| // SPDX-License-Identifier: GPL-2.0 | |
| // Copyright (C) 2024 FUJITA Tomonori <fujita.tomonori@gmail.com> | |
| //! PHY register interfaces. | |
| //! | |
| //! This module provides support for accessing PHY registers in the | |
| //! Ethernet management interface clauses 22 and 45 register namespaces, as | |
| //! defined in IEEE 802.3. | |
| use super::Device; | |
| use crate::{ | |
| build_assert::build_assert, | |
| error::*, | |
| uapi, // | |
| }; | |
| mod private { | |
| /// Marker that a trait cannot be implemented outside of this crate | |
| pub trait Sealed {} | |
| } | |
| /// Accesses PHY registers. | |
| /// | |
| /// This trait is used to implement the unified interface to access | |
| /// C22 and C45 PHY registers. | |
| /// | |
| /// # Examples | |
| /// | |
| /// ```ignore | |
| /// fn link_change_notify(dev: &mut Device) { | |
| /// // read C22 BMCR register | |
| /// dev.read(C22::BMCR); | |
| /// // read C45 PMA/PMD control 1 register | |
| /// dev.read(C45::new(Mmd::PMAPMD, 0)); | |
| /// | |
| /// // Checks the link status as reported by registers in the C22 namespace | |
| /// // and updates current link state. | |
| /// dev.genphy_read_status::<phy::C22>(); | |
| /// // Checks the link status as reported by registers in the C45 namespace | |
| /// // and updates current link state. | |
| /// dev.genphy_read_status::<phy::C45>(); | |
| /// } | |
| /// ``` | |
| pub trait Register: private::Sealed { | |
| /// Reads a PHY register. | |
| fn read(&self, dev: &mut Device) -> Result<u16>; | |
| /// Writes a PHY register. | |
| fn write(&self, dev: &mut Device, val: u16) -> Result; | |
| /// Checks the link status and updates current link state. | |
| fn read_status(dev: &mut Device) -> Result<u16>; | |
| } | |
| /// A single MDIO clause 22 register address (5 bits). | |
| #[derive(Copy, Clone, Debug)] | |
| pub struct C22(u8); | |
| impl C22 { | |
| /// Basic mode control. | |
| pub const BMCR: Self = C22(0x00); | |
| /// Basic mode status. | |
| pub const BMSR: Self = C22(0x01); | |
| /// PHY identifier 1. | |
| pub const PHYSID1: Self = C22(0x02); | |
| /// PHY identifier 2. | |
| pub const PHYSID2: Self = C22(0x03); | |
| /// Auto-negotiation advertisement. | |
| pub const ADVERTISE: Self = C22(0x04); | |
| /// Auto-negotiation link partner base page ability. | |
| pub const LPA: Self = C22(0x05); | |
| /// Auto-negotiation expansion. | |
| pub const EXPANSION: Self = C22(0x06); | |
| /// Auto-negotiation next page transmit. | |
| pub const NEXT_PAGE_TRANSMIT: Self = C22(0x07); | |
| /// Auto-negotiation link partner received next page. | |
| pub const LP_RECEIVED_NEXT_PAGE: Self = C22(0x08); | |
| /// Master-slave control. | |
| pub const MASTER_SLAVE_CONTROL: Self = C22(0x09); | |
| /// Master-slave status. | |
| pub const MASTER_SLAVE_STATUS: Self = C22(0x0a); | |
| /// PSE Control. | |
| pub const PSE_CONTROL: Self = C22(0x0b); | |
| /// PSE Status. | |
| pub const PSE_STATUS: Self = C22(0x0c); | |
| /// MMD Register control. | |
| pub const MMD_CONTROL: Self = C22(0x0d); | |
| /// MMD Register address data. | |
| pub const MMD_DATA: Self = C22(0x0e); | |
| /// Extended status. | |
| pub const EXTENDED_STATUS: Self = C22(0x0f); | |
| /// Creates a new instance of `C22` with a vendor specific register. | |
| pub const fn vendor_specific<const N: u8>() -> Self { | |
| build_assert!( | |
| N > 0x0f && N < 0x20, | |
| "Vendor-specific register address must be between 16 and 31" | |
| ); | |
| C22(N) | |
| } | |
| } | |
| impl private::Sealed for C22 {} | |
| impl Register for C22 { | |
| fn read(&self, dev: &mut Device) -> Result<u16> { | |
| let phydev = dev.0.get(); | |
| // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Device`. | |
| // So it's just an FFI call, open code of `phy_read()` with a valid `phy_device` pointer | |
| // `phydev`. | |
| let ret = unsafe { | |
| bindings::mdiobus_read((*phydev).mdio.bus, (*phydev).mdio.addr, self.0.into()) | |
| }; | |
| to_result(ret)?; | |
| Ok(ret as u16) | |
| } | |
| fn write(&self, dev: &mut Device, val: u16) -> Result { | |
| let phydev = dev.0.get(); | |
| // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Device`. | |
| // So it's just an FFI call, open code of `phy_write()` with a valid `phy_device` pointer | |
| // `phydev`. | |
| to_result(unsafe { | |
| bindings::mdiobus_write((*phydev).mdio.bus, (*phydev).mdio.addr, self.0.into(), val) | |
| }) | |
| } | |
| fn read_status(dev: &mut Device) -> Result<u16> { | |
| let phydev = dev.0.get(); | |
| // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`. | |
| // So it's just an FFI call. | |
| let ret = unsafe { bindings::genphy_read_status(phydev) }; | |
| to_result(ret)?; | |
| Ok(ret as u16) | |
| } | |
| } | |
| /// A single MDIO clause 45 register device and address. | |
| #[derive(Copy, Clone, Debug)] | |
| pub struct Mmd(u8); | |
| impl Mmd { | |
| /// Physical Medium Attachment/Dependent. | |
| pub const PMAPMD: Self = Mmd(uapi::MDIO_MMD_PMAPMD as u8); | |
| /// WAN interface sublayer. | |
| pub const WIS: Self = Mmd(uapi::MDIO_MMD_WIS as u8); | |
| /// Physical coding sublayer. | |
| pub const PCS: Self = Mmd(uapi::MDIO_MMD_PCS as u8); | |
| /// PHY Extender sublayer. | |
| pub const PHYXS: Self = Mmd(uapi::MDIO_MMD_PHYXS as u8); | |
| /// DTE Extender sublayer. | |
| pub const DTEXS: Self = Mmd(uapi::MDIO_MMD_DTEXS as u8); | |
| /// Transmission convergence. | |
| pub const TC: Self = Mmd(uapi::MDIO_MMD_TC as u8); | |
| /// Auto negotiation. | |
| pub const AN: Self = Mmd(uapi::MDIO_MMD_AN as u8); | |
| /// Separated PMA (1). | |
| pub const SEPARATED_PMA1: Self = Mmd(8); | |
| /// Separated PMA (2). | |
| pub const SEPARATED_PMA2: Self = Mmd(9); | |
| /// Separated PMA (3). | |
| pub const SEPARATED_PMA3: Self = Mmd(10); | |
| /// Separated PMA (4). | |
| pub const SEPARATED_PMA4: Self = Mmd(11); | |
| /// OFDM PMA/PMD. | |
| pub const OFDM_PMAPMD: Self = Mmd(12); | |
| /// Power unit. | |
| pub const POWER_UNIT: Self = Mmd(13); | |
| /// Clause 22 extension. | |
| pub const C22_EXT: Self = Mmd(uapi::MDIO_MMD_C22EXT as u8); | |
| /// Vendor specific 1. | |
| pub const VEND1: Self = Mmd(uapi::MDIO_MMD_VEND1 as u8); | |
| /// Vendor specific 2. | |
| pub const VEND2: Self = Mmd(uapi::MDIO_MMD_VEND2 as u8); | |
| } | |
| /// A single MDIO clause 45 register device and address. | |
| /// | |
| /// Clause 45 uses a 5-bit device address to access a specific MMD within | |
| /// a port, then a 16-bit register address to access a location within | |
| /// that device. `C45` represents this by storing a [`Mmd`] and | |
| /// a register number. | |
| pub struct C45 { | |
| devad: Mmd, | |
| regnum: u16, | |
| } | |
| impl C45 { | |
| /// Creates a new instance of `C45`. | |
| pub fn new(devad: Mmd, regnum: u16) -> Self { | |
| Self { devad, regnum } | |
| } | |
| } | |
| impl private::Sealed for C45 {} | |
| impl Register for C45 { | |
| fn read(&self, dev: &mut Device) -> Result<u16> { | |
| let phydev = dev.0.get(); | |
| // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Device`. | |
| // So it's just an FFI call. | |
| let ret = | |
| unsafe { bindings::phy_read_mmd(phydev, self.devad.0.into(), self.regnum.into()) }; | |
| to_result(ret)?; | |
| Ok(ret as u16) | |
| } | |
| fn write(&self, dev: &mut Device, val: u16) -> Result { | |
| let phydev = dev.0.get(); | |
| // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Device`. | |
| // So it's just an FFI call. | |
| to_result(unsafe { | |
| bindings::phy_write_mmd(phydev, self.devad.0.into(), self.regnum.into(), val) | |
| }) | |
| } | |
| fn read_status(dev: &mut Device) -> Result<u16> { | |
| let phydev = dev.0.get(); | |
| // SAFETY: `phydev` is pointing to a valid object by the type invariant of `Self`. | |
| // So it's just an FFI call. | |
| let ret = unsafe { bindings::genphy_c45_read_status(phydev) }; | |
| to_result(ret)?; | |
| Ok(ret as u16) | |
| } | |
| } |