| // SPDX-License-Identifier: GPL-2.0 | |
| /* | |
| * SHA-1 and HMAC-SHA1 library functions | |
| */ | |
| #include <crypto/hmac.h> | |
| #include <crypto/sha1.h> | |
| #include <linux/bitops.h> | |
| #include <linux/export.h> | |
| #include <linux/kernel.h> | |
| #include <linux/module.h> | |
| #include <linux/string.h> | |
| #include <linux/unaligned.h> | |
| #include <linux/wordpart.h> | |
| #include "fips.h" | |
| static const struct sha1_block_state sha1_iv = { | |
| .h = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 }, | |
| }; | |
| /* | |
| * If you have 32 registers or more, the compiler can (and should) | |
| * try to change the array[] accesses into registers. However, on | |
| * machines with less than ~25 registers, that won't really work, | |
| * and at least gcc will make an unholy mess of it. | |
| * | |
| * So to avoid that mess which just slows things down, we force | |
| * the stores to memory to actually happen (we might be better off | |
| * with a 'W(t)=(val);asm("":"+m" (W(t))' there instead, as | |
| * suggested by Artur Skawina - that will also make gcc unable to | |
| * try to do the silly "optimize away loads" part because it won't | |
| * see what the value will be). | |
| * | |
| * Ben Herrenschmidt reports that on PPC, the C version comes close | |
| * to the optimized asm with this (ie on PPC you don't want that | |
| * 'volatile', since there are lots of registers). | |
| * | |
| * On ARM we get the best code generation by forcing a full memory barrier | |
| * between each SHA_ROUND, otherwise gcc happily get wild with spilling and | |
| * the stack frame size simply explode and performance goes down the drain. | |
| */ | |
| #ifdef CONFIG_X86 | |
| #define setW(x, val) (*(volatile __u32 *)&W(x) = (val)) | |
| #elif defined(CONFIG_ARM) | |
| #define setW(x, val) do { W(x) = (val); __asm__("":::"memory"); } while (0) | |
| #else | |
| #define setW(x, val) (W(x) = (val)) | |
| #endif | |
| /* This "rolls" over the 512-bit array */ | |
| #define W(x) (workspace[(x)&15]) | |
| /* | |
| * Where do we get the source from? The first 16 iterations get it from | |
| * the input data, the next mix it from the 512-bit array. | |
| */ | |
| #define SHA_SRC(t) get_unaligned_be32((__u32 *)data + t) | |
| #define SHA_MIX(t) rol32(W(t+13) ^ W(t+8) ^ W(t+2) ^ W(t), 1) | |
| #define SHA_ROUND(t, input, fn, constant, A, B, C, D, E) do { \ | |
| __u32 TEMP = input(t); setW(t, TEMP); \ | |
| E += TEMP + rol32(A,5) + (fn) + (constant); \ | |
| B = ror32(B, 2); \ | |
| TEMP = E; E = D; D = C; C = B; B = A; A = TEMP; } while (0) | |
| #define T_0_15(t, A, B, C, D, E) SHA_ROUND(t, SHA_SRC, (((C^D)&B)^D) , 0x5a827999, A, B, C, D, E ) | |
| #define T_16_19(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (((C^D)&B)^D) , 0x5a827999, A, B, C, D, E ) | |
| #define T_20_39(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (B^C^D) , 0x6ed9eba1, A, B, C, D, E ) | |
| #define T_40_59(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, ((B&C)+(D&(B^C))) , 0x8f1bbcdc, A, B, C, D, E ) | |
| #define T_60_79(t, A, B, C, D, E) SHA_ROUND(t, SHA_MIX, (B^C^D) , 0xca62c1d6, A, B, C, D, E ) | |
| #define SHA1_WORKSPACE_WORDS 16 | |
| static void sha1_block_generic(struct sha1_block_state *state, | |
| const u8 data[SHA1_BLOCK_SIZE], | |
| u32 workspace[SHA1_WORKSPACE_WORDS]) | |
| { | |
| __u32 A, B, C, D, E; | |
| unsigned int i = 0; | |
| A = state->h[0]; | |
| B = state->h[1]; | |
| C = state->h[2]; | |
| D = state->h[3]; | |
| E = state->h[4]; | |
| /* Round 1 - iterations 0-16 take their input from 'data' */ | |
| for (; i < 16; ++i) | |
| T_0_15(i, A, B, C, D, E); | |
| /* Round 1 - tail. Input from 512-bit mixing array */ | |
| for (; i < 20; ++i) | |
| T_16_19(i, A, B, C, D, E); | |
| /* Round 2 */ | |
| for (; i < 40; ++i) | |
| T_20_39(i, A, B, C, D, E); | |
| /* Round 3 */ | |
| for (; i < 60; ++i) | |
| T_40_59(i, A, B, C, D, E); | |
| /* Round 4 */ | |
| for (; i < 80; ++i) | |
| T_60_79(i, A, B, C, D, E); | |
| state->h[0] += A; | |
| state->h[1] += B; | |
| state->h[2] += C; | |
| state->h[3] += D; | |
| state->h[4] += E; | |
| } | |
| static void __maybe_unused sha1_blocks_generic(struct sha1_block_state *state, | |
| const u8 *data, size_t nblocks) | |
| { | |
| u32 workspace[SHA1_WORKSPACE_WORDS]; | |
| do { | |
| sha1_block_generic(state, data, workspace); | |
| data += SHA1_BLOCK_SIZE; | |
| } while (--nblocks); | |
| memzero_explicit(workspace, sizeof(workspace)); | |
| } | |
| #ifdef CONFIG_CRYPTO_LIB_SHA1_ARCH | |
| #include "sha1.h" /* $(SRCARCH)/sha1.h */ | |
| #else | |
| #define sha1_blocks sha1_blocks_generic | |
| #endif | |
| void sha1_init(struct sha1_ctx *ctx) | |
| { | |
| ctx->state = sha1_iv; | |
| ctx->bytecount = 0; | |
| } | |
| EXPORT_SYMBOL_GPL(sha1_init); | |
| void sha1_update(struct sha1_ctx *ctx, const u8 *data, size_t len) | |
| { | |
| size_t partial = ctx->bytecount % SHA1_BLOCK_SIZE; | |
| ctx->bytecount += len; | |
| if (partial + len >= SHA1_BLOCK_SIZE) { | |
| size_t nblocks; | |
| if (partial) { | |
| size_t l = SHA1_BLOCK_SIZE - partial; | |
| memcpy(&ctx->buf[partial], data, l); | |
| data += l; | |
| len -= l; | |
| sha1_blocks(&ctx->state, ctx->buf, 1); | |
| } | |
| nblocks = len / SHA1_BLOCK_SIZE; | |
| len %= SHA1_BLOCK_SIZE; | |
| if (nblocks) { | |
| sha1_blocks(&ctx->state, data, nblocks); | |
| data += nblocks * SHA1_BLOCK_SIZE; | |
| } | |
| partial = 0; | |
| } | |
| if (len) | |
| memcpy(&ctx->buf[partial], data, len); | |
| } | |
| EXPORT_SYMBOL_GPL(sha1_update); | |
| static void __sha1_final(struct sha1_ctx *ctx, u8 out[SHA1_DIGEST_SIZE]) | |
| { | |
| u64 bitcount = ctx->bytecount << 3; | |
| size_t partial = ctx->bytecount % SHA1_BLOCK_SIZE; | |
| ctx->buf[partial++] = 0x80; | |
| if (partial > SHA1_BLOCK_SIZE - 8) { | |
| memset(&ctx->buf[partial], 0, SHA1_BLOCK_SIZE - partial); | |
| sha1_blocks(&ctx->state, ctx->buf, 1); | |
| partial = 0; | |
| } | |
| memset(&ctx->buf[partial], 0, SHA1_BLOCK_SIZE - 8 - partial); | |
| *(__be64 *)&ctx->buf[SHA1_BLOCK_SIZE - 8] = cpu_to_be64(bitcount); | |
| sha1_blocks(&ctx->state, ctx->buf, 1); | |
| for (size_t i = 0; i < SHA1_DIGEST_SIZE; i += 4) | |
| put_unaligned_be32(ctx->state.h[i / 4], out + i); | |
| } | |
| void sha1_final(struct sha1_ctx *ctx, u8 out[SHA1_DIGEST_SIZE]) | |
| { | |
| __sha1_final(ctx, out); | |
| memzero_explicit(ctx, sizeof(*ctx)); | |
| } | |
| EXPORT_SYMBOL_GPL(sha1_final); | |
| void sha1(const u8 *data, size_t len, u8 out[SHA1_DIGEST_SIZE]) | |
| { | |
| struct sha1_ctx ctx; | |
| sha1_init(&ctx); | |
| sha1_update(&ctx, data, len); | |
| sha1_final(&ctx, out); | |
| } | |
| EXPORT_SYMBOL_GPL(sha1); | |
| static void __hmac_sha1_preparekey(struct sha1_block_state *istate, | |
| struct sha1_block_state *ostate, | |
| const u8 *raw_key, size_t raw_key_len) | |
| { | |
| union { | |
| u8 b[SHA1_BLOCK_SIZE]; | |
| unsigned long w[SHA1_BLOCK_SIZE / sizeof(unsigned long)]; | |
| } derived_key = { 0 }; | |
| if (unlikely(raw_key_len > SHA1_BLOCK_SIZE)) | |
| sha1(raw_key, raw_key_len, derived_key.b); | |
| else | |
| memcpy(derived_key.b, raw_key, raw_key_len); | |
| for (size_t i = 0; i < ARRAY_SIZE(derived_key.w); i++) | |
| derived_key.w[i] ^= REPEAT_BYTE(HMAC_IPAD_VALUE); | |
| *istate = sha1_iv; | |
| sha1_blocks(istate, derived_key.b, 1); | |
| for (size_t i = 0; i < ARRAY_SIZE(derived_key.w); i++) | |
| derived_key.w[i] ^= REPEAT_BYTE(HMAC_OPAD_VALUE ^ | |
| HMAC_IPAD_VALUE); | |
| *ostate = sha1_iv; | |
| sha1_blocks(ostate, derived_key.b, 1); | |
| memzero_explicit(&derived_key, sizeof(derived_key)); | |
| } | |
| void hmac_sha1_preparekey(struct hmac_sha1_key *key, | |
| const u8 *raw_key, size_t raw_key_len) | |
| { | |
| __hmac_sha1_preparekey(&key->istate, &key->ostate, | |
| raw_key, raw_key_len); | |
| } | |
| EXPORT_SYMBOL_GPL(hmac_sha1_preparekey); | |
| void hmac_sha1_init(struct hmac_sha1_ctx *ctx, const struct hmac_sha1_key *key) | |
| { | |
| ctx->sha_ctx.state = key->istate; | |
| ctx->sha_ctx.bytecount = SHA1_BLOCK_SIZE; | |
| ctx->ostate = key->ostate; | |
| } | |
| EXPORT_SYMBOL_GPL(hmac_sha1_init); | |
| void hmac_sha1_init_usingrawkey(struct hmac_sha1_ctx *ctx, | |
| const u8 *raw_key, size_t raw_key_len) | |
| { | |
| __hmac_sha1_preparekey(&ctx->sha_ctx.state, &ctx->ostate, | |
| raw_key, raw_key_len); | |
| ctx->sha_ctx.bytecount = SHA1_BLOCK_SIZE; | |
| } | |
| EXPORT_SYMBOL_GPL(hmac_sha1_init_usingrawkey); | |
| void hmac_sha1_final(struct hmac_sha1_ctx *ctx, u8 out[SHA1_DIGEST_SIZE]) | |
| { | |
| /* Generate the padded input for the outer hash in ctx->sha_ctx.buf. */ | |
| __sha1_final(&ctx->sha_ctx, ctx->sha_ctx.buf); | |
| memset(&ctx->sha_ctx.buf[SHA1_DIGEST_SIZE], 0, | |
| SHA1_BLOCK_SIZE - SHA1_DIGEST_SIZE); | |
| ctx->sha_ctx.buf[SHA1_DIGEST_SIZE] = 0x80; | |
| *(__be32 *)&ctx->sha_ctx.buf[SHA1_BLOCK_SIZE - 4] = | |
| cpu_to_be32(8 * (SHA1_BLOCK_SIZE + SHA1_DIGEST_SIZE)); | |
| /* Compute the outer hash, which gives the HMAC value. */ | |
| sha1_blocks(&ctx->ostate, ctx->sha_ctx.buf, 1); | |
| for (size_t i = 0; i < SHA1_DIGEST_SIZE; i += 4) | |
| put_unaligned_be32(ctx->ostate.h[i / 4], out + i); | |
| memzero_explicit(ctx, sizeof(*ctx)); | |
| } | |
| EXPORT_SYMBOL_GPL(hmac_sha1_final); | |
| void hmac_sha1(const struct hmac_sha1_key *key, | |
| const u8 *data, size_t data_len, u8 out[SHA1_DIGEST_SIZE]) | |
| { | |
| struct hmac_sha1_ctx ctx; | |
| hmac_sha1_init(&ctx, key); | |
| hmac_sha1_update(&ctx, data, data_len); | |
| hmac_sha1_final(&ctx, out); | |
| } | |
| EXPORT_SYMBOL_GPL(hmac_sha1); | |
| void hmac_sha1_usingrawkey(const u8 *raw_key, size_t raw_key_len, | |
| const u8 *data, size_t data_len, | |
| u8 out[SHA1_DIGEST_SIZE]) | |
| { | |
| struct hmac_sha1_ctx ctx; | |
| hmac_sha1_init_usingrawkey(&ctx, raw_key, raw_key_len); | |
| hmac_sha1_update(&ctx, data, data_len); | |
| hmac_sha1_final(&ctx, out); | |
| } | |
| EXPORT_SYMBOL_GPL(hmac_sha1_usingrawkey); | |
| #if defined(sha1_mod_init_arch) || defined(CONFIG_CRYPTO_FIPS) | |
| static int __init sha1_mod_init(void) | |
| { | |
| #ifdef sha1_mod_init_arch | |
| sha1_mod_init_arch(); | |
| #endif | |
| if (fips_enabled) { | |
| /* | |
| * FIPS cryptographic algorithm self-test. As per the FIPS | |
| * Implementation Guidance, testing HMAC-SHA1 satisfies the test | |
| * requirement for SHA-1 too. | |
| */ | |
| u8 mac[SHA1_DIGEST_SIZE]; | |
| hmac_sha1_usingrawkey(fips_test_key, sizeof(fips_test_key), | |
| fips_test_data, sizeof(fips_test_data), | |
| mac); | |
| if (memcmp(fips_test_hmac_sha1_value, mac, sizeof(mac)) != 0) | |
| panic("sha1: FIPS self-test failed\n"); | |
| } | |
| return 0; | |
| } | |
| subsys_initcall(sha1_mod_init); | |
| static void __exit sha1_mod_exit(void) | |
| { | |
| } | |
| module_exit(sha1_mod_exit); | |
| #endif | |
| MODULE_DESCRIPTION("SHA-1 and HMAC-SHA1 library functions"); | |
| MODULE_LICENSE("GPL"); |