| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Firmware-Assisted Dump support on POWER platform (OPAL). |
| * |
| * Copyright 2019, Hari Bathini, IBM Corporation. |
| */ |
| |
| #define pr_fmt(fmt) "opal fadump: " fmt |
| |
| #include <linux/string.h> |
| #include <linux/seq_file.h> |
| #include <linux/of.h> |
| #include <linux/of_fdt.h> |
| #include <linux/libfdt.h> |
| #include <linux/mm.h> |
| #include <linux/crash_dump.h> |
| |
| #include <asm/page.h> |
| #include <asm/opal.h> |
| #include <asm/fadump-internal.h> |
| |
| #include "opal-fadump.h" |
| |
| |
| #ifdef CONFIG_PRESERVE_FA_DUMP |
| /* |
| * When dump is active but PRESERVE_FA_DUMP is enabled on the kernel, |
| * ensure crash data is preserved in hope that the subsequent memory |
| * preserving kernel boot is going to process this crash data. |
| */ |
| void __init opal_fadump_dt_scan(struct fw_dump *fadump_conf, u64 node) |
| { |
| const struct opal_fadump_mem_struct *opal_fdm_active; |
| const __be32 *prop; |
| unsigned long dn; |
| u64 addr = 0; |
| s64 ret; |
| |
| dn = of_get_flat_dt_subnode_by_name(node, "dump"); |
| if (dn == -FDT_ERR_NOTFOUND) |
| return; |
| |
| /* |
| * Check if dump has been initiated on last reboot. |
| */ |
| prop = of_get_flat_dt_prop(dn, "mpipl-boot", NULL); |
| if (!prop) |
| return; |
| |
| ret = opal_mpipl_query_tag(OPAL_MPIPL_TAG_KERNEL, &addr); |
| if ((ret != OPAL_SUCCESS) || !addr) { |
| pr_debug("Could not get Kernel metadata (%lld)\n", ret); |
| return; |
| } |
| |
| /* |
| * Preserve memory only if kernel memory regions are registered |
| * with f/w for MPIPL. |
| */ |
| addr = be64_to_cpu(addr); |
| pr_debug("Kernel metadata addr: %llx\n", addr); |
| opal_fdm_active = (void *)addr; |
| if (be16_to_cpu(opal_fdm_active->registered_regions) == 0) |
| return; |
| |
| ret = opal_mpipl_query_tag(OPAL_MPIPL_TAG_BOOT_MEM, &addr); |
| if ((ret != OPAL_SUCCESS) || !addr) { |
| pr_err("Failed to get boot memory tag (%lld)\n", ret); |
| return; |
| } |
| |
| /* |
| * Memory below this address can be used for booting a |
| * capture kernel or petitboot kernel. Preserve everything |
| * above this address for processing crashdump. |
| */ |
| fadump_conf->boot_mem_top = be64_to_cpu(addr); |
| pr_debug("Preserve everything above %llx\n", fadump_conf->boot_mem_top); |
| |
| pr_info("Firmware-assisted dump is active.\n"); |
| fadump_conf->dump_active = 1; |
| } |
| |
| #else /* CONFIG_PRESERVE_FA_DUMP */ |
| static const struct opal_fadump_mem_struct *opal_fdm_active; |
| static const struct opal_mpipl_fadump *opal_cpu_metadata; |
| static struct opal_fadump_mem_struct *opal_fdm; |
| |
| #ifdef CONFIG_OPAL_CORE |
| extern bool kernel_initiated; |
| #endif |
| |
| static int opal_fadump_unregister(struct fw_dump *fadump_conf); |
| |
| static void opal_fadump_update_config(struct fw_dump *fadump_conf, |
| const struct opal_fadump_mem_struct *fdm) |
| { |
| pr_debug("Boot memory regions count: %d\n", be16_to_cpu(fdm->region_cnt)); |
| |
| /* |
| * The destination address of the first boot memory region is the |
| * destination address of boot memory regions. |
| */ |
| fadump_conf->boot_mem_dest_addr = be64_to_cpu(fdm->rgn[0].dest); |
| pr_debug("Destination address of boot memory regions: %#016llx\n", |
| fadump_conf->boot_mem_dest_addr); |
| |
| fadump_conf->fadumphdr_addr = be64_to_cpu(fdm->fadumphdr_addr); |
| } |
| |
| /* |
| * This function is called in the capture kernel to get configuration details |
| * from metadata setup by the first kernel. |
| */ |
| static void __init opal_fadump_get_config(struct fw_dump *fadump_conf, |
| const struct opal_fadump_mem_struct *fdm) |
| { |
| unsigned long base, size, last_end, hole_size; |
| int i; |
| |
| if (!fadump_conf->dump_active) |
| return; |
| |
| last_end = 0; |
| hole_size = 0; |
| fadump_conf->boot_memory_size = 0; |
| |
| pr_debug("Boot memory regions:\n"); |
| for (i = 0; i < be16_to_cpu(fdm->region_cnt); i++) { |
| base = be64_to_cpu(fdm->rgn[i].src); |
| size = be64_to_cpu(fdm->rgn[i].size); |
| pr_debug("\t[%03d] base: 0x%lx, size: 0x%lx\n", i, base, size); |
| |
| fadump_conf->boot_mem_addr[i] = base; |
| fadump_conf->boot_mem_sz[i] = size; |
| fadump_conf->boot_memory_size += size; |
| hole_size += (base - last_end); |
| |
| last_end = base + size; |
| } |
| |
| /* |
| * Start address of reserve dump area (permanent reservation) for |
| * re-registering FADump after dump capture. |
| */ |
| fadump_conf->reserve_dump_area_start = be64_to_cpu(fdm->rgn[0].dest); |
| |
| /* |
| * Rarely, but it can so happen that system crashes before all |
| * boot memory regions are registered for MPIPL. In such |
| * cases, warn that the vmcore may not be accurate and proceed |
| * anyway as that is the best bet considering free pages, cache |
| * pages, user pages, etc are usually filtered out. |
| * |
| * Hope the memory that could not be preserved only has pages |
| * that are usually filtered out while saving the vmcore. |
| */ |
| if (be16_to_cpu(fdm->region_cnt) > be16_to_cpu(fdm->registered_regions)) { |
| pr_warn("Not all memory regions were saved!!!\n"); |
| pr_warn(" Unsaved memory regions:\n"); |
| i = be16_to_cpu(fdm->registered_regions); |
| while (i < be16_to_cpu(fdm->region_cnt)) { |
| pr_warn("\t[%03d] base: 0x%llx, size: 0x%llx\n", |
| i, be64_to_cpu(fdm->rgn[i].src), |
| be64_to_cpu(fdm->rgn[i].size)); |
| i++; |
| } |
| |
| pr_warn("If the unsaved regions only contain pages that are filtered out (eg. free/user pages), the vmcore should still be usable.\n"); |
| pr_warn("WARNING: If the unsaved regions contain kernel pages, the vmcore will be corrupted.\n"); |
| } |
| |
| fadump_conf->boot_mem_top = (fadump_conf->boot_memory_size + hole_size); |
| fadump_conf->boot_mem_regs_cnt = be16_to_cpu(fdm->region_cnt); |
| opal_fadump_update_config(fadump_conf, fdm); |
| } |
| |
| /* Initialize kernel metadata */ |
| static void opal_fadump_init_metadata(struct opal_fadump_mem_struct *fdm) |
| { |
| fdm->version = OPAL_FADUMP_VERSION; |
| fdm->region_cnt = cpu_to_be16(0); |
| fdm->registered_regions = cpu_to_be16(0); |
| fdm->fadumphdr_addr = cpu_to_be64(0); |
| } |
| |
| static u64 opal_fadump_init_mem_struct(struct fw_dump *fadump_conf) |
| { |
| u64 addr = fadump_conf->reserve_dump_area_start; |
| u16 reg_cnt; |
| int i; |
| |
| opal_fdm = __va(fadump_conf->kernel_metadata); |
| opal_fadump_init_metadata(opal_fdm); |
| |
| /* Boot memory regions */ |
| reg_cnt = be16_to_cpu(opal_fdm->region_cnt); |
| for (i = 0; i < fadump_conf->boot_mem_regs_cnt; i++) { |
| opal_fdm->rgn[i].src = cpu_to_be64(fadump_conf->boot_mem_addr[i]); |
| opal_fdm->rgn[i].dest = cpu_to_be64(addr); |
| opal_fdm->rgn[i].size = cpu_to_be64(fadump_conf->boot_mem_sz[i]); |
| |
| reg_cnt++; |
| addr += fadump_conf->boot_mem_sz[i]; |
| } |
| opal_fdm->region_cnt = cpu_to_be16(reg_cnt); |
| |
| /* |
| * Kernel metadata is passed to f/w and retrieved in capture kernel. |
| * So, use it to save fadump header address instead of calculating it. |
| */ |
| opal_fdm->fadumphdr_addr = cpu_to_be64(be64_to_cpu(opal_fdm->rgn[0].dest) + |
| fadump_conf->boot_memory_size); |
| |
| opal_fadump_update_config(fadump_conf, opal_fdm); |
| |
| return addr; |
| } |
| |
| static u64 opal_fadump_get_metadata_size(void) |
| { |
| return PAGE_ALIGN(sizeof(struct opal_fadump_mem_struct)); |
| } |
| |
| static int opal_fadump_setup_metadata(struct fw_dump *fadump_conf) |
| { |
| int err = 0; |
| s64 ret; |
| |
| /* |
| * Use the last page(s) in FADump memory reservation for |
| * kernel metadata. |
| */ |
| fadump_conf->kernel_metadata = (fadump_conf->reserve_dump_area_start + |
| fadump_conf->reserve_dump_area_size - |
| opal_fadump_get_metadata_size()); |
| pr_info("Kernel metadata addr: %llx\n", fadump_conf->kernel_metadata); |
| |
| /* Initialize kernel metadata before registering the address with f/w */ |
| opal_fdm = __va(fadump_conf->kernel_metadata); |
| opal_fadump_init_metadata(opal_fdm); |
| |
| /* |
| * Register metadata address with f/w. Can be retrieved in |
| * the capture kernel. |
| */ |
| ret = opal_mpipl_register_tag(OPAL_MPIPL_TAG_KERNEL, |
| fadump_conf->kernel_metadata); |
| if (ret != OPAL_SUCCESS) { |
| pr_err("Failed to set kernel metadata tag!\n"); |
| err = -EPERM; |
| } |
| |
| /* |
| * Register boot memory top address with f/w. Should be retrieved |
| * by a kernel that intends to preserve crash'ed kernel's memory. |
| */ |
| ret = opal_mpipl_register_tag(OPAL_MPIPL_TAG_BOOT_MEM, |
| fadump_conf->boot_mem_top); |
| if (ret != OPAL_SUCCESS) { |
| pr_err("Failed to set boot memory tag!\n"); |
| err = -EPERM; |
| } |
| |
| return err; |
| } |
| |
| static u64 opal_fadump_get_bootmem_min(void) |
| { |
| return OPAL_FADUMP_MIN_BOOT_MEM; |
| } |
| |
| static int opal_fadump_register(struct fw_dump *fadump_conf) |
| { |
| s64 rc = OPAL_PARAMETER; |
| u16 registered_regs; |
| int i, err = -EIO; |
| |
| registered_regs = be16_to_cpu(opal_fdm->registered_regions); |
| for (i = 0; i < be16_to_cpu(opal_fdm->region_cnt); i++) { |
| rc = opal_mpipl_update(OPAL_MPIPL_ADD_RANGE, |
| be64_to_cpu(opal_fdm->rgn[i].src), |
| be64_to_cpu(opal_fdm->rgn[i].dest), |
| be64_to_cpu(opal_fdm->rgn[i].size)); |
| if (rc != OPAL_SUCCESS) |
| break; |
| |
| registered_regs++; |
| } |
| opal_fdm->registered_regions = cpu_to_be16(registered_regs); |
| |
| switch (rc) { |
| case OPAL_SUCCESS: |
| pr_info("Registration is successful!\n"); |
| fadump_conf->dump_registered = 1; |
| err = 0; |
| break; |
| case OPAL_RESOURCE: |
| /* If MAX regions limit in f/w is hit, warn and proceed. */ |
| pr_warn("%d regions could not be registered for MPIPL as MAX limit is reached!\n", |
| (be16_to_cpu(opal_fdm->region_cnt) - |
| be16_to_cpu(opal_fdm->registered_regions))); |
| fadump_conf->dump_registered = 1; |
| err = 0; |
| break; |
| case OPAL_PARAMETER: |
| pr_err("Failed to register. Parameter Error(%lld).\n", rc); |
| break; |
| case OPAL_HARDWARE: |
| pr_err("Support not available.\n"); |
| fadump_conf->fadump_supported = 0; |
| fadump_conf->fadump_enabled = 0; |
| break; |
| default: |
| pr_err("Failed to register. Unknown Error(%lld).\n", rc); |
| break; |
| } |
| |
| /* |
| * If some regions were registered before OPAL_MPIPL_ADD_RANGE |
| * OPAL call failed, unregister all regions. |
| */ |
| if ((err < 0) && (be16_to_cpu(opal_fdm->registered_regions) > 0)) |
| opal_fadump_unregister(fadump_conf); |
| |
| return err; |
| } |
| |
| static int opal_fadump_unregister(struct fw_dump *fadump_conf) |
| { |
| s64 rc; |
| |
| rc = opal_mpipl_update(OPAL_MPIPL_REMOVE_ALL, 0, 0, 0); |
| if (rc) { |
| pr_err("Failed to un-register - unexpected Error(%lld).\n", rc); |
| return -EIO; |
| } |
| |
| opal_fdm->registered_regions = cpu_to_be16(0); |
| fadump_conf->dump_registered = 0; |
| return 0; |
| } |
| |
| static int opal_fadump_invalidate(struct fw_dump *fadump_conf) |
| { |
| s64 rc; |
| |
| rc = opal_mpipl_update(OPAL_MPIPL_FREE_PRESERVED_MEMORY, 0, 0, 0); |
| if (rc) { |
| pr_err("Failed to invalidate - unexpected Error(%lld).\n", rc); |
| return -EIO; |
| } |
| |
| fadump_conf->dump_active = 0; |
| opal_fdm_active = NULL; |
| return 0; |
| } |
| |
| static void opal_fadump_cleanup(struct fw_dump *fadump_conf) |
| { |
| s64 ret; |
| |
| ret = opal_mpipl_register_tag(OPAL_MPIPL_TAG_KERNEL, 0); |
| if (ret != OPAL_SUCCESS) |
| pr_warn("Could not reset (%llu) kernel metadata tag!\n", ret); |
| } |
| |
| /* |
| * Verify if CPU state data is available. If available, do a bit of sanity |
| * checking before processing this data. |
| */ |
| static bool __init is_opal_fadump_cpu_data_valid(struct fw_dump *fadump_conf) |
| { |
| if (!opal_cpu_metadata) |
| return false; |
| |
| fadump_conf->cpu_state_data_version = |
| be32_to_cpu(opal_cpu_metadata->cpu_data_version); |
| fadump_conf->cpu_state_entry_size = |
| be32_to_cpu(opal_cpu_metadata->cpu_data_size); |
| fadump_conf->cpu_state_dest_vaddr = |
| (u64)__va(be64_to_cpu(opal_cpu_metadata->region[0].dest)); |
| fadump_conf->cpu_state_data_size = |
| be64_to_cpu(opal_cpu_metadata->region[0].size); |
| |
| if (fadump_conf->cpu_state_data_version != HDAT_FADUMP_CPU_DATA_VER) { |
| pr_warn("Supported CPU state data version: %u, found: %d!\n", |
| HDAT_FADUMP_CPU_DATA_VER, |
| fadump_conf->cpu_state_data_version); |
| pr_warn("WARNING: F/W using newer CPU state data format!!\n"); |
| } |
| |
| if ((fadump_conf->cpu_state_dest_vaddr == 0) || |
| (fadump_conf->cpu_state_entry_size == 0) || |
| (fadump_conf->cpu_state_entry_size > |
| fadump_conf->cpu_state_data_size)) { |
| pr_err("CPU state data is invalid. Ignoring!\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| /* |
| * Convert CPU state data saved at the time of crash into ELF notes. |
| * |
| * While the crashing CPU's register data is saved by the kernel, CPU state |
| * data for all CPUs is saved by f/w. In CPU state data provided by f/w, |
| * each register entry is of 16 bytes, a numerical identifier along with |
| * a GPR/SPR flag in the first 8 bytes and the register value in the next |
| * 8 bytes. For more details refer to F/W documentation. If this data is |
| * missing or in unsupported format, append crashing CPU's register data |
| * saved by the kernel in the PT_NOTE, to have something to work with in |
| * the vmcore file. |
| */ |
| static int __init |
| opal_fadump_build_cpu_notes(struct fw_dump *fadump_conf, |
| struct fadump_crash_info_header *fdh) |
| { |
| u32 thread_pir, size_per_thread, regs_offset, regs_cnt, reg_esize; |
| struct hdat_fadump_thread_hdr *thdr; |
| bool is_cpu_data_valid = false; |
| u32 num_cpus = 1, *note_buf; |
| struct pt_regs regs; |
| char *bufp; |
| int rc, i; |
| |
| if (is_opal_fadump_cpu_data_valid(fadump_conf)) { |
| size_per_thread = fadump_conf->cpu_state_entry_size; |
| num_cpus = (fadump_conf->cpu_state_data_size / size_per_thread); |
| bufp = __va(fadump_conf->cpu_state_dest_vaddr); |
| is_cpu_data_valid = true; |
| } |
| |
| rc = fadump_setup_cpu_notes_buf(num_cpus); |
| if (rc != 0) |
| return rc; |
| |
| note_buf = (u32 *)fadump_conf->cpu_notes_buf_vaddr; |
| if (!is_cpu_data_valid) |
| goto out; |
| |
| /* |
| * Offset for register entries, entry size and registers count is |
| * duplicated in every thread header in keeping with HDAT format. |
| * Use these values from the first thread header. |
| */ |
| thdr = (struct hdat_fadump_thread_hdr *)bufp; |
| regs_offset = (offsetof(struct hdat_fadump_thread_hdr, offset) + |
| be32_to_cpu(thdr->offset)); |
| reg_esize = be32_to_cpu(thdr->esize); |
| regs_cnt = be32_to_cpu(thdr->ecnt); |
| |
| pr_debug("--------CPU State Data------------\n"); |
| pr_debug("NumCpus : %u\n", num_cpus); |
| pr_debug("\tOffset: %u, Entry size: %u, Cnt: %u\n", |
| regs_offset, reg_esize, regs_cnt); |
| |
| for (i = 0; i < num_cpus; i++, bufp += size_per_thread) { |
| thdr = (struct hdat_fadump_thread_hdr *)bufp; |
| |
| thread_pir = be32_to_cpu(thdr->pir); |
| pr_debug("[%04d] PIR: 0x%x, core state: 0x%02x\n", |
| i, thread_pir, thdr->core_state); |
| |
| /* |
| * If this is kernel initiated crash, crashing_cpu would be set |
| * appropriately and register data of the crashing CPU saved by |
| * crashing kernel. Add this saved register data of crashing CPU |
| * to elf notes and populate the pt_regs for the remaining CPUs |
| * from register state data provided by firmware. |
| */ |
| if (fdh->crashing_cpu == thread_pir) { |
| note_buf = fadump_regs_to_elf_notes(note_buf, |
| &fdh->regs); |
| pr_debug("Crashing CPU PIR: 0x%x - R1 : 0x%lx, NIP : 0x%lx\n", |
| fdh->crashing_cpu, fdh->regs.gpr[1], |
| fdh->regs.nip); |
| continue; |
| } |
| |
| /* |
| * Register state data of MAX cores is provided by firmware, |
| * but some of this cores may not be active. So, while |
| * processing register state data, check core state and |
| * skip threads that belong to inactive cores. |
| */ |
| if (thdr->core_state == HDAT_FADUMP_CORE_INACTIVE) |
| continue; |
| |
| opal_fadump_read_regs((bufp + regs_offset), regs_cnt, |
| reg_esize, true, ®s); |
| note_buf = fadump_regs_to_elf_notes(note_buf, ®s); |
| pr_debug("CPU PIR: 0x%x - R1 : 0x%lx, NIP : 0x%lx\n", |
| thread_pir, regs.gpr[1], regs.nip); |
| } |
| |
| out: |
| /* |
| * CPU state data is invalid/unsupported. Try appending crashing CPU's |
| * register data, if it is saved by the kernel. |
| */ |
| if (fadump_conf->cpu_notes_buf_vaddr == (u64)note_buf) { |
| if (fdh->crashing_cpu == FADUMP_CPU_UNKNOWN) { |
| fadump_free_cpu_notes_buf(); |
| return -ENODEV; |
| } |
| |
| pr_warn("WARNING: appending only crashing CPU's register data\n"); |
| note_buf = fadump_regs_to_elf_notes(note_buf, &(fdh->regs)); |
| } |
| |
| final_note(note_buf); |
| |
| pr_debug("Updating elfcore header (%llx) with cpu notes\n", |
| fadump_conf->elfcorehdr_addr); |
| fadump_update_elfcore_header((char *)fadump_conf->elfcorehdr_addr); |
| return 0; |
| } |
| |
| static int __init opal_fadump_process(struct fw_dump *fadump_conf) |
| { |
| struct fadump_crash_info_header *fdh; |
| int rc = -EINVAL; |
| |
| if (!opal_fdm_active || !fadump_conf->fadumphdr_addr) |
| return rc; |
| |
| fdh = __va(fadump_conf->fadumphdr_addr); |
| |
| #ifdef CONFIG_OPAL_CORE |
| /* |
| * If this is a kernel initiated crash, crashing_cpu would be set |
| * appropriately and register data of the crashing CPU saved by |
| * crashing kernel. Add this saved register data of crashing CPU |
| * to elf notes and populate the pt_regs for the remaining CPUs |
| * from register state data provided by firmware. |
| */ |
| if (fdh->crashing_cpu != FADUMP_CPU_UNKNOWN) |
| kernel_initiated = true; |
| #endif |
| |
| return opal_fadump_build_cpu_notes(fadump_conf, fdh); |
| } |
| |
| static void opal_fadump_region_show(struct fw_dump *fadump_conf, |
| struct seq_file *m) |
| { |
| const struct opal_fadump_mem_struct *fdm_ptr; |
| u64 dumped_bytes = 0; |
| int i; |
| |
| if (fadump_conf->dump_active) |
| fdm_ptr = opal_fdm_active; |
| else |
| fdm_ptr = opal_fdm; |
| |
| for (i = 0; i < be16_to_cpu(fdm_ptr->region_cnt); i++) { |
| /* |
| * Only regions that are registered for MPIPL |
| * would have dump data. |
| */ |
| if ((fadump_conf->dump_active) && |
| (i < be16_to_cpu(fdm_ptr->registered_regions))) |
| dumped_bytes = be64_to_cpu(fdm_ptr->rgn[i].size); |
| |
| seq_printf(m, "DUMP: Src: %#016llx, Dest: %#016llx, ", |
| be64_to_cpu(fdm_ptr->rgn[i].src), |
| be64_to_cpu(fdm_ptr->rgn[i].dest)); |
| seq_printf(m, "Size: %#llx, Dumped: %#llx bytes\n", |
| be64_to_cpu(fdm_ptr->rgn[i].size), dumped_bytes); |
| } |
| |
| /* Dump is active. Show preserved area start address. */ |
| if (fadump_conf->dump_active) { |
| seq_printf(m, "\nMemory above %#016llx is reserved for saving crash dump\n", |
| fadump_conf->boot_mem_top); |
| } |
| } |
| |
| static void opal_fadump_trigger(struct fadump_crash_info_header *fdh, |
| const char *msg) |
| { |
| int rc; |
| |
| /* |
| * Unlike on pSeries platform, logical CPU number is not provided |
| * with architected register state data. So, store the crashing |
| * CPU's PIR instead to plug the appropriate register data for |
| * crashing CPU in the vmcore file. |
| */ |
| fdh->crashing_cpu = (u32)mfspr(SPRN_PIR); |
| |
| rc = opal_cec_reboot2(OPAL_REBOOT_MPIPL, msg); |
| if (rc == OPAL_UNSUPPORTED) { |
| pr_emerg("Reboot type %d not supported.\n", |
| OPAL_REBOOT_MPIPL); |
| } else if (rc == OPAL_HARDWARE) |
| pr_emerg("No backend support for MPIPL!\n"); |
| } |
| |
| /* FADUMP_MAX_MEM_REGS or lower */ |
| static int opal_fadump_max_boot_mem_rgns(void) |
| { |
| return FADUMP_MAX_MEM_REGS; |
| } |
| |
| static struct fadump_ops opal_fadump_ops = { |
| .fadump_init_mem_struct = opal_fadump_init_mem_struct, |
| .fadump_get_metadata_size = opal_fadump_get_metadata_size, |
| .fadump_setup_metadata = opal_fadump_setup_metadata, |
| .fadump_get_bootmem_min = opal_fadump_get_bootmem_min, |
| .fadump_register = opal_fadump_register, |
| .fadump_unregister = opal_fadump_unregister, |
| .fadump_invalidate = opal_fadump_invalidate, |
| .fadump_cleanup = opal_fadump_cleanup, |
| .fadump_process = opal_fadump_process, |
| .fadump_region_show = opal_fadump_region_show, |
| .fadump_trigger = opal_fadump_trigger, |
| .fadump_max_boot_mem_rgns = opal_fadump_max_boot_mem_rgns, |
| }; |
| |
| void __init opal_fadump_dt_scan(struct fw_dump *fadump_conf, u64 node) |
| { |
| const __be32 *prop; |
| unsigned long dn; |
| __be64 be_addr; |
| u64 addr = 0; |
| int i, len; |
| s64 ret; |
| |
| /* |
| * Check if Firmware-Assisted Dump is supported. if yes, check |
| * if dump has been initiated on last reboot. |
| */ |
| dn = of_get_flat_dt_subnode_by_name(node, "dump"); |
| if (dn == -FDT_ERR_NOTFOUND) { |
| pr_debug("FADump support is missing!\n"); |
| return; |
| } |
| |
| if (!of_flat_dt_is_compatible(dn, "ibm,opal-dump")) { |
| pr_err("Support missing for this f/w version!\n"); |
| return; |
| } |
| |
| prop = of_get_flat_dt_prop(dn, "fw-load-area", &len); |
| if (prop) { |
| /* |
| * Each f/w load area is an (address,size) pair, |
| * 2 cells each, totalling 4 cells per range. |
| */ |
| for (i = 0; i < len / (sizeof(*prop) * 4); i++) { |
| u64 base, end; |
| |
| base = of_read_number(prop + (i * 4) + 0, 2); |
| end = base; |
| end += of_read_number(prop + (i * 4) + 2, 2); |
| if (end > OPAL_FADUMP_MIN_BOOT_MEM) { |
| pr_err("F/W load area: 0x%llx-0x%llx\n", |
| base, end); |
| pr_err("F/W version not supported!\n"); |
| return; |
| } |
| } |
| } |
| |
| fadump_conf->ops = &opal_fadump_ops; |
| fadump_conf->fadump_supported = 1; |
| /* TODO: Add support to pass additional parameters */ |
| fadump_conf->param_area_supported = 0; |
| |
| /* |
| * Firmware supports 32-bit field for size. Align it to PAGE_SIZE |
| * and request firmware to copy multiple kernel boot memory regions. |
| */ |
| fadump_conf->max_copy_size = ALIGN_DOWN(U32_MAX, PAGE_SIZE); |
| |
| /* |
| * Check if dump has been initiated on last reboot. |
| */ |
| prop = of_get_flat_dt_prop(dn, "mpipl-boot", NULL); |
| if (!prop) |
| return; |
| |
| ret = opal_mpipl_query_tag(OPAL_MPIPL_TAG_KERNEL, &be_addr); |
| if ((ret != OPAL_SUCCESS) || !be_addr) { |
| pr_err("Failed to get Kernel metadata (%lld)\n", ret); |
| return; |
| } |
| |
| addr = be64_to_cpu(be_addr); |
| pr_debug("Kernel metadata addr: %llx\n", addr); |
| |
| opal_fdm_active = __va(addr); |
| if (opal_fdm_active->version != OPAL_FADUMP_VERSION) { |
| pr_warn("Supported kernel metadata version: %u, found: %d!\n", |
| OPAL_FADUMP_VERSION, opal_fdm_active->version); |
| pr_warn("WARNING: Kernel metadata format mismatch identified! Core file maybe corrupted..\n"); |
| } |
| |
| /* Kernel regions not registered with f/w for MPIPL */ |
| if (be16_to_cpu(opal_fdm_active->registered_regions) == 0) { |
| opal_fdm_active = NULL; |
| return; |
| } |
| |
| ret = opal_mpipl_query_tag(OPAL_MPIPL_TAG_CPU, &be_addr); |
| if (be_addr) { |
| addr = be64_to_cpu(be_addr); |
| pr_debug("CPU metadata addr: %llx\n", addr); |
| opal_cpu_metadata = __va(addr); |
| } |
| |
| pr_info("Firmware-assisted dump is active.\n"); |
| fadump_conf->dump_active = 1; |
| opal_fadump_get_config(fadump_conf, opal_fdm_active); |
| } |
| #endif /* !CONFIG_PRESERVE_FA_DUMP */ |