| # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) |
| %YAML 1.2 |
| --- |
| $id: http://devicetree.org/schemas/dma/fsl-qdma.yaml# |
| $schema: http://devicetree.org/meta-schemas/core.yaml# |
| |
| title: NXP Layerscape SoC qDMA Controller |
| |
| maintainers: |
| - Frank Li <Frank.Li@nxp.com> |
| |
| properties: |
| compatible: |
| oneOf: |
| - const: fsl,ls1021a-qdma |
| - items: |
| - enum: |
| - fsl,ls1028a-qdma |
| - fsl,ls1043a-qdma |
| - fsl,ls1046a-qdma |
| - const: fsl,ls1021a-qdma |
| |
| reg: |
| items: |
| - description: Controller regs |
| - description: Status regs |
| - description: Block regs |
| |
| interrupts: |
| minItems: 2 |
| maxItems: 5 |
| |
| interrupt-names: |
| minItems: 2 |
| items: |
| - const: qdma-error |
| - const: qdma-queue0 |
| - const: qdma-queue1 |
| - const: qdma-queue2 |
| - const: qdma-queue3 |
| |
| dma-channels: |
| minimum: 1 |
| maximum: 64 |
| |
| fsl,dma-queues: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: Should contain number of queues supported. |
| minimum: 1 |
| maximum: 4 |
| |
| block-number: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: the virtual block number |
| |
| block-offset: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: the offset of different virtual block |
| |
| status-sizes: |
| $ref: /schemas/types.yaml#/definitions/uint32 |
| description: status queue size of per virtual block |
| |
| queue-sizes: |
| $ref: /schemas/types.yaml#/definitions/uint32-array |
| description: |
| command queue size of per virtual block, the size number |
| based on queues |
| |
| big-endian: |
| $ref: /schemas/types.yaml#/definitions/flag |
| description: |
| If present registers and hardware scatter/gather descriptors |
| of the qDMA are implemented in big endian mode, otherwise in little |
| mode. |
| |
| required: |
| - compatible |
| - reg |
| - interrupts |
| - interrupt-names |
| - fsl,dma-queues |
| - block-number |
| - block-offset |
| - status-sizes |
| - queue-sizes |
| |
| allOf: |
| - $ref: dma-controller.yaml# |
| - if: |
| properties: |
| compatible: |
| contains: |
| enum: |
| - fsl,ls1028a-qdma |
| - fsl,ls1043a-qdma |
| - fsl,ls1046a-qdma |
| then: |
| properties: |
| interrupts: |
| minItems: 5 |
| interrupt-names: |
| minItems: 5 |
| else: |
| properties: |
| interrupts: |
| maxItems: 3 |
| interrupt-names: |
| maxItems: 3 |
| |
| unevaluatedProperties: false |
| |
| examples: |
| - | |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| dma-controller@8390000 { |
| compatible = "fsl,ls1021a-qdma"; |
| reg = <0x8388000 0x1000>, /* Controller regs */ |
| <0x8389000 0x1000>, /* Status regs */ |
| <0x838a000 0x2000>; /* Block regs */ |
| interrupts = <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-names = "qdma-error", "qdma-queue0", "qdma-queue1"; |
| #dma-cells = <1>; |
| dma-channels = <8>; |
| block-number = <2>; |
| block-offset = <0x1000>; |
| status-sizes = <64>; |
| queue-sizes = <64 64>; |
| big-endian; |
| fsl,dma-queues = <2>; |
| }; |
| |