->cblist)) || | |
| (func == wakeme_after_rcu) || | |
| (rcu_segcblist_n_cbs(&rtpcp->cblist) == rcu_task_lazy_lim); | |
| if (havekthread && !needwake && !timer_pending(&rtpcp->lazy_timer)) { | |
| if (rtp->lazy_jiffies) | |
| mod_timer(&rtpcp->lazy_timer, rcu_tasks_lazy_time(rtp)); | |
| else | |
| needwake = rcu_segcblist_empty(&rtpcp->cblist); | |
| } | |
| if (needwake) | |
| rtpcp->urgent_gp = 3; | |
| rcu_segcblist_enqueue(&rtpcp->cblist, rhp); | |
| raw_spin_unlock_irqrestore_rcu_node(rtpcp, flags); | |
| if (unlikely(needadjust)) { | |
| raw_spin_lock_irqsave(&rtp->cbs_gbl_lock, flags); | |
| if (rtp->percpu_enqueue_lim != rcu_task_cpu_ids) { | |
| WRITE_ONCE(rtp->percpu_enqueue_shift, 0); | |
| WRITE_ONCE(rtp->percpu_dequeue_lim, rcu_task_cpu_ids); | |
| smp_store_release(&rtp->percpu_enqueue_lim, rcu_task_cpu_ids); | |
| pr_info("Switching %s to per-CPU callback queuing.\n", rtp->name); | |
| } | |
| raw_spin_unlock_irqrestore(&rtp->cbs_gbl_lock, flags); | |
| } | |
| rcu_read_unlock(); | |
| /* We can't create the thread unless interrupts are enabled. */ | |
| if (needwake && READ_ONCE(rtp->kthread_ptr)) | |
| irq_work_queue(&rtpcp->rtp_irq_work); | |
| } | |
| // RCU callback function for rcu_barrier_tasks_generic(). | |
| static void rcu_barrier_tasks_generic_cb(struct rcu_head *rhp) | |
| { | |
| struct rcu_tasks *rtp; | |
| struct rcu_tasks_percpu *rtpcp; | |
| rhp->next = rhp; // Mark the callback as having been invoked. | |
| rtpcp = container_of(rhp, struct rcu_tasks_percpu, barrier_q_head); | |
| rtp = rtpcp->rtpp; | |
| if (atomic_dec_and_test(&rtp->barrier_q_count)) | |
| complete(&rtp->barrier_q_completion); | |
| } | |
| // Wait for all in-flight callbacks for the specified RCU Tasks flavor. | |
| // Operates in a manner similar to rcu_barrier(). | |
| static void __maybe_unused rcu_barrier_tasks_generic(struct rcu_tasks *rtp) | |
| { | |
| int cpu; | |
| unsigned long flags; | |
| struct rcu_tasks_percpu *rtpcp; | |
| unsigned long s = rcu_seq_snap(&rtp->barrier_q_seq); | |
| mutex_lock(&rtp->barrier_q_mutex); | |
| if (rcu_seq_done(&rtp->barrier_q_seq, s)) { | |
| smp_mb(); | |
| mutex_unlock(&rtp->barrier_q_mutex); | |
| return; | |
| } | |
| rtp->barrier_q_start = jiffies; | |
| rcu_seq_start(&rtp->barrier_q_seq); | |
| init_completion(&rtp->barrier_q_completion); | |
| atomic_set(&rtp->barrier_q_count, 2); | |
| for_each_possible_cpu(cpu) { | |
| if (cpu >= smp_load_acquire(&rtp->percpu_dequeue_lim)) | |
| break; | |
| rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); | |
| rtpcp->barrier_q_head.func = rcu_barrier_tasks_generic_cb; | |
| raw_spin_lock_irqsave_rcu_node(rtpcp, flags); | |
| if (rcu_segcblist_entrain(&rtpcp->cblist, &rtpcp->barrier_q_head)) | |
| atomic_inc(&rtp->barrier_q_count); | |
| raw_spin_unlock_irqrestore_rcu_node(rtpcp, flags); | |
| } | |
| if (atomic_sub_and_test(2, &rtp->barrier_q_count)) | |
| complete(&rtp->barrier_q_completion); | |
| wait_for_completion(&rtp->barrier_q_completion); | |
| rcu_seq_end(&rtp->barrier_q_seq); | |
| mutex_unlock(&rtp->barrier_q_mutex); | |
| } | |
| // Advance callbacks and indicate whether either a grace period or | |
| // callback invocation is needed. | |
| static int rcu_tasks_need_gpcb(struct rcu_tasks *rtp) | |
| { | |
| int cpu; | |
| int dequeue_limit; | |
| unsigned long flags; | |
| bool gpdone = poll_state_synchronize_rcu(rtp->percpu_dequeue_gpseq); | |
| long n; | |
| long ncbs = 0; | |
| long ncbsnz = 0; | |
| int needgpcb = 0; | |
| dequeue_limit = smp_load_acquire(&rtp->percpu_dequeue_lim); | |
| for (cpu = 0; cpu < dequeue_limit; cpu++) { | |
| if (!cpu_possible(cpu)) | |
| continue; | |
| struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); | |
| /* Advance and accelerate any new callbacks. */ | |
| if (!rcu_segcblist_n_cbs(&rtpcp->cblist)) | |
| continue; | |
| raw_spin_lock_irqsave_rcu_node(rtpcp, flags); | |
| // Should we shrink down to a single callback queue? | |
| n = rcu_segcblist_n_cbs(&rtpcp->cblist); | |
| if (n) { | |
| ncbs += n; | |
| if (cpu > 0) | |
| ncbsnz += n; | |
| } | |
| rcu_segcblist_advance(&rtpcp->cblist, rcu_seq_current(&rtp->tasks_gp_seq)); | |
| (void)rcu_segcblist_accelerate(&rtpcp->cblist, rcu_seq_snap(&rtp->tasks_gp_seq)); | |
| if (rtpcp->urgent_gp > 0 && rcu_segcblist_pend_cbs(&rtpcp->cblist)) { | |
| if (rtp->lazy_jiffies) | |
| rtpcp->urgent_gp--; | |
| needgpcb |= 0x3; | |
| } else if (rcu_segcblist_empty(&rtpcp->cblist)) { | |
| rtpcp->urgent_gp = 0; | |
| } | |
| if (rcu_segcblist_ready_cbs(&rtpcp->cblist)) | |
| needgpcb |= 0x1; | |
| raw_spin_unlock_irqrestore_rcu_node(rtpcp, flags); | |
| } | |
| // Shrink down to a single callback queue if appropriate. | |
| // This is done in two stages: (1) If there are no more than | |
| // rcu_task_collapse_lim callbacks on CPU 0 and none on any other | |
| // CPU, limit enqueueing to CPU 0. (2) After an RCU grace period, | |
| // if there has not been an increase in callbacks, limit dequeuing | |
| // to CPU 0. Note the matching RCU read-side critical section in | |
| // call_rcu_tasks_generic(). | |
| if (rcu_task_cb_adjust && ncbs <= rcu_task_collapse_lim) { | |
| raw_spin_lock_irqsave(&rtp->cbs_gbl_lock, flags); | |
| if (rtp->percpu_enqueue_lim > 1) { | |
| WRITE_ONCE(rtp->percpu_enqueue_shift, order_base_2(rcu_task_cpu_ids)); | |
| smp_store_release(&rtp->percpu_enqueue_lim, 1); | |
| rtp->percpu_dequeue_gpseq = get_state_synchronize_rcu(); | |
| gpdone = false; | |
| pr_info("Starting switch %s to CPU-0 callback queuing.\n", rtp->name); | |
| } | |
| raw_spin_unlock_irqrestore(&rtp->cbs_gbl_lock, flags); | |
| } | |
| if (rcu_task_cb_adjust && !ncbsnz && gpdone) { | |
| raw_spin_lock_irqsave(&rtp->cbs_gbl_lock, flags); | |
| if (rtp->percpu_enqueue_lim < rtp->percpu_dequeue_lim) { | |
| WRITE_ONCE(rtp->percpu_dequeue_lim, 1); | |
| pr_info("Completing switch %s to CPU-0 callback queuing.\n", rtp->name); | |
| } | |
| if (rtp->percpu_dequeue_lim == 1) { | |
| for (cpu = rtp->percpu_dequeue_lim; cpu < rcu_task_cpu_ids; cpu++) { | |
| if (!cpu_possible(cpu)) | |
| continue; | |
| struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); | |
| WARN_ON_ONCE(rcu_segcblist_n_cbs(&rtpcp->cblist)); | |
| } | |
| } | |
| raw_spin_unlock_irqrestore(&rtp->cbs_gbl_lock, flags); | |
| } | |
| return needgpcb; | |
| } | |
| // Advance callbacks and invoke any that are ready. | |
| static void rcu_tasks_invoke_cbs(struct rcu_tasks *rtp, struct rcu_tasks_percpu *rtpcp) | |
| { | |
| int cpuwq; | |
| unsigned long flags; | |
| int len; | |
| int index; | |
| struct rcu_head *rhp; | |
| struct rcu_cblist rcl = RCU_CBLIST_INITIALIZER(rcl); | |
| struct rcu_tasks_percpu *rtpcp_next; | |
| index = rtpcp->index * 2 + 1; | |
| if (index < num_possible_cpus()) { | |
| rtpcp_next = rtp->rtpcp_array[index]; | |
| if (rtpcp_next->cpu < smp_load_acquire(&rtp->percpu_dequeue_lim)) { | |
| cpuwq = rcu_cpu_beenfullyonline(rtpcp_next->cpu) ? rtpcp_next->cpu : WORK_CPU_UNBOUND; | |
| queue_work_on(cpuwq, system_percpu_wq, &rtpcp_next->rtp_work); | |
| index++; | |
| if (index < num_possible_cpus()) { | |
| rtpcp_next = rtp->rtpcp_array[index]; | |
| if (rtpcp_next->cpu < smp_load_acquire(&rtp->percpu_dequeue_lim)) { | |
| cpuwq = rcu_cpu_beenfullyonline(rtpcp_next->cpu) ? rtpcp_next->cpu : WORK_CPU_UNBOUND; | |
| queue_work_on(cpuwq, system_percpu_wq, &rtpcp_next->rtp_work); | |
| } | |
| } | |
| } | |
| } | |
| if (rcu_segcblist_empty(&rtpcp->cblist)) | |
| return; | |
| raw_spin_lock_irqsave_rcu_node(rtpcp, flags); | |
| rcu_segcblist_advance(&rtpcp->cblist, rcu_seq_current(&rtp->tasks_gp_seq)); | |
| rcu_segcblist_extract_done_cbs(&rtpcp->cblist, &rcl); | |
| raw_spin_unlock_irqrestore_rcu_node(rtpcp, flags); | |
| len = rcl.len; | |
| for (rhp = rcu_cblist_dequeue(&rcl); rhp; rhp = rcu_cblist_dequeue(&rcl)) { | |
| debug_rcu_head_callback(rhp); | |
| local_bh_disable(); | |
| rhp->func(rhp); | |
| local_bh_enable(); | |
| cond_resched(); | |
| } | |
| raw_spin_lock_irqsave_rcu_node(rtpcp, flags); | |
| rcu_segcblist_add_len(&rtpcp->cblist, -len); | |
| (void)rcu_segcblist_accelerate(&rtpcp->cblist, rcu_seq_snap(&rtp->tasks_gp_seq)); | |
| raw_spin_unlock_irqrestore_rcu_node(rtpcp, flags); | |
| } | |
| // Workqueue flood to advance callbacks and invoke any that are ready. | |
| static void rcu_tasks_invoke_cbs_wq(struct work_struct *wp) | |
| { | |
| struct rcu_tasks *rtp; | |
| struct rcu_tasks_percpu *rtpcp = container_of(wp, struct rcu_tasks_percpu, rtp_work); | |
| rtp = rtpcp->rtpp; | |
| rcu_tasks_invoke_cbs(rtp, rtpcp); | |
| } | |
| // Wait for one grace period. | |
| static void rcu_tasks_one_gp(struct rcu_tasks *rtp, bool midboot) | |
| { | |
| int needgpcb; | |
| mutex_lock(&rtp->tasks_gp_mutex); | |
| // If there were none, wait a bit and start over. | |
| if (unlikely(midboot)) { | |
| needgpcb = 0x2; | |
| } else { | |
| mutex_unlock(&rtp->tasks_gp_mutex); | |
| set_tasks_gp_state(rtp, RTGS_WAIT_CBS); | |
| rcuwait_wait_event(&rtp->cbs_wait, | |
| (needgpcb = rcu_tasks_need_gpcb(rtp)), | |
| TASK_IDLE); | |
| mutex_lock(&rtp->tasks_gp_mutex); | |
| } | |
| if (needgpcb & 0x2) { | |
| // Wait for one grace period. | |
| set_tasks_gp_state(rtp, RTGS_WAIT_GP); | |
| rtp->gp_start = jiffies; | |
| rcu_seq_start(&rtp->tasks_gp_seq); | |
| rtp->gp_func(rtp); | |
| rcu_seq_end(&rtp->tasks_gp_seq); | |
| } | |
| // Invoke callbacks. | |
| set_tasks_gp_state(rtp, RTGS_INVOKE_CBS); | |
| rcu_tasks_invoke_cbs(rtp, per_cpu_ptr(rtp->rtpcpu, 0)); | |
| mutex_unlock(&rtp->tasks_gp_mutex); | |
| } | |
| // RCU-tasks kthread that detects grace periods and invokes callbacks. | |
| static int __noreturn rcu_tasks_kthread(void *arg) | |
| { | |
| int cpu; | |
| struct rcu_tasks *rtp = arg; | |
| for_each_possible_cpu(cpu) { | |
| struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); | |
| timer_setup(&rtpcp->lazy_timer, call_rcu_tasks_generic_timer, 0); | |
| rtpcp->urgent_gp = 1; | |
| } | |
| /* Run on housekeeping CPUs by default. Sysadm can move if desired. */ | |
| housekeeping_affine(current, HK_TYPE_RCU); | |
| smp_store_release(&rtp->kthread_ptr, current); // Let GPs start! | |
| /* | |
| * Each pass through the following loop makes one check for | |
| * newly arrived callbacks, and, if there are some, waits for | |
| * one RCU-tasks grace period and then invokes the callbacks. | |
| * This loop is terminated by the system going down. ;-) | |
| */ | |
| for (;;) { | |
| // Wait for one grace period and invoke any callbacks | |
| // that are ready. | |
| rcu_tasks_one_gp(rtp, false); | |
| // Paranoid sleep to keep this from entering a tight loop. | |
| schedule_timeout_idle(rtp->gp_sleep); | |
| } | |
| } | |
| // Wait for a grace period for the specified flavor of Tasks RCU. | |
| static void synchronize_rcu_tasks_generic(struct rcu_tasks *rtp) | |
| { | |
| /* Complain if the scheduler has not started. */ | |
| if (WARN_ONCE(rcu_scheduler_active == RCU_SCHEDULER_INACTIVE, | |
| "synchronize_%s() called too soon", rtp->name)) | |
| return; | |
| // If the grace-period kthread is running, use it. | |
| if (READ_ONCE(rtp->kthread_ptr)) { | |
| wait_rcu_gp_state(rtp->wait_state, rtp->call_func); | |
| return; | |
| } | |
| rcu_tasks_one_gp(rtp, true); | |
| } | |
| /* Spawn RCU-tasks grace-period kthread. */ | |
| static void __init rcu_spawn_tasks_kthread_generic(struct rcu_tasks *rtp) | |
| { | |
| struct task_struct *t; | |
| t = kthread_run(rcu_tasks_kthread, rtp, "%s_kthread", rtp->kname); | |
| if (WARN_ONCE(IS_ERR(t), "%s: Could not start %s grace-period kthread, OOM is now expected behavior\n", __func__, rtp->name)) | |
| return; | |
| smp_mb(); /* Ensure others see full kthread. */ | |
| } | |
| #ifndef CONFIG_TINY_RCU | |
| /* | |
| * Print any non-default Tasks RCU settings. | |
| */ | |
| static void __init rcu_tasks_bootup_oddness(void) | |
| { | |
| #if defined(CONFIG_TASKS_RCU) || defined(CONFIG_TASKS_TRACE_RCU) | |
| int rtsimc; | |
| if (rcu_task_stall_timeout != RCU_TASK_STALL_TIMEOUT) | |
| pr_info("\tTasks-RCU CPU stall warnings timeout set to %d (rcu_task_stall_timeout).\n", rcu_task_stall_timeout); | |
| rtsimc = clamp(rcu_task_stall_info_mult, 1, 10); | |
| if (rtsimc != rcu_task_stall_info_mult) { | |
| pr_info("\tTasks-RCU CPU stall info multiplier clamped to %d (rcu_task_stall_info_mult).\n", rtsimc); | |
| rcu_task_stall_info_mult = rtsimc; | |
| } | |
| #endif /* #ifdef CONFIG_TASKS_RCU */ | |
| #ifdef CONFIG_TASKS_RCU | |
| pr_info("\tTrampoline variant of Tasks RCU enabled.\n"); | |
| #endif /* #ifdef CONFIG_TASKS_RCU */ | |
| #ifdef CONFIG_TASKS_RUDE_RCU | |
| pr_info("\tRude variant of Tasks RCU enabled.\n"); | |
| #endif /* #ifdef CONFIG_TASKS_RUDE_RCU */ | |
| #ifdef CONFIG_TASKS_TRACE_RCU | |
| pr_info("\tTracing variant of Tasks RCU enabled.\n"); | |
| #endif /* #ifdef CONFIG_TASKS_TRACE_RCU */ | |
| } | |
| /* Dump out rcutorture-relevant state common to all RCU-tasks flavors. */ | |
| static void show_rcu_tasks_generic_gp_kthread(struct rcu_tasks *rtp, char *s) | |
| { | |
| int cpu; | |
| bool havecbs = false; | |
| bool haveurgent = false; | |
| bool haveurgentcbs = false; | |
| for_each_possible_cpu(cpu) { | |
| struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); | |
| if (!data_race(rcu_segcblist_empty(&rtpcp->cblist))) | |
| havecbs = true; | |
| if (data_race(rtpcp->urgent_gp)) | |
| haveurgent = true; | |
| if (!data_race(rcu_segcblist_empty(&rtpcp->cblist)) && data_race(rtpcp->urgent_gp)) | |
| haveurgentcbs = true; | |
| if (havecbs && haveurgent && haveurgentcbs) | |
| break; | |
| } | |
| pr_info("%s: %s(%d) since %lu g:%lu i:%lu/%lu %c%c%c%c l:%lu %s\n", | |
| rtp->kname, | |
| tasks_gp_state_getname(rtp), data_race(rtp->gp_state), | |
| jiffies - data_race(rtp->gp_jiffies), | |
| data_race(rcu_seq_current(&rtp->tasks_gp_seq)), | |
| data_race(rtp->n_ipis_fails), data_race(rtp->n_ipis), | |
| ".k"[!!data_race(rtp->kthread_ptr)], | |
| ".C"[havecbs], | |
| ".u"[haveurgent], | |
| ".U"[haveurgentcbs], | |
| rtp->lazy_jiffies, | |
| s); | |
| } | |
| /* Dump out more rcutorture-relevant state common to all RCU-tasks flavors. */ | |
| static void rcu_tasks_torture_stats_print_generic(struct rcu_tasks *rtp, char *tt, | |
| char *tf, char *tst) | |
| { | |
| cpumask_var_t cm; | |
| int cpu; | |
| bool gotcb = false; | |
| unsigned long j = jiffies; | |
| pr_alert("%s%s Tasks%s RCU g%ld gp_start %lu gp_jiffies %lu gp_state %d (%s).\n", | |
| tt, tf, tst, data_race(rtp->tasks_gp_seq), | |
| j - data_race(rtp->gp_start), j - data_race(rtp->gp_jiffies), | |
| data_race(rtp->gp_state), tasks_gp_state_getname(rtp)); | |
| pr_alert("\tEnqueue shift %d limit %d Dequeue limit %d gpseq %lu.\n", | |
| data_race(rtp->percpu_enqueue_shift), | |
| data_race(rtp->percpu_enqueue_lim), | |
| data_race(rtp->percpu_dequeue_lim), | |
| data_race(rtp->percpu_dequeue_gpseq)); | |
| (void)zalloc_cpumask_var(&cm, GFP_KERNEL); | |
| pr_alert("\tCallback counts:"); | |
| for_each_possible_cpu(cpu) { | |
| long n; | |
| struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rtp->rtpcpu, cpu); | |
| if (cpumask_available(cm) && !rcu_barrier_cb_is_done(&rtpcp->barrier_q_head)) | |
| cpumask_set_cpu(cpu, cm); | |
| n = rcu_segcblist_n_cbs(&rtpcp->cblist); | |
| if (!n) | |
| continue; | |
| pr_cont(" %d:%ld", cpu, n); | |
| gotcb = true; | |
| } | |
| if (gotcb) | |
| pr_cont(".\n"); | |
| else | |
| pr_cont(" (none).\n"); | |
| pr_alert("\tBarrier seq %lu start %lu count %d holdout CPUs ", | |
| data_race(rtp->barrier_q_seq), j - data_race(rtp->barrier_q_start), | |
| atomic_read(&rtp->barrier_q_count)); | |
| if (cpumask_available(cm) && !cpumask_empty(cm)) | |
| pr_cont(" %*pbl.\n", cpumask_pr_args(cm)); | |
| else | |
| pr_cont("(none).\n"); | |
| free_cpumask_var(cm); | |
| } | |
| #endif // #ifndef CONFIG_TINY_RCU | |
| #if defined(CONFIG_TASKS_RCU) | |
| //////////////////////////////////////////////////////////////////////// | |
| // | |
| // Shared code between task-list-scanning variants of Tasks RCU. | |
| /* Wait for one RCU-tasks grace period. */ | |
| static void rcu_tasks_wait_gp(struct rcu_tasks *rtp) | |
| { | |
| struct task_struct *g; | |
| int fract; | |
| LIST_HEAD(holdouts); | |
| unsigned long j; | |
| unsigned long lastinfo; | |
| unsigned long lastreport; | |
| bool reported = false; | |
| int rtsi; | |
| struct task_struct *t; | |
| set_tasks_gp_state(rtp, RTGS_PRE_WAIT_GP); | |
| rtp->pregp_func(&holdouts); | |
| /* | |
| * There were callbacks, so we need to wait for an RCU-tasks | |
| * grace period. Start off by scanning the task list for tasks | |
| * that are not already voluntarily blocked. Mark these tasks | |
| * and make a list of them in holdouts. | |
| */ | |
| set_tasks_gp_state(rtp, RTGS_SCAN_TASKLIST); | |
| if (rtp->pertask_func) { | |
| rcu_read_lock(); | |
| for_each_process_thread(g, t) | |
| rtp->pertask_func(t, &holdouts); | |
| rcu_read_unlock(); | |
| } | |
| set_tasks_gp_state(rtp, RTGS_POST_SCAN_TASKLIST); | |
| rtp->postscan_func(&holdouts); | |
| /* | |
| * Each pass through the following loop scans the list of holdout | |
| * tasks, removing any that are no longer holdouts. When the list | |
| * is empty, we are done. | |
| */ | |
| lastreport = jiffies; | |
| lastinfo = lastreport; | |
| rtsi = READ_ONCE(rcu_task_stall_info); | |
| // Start off with initial wait and slowly back off to 1 HZ wait. | |
| fract = rtp->init_fract; | |
| while (!list_empty(&holdouts)) { | |
| ktime_t exp; | |
| bool firstreport; | |
| bool needreport; | |
| int rtst; | |
| // Slowly back off waiting for holdouts | |
| set_tasks_gp_state(rtp, RTGS_WAIT_SCAN_HOLDOUTS); | |
| if (!IS_ENABLED(CONFIG_PREEMPT_RT)) { | |
| schedule_timeout_idle(fract); | |
| } else { | |
| exp = jiffies_to_nsecs(fract); | |
| __set_current_state(TASK_IDLE); | |
| schedule_hrtimeout_range(&exp, jiffies_to_nsecs(HZ / 2), HRTIMER_MODE_REL_HARD); | |
| } | |
| if (fract < HZ) | |
| fract++; | |
| rtst = READ_ONCE(rcu_task_stall_timeout); | |
| needreport = rtst > 0 && time_after(jiffies, lastreport + rtst); | |
| if (needreport) { | |
| lastreport = jiffies; | |
| reported = true; | |
| } | |
| firstreport = true; | |
| WARN_ON(signal_pending(current)); | |
| set_tasks_gp_state(rtp, RTGS_SCAN_HOLDOUTS); | |
| rtp->holdouts_func(&holdouts, needreport, &firstreport); | |
| // Print pre-stall informational messages if needed. | |
| j = jiffies; | |
| if (rtsi > 0 && !reported && time_after(j, lastinfo + rtsi)) { | |
| lastinfo = j; | |
| rtsi = rtsi * rcu_task_stall_info_mult; | |
| pr_info("%s: %s grace period number %lu (since boot) is %lu jiffies old.\n", | |
| __func__, rtp->kname, rtp->tasks_gp_seq, j - rtp->gp_start); | |
| } | |
| } | |
| set_tasks_gp_state(rtp, RTGS_POST_GP); | |
| rtp->postgp_func(rtp); | |
| } | |
| #endif /* #if defined(CONFIG_TASKS_RCU) */ | |
| #ifdef CONFIG_TASKS_RCU | |
| //////////////////////////////////////////////////////////////////////// | |
| // | |
| // Simple variant of RCU whose quiescent states are voluntary context | |
| // switch, cond_resched_tasks_rcu_qs(), user-space execution, and idle. | |
| // As such, grace periods can take one good long time. There are no | |
| // read-side primitives similar to rcu_read_lock() and rcu_read_unlock() | |
| // because this implementation is intended to get the system into a safe | |
| // state for some of the manipulations involved in tracing and the like. | |
| // Finally, this implementation does not support high call_rcu_tasks() | |
| // rates from multiple CPUs. If this is required, per-CPU callback lists | |
| // will be needed. | |
| // | |
| // The implementation uses rcu_tasks_wait_gp(), which relies on function | |
| // pointers in the rcu_tasks structure. The rcu_spawn_tasks_kthread() | |
| // function sets these function pointers up so that rcu_tasks_wait_gp() | |
| // invokes these functions in this order: | |
| // | |
| // rcu_tasks_pregp_step(): | |
| // Invokes synchronize_rcu() in order to wait for all in-flight | |
| // t->on_rq and t->nvcsw transitions to complete. This works because | |
| // all such transitions are carried out with interrupts disabled. | |
| // rcu_tasks_pertask(), invoked on every non-idle task: | |
| // For every runnable non-idle task other than the current one, use | |
| // get_task_struct() to pin down that task, snapshot that task's | |
| // number of voluntary context switches, and add that task to the | |
| // holdout list. | |
| // rcu_tasks_postscan(): | |
| // Gather per-CPU lists of tasks in do_exit() to ensure that all | |
| // tasks that were in the process of exiting (and which thus might | |
| // not know to synchronize with this RCU Tasks grace period) have | |
| // completed exiting. The synchronize_rcu() in rcu_tasks_postgp() | |
| // will take care of any tasks stuck in the non-preemptible region | |
| // of do_exit() following its call to exit_tasks_rcu_finish(). | |
| // check_all_holdout_tasks(), repeatedly until holdout list is empty: | |
| // Scans the holdout list, attempting to identify a quiescent state | |
| // for each task on the list. If there is a quiescent state, the | |
| // corresponding task is removed from the holdout list. | |
| // rcu_tasks_postgp(): | |
| // Invokes synchronize_rcu() in order to ensure that all prior | |
| // t->on_rq and t->nvcsw transitions are seen by all CPUs and tasks | |
| // to have happened before the end of this RCU Tasks grace period. | |
| // Again, this works because all such transitions are carried out | |
| // with interrupts disabled. | |
| // | |
| // For each exiting task, the exit_tasks_rcu_start() and | |
| // exit_tasks_rcu_finish() functions add and remove, respectively, the | |
| // current task to a per-CPU list of tasks that rcu_tasks_postscan() must | |
| // wait on. This is necessary because rcu_tasks_postscan() must wait on | |
| // tasks that have already been removed from the global list of tasks. | |
| // | |
| // Pre-grace-period update-side code is ordered before the grace | |
| // via the raw_spin_lock.*rcu_node(). Pre-grace-period read-side code | |
| // is ordered before the grace period via synchronize_rcu() call in | |
| // rcu_tasks_pregp_step() and by the scheduler's locks and interrupt | |
| // disabling. | |
| /* Pre-grace-period preparation. */ | |
| static void rcu_tasks_pregp_step(struct list_head *hop) | |
| { | |
| /* | |
| * Wait for all pre-existing t->on_rq and t->nvcsw transitions | |
| * to complete. Invoking synchronize_rcu() suffices because all | |
| * these transitions occur with interrupts disabled. Without this | |
| * synchronize_rcu(), a read-side critical section that started | |
| * before the grace period might be incorrectly seen as having | |
| * started after the grace period. | |
| * | |
| * This synchronize_rcu() also dispenses with the need for a | |
| * memory barrier on the first store to t->rcu_tasks_holdout, | |
| * as it forces the store to happen after the beginning of the | |
| * grace period. | |
| */ | |
| synchronize_rcu(); | |
| } | |
| /* Check for quiescent states since the pregp's synchronize_rcu() */ | |
| static bool rcu_tasks_is_holdout(struct task_struct *t) | |
| { | |
| int cpu; | |
| /* Has the task been seen voluntarily sleeping? */ | |
| if (!READ_ONCE(t->on_rq)) | |
| return false; | |
| /* | |
| * t->on_rq && !t->se.sched_delayed *could* be considered sleeping but | |
| * since it is a spurious state (it will transition into the | |
| * traditional blocked state or get woken up without outside | |
| * dependencies), not considering it such should only affect timing. | |
| * | |
| * Be conservative for now and not include it. | |
| */ | |
| /* | |
| * Idle tasks (or idle injection) within the idle loop are RCU-tasks | |
| * quiescent states. But CPU boot code performed by the idle task | |
| * isn't a quiescent state. | |
| */ | |
| if (is_idle_task(t)) | |
| return false; | |
| cpu = task_cpu(t); | |
| /* Idle tasks on offline CPUs are RCU-tasks quiescent states. */ | |
| if (t == idle_task(cpu) && !rcu_cpu_online(cpu)) | |
| return false; | |
| return true; | |
| } | |
| /* Per-task initial processing. */ | |
| static void rcu_tasks_pertask(struct task_struct *t, struct list_head *hop) | |
| { | |
| if (t != current && rcu_tasks_is_holdout(t)) { | |
| get_task_struct(t); | |
| t->rcu_tasks_nvcsw = READ_ONCE(t->nvcsw); | |
| WRITE_ONCE(t->rcu_tasks_holdout, true); | |
| list_add(&t->rcu_tasks_holdout_list, hop); | |
| } | |
| } | |
| void call_rcu_tasks(struct rcu_head *rhp, rcu_callback_t func); | |
| DEFINE_RCU_TASKS(rcu_tasks, rcu_tasks_wait_gp, call_rcu_tasks, "RCU Tasks"); | |
| /* Processing between scanning taskslist and draining the holdout list. */ | |
| static void rcu_tasks_postscan(struct list_head *hop) | |
| { | |
| int cpu; | |
| int rtsi = READ_ONCE(rcu_task_stall_info); | |
| if (!IS_ENABLED(CONFIG_TINY_RCU)) { | |
| tasks_rcu_exit_srcu_stall_timer.expires = jiffies + rtsi; | |
| add_timer(&tasks_rcu_exit_srcu_stall_timer); | |
| } | |
| /* | |
| * Exiting tasks may escape the tasklist scan. Those are vulnerable | |
| * until their final schedule() with TASK_DEAD state. To cope with | |
| * this, divide the fragile exit path part in two intersecting | |
| * read side critical sections: | |
| * | |
| * 1) A task_struct list addition before calling exit_notify(), | |
| * which may remove the task from the tasklist, with the | |
| * removal after the final preempt_disable() call in do_exit(). | |
| * | |
| * 2) An _RCU_ read side starting with the final preempt_disable() | |
| * call in do_exit() and ending with the final call to schedule() | |
| * with TASK_DEAD state. | |
| * | |
| * This handles the part 1). And postgp will handle part 2) with a | |
| * call to synchronize_rcu(). | |
| */ | |
| for_each_possible_cpu(cpu) { | |
| unsigned long j = jiffies + 1; | |
| struct rcu_tasks_percpu *rtpcp = per_cpu_ptr(rcu_tasks.rtpcpu, cpu); | |
| struct task_struct *t; | |
| struct task_struct *t1; | |
| struct list_head tmp; | |
| raw_spin_lock_irq_rcu_node(rtpcp); | |
| list_for_each_entry_safe(t, t1, &rtpcp->rtp_exit_list, rcu_tasks_exit_list) { | |
| if (list_empty(&t->rcu_tasks_holdout_list)) | |
| rcu_tasks_pertask(t, hop); | |
| // RT kernels need frequent pauses, otherwise | |
| // pause at least once per pair of jiffies. | |
| if (!IS_ENABLED(CONFIG_PREEMPT_RT) && time_before(jiffies, j)) | |
| continue; | |
| // Keep our place in the list while pausing. | |
| // Nothing else traverses this list, so adding a | |
| // bare list_head is OK. | |
| list_add(&tmp, &t->rcu_tasks_exit_list); | |
| raw_spin_unlock_irq_rcu_node(rtpcp); | |
| cond_resched(); // For CONFIG_PREEMPT=n kernels | |
| raw_spin_lock_irq_rcu_node(rtpcp); | |
| t1 = list_entry(tmp.next, struct task_struct, rcu_tasks_exit_list); | |
| list_del(&tmp); | |
| j = jiffies + 1; | |
| } | |
| raw_spin_unlock_irq_rcu_node(rtpcp); | |
| } | |
| if (!IS_ENABLED(CONFIG_TINY_RCU)) | |
| timer_delete_sync(&tasks_rcu_exit_srcu_stall_timer); | |
| } | |
| /* See if tasks are still holding out, complain if so. */ | |
| static void check_holdout_task(struct task_struct *t, | |
| bool needreport, bool *firstreport) | |
| { | |
| int cpu; | |
| if (!READ_ONCE(t->rcu_tasks_holdout) || | |
| t->rcu_tasks_nvcsw != READ_ONCE(t->nvcsw) || | |
| !rcu_tasks_is_holdout(t) || | |
| (IS_ENABLED(CONFIG_NO_HZ_FULL) && | |
| !is_idle_task(t) && READ_ONCE(t->rcu_tasks_idle_cpu) >= 0)) { | |
| WRITE_ONCE(t->rcu_tasks_holdout, false); | |
| list_del_init(&t->rcu_tasks_holdout_list); | |
| put_task_struct(t); | |
| return; | |
| } | |
| rcu_request_urgent_qs_task(t); | |
| if (!needreport) | |
| return; | |
| if (*firstreport) { | |
| pr_err("INFO: rcu_tasks detected stalls on tasks:\n"); | |
| *firstreport = false; | |
| } | |
| cpu = task_cpu(t); | |
| pr_alert("%p: %c%c nvcsw: %lu/%lu holdout: %d idle_cpu: %d/%d\n", | |
| t, ".I"[is_idle_task(t)], | |
| "N."[cpu < 0 || !tick_nohz_full_cpu(cpu)], | |
| t->rcu_tasks_nvcsw, t->nvcsw, t->rcu_tasks_holdout, | |
| data_race(t->rcu_tasks_idle_cpu), cpu); | |
| sched_show_task(t); | |
| } | |
| /* Scan the holdout lists for tasks no longer holding out. */ | |
| static void check_all_holdout_tasks(struct list_head *hop, | |
| bool needreport, bool *firstreport) | |
| { | |
| struct task_struct *t, *t1; | |
| list_for_each_entry_safe(t, t1, hop, rcu_tasks_holdout_list) { | |
| check_holdout_task(t, needreport, firstreport); | |
| cond_resched(); | |
| } | |
| } | |
| /* Finish off the Tasks-RCU grace period. */ | |
| static void rcu_tasks_postgp(struct rcu_tasks *rtp) | |
| { | |
| /* | |
| * Because ->on_rq and ->nvcsw are not guaranteed to have a full | |
| * memory barriers prior to them in the schedule() path, memory | |
| * reordering on other CPUs could cause their RCU-tasks read-side | |
| * critical sections to extend past the end of the grace period. | |
| * However, because these ->nvcsw updates are carried out with | |
| * interrupts disabled, we can use synchronize_rcu() to force the | |
| * needed ordering on all such CPUs. | |
| * | |
| * This synchronize_rcu() also confines all ->rcu_tasks_holdout | |
| * accesses to be within the grace period, avoiding the need for | |
| * memory barriers for ->rcu_tasks_holdout accesses. | |
| * | |
| * In addition, this synchronize_rcu() waits for exiting tasks | |
| * to complete their final preempt_disable() region of execution, | |
| * enforcing the whole region before tasklist removal until | |
| * the final schedule() with TASK_DEAD state to be an RCU TASKS | |
| * read side critical section. | |
| */ | |
| synchronize_rcu(); | |
| } | |
| static void tasks_rcu_exit_srcu_stall(struct timer_list *unused) | |
| { | |
| #ifndef CONFIG_TINY_RCU | |
| int rtsi; | |
| rtsi = READ_ONCE(rcu_task_stall_info); | |
| pr_info("%s: %s grace period number %lu (since boot) gp_state: %s is %lu jiffies old.\n", | |
| __func__, rcu_tasks.kname, rcu_tasks.tasks_gp_seq, | |
| tasks_gp_state_getname(&rcu_tasks), jiffies - rcu_tasks.gp_jiffies); | |
| pr_info("Please check any exiting tasks stuck between calls to exit_tasks_rcu_start() and exit_tasks_rcu_finish()\n"); | |
| tasks_rcu_exit_srcu_stall_timer.expires = jiffies + rtsi; | |
| add_timer(&tasks_rcu_exit_srcu_stall_timer); | |
| #endif // #ifndef CONFIG_TINY_RCU | |
| } | |
| /** | |
| * call_rcu_tasks() - Queue an RCU for invocation task-based grace period | |
| * @rhp: structure to be used for queueing the RCU updates. | |
| * @func: actual callback function to be invoked after the grace period | |
| * | |
| * The callback function will be invoked some time after a full grace | |
| * period elapses, in other words after all currently executing RCU | |
| * read-side critical sections have completed. call_rcu_tasks() assumes | |
| * that the read-side critical sections end at a voluntary context | |
| * switch (not a preemption!), cond_resched_tasks_rcu_qs(), entry into idle, | |
| * or transition to usermode execution. As such, there are no read-side | |
| * primitives analogous to rcu_read_lock() and rcu_read_unlock() because | |
| * this primitive is intended to determine that all tasks have passed | |
| * through a safe state, not so much for data-structure synchronization. | |
| * | |
| * See the description of call_rcu() for more detailed information on | |
| * memory ordering guarantees. | |
| */ | |
| void call_rcu_tasks(struct rcu_head *rhp, rcu_callback_t func) | |
| { | |
| call_rcu_tasks_generic(rhp, func, &rcu_tasks); | |
| } | |
| EXPORT_SYMBOL_GPL(call_rcu_tasks); | |
| /** | |
| * synchronize_rcu_tasks - wait until an rcu-tasks grace period has elapsed. | |
| * | |
| * Control will return to the caller some time after a full rcu-tasks | |
| * grace period has elapsed, in other words after all currently | |
| * executing rcu-tasks read-side critical sections have elapsed. These | |
| * read-side critical sections are delimited by calls to schedule(), | |
| * cond_resched_tasks_rcu_qs(), idle execution, userspace execution, calls | |
| * to synchronize_rcu_tasks(), and (in theory, anyway) cond_resched(). | |
| * | |
| * This is a very specialized primitive, intended only for a few uses in | |
| * tracing and other situations requiring manipulation of function | |
| * preambles and profiling hooks. The synchronize_rcu_tasks() function | |
| * is not (yet) intended for heavy use from multiple CPUs. | |
| * | |
| * See the description of synchronize_rcu() for more detailed information | |
| * on memory ordering guarantees. | |
| */ | |
| void synchronize_rcu_tasks(void) | |
| { | |
| synchronize_rcu_tasks_generic(&rcu_tasks); | |
| } | |
| EXPORT_SYMBOL_GPL(synchronize_rcu_tasks); | |
| /** | |
| * rcu_barrier_tasks - Wait for in-flight call_rcu_tasks() callbacks. | |
| * | |
| * Although the current implementation is guaranteed to wait, it is not | |
| * obligated to, for example, if there are no pending callbacks. | |
| */ | |
| void rcu_barrier_tasks(void) | |
| { | |
| rcu_barrier_tasks_generic(&rcu_tasks); | |
| } | |
| EXPORT_SYMBOL_GPL(rcu_barrier_tasks); | |
| static int rcu_tasks_lazy_ms = -1; | |
| module_param(rcu_tasks_lazy_ms, int, 0444); | |
| static int __init rcu_spawn_tasks_kthread(void) | |
| { | |
| rcu_tasks.gp_sleep = HZ / 10; | |
| rcu_tasks.init_fract = HZ / 10; | |
| if (rcu_tasks_lazy_ms >= 0) | |
| rcu_tasks.lazy_jiffies = msecs_to_jiffies(rcu_tasks_lazy_ms); | |
| rcu_tasks.pregp_func = rcu_tasks_pregp_step; | |
| rcu_tasks.pertask_func = rcu_tasks_pertask; | |
| rcu_tasks.postscan_func = rcu_tasks_postscan; | |
| rcu_tasks.holdouts_func = check_all_holdout_tasks; | |
| rcu_tasks.postgp_func = rcu_tasks_postgp; | |
| rcu_tasks.wait_state = TASK_IDLE; | |
| rcu_spawn_tasks_kthread_generic(&rcu_tasks); | |
| return 0; | |
| } | |
| #if !defined(CONFIG_TINY_RCU) | |
| void show_rcu_tasks_classic_gp_kthread(void) | |
| { | |
| show_rcu_tasks_generic_gp_kthread(&rcu_tasks, ""); | |
| } | |
| EXPORT_SYMBOL_GPL(show_rcu_tasks_classic_gp_kthread); | |
| void rcu_tasks_torture_stats_print(char *tt, char *tf) | |
| { | |
| rcu_tasks_torture_stats_print_generic(&rcu_tasks, tt, tf, ""); | |
| } | |
| EXPORT_SYMBOL_GPL(rcu_tasks_torture_stats_print); | |
| #endif // !defined(CONFIG_TINY_RCU) | |
| struct task_struct *get_rcu_tasks_gp_kthread(void) | |
| { | |
| return rcu_tasks.kthread_ptr; | |
| } | |
| EXPORT_SYMBOL_GPL(get_rcu_tasks_gp_kthread); | |
| void rcu_tasks_get_gp_data(int *flags, unsigned long *gp_seq) | |
| { | |
| *flags = 0; | |
| *gp_seq = rcu_seq_current(&rcu_tasks.tasks_gp_seq); | |
| } | |
| EXPORT_SYMBOL_GPL(rcu_tasks_get_gp_data); | |
| /* | |
| * Protect against tasklist scan blind spot while the task is exiting and | |
| * may be removed from the tasklist. Do this by adding the task to yet | |
| * another list. | |
| * | |
| * Note that the task will remove itself from this list, so there is no | |
| * need for get_task_struct(), except in the case where rcu_tasks_pertask() | |
| * adds it to the holdout list, in which case rcu_tasks_pertask() supplies | |
| * the needed get_task_struct(). | |
| */ | |
| void exit_tasks_rcu_start(void) | |
| { | |
| unsigned long flags; | |
| struct rcu_tasks_percpu *rtpcp; | |
| struct task_struct *t = current; | |
| WARN_ON_ONCE(!list_empty(&t->rcu_tasks_exit_list)); | |
| preempt_disable(); | |
| rtpcp = this_cpu_ptr(rcu_tasks.rtpcpu); | |
| t->rcu_tasks_exit_cpu = smp_processor_id(); | |
| raw_spin_lock_irqsave_rcu_node(rtpcp, flags); | |
| WARN_ON_ONCE(!rtpcp->rtp_exit_list.next); | |
| list_add(&t->rcu_tasks_exit_list, &rtpcp->rtp_exit_list); | |
| raw_spin_unlock_irqrestore_rcu_node(rtpcp, flags); | |
| preempt_enable(); | |
| } | |
| /* | |
| * Remove the task from the "yet another list" because do_exit() is now | |
| * non-preemptible, allowing synchronize_rcu() to wait beyond this point. | |
| */ | |
| void exit_tasks_rcu_finish(void) | |
| { | |
| unsigned long flags; | |
| struct rcu_tasks_percpu *rtpcp; | |
| struct task_struct *t = current; | |
| WARN_ON_ONCE(list_empty(&t->rcu_tasks_exit_list)); | |
| rtpcp = per_cpu_ptr(rcu_tasks.rtpcpu, t->rcu_tasks_exit_cpu); | |
| raw_spin_lock_irqsave_rcu_node(rtpcp, flags); | |
| list_del_init(&t->rcu_tasks_exit_list); | |
| raw_spin_unlock_irqrestore_rcu_node(rtpcp, flags); | |
| } | |
| #else /* #ifdef CONFIG_TASKS_RCU */ | |
| void exit_tasks_rcu_start(void) { } | |
| void exit_tasks_rcu_finish(void) { } | |
| #endif /* #else #ifdef CONFIG_TASKS_RCU */ | |
| #ifdef CONFIG_TASKS_RUDE_RCU | |
| //////////////////////////////////////////////////////////////////////// | |
| // | |
| // "Rude" variant of Tasks RCU, inspired by Steve Rostedt's | |
| // trick of passing an empty function to schedule_on_each_cpu(). | |
| // This approach provides batching of concurrent calls to the synchronous | |
| // synchronize_rcu_tasks_rude() API. This invokes schedule_on_each_cpu() | |
| // in order to send IPIs far and wide and induces otherwise unnecessary | |
| // context switches on all online CPUs, whether idle or not. | |
| // | |
| // Callback handling is provided by the rcu_tasks_kthread() function. | |
| // | |
| // Ordering is provided by the scheduler's context-switch code. | |
| // Empty function to allow workqueues to force a context switch. | |
| static void rcu_tasks_be_rude(struct work_struct *work) | |
| { | |
| } | |
| // Wait for one rude RCU-tasks grace period. | |
| static void rcu_tasks_rude_wait_gp(struct rcu_tasks *rtp) | |
| { | |
| rtp->n_ipis += cpumask_weight(cpu_online_mask); | |
| schedule_on_each_cpu(rcu_tasks_be_rude); | |
| } | |
| static void call_rcu_tasks_rude(struct rcu_head *rhp, rcu_callback_t func); | |
| DEFINE_RCU_TASKS(rcu_tasks_rude, rcu_tasks_rude_wait_gp, call_rcu_tasks_rude, | |
| "RCU Tasks Rude"); | |
| /* | |
| * call_rcu_tasks_rude() - Queue a callback rude task-based grace period | |
| * @rhp: structure to be used for queueing the RCU updates. | |
| * @func: actual callback function to be invoked after the grace period | |
| * | |
| * The callback function will be invoked some time after a full grace | |
| * period elapses, in other words after all currently executing RCU | |
| * read-side critical sections have completed. call_rcu_tasks_rude() | |
| * assumes that the read-side critical sections end at context switch, | |
| * cond_resched_tasks_rcu_qs(), or transition to usermode execution (as | |
| * usermode execution is schedulable). As such, there are no read-side | |
| * primitives analogous to rcu_read_lock() and rcu_read_unlock() because | |
| * this primitive is intended to determine that all tasks have passed | |
| * through a safe state, not so much for data-structure synchronization. | |
| * | |
| * See the description of call_rcu() for more detailed information on | |
| * memory ordering guarantees. | |
| * | |
| * This is no longer exported, and is instead reserved for use by | |
| * synchronize_rcu_tasks_rude(). | |
| */ | |
| static void call_rcu_tasks_rude(struct rcu_head *rhp, rcu_callback_t func) | |
| { | |
| call_rcu_tasks_generic(rhp, func, &rcu_tasks_rude); | |
| } | |
| /** | |
| * synchronize_rcu_tasks_rude - wait for a rude rcu-tasks grace period | |
| * | |
| * Control will return to the caller some time after a rude rcu-tasks | |
| * grace period has elapsed, in other words after all currently | |
| * executing rcu-tasks read-side critical sections have elapsed. These | |
| * read-side critical sections are delimited by calls to schedule(), | |
| * cond_resched_tasks_rcu_qs(), userspace execution (which is a schedulable | |
| * context), and (in theory, anyway) cond_resched(). | |
| * | |
| * This is a very specialized primitive, intended only for a few uses in | |
| * tracing and other situations requiring manipulation of function preambles | |
| * and profiling hooks. The synchronize_rcu_tasks_rude() function is not | |
| * (yet) intended for heavy use from multiple CPUs. | |
| * | |
| * See the description of synchronize_rcu() for more detailed information | |
| * on memory ordering guarantees. | |
| */ | |
| void synchronize_rcu_tasks_rude(void) | |
| { | |
| if (!IS_ENABLED(CONFIG_ARCH_WANTS_NO_INSTR) || IS_ENABLED(CONFIG_FORCE_TASKS_RUDE_RCU)) | |
| synchronize_rcu_tasks_generic(&rcu_tasks_rude); | |
| } | |
| EXPORT_SYMBOL_GPL(synchronize_rcu_tasks_rude); | |
| static int __init rcu_spawn_tasks_rude_kthread(void) | |
| { | |
| rcu_tasks_rude.gp_sleep = HZ / 10; | |
| rcu_spawn_tasks_kthread_generic(&rcu_tasks_rude); | |
| return 0; | |
| } | |
| #if !defined(CONFIG_TINY_RCU) | |
| void show_rcu_tasks_rude_gp_kthread(void) | |
| { | |
| show_rcu_tasks_generic_gp_kthread(&rcu_tasks_rude, ""); | |
| } | |
| EXPORT_SYMBOL_GPL(show_rcu_tasks_rude_gp_kthread); | |
| void rcu_tasks_rude_torture_stats_print(char *tt, char *tf) | |
| { | |
| rcu_tasks_torture_stats_print_generic(&rcu_tasks_rude, tt, tf, ""); | |
| } | |
| EXPORT_SYMBOL_GPL(rcu_tasks_rude_torture_stats_print); | |
| #endif // !defined(CONFIG_TINY_RCU) | |
| struct task_struct *get_rcu_tasks_rude_gp_kthread(void) | |
| { | |
| return rcu_tasks_rude.kthread_ptr; | |
| } | |
| EXPORT_SYMBOL_GPL(get_rcu_tasks_rude_gp_kthread); | |
| void rcu_tasks_rude_get_gp_data(int *flags, unsigned long *gp_seq) | |
| { | |
| *flags = 0; | |
| *gp_seq = rcu_seq_current(&rcu_tasks_rude.tasks_gp_seq); | |
| } | |
| EXPORT_SYMBOL_GPL(rcu_tasks_rude_get_gp_data); | |
| #endif /* #ifdef CONFIG_TASKS_RUDE_RCU */ | |
| #ifndef CONFIG_TINY_RCU | |
| void show_rcu_tasks_gp_kthreads(void) | |
| { | |
| show_rcu_tasks_classic_gp_kthread(); | |
| show_rcu_tasks_rude_gp_kthread(); | |
| } | |
| #endif /* #ifndef CONFIG_TINY_RCU */ | |
| #ifdef CONFIG_PROVE_RCU | |
| struct rcu_tasks_test_desc { | |
| struct rcu_head rh; | |
| const char *name; | |
| bool notrun; | |
| unsigned long runstart; | |
| }; | |
| static struct rcu_tasks_test_desc tests[] = { | |
| { | |
| .name = "call_rcu_tasks()", | |
| /* If not defined, the test is skipped. */ | |
| .notrun = IS_ENABLED(CONFIG_TASKS_RCU), | |
| }, | |
| { | |
| .name = "call_rcu_tasks_trace()", | |
| /* If not defined, the test is skipped. */ | |
| .notrun = IS_ENABLED(CONFIG_TASKS_TRACE_RCU) | |
| } | |
| }; | |
| #if defined(CONFIG_TASKS_RCU) || defined(CONFIG_TASKS_TRACE_RCU) | |
| static void test_rcu_tasks_callback(struct rcu_head *rhp) | |
| { | |
| struct rcu_tasks_test_desc *rttd = | |
| container_of(rhp, struct rcu_tasks_test_desc, rh); | |
| pr_info("Callback from %s invoked.\n", rttd->name); | |
| rttd->notrun = false; | |
| } | |
| #endif // #if defined(CONFIG_TASKS_RCU) || defined(CONFIG_TASKS_TRACE_RCU) | |
| static void rcu_tasks_initiate_self_tests(void) | |
| { | |
| #ifdef CONFIG_TASKS_RCU | |
| pr_info("Running RCU Tasks wait API self tests\n"); | |
| tests[0].runstart = jiffies; | |
| synchronize_rcu_tasks(); | |
| call_rcu_tasks(&tests[0].rh, test_rcu_tasks_callback); | |
| #endif | |
| #ifdef CONFIG_TASKS_RUDE_RCU | |
| pr_info("Running RCU Tasks Rude wait API self tests\n"); | |
| synchronize_rcu_tasks_rude(); | |
| #endif | |
| #ifdef CONFIG_TASKS_TRACE_RCU | |
| pr_info("Running RCU Tasks Trace wait API self tests\n"); | |
| tests[1].runstart = jiffies; | |
| synchronize_rcu_tasks_trace(); | |
| call_rcu_tasks_trace(&tests[1].rh, test_rcu_tasks_callback); | |
| #endif | |
| } | |
| /* | |
| * Return: 0 - test passed | |
| * 1 - test failed, but have not timed out yet | |
| * -1 - test failed and timed out | |
| */ | |
| static int rcu_tasks_verify_self_tests(void) | |
| { | |
| int ret = 0; | |
| int i; | |
| unsigned long bst = rcu_task_stall_timeout; | |
| if (bst <= 0 || bst > RCU_TASK_BOOT_STALL_TIMEOUT) | |
| bst = RCU_TASK_BOOT_STALL_TIMEOUT; | |
| for (i = 0; i < ARRAY_SIZE(tests); i++) { | |
| while (tests[i].notrun) { // still hanging. | |
| if (time_after(jiffies, tests[i].runstart + bst)) { | |
| pr_err("%s has failed boot-time tests.\n", tests[i].name); | |
| ret = -1; | |
| break; | |
| } | |
| ret = 1; | |
| break; | |
| } | |
| } | |
| WARN_ON(ret < 0); | |
| return ret; | |
| } | |
| /* | |
| * Repeat the rcu_tasks_verify_self_tests() call once every second until the | |
| * test passes or has timed out. | |
| */ | |
| static struct delayed_work rcu_tasks_verify_work; | |
| static void rcu_tasks_verify_work_fn(struct work_struct *work __maybe_unused) | |
| { | |
| int ret = rcu_tasks_verify_self_tests(); | |
| if (ret <= 0) | |
| return; | |
| /* Test fails but not timed out yet, reschedule another check */ | |
| schedule_delayed_work(&rcu_tasks_verify_work, HZ); | |
| } | |
| static int rcu_tasks_verify_schedule_work(void) | |
| { | |
| INIT_DELAYED_WORK(&rcu_tasks_verify_work, rcu_tasks_verify_work_fn); | |
| rcu_tasks_verify_work_fn(NULL); | |
| return 0; | |
| } | |
| late_initcall(rcu_tasks_verify_schedule_work); | |
| #else /* #ifdef CONFIG_PROVE_RCU */ | |
| static void rcu_tasks_initiate_self_tests(void) { } | |
| #endif /* #else #ifdef CONFIG_PROVE_RCU */ | |
| void __init tasks_cblist_init_generic(void) | |
| { | |
| lockdep_assert_irqs_disabled(); | |
| WARN_ON(num_online_cpus() > 1); | |
| #ifdef CONFIG_TASKS_RCU | |
| cblist_init_generic(&rcu_tasks); | |
| #endif | |
| #ifdef CONFIG_TASKS_RUDE_RCU | |
| cblist_init_generic(&rcu_tasks_rude); | |
| #endif | |
| } | |
| static int __init rcu_init_tasks_generic(void) | |
| { | |
| #ifdef CONFIG_TASKS_RCU | |
| rcu_spawn_tasks_kthread(); | |
| #endif | |
| #ifdef CONFIG_TASKS_RUDE_RCU | |
| rcu_spawn_tasks_rude_kthread(); | |
| #endif | |
| // Run the self-tests. | |
| rcu_tasks_initiate_self_tests(); | |
| return 0; | |
| } | |
| core_initcall(rcu_init_tasks_generic); | |
| #else /* #ifdef CONFIG_TASKS_RCU_GENERIC */ | |
| static inline void rcu_tasks_bootup_oddness(void) {} | |
| #endif /* #else #ifdef CONFIG_TASKS_RCU_GENERIC */ | |
| #ifdef CONFIG_TASKS_TRACE_RCU | |
| //////////////////////////////////////////////////////////////////////// | |
| // | |
| // Tracing variant of Tasks RCU. This variant is designed to be used | |
| // to protect tracing hooks, including those of BPF. This variant | |
| // is implemented via a straightforward mapping onto SRCU-fast. | |
| DEFINE_SRCU_FAST(rcu_tasks_trace_srcu_struct); | |
| EXPORT_SYMBOL_GPL(rcu_tasks_trace_srcu_struct); | |
| #endif /* #else #ifdef CONFIG_TASKS_TRACE_RCU */ |