Documentation/devicetree/bindings/regulator/samsung,s2mpa01.yaml

# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/regulator/samsung,s2mpa01.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Samsung S2MPA01 Power Management IC regulators

maintainers:
  - Krzysztof Kozlowski <krzk@kernel.org>

description: |
  This is a part of device tree bindings for S2M and S5M family of Power
  Management IC (PMIC).

  The S2MPA01 provides buck and LDO regulators.

  See also Documentation/devicetree/bindings/mfd/samsung,s2mpa01.yaml for
  additional information and example.

patternProperties:
  # 26 LDOs
  "^LDO([1-9]|1[0-9]|2[0-6])$":
    type: object
    $ref: regulator.yaml#
    unevaluatedProperties: false
    description:
      Properties for single LDO regulator.

    required:
      - regulator-name

  # 10 bucks
  "^BUCK([1-9]|10)$":
    type: object
    $ref: regulator.yaml#
    unevaluatedProperties: false
    description:
      Properties for single BUCK regulator.

    properties:
      regulator-ramp-delay:
        enum: [0, 6250, 12500, 25000, 50000]
        default: 12500
        description: |
          May be 0 for disabling the ramp delay on BUCK{1,2,3,4}.

          In the absence of the regulator-ramp-delay property, the default ramp
          delay will be used.

          Note: Some bucks share the ramp rate setting i.e. same ramp value
          will be set for a particular group of bucks so provide the same
          regulator-ramp-delay value for them.
          Groups sharing ramp rate:
            * buck{1,6},
            * buck{2,4},
            * buck{8,9,10}.

    required:
      - regulator-name

additionalProperties: false