| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * the ISA Virtual Support Module of AMD CS5536 |
| * |
| * Copyright (C) 2007 Lemote, Inc. |
| * Author : jlliu, liujl@lemote.com |
| * |
| * Copyright (C) 2009 Lemote, Inc. |
| * Author: Wu Zhangjin, wuzhangjin@gmail.com |
| */ |
| |
| #include <linux/pci.h> |
| #include <cs5536/cs5536.h> |
| #include <cs5536/cs5536_pci.h> |
| |
| /* common variables for PCI_ISA_READ/WRITE_BAR */ |
| static const u32 divil_msr_reg[6] = { |
| DIVIL_MSR_REG(DIVIL_LBAR_SMB), DIVIL_MSR_REG(DIVIL_LBAR_GPIO), |
| DIVIL_MSR_REG(DIVIL_LBAR_MFGPT), DIVIL_MSR_REG(DIVIL_LBAR_IRQ), |
| DIVIL_MSR_REG(DIVIL_LBAR_PMS), DIVIL_MSR_REG(DIVIL_LBAR_ACPI), |
| }; |
| |
| static const u32 soft_bar_flag[6] = { |
| SOFT_BAR_SMB_FLAG, SOFT_BAR_GPIO_FLAG, SOFT_BAR_MFGPT_FLAG, |
| SOFT_BAR_IRQ_FLAG, SOFT_BAR_PMS_FLAG, SOFT_BAR_ACPI_FLAG, |
| }; |
| |
| static const u32 sb_msr_reg[6] = { |
| SB_MSR_REG(SB_R0), SB_MSR_REG(SB_R1), SB_MSR_REG(SB_R2), |
| SB_MSR_REG(SB_R3), SB_MSR_REG(SB_R4), SB_MSR_REG(SB_R5), |
| }; |
| |
| static const u32 bar_space_range[6] = { |
| CS5536_SMB_RANGE, CS5536_GPIO_RANGE, CS5536_MFGPT_RANGE, |
| CS5536_IRQ_RANGE, CS5536_PMS_RANGE, CS5536_ACPI_RANGE, |
| }; |
| |
| static const int bar_space_len[6] = { |
| CS5536_SMB_LENGTH, CS5536_GPIO_LENGTH, CS5536_MFGPT_LENGTH, |
| CS5536_IRQ_LENGTH, CS5536_PMS_LENGTH, CS5536_ACPI_LENGTH, |
| }; |
| |
| /* |
| * enable the divil module bar space. |
| * |
| * For all the DIVIL module LBAR, you should control the DIVIL LBAR reg |
| * and the RCONFx(0~5) reg to use the modules. |
| */ |
| static void divil_lbar_enable(void) |
| { |
| u32 hi, lo; |
| int offset; |
| |
| /* |
| * The DIVIL IRQ is not used yet. and make the RCONF0 reserved. |
| */ |
| |
| for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { |
| _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); |
| hi |= 0x01; |
| _wrmsr(DIVIL_MSR_REG(offset), hi, lo); |
| } |
| } |
| |
| /* |
| * disable the divil module bar space. |
| */ |
| static void divil_lbar_disable(void) |
| { |
| u32 hi, lo; |
| int offset; |
| |
| for (offset = DIVIL_LBAR_SMB; offset <= DIVIL_LBAR_PMS; offset++) { |
| _rdmsr(DIVIL_MSR_REG(offset), &hi, &lo); |
| hi &= ~0x01; |
| _wrmsr(DIVIL_MSR_REG(offset), hi, lo); |
| } |
| } |
| |
| /* |
| * BAR write: write value to the n BAR |
| */ |
| |
| void pci_isa_write_bar(int n, u32 value) |
| { |
| u32 hi = 0, lo = value; |
| |
| if (value == PCI_BAR_RANGE_MASK) { |
| _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); |
| lo |= soft_bar_flag[n]; |
| _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); |
| } else if (value & 0x01) { |
| /* NATIVE reg */ |
| hi = 0x0000f001; |
| lo &= bar_space_range[n]; |
| _wrmsr(divil_msr_reg[n], hi, lo); |
| |
| /* RCONFx is 4bytes in units for I/O space */ |
| hi = ((value & 0x000ffffc) << 12) | |
| ((bar_space_len[n] - 4) << 12) | 0x01; |
| lo = ((value & 0x000ffffc) << 12) | 0x01; |
| _wrmsr(sb_msr_reg[n], hi, lo); |
| } |
| } |
| |
| /* |
| * BAR read: read the n BAR |
| */ |
| |
| u32 pci_isa_read_bar(int n) |
| { |
| u32 conf_data = 0; |
| u32 hi, lo; |
| |
| _rdmsr(GLCP_MSR_REG(GLCP_SOFT_COM), &hi, &lo); |
| if (lo & soft_bar_flag[n]) { |
| conf_data = bar_space_range[n] | PCI_BASE_ADDRESS_SPACE_IO; |
| lo &= ~soft_bar_flag[n]; |
| _wrmsr(GLCP_MSR_REG(GLCP_SOFT_COM), hi, lo); |
| } else { |
| _rdmsr(divil_msr_reg[n], &hi, &lo); |
| conf_data = lo & bar_space_range[n]; |
| conf_data |= 0x01; |
| conf_data &= ~0x02; |
| } |
| return conf_data; |
| } |
| |
| /* |
| * isa_write: ISA write transfer |
| * |
| * We assume that this is not a bus master transfer. |
| */ |
| void pci_isa_write_reg(int reg, u32 value) |
| { |
| u32 hi = 0, lo = value; |
| u32 temp; |
| |
| switch (reg) { |
| case PCI_COMMAND: |
| if (value & PCI_COMMAND_IO) |
| divil_lbar_enable(); |
| else |
| divil_lbar_disable(); |
| break; |
| case PCI_STATUS: |
| _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); |
| temp = lo & 0x0000ffff; |
| if ((value & PCI_STATUS_SIG_TARGET_ABORT) && |
| (lo & SB_TAS_ERR_EN)) |
| temp |= SB_TAS_ERR_FLAG; |
| |
| if ((value & PCI_STATUS_REC_TARGET_ABORT) && |
| (lo & SB_TAR_ERR_EN)) |
| temp |= SB_TAR_ERR_FLAG; |
| |
| if ((value & PCI_STATUS_REC_MASTER_ABORT) |
| && (lo & SB_MAR_ERR_EN)) |
| temp |= SB_MAR_ERR_FLAG; |
| |
| if ((value & PCI_STATUS_DETECTED_PARITY) |
| && (lo & SB_PARE_ERR_EN)) |
| temp |= SB_PARE_ERR_FLAG; |
| |
| lo = temp; |
| _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); |
| break; |
| case PCI_CACHE_LINE_SIZE: |
| value &= 0x0000ff00; |
| _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); |
| hi &= 0xffffff00; |
| hi |= (value >> 8); |
| _wrmsr(SB_MSR_REG(SB_CTRL), hi, lo); |
| break; |
| case PCI_BAR0_REG: |
| pci_isa_write_bar(0, value); |
| break; |
| case PCI_BAR1_REG: |
| pci_isa_write_bar(1, value); |
| break; |
| case PCI_BAR2_REG: |
| pci_isa_write_bar(2, value); |
| break; |
| case PCI_BAR3_REG: |
| pci_isa_write_bar(3, value); |
| break; |
| case PCI_BAR4_REG: |
| pci_isa_write_bar(4, value); |
| break; |
| case PCI_BAR5_REG: |
| pci_isa_write_bar(5, value); |
| break; |
| case PCI_UART1_INT_REG: |
| _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); |
| /* disable uart1 interrupt in PIC */ |
| lo &= ~(0xf << 24); |
| if (value) /* enable uart1 interrupt in PIC */ |
| lo |= (CS5536_UART1_INTR << 24); |
| _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); |
| break; |
| case PCI_UART2_INT_REG: |
| _rdmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), &hi, &lo); |
| /* disable uart2 interrupt in PIC */ |
| lo &= ~(0xf << 28); |
| if (value) /* enable uart2 interrupt in PIC */ |
| lo |= (CS5536_UART2_INTR << 28); |
| _wrmsr(DIVIL_MSR_REG(PIC_YSEL_HIGH), hi, lo); |
| break; |
| case PCI_ISA_FIXUP_REG: |
| if (value) { |
| /* enable the TARGET ABORT/MASTER ABORT etc. */ |
| _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); |
| lo |= 0x00000063; |
| _wrmsr(SB_MSR_REG(SB_ERROR), hi, lo); |
| } |
| break; |
| default: |
| /* ALL OTHER PCI CONFIG SPACE HEADER IS NOT IMPLEMENTED. */ |
| break; |
| } |
| } |
| |
| /* |
| * isa_read: ISA read transfers |
| * |
| * We assume that this is not a bus master transfer. |
| */ |
| u32 pci_isa_read_reg(int reg) |
| { |
| u32 conf_data = 0; |
| u32 hi, lo; |
| |
| switch (reg) { |
| case PCI_VENDOR_ID: |
| conf_data = |
| CFG_PCI_VENDOR_ID(CS5536_ISA_DEVICE_ID, CS5536_VENDOR_ID); |
| break; |
| case PCI_COMMAND: |
| /* we just check the first LBAR for the IO enable bit, */ |
| /* maybe we should changed later. */ |
| _rdmsr(DIVIL_MSR_REG(DIVIL_LBAR_SMB), &hi, &lo); |
| if (hi & 0x01) |
| conf_data |= PCI_COMMAND_IO; |
| break; |
| case PCI_STATUS: |
| conf_data |= PCI_STATUS_66MHZ; |
| conf_data |= PCI_STATUS_DEVSEL_MEDIUM; |
| conf_data |= PCI_STATUS_FAST_BACK; |
| |
| _rdmsr(SB_MSR_REG(SB_ERROR), &hi, &lo); |
| if (lo & SB_TAS_ERR_FLAG) |
| conf_data |= PCI_STATUS_SIG_TARGET_ABORT; |
| if (lo & SB_TAR_ERR_FLAG) |
| conf_data |= PCI_STATUS_REC_TARGET_ABORT; |
| if (lo & SB_MAR_ERR_FLAG) |
| conf_data |= PCI_STATUS_REC_MASTER_ABORT; |
| if (lo & SB_PARE_ERR_FLAG) |
| conf_data |= PCI_STATUS_DETECTED_PARITY; |
| break; |
| case PCI_CLASS_REVISION: |
| _rdmsr(GLCP_MSR_REG(GLCP_CHIP_REV_ID), &hi, &lo); |
| conf_data = lo & 0x000000ff; |
| conf_data |= (CS5536_ISA_CLASS_CODE << 8); |
| break; |
| case PCI_CACHE_LINE_SIZE: |
| _rdmsr(SB_MSR_REG(SB_CTRL), &hi, &lo); |
| hi &= 0x000000f8; |
| conf_data = CFG_PCI_CACHE_LINE_SIZE(PCI_BRIDGE_HEADER_TYPE, hi); |
| break; |
| /* |
| * we only use the LBAR of DIVIL, no RCONF used. |
| * all of them are IO space. |
| */ |
| case PCI_BAR0_REG: |
| return pci_isa_read_bar(0); |
| break; |
| case PCI_BAR1_REG: |
| return pci_isa_read_bar(1); |
| break; |
| case PCI_BAR2_REG: |
| return pci_isa_read_bar(2); |
| break; |
| case PCI_BAR3_REG: |
| break; |
| case PCI_BAR4_REG: |
| return pci_isa_read_bar(4); |
| break; |
| case PCI_BAR5_REG: |
| return pci_isa_read_bar(5); |
| break; |
| case PCI_CARDBUS_CIS: |
| conf_data = PCI_CARDBUS_CIS_POINTER; |
| break; |
| case PCI_SUBSYSTEM_VENDOR_ID: |
| conf_data = |
| CFG_PCI_VENDOR_ID(CS5536_ISA_SUB_ID, CS5536_SUB_VENDOR_ID); |
| break; |
| case PCI_ROM_ADDRESS: |
| conf_data = PCI_EXPANSION_ROM_BAR; |
| break; |
| case PCI_CAPABILITY_LIST: |
| conf_data = PCI_CAPLIST_POINTER; |
| break; |
| case PCI_INTERRUPT_LINE: |
| /* no interrupt used here */ |
| conf_data = CFG_PCI_INTERRUPT_LINE(0x00, 0x00); |
| break; |
| default: |
| break; |
| } |
| |
| return conf_data; |
| } |
| |
| /* |
| * The mfgpt timer interrupt is running early, so we must keep the south bridge |
| * mmio always enabled. Otherwise we may race with the PCI configuration which |
| * may temporarily disable it. When that happens and the timer interrupt fires, |
| * we are not able to clear it and the system will hang. |
| */ |
| static void cs5536_isa_mmio_always_on(struct pci_dev *dev) |
| { |
| dev->mmio_always_on = 1; |
| } |
| DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_CS5536_ISA, |
| PCI_CLASS_BRIDGE_ISA, 8, cs5536_isa_mmio_always_on); |