| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * linux/fs/jbd2/recovery.c |
| * |
| * Written by Stephen C. Tweedie <sct@redhat.com>, 1999 |
| * |
| * Copyright 1999-2000 Red Hat Software --- All Rights Reserved |
| * |
| * Journal recovery routines for the generic filesystem journaling code; |
| * part of the ext2fs journaling system. |
| */ |
| |
| #ifndef __KERNEL__ |
| #include "jfs_user.h" |
| #else |
| #include <linux/time.h> |
| #include <linux/fs.h> |
| #include <linux/jbd2.h> |
| #include <linux/errno.h> |
| #include <linux/crc32.h> |
| #include <linux/blkdev.h> |
| #include <linux/string_choices.h> |
| #endif |
| |
| /* |
| * Maintain information about the progress of the recovery job, so that |
| * the different passes can carry information between them. |
| */ |
| struct recovery_info |
| { |
| tid_t start_transaction; |
| tid_t end_transaction; |
| unsigned long head_block; |
| |
| int nr_replays; |
| int nr_revokes; |
| int nr_revoke_hits; |
| }; |
| |
| static int do_one_pass(journal_t *journal, |
| struct recovery_info *info, enum passtype pass); |
| static int scan_revoke_records(journal_t *, struct buffer_head *, |
| tid_t, struct recovery_info *); |
| |
| #ifdef __KERNEL__ |
| |
| /* Release readahead buffers after use */ |
| static void journal_brelse_array(struct buffer_head *b[], int n) |
| { |
| while (--n >= 0) |
| brelse (b[n]); |
| } |
| |
| |
| /* |
| * When reading from the journal, we are going through the block device |
| * layer directly and so there is no readahead being done for us. We |
| * need to implement any readahead ourselves if we want it to happen at |
| * all. Recovery is basically one long sequential read, so make sure we |
| * do the IO in reasonably large chunks. |
| * |
| * This is not so critical that we need to be enormously clever about |
| * the readahead size, though. 128K is a purely arbitrary, good-enough |
| * fixed value. |
| */ |
| |
| #define MAXBUF 8 |
| static int do_readahead(journal_t *journal, unsigned int start) |
| { |
| int err; |
| unsigned int max, nbufs, next; |
| unsigned long long blocknr; |
| struct buffer_head *bh; |
| |
| struct buffer_head * bufs[MAXBUF]; |
| |
| /* Do up to 128K of readahead */ |
| max = start + (128 * 1024 / journal->j_blocksize); |
| if (max > journal->j_total_len) |
| max = journal->j_total_len; |
| |
| /* Do the readahead itself. We'll submit MAXBUF buffer_heads at |
| * a time to the block device IO layer. */ |
| |
| nbufs = 0; |
| |
| for (next = start; next < max; next++) { |
| err = jbd2_journal_bmap(journal, next, &blocknr); |
| |
| if (err) { |
| printk(KERN_ERR "JBD2: bad block at offset %u\n", |
| next); |
| goto failed; |
| } |
| |
| bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize); |
| if (!bh) { |
| err = -ENOMEM; |
| goto failed; |
| } |
| |
| if (!buffer_uptodate(bh) && !buffer_locked(bh)) { |
| bufs[nbufs++] = bh; |
| if (nbufs == MAXBUF) { |
| bh_readahead_batch(nbufs, bufs, 0); |
| journal_brelse_array(bufs, nbufs); |
| nbufs = 0; |
| } |
| } else |
| brelse(bh); |
| } |
| |
| if (nbufs) |
| bh_readahead_batch(nbufs, bufs, 0); |
| err = 0; |
| |
| failed: |
| if (nbufs) |
| journal_brelse_array(bufs, nbufs); |
| return err; |
| } |
| |
| #endif /* __KERNEL__ */ |
| |
| |
| /* |
| * Read a block from the journal |
| */ |
| |
| static int jread(struct buffer_head **bhp, journal_t *journal, |
| unsigned int offset) |
| { |
| int err; |
| unsigned long long blocknr; |
| struct buffer_head *bh; |
| |
| *bhp = NULL; |
| |
| if (offset >= journal->j_total_len) { |
| printk(KERN_ERR "JBD2: corrupted journal superblock\n"); |
| return -EFSCORRUPTED; |
| } |
| |
| err = jbd2_journal_bmap(journal, offset, &blocknr); |
| |
| if (err) { |
| printk(KERN_ERR "JBD2: bad block at offset %u\n", |
| offset); |
| return err; |
| } |
| |
| bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize); |
| if (!bh) |
| return -ENOMEM; |
| |
| if (!buffer_uptodate(bh)) { |
| /* |
| * If this is a brand new buffer, start readahead. |
| * Otherwise, we assume we are already reading it. |
| */ |
| bool need_readahead = !buffer_req(bh); |
| |
| bh_read_nowait(bh, 0); |
| if (need_readahead) |
| do_readahead(journal, offset); |
| wait_on_buffer(bh); |
| } |
| |
| if (!buffer_uptodate(bh)) { |
| printk(KERN_ERR "JBD2: Failed to read block at offset %u\n", |
| offset); |
| brelse(bh); |
| return -EIO; |
| } |
| |
| *bhp = bh; |
| return 0; |
| } |
| |
| static int jbd2_descriptor_block_csum_verify(journal_t *j, void *buf) |
| { |
| struct jbd2_journal_block_tail *tail; |
| __be32 provided; |
| __u32 calculated; |
| |
| if (!jbd2_journal_has_csum_v2or3(j)) |
| return 1; |
| |
| tail = (struct jbd2_journal_block_tail *)((char *)buf + |
| j->j_blocksize - sizeof(struct jbd2_journal_block_tail)); |
| provided = tail->t_checksum; |
| tail->t_checksum = 0; |
| calculated = jbd2_chksum(j, j->j_csum_seed, buf, j->j_blocksize); |
| tail->t_checksum = provided; |
| |
| return provided == cpu_to_be32(calculated); |
| } |
| |
| /* |
| * Count the number of in-use tags in a journal descriptor block. |
| */ |
| |
| static int count_tags(journal_t *journal, struct buffer_head *bh) |
| { |
| char * tagp; |
| journal_block_tag_t tag; |
| int nr = 0, size = journal->j_blocksize; |
| int tag_bytes = journal_tag_bytes(journal); |
| |
| if (jbd2_journal_has_csum_v2or3(journal)) |
| size -= sizeof(struct jbd2_journal_block_tail); |
| |
| tagp = &bh->b_data[sizeof(journal_header_t)]; |
| |
| while ((tagp - bh->b_data + tag_bytes) <= size) { |
| memcpy(&tag, tagp, sizeof(tag)); |
| |
| nr++; |
| tagp += tag_bytes; |
| if (!(tag.t_flags & cpu_to_be16(JBD2_FLAG_SAME_UUID))) |
| tagp += 16; |
| |
| if (tag.t_flags & cpu_to_be16(JBD2_FLAG_LAST_TAG)) |
| break; |
| } |
| |
| return nr; |
| } |
| |
| |
| /* Make sure we wrap around the log correctly! */ |
| #define wrap(journal, var) \ |
| do { \ |
| if (var >= (journal)->j_last) \ |
| var -= ((journal)->j_last - (journal)->j_first); \ |
| } while (0) |
| |
| static int fc_do_one_pass(journal_t *journal, |
| struct recovery_info *info, enum passtype pass) |
| { |
| unsigned int expected_commit_id = info->end_transaction; |
| unsigned long next_fc_block; |
| struct buffer_head *bh; |
| int err = 0; |
| |
| next_fc_block = journal->j_fc_first; |
| if (!journal->j_fc_replay_callback) |
| return 0; |
| |
| while (next_fc_block <= journal->j_fc_last) { |
| jbd2_debug(3, "Fast commit replay: next block %ld\n", |
| next_fc_block); |
| err = jread(&bh, journal, next_fc_block); |
| if (err) { |
| jbd2_debug(3, "Fast commit replay: read error\n"); |
| break; |
| } |
| |
| err = journal->j_fc_replay_callback(journal, bh, pass, |
| next_fc_block - journal->j_fc_first, |
| expected_commit_id); |
| brelse(bh); |
| next_fc_block++; |
| if (err < 0 || err == JBD2_FC_REPLAY_STOP) |
| break; |
| err = 0; |
| } |
| |
| if (err) |
| jbd2_debug(3, "Fast commit replay failed, err = %d\n", err); |
| |
| return err; |
| } |
| |
| /** |
| * jbd2_journal_recover - recovers a on-disk journal |
| * @journal: the journal to recover |
| * |
| * The primary function for recovering the log contents when mounting a |
| * journaled device. |
| * |
| * Recovery is done in three passes. In the first pass, we look for the |
| * end of the log. In the second, we assemble the list of revoke |
| * blocks. In the third and final pass, we replay any un-revoked blocks |
| * in the log. |
| */ |
| int jbd2_journal_recover(journal_t *journal) |
| { |
| int err, err2; |
| journal_superblock_t * sb; |
| |
| struct recovery_info info; |
| |
| memset(&info, 0, sizeof(info)); |
| sb = journal->j_superblock; |
| |
| /* |
| * The journal superblock's s_start field (the current log head) |
| * is always zero if, and only if, the journal was cleanly |
| * unmounted. |
| */ |
| if (!sb->s_start) { |
| jbd2_debug(1, "No recovery required, last transaction %d, head block %u\n", |
| be32_to_cpu(sb->s_sequence), be32_to_cpu(sb->s_head)); |
| journal->j_transaction_sequence = be32_to_cpu(sb->s_sequence) + 1; |
| journal->j_head = be32_to_cpu(sb->s_head); |
| return 0; |
| } |
| |
| err = do_one_pass(journal, &info, PASS_SCAN); |
| if (!err) |
| err = do_one_pass(journal, &info, PASS_REVOKE); |
| if (!err) |
| err = do_one_pass(journal, &info, PASS_REPLAY); |
| |
| jbd2_debug(1, "JBD2: recovery, exit status %d, " |
| "recovered transactions %u to %u\n", |
| err, info.start_transaction, info.end_transaction); |
| jbd2_debug(1, "JBD2: Replayed %d and revoked %d/%d blocks\n", |
| info.nr_replays, info.nr_revoke_hits, info.nr_revokes); |
| |
| /* Restart the log at the next transaction ID, thus invalidating |
| * any existing commit records in the log. */ |
| journal->j_transaction_sequence = ++info.end_transaction; |
| journal->j_head = info.head_block; |
| jbd2_debug(1, "JBD2: last transaction %d, head block %lu\n", |
| journal->j_transaction_sequence, journal->j_head); |
| |
| jbd2_journal_clear_revoke(journal); |
| err2 = sync_blockdev(journal->j_fs_dev); |
| if (!err) |
| err = err2; |
| err2 = jbd2_check_fs_dev_write_error(journal); |
| if (!err) |
| err = err2; |
| /* Make sure all replayed data is on permanent storage */ |
| if (journal->j_flags & JBD2_BARRIER) { |
| err2 = blkdev_issue_flush(journal->j_fs_dev); |
| if (!err) |
| err = err2; |
| } |
| return err; |
| } |
| |
| /** |
| * jbd2_journal_skip_recovery - Start journal and wipe exiting records |
| * @journal: journal to startup |
| * |
| * Locate any valid recovery information from the journal and set up the |
| * journal structures in memory to ignore it (presumably because the |
| * caller has evidence that it is out of date). |
| * This function doesn't appear to be exported.. |
| * |
| * We perform one pass over the journal to allow us to tell the user how |
| * much recovery information is being erased, and to let us initialise |
| * the journal transaction sequence numbers to the next unused ID. |
| */ |
| int jbd2_journal_skip_recovery(journal_t *journal) |
| { |
| int err; |
| |
| struct recovery_info info; |
| |
| memset (&info, 0, sizeof(info)); |
| |
| err = do_one_pass(journal, &info, PASS_SCAN); |
| |
| if (err) { |
| printk(KERN_ERR "JBD2: error %d scanning journal\n", err); |
| ++journal->j_transaction_sequence; |
| journal->j_head = journal->j_first; |
| } else { |
| #ifdef CONFIG_JBD2_DEBUG |
| int dropped = info.end_transaction - |
| be32_to_cpu(journal->j_superblock->s_sequence); |
| jbd2_debug(1, |
| "JBD2: ignoring %d transaction%s from the journal.\n", |
| dropped, str_plural(dropped)); |
| #endif |
| journal->j_transaction_sequence = ++info.end_transaction; |
| journal->j_head = info.head_block; |
| } |
| |
| journal->j_tail = 0; |
| return err; |
| } |
| |
| static inline unsigned long long read_tag_block(journal_t *journal, |
| journal_block_tag_t *tag) |
| { |
| unsigned long long block = be32_to_cpu(tag->t_blocknr); |
| if (jbd2_has_feature_64bit(journal)) |
| block |= (u64)be32_to_cpu(tag->t_blocknr_high) << 32; |
| return block; |
| } |
| |
| /* |
| * calc_chksums calculates the checksums for the blocks described in the |
| * descriptor block. |
| */ |
| static int calc_chksums(journal_t *journal, struct buffer_head *bh, |
| unsigned long *next_log_block, __u32 *crc32_sum) |
| { |
| int i, num_blks, err; |
| unsigned long io_block; |
| struct buffer_head *obh; |
| |
| num_blks = count_tags(journal, bh); |
| /* Calculate checksum of the descriptor block. */ |
| *crc32_sum = crc32_be(*crc32_sum, (void *)bh->b_data, bh->b_size); |
| |
| for (i = 0; i < num_blks; i++) { |
| io_block = (*next_log_block)++; |
| wrap(journal, *next_log_block); |
| err = jread(&obh, journal, io_block); |
| if (err) { |
| printk(KERN_ERR "JBD2: IO error %d recovering block " |
| "%lu in log\n", err, io_block); |
| return 1; |
| } else { |
| *crc32_sum = crc32_be(*crc32_sum, (void *)obh->b_data, |
| obh->b_size); |
| } |
| put_bh(obh); |
| } |
| return 0; |
| } |
| |
| static int jbd2_commit_block_csum_verify(journal_t *j, void *buf) |
| { |
| struct commit_header *h; |
| __be32 provided; |
| __u32 calculated; |
| |
| if (!jbd2_journal_has_csum_v2or3(j)) |
| return 1; |
| |
| h = buf; |
| provided = h->h_chksum[0]; |
| h->h_chksum[0] = 0; |
| calculated = jbd2_chksum(j, j->j_csum_seed, buf, j->j_blocksize); |
| h->h_chksum[0] = provided; |
| |
| return provided == cpu_to_be32(calculated); |
| } |
| |
| static bool jbd2_commit_block_csum_verify_partial(journal_t *j, void *buf) |
| { |
| struct commit_header *h; |
| __be32 provided; |
| __u32 calculated; |
| void *tmpbuf; |
| |
| tmpbuf = kzalloc(j->j_blocksize, GFP_KERNEL); |
| if (!tmpbuf) |
| return false; |
| |
| memcpy(tmpbuf, buf, sizeof(struct commit_header)); |
| h = tmpbuf; |
| provided = h->h_chksum[0]; |
| h->h_chksum[0] = 0; |
| calculated = jbd2_chksum(j, j->j_csum_seed, tmpbuf, j->j_blocksize); |
| kfree(tmpbuf); |
| |
| return provided == cpu_to_be32(calculated); |
| } |
| |
| static int jbd2_block_tag_csum_verify(journal_t *j, journal_block_tag_t *tag, |
| journal_block_tag3_t *tag3, |
| void *buf, __u32 sequence) |
| { |
| __u32 csum32; |
| __be32 seq; |
| |
| if (!jbd2_journal_has_csum_v2or3(j)) |
| return 1; |
| |
| seq = cpu_to_be32(sequence); |
| csum32 = jbd2_chksum(j, j->j_csum_seed, (__u8 *)&seq, sizeof(seq)); |
| csum32 = jbd2_chksum(j, csum32, buf, j->j_blocksize); |
| |
| if (jbd2_has_feature_csum3(j)) |
| return tag3->t_checksum == cpu_to_be32(csum32); |
| else |
| return tag->t_checksum == cpu_to_be16(csum32); |
| } |
| |
| static __always_inline int jbd2_do_replay(journal_t *journal, |
| struct recovery_info *info, |
| struct buffer_head *bh, |
| unsigned long *next_log_block, |
| unsigned int next_commit_ID) |
| { |
| char *tagp; |
| int flags; |
| int ret = 0; |
| int tag_bytes = journal_tag_bytes(journal); |
| int descr_csum_size = 0; |
| unsigned long io_block; |
| journal_block_tag_t tag; |
| struct buffer_head *obh; |
| struct buffer_head *nbh; |
| |
| if (jbd2_journal_has_csum_v2or3(journal)) |
| descr_csum_size = sizeof(struct jbd2_journal_block_tail); |
| |
| tagp = &bh->b_data[sizeof(journal_header_t)]; |
| while (tagp - bh->b_data + tag_bytes <= |
| journal->j_blocksize - descr_csum_size) { |
| int err; |
| |
| memcpy(&tag, tagp, sizeof(tag)); |
| flags = be16_to_cpu(tag.t_flags); |
| |
| io_block = (*next_log_block)++; |
| wrap(journal, *next_log_block); |
| err = jread(&obh, journal, io_block); |
| if (err) { |
| /* Recover what we can, but report failure at the end. */ |
| ret = err; |
| pr_err("JBD2: IO error %d recovering block %lu in log\n", |
| err, io_block); |
| } else { |
| unsigned long long blocknr; |
| |
| J_ASSERT(obh != NULL); |
| blocknr = read_tag_block(journal, &tag); |
| |
| /* If the block has been revoked, then we're all done here. */ |
| if (jbd2_journal_test_revoke(journal, blocknr, |
| next_commit_ID)) { |
| brelse(obh); |
| ++info->nr_revoke_hits; |
| goto skip_write; |
| } |
| |
| /* Look for block corruption */ |
| if (!jbd2_block_tag_csum_verify(journal, &tag, |
| (journal_block_tag3_t *)tagp, |
| obh->b_data, next_commit_ID)) { |
| brelse(obh); |
| ret = -EFSBADCRC; |
| pr_err("JBD2: Invalid checksum recovering data block %llu in journal block %lu\n", |
| blocknr, io_block); |
| goto skip_write; |
| } |
| |
| /* Find a buffer for the new data being restored */ |
| nbh = __getblk(journal->j_fs_dev, blocknr, |
| journal->j_blocksize); |
| if (nbh == NULL) { |
| pr_err("JBD2: Out of memory during recovery.\n"); |
| brelse(obh); |
| return -ENOMEM; |
| } |
| |
| lock_buffer(nbh); |
| memcpy(nbh->b_data, obh->b_data, journal->j_blocksize); |
| if (flags & JBD2_FLAG_ESCAPE) { |
| *((__be32 *)nbh->b_data) = |
| cpu_to_be32(JBD2_MAGIC_NUMBER); |
| } |
| |
| BUFFER_TRACE(nbh, "marking dirty"); |
| set_buffer_uptodate(nbh); |
| mark_buffer_dirty(nbh); |
| BUFFER_TRACE(nbh, "marking uptodate"); |
| ++info->nr_replays; |
| unlock_buffer(nbh); |
| brelse(obh); |
| brelse(nbh); |
| } |
| |
| skip_write: |
| tagp += tag_bytes; |
| if (!(flags & JBD2_FLAG_SAME_UUID)) |
| tagp += 16; |
| |
| if (flags & JBD2_FLAG_LAST_TAG) |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int do_one_pass(journal_t *journal, |
| struct recovery_info *info, enum passtype pass) |
| { |
| unsigned int first_commit_ID, next_commit_ID; |
| unsigned long next_log_block, head_block; |
| int err, success = 0; |
| journal_superblock_t * sb; |
| journal_header_t * tmp; |
| struct buffer_head *bh = NULL; |
| unsigned int sequence; |
| int blocktype; |
| __u32 crc32_sum = ~0; /* Transactional Checksums */ |
| bool need_check_commit_time = false; |
| __u64 last_trans_commit_time = 0, commit_time; |
| |
| /* |
| * First thing is to establish what we expect to find in the log |
| * (in terms of transaction IDs), and where (in terms of log |
| * block offsets): query the superblock. |
| */ |
| |
| sb = journal->j_superblock; |
| next_commit_ID = be32_to_cpu(sb->s_sequence); |
| next_log_block = be32_to_cpu(sb->s_start); |
| head_block = next_log_block; |
| |
| first_commit_ID = next_commit_ID; |
| if (pass == PASS_SCAN) |
| info->start_transaction = first_commit_ID; |
| |
| jbd2_debug(1, "Starting recovery pass %d\n", pass); |
| |
| /* |
| * Now we walk through the log, transaction by transaction, |
| * making sure that each transaction has a commit block in the |
| * expected place. Each complete transaction gets replayed back |
| * into the main filesystem. |
| */ |
| |
| while (1) { |
| cond_resched(); |
| |
| /* If we already know where to stop the log traversal, |
| * check right now that we haven't gone past the end of |
| * the log. */ |
| |
| if (pass != PASS_SCAN) |
| if (tid_geq(next_commit_ID, info->end_transaction)) |
| break; |
| |
| jbd2_debug(2, "Scanning for sequence ID %u at %lu/%lu\n", |
| next_commit_ID, next_log_block, journal->j_last); |
| |
| /* Skip over each chunk of the transaction looking |
| * either the next descriptor block or the final commit |
| * record. */ |
| |
| jbd2_debug(3, "JBD2: checking block %ld\n", next_log_block); |
| brelse(bh); |
| bh = NULL; |
| err = jread(&bh, journal, next_log_block); |
| if (err) |
| goto failed; |
| |
| next_log_block++; |
| wrap(journal, next_log_block); |
| |
| /* What kind of buffer is it? |
| * |
| * If it is a descriptor block, check that it has the |
| * expected sequence number. Otherwise, we're all done |
| * here. */ |
| |
| tmp = (journal_header_t *)bh->b_data; |
| |
| if (tmp->h_magic != cpu_to_be32(JBD2_MAGIC_NUMBER)) |
| break; |
| |
| blocktype = be32_to_cpu(tmp->h_blocktype); |
| sequence = be32_to_cpu(tmp->h_sequence); |
| jbd2_debug(3, "Found magic %d, sequence %d\n", |
| blocktype, sequence); |
| |
| if (sequence != next_commit_ID) |
| break; |
| |
| /* OK, we have a valid descriptor block which matches |
| * all of the sequence number checks. What are we going |
| * to do with it? That depends on the pass... */ |
| |
| switch(blocktype) { |
| case JBD2_DESCRIPTOR_BLOCK: |
| /* Verify checksum first */ |
| if (!jbd2_descriptor_block_csum_verify(journal, |
| bh->b_data)) { |
| /* |
| * PASS_SCAN can see stale blocks due to lazy |
| * journal init. Don't error out on those yet. |
| */ |
| if (pass != PASS_SCAN) { |
| pr_err("JBD2: Invalid checksum recovering block %lu in log\n", |
| next_log_block); |
| err = -EFSBADCRC; |
| goto failed; |
| } |
| need_check_commit_time = true; |
| jbd2_debug(1, |
| "invalid descriptor block found in %lu\n", |
| next_log_block); |
| } |
| |
| /* If it is a valid descriptor block, replay it |
| * in pass REPLAY; if journal_checksums enabled, then |
| * calculate checksums in PASS_SCAN, otherwise, |
| * just skip over the blocks it describes. */ |
| if (pass != PASS_REPLAY) { |
| if (pass == PASS_SCAN && |
| jbd2_has_feature_checksum(journal) && |
| !info->end_transaction) { |
| if (calc_chksums(journal, bh, |
| &next_log_block, |
| &crc32_sum)) |
| break; |
| continue; |
| } |
| next_log_block += count_tags(journal, bh); |
| wrap(journal, next_log_block); |
| continue; |
| } |
| |
| /* |
| * A descriptor block: we can now write all of the |
| * data blocks. Yay, useful work is finally getting |
| * done here! |
| */ |
| err = jbd2_do_replay(journal, info, bh, &next_log_block, |
| next_commit_ID); |
| if (err) { |
| if (err == -ENOMEM) |
| goto failed; |
| success = err; |
| } |
| |
| continue; |
| |
| case JBD2_COMMIT_BLOCK: |
| if (pass != PASS_SCAN) { |
| next_commit_ID++; |
| continue; |
| } |
| |
| /* How to differentiate between interrupted commit |
| * and journal corruption ? |
| * |
| * {nth transaction} |
| * Checksum Verification Failed |
| * | |
| * ____________________ |
| * | | |
| * async_commit sync_commit |
| * | | |
| * | GO TO NEXT "Journal Corruption" |
| * | TRANSACTION |
| * | |
| * {(n+1)th transanction} |
| * | |
| * _______|______________ |
| * | | |
| * Commit block found Commit block not found |
| * | | |
| * "Journal Corruption" | |
| * _____________|_________ |
| * | | |
| * nth trans corrupt OR nth trans |
| * and (n+1)th interrupted interrupted |
| * before commit block |
| * could reach the disk. |
| * (Cannot find the difference in above |
| * mentioned conditions. Hence assume |
| * "Interrupted Commit".) |
| */ |
| commit_time = be64_to_cpu( |
| ((struct commit_header *)bh->b_data)->h_commit_sec); |
| /* |
| * If need_check_commit_time is set, it means we are in |
| * PASS_SCAN and csum verify failed before. If |
| * commit_time is increasing, it's the same journal, |
| * otherwise it is stale journal block, just end this |
| * recovery. |
| */ |
| if (need_check_commit_time) { |
| if (commit_time >= last_trans_commit_time) { |
| pr_err("JBD2: Invalid checksum found in transaction %u\n", |
| next_commit_ID); |
| err = -EFSBADCRC; |
| goto failed; |
| } |
| ignore_crc_mismatch: |
| /* |
| * It likely does not belong to same journal, |
| * just end this recovery with success. |
| */ |
| jbd2_debug(1, "JBD2: Invalid checksum ignored in transaction %u, likely stale data\n", |
| next_commit_ID); |
| goto done; |
| } |
| |
| /* |
| * Found an expected commit block: if checksums |
| * are present, verify them in PASS_SCAN; else not |
| * much to do other than move on to the next sequence |
| * number. |
| */ |
| if (jbd2_has_feature_checksum(journal)) { |
| struct commit_header *cbh = |
| (struct commit_header *)bh->b_data; |
| unsigned found_chksum = |
| be32_to_cpu(cbh->h_chksum[0]); |
| |
| if (info->end_transaction) { |
| journal->j_failed_commit = |
| info->end_transaction; |
| break; |
| } |
| |
| /* Neither checksum match nor unused? */ |
| if (!((crc32_sum == found_chksum && |
| cbh->h_chksum_type == |
| JBD2_CRC32_CHKSUM && |
| cbh->h_chksum_size == |
| JBD2_CRC32_CHKSUM_SIZE) || |
| (cbh->h_chksum_type == 0 && |
| cbh->h_chksum_size == 0 && |
| found_chksum == 0))) |
| goto chksum_error; |
| |
| crc32_sum = ~0; |
| goto chksum_ok; |
| } |
| |
| if (jbd2_commit_block_csum_verify(journal, bh->b_data)) |
| goto chksum_ok; |
| |
| if (jbd2_commit_block_csum_verify_partial(journal, |
| bh->b_data)) { |
| pr_notice("JBD2: Find incomplete commit block in transaction %u block %lu\n", |
| next_commit_ID, next_log_block); |
| goto chksum_ok; |
| } |
| |
| chksum_error: |
| if (commit_time < last_trans_commit_time) |
| goto ignore_crc_mismatch; |
| info->end_transaction = next_commit_ID; |
| info->head_block = head_block; |
| |
| if (!jbd2_has_feature_async_commit(journal)) { |
| journal->j_failed_commit = next_commit_ID; |
| break; |
| } |
| |
| chksum_ok: |
| last_trans_commit_time = commit_time; |
| head_block = next_log_block; |
| next_commit_ID++; |
| continue; |
| |
| case JBD2_REVOKE_BLOCK: |
| /* |
| * Check revoke block crc in pass_scan, if csum verify |
| * failed, check commit block time later. |
| */ |
| if (pass == PASS_SCAN && |
| !jbd2_descriptor_block_csum_verify(journal, |
| bh->b_data)) { |
| jbd2_debug(1, "JBD2: invalid revoke block found in %lu\n", |
| next_log_block); |
| need_check_commit_time = true; |
| } |
| |
| /* If we aren't in the REVOKE pass, then we can |
| * just skip over this block. */ |
| if (pass != PASS_REVOKE) |
| continue; |
| |
| err = scan_revoke_records(journal, bh, |
| next_commit_ID, info); |
| if (err) |
| goto failed; |
| continue; |
| |
| default: |
| jbd2_debug(3, "Unrecognised magic %d, end of scan.\n", |
| blocktype); |
| goto done; |
| } |
| } |
| |
| done: |
| brelse(bh); |
| /* |
| * We broke out of the log scan loop: either we came to the |
| * known end of the log or we found an unexpected block in the |
| * log. If the latter happened, then we know that the "current" |
| * transaction marks the end of the valid log. |
| */ |
| |
| if (pass == PASS_SCAN) { |
| if (!info->end_transaction) |
| info->end_transaction = next_commit_ID; |
| if (!info->head_block) |
| info->head_block = head_block; |
| } else { |
| /* It's really bad news if different passes end up at |
| * different places (but possible due to IO errors). */ |
| if (info->end_transaction != next_commit_ID) { |
| printk(KERN_ERR "JBD2: recovery pass %d ended at " |
| "transaction %u, expected %u\n", |
| pass, next_commit_ID, info->end_transaction); |
| if (!success) |
| success = -EIO; |
| } |
| } |
| |
| if (jbd2_has_feature_fast_commit(journal) && pass != PASS_REVOKE) { |
| err = fc_do_one_pass(journal, info, pass); |
| if (err) |
| success = err; |
| } |
| |
| return success; |
| |
| failed: |
| brelse(bh); |
| return err; |
| } |
| |
| /* Scan a revoke record, marking all blocks mentioned as revoked. */ |
| |
| static int scan_revoke_records(journal_t *journal, struct buffer_head *bh, |
| tid_t sequence, struct recovery_info *info) |
| { |
| jbd2_journal_revoke_header_t *header; |
| int offset, max; |
| unsigned csum_size = 0; |
| __u32 rcount; |
| int record_len = 4; |
| |
| header = (jbd2_journal_revoke_header_t *) bh->b_data; |
| offset = sizeof(jbd2_journal_revoke_header_t); |
| rcount = be32_to_cpu(header->r_count); |
| |
| if (jbd2_journal_has_csum_v2or3(journal)) |
| csum_size = sizeof(struct jbd2_journal_block_tail); |
| if (rcount > journal->j_blocksize - csum_size) |
| return -EINVAL; |
| max = rcount; |
| |
| if (jbd2_has_feature_64bit(journal)) |
| record_len = 8; |
| |
| while (offset + record_len <= max) { |
| unsigned long long blocknr; |
| int err; |
| |
| if (record_len == 4) |
| blocknr = be32_to_cpu(* ((__be32 *) (bh->b_data+offset))); |
| else |
| blocknr = be64_to_cpu(* ((__be64 *) (bh->b_data+offset))); |
| offset += record_len; |
| err = jbd2_journal_set_revoke(journal, blocknr, sequence); |
| if (err) |
| return err; |
| ++info->nr_revokes; |
| } |
| return 0; |
| } |