| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/display/panel/samsung,ams495qa01.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: Samsung AMS495QA01 panel with Magnachip D53E6EA8966 controller |
| |
| maintainers: |
| - Chris Morgan <macromorgan@hotmail.com> |
| |
| allOf: |
| - $ref: panel-common.yaml# |
| - $ref: /schemas/spi/spi-peripheral-props.yaml# |
| |
| properties: |
| compatible: |
| const: samsung,ams495qa01 |
| |
| reg: |
| maxItems: 1 |
| |
| reset-gpios: |
| description: reset gpio, must be GPIO_ACTIVE_LOW |
| elvdd-supply: |
| description: regulator that supplies voltage to the panel display |
| enable-gpios: true |
| port: true |
| vdd-supply: |
| description: regulator that supplies voltage to panel logic |
| |
| required: |
| - compatible |
| - reg |
| - reset-gpios |
| - vdd-supply |
| |
| additionalProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/gpio/gpio.h> |
| spi { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| panel@0 { |
| compatible = "samsung,ams495qa01"; |
| reg = <0>; |
| reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>; |
| vdd-supply = <&vcc_3v3>; |
| |
| port { |
| mipi_in_panel: endpoint { |
| remote-endpoint = <&mipi_out_panel>; |
| }; |
| }; |
| }; |
| }; |
| |
| ... |
