blob: 4abe3de23225eb16d199d6b65e5c5be6b1e9f20e [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2012 Regents of the University of California
* Copyright (C) 2017 SiFive
* Copyright (C) 2021 Western Digital Corporation or its affiliates.
*/
#include <linux/bitops.h>
#include <linux/cpumask.h>
#include <linux/mm.h>
#include <linux/percpu.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/static_key.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
#include <asm/mmu_context.h>
#include <asm/switch_to.h>
#ifdef CONFIG_MMU
DEFINE_STATIC_KEY_FALSE(use_asid_allocator);
static unsigned long num_asids;
static atomic_long_t current_version;
static DEFINE_RAW_SPINLOCK(context_lock);
static cpumask_t context_tlb_flush_pending;
static unsigned long *context_asid_map;
static DEFINE_PER_CPU(atomic_long_t, active_context);
static DEFINE_PER_CPU(unsigned long, reserved_context);
static bool check_update_reserved_context(unsigned long cntx,
unsigned long newcntx)
{
int cpu;
bool hit = false;
/*
* Iterate over the set of reserved CONTEXT looking for a match.
* If we find one, then we can update our mm to use new CONTEXT
* (i.e. the same CONTEXT in the current_version) but we can't
* exit the loop early, since we need to ensure that all copies
* of the old CONTEXT are updated to reflect the mm. Failure to do
* so could result in us missing the reserved CONTEXT in a future
* version.
*/
for_each_possible_cpu(cpu) {
if (per_cpu(reserved_context, cpu) == cntx) {
hit = true;
per_cpu(reserved_context, cpu) = newcntx;
}
}
return hit;
}
static void __flush_context(void)
{
int i;
unsigned long cntx;
/* Must be called with context_lock held */
lockdep_assert_held(&context_lock);
/* Update the list of reserved ASIDs and the ASID bitmap. */
bitmap_zero(context_asid_map, num_asids);
/* Mark already active ASIDs as used */
for_each_possible_cpu(i) {
cntx = atomic_long_xchg_relaxed(&per_cpu(active_context, i), 0);
/*
* If this CPU has already been through a rollover, but
* hasn't run another task in the meantime, we must preserve
* its reserved CONTEXT, as this is the only trace we have of
* the process it is still running.
*/
if (cntx == 0)
cntx = per_cpu(reserved_context, i);
__set_bit(cntx2asid(cntx), context_asid_map);
per_cpu(reserved_context, i) = cntx;
}
/* Mark ASID #0 as used because it is used at boot-time */
__set_bit(0, context_asid_map);
/* Queue a TLB invalidation for each CPU on next context-switch */
cpumask_setall(&context_tlb_flush_pending);
}
static unsigned long __new_context(struct mm_struct *mm)
{
static u32 cur_idx = 1;
unsigned long cntx = atomic_long_read(&mm->context.id);
unsigned long asid, ver = atomic_long_read(&current_version);
/* Must be called with context_lock held */
lockdep_assert_held(&context_lock);
if (cntx != 0) {
unsigned long newcntx = ver | cntx2asid(cntx);
/*
* If our current CONTEXT was active during a rollover, we
* can continue to use it and this was just a false alarm.
*/
if (check_update_reserved_context(cntx, newcntx))
return newcntx;
/*
* We had a valid CONTEXT in a previous life, so try to
* re-use it if possible.
*/
if (!__test_and_set_bit(cntx2asid(cntx), context_asid_map))
return newcntx;
}
/*
* Allocate a free ASID. If we can't find one then increment
* current_version and flush all ASIDs.
*/
asid = find_next_zero_bit(context_asid_map, num_asids, cur_idx);
if (asid != num_asids)
goto set_asid;
/* We're out of ASIDs, so increment current_version */
ver = atomic_long_add_return_relaxed(BIT(SATP_ASID_BITS), &current_version);
/* Flush everything */
__flush_context();
/* We have more ASIDs than CPUs, so this will always succeed */
asid = find_next_zero_bit(context_asid_map, num_asids, 1);
set_asid:
__set_bit(asid, context_asid_map);
cur_idx = asid;
return asid | ver;
}
static void set_mm_asid(struct mm_struct *mm, unsigned int cpu)
{
unsigned long flags;
bool need_flush_tlb = false;
unsigned long cntx, old_active_cntx;
cntx = atomic_long_read(&mm->context.id);
/*
* If our active_context is non-zero and the context matches the
* current_version, then we update the active_context entry with a
* relaxed cmpxchg.
*
* Following is how we handle racing with a concurrent rollover:
*
* - We get a zero back from the cmpxchg and end up waiting on the
* lock. Taking the lock synchronises with the rollover and so
* we are forced to see the updated verion.
*
* - We get a valid context back from the cmpxchg then we continue
* using old ASID because __flush_context() would have marked ASID
* of active_context as used and next context switch we will
* allocate new context.
*/
old_active_cntx = atomic_long_read(&per_cpu(active_context, cpu));
if (old_active_cntx &&
(cntx2version(cntx) == atomic_long_read(&current_version)) &&
atomic_long_cmpxchg_relaxed(&per_cpu(active_context, cpu),
old_active_cntx, cntx))
goto switch_mm_fast;
raw_spin_lock_irqsave(&context_lock, flags);
/* Check that our ASID belongs to the current_version. */
cntx = atomic_long_read(&mm->context.id);
if (cntx2version(cntx) != atomic_long_read(&current_version)) {
cntx = __new_context(mm);
atomic_long_set(&mm->context.id, cntx);
}
if (cpumask_test_and_clear_cpu(cpu, &context_tlb_flush_pending))
need_flush_tlb = true;
atomic_long_set(&per_cpu(active_context, cpu), cntx);
raw_spin_unlock_irqrestore(&context_lock, flags);
switch_mm_fast:
csr_write(CSR_SATP, virt_to_pfn(mm->pgd) |
(cntx2asid(cntx) << SATP_ASID_SHIFT) |
satp_mode);
if (need_flush_tlb)
local_flush_tlb_all();
}
static void set_mm_noasid(struct mm_struct *mm)
{
/* Switch the page table and blindly nuke entire local TLB */
csr_write(CSR_SATP, virt_to_pfn(mm->pgd) | satp_mode);
local_flush_tlb_all_asid(0);
}
static inline void set_mm(struct mm_struct *prev,
struct mm_struct *next, unsigned int cpu)
{
/*
* The mm_cpumask indicates which harts' TLBs contain the virtual
* address mapping of the mm. Compared to noasid, using asid
* can't guarantee that stale TLB entries are invalidated because
* the asid mechanism wouldn't flush TLB for every switch_mm for
* performance. So when using asid, keep all CPUs footmarks in
* cpumask() until mm reset.
*/
cpumask_set_cpu(cpu, mm_cpumask(next));
if (static_branch_unlikely(&use_asid_allocator)) {
set_mm_asid(next, cpu);
} else {
cpumask_clear_cpu(cpu, mm_cpumask(prev));
set_mm_noasid(next);
}
}
static int __init asids_init(void)
{
unsigned long asid_bits, old;
/* Figure-out number of ASID bits in HW */
old = csr_read(CSR_SATP);
asid_bits = old | (SATP_ASID_MASK << SATP_ASID_SHIFT);
csr_write(CSR_SATP, asid_bits);
asid_bits = (csr_read(CSR_SATP) >> SATP_ASID_SHIFT) & SATP_ASID_MASK;
asid_bits = fls_long(asid_bits);
csr_write(CSR_SATP, old);
/*
* In the process of determining number of ASID bits (above)
* we polluted the TLB of current HART so let's do TLB flushed
* to remove unwanted TLB enteries.
*/
local_flush_tlb_all();
/* Pre-compute ASID details */
if (asid_bits) {
num_asids = 1 << asid_bits;
}
/*
* Use ASID allocator only if number of HW ASIDs are
* at-least twice more than CPUs
*/
if (num_asids > (2 * num_possible_cpus())) {
atomic_long_set(&current_version, BIT(SATP_ASID_BITS));
context_asid_map = bitmap_zalloc(num_asids, GFP_KERNEL);
if (!context_asid_map)
panic("Failed to allocate bitmap for %lu ASIDs\n",
num_asids);
__set_bit(0, context_asid_map);
static_branch_enable(&use_asid_allocator);
pr_info("ASID allocator using %lu bits (%lu entries)\n",
asid_bits, num_asids);
} else {
pr_info("ASID allocator disabled (%lu bits)\n", asid_bits);
}
return 0;
}
early_initcall(asids_init);
#else
static inline void set_mm(struct mm_struct *prev,
struct mm_struct *next, unsigned int cpu)
{
/* Nothing to do here when there is no MMU */
}
#endif
/*
* When necessary, performs a deferred icache flush for the given MM context,
* on the local CPU. RISC-V has no direct mechanism for instruction cache
* shoot downs, so instead we send an IPI that informs the remote harts they
* need to flush their local instruction caches. To avoid pathologically slow
* behavior in a common case (a bunch of single-hart processes on a many-hart
* machine, ie 'make -j') we avoid the IPIs for harts that are not currently
* executing a MM context and instead schedule a deferred local instruction
* cache flush to be performed before execution resumes on each hart. This
* actually performs that local instruction cache flush, which implicitly only
* refers to the current hart.
*
* The "cpu" argument must be the current local CPU number.
*/
static inline void flush_icache_deferred(struct mm_struct *mm, unsigned int cpu,
struct task_struct *task)
{
#ifdef CONFIG_SMP
if (cpumask_test_and_clear_cpu(cpu, &mm->context.icache_stale_mask)) {
/*
* Ensure the remote hart's writes are visible to this hart.
* This pairs with a barrier in flush_icache_mm.
*/
smp_mb();
/*
* If cache will be flushed in switch_to, no need to flush here.
*/
if (!(task && switch_to_should_flush_icache(task)))
local_flush_icache_all();
}
#endif
}
void switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *task)
{
unsigned int cpu;
if (unlikely(prev == next))
return;
membarrier_arch_switch_mm(prev, next, task);
/*
* Mark the current MM context as inactive, and the next as
* active. This is at least used by the icache flushing
* routines in order to determine who should be flushed.
*/
cpu = smp_processor_id();
set_mm(prev, next, cpu);
flush_icache_deferred(next, cpu, task);
}