| /* |
| * Copyright © 2014 Intel Corporation |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the next |
| * paragraph) shall be included in all copies or substantial portions of the |
| * Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER |
| * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER |
| * DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <drm/drm_atomic_helper.h> |
| #include <drm/drm_damage_helper.h> |
| #include <drm/drm_debugfs.h> |
| |
| #include "i915_drv.h" |
| #include "i915_reg.h" |
| #include "intel_alpm.h" |
| #include "intel_atomic.h" |
| #include "intel_crtc.h" |
| #include "intel_cursor_regs.h" |
| #include "intel_ddi.h" |
| #include "intel_de.h" |
| #include "intel_display_types.h" |
| #include "intel_dp.h" |
| #include "intel_dp_aux.h" |
| #include "intel_frontbuffer.h" |
| #include "intel_hdmi.h" |
| #include "intel_psr.h" |
| #include "intel_psr_regs.h" |
| #include "intel_snps_phy.h" |
| #include "skl_universal_plane.h" |
| |
| /** |
| * DOC: Panel Self Refresh (PSR/SRD) |
| * |
| * Since Haswell Display controller supports Panel Self-Refresh on display |
| * panels witch have a remote frame buffer (RFB) implemented according to PSR |
| * spec in eDP1.3. PSR feature allows the display to go to lower standby states |
| * when system is idle but display is on as it eliminates display refresh |
| * request to DDR memory completely as long as the frame buffer for that |
| * display is unchanged. |
| * |
| * Panel Self Refresh must be supported by both Hardware (source) and |
| * Panel (sink). |
| * |
| * PSR saves power by caching the framebuffer in the panel RFB, which allows us |
| * to power down the link and memory controller. For DSI panels the same idea |
| * is called "manual mode". |
| * |
| * The implementation uses the hardware-based PSR support which automatically |
| * enters/exits self-refresh mode. The hardware takes care of sending the |
| * required DP aux message and could even retrain the link (that part isn't |
| * enabled yet though). The hardware also keeps track of any frontbuffer |
| * changes to know when to exit self-refresh mode again. Unfortunately that |
| * part doesn't work too well, hence why the i915 PSR support uses the |
| * software frontbuffer tracking to make sure it doesn't miss a screen |
| * update. For this integration intel_psr_invalidate() and intel_psr_flush() |
| * get called by the frontbuffer tracking code. Note that because of locking |
| * issues the self-refresh re-enable code is done from a work queue, which |
| * must be correctly synchronized/cancelled when shutting down the pipe." |
| * |
| * DC3CO (DC3 clock off) |
| * |
| * On top of PSR2, GEN12 adds a intermediate power savings state that turns |
| * clock off automatically during PSR2 idle state. |
| * The smaller overhead of DC3co entry/exit vs. the overhead of PSR2 deep sleep |
| * entry/exit allows the HW to enter a low-power state even when page flipping |
| * periodically (for instance a 30fps video playback scenario). |
| * |
| * Every time a flips occurs PSR2 will get out of deep sleep state(if it was), |
| * so DC3CO is enabled and tgl_dc3co_disable_work is schedule to run after 6 |
| * frames, if no other flip occurs and the function above is executed, DC3CO is |
| * disabled and PSR2 is configured to enter deep sleep, resetting again in case |
| * of another flip. |
| * Front buffer modifications do not trigger DC3CO activation on purpose as it |
| * would bring a lot of complexity and most of the moderns systems will only |
| * use page flips. |
| */ |
| |
| /* |
| * Description of PSR mask bits: |
| * |
| * EDP_PSR_DEBUG[16]/EDP_PSR_DEBUG_MASK_DISP_REG_WRITE (hsw-skl): |
| * |
| * When unmasked (nearly) all display register writes (eg. even |
| * SWF) trigger a PSR exit. Some registers are excluded from this |
| * and they have a more specific mask (described below). On icl+ |
| * this bit no longer exists and is effectively always set. |
| * |
| * PIPE_MISC[21]/PIPE_MISC_PSR_MASK_PIPE_REG_WRITE (skl+): |
| * |
| * When unmasked (nearly) all pipe/plane register writes |
| * trigger a PSR exit. Some plane registers are excluded from this |
| * and they have a more specific mask (described below). |
| * |
| * CHICKEN_PIPESL_1[11]/SKL_PSR_MASK_PLANE_FLIP (skl+): |
| * PIPE_MISC[23]/PIPE_MISC_PSR_MASK_PRIMARY_FLIP (bdw): |
| * EDP_PSR_DEBUG[23]/EDP_PSR_DEBUG_MASK_PRIMARY_FLIP (hsw): |
| * |
| * When unmasked PRI_SURF/PLANE_SURF writes trigger a PSR exit. |
| * SPR_SURF/CURBASE are not included in this and instead are |
| * controlled by PIPE_MISC_PSR_MASK_PIPE_REG_WRITE (skl+) or |
| * EDP_PSR_DEBUG_MASK_DISP_REG_WRITE (hsw/bdw). |
| * |
| * PIPE_MISC[22]/PIPE_MISC_PSR_MASK_SPRITE_ENABLE (bdw): |
| * EDP_PSR_DEBUG[21]/EDP_PSR_DEBUG_MASK_SPRITE_ENABLE (hsw): |
| * |
| * When unmasked PSR is blocked as long as the sprite |
| * plane is enabled. skl+ with their universal planes no |
| * longer have a mask bit like this, and no plane being |
| * enabledb blocks PSR. |
| * |
| * PIPE_MISC[21]/PIPE_MISC_PSR_MASK_CURSOR_MOVE (bdw): |
| * EDP_PSR_DEBUG[20]/EDP_PSR_DEBUG_MASK_CURSOR_MOVE (hsw): |
| * |
| * When umasked CURPOS writes trigger a PSR exit. On skl+ |
| * this doesn't exit but CURPOS is included in the |
| * PIPE_MISC_PSR_MASK_PIPE_REG_WRITE mask. |
| * |
| * PIPE_MISC[20]/PIPE_MISC_PSR_MASK_VBLANK_VSYNC_INT (bdw+): |
| * EDP_PSR_DEBUG[19]/EDP_PSR_DEBUG_MASK_VBLANK_VSYNC_INT (hsw): |
| * |
| * When unmasked PSR is blocked as long as vblank and/or vsync |
| * interrupt is unmasked in IMR *and* enabled in IER. |
| * |
| * CHICKEN_TRANS[30]/SKL_UNMASK_VBL_TO_PIPE_IN_SRD (skl+): |
| * CHICKEN_PAR1_1[15]/HSW_MASK_VBL_TO_PIPE_IN_SRD (hsw/bdw): |
| * |
| * Selectcs whether PSR exit generates an extra vblank before |
| * the first frame is transmitted. Also note the opposite polarity |
| * if the bit on hsw/bdw vs. skl+ (masked==generate the extra vblank, |
| * unmasked==do not generate the extra vblank). |
| * |
| * With DC states enabled the extra vblank happens after link training, |
| * with DC states disabled it happens immediately upuon PSR exit trigger. |
| * No idea as of now why there is a difference. HSW/BDW (which don't |
| * even have DMC) always generate it after link training. Go figure. |
| * |
| * Unfortunately CHICKEN_TRANS itself seems to be double buffered |
| * and thus won't latch until the first vblank. So with DC states |
| * enabled the register effctively uses the reset value during DC5 |
| * exit+PSR exit sequence, and thus the bit does nothing until |
| * latched by the vblank that it was trying to prevent from being |
| * generated in the first place. So we should probably call this |
| * one a chicken/egg bit instead on skl+. |
| * |
| * In standby mode (as opposed to link-off) this makes no difference |
| * as the timing generator keeps running the whole time generating |
| * normal periodic vblanks. |
| * |
| * WaPsrDPAMaskVBlankInSRD asks us to set the bit on hsw/bdw, |
| * and doing so makes the behaviour match the skl+ reset value. |
| * |
| * CHICKEN_PIPESL_1[0]/BDW_UNMASK_VBL_TO_REGS_IN_SRD (bdw): |
| * CHICKEN_PIPESL_1[15]/HSW_UNMASK_VBL_TO_REGS_IN_SRD (hsw): |
| * |
| * On BDW without this bit is no vblanks whatsoever are |
| * generated after PSR exit. On HSW this has no apparant effect. |
| * WaPsrDPRSUnmaskVBlankInSRD says to set this. |
| * |
| * The rest of the bits are more self-explanatory and/or |
| * irrelevant for normal operation. |
| * |
| * Description of intel_crtc_state variables. has_psr, has_panel_replay and |
| * has_sel_update: |
| * |
| * has_psr (alone): PSR1 |
| * has_psr + has_sel_update: PSR2 |
| * has_psr + has_panel_replay: Panel Replay |
| * has_psr + has_panel_replay + has_sel_update: Panel Replay Selective Update |
| * |
| * Description of some intel_psr varibles. enabled, panel_replay_enabled, |
| * sel_update_enabled |
| * |
| * enabled (alone): PSR1 |
| * enabled + sel_update_enabled: PSR2 |
| * enabled + panel_replay_enabled: Panel Replay |
| * enabled + panel_replay_enabled + sel_update_enabled: Panel Replay SU |
| */ |
| |
| #define CAN_PSR(intel_dp) ((intel_dp)->psr.sink_support && \ |
| (intel_dp)->psr.source_support) |
| |
| bool intel_encoder_can_psr(struct intel_encoder *encoder) |
| { |
| if (intel_encoder_is_dp(encoder) || encoder->type == INTEL_OUTPUT_DP_MST) |
| return CAN_PSR(enc_to_intel_dp(encoder)) || |
| CAN_PANEL_REPLAY(enc_to_intel_dp(encoder)); |
| else |
| return false; |
| } |
| |
| bool intel_psr_needs_aux_io_power(struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state) |
| { |
| /* |
| * For PSR/PR modes only eDP requires the AUX IO power to be enabled whenever |
| * the output is enabled. For non-eDP outputs the main link is always |
| * on, hence it doesn't require the HW initiated AUX wake-up signaling used |
| * for eDP. |
| * |
| * TODO: |
| * - Consider leaving AUX IO disabled for eDP / PR as well, in case |
| * the ALPM with main-link off mode is not enabled. |
| * - Leave AUX IO enabled for DP / PR, once support for ALPM with |
| * main-link off mode is added for it and this mode gets enabled. |
| */ |
| return intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP) && |
| intel_encoder_can_psr(encoder); |
| } |
| |
| static bool psr_global_enabled(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct intel_connector *connector = intel_dp->attached_connector; |
| |
| switch (intel_dp->psr.debug & I915_PSR_DEBUG_MODE_MASK) { |
| case I915_PSR_DEBUG_DEFAULT: |
| if (display->params.enable_psr == -1) |
| return connector->panel.vbt.psr.enable; |
| return display->params.enable_psr; |
| case I915_PSR_DEBUG_DISABLE: |
| return false; |
| default: |
| return true; |
| } |
| } |
| |
| static bool psr2_global_enabled(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| switch (intel_dp->psr.debug & I915_PSR_DEBUG_MODE_MASK) { |
| case I915_PSR_DEBUG_DISABLE: |
| case I915_PSR_DEBUG_FORCE_PSR1: |
| return false; |
| default: |
| if (display->params.enable_psr == 1) |
| return false; |
| return true; |
| } |
| } |
| |
| static bool psr2_su_region_et_global_enabled(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| if (display->params.enable_psr != -1) |
| return false; |
| |
| return true; |
| } |
| |
| static bool panel_replay_global_enabled(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| if ((display->params.enable_psr != -1) || |
| (intel_dp->psr.debug & I915_PSR_DEBUG_PANEL_REPLAY_DISABLE)) |
| return false; |
| return true; |
| } |
| |
| static u32 psr_irq_psr_error_bit_get(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| return DISPLAY_VER(display) >= 12 ? TGL_PSR_ERROR : |
| EDP_PSR_ERROR(intel_dp->psr.transcoder); |
| } |
| |
| static u32 psr_irq_post_exit_bit_get(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| return DISPLAY_VER(display) >= 12 ? TGL_PSR_POST_EXIT : |
| EDP_PSR_POST_EXIT(intel_dp->psr.transcoder); |
| } |
| |
| static u32 psr_irq_pre_entry_bit_get(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| return DISPLAY_VER(display) >= 12 ? TGL_PSR_PRE_ENTRY : |
| EDP_PSR_PRE_ENTRY(intel_dp->psr.transcoder); |
| } |
| |
| static u32 psr_irq_mask_get(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| return DISPLAY_VER(display) >= 12 ? TGL_PSR_MASK : |
| EDP_PSR_MASK(intel_dp->psr.transcoder); |
| } |
| |
| static i915_reg_t psr_ctl_reg(struct intel_display *display, |
| enum transcoder cpu_transcoder) |
| { |
| if (DISPLAY_VER(display) >= 8) |
| return EDP_PSR_CTL(display, cpu_transcoder); |
| else |
| return HSW_SRD_CTL; |
| } |
| |
| static i915_reg_t psr_debug_reg(struct intel_display *display, |
| enum transcoder cpu_transcoder) |
| { |
| if (DISPLAY_VER(display) >= 8) |
| return EDP_PSR_DEBUG(display, cpu_transcoder); |
| else |
| return HSW_SRD_DEBUG; |
| } |
| |
| static i915_reg_t psr_perf_cnt_reg(struct intel_display *display, |
| enum transcoder cpu_transcoder) |
| { |
| if (DISPLAY_VER(display) >= 8) |
| return EDP_PSR_PERF_CNT(display, cpu_transcoder); |
| else |
| return HSW_SRD_PERF_CNT; |
| } |
| |
| static i915_reg_t psr_status_reg(struct intel_display *display, |
| enum transcoder cpu_transcoder) |
| { |
| if (DISPLAY_VER(display) >= 8) |
| return EDP_PSR_STATUS(display, cpu_transcoder); |
| else |
| return HSW_SRD_STATUS; |
| } |
| |
| static i915_reg_t psr_imr_reg(struct intel_display *display, |
| enum transcoder cpu_transcoder) |
| { |
| if (DISPLAY_VER(display) >= 12) |
| return TRANS_PSR_IMR(display, cpu_transcoder); |
| else |
| return EDP_PSR_IMR; |
| } |
| |
| static i915_reg_t psr_iir_reg(struct intel_display *display, |
| enum transcoder cpu_transcoder) |
| { |
| if (DISPLAY_VER(display) >= 12) |
| return TRANS_PSR_IIR(display, cpu_transcoder); |
| else |
| return EDP_PSR_IIR; |
| } |
| |
| static i915_reg_t psr_aux_ctl_reg(struct intel_display *display, |
| enum transcoder cpu_transcoder) |
| { |
| if (DISPLAY_VER(display) >= 8) |
| return EDP_PSR_AUX_CTL(display, cpu_transcoder); |
| else |
| return HSW_SRD_AUX_CTL; |
| } |
| |
| static i915_reg_t psr_aux_data_reg(struct intel_display *display, |
| enum transcoder cpu_transcoder, int i) |
| { |
| if (DISPLAY_VER(display) >= 8) |
| return EDP_PSR_AUX_DATA(display, cpu_transcoder, i); |
| else |
| return HSW_SRD_AUX_DATA(i); |
| } |
| |
| static void psr_irq_control(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| u32 mask; |
| |
| if (intel_dp->psr.panel_replay_enabled) |
| return; |
| |
| mask = psr_irq_psr_error_bit_get(intel_dp); |
| if (intel_dp->psr.debug & I915_PSR_DEBUG_IRQ) |
| mask |= psr_irq_post_exit_bit_get(intel_dp) | |
| psr_irq_pre_entry_bit_get(intel_dp); |
| |
| intel_de_rmw(display, psr_imr_reg(display, cpu_transcoder), |
| psr_irq_mask_get(intel_dp), ~mask); |
| } |
| |
| static void psr_event_print(struct intel_display *display, |
| u32 val, bool sel_update_enabled) |
| { |
| drm_dbg_kms(display->drm, "PSR exit events: 0x%x\n", val); |
| if (val & PSR_EVENT_PSR2_WD_TIMER_EXPIRE) |
| drm_dbg_kms(display->drm, "\tPSR2 watchdog timer expired\n"); |
| if ((val & PSR_EVENT_PSR2_DISABLED) && sel_update_enabled) |
| drm_dbg_kms(display->drm, "\tPSR2 disabled\n"); |
| if (val & PSR_EVENT_SU_DIRTY_FIFO_UNDERRUN) |
| drm_dbg_kms(display->drm, "\tSU dirty FIFO underrun\n"); |
| if (val & PSR_EVENT_SU_CRC_FIFO_UNDERRUN) |
| drm_dbg_kms(display->drm, "\tSU CRC FIFO underrun\n"); |
| if (val & PSR_EVENT_GRAPHICS_RESET) |
| drm_dbg_kms(display->drm, "\tGraphics reset\n"); |
| if (val & PSR_EVENT_PCH_INTERRUPT) |
| drm_dbg_kms(display->drm, "\tPCH interrupt\n"); |
| if (val & PSR_EVENT_MEMORY_UP) |
| drm_dbg_kms(display->drm, "\tMemory up\n"); |
| if (val & PSR_EVENT_FRONT_BUFFER_MODIFY) |
| drm_dbg_kms(display->drm, "\tFront buffer modification\n"); |
| if (val & PSR_EVENT_WD_TIMER_EXPIRE) |
| drm_dbg_kms(display->drm, "\tPSR watchdog timer expired\n"); |
| if (val & PSR_EVENT_PIPE_REGISTERS_UPDATE) |
| drm_dbg_kms(display->drm, "\tPIPE registers updated\n"); |
| if (val & PSR_EVENT_REGISTER_UPDATE) |
| drm_dbg_kms(display->drm, "\tRegister updated\n"); |
| if (val & PSR_EVENT_HDCP_ENABLE) |
| drm_dbg_kms(display->drm, "\tHDCP enabled\n"); |
| if (val & PSR_EVENT_KVMR_SESSION_ENABLE) |
| drm_dbg_kms(display->drm, "\tKVMR session enabled\n"); |
| if (val & PSR_EVENT_VBI_ENABLE) |
| drm_dbg_kms(display->drm, "\tVBI enabled\n"); |
| if (val & PSR_EVENT_LPSP_MODE_EXIT) |
| drm_dbg_kms(display->drm, "\tLPSP mode exited\n"); |
| if ((val & PSR_EVENT_PSR_DISABLE) && !sel_update_enabled) |
| drm_dbg_kms(display->drm, "\tPSR disabled\n"); |
| } |
| |
| void intel_psr_irq_handler(struct intel_dp *intel_dp, u32 psr_iir) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| ktime_t time_ns = ktime_get(); |
| |
| if (psr_iir & psr_irq_pre_entry_bit_get(intel_dp)) { |
| intel_dp->psr.last_entry_attempt = time_ns; |
| drm_dbg_kms(display->drm, |
| "[transcoder %s] PSR entry attempt in 2 vblanks\n", |
| transcoder_name(cpu_transcoder)); |
| } |
| |
| if (psr_iir & psr_irq_post_exit_bit_get(intel_dp)) { |
| intel_dp->psr.last_exit = time_ns; |
| drm_dbg_kms(display->drm, |
| "[transcoder %s] PSR exit completed\n", |
| transcoder_name(cpu_transcoder)); |
| |
| if (DISPLAY_VER(display) >= 9) { |
| u32 val; |
| |
| val = intel_de_rmw(dev_priv, |
| PSR_EVENT(dev_priv, cpu_transcoder), |
| 0, 0); |
| |
| psr_event_print(display, val, intel_dp->psr.sel_update_enabled); |
| } |
| } |
| |
| if (psr_iir & psr_irq_psr_error_bit_get(intel_dp)) { |
| drm_warn(display->drm, "[transcoder %s] PSR aux error\n", |
| transcoder_name(cpu_transcoder)); |
| |
| intel_dp->psr.irq_aux_error = true; |
| |
| /* |
| * If this interruption is not masked it will keep |
| * interrupting so fast that it prevents the scheduled |
| * work to run. |
| * Also after a PSR error, we don't want to arm PSR |
| * again so we don't care about unmask the interruption |
| * or unset irq_aux_error. |
| */ |
| intel_de_rmw(display, psr_imr_reg(display, cpu_transcoder), |
| 0, psr_irq_psr_error_bit_get(intel_dp)); |
| |
| queue_work(dev_priv->unordered_wq, &intel_dp->psr.work); |
| } |
| } |
| |
| static u8 intel_dp_get_sink_sync_latency(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| u8 val = 8; /* assume the worst if we can't read the value */ |
| |
| if (drm_dp_dpcd_readb(&intel_dp->aux, |
| DP_SYNCHRONIZATION_LATENCY_IN_SINK, &val) == 1) |
| val &= DP_MAX_RESYNC_FRAME_COUNT_MASK; |
| else |
| drm_dbg_kms(display->drm, |
| "Unable to get sink synchronization latency, assuming 8 frames\n"); |
| return val; |
| } |
| |
| static u8 intel_dp_get_su_capability(struct intel_dp *intel_dp) |
| { |
| u8 su_capability = 0; |
| |
| if (intel_dp->psr.sink_panel_replay_su_support) |
| drm_dp_dpcd_readb(&intel_dp->aux, |
| DP_PANEL_PANEL_REPLAY_CAPABILITY, |
| &su_capability); |
| else |
| su_capability = intel_dp->psr_dpcd[1]; |
| |
| return su_capability; |
| } |
| |
| static unsigned int |
| intel_dp_get_su_x_granularity_offset(struct intel_dp *intel_dp) |
| { |
| return intel_dp->psr.sink_panel_replay_su_support ? |
| DP_PANEL_PANEL_REPLAY_X_GRANULARITY : |
| DP_PSR2_SU_X_GRANULARITY; |
| } |
| |
| static unsigned int |
| intel_dp_get_su_y_granularity_offset(struct intel_dp *intel_dp) |
| { |
| return intel_dp->psr.sink_panel_replay_su_support ? |
| DP_PANEL_PANEL_REPLAY_Y_GRANULARITY : |
| DP_PSR2_SU_Y_GRANULARITY; |
| } |
| |
| /* |
| * Note: Bits related to granularity are same in panel replay and psr |
| * registers. Rely on PSR definitions on these "common" bits. |
| */ |
| static void intel_dp_get_su_granularity(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| ssize_t r; |
| u16 w; |
| u8 y; |
| |
| /* |
| * TODO: Do we need to take into account panel supporting both PSR and |
| * Panel replay? |
| */ |
| |
| /* |
| * If sink don't have specific granularity requirements set legacy |
| * ones. |
| */ |
| if (!(intel_dp_get_su_capability(intel_dp) & |
| DP_PSR2_SU_GRANULARITY_REQUIRED)) { |
| /* As PSR2 HW sends full lines, we do not care about x granularity */ |
| w = 4; |
| y = 4; |
| goto exit; |
| } |
| |
| r = drm_dp_dpcd_read(&intel_dp->aux, |
| intel_dp_get_su_x_granularity_offset(intel_dp), |
| &w, 2); |
| if (r != 2) |
| drm_dbg_kms(display->drm, |
| "Unable to read selective update x granularity\n"); |
| /* |
| * Spec says that if the value read is 0 the default granularity should |
| * be used instead. |
| */ |
| if (r != 2 || w == 0) |
| w = 4; |
| |
| r = drm_dp_dpcd_read(&intel_dp->aux, |
| intel_dp_get_su_y_granularity_offset(intel_dp), |
| &y, 1); |
| if (r != 1) { |
| drm_dbg_kms(display->drm, |
| "Unable to read selective update y granularity\n"); |
| y = 4; |
| } |
| if (y == 0) |
| y = 1; |
| |
| exit: |
| intel_dp->psr.su_w_granularity = w; |
| intel_dp->psr.su_y_granularity = y; |
| } |
| |
| static void _panel_replay_init_dpcd(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| if (intel_dp_is_edp(intel_dp)) { |
| if (!intel_alpm_aux_less_wake_supported(intel_dp)) { |
| drm_dbg_kms(display->drm, |
| "Panel doesn't support AUX-less ALPM, eDP Panel Replay not possible\n"); |
| return; |
| } |
| |
| if (!(intel_dp->pr_dpcd & DP_PANEL_REPLAY_EARLY_TRANSPORT_SUPPORT)) { |
| drm_dbg_kms(display->drm, |
| "Panel doesn't support early transport, eDP Panel Replay not possible\n"); |
| return; |
| } |
| } |
| |
| intel_dp->psr.sink_panel_replay_support = true; |
| |
| if (intel_dp->pr_dpcd & DP_PANEL_REPLAY_SU_SUPPORT) |
| intel_dp->psr.sink_panel_replay_su_support = true; |
| |
| drm_dbg_kms(display->drm, |
| "Panel replay %sis supported by panel\n", |
| intel_dp->psr.sink_panel_replay_su_support ? |
| "selective_update " : ""); |
| } |
| |
| static void _psr_init_dpcd(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| drm_dbg_kms(display->drm, "eDP panel supports PSR version %x\n", |
| intel_dp->psr_dpcd[0]); |
| |
| if (drm_dp_has_quirk(&intel_dp->desc, DP_DPCD_QUIRK_NO_PSR)) { |
| drm_dbg_kms(display->drm, |
| "PSR support not currently available for this panel\n"); |
| return; |
| } |
| |
| if (!(intel_dp->edp_dpcd[1] & DP_EDP_SET_POWER_CAP)) { |
| drm_dbg_kms(display->drm, |
| "Panel lacks power state control, PSR cannot be enabled\n"); |
| return; |
| } |
| |
| intel_dp->psr.sink_support = true; |
| intel_dp->psr.sink_sync_latency = |
| intel_dp_get_sink_sync_latency(intel_dp); |
| |
| if (DISPLAY_VER(display) >= 9 && |
| intel_dp->psr_dpcd[0] >= DP_PSR2_WITH_Y_COORD_IS_SUPPORTED) { |
| bool y_req = intel_dp->psr_dpcd[1] & |
| DP_PSR2_SU_Y_COORDINATE_REQUIRED; |
| |
| /* |
| * All panels that supports PSR version 03h (PSR2 + |
| * Y-coordinate) can handle Y-coordinates in VSC but we are |
| * only sure that it is going to be used when required by the |
| * panel. This way panel is capable to do selective update |
| * without a aux frame sync. |
| * |
| * To support PSR version 02h and PSR version 03h without |
| * Y-coordinate requirement panels we would need to enable |
| * GTC first. |
| */ |
| intel_dp->psr.sink_psr2_support = y_req && |
| intel_alpm_aux_wake_supported(intel_dp); |
| drm_dbg_kms(display->drm, "PSR2 %ssupported\n", |
| intel_dp->psr.sink_psr2_support ? "" : "not "); |
| } |
| } |
| |
| void intel_psr_init_dpcd(struct intel_dp *intel_dp) |
| { |
| drm_dp_dpcd_read(&intel_dp->aux, DP_PSR_SUPPORT, intel_dp->psr_dpcd, |
| sizeof(intel_dp->psr_dpcd)); |
| drm_dp_dpcd_readb(&intel_dp->aux, DP_PANEL_REPLAY_CAP, |
| &intel_dp->pr_dpcd); |
| |
| if (intel_dp->pr_dpcd & DP_PANEL_REPLAY_SUPPORT) |
| _panel_replay_init_dpcd(intel_dp); |
| |
| if (intel_dp->psr_dpcd[0]) |
| _psr_init_dpcd(intel_dp); |
| |
| if (intel_dp->psr.sink_psr2_support || |
| intel_dp->psr.sink_panel_replay_su_support) |
| intel_dp_get_su_granularity(intel_dp); |
| } |
| |
| static void hsw_psr_setup_aux(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| u32 aux_clock_divider, aux_ctl; |
| /* write DP_SET_POWER=D0 */ |
| static const u8 aux_msg[] = { |
| [0] = (DP_AUX_NATIVE_WRITE << 4) | ((DP_SET_POWER >> 16) & 0xf), |
| [1] = (DP_SET_POWER >> 8) & 0xff, |
| [2] = DP_SET_POWER & 0xff, |
| [3] = 1 - 1, |
| [4] = DP_SET_POWER_D0, |
| }; |
| int i; |
| |
| BUILD_BUG_ON(sizeof(aux_msg) > 20); |
| for (i = 0; i < sizeof(aux_msg); i += 4) |
| intel_de_write(dev_priv, |
| psr_aux_data_reg(display, cpu_transcoder, i >> 2), |
| intel_dp_aux_pack(&aux_msg[i], sizeof(aux_msg) - i)); |
| |
| aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0); |
| |
| /* Start with bits set for DDI_AUX_CTL register */ |
| aux_ctl = intel_dp->get_aux_send_ctl(intel_dp, sizeof(aux_msg), |
| aux_clock_divider); |
| |
| /* Select only valid bits for SRD_AUX_CTL */ |
| aux_ctl &= EDP_PSR_AUX_CTL_TIME_OUT_MASK | |
| EDP_PSR_AUX_CTL_MESSAGE_SIZE_MASK | |
| EDP_PSR_AUX_CTL_PRECHARGE_2US_MASK | |
| EDP_PSR_AUX_CTL_BIT_CLOCK_2X_MASK; |
| |
| intel_de_write(display, psr_aux_ctl_reg(display, cpu_transcoder), |
| aux_ctl); |
| } |
| |
| static bool psr2_su_region_et_valid(struct intel_dp *intel_dp, bool panel_replay) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| if (DISPLAY_VER(display) < 20 || !intel_dp_is_edp(intel_dp) || |
| intel_dp->psr.debug & I915_PSR_DEBUG_SU_REGION_ET_DISABLE) |
| return false; |
| |
| return panel_replay ? |
| intel_dp->pr_dpcd & DP_PANEL_REPLAY_EARLY_TRANSPORT_SUPPORT : |
| intel_dp->psr_dpcd[0] == DP_PSR2_WITH_Y_COORD_ET_SUPPORTED && |
| psr2_su_region_et_global_enabled(intel_dp); |
| } |
| |
| static void _panel_replay_enable_sink(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| u8 val = DP_PANEL_REPLAY_ENABLE | |
| DP_PANEL_REPLAY_VSC_SDP_CRC_EN | |
| DP_PANEL_REPLAY_UNRECOVERABLE_ERROR_EN | |
| DP_PANEL_REPLAY_RFB_STORAGE_ERROR_EN | |
| DP_PANEL_REPLAY_ACTIVE_FRAME_CRC_ERROR_EN; |
| u8 panel_replay_config2 = DP_PANEL_REPLAY_CRC_VERIFICATION; |
| |
| if (crtc_state->has_sel_update) |
| val |= DP_PANEL_REPLAY_SU_ENABLE; |
| |
| if (crtc_state->enable_psr2_su_region_et) |
| val |= DP_PANEL_REPLAY_ENABLE_SU_REGION_ET; |
| |
| if (crtc_state->req_psr2_sdp_prior_scanline) |
| panel_replay_config2 |= |
| DP_PANEL_REPLAY_SU_REGION_SCANLINE_CAPTURE; |
| |
| drm_dp_dpcd_writeb(&intel_dp->aux, PANEL_REPLAY_CONFIG, val); |
| |
| drm_dp_dpcd_writeb(&intel_dp->aux, PANEL_REPLAY_CONFIG2, |
| panel_replay_config2); |
| } |
| |
| static void _psr_enable_sink(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| u8 val = DP_PSR_ENABLE; |
| |
| if (crtc_state->has_sel_update) { |
| val |= DP_PSR_ENABLE_PSR2 | DP_PSR_IRQ_HPD_WITH_CRC_ERRORS; |
| } else { |
| if (intel_dp->psr.link_standby) |
| val |= DP_PSR_MAIN_LINK_ACTIVE; |
| |
| if (DISPLAY_VER(display) >= 8) |
| val |= DP_PSR_CRC_VERIFICATION; |
| } |
| |
| if (crtc_state->req_psr2_sdp_prior_scanline) |
| val |= DP_PSR_SU_REGION_SCANLINE_CAPTURE; |
| |
| if (crtc_state->enable_psr2_su_region_et) |
| val |= DP_PANEL_REPLAY_ENABLE_SU_REGION_ET; |
| |
| if (intel_dp->psr.entry_setup_frames > 0) |
| val |= DP_PSR_FRAME_CAPTURE; |
| |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, val); |
| } |
| |
| static void intel_psr_enable_sink_alpm(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| u8 val; |
| |
| /* |
| * eDP Panel Replay uses always ALPM |
| * PSR2 uses ALPM but PSR1 doesn't |
| */ |
| if (!intel_dp_is_edp(intel_dp) || (!crtc_state->has_panel_replay && |
| !crtc_state->has_sel_update)) |
| return; |
| |
| val = DP_ALPM_ENABLE | DP_ALPM_LOCK_ERROR_IRQ_HPD_ENABLE; |
| |
| if (crtc_state->has_panel_replay) |
| val |= DP_ALPM_MODE_AUX_LESS; |
| |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_RECEIVER_ALPM_CONFIG, val); |
| } |
| |
| void intel_psr_enable_sink(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| intel_psr_enable_sink_alpm(intel_dp, crtc_state); |
| |
| crtc_state->has_panel_replay ? |
| _panel_replay_enable_sink(intel_dp, crtc_state) : |
| _psr_enable_sink(intel_dp, crtc_state); |
| |
| if (intel_dp_is_edp(intel_dp)) |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0); |
| } |
| |
| static u32 intel_psr1_get_tp_time(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct intel_connector *connector = intel_dp->attached_connector; |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| u32 val = 0; |
| |
| if (DISPLAY_VER(display) >= 11) |
| val |= EDP_PSR_TP4_TIME_0us; |
| |
| if (display->params.psr_safest_params) { |
| val |= EDP_PSR_TP1_TIME_2500us; |
| val |= EDP_PSR_TP2_TP3_TIME_2500us; |
| goto check_tp3_sel; |
| } |
| |
| if (connector->panel.vbt.psr.tp1_wakeup_time_us == 0) |
| val |= EDP_PSR_TP1_TIME_0us; |
| else if (connector->panel.vbt.psr.tp1_wakeup_time_us <= 100) |
| val |= EDP_PSR_TP1_TIME_100us; |
| else if (connector->panel.vbt.psr.tp1_wakeup_time_us <= 500) |
| val |= EDP_PSR_TP1_TIME_500us; |
| else |
| val |= EDP_PSR_TP1_TIME_2500us; |
| |
| if (connector->panel.vbt.psr.tp2_tp3_wakeup_time_us == 0) |
| val |= EDP_PSR_TP2_TP3_TIME_0us; |
| else if (connector->panel.vbt.psr.tp2_tp3_wakeup_time_us <= 100) |
| val |= EDP_PSR_TP2_TP3_TIME_100us; |
| else if (connector->panel.vbt.psr.tp2_tp3_wakeup_time_us <= 500) |
| val |= EDP_PSR_TP2_TP3_TIME_500us; |
| else |
| val |= EDP_PSR_TP2_TP3_TIME_2500us; |
| |
| /* |
| * WA 0479: hsw,bdw |
| * "Do not skip both TP1 and TP2/TP3" |
| */ |
| if (DISPLAY_VER(dev_priv) < 9 && |
| connector->panel.vbt.psr.tp1_wakeup_time_us == 0 && |
| connector->panel.vbt.psr.tp2_tp3_wakeup_time_us == 0) |
| val |= EDP_PSR_TP2_TP3_TIME_100us; |
| |
| check_tp3_sel: |
| if (intel_dp_source_supports_tps3(dev_priv) && |
| drm_dp_tps3_supported(intel_dp->dpcd)) |
| val |= EDP_PSR_TP_TP1_TP3; |
| else |
| val |= EDP_PSR_TP_TP1_TP2; |
| |
| return val; |
| } |
| |
| static u8 psr_compute_idle_frames(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct intel_connector *connector = intel_dp->attached_connector; |
| int idle_frames; |
| |
| /* Let's use 6 as the minimum to cover all known cases including the |
| * off-by-one issue that HW has in some cases. |
| */ |
| idle_frames = max(6, connector->panel.vbt.psr.idle_frames); |
| idle_frames = max(idle_frames, intel_dp->psr.sink_sync_latency + 1); |
| |
| if (drm_WARN_ON(display->drm, idle_frames > 0xf)) |
| idle_frames = 0xf; |
| |
| return idle_frames; |
| } |
| |
| static void hsw_activate_psr1(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| u32 max_sleep_time = 0x1f; |
| u32 val = EDP_PSR_ENABLE; |
| |
| val |= EDP_PSR_IDLE_FRAMES(psr_compute_idle_frames(intel_dp)); |
| |
| if (DISPLAY_VER(display) < 20) |
| val |= EDP_PSR_MAX_SLEEP_TIME(max_sleep_time); |
| |
| if (IS_HASWELL(dev_priv)) |
| val |= EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES; |
| |
| if (intel_dp->psr.link_standby) |
| val |= EDP_PSR_LINK_STANDBY; |
| |
| val |= intel_psr1_get_tp_time(intel_dp); |
| |
| if (DISPLAY_VER(display) >= 8) |
| val |= EDP_PSR_CRC_ENABLE; |
| |
| if (DISPLAY_VER(display) >= 20) |
| val |= LNL_EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp->psr.entry_setup_frames); |
| |
| intel_de_rmw(display, psr_ctl_reg(display, cpu_transcoder), |
| ~EDP_PSR_RESTORE_PSR_ACTIVE_CTX_MASK, val); |
| } |
| |
| static u32 intel_psr2_get_tp_time(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct intel_connector *connector = intel_dp->attached_connector; |
| u32 val = 0; |
| |
| if (display->params.psr_safest_params) |
| return EDP_PSR2_TP2_TIME_2500us; |
| |
| if (connector->panel.vbt.psr.psr2_tp2_tp3_wakeup_time_us >= 0 && |
| connector->panel.vbt.psr.psr2_tp2_tp3_wakeup_time_us <= 50) |
| val |= EDP_PSR2_TP2_TIME_50us; |
| else if (connector->panel.vbt.psr.psr2_tp2_tp3_wakeup_time_us <= 100) |
| val |= EDP_PSR2_TP2_TIME_100us; |
| else if (connector->panel.vbt.psr.psr2_tp2_tp3_wakeup_time_us <= 500) |
| val |= EDP_PSR2_TP2_TIME_500us; |
| else |
| val |= EDP_PSR2_TP2_TIME_2500us; |
| |
| return val; |
| } |
| |
| static int psr2_block_count_lines(struct intel_dp *intel_dp) |
| { |
| return intel_dp->alpm_parameters.io_wake_lines < 9 && |
| intel_dp->alpm_parameters.fast_wake_lines < 9 ? 8 : 12; |
| } |
| |
| static int psr2_block_count(struct intel_dp *intel_dp) |
| { |
| return psr2_block_count_lines(intel_dp) / 4; |
| } |
| |
| static u8 frames_before_su_entry(struct intel_dp *intel_dp) |
| { |
| u8 frames_before_su_entry; |
| |
| frames_before_su_entry = max_t(u8, |
| intel_dp->psr.sink_sync_latency + 1, |
| 2); |
| |
| /* Entry setup frames must be at least 1 less than frames before SU entry */ |
| if (intel_dp->psr.entry_setup_frames >= frames_before_su_entry) |
| frames_before_su_entry = intel_dp->psr.entry_setup_frames + 1; |
| |
| return frames_before_su_entry; |
| } |
| |
| static void dg2_activate_panel_replay(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct intel_psr *psr = &intel_dp->psr; |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| |
| if (intel_dp_is_edp(intel_dp) && psr->sel_update_enabled) { |
| u32 val = psr->su_region_et_enabled ? |
| LNL_EDP_PSR2_SU_REGION_ET_ENABLE : 0; |
| |
| if (intel_dp->psr.req_psr2_sdp_prior_scanline) |
| val |= EDP_PSR2_SU_SDP_SCANLINE; |
| |
| intel_de_write(display, EDP_PSR2_CTL(display, cpu_transcoder), |
| val); |
| } |
| |
| intel_de_rmw(display, |
| PSR2_MAN_TRK_CTL(display, intel_dp->psr.transcoder), |
| 0, ADLP_PSR2_MAN_TRK_CTL_SF_CONTINUOS_FULL_FRAME); |
| |
| intel_de_rmw(display, TRANS_DP2_CTL(intel_dp->psr.transcoder), 0, |
| TRANS_DP2_PANEL_REPLAY_ENABLE); |
| } |
| |
| static void hsw_activate_psr2(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| u32 val = EDP_PSR2_ENABLE; |
| u32 psr_val = 0; |
| |
| val |= EDP_PSR2_IDLE_FRAMES(psr_compute_idle_frames(intel_dp)); |
| |
| if (DISPLAY_VER(display) < 14 && !IS_ALDERLAKE_P(dev_priv)) |
| val |= EDP_SU_TRACK_ENABLE; |
| |
| if (DISPLAY_VER(display) >= 10 && DISPLAY_VER(display) < 13) |
| val |= EDP_Y_COORDINATE_ENABLE; |
| |
| val |= EDP_PSR2_FRAME_BEFORE_SU(frames_before_su_entry(intel_dp)); |
| |
| val |= intel_psr2_get_tp_time(intel_dp); |
| |
| if (DISPLAY_VER(display) >= 12 && DISPLAY_VER(display) < 20) { |
| if (psr2_block_count(intel_dp) > 2) |
| val |= TGL_EDP_PSR2_BLOCK_COUNT_NUM_3; |
| else |
| val |= TGL_EDP_PSR2_BLOCK_COUNT_NUM_2; |
| } |
| |
| /* Wa_22012278275:adl-p */ |
| if (IS_ALDERLAKE_P(dev_priv) && IS_DISPLAY_STEP(display, STEP_A0, STEP_E0)) { |
| static const u8 map[] = { |
| 2, /* 5 lines */ |
| 1, /* 6 lines */ |
| 0, /* 7 lines */ |
| 3, /* 8 lines */ |
| 6, /* 9 lines */ |
| 5, /* 10 lines */ |
| 4, /* 11 lines */ |
| 7, /* 12 lines */ |
| }; |
| /* |
| * Still using the default IO_BUFFER_WAKE and FAST_WAKE, see |
| * comments bellow for more information |
| */ |
| int tmp; |
| |
| tmp = map[intel_dp->alpm_parameters.io_wake_lines - |
| TGL_EDP_PSR2_IO_BUFFER_WAKE_MIN_LINES]; |
| val |= TGL_EDP_PSR2_IO_BUFFER_WAKE(tmp + TGL_EDP_PSR2_IO_BUFFER_WAKE_MIN_LINES); |
| |
| tmp = map[intel_dp->alpm_parameters.fast_wake_lines - TGL_EDP_PSR2_FAST_WAKE_MIN_LINES]; |
| val |= TGL_EDP_PSR2_FAST_WAKE(tmp + TGL_EDP_PSR2_FAST_WAKE_MIN_LINES); |
| } else if (DISPLAY_VER(display) >= 20) { |
| val |= LNL_EDP_PSR2_IO_BUFFER_WAKE(intel_dp->alpm_parameters.io_wake_lines); |
| } else if (DISPLAY_VER(display) >= 12) { |
| val |= TGL_EDP_PSR2_IO_BUFFER_WAKE(intel_dp->alpm_parameters.io_wake_lines); |
| val |= TGL_EDP_PSR2_FAST_WAKE(intel_dp->alpm_parameters.fast_wake_lines); |
| } else if (DISPLAY_VER(display) >= 9) { |
| val |= EDP_PSR2_IO_BUFFER_WAKE(intel_dp->alpm_parameters.io_wake_lines); |
| val |= EDP_PSR2_FAST_WAKE(intel_dp->alpm_parameters.fast_wake_lines); |
| } |
| |
| if (intel_dp->psr.req_psr2_sdp_prior_scanline) |
| val |= EDP_PSR2_SU_SDP_SCANLINE; |
| |
| if (DISPLAY_VER(display) >= 20) |
| psr_val |= LNL_EDP_PSR_ENTRY_SETUP_FRAMES(intel_dp->psr.entry_setup_frames); |
| |
| if (intel_dp->psr.psr2_sel_fetch_enabled) { |
| u32 tmp; |
| |
| tmp = intel_de_read(display, |
| PSR2_MAN_TRK_CTL(display, cpu_transcoder)); |
| drm_WARN_ON(display->drm, !(tmp & PSR2_MAN_TRK_CTL_ENABLE)); |
| } else if (HAS_PSR2_SEL_FETCH(display)) { |
| intel_de_write(display, |
| PSR2_MAN_TRK_CTL(display, cpu_transcoder), 0); |
| } |
| |
| if (intel_dp->psr.su_region_et_enabled) |
| val |= LNL_EDP_PSR2_SU_REGION_ET_ENABLE; |
| |
| /* |
| * PSR2 HW is incorrectly using EDP_PSR_TP1_TP3_SEL and BSpec is |
| * recommending keep this bit unset while PSR2 is enabled. |
| */ |
| intel_de_write(display, psr_ctl_reg(display, cpu_transcoder), psr_val); |
| |
| intel_de_write(display, EDP_PSR2_CTL(display, cpu_transcoder), val); |
| } |
| |
| static bool |
| transcoder_has_psr2(struct intel_display *display, enum transcoder cpu_transcoder) |
| { |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| |
| if (IS_ALDERLAKE_P(dev_priv) || DISPLAY_VER(display) >= 14) |
| return cpu_transcoder == TRANSCODER_A || cpu_transcoder == TRANSCODER_B; |
| else if (DISPLAY_VER(display) >= 12) |
| return cpu_transcoder == TRANSCODER_A; |
| else if (DISPLAY_VER(display) >= 9) |
| return cpu_transcoder == TRANSCODER_EDP; |
| else |
| return false; |
| } |
| |
| static u32 intel_get_frame_time_us(const struct intel_crtc_state *crtc_state) |
| { |
| if (!crtc_state->hw.active) |
| return 0; |
| |
| return DIV_ROUND_UP(1000 * 1000, |
| drm_mode_vrefresh(&crtc_state->hw.adjusted_mode)); |
| } |
| |
| static void psr2_program_idle_frames(struct intel_dp *intel_dp, |
| u32 idle_frames) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| |
| intel_de_rmw(display, EDP_PSR2_CTL(display, cpu_transcoder), |
| EDP_PSR2_IDLE_FRAMES_MASK, |
| EDP_PSR2_IDLE_FRAMES(idle_frames)); |
| } |
| |
| static void tgl_psr2_enable_dc3co(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| |
| psr2_program_idle_frames(intel_dp, 0); |
| intel_display_power_set_target_dc_state(dev_priv, DC_STATE_EN_DC3CO); |
| } |
| |
| static void tgl_psr2_disable_dc3co(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| |
| intel_display_power_set_target_dc_state(dev_priv, DC_STATE_EN_UPTO_DC6); |
| psr2_program_idle_frames(intel_dp, psr_compute_idle_frames(intel_dp)); |
| } |
| |
| static void tgl_dc3co_disable_work(struct work_struct *work) |
| { |
| struct intel_dp *intel_dp = |
| container_of(work, typeof(*intel_dp), psr.dc3co_work.work); |
| |
| mutex_lock(&intel_dp->psr.lock); |
| /* If delayed work is pending, it is not idle */ |
| if (delayed_work_pending(&intel_dp->psr.dc3co_work)) |
| goto unlock; |
| |
| tgl_psr2_disable_dc3co(intel_dp); |
| unlock: |
| mutex_unlock(&intel_dp->psr.lock); |
| } |
| |
| static void tgl_disallow_dc3co_on_psr2_exit(struct intel_dp *intel_dp) |
| { |
| if (!intel_dp->psr.dc3co_exitline) |
| return; |
| |
| cancel_delayed_work(&intel_dp->psr.dc3co_work); |
| /* Before PSR2 exit disallow dc3co*/ |
| tgl_psr2_disable_dc3co(intel_dp); |
| } |
| |
| static bool |
| dc3co_is_pipe_port_compatible(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| enum pipe pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe; |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| enum port port = dig_port->base.port; |
| |
| if (IS_ALDERLAKE_P(dev_priv) || DISPLAY_VER(display) >= 14) |
| return pipe <= PIPE_B && port <= PORT_B; |
| else |
| return pipe == PIPE_A && port == PORT_A; |
| } |
| |
| static void |
| tgl_dc3co_exitline_compute_config(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| const u32 crtc_vdisplay = crtc_state->uapi.adjusted_mode.crtc_vdisplay; |
| struct i915_power_domains *power_domains = &display->power.domains; |
| u32 exit_scanlines; |
| |
| /* |
| * FIXME: Due to the changed sequence of activating/deactivating DC3CO, |
| * disable DC3CO until the changed dc3co activating/deactivating sequence |
| * is applied. B.Specs:49196 |
| */ |
| return; |
| |
| /* |
| * DMC's DC3CO exit mechanism has an issue with Selective Fecth |
| * TODO: when the issue is addressed, this restriction should be removed. |
| */ |
| if (crtc_state->enable_psr2_sel_fetch) |
| return; |
| |
| if (!(power_domains->allowed_dc_mask & DC_STATE_EN_DC3CO)) |
| return; |
| |
| if (!dc3co_is_pipe_port_compatible(intel_dp, crtc_state)) |
| return; |
| |
| /* Wa_16011303918:adl-p */ |
| if (IS_ALDERLAKE_P(dev_priv) && IS_DISPLAY_STEP(display, STEP_A0, STEP_B0)) |
| return; |
| |
| /* |
| * DC3CO Exit time 200us B.Spec 49196 |
| * PSR2 transcoder Early Exit scanlines = ROUNDUP(200 / line time) + 1 |
| */ |
| exit_scanlines = |
| intel_usecs_to_scanlines(&crtc_state->uapi.adjusted_mode, 200) + 1; |
| |
| if (drm_WARN_ON(display->drm, exit_scanlines > crtc_vdisplay)) |
| return; |
| |
| crtc_state->dc3co_exitline = crtc_vdisplay - exit_scanlines; |
| } |
| |
| static bool intel_psr2_sel_fetch_config_valid(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| if (!display->params.enable_psr2_sel_fetch && |
| intel_dp->psr.debug != I915_PSR_DEBUG_ENABLE_SEL_FETCH) { |
| drm_dbg_kms(display->drm, |
| "PSR2 sel fetch not enabled, disabled by parameter\n"); |
| return false; |
| } |
| |
| if (crtc_state->uapi.async_flip) { |
| drm_dbg_kms(display->drm, |
| "PSR2 sel fetch not enabled, async flip enabled\n"); |
| return false; |
| } |
| |
| return crtc_state->enable_psr2_sel_fetch = true; |
| } |
| |
| static bool psr2_granularity_check(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| const struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config; |
| const int crtc_hdisplay = crtc_state->hw.adjusted_mode.crtc_hdisplay; |
| const int crtc_vdisplay = crtc_state->hw.adjusted_mode.crtc_vdisplay; |
| u16 y_granularity = 0; |
| |
| /* PSR2 HW only send full lines so we only need to validate the width */ |
| if (crtc_hdisplay % intel_dp->psr.su_w_granularity) |
| return false; |
| |
| if (crtc_vdisplay % intel_dp->psr.su_y_granularity) |
| return false; |
| |
| /* HW tracking is only aligned to 4 lines */ |
| if (!crtc_state->enable_psr2_sel_fetch) |
| return intel_dp->psr.su_y_granularity == 4; |
| |
| /* |
| * adl_p and mtl platforms have 1 line granularity. |
| * For other platforms with SW tracking we can adjust the y coordinates |
| * to match sink requirement if multiple of 4. |
| */ |
| if (IS_ALDERLAKE_P(dev_priv) || DISPLAY_VER(display) >= 14) |
| y_granularity = intel_dp->psr.su_y_granularity; |
| else if (intel_dp->psr.su_y_granularity <= 2) |
| y_granularity = 4; |
| else if ((intel_dp->psr.su_y_granularity % 4) == 0) |
| y_granularity = intel_dp->psr.su_y_granularity; |
| |
| if (y_granularity == 0 || crtc_vdisplay % y_granularity) |
| return false; |
| |
| if (crtc_state->dsc.compression_enable && |
| vdsc_cfg->slice_height % y_granularity) |
| return false; |
| |
| crtc_state->su_y_granularity = y_granularity; |
| return true; |
| } |
| |
| static bool _compute_psr2_sdp_prior_scanline_indication(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| const struct drm_display_mode *adjusted_mode = &crtc_state->uapi.adjusted_mode; |
| u32 hblank_total, hblank_ns, req_ns; |
| |
| hblank_total = adjusted_mode->crtc_hblank_end - adjusted_mode->crtc_hblank_start; |
| hblank_ns = div_u64(1000000ULL * hblank_total, adjusted_mode->crtc_clock); |
| |
| /* From spec: ((60 / number of lanes) + 11) * 1000 / symbol clock frequency MHz */ |
| req_ns = ((60 / crtc_state->lane_count) + 11) * 1000 / (crtc_state->port_clock / 1000); |
| |
| if ((hblank_ns - req_ns) > 100) |
| return true; |
| |
| /* Not supported <13 / Wa_22012279113:adl-p */ |
| if (DISPLAY_VER(display) < 14 || intel_dp->edp_dpcd[0] < DP_EDP_14b) |
| return false; |
| |
| crtc_state->req_psr2_sdp_prior_scanline = true; |
| return true; |
| } |
| |
| static int intel_psr_entry_setup_frames(struct intel_dp *intel_dp, |
| const struct drm_display_mode *adjusted_mode) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| int psr_setup_time = drm_dp_psr_setup_time(intel_dp->psr_dpcd); |
| int entry_setup_frames = 0; |
| |
| if (psr_setup_time < 0) { |
| drm_dbg_kms(display->drm, |
| "PSR condition failed: Invalid PSR setup time (0x%02x)\n", |
| intel_dp->psr_dpcd[1]); |
| return -ETIME; |
| } |
| |
| if (intel_usecs_to_scanlines(adjusted_mode, psr_setup_time) > |
| adjusted_mode->crtc_vtotal - adjusted_mode->crtc_vdisplay - 1) { |
| if (DISPLAY_VER(display) >= 20) { |
| /* setup entry frames can be up to 3 frames */ |
| entry_setup_frames = 1; |
| drm_dbg_kms(display->drm, |
| "PSR setup entry frames %d\n", |
| entry_setup_frames); |
| } else { |
| drm_dbg_kms(display->drm, |
| "PSR condition failed: PSR setup time (%d us) too long\n", |
| psr_setup_time); |
| return -ETIME; |
| } |
| } |
| |
| return entry_setup_frames; |
| } |
| |
| static bool wake_lines_fit_into_vblank(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| bool aux_less) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| int vblank = crtc_state->hw.adjusted_mode.crtc_vblank_end - |
| crtc_state->hw.adjusted_mode.crtc_vblank_start; |
| int wake_lines; |
| |
| if (aux_less) |
| wake_lines = intel_dp->alpm_parameters.aux_less_wake_lines; |
| else |
| wake_lines = DISPLAY_VER(display) < 20 ? |
| psr2_block_count_lines(intel_dp) : |
| intel_dp->alpm_parameters.io_wake_lines; |
| |
| if (crtc_state->req_psr2_sdp_prior_scanline) |
| vblank -= 1; |
| |
| /* Vblank >= PSR2_CTL Block Count Number maximum line count */ |
| if (vblank < wake_lines) |
| return false; |
| |
| return true; |
| } |
| |
| static bool alpm_config_valid(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| bool aux_less) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| if (!intel_alpm_compute_params(intel_dp, crtc_state)) { |
| drm_dbg_kms(display->drm, |
| "PSR2/Panel Replay not enabled, Unable to use long enough wake times\n"); |
| return false; |
| } |
| |
| if (!wake_lines_fit_into_vblank(intel_dp, crtc_state, aux_less)) { |
| drm_dbg_kms(display->drm, |
| "PSR2/Panel Replay not enabled, too short vblank time\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool intel_psr2_config_valid(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| int crtc_hdisplay = crtc_state->hw.adjusted_mode.crtc_hdisplay; |
| int crtc_vdisplay = crtc_state->hw.adjusted_mode.crtc_vdisplay; |
| int psr_max_h = 0, psr_max_v = 0, max_bpp = 0; |
| |
| if (!intel_dp->psr.sink_psr2_support) |
| return false; |
| |
| /* JSL and EHL only supports eDP 1.3 */ |
| if (IS_JASPERLAKE(dev_priv) || IS_ELKHARTLAKE(dev_priv)) { |
| drm_dbg_kms(display->drm, "PSR2 not supported by phy\n"); |
| return false; |
| } |
| |
| /* Wa_16011181250 */ |
| if (IS_ROCKETLAKE(dev_priv) || IS_ALDERLAKE_S(dev_priv) || |
| IS_DG2(dev_priv)) { |
| drm_dbg_kms(display->drm, |
| "PSR2 is defeatured for this platform\n"); |
| return false; |
| } |
| |
| if (IS_ALDERLAKE_P(dev_priv) && IS_DISPLAY_STEP(display, STEP_A0, STEP_B0)) { |
| drm_dbg_kms(display->drm, |
| "PSR2 not completely functional in this stepping\n"); |
| return false; |
| } |
| |
| if (!transcoder_has_psr2(display, crtc_state->cpu_transcoder)) { |
| drm_dbg_kms(display->drm, |
| "PSR2 not supported in transcoder %s\n", |
| transcoder_name(crtc_state->cpu_transcoder)); |
| return false; |
| } |
| |
| /* |
| * DSC and PSR2 cannot be enabled simultaneously. If a requested |
| * resolution requires DSC to be enabled, priority is given to DSC |
| * over PSR2. |
| */ |
| if (crtc_state->dsc.compression_enable && |
| (DISPLAY_VER(display) < 14 && !IS_ALDERLAKE_P(dev_priv))) { |
| drm_dbg_kms(display->drm, |
| "PSR2 cannot be enabled since DSC is enabled\n"); |
| return false; |
| } |
| |
| if (DISPLAY_VER(display) >= 12) { |
| psr_max_h = 5120; |
| psr_max_v = 3200; |
| max_bpp = 30; |
| } else if (DISPLAY_VER(display) >= 10) { |
| psr_max_h = 4096; |
| psr_max_v = 2304; |
| max_bpp = 24; |
| } else if (DISPLAY_VER(display) == 9) { |
| psr_max_h = 3640; |
| psr_max_v = 2304; |
| max_bpp = 24; |
| } |
| |
| if (crtc_state->pipe_bpp > max_bpp) { |
| drm_dbg_kms(display->drm, |
| "PSR2 not enabled, pipe bpp %d > max supported %d\n", |
| crtc_state->pipe_bpp, max_bpp); |
| return false; |
| } |
| |
| /* Wa_16011303918:adl-p */ |
| if (crtc_state->vrr.enable && |
| IS_ALDERLAKE_P(dev_priv) && IS_DISPLAY_STEP(display, STEP_A0, STEP_B0)) { |
| drm_dbg_kms(display->drm, |
| "PSR2 not enabled, not compatible with HW stepping + VRR\n"); |
| return false; |
| } |
| |
| if (!alpm_config_valid(intel_dp, crtc_state, false)) |
| return false; |
| |
| if (!crtc_state->enable_psr2_sel_fetch && |
| (crtc_hdisplay > psr_max_h || crtc_vdisplay > psr_max_v)) { |
| drm_dbg_kms(display->drm, |
| "PSR2 not enabled, resolution %dx%d > max supported %dx%d\n", |
| crtc_hdisplay, crtc_vdisplay, |
| psr_max_h, psr_max_v); |
| return false; |
| } |
| |
| tgl_dc3co_exitline_compute_config(intel_dp, crtc_state); |
| |
| return true; |
| } |
| |
| static bool intel_sel_update_config_valid(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| if (HAS_PSR2_SEL_FETCH(display) && |
| !intel_psr2_sel_fetch_config_valid(intel_dp, crtc_state) && |
| !HAS_PSR_HW_TRACKING(display)) { |
| drm_dbg_kms(display->drm, |
| "Selective update not enabled, selective fetch not valid and no HW tracking available\n"); |
| goto unsupported; |
| } |
| |
| if (!psr2_global_enabled(intel_dp)) { |
| drm_dbg_kms(display->drm, |
| "Selective update disabled by flag\n"); |
| goto unsupported; |
| } |
| |
| if (!crtc_state->has_panel_replay && !intel_psr2_config_valid(intel_dp, crtc_state)) |
| goto unsupported; |
| |
| if (!_compute_psr2_sdp_prior_scanline_indication(intel_dp, crtc_state)) { |
| drm_dbg_kms(display->drm, |
| "Selective update not enabled, SDP indication do not fit in hblank\n"); |
| goto unsupported; |
| } |
| |
| if (crtc_state->has_panel_replay && (DISPLAY_VER(display) < 14 || |
| !intel_dp->psr.sink_panel_replay_su_support)) |
| goto unsupported; |
| |
| if (crtc_state->crc_enabled) { |
| drm_dbg_kms(display->drm, |
| "Selective update not enabled because it would inhibit pipe CRC calculation\n"); |
| goto unsupported; |
| } |
| |
| if (!psr2_granularity_check(intel_dp, crtc_state)) { |
| drm_dbg_kms(display->drm, |
| "Selective update not enabled, SU granularity not compatible\n"); |
| goto unsupported; |
| } |
| |
| crtc_state->enable_psr2_su_region_et = |
| psr2_su_region_et_valid(intel_dp, crtc_state->has_panel_replay); |
| |
| return true; |
| |
| unsupported: |
| crtc_state->enable_psr2_sel_fetch = false; |
| return false; |
| } |
| |
| static bool _psr_compute_config(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; |
| int entry_setup_frames; |
| |
| /* |
| * Current PSR panels don't work reliably with VRR enabled |
| * So if VRR is enabled, do not enable PSR. |
| */ |
| if (crtc_state->vrr.enable) |
| return false; |
| |
| if (!CAN_PSR(intel_dp)) |
| return false; |
| |
| entry_setup_frames = intel_psr_entry_setup_frames(intel_dp, adjusted_mode); |
| |
| if (entry_setup_frames >= 0) { |
| intel_dp->psr.entry_setup_frames = entry_setup_frames; |
| } else { |
| drm_dbg_kms(display->drm, |
| "PSR condition failed: PSR setup timing not met\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static bool |
| _panel_replay_compute_config(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct intel_connector *connector = |
| to_intel_connector(conn_state->connector); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| |
| if (!CAN_PANEL_REPLAY(intel_dp)) |
| return false; |
| |
| if (!panel_replay_global_enabled(intel_dp)) { |
| drm_dbg_kms(display->drm, "Panel Replay disabled by flag\n"); |
| return false; |
| } |
| |
| if (!intel_dp_is_edp(intel_dp)) |
| return true; |
| |
| /* Remaining checks are for eDP only */ |
| |
| /* 128b/132b Panel Replay is not supported on eDP */ |
| if (intel_dp_is_uhbr(crtc_state)) { |
| drm_dbg_kms(display->drm, |
| "Panel Replay is not supported with 128b/132b\n"); |
| return false; |
| } |
| |
| /* HW will not allow Panel Replay on eDP when HDCP enabled */ |
| if (conn_state->content_protection == |
| DRM_MODE_CONTENT_PROTECTION_DESIRED || |
| (conn_state->content_protection == |
| DRM_MODE_CONTENT_PROTECTION_ENABLED && hdcp->value == |
| DRM_MODE_CONTENT_PROTECTION_UNDESIRED)) { |
| drm_dbg_kms(display->drm, |
| "Panel Replay is not supported with HDCP\n"); |
| return false; |
| } |
| |
| if (!alpm_config_valid(intel_dp, crtc_state, true)) |
| return false; |
| |
| if (crtc_state->crc_enabled) { |
| drm_dbg_kms(display->drm, |
| "Panel Replay not enabled because it would inhibit pipe CRC calculation\n"); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| void intel_psr_compute_config(struct intel_dp *intel_dp, |
| struct intel_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode; |
| |
| if (!psr_global_enabled(intel_dp)) { |
| drm_dbg_kms(display->drm, "PSR disabled by flag\n"); |
| return; |
| } |
| |
| if (intel_dp->psr.sink_not_reliable) { |
| drm_dbg_kms(display->drm, |
| "PSR sink implementation is not reliable\n"); |
| return; |
| } |
| |
| if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { |
| drm_dbg_kms(display->drm, |
| "PSR condition failed: Interlaced mode enabled\n"); |
| return; |
| } |
| |
| /* |
| * FIXME figure out what is wrong with PSR+joiner and |
| * fix it. Presumably something related to the fact that |
| * PSR is a transcoder level feature. |
| */ |
| if (crtc_state->joiner_pipes) { |
| drm_dbg_kms(display->drm, |
| "PSR disabled due to joiner\n"); |
| return; |
| } |
| |
| crtc_state->has_panel_replay = _panel_replay_compute_config(intel_dp, |
| crtc_state, |
| conn_state); |
| |
| crtc_state->has_psr = crtc_state->has_panel_replay ? true : |
| _psr_compute_config(intel_dp, crtc_state); |
| |
| if (!crtc_state->has_psr) |
| return; |
| |
| crtc_state->has_sel_update = intel_sel_update_config_valid(intel_dp, crtc_state); |
| } |
| |
| void intel_psr_get_config(struct intel_encoder *encoder, |
| struct intel_crtc_state *pipe_config) |
| { |
| struct intel_display *display = to_intel_display(encoder); |
| struct intel_digital_port *dig_port = enc_to_dig_port(encoder); |
| enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; |
| struct intel_dp *intel_dp; |
| u32 val; |
| |
| if (!dig_port) |
| return; |
| |
| intel_dp = &dig_port->dp; |
| if (!(CAN_PSR(intel_dp) || CAN_PANEL_REPLAY(intel_dp))) |
| return; |
| |
| mutex_lock(&intel_dp->psr.lock); |
| if (!intel_dp->psr.enabled) |
| goto unlock; |
| |
| if (intel_dp->psr.panel_replay_enabled) { |
| pipe_config->has_psr = pipe_config->has_panel_replay = true; |
| } else { |
| /* |
| * Not possible to read EDP_PSR/PSR2_CTL registers as it is |
| * enabled/disabled because of frontbuffer tracking and others. |
| */ |
| pipe_config->has_psr = true; |
| } |
| |
| pipe_config->has_sel_update = intel_dp->psr.sel_update_enabled; |
| pipe_config->infoframes.enable |= intel_hdmi_infoframe_enable(DP_SDP_VSC); |
| |
| if (!intel_dp->psr.sel_update_enabled) |
| goto unlock; |
| |
| if (HAS_PSR2_SEL_FETCH(display)) { |
| val = intel_de_read(display, |
| PSR2_MAN_TRK_CTL(display, cpu_transcoder)); |
| if (val & PSR2_MAN_TRK_CTL_ENABLE) |
| pipe_config->enable_psr2_sel_fetch = true; |
| } |
| |
| pipe_config->enable_psr2_su_region_et = intel_dp->psr.su_region_et_enabled; |
| |
| if (DISPLAY_VER(display) >= 12) { |
| val = intel_de_read(display, |
| TRANS_EXITLINE(display, cpu_transcoder)); |
| pipe_config->dc3co_exitline = REG_FIELD_GET(EXITLINE_MASK, val); |
| } |
| unlock: |
| mutex_unlock(&intel_dp->psr.lock); |
| } |
| |
| static void intel_psr_activate(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| |
| drm_WARN_ON(display->drm, |
| transcoder_has_psr2(display, cpu_transcoder) && |
| intel_de_read(display, EDP_PSR2_CTL(display, cpu_transcoder)) & EDP_PSR2_ENABLE); |
| |
| drm_WARN_ON(display->drm, |
| intel_de_read(display, psr_ctl_reg(display, cpu_transcoder)) & EDP_PSR_ENABLE); |
| |
| drm_WARN_ON(display->drm, intel_dp->psr.active); |
| |
| lockdep_assert_held(&intel_dp->psr.lock); |
| |
| /* psr1, psr2 and panel-replay are mutually exclusive.*/ |
| if (intel_dp->psr.panel_replay_enabled) |
| dg2_activate_panel_replay(intel_dp); |
| else if (intel_dp->psr.sel_update_enabled) |
| hsw_activate_psr2(intel_dp); |
| else |
| hsw_activate_psr1(intel_dp); |
| |
| intel_dp->psr.active = true; |
| } |
| |
| static u32 wa_16013835468_bit_get(struct intel_dp *intel_dp) |
| { |
| switch (intel_dp->psr.pipe) { |
| case PIPE_A: |
| return LATENCY_REPORTING_REMOVED_PIPE_A; |
| case PIPE_B: |
| return LATENCY_REPORTING_REMOVED_PIPE_B; |
| case PIPE_C: |
| return LATENCY_REPORTING_REMOVED_PIPE_C; |
| case PIPE_D: |
| return LATENCY_REPORTING_REMOVED_PIPE_D; |
| default: |
| MISSING_CASE(intel_dp->psr.pipe); |
| return 0; |
| } |
| } |
| |
| /* |
| * Wa_16013835468 |
| * Wa_14015648006 |
| */ |
| static void wm_optimization_wa(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| bool set_wa_bit = false; |
| |
| /* Wa_14015648006 */ |
| if (IS_DISPLAY_VER(display, 11, 14)) |
| set_wa_bit |= crtc_state->wm_level_disabled; |
| |
| /* Wa_16013835468 */ |
| if (DISPLAY_VER(display) == 12) |
| set_wa_bit |= crtc_state->hw.adjusted_mode.crtc_vblank_start != |
| crtc_state->hw.adjusted_mode.crtc_vdisplay; |
| |
| if (set_wa_bit) |
| intel_de_rmw(display, GEN8_CHICKEN_DCPR_1, |
| 0, wa_16013835468_bit_get(intel_dp)); |
| else |
| intel_de_rmw(display, GEN8_CHICKEN_DCPR_1, |
| wa_16013835468_bit_get(intel_dp), 0); |
| } |
| |
| static void intel_psr_enable_source(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| u32 mask = 0; |
| |
| /* |
| * Only HSW and BDW have PSR AUX registers that need to be setup. |
| * SKL+ use hardcoded values PSR AUX transactions |
| */ |
| if (DISPLAY_VER(display) < 9) |
| hsw_psr_setup_aux(intel_dp); |
| |
| /* |
| * Per Spec: Avoid continuous PSR exit by masking MEMUP and HPD also |
| * mask LPSP to avoid dependency on other drivers that might block |
| * runtime_pm besides preventing other hw tracking issues now we |
| * can rely on frontbuffer tracking. |
| * |
| * From bspec prior LunarLake: |
| * Only PSR_MASK[Mask FBC modify] and PSR_MASK[Mask Hotplug] are used in |
| * panel replay mode. |
| * |
| * From bspec beyod LunarLake: |
| * Panel Replay on DP: No bits are applicable |
| * Panel Replay on eDP: All bits are applicable |
| */ |
| if (DISPLAY_VER(display) < 20 || intel_dp_is_edp(intel_dp)) |
| mask = EDP_PSR_DEBUG_MASK_HPD; |
| |
| if (intel_dp_is_edp(intel_dp)) { |
| mask |= EDP_PSR_DEBUG_MASK_MEMUP; |
| |
| /* |
| * For some unknown reason on HSW non-ULT (or at least on |
| * Dell Latitude E6540) external displays start to flicker |
| * when PSR is enabled on the eDP. SR/PC6 residency is much |
| * higher than should be possible with an external display. |
| * As a workaround leave LPSP unmasked to prevent PSR entry |
| * when external displays are active. |
| */ |
| if (DISPLAY_VER(display) >= 8 || IS_HASWELL_ULT(dev_priv)) |
| mask |= EDP_PSR_DEBUG_MASK_LPSP; |
| |
| if (DISPLAY_VER(display) < 20) |
| mask |= EDP_PSR_DEBUG_MASK_MAX_SLEEP; |
| |
| /* |
| * No separate pipe reg write mask on hsw/bdw, so have to unmask all |
| * registers in order to keep the CURSURFLIVE tricks working :( |
| */ |
| if (IS_DISPLAY_VER(display, 9, 10)) |
| mask |= EDP_PSR_DEBUG_MASK_DISP_REG_WRITE; |
| |
| /* allow PSR with sprite enabled */ |
| if (IS_HASWELL(dev_priv)) |
| mask |= EDP_PSR_DEBUG_MASK_SPRITE_ENABLE; |
| } |
| |
| intel_de_write(display, psr_debug_reg(display, cpu_transcoder), mask); |
| |
| psr_irq_control(intel_dp); |
| |
| /* |
| * TODO: if future platforms supports DC3CO in more than one |
| * transcoder, EXITLINE will need to be unset when disabling PSR |
| */ |
| if (intel_dp->psr.dc3co_exitline) |
| intel_de_rmw(display, |
| TRANS_EXITLINE(display, cpu_transcoder), |
| EXITLINE_MASK, |
| intel_dp->psr.dc3co_exitline << EXITLINE_SHIFT | EXITLINE_ENABLE); |
| |
| if (HAS_PSR_HW_TRACKING(display) && HAS_PSR2_SEL_FETCH(display)) |
| intel_de_rmw(display, CHICKEN_PAR1_1, IGNORE_PSR2_HW_TRACKING, |
| intel_dp->psr.psr2_sel_fetch_enabled ? |
| IGNORE_PSR2_HW_TRACKING : 0); |
| |
| if (intel_dp_is_edp(intel_dp)) |
| intel_alpm_configure(intel_dp, crtc_state); |
| |
| /* |
| * Wa_16013835468 |
| * Wa_14015648006 |
| */ |
| wm_optimization_wa(intel_dp, crtc_state); |
| |
| if (intel_dp->psr.sel_update_enabled) { |
| if (DISPLAY_VER(display) == 9) |
| intel_de_rmw(display, CHICKEN_TRANS(cpu_transcoder), 0, |
| PSR2_VSC_ENABLE_PROG_HEADER | |
| PSR2_ADD_VERTICAL_LINE_COUNT); |
| |
| /* |
| * Wa_16014451276:adlp,mtl[a0,b0] |
| * All supported adlp panels have 1-based X granularity, this may |
| * cause issues if non-supported panels are used. |
| */ |
| if (!intel_dp->psr.panel_replay_enabled && |
| (IS_DISPLAY_VER_STEP(display, IP_VER(14, 0), STEP_A0, STEP_B0) || |
| IS_ALDERLAKE_P(dev_priv))) |
| intel_de_rmw(display, hsw_chicken_trans_reg(dev_priv, cpu_transcoder), |
| 0, ADLP_1_BASED_X_GRANULARITY); |
| |
| /* Wa_16012604467:adlp,mtl[a0,b0] */ |
| if (!intel_dp->psr.panel_replay_enabled && |
| IS_DISPLAY_VER_STEP(display, IP_VER(14, 0), STEP_A0, STEP_B0)) |
| intel_de_rmw(display, |
| MTL_CLKGATE_DIS_TRANS(display, cpu_transcoder), |
| 0, |
| MTL_CLKGATE_DIS_TRANS_DMASC_GATING_DIS); |
| else if (IS_ALDERLAKE_P(dev_priv)) |
| intel_de_rmw(display, CLKGATE_DIS_MISC, 0, |
| CLKGATE_DIS_MISC_DMASC_GATING_DIS); |
| } |
| } |
| |
| static bool psr_interrupt_error_check(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| u32 val; |
| |
| if (intel_dp->psr.panel_replay_enabled) |
| goto no_err; |
| |
| /* |
| * If a PSR error happened and the driver is reloaded, the EDP_PSR_IIR |
| * will still keep the error set even after the reset done in the |
| * irq_preinstall and irq_uninstall hooks. |
| * And enabling in this situation cause the screen to freeze in the |
| * first time that PSR HW tries to activate so lets keep PSR disabled |
| * to avoid any rendering problems. |
| */ |
| val = intel_de_read(display, psr_iir_reg(display, cpu_transcoder)); |
| val &= psr_irq_psr_error_bit_get(intel_dp); |
| if (val) { |
| intel_dp->psr.sink_not_reliable = true; |
| drm_dbg_kms(display->drm, |
| "PSR interruption error set, not enabling PSR\n"); |
| return false; |
| } |
| |
| no_err: |
| return true; |
| } |
| |
| static void intel_psr_enable_locked(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| u32 val; |
| |
| drm_WARN_ON(display->drm, intel_dp->psr.enabled); |
| |
| intel_dp->psr.sel_update_enabled = crtc_state->has_sel_update; |
| intel_dp->psr.panel_replay_enabled = crtc_state->has_panel_replay; |
| intel_dp->psr.busy_frontbuffer_bits = 0; |
| intel_dp->psr.pipe = to_intel_crtc(crtc_state->uapi.crtc)->pipe; |
| intel_dp->psr.transcoder = crtc_state->cpu_transcoder; |
| /* DC5/DC6 requires at least 6 idle frames */ |
| val = usecs_to_jiffies(intel_get_frame_time_us(crtc_state) * 6); |
| intel_dp->psr.dc3co_exit_delay = val; |
| intel_dp->psr.dc3co_exitline = crtc_state->dc3co_exitline; |
| intel_dp->psr.psr2_sel_fetch_enabled = crtc_state->enable_psr2_sel_fetch; |
| intel_dp->psr.su_region_et_enabled = crtc_state->enable_psr2_su_region_et; |
| intel_dp->psr.psr2_sel_fetch_cff_enabled = false; |
| intel_dp->psr.req_psr2_sdp_prior_scanline = |
| crtc_state->req_psr2_sdp_prior_scanline; |
| |
| if (!psr_interrupt_error_check(intel_dp)) |
| return; |
| |
| if (intel_dp->psr.panel_replay_enabled) { |
| drm_dbg_kms(display->drm, "Enabling Panel Replay\n"); |
| } else { |
| drm_dbg_kms(display->drm, "Enabling PSR%s\n", |
| intel_dp->psr.sel_update_enabled ? "2" : "1"); |
| |
| /* |
| * Panel replay has to be enabled before link training: doing it |
| * only for PSR here. |
| */ |
| intel_psr_enable_sink(intel_dp, crtc_state); |
| } |
| |
| if (intel_dp_is_edp(intel_dp)) |
| intel_snps_phy_update_psr_power_state(&dig_port->base, true); |
| |
| intel_psr_enable_source(intel_dp, crtc_state); |
| intel_dp->psr.enabled = true; |
| intel_dp->psr.paused = false; |
| |
| intel_psr_activate(intel_dp); |
| } |
| |
| static void intel_psr_exit(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| u32 val; |
| |
| if (!intel_dp->psr.active) { |
| if (transcoder_has_psr2(display, cpu_transcoder)) { |
| val = intel_de_read(display, |
| EDP_PSR2_CTL(display, cpu_transcoder)); |
| drm_WARN_ON(display->drm, val & EDP_PSR2_ENABLE); |
| } |
| |
| val = intel_de_read(display, |
| psr_ctl_reg(display, cpu_transcoder)); |
| drm_WARN_ON(display->drm, val & EDP_PSR_ENABLE); |
| |
| return; |
| } |
| |
| if (intel_dp->psr.panel_replay_enabled) { |
| intel_de_rmw(display, TRANS_DP2_CTL(intel_dp->psr.transcoder), |
| TRANS_DP2_PANEL_REPLAY_ENABLE, 0); |
| } else if (intel_dp->psr.sel_update_enabled) { |
| tgl_disallow_dc3co_on_psr2_exit(intel_dp); |
| |
| val = intel_de_rmw(display, |
| EDP_PSR2_CTL(display, cpu_transcoder), |
| EDP_PSR2_ENABLE, 0); |
| |
| drm_WARN_ON(display->drm, !(val & EDP_PSR2_ENABLE)); |
| } else { |
| val = intel_de_rmw(display, |
| psr_ctl_reg(display, cpu_transcoder), |
| EDP_PSR_ENABLE, 0); |
| |
| drm_WARN_ON(display->drm, !(val & EDP_PSR_ENABLE)); |
| } |
| intel_dp->psr.active = false; |
| } |
| |
| static void intel_psr_wait_exit_locked(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| i915_reg_t psr_status; |
| u32 psr_status_mask; |
| |
| if (intel_dp_is_edp(intel_dp) && (intel_dp->psr.sel_update_enabled || |
| intel_dp->psr.panel_replay_enabled)) { |
| psr_status = EDP_PSR2_STATUS(display, cpu_transcoder); |
| psr_status_mask = EDP_PSR2_STATUS_STATE_MASK; |
| } else { |
| psr_status = psr_status_reg(display, cpu_transcoder); |
| psr_status_mask = EDP_PSR_STATUS_STATE_MASK; |
| } |
| |
| /* Wait till PSR is idle */ |
| if (intel_de_wait_for_clear(display, psr_status, |
| psr_status_mask, 2000)) |
| drm_err(display->drm, "Timed out waiting PSR idle state\n"); |
| } |
| |
| static void intel_psr_disable_locked(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| |
| lockdep_assert_held(&intel_dp->psr.lock); |
| |
| if (!intel_dp->psr.enabled) |
| return; |
| |
| if (intel_dp->psr.panel_replay_enabled) |
| drm_dbg_kms(display->drm, "Disabling Panel Replay\n"); |
| else |
| drm_dbg_kms(display->drm, "Disabling PSR%s\n", |
| intel_dp->psr.sel_update_enabled ? "2" : "1"); |
| |
| intel_psr_exit(intel_dp); |
| intel_psr_wait_exit_locked(intel_dp); |
| |
| /* |
| * Wa_16013835468 |
| * Wa_14015648006 |
| */ |
| if (DISPLAY_VER(display) >= 11) |
| intel_de_rmw(display, GEN8_CHICKEN_DCPR_1, |
| wa_16013835468_bit_get(intel_dp), 0); |
| |
| if (intel_dp->psr.sel_update_enabled) { |
| /* Wa_16012604467:adlp,mtl[a0,b0] */ |
| if (!intel_dp->psr.panel_replay_enabled && |
| IS_DISPLAY_VER_STEP(display, IP_VER(14, 0), STEP_A0, STEP_B0)) |
| intel_de_rmw(display, |
| MTL_CLKGATE_DIS_TRANS(display, cpu_transcoder), |
| MTL_CLKGATE_DIS_TRANS_DMASC_GATING_DIS, 0); |
| else if (IS_ALDERLAKE_P(dev_priv)) |
| intel_de_rmw(display, CLKGATE_DIS_MISC, |
| CLKGATE_DIS_MISC_DMASC_GATING_DIS, 0); |
| } |
| |
| if (intel_dp_is_edp(intel_dp)) |
| intel_snps_phy_update_psr_power_state(&dp_to_dig_port(intel_dp)->base, false); |
| |
| /* Panel Replay on eDP is always using ALPM aux less. */ |
| if (intel_dp->psr.panel_replay_enabled && intel_dp_is_edp(intel_dp)) { |
| intel_de_rmw(display, ALPM_CTL(display, cpu_transcoder), |
| ALPM_CTL_ALPM_ENABLE | |
| ALPM_CTL_ALPM_AUX_LESS_ENABLE, 0); |
| |
| intel_de_rmw(display, |
| PORT_ALPM_CTL(display, cpu_transcoder), |
| PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE, 0); |
| } |
| |
| /* Disable PSR on Sink */ |
| if (!intel_dp->psr.panel_replay_enabled) { |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, 0); |
| |
| if (intel_dp->psr.sel_update_enabled) |
| drm_dp_dpcd_writeb(&intel_dp->aux, |
| DP_RECEIVER_ALPM_CONFIG, 0); |
| } |
| |
| intel_dp->psr.enabled = false; |
| intel_dp->psr.panel_replay_enabled = false; |
| intel_dp->psr.sel_update_enabled = false; |
| intel_dp->psr.psr2_sel_fetch_enabled = false; |
| intel_dp->psr.su_region_et_enabled = false; |
| intel_dp->psr.psr2_sel_fetch_cff_enabled = false; |
| } |
| |
| /** |
| * intel_psr_disable - Disable PSR |
| * @intel_dp: Intel DP |
| * @old_crtc_state: old CRTC state |
| * |
| * This function needs to be called before disabling pipe. |
| */ |
| void intel_psr_disable(struct intel_dp *intel_dp, |
| const struct intel_crtc_state *old_crtc_state) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| |
| if (!old_crtc_state->has_psr) |
| return; |
| |
| if (drm_WARN_ON(display->drm, !CAN_PSR(intel_dp))) |
| return; |
| |
| mutex_lock(&intel_dp->psr.lock); |
| |
| intel_psr_disable_locked(intel_dp); |
| |
| mutex_unlock(&intel_dp->psr.lock); |
| cancel_work_sync(&intel_dp->psr.work); |
| cancel_delayed_work_sync(&intel_dp->psr.dc3co_work); |
| } |
| |
| /** |
| * intel_psr_pause - Pause PSR |
| * @intel_dp: Intel DP |
| * |
| * This function need to be called after enabling psr. |
| */ |
| void intel_psr_pause(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct intel_psr *psr = &intel_dp->psr; |
| |
| if (!CAN_PSR(intel_dp) && !CAN_PANEL_REPLAY(intel_dp)) |
| return; |
| |
| mutex_lock(&psr->lock); |
| |
| if (!psr->enabled) { |
| mutex_unlock(&psr->lock); |
| return; |
| } |
| |
| /* If we ever hit this, we will need to add refcount to pause/resume */ |
| drm_WARN_ON(display->drm, psr->paused); |
| |
| intel_psr_exit(intel_dp); |
| intel_psr_wait_exit_locked(intel_dp); |
| psr->paused = true; |
| |
| mutex_unlock(&psr->lock); |
| |
| cancel_work_sync(&psr->work); |
| cancel_delayed_work_sync(&psr->dc3co_work); |
| } |
| |
| /** |
| * intel_psr_resume - Resume PSR |
| * @intel_dp: Intel DP |
| * |
| * This function need to be called after pausing psr. |
| */ |
| void intel_psr_resume(struct intel_dp *intel_dp) |
| { |
| struct intel_psr *psr = &intel_dp->psr; |
| |
| if (!CAN_PSR(intel_dp) && !CAN_PANEL_REPLAY(intel_dp)) |
| return; |
| |
| mutex_lock(&psr->lock); |
| |
| if (!psr->paused) |
| goto unlock; |
| |
| psr->paused = false; |
| intel_psr_activate(intel_dp); |
| |
| unlock: |
| mutex_unlock(&psr->lock); |
| } |
| |
| static u32 man_trk_ctl_enable_bit_get(struct intel_display *display) |
| { |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| |
| return IS_ALDERLAKE_P(dev_priv) || DISPLAY_VER(display) >= 14 ? 0 : |
| PSR2_MAN_TRK_CTL_ENABLE; |
| } |
| |
| static u32 man_trk_ctl_single_full_frame_bit_get(struct intel_display *display) |
| { |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| |
| return IS_ALDERLAKE_P(dev_priv) || DISPLAY_VER(display) >= 14 ? |
| ADLP_PSR2_MAN_TRK_CTL_SF_SINGLE_FULL_FRAME : |
| PSR2_MAN_TRK_CTL_SF_SINGLE_FULL_FRAME; |
| } |
| |
| static u32 man_trk_ctl_partial_frame_bit_get(struct intel_display *display) |
| { |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| |
| return IS_ALDERLAKE_P(dev_priv) || DISPLAY_VER(display) >= 14 ? |
| ADLP_PSR2_MAN_TRK_CTL_SF_PARTIAL_FRAME_UPDATE : |
| PSR2_MAN_TRK_CTL_SF_PARTIAL_FRAME_UPDATE; |
| } |
| |
| static u32 man_trk_ctl_continuos_full_frame(struct intel_display *display) |
| { |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| |
| return IS_ALDERLAKE_P(dev_priv) || DISPLAY_VER(display) >= 14 ? |
| ADLP_PSR2_MAN_TRK_CTL_SF_CONTINUOS_FULL_FRAME : |
| PSR2_MAN_TRK_CTL_SF_CONTINUOS_FULL_FRAME; |
| } |
| |
| static void psr_force_hw_tracking_exit(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| |
| if (intel_dp->psr.psr2_sel_fetch_enabled) |
| intel_de_write(display, |
| PSR2_MAN_TRK_CTL(display, cpu_transcoder), |
| man_trk_ctl_enable_bit_get(display) | |
| man_trk_ctl_partial_frame_bit_get(display) | |
| man_trk_ctl_single_full_frame_bit_get(display) | |
| man_trk_ctl_continuos_full_frame(display)); |
| |
| /* |
| * Display WA #0884: skl+ |
| * This documented WA for bxt can be safely applied |
| * broadly so we can force HW tracking to exit PSR |
| * instead of disabling and re-enabling. |
| * Workaround tells us to write 0 to CUR_SURFLIVE_A, |
| * but it makes more sense write to the current active |
| * pipe. |
| * |
| * This workaround do not exist for platforms with display 10 or newer |
| * but testing proved that it works for up display 13, for newer |
| * than that testing will be needed. |
| */ |
| intel_de_write(display, CURSURFLIVE(display, intel_dp->psr.pipe), 0); |
| } |
| |
| void intel_psr2_program_trans_man_trk_ctl(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(crtc_state); |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| enum transcoder cpu_transcoder = crtc_state->cpu_transcoder; |
| struct intel_encoder *encoder; |
| |
| if (!crtc_state->enable_psr2_sel_fetch) |
| return; |
| |
| for_each_intel_encoder_mask_with_psr(display->drm, encoder, |
| crtc_state->uapi.encoder_mask) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| lockdep_assert_held(&intel_dp->psr.lock); |
| if (intel_dp->psr.psr2_sel_fetch_cff_enabled) |
| return; |
| break; |
| } |
| |
| intel_de_write(display, PSR2_MAN_TRK_CTL(display, cpu_transcoder), |
| crtc_state->psr2_man_track_ctl); |
| |
| if (!crtc_state->enable_psr2_su_region_et) |
| return; |
| |
| intel_de_write(display, PIPE_SRCSZ_ERLY_TPT(crtc->pipe), |
| crtc_state->pipe_srcsz_early_tpt); |
| } |
| |
| static void psr2_man_trk_ctl_calc(struct intel_crtc_state *crtc_state, |
| bool full_update) |
| { |
| struct intel_display *display = to_intel_display(crtc_state); |
| struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc); |
| struct drm_i915_private *dev_priv = to_i915(crtc->base.dev); |
| u32 val = man_trk_ctl_enable_bit_get(display); |
| |
| /* SF partial frame enable has to be set even on full update */ |
| val |= man_trk_ctl_partial_frame_bit_get(display); |
| |
| if (full_update) { |
| val |= man_trk_ctl_single_full_frame_bit_get(display); |
| val |= man_trk_ctl_continuos_full_frame(display); |
| goto exit; |
| } |
| |
| if (crtc_state->psr2_su_area.y1 == -1) |
| goto exit; |
| |
| if (IS_ALDERLAKE_P(dev_priv) || DISPLAY_VER(display) >= 14) { |
| val |= ADLP_PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR(crtc_state->psr2_su_area.y1); |
| val |= ADLP_PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR(crtc_state->psr2_su_area.y2 - 1); |
| } else { |
| drm_WARN_ON(crtc_state->uapi.crtc->dev, |
| crtc_state->psr2_su_area.y1 % 4 || |
| crtc_state->psr2_su_area.y2 % 4); |
| |
| val |= PSR2_MAN_TRK_CTL_SU_REGION_START_ADDR( |
| crtc_state->psr2_su_area.y1 / 4 + 1); |
| val |= PSR2_MAN_TRK_CTL_SU_REGION_END_ADDR( |
| crtc_state->psr2_su_area.y2 / 4 + 1); |
| } |
| exit: |
| crtc_state->psr2_man_track_ctl = val; |
| } |
| |
| static u32 psr2_pipe_srcsz_early_tpt_calc(struct intel_crtc_state *crtc_state, |
| bool full_update) |
| { |
| int width, height; |
| |
| if (!crtc_state->enable_psr2_su_region_et || full_update) |
| return 0; |
| |
| width = drm_rect_width(&crtc_state->psr2_su_area); |
| height = drm_rect_height(&crtc_state->psr2_su_area); |
| |
| return PIPESRC_WIDTH(width - 1) | PIPESRC_HEIGHT(height - 1); |
| } |
| |
| static void clip_area_update(struct drm_rect *overlap_damage_area, |
| struct drm_rect *damage_area, |
| struct drm_rect *pipe_src) |
| { |
| if (!drm_rect_intersect(damage_area, pipe_src)) |
| return; |
| |
| if (overlap_damage_area->y1 == -1) { |
| overlap_damage_area->y1 = damage_area->y1; |
| overlap_damage_area->y2 = damage_area->y2; |
| return; |
| } |
| |
| if (damage_area->y1 < overlap_damage_area->y1) |
| overlap_damage_area->y1 = damage_area->y1; |
| |
| if (damage_area->y2 > overlap_damage_area->y2) |
| overlap_damage_area->y2 = damage_area->y2; |
| } |
| |
| static void intel_psr2_sel_fetch_pipe_alignment(struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(crtc_state); |
| struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev); |
| const struct drm_dsc_config *vdsc_cfg = &crtc_state->dsc.config; |
| u16 y_alignment; |
| |
| /* ADLP aligns the SU region to vdsc slice height in case dsc is enabled */ |
| if (crtc_state->dsc.compression_enable && |
| (IS_ALDERLAKE_P(dev_priv) || DISPLAY_VER(display) >= 14)) |
| y_alignment = vdsc_cfg->slice_height; |
| else |
| y_alignment = crtc_state->su_y_granularity; |
| |
| crtc_state->psr2_su_area.y1 -= crtc_state->psr2_su_area.y1 % y_alignment; |
| if (crtc_state->psr2_su_area.y2 % y_alignment) |
| crtc_state->psr2_su_area.y2 = ((crtc_state->psr2_su_area.y2 / |
| y_alignment) + 1) * y_alignment; |
| } |
| |
| /* |
| * When early transport is in use we need to extend SU area to cover |
| * cursor fully when cursor is in SU area. |
| */ |
| static void |
| intel_psr2_sel_fetch_et_alignment(struct intel_atomic_state *state, |
| struct intel_crtc *crtc, |
| bool *cursor_in_su_area) |
| { |
| struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); |
| struct intel_plane_state *new_plane_state; |
| struct intel_plane *plane; |
| int i; |
| |
| if (!crtc_state->enable_psr2_su_region_et) |
| return; |
| |
| for_each_new_intel_plane_in_state(state, plane, new_plane_state, i) { |
| struct drm_rect inter; |
| |
| if (new_plane_state->uapi.crtc != crtc_state->uapi.crtc) |
| continue; |
| |
| if (plane->id != PLANE_CURSOR) |
| continue; |
| |
| if (!new_plane_state->uapi.visible) |
| continue; |
| |
| inter = crtc_state->psr2_su_area; |
| if (!drm_rect_intersect(&inter, &new_plane_state->uapi.dst)) |
| continue; |
| |
| clip_area_update(&crtc_state->psr2_su_area, &new_plane_state->uapi.dst, |
| &crtc_state->pipe_src); |
| *cursor_in_su_area = true; |
| } |
| } |
| |
| /* |
| * TODO: Not clear how to handle planes with negative position, |
| * also planes are not updated if they have a negative X |
| * position so for now doing a full update in this cases |
| * |
| * Plane scaling and rotation is not supported by selective fetch and both |
| * properties can change without a modeset, so need to be check at every |
| * atomic commit. |
| */ |
| static bool psr2_sel_fetch_plane_state_supported(const struct intel_plane_state *plane_state) |
| { |
| if (plane_state->uapi.dst.y1 < 0 || |
| plane_state->uapi.dst.x1 < 0 || |
| plane_state->scaler_id >= 0 || |
| plane_state->uapi.rotation != DRM_MODE_ROTATE_0) |
| return false; |
| |
| return true; |
| } |
| |
| /* |
| * Check for pipe properties that is not supported by selective fetch. |
| * |
| * TODO: pipe scaling causes a modeset but skl_update_scaler_crtc() is executed |
| * after intel_psr_compute_config(), so for now keeping PSR2 selective fetch |
| * enabled and going to the full update path. |
| */ |
| static bool psr2_sel_fetch_pipe_state_supported(const struct intel_crtc_state *crtc_state) |
| { |
| if (crtc_state->scaler_state.scaler_id >= 0) |
| return false; |
| |
| return true; |
| } |
| |
| int intel_psr2_sel_fetch_update(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct intel_display *display = to_intel_display(state); |
| struct drm_i915_private *dev_priv = to_i915(state->base.dev); |
| struct intel_crtc_state *crtc_state = intel_atomic_get_new_crtc_state(state, crtc); |
| struct intel_plane_state *new_plane_state, *old_plane_state; |
| struct intel_plane *plane; |
| bool full_update = false, cursor_in_su_area = false; |
| int i, ret; |
| |
| if (!crtc_state->enable_psr2_sel_fetch) |
| return 0; |
| |
| if (!psr2_sel_fetch_pipe_state_supported(crtc_state)) { |
| full_update = true; |
| goto skip_sel_fetch_set_loop; |
| } |
| |
| crtc_state->psr2_su_area.x1 = 0; |
| crtc_state->psr2_su_area.y1 = -1; |
| crtc_state->psr2_su_area.x2 = drm_rect_width(&crtc_state->pipe_src); |
| crtc_state->psr2_su_area.y2 = -1; |
| |
| /* |
| * Calculate minimal selective fetch area of each plane and calculate |
| * the pipe damaged area. |
| * In the next loop the plane selective fetch area will actually be set |
| * using whole pipe damaged area. |
| */ |
| for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state, |
| new_plane_state, i) { |
| struct drm_rect src, damaged_area = { .x1 = 0, .y1 = -1, |
| .x2 = INT_MAX }; |
| |
| if (new_plane_state->uapi.crtc != crtc_state->uapi.crtc) |
| continue; |
| |
| if (!new_plane_state->uapi.visible && |
| !old_plane_state->uapi.visible) |
| continue; |
| |
| if (!psr2_sel_fetch_plane_state_supported(new_plane_state)) { |
| full_update = true; |
| break; |
| } |
| |
| /* |
| * If visibility or plane moved, mark the whole plane area as |
| * damaged as it needs to be complete redraw in the new and old |
| * position. |
| */ |
| if (new_plane_state->uapi.visible != old_plane_state->uapi.visible || |
| !drm_rect_equals(&new_plane_state->uapi.dst, |
| &old_plane_state->uapi.dst)) { |
| if (old_plane_state->uapi.visible) { |
| damaged_area.y1 = old_plane_state->uapi.dst.y1; |
| damaged_area.y2 = old_plane_state->uapi.dst.y2; |
| clip_area_update(&crtc_state->psr2_su_area, &damaged_area, |
| &crtc_state->pipe_src); |
| } |
| |
| if (new_plane_state->uapi.visible) { |
| damaged_area.y1 = new_plane_state->uapi.dst.y1; |
| damaged_area.y2 = new_plane_state->uapi.dst.y2; |
| clip_area_update(&crtc_state->psr2_su_area, &damaged_area, |
| &crtc_state->pipe_src); |
| } |
| continue; |
| } else if (new_plane_state->uapi.alpha != old_plane_state->uapi.alpha) { |
| /* If alpha changed mark the whole plane area as damaged */ |
| damaged_area.y1 = new_plane_state->uapi.dst.y1; |
| damaged_area.y2 = new_plane_state->uapi.dst.y2; |
| clip_area_update(&crtc_state->psr2_su_area, &damaged_area, |
| &crtc_state->pipe_src); |
| continue; |
| } |
| |
| src = drm_plane_state_src(&new_plane_state->uapi); |
| drm_rect_fp_to_int(&src, &src); |
| |
| if (!drm_atomic_helper_damage_merged(&old_plane_state->uapi, |
| &new_plane_state->uapi, &damaged_area)) |
| continue; |
| |
| damaged_area.y1 += new_plane_state->uapi.dst.y1 - src.y1; |
| damaged_area.y2 += new_plane_state->uapi.dst.y1 - src.y1; |
| damaged_area.x1 += new_plane_state->uapi.dst.x1 - src.x1; |
| damaged_area.x2 += new_plane_state->uapi.dst.x1 - src.x1; |
| |
| clip_area_update(&crtc_state->psr2_su_area, &damaged_area, &crtc_state->pipe_src); |
| } |
| |
| /* |
| * TODO: For now we are just using full update in case |
| * selective fetch area calculation fails. To optimize this we |
| * should identify cases where this happens and fix the area |
| * calculation for those. |
| */ |
| if (crtc_state->psr2_su_area.y1 == -1) { |
| drm_info_once(display->drm, |
| "Selective fetch area calculation failed in pipe %c\n", |
| pipe_name(crtc->pipe)); |
| full_update = true; |
| } |
| |
| if (full_update) |
| goto skip_sel_fetch_set_loop; |
| |
| /* Wa_14014971492 */ |
| if (!crtc_state->has_panel_replay && |
| ((IS_DISPLAY_VER_STEP(display, IP_VER(14, 0), STEP_A0, STEP_B0) || |
| IS_ALDERLAKE_P(dev_priv) || IS_TIGERLAKE(dev_priv))) && |
| crtc_state->splitter.enable) |
| crtc_state->psr2_su_area.y1 = 0; |
| |
| ret = drm_atomic_add_affected_planes(&state->base, &crtc->base); |
| if (ret) |
| return ret; |
| |
| /* |
| * Adjust su area to cover cursor fully as necessary (early |
| * transport). This needs to be done after |
| * drm_atomic_add_affected_planes to ensure visible cursor is added into |
| * affected planes even when cursor is not updated by itself. |
| */ |
| intel_psr2_sel_fetch_et_alignment(state, crtc, &cursor_in_su_area); |
| |
| intel_psr2_sel_fetch_pipe_alignment(crtc_state); |
| |
| /* |
| * Now that we have the pipe damaged area check if it intersect with |
| * every plane, if it does set the plane selective fetch area. |
| */ |
| for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state, |
| new_plane_state, i) { |
| struct drm_rect *sel_fetch_area, inter; |
| struct intel_plane *linked = new_plane_state->planar_linked_plane; |
| |
| if (new_plane_state->uapi.crtc != crtc_state->uapi.crtc || |
| !new_plane_state->uapi.visible) |
| continue; |
| |
| inter = crtc_state->psr2_su_area; |
| sel_fetch_area = &new_plane_state->psr2_sel_fetch_area; |
| if (!drm_rect_intersect(&inter, &new_plane_state->uapi.dst)) { |
| sel_fetch_area->y1 = -1; |
| sel_fetch_area->y2 = -1; |
| /* |
| * if plane sel fetch was previously enabled -> |
| * disable it |
| */ |
| if (drm_rect_height(&old_plane_state->psr2_sel_fetch_area) > 0) |
| crtc_state->update_planes |= BIT(plane->id); |
| |
| continue; |
| } |
| |
| if (!psr2_sel_fetch_plane_state_supported(new_plane_state)) { |
| full_update = true; |
| break; |
| } |
| |
| sel_fetch_area = &new_plane_state->psr2_sel_fetch_area; |
| sel_fetch_area->y1 = inter.y1 - new_plane_state->uapi.dst.y1; |
| sel_fetch_area->y2 = inter.y2 - new_plane_state->uapi.dst.y1; |
| crtc_state->update_planes |= BIT(plane->id); |
| |
| /* |
| * Sel_fetch_area is calculated for UV plane. Use |
| * same area for Y plane as well. |
| */ |
| if (linked) { |
| struct intel_plane_state *linked_new_plane_state; |
| struct drm_rect *linked_sel_fetch_area; |
| |
| linked_new_plane_state = intel_atomic_get_plane_state(state, linked); |
| if (IS_ERR(linked_new_plane_state)) |
| return PTR_ERR(linked_new_plane_state); |
| |
| linked_sel_fetch_area = &linked_new_plane_state->psr2_sel_fetch_area; |
| linked_sel_fetch_area->y1 = sel_fetch_area->y1; |
| linked_sel_fetch_area->y2 = sel_fetch_area->y2; |
| crtc_state->update_planes |= BIT(linked->id); |
| } |
| } |
| |
| skip_sel_fetch_set_loop: |
| psr2_man_trk_ctl_calc(crtc_state, full_update); |
| crtc_state->pipe_srcsz_early_tpt = |
| psr2_pipe_srcsz_early_tpt_calc(crtc_state, full_update); |
| return 0; |
| } |
| |
| void intel_psr_pre_plane_update(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct intel_display *display = to_intel_display(state); |
| struct drm_i915_private *i915 = to_i915(state->base.dev); |
| const struct intel_crtc_state *old_crtc_state = |
| intel_atomic_get_old_crtc_state(state, crtc); |
| const struct intel_crtc_state *new_crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct intel_encoder *encoder; |
| |
| if (!HAS_PSR(display)) |
| return; |
| |
| for_each_intel_encoder_mask_with_psr(state->base.dev, encoder, |
| old_crtc_state->uapi.encoder_mask) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct intel_psr *psr = &intel_dp->psr; |
| bool needs_to_disable = false; |
| |
| mutex_lock(&psr->lock); |
| |
| /* |
| * Reasons to disable: |
| * - PSR disabled in new state |
| * - All planes will go inactive |
| * - Changing between PSR versions |
| * - Region Early Transport changing |
| * - Display WA #1136: skl, bxt |
| */ |
| needs_to_disable |= intel_crtc_needs_modeset(new_crtc_state); |
| needs_to_disable |= !new_crtc_state->has_psr; |
| needs_to_disable |= !new_crtc_state->active_planes; |
| needs_to_disable |= new_crtc_state->has_sel_update != psr->sel_update_enabled; |
| needs_to_disable |= new_crtc_state->enable_psr2_su_region_et != |
| psr->su_region_et_enabled; |
| needs_to_disable |= DISPLAY_VER(i915) < 11 && |
| new_crtc_state->wm_level_disabled; |
| |
| if (psr->enabled && needs_to_disable) |
| intel_psr_disable_locked(intel_dp); |
| else if (psr->enabled && new_crtc_state->wm_level_disabled) |
| /* Wa_14015648006 */ |
| wm_optimization_wa(intel_dp, new_crtc_state); |
| |
| mutex_unlock(&psr->lock); |
| } |
| } |
| |
| void intel_psr_post_plane_update(struct intel_atomic_state *state, |
| struct intel_crtc *crtc) |
| { |
| struct intel_display *display = to_intel_display(state); |
| const struct intel_crtc_state *crtc_state = |
| intel_atomic_get_new_crtc_state(state, crtc); |
| struct intel_encoder *encoder; |
| |
| if (!crtc_state->has_psr) |
| return; |
| |
| for_each_intel_encoder_mask_with_psr(state->base.dev, encoder, |
| crtc_state->uapi.encoder_mask) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| struct intel_psr *psr = &intel_dp->psr; |
| bool keep_disabled = false; |
| |
| mutex_lock(&psr->lock); |
| |
| drm_WARN_ON(display->drm, |
| psr->enabled && !crtc_state->active_planes); |
| |
| keep_disabled |= psr->sink_not_reliable; |
| keep_disabled |= !crtc_state->active_planes; |
| |
| /* Display WA #1136: skl, bxt */ |
| keep_disabled |= DISPLAY_VER(display) < 11 && |
| crtc_state->wm_level_disabled; |
| |
| if (!psr->enabled && !keep_disabled) |
| intel_psr_enable_locked(intel_dp, crtc_state); |
| else if (psr->enabled && !crtc_state->wm_level_disabled) |
| /* Wa_14015648006 */ |
| wm_optimization_wa(intel_dp, crtc_state); |
| |
| /* Force a PSR exit when enabling CRC to avoid CRC timeouts */ |
| if (crtc_state->crc_enabled && psr->enabled) |
| psr_force_hw_tracking_exit(intel_dp); |
| |
| /* |
| * Clear possible busy bits in case we have |
| * invalidate -> flip -> flush sequence. |
| */ |
| intel_dp->psr.busy_frontbuffer_bits = 0; |
| |
| mutex_unlock(&psr->lock); |
| } |
| } |
| |
| static int _psr2_ready_for_pipe_update_locked(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| |
| /* |
| * Any state lower than EDP_PSR2_STATUS_STATE_DEEP_SLEEP is enough. |
| * As all higher states has bit 4 of PSR2 state set we can just wait for |
| * EDP_PSR2_STATUS_STATE_DEEP_SLEEP to be cleared. |
| */ |
| return intel_de_wait_for_clear(display, |
| EDP_PSR2_STATUS(display, cpu_transcoder), |
| EDP_PSR2_STATUS_STATE_DEEP_SLEEP, 50); |
| } |
| |
| static int _psr1_ready_for_pipe_update_locked(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| |
| /* |
| * From bspec: Panel Self Refresh (BDW+) |
| * Max. time for PSR to idle = Inverse of the refresh rate + 6 ms of |
| * exit training time + 1.5 ms of aux channel handshake. 50 ms is |
| * defensive enough to cover everything. |
| */ |
| return intel_de_wait_for_clear(display, |
| psr_status_reg(display, cpu_transcoder), |
| EDP_PSR_STATUS_STATE_MASK, 50); |
| } |
| |
| /** |
| * intel_psr_wait_for_idle_locked - wait for PSR be ready for a pipe update |
| * @new_crtc_state: new CRTC state |
| * |
| * This function is expected to be called from pipe_update_start() where it is |
| * not expected to race with PSR enable or disable. |
| */ |
| void intel_psr_wait_for_idle_locked(const struct intel_crtc_state *new_crtc_state) |
| { |
| struct intel_display *display = to_intel_display(new_crtc_state); |
| struct intel_encoder *encoder; |
| |
| if (!new_crtc_state->has_psr) |
| return; |
| |
| for_each_intel_encoder_mask_with_psr(display->drm, encoder, |
| new_crtc_state->uapi.encoder_mask) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| int ret; |
| |
| lockdep_assert_held(&intel_dp->psr.lock); |
| |
| if (!intel_dp->psr.enabled || intel_dp->psr.panel_replay_enabled) |
| continue; |
| |
| if (intel_dp->psr.sel_update_enabled) |
| ret = _psr2_ready_for_pipe_update_locked(intel_dp); |
| else |
| ret = _psr1_ready_for_pipe_update_locked(intel_dp); |
| |
| if (ret) |
| drm_err(display->drm, |
| "PSR wait timed out, atomic update may fail\n"); |
| } |
| } |
| |
| static bool __psr_wait_for_idle_locked(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| i915_reg_t reg; |
| u32 mask; |
| int err; |
| |
| if (!intel_dp->psr.enabled) |
| return false; |
| |
| if (intel_dp_is_edp(intel_dp) && (intel_dp->psr.sel_update_enabled || |
| intel_dp->psr.panel_replay_enabled)) { |
| reg = EDP_PSR2_STATUS(display, cpu_transcoder); |
| mask = EDP_PSR2_STATUS_STATE_MASK; |
| } else { |
| reg = psr_status_reg(display, cpu_transcoder); |
| mask = EDP_PSR_STATUS_STATE_MASK; |
| } |
| |
| mutex_unlock(&intel_dp->psr.lock); |
| |
| err = intel_de_wait_for_clear(display, reg, mask, 50); |
| if (err) |
| drm_err(display->drm, |
| "Timed out waiting for PSR Idle for re-enable\n"); |
| |
| /* After the unlocked wait, verify that PSR is still wanted! */ |
| mutex_lock(&intel_dp->psr.lock); |
| return err == 0 && intel_dp->psr.enabled; |
| } |
| |
| static int intel_psr_fastset_force(struct intel_display *display) |
| { |
| struct drm_connector_list_iter conn_iter; |
| struct drm_modeset_acquire_ctx ctx; |
| struct drm_atomic_state *state; |
| struct drm_connector *conn; |
| int err = 0; |
| |
| state = drm_atomic_state_alloc(display->drm); |
| if (!state) |
| return -ENOMEM; |
| |
| drm_modeset_acquire_init(&ctx, DRM_MODESET_ACQUIRE_INTERRUPTIBLE); |
| |
| state->acquire_ctx = &ctx; |
| to_intel_atomic_state(state)->internal = true; |
| |
| retry: |
| drm_connector_list_iter_begin(display->drm, &conn_iter); |
| drm_for_each_connector_iter(conn, &conn_iter) { |
| struct drm_connector_state *conn_state; |
| struct drm_crtc_state *crtc_state; |
| |
| if (conn->connector_type != DRM_MODE_CONNECTOR_eDP) |
| continue; |
| |
| conn_state = drm_atomic_get_connector_state(state, conn); |
| if (IS_ERR(conn_state)) { |
| err = PTR_ERR(conn_state); |
| break; |
| } |
| |
| if (!conn_state->crtc) |
| continue; |
| |
| crtc_state = drm_atomic_get_crtc_state(state, conn_state->crtc); |
| if (IS_ERR(crtc_state)) { |
| err = PTR_ERR(crtc_state); |
| break; |
| } |
| |
| /* Mark mode as changed to trigger a pipe->update() */ |
| crtc_state->mode_changed = true; |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| if (err == 0) |
| err = drm_atomic_commit(state); |
| |
| if (err == -EDEADLK) { |
| drm_atomic_state_clear(state); |
| err = drm_modeset_backoff(&ctx); |
| if (!err) |
| goto retry; |
| } |
| |
| drm_modeset_drop_locks(&ctx); |
| drm_modeset_acquire_fini(&ctx); |
| drm_atomic_state_put(state); |
| |
| return err; |
| } |
| |
| int intel_psr_debug_set(struct intel_dp *intel_dp, u64 val) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| const u32 mode = val & I915_PSR_DEBUG_MODE_MASK; |
| const u32 disable_bits = val & (I915_PSR_DEBUG_SU_REGION_ET_DISABLE | |
| I915_PSR_DEBUG_PANEL_REPLAY_DISABLE); |
| u32 old_mode, old_disable_bits; |
| int ret; |
| |
| if (val & ~(I915_PSR_DEBUG_IRQ | I915_PSR_DEBUG_SU_REGION_ET_DISABLE | |
| I915_PSR_DEBUG_PANEL_REPLAY_DISABLE | |
| I915_PSR_DEBUG_MODE_MASK) || |
| mode > I915_PSR_DEBUG_ENABLE_SEL_FETCH) { |
| drm_dbg_kms(display->drm, "Invalid debug mask %llx\n", val); |
| return -EINVAL; |
| } |
| |
| ret = mutex_lock_interruptible(&intel_dp->psr.lock); |
| if (ret) |
| return ret; |
| |
| old_mode = intel_dp->psr.debug & I915_PSR_DEBUG_MODE_MASK; |
| old_disable_bits = intel_dp->psr.debug & |
| (I915_PSR_DEBUG_SU_REGION_ET_DISABLE | |
| I915_PSR_DEBUG_PANEL_REPLAY_DISABLE); |
| |
| intel_dp->psr.debug = val; |
| |
| /* |
| * Do it right away if it's already enabled, otherwise it will be done |
| * when enabling the source. |
| */ |
| if (intel_dp->psr.enabled) |
| psr_irq_control(intel_dp); |
| |
| mutex_unlock(&intel_dp->psr.lock); |
| |
| if (old_mode != mode || old_disable_bits != disable_bits) |
| ret = intel_psr_fastset_force(display); |
| |
| return ret; |
| } |
| |
| static void intel_psr_handle_irq(struct intel_dp *intel_dp) |
| { |
| struct intel_psr *psr = &intel_dp->psr; |
| |
| intel_psr_disable_locked(intel_dp); |
| psr->sink_not_reliable = true; |
| /* let's make sure that sink is awaken */ |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_SET_POWER, DP_SET_POWER_D0); |
| } |
| |
| static void intel_psr_work(struct work_struct *work) |
| { |
| struct intel_dp *intel_dp = |
| container_of(work, typeof(*intel_dp), psr.work); |
| |
| mutex_lock(&intel_dp->psr.lock); |
| |
| if (!intel_dp->psr.enabled) |
| goto unlock; |
| |
| if (READ_ONCE(intel_dp->psr.irq_aux_error)) |
| intel_psr_handle_irq(intel_dp); |
| |
| /* |
| * We have to make sure PSR is ready for re-enable |
| * otherwise it keeps disabled until next full enable/disable cycle. |
| * PSR might take some time to get fully disabled |
| * and be ready for re-enable. |
| */ |
| if (!__psr_wait_for_idle_locked(intel_dp)) |
| goto unlock; |
| |
| /* |
| * The delayed work can race with an invalidate hence we need to |
| * recheck. Since psr_flush first clears this and then reschedules we |
| * won't ever miss a flush when bailing out here. |
| */ |
| if (intel_dp->psr.busy_frontbuffer_bits || intel_dp->psr.active) |
| goto unlock; |
| |
| intel_psr_activate(intel_dp); |
| unlock: |
| mutex_unlock(&intel_dp->psr.lock); |
| } |
| |
| static void _psr_invalidate_handle(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| |
| if (intel_dp->psr.psr2_sel_fetch_enabled) { |
| u32 val; |
| |
| if (intel_dp->psr.psr2_sel_fetch_cff_enabled) { |
| /* Send one update otherwise lag is observed in screen */ |
| intel_de_write(display, |
| CURSURFLIVE(display, intel_dp->psr.pipe), |
| 0); |
| return; |
| } |
| |
| val = man_trk_ctl_enable_bit_get(display) | |
| man_trk_ctl_partial_frame_bit_get(display) | |
| man_trk_ctl_continuos_full_frame(display); |
| intel_de_write(display, |
| PSR2_MAN_TRK_CTL(display, cpu_transcoder), |
| val); |
| intel_de_write(display, |
| CURSURFLIVE(display, intel_dp->psr.pipe), 0); |
| intel_dp->psr.psr2_sel_fetch_cff_enabled = true; |
| } else { |
| intel_psr_exit(intel_dp); |
| } |
| } |
| |
| /** |
| * intel_psr_invalidate - Invalidate PSR |
| * @display: display device |
| * @frontbuffer_bits: frontbuffer plane tracking bits |
| * @origin: which operation caused the invalidate |
| * |
| * Since the hardware frontbuffer tracking has gaps we need to integrate |
| * with the software frontbuffer tracking. This function gets called every |
| * time frontbuffer rendering starts and a buffer gets dirtied. PSR must be |
| * disabled if the frontbuffer mask contains a buffer relevant to PSR. |
| * |
| * Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits." |
| */ |
| void intel_psr_invalidate(struct intel_display *display, |
| unsigned frontbuffer_bits, enum fb_op_origin origin) |
| { |
| struct intel_encoder *encoder; |
| |
| if (origin == ORIGIN_FLIP) |
| return; |
| |
| for_each_intel_encoder_with_psr(display->drm, encoder) { |
| unsigned int pipe_frontbuffer_bits = frontbuffer_bits; |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| mutex_lock(&intel_dp->psr.lock); |
| if (!intel_dp->psr.enabled) { |
| mutex_unlock(&intel_dp->psr.lock); |
| continue; |
| } |
| |
| pipe_frontbuffer_bits &= |
| INTEL_FRONTBUFFER_ALL_MASK(intel_dp->psr.pipe); |
| intel_dp->psr.busy_frontbuffer_bits |= pipe_frontbuffer_bits; |
| |
| if (pipe_frontbuffer_bits) |
| _psr_invalidate_handle(intel_dp); |
| |
| mutex_unlock(&intel_dp->psr.lock); |
| } |
| } |
| /* |
| * When we will be completely rely on PSR2 S/W tracking in future, |
| * intel_psr_flush() will invalidate and flush the PSR for ORIGIN_FLIP |
| * event also therefore tgl_dc3co_flush_locked() require to be changed |
| * accordingly in future. |
| */ |
| static void |
| tgl_dc3co_flush_locked(struct intel_dp *intel_dp, unsigned int frontbuffer_bits, |
| enum fb_op_origin origin) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| |
| if (!intel_dp->psr.dc3co_exitline || !intel_dp->psr.sel_update_enabled || |
| !intel_dp->psr.active) |
| return; |
| |
| /* |
| * At every frontbuffer flush flip event modified delay of delayed work, |
| * when delayed work schedules that means display has been idle. |
| */ |
| if (!(frontbuffer_bits & |
| INTEL_FRONTBUFFER_ALL_MASK(intel_dp->psr.pipe))) |
| return; |
| |
| tgl_psr2_enable_dc3co(intel_dp); |
| mod_delayed_work(i915->unordered_wq, &intel_dp->psr.dc3co_work, |
| intel_dp->psr.dc3co_exit_delay); |
| } |
| |
| static void _psr_flush_handle(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| |
| if (intel_dp->psr.psr2_sel_fetch_enabled) { |
| if (intel_dp->psr.psr2_sel_fetch_cff_enabled) { |
| /* can we turn CFF off? */ |
| if (intel_dp->psr.busy_frontbuffer_bits == 0) { |
| u32 val = man_trk_ctl_enable_bit_get(display) | |
| man_trk_ctl_partial_frame_bit_get(display) | |
| man_trk_ctl_single_full_frame_bit_get(display) | |
| man_trk_ctl_continuos_full_frame(display); |
| |
| /* |
| * Set psr2_sel_fetch_cff_enabled as false to allow selective |
| * updates. Still keep cff bit enabled as we don't have proper |
| * SU configuration in case update is sent for any reason after |
| * sff bit gets cleared by the HW on next vblank. |
| */ |
| intel_de_write(display, |
| PSR2_MAN_TRK_CTL(display, cpu_transcoder), |
| val); |
| intel_de_write(display, |
| CURSURFLIVE(display, intel_dp->psr.pipe), |
| 0); |
| intel_dp->psr.psr2_sel_fetch_cff_enabled = false; |
| } |
| } else { |
| /* |
| * continuous full frame is disabled, only a single full |
| * frame is required |
| */ |
| psr_force_hw_tracking_exit(intel_dp); |
| } |
| } else { |
| psr_force_hw_tracking_exit(intel_dp); |
| |
| if (!intel_dp->psr.active && !intel_dp->psr.busy_frontbuffer_bits) |
| queue_work(dev_priv->unordered_wq, &intel_dp->psr.work); |
| } |
| } |
| |
| /** |
| * intel_psr_flush - Flush PSR |
| * @display: display device |
| * @frontbuffer_bits: frontbuffer plane tracking bits |
| * @origin: which operation caused the flush |
| * |
| * Since the hardware frontbuffer tracking has gaps we need to integrate |
| * with the software frontbuffer tracking. This function gets called every |
| * time frontbuffer rendering has completed and flushed out to memory. PSR |
| * can be enabled again if no other frontbuffer relevant to PSR is dirty. |
| * |
| * Dirty frontbuffers relevant to PSR are tracked in busy_frontbuffer_bits. |
| */ |
| void intel_psr_flush(struct intel_display *display, |
| unsigned frontbuffer_bits, enum fb_op_origin origin) |
| { |
| struct intel_encoder *encoder; |
| |
| for_each_intel_encoder_with_psr(display->drm, encoder) { |
| unsigned int pipe_frontbuffer_bits = frontbuffer_bits; |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| mutex_lock(&intel_dp->psr.lock); |
| if (!intel_dp->psr.enabled) { |
| mutex_unlock(&intel_dp->psr.lock); |
| continue; |
| } |
| |
| pipe_frontbuffer_bits &= |
| INTEL_FRONTBUFFER_ALL_MASK(intel_dp->psr.pipe); |
| intel_dp->psr.busy_frontbuffer_bits &= ~pipe_frontbuffer_bits; |
| |
| /* |
| * If the PSR is paused by an explicit intel_psr_paused() call, |
| * we have to ensure that the PSR is not activated until |
| * intel_psr_resume() is called. |
| */ |
| if (intel_dp->psr.paused) |
| goto unlock; |
| |
| if (origin == ORIGIN_FLIP || |
| (origin == ORIGIN_CURSOR_UPDATE && |
| !intel_dp->psr.psr2_sel_fetch_enabled)) { |
| tgl_dc3co_flush_locked(intel_dp, frontbuffer_bits, origin); |
| goto unlock; |
| } |
| |
| if (pipe_frontbuffer_bits == 0) |
| goto unlock; |
| |
| /* By definition flush = invalidate + flush */ |
| _psr_flush_handle(intel_dp); |
| unlock: |
| mutex_unlock(&intel_dp->psr.lock); |
| } |
| } |
| |
| /** |
| * intel_psr_init - Init basic PSR work and mutex. |
| * @intel_dp: Intel DP |
| * |
| * This function is called after the initializing connector. |
| * (the initializing of connector treats the handling of connector capabilities) |
| * And it initializes basic PSR stuff for each DP Encoder. |
| */ |
| void intel_psr_init(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| struct intel_connector *connector = intel_dp->attached_connector; |
| struct intel_digital_port *dig_port = dp_to_dig_port(intel_dp); |
| |
| if (!(HAS_PSR(display) || HAS_DP20(dev_priv))) |
| return; |
| |
| /* |
| * HSW spec explicitly says PSR is tied to port A. |
| * BDW+ platforms have a instance of PSR registers per transcoder but |
| * BDW, GEN9 and GEN11 are not validated by HW team in other transcoder |
| * than eDP one. |
| * For now it only supports one instance of PSR for BDW, GEN9 and GEN11. |
| * So lets keep it hardcoded to PORT_A for BDW, GEN9 and GEN11. |
| * But GEN12 supports a instance of PSR registers per transcoder. |
| */ |
| if (DISPLAY_VER(display) < 12 && dig_port->base.port != PORT_A) { |
| drm_dbg_kms(display->drm, |
| "PSR condition failed: Port not supported\n"); |
| return; |
| } |
| |
| if ((HAS_DP20(dev_priv) && !intel_dp_is_edp(intel_dp)) || |
| DISPLAY_VER(display) >= 20) |
| intel_dp->psr.source_panel_replay_support = true; |
| |
| if (HAS_PSR(display) && intel_dp_is_edp(intel_dp)) |
| intel_dp->psr.source_support = true; |
| |
| /* Set link_standby x link_off defaults */ |
| if (DISPLAY_VER(display) < 12) |
| /* For new platforms up to TGL let's respect VBT back again */ |
| intel_dp->psr.link_standby = connector->panel.vbt.psr.full_link; |
| |
| INIT_WORK(&intel_dp->psr.work, intel_psr_work); |
| INIT_DELAYED_WORK(&intel_dp->psr.dc3co_work, tgl_dc3co_disable_work); |
| mutex_init(&intel_dp->psr.lock); |
| } |
| |
| static int psr_get_status_and_error_status(struct intel_dp *intel_dp, |
| u8 *status, u8 *error_status) |
| { |
| struct drm_dp_aux *aux = &intel_dp->aux; |
| int ret; |
| unsigned int offset; |
| |
| offset = intel_dp->psr.panel_replay_enabled ? |
| DP_SINK_DEVICE_PR_AND_FRAME_LOCK_STATUS : DP_PSR_STATUS; |
| |
| ret = drm_dp_dpcd_readb(aux, offset, status); |
| if (ret != 1) |
| return ret; |
| |
| offset = intel_dp->psr.panel_replay_enabled ? |
| DP_PANEL_REPLAY_ERROR_STATUS : DP_PSR_ERROR_STATUS; |
| |
| ret = drm_dp_dpcd_readb(aux, offset, error_status); |
| if (ret != 1) |
| return ret; |
| |
| *status = *status & DP_PSR_SINK_STATE_MASK; |
| |
| return 0; |
| } |
| |
| static void psr_alpm_check(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_dp_aux *aux = &intel_dp->aux; |
| struct intel_psr *psr = &intel_dp->psr; |
| u8 val; |
| int r; |
| |
| if (!psr->sel_update_enabled) |
| return; |
| |
| r = drm_dp_dpcd_readb(aux, DP_RECEIVER_ALPM_STATUS, &val); |
| if (r != 1) { |
| drm_err(display->drm, "Error reading ALPM status\n"); |
| return; |
| } |
| |
| if (val & DP_ALPM_LOCK_TIMEOUT_ERROR) { |
| intel_psr_disable_locked(intel_dp); |
| psr->sink_not_reliable = true; |
| drm_dbg_kms(display->drm, |
| "ALPM lock timeout error, disabling PSR\n"); |
| |
| /* Clearing error */ |
| drm_dp_dpcd_writeb(aux, DP_RECEIVER_ALPM_STATUS, val); |
| } |
| } |
| |
| static void psr_capability_changed_check(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct intel_psr *psr = &intel_dp->psr; |
| u8 val; |
| int r; |
| |
| r = drm_dp_dpcd_readb(&intel_dp->aux, DP_PSR_ESI, &val); |
| if (r != 1) { |
| drm_err(display->drm, "Error reading DP_PSR_ESI\n"); |
| return; |
| } |
| |
| if (val & DP_PSR_CAPS_CHANGE) { |
| intel_psr_disable_locked(intel_dp); |
| psr->sink_not_reliable = true; |
| drm_dbg_kms(display->drm, |
| "Sink PSR capability changed, disabling PSR\n"); |
| |
| /* Clearing it */ |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_ESI, val); |
| } |
| } |
| |
| /* |
| * On common bits: |
| * DP_PSR_RFB_STORAGE_ERROR == DP_PANEL_REPLAY_RFB_STORAGE_ERROR |
| * DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR == DP_PANEL_REPLAY_VSC_SDP_UNCORRECTABLE_ERROR |
| * DP_PSR_LINK_CRC_ERROR == DP_PANEL_REPLAY_LINK_CRC_ERROR |
| * this function is relying on PSR definitions |
| */ |
| void intel_psr_short_pulse(struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct intel_psr *psr = &intel_dp->psr; |
| u8 status, error_status; |
| const u8 errors = DP_PSR_RFB_STORAGE_ERROR | |
| DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR | |
| DP_PSR_LINK_CRC_ERROR; |
| |
| if (!CAN_PSR(intel_dp) && !CAN_PANEL_REPLAY(intel_dp)) |
| return; |
| |
| mutex_lock(&psr->lock); |
| |
| if (!psr->enabled) |
| goto exit; |
| |
| if (psr_get_status_and_error_status(intel_dp, &status, &error_status)) { |
| drm_err(display->drm, |
| "Error reading PSR status or error status\n"); |
| goto exit; |
| } |
| |
| if ((!psr->panel_replay_enabled && status == DP_PSR_SINK_INTERNAL_ERROR) || |
| (error_status & errors)) { |
| intel_psr_disable_locked(intel_dp); |
| psr->sink_not_reliable = true; |
| } |
| |
| if (!psr->panel_replay_enabled && status == DP_PSR_SINK_INTERNAL_ERROR && |
| !error_status) |
| drm_dbg_kms(display->drm, |
| "PSR sink internal error, disabling PSR\n"); |
| if (error_status & DP_PSR_RFB_STORAGE_ERROR) |
| drm_dbg_kms(display->drm, |
| "PSR RFB storage error, disabling PSR\n"); |
| if (error_status & DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR) |
| drm_dbg_kms(display->drm, |
| "PSR VSC SDP uncorrectable error, disabling PSR\n"); |
| if (error_status & DP_PSR_LINK_CRC_ERROR) |
| drm_dbg_kms(display->drm, |
| "PSR Link CRC error, disabling PSR\n"); |
| |
| if (error_status & ~errors) |
| drm_err(display->drm, |
| "PSR_ERROR_STATUS unhandled errors %x\n", |
| error_status & ~errors); |
| /* clear status register */ |
| drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_ERROR_STATUS, error_status); |
| |
| if (!psr->panel_replay_enabled) { |
| psr_alpm_check(intel_dp); |
| psr_capability_changed_check(intel_dp); |
| } |
| |
| exit: |
| mutex_unlock(&psr->lock); |
| } |
| |
| bool intel_psr_enabled(struct intel_dp *intel_dp) |
| { |
| bool ret; |
| |
| if (!CAN_PSR(intel_dp)) |
| return false; |
| |
| mutex_lock(&intel_dp->psr.lock); |
| ret = intel_dp->psr.enabled; |
| mutex_unlock(&intel_dp->psr.lock); |
| |
| return ret; |
| } |
| |
| /** |
| * intel_psr_lock - grab PSR lock |
| * @crtc_state: the crtc state |
| * |
| * This is initially meant to be used by around CRTC update, when |
| * vblank sensitive registers are updated and we need grab the lock |
| * before it to avoid vblank evasion. |
| */ |
| void intel_psr_lock(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(crtc_state); |
| struct intel_encoder *encoder; |
| |
| if (!crtc_state->has_psr) |
| return; |
| |
| for_each_intel_encoder_mask_with_psr(display->drm, encoder, |
| crtc_state->uapi.encoder_mask) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| mutex_lock(&intel_dp->psr.lock); |
| break; |
| } |
| } |
| |
| /** |
| * intel_psr_unlock - release PSR lock |
| * @crtc_state: the crtc state |
| * |
| * Release the PSR lock that was held during pipe update. |
| */ |
| void intel_psr_unlock(const struct intel_crtc_state *crtc_state) |
| { |
| struct intel_display *display = to_intel_display(crtc_state); |
| struct intel_encoder *encoder; |
| |
| if (!crtc_state->has_psr) |
| return; |
| |
| for_each_intel_encoder_mask_with_psr(display->drm, encoder, |
| crtc_state->uapi.encoder_mask) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| mutex_unlock(&intel_dp->psr.lock); |
| break; |
| } |
| } |
| |
| static void |
| psr_source_status(struct intel_dp *intel_dp, struct seq_file *m) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| const char *status = "unknown"; |
| u32 val, status_val; |
| |
| if (intel_dp_is_edp(intel_dp) && (intel_dp->psr.sel_update_enabled || |
| intel_dp->psr.panel_replay_enabled)) { |
| static const char * const live_status[] = { |
| "IDLE", |
| "CAPTURE", |
| "CAPTURE_FS", |
| "SLEEP", |
| "BUFON_FW", |
| "ML_UP", |
| "SU_STANDBY", |
| "FAST_SLEEP", |
| "DEEP_SLEEP", |
| "BUF_ON", |
| "TG_ON" |
| }; |
| val = intel_de_read(display, |
| EDP_PSR2_STATUS(display, cpu_transcoder)); |
| status_val = REG_FIELD_GET(EDP_PSR2_STATUS_STATE_MASK, val); |
| if (status_val < ARRAY_SIZE(live_status)) |
| status = live_status[status_val]; |
| } else { |
| static const char * const live_status[] = { |
| "IDLE", |
| "SRDONACK", |
| "SRDENT", |
| "BUFOFF", |
| "BUFON", |
| "AUXACK", |
| "SRDOFFACK", |
| "SRDENT_ON", |
| }; |
| val = intel_de_read(display, |
| psr_status_reg(display, cpu_transcoder)); |
| status_val = REG_FIELD_GET(EDP_PSR_STATUS_STATE_MASK, val); |
| if (status_val < ARRAY_SIZE(live_status)) |
| status = live_status[status_val]; |
| } |
| |
| seq_printf(m, "Source PSR/PanelReplay status: %s [0x%08x]\n", status, val); |
| } |
| |
| static void intel_psr_sink_capability(struct intel_dp *intel_dp, |
| struct seq_file *m) |
| { |
| struct intel_psr *psr = &intel_dp->psr; |
| |
| seq_printf(m, "Sink support: PSR = %s", |
| str_yes_no(psr->sink_support)); |
| |
| if (psr->sink_support) |
| seq_printf(m, " [0x%02x]", intel_dp->psr_dpcd[0]); |
| if (intel_dp->psr_dpcd[0] == DP_PSR2_WITH_Y_COORD_ET_SUPPORTED) |
| seq_printf(m, " (Early Transport)"); |
| seq_printf(m, ", Panel Replay = %s", str_yes_no(psr->sink_panel_replay_support)); |
| seq_printf(m, ", Panel Replay Selective Update = %s", |
| str_yes_no(psr->sink_panel_replay_su_support)); |
| if (intel_dp->pr_dpcd & DP_PANEL_REPLAY_EARLY_TRANSPORT_SUPPORT) |
| seq_printf(m, " (Early Transport)"); |
| seq_printf(m, "\n"); |
| } |
| |
| static void intel_psr_print_mode(struct intel_dp *intel_dp, |
| struct seq_file *m) |
| { |
| struct intel_psr *psr = &intel_dp->psr; |
| const char *status, *mode, *region_et; |
| |
| if (psr->enabled) |
| status = " enabled"; |
| else |
| status = "disabled"; |
| |
| if (psr->panel_replay_enabled && psr->sel_update_enabled) |
| mode = "Panel Replay Selective Update"; |
| else if (psr->panel_replay_enabled) |
| mode = "Panel Replay"; |
| else if (psr->sel_update_enabled) |
| mode = "PSR2"; |
| else if (psr->enabled) |
| mode = "PSR1"; |
| else |
| mode = ""; |
| |
| if (psr->su_region_et_enabled) |
| region_et = " (Early Transport)"; |
| else |
| region_et = ""; |
| |
| seq_printf(m, "PSR mode: %s%s%s\n", mode, status, region_et); |
| } |
| |
| static int intel_psr_status(struct seq_file *m, struct intel_dp *intel_dp) |
| { |
| struct intel_display *display = to_intel_display(intel_dp); |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| enum transcoder cpu_transcoder = intel_dp->psr.transcoder; |
| struct intel_psr *psr = &intel_dp->psr; |
| intel_wakeref_t wakeref; |
| bool enabled; |
| u32 val, psr2_ctl; |
| |
| intel_psr_sink_capability(intel_dp, m); |
| |
| if (!(psr->sink_support || psr->sink_panel_replay_support)) |
| return 0; |
| |
| wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm); |
| mutex_lock(&psr->lock); |
| |
| intel_psr_print_mode(intel_dp, m); |
| |
| if (!psr->enabled) { |
| seq_printf(m, "PSR sink not reliable: %s\n", |
| str_yes_no(psr->sink_not_reliable)); |
| |
| goto unlock; |
| } |
| |
| if (psr->panel_replay_enabled) { |
| val = intel_de_read(display, TRANS_DP2_CTL(cpu_transcoder)); |
| |
| if (intel_dp_is_edp(intel_dp)) |
| psr2_ctl = intel_de_read(display, |
| EDP_PSR2_CTL(display, |
| cpu_transcoder)); |
| |
| enabled = val & TRANS_DP2_PANEL_REPLAY_ENABLE; |
| } else if (psr->sel_update_enabled) { |
| val = intel_de_read(display, |
| EDP_PSR2_CTL(display, cpu_transcoder)); |
| enabled = val & EDP_PSR2_ENABLE; |
| } else { |
| val = intel_de_read(display, psr_ctl_reg(display, cpu_transcoder)); |
| enabled = val & EDP_PSR_ENABLE; |
| } |
| seq_printf(m, "Source PSR/PanelReplay ctl: %s [0x%08x]\n", |
| str_enabled_disabled(enabled), val); |
| if (psr->panel_replay_enabled && intel_dp_is_edp(intel_dp)) |
| seq_printf(m, "PSR2_CTL: 0x%08x\n", |
| psr2_ctl); |
| psr_source_status(intel_dp, m); |
| seq_printf(m, "Busy frontbuffer bits: 0x%08x\n", |
| psr->busy_frontbuffer_bits); |
| |
| /* |
| * SKL+ Perf counter is reset to 0 everytime DC state is entered |
| */ |
| val = intel_de_read(display, psr_perf_cnt_reg(display, cpu_transcoder)); |
| seq_printf(m, "Performance counter: %u\n", |
| REG_FIELD_GET(EDP_PSR_PERF_CNT_MASK, val)); |
| |
| if (psr->debug & I915_PSR_DEBUG_IRQ) { |
| seq_printf(m, "Last attempted entry at: %lld\n", |
| psr->last_entry_attempt); |
| seq_printf(m, "Last exit at: %lld\n", psr->last_exit); |
| } |
| |
| if (psr->sel_update_enabled) { |
| u32 su_frames_val[3]; |
| int frame; |
| |
| /* |
| * Reading all 3 registers before hand to minimize crossing a |
| * frame boundary between register reads |
| */ |
| for (frame = 0; frame < PSR2_SU_STATUS_FRAMES; frame += 3) { |
| val = intel_de_read(display, |
| PSR2_SU_STATUS(display, cpu_transcoder, frame)); |
| su_frames_val[frame / 3] = val; |
| } |
| |
| seq_puts(m, "Frame:\tPSR2 SU blocks:\n"); |
| |
| for (frame = 0; frame < PSR2_SU_STATUS_FRAMES; frame++) { |
| u32 su_blocks; |
| |
| su_blocks = su_frames_val[frame / 3] & |
| PSR2_SU_STATUS_MASK(frame); |
| su_blocks = su_blocks >> PSR2_SU_STATUS_SHIFT(frame); |
| seq_printf(m, "%d\t%d\n", frame, su_blocks); |
| } |
| |
| seq_printf(m, "PSR2 selective fetch: %s\n", |
| str_enabled_disabled(psr->psr2_sel_fetch_enabled)); |
| } |
| |
| unlock: |
| mutex_unlock(&psr->lock); |
| intel_runtime_pm_put(&dev_priv->runtime_pm, wakeref); |
| |
| return 0; |
| } |
| |
| static int i915_edp_psr_status_show(struct seq_file *m, void *data) |
| { |
| struct intel_display *display = m->private; |
| struct intel_dp *intel_dp = NULL; |
| struct intel_encoder *encoder; |
| |
| if (!HAS_PSR(display)) |
| return -ENODEV; |
| |
| /* Find the first EDP which supports PSR */ |
| for_each_intel_encoder_with_psr(display->drm, encoder) { |
| intel_dp = enc_to_intel_dp(encoder); |
| break; |
| } |
| |
| if (!intel_dp) |
| return -ENODEV; |
| |
| return intel_psr_status(m, intel_dp); |
| } |
| DEFINE_SHOW_ATTRIBUTE(i915_edp_psr_status); |
| |
| static int |
| i915_edp_psr_debug_set(void *data, u64 val) |
| { |
| struct intel_display *display = data; |
| struct drm_i915_private *dev_priv = to_i915(display->drm); |
| struct intel_encoder *encoder; |
| intel_wakeref_t wakeref; |
| int ret = -ENODEV; |
| |
| if (!HAS_PSR(display)) |
| return ret; |
| |
| for_each_intel_encoder_with_psr(display->drm, encoder) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| drm_dbg_kms(display->drm, "Setting PSR debug to %llx\n", val); |
| |
| wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm); |
| |
| // TODO: split to each transcoder's PSR debug state |
| ret = intel_psr_debug_set(intel_dp, val); |
| |
| intel_runtime_pm_put(&dev_priv->runtime_pm, wakeref); |
| } |
| |
| return ret; |
| } |
| |
| static int |
| i915_edp_psr_debug_get(void *data, u64 *val) |
| { |
| struct intel_display *display = data; |
| struct intel_encoder *encoder; |
| |
| if (!HAS_PSR(display)) |
| return -ENODEV; |
| |
| for_each_intel_encoder_with_psr(display->drm, encoder) { |
| struct intel_dp *intel_dp = enc_to_intel_dp(encoder); |
| |
| // TODO: split to each transcoder's PSR debug state |
| *val = READ_ONCE(intel_dp->psr.debug); |
| return 0; |
| } |
| |
| return -ENODEV; |
| } |
| |
| DEFINE_SIMPLE_ATTRIBUTE(i915_edp_psr_debug_fops, |
| i915_edp_psr_debug_get, i915_edp_psr_debug_set, |
| "%llu\n"); |
| |
| void intel_psr_debugfs_register(struct intel_display *display) |
| { |
| struct drm_minor *minor = display->drm->primary; |
| |
| debugfs_create_file("i915_edp_psr_debug", 0644, minor->debugfs_root, |
| display, &i915_edp_psr_debug_fops); |
| |
| debugfs_create_file("i915_edp_psr_status", 0444, minor->debugfs_root, |
| display, &i915_edp_psr_status_fops); |
| } |
| |
| static const char *psr_mode_str(struct intel_dp *intel_dp) |
| { |
| if (intel_dp->psr.panel_replay_enabled) |
| return "PANEL-REPLAY"; |
| else if (intel_dp->psr.enabled) |
| return "PSR"; |
| |
| return "unknown"; |
| } |
| |
| static int i915_psr_sink_status_show(struct seq_file *m, void *data) |
| { |
| struct intel_connector *connector = m->private; |
| struct intel_dp *intel_dp = intel_attached_dp(connector); |
| static const char * const sink_status[] = { |
| "inactive", |
| "transition to active, capture and display", |
| "active, display from RFB", |
| "active, capture and display on sink device timings", |
| "transition to inactive, capture and display, timing re-sync", |
| "reserved", |
| "reserved", |
| "sink internal error", |
| }; |
| const char *str; |
| int ret; |
| u8 status, error_status; |
| |
| if (!(CAN_PSR(intel_dp) || CAN_PANEL_REPLAY(intel_dp))) { |
| seq_puts(m, "PSR/Panel-Replay Unsupported\n"); |
| return -ENODEV; |
| } |
| |
| if (connector->base.status != connector_status_connected) |
| return -ENODEV; |
| |
| ret = psr_get_status_and_error_status(intel_dp, &status, &error_status); |
| if (ret) |
| return ret; |
| |
| status &= DP_PSR_SINK_STATE_MASK; |
| if (status < ARRAY_SIZE(sink_status)) |
| str = sink_status[status]; |
| else |
| str = "unknown"; |
| |
| seq_printf(m, "Sink %s status: 0x%x [%s]\n", psr_mode_str(intel_dp), status, str); |
| |
| seq_printf(m, "Sink %s error status: 0x%x", psr_mode_str(intel_dp), error_status); |
| |
| if (error_status & (DP_PSR_RFB_STORAGE_ERROR | |
| DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR | |
| DP_PSR_LINK_CRC_ERROR)) |
| seq_puts(m, ":\n"); |
| else |
| seq_puts(m, "\n"); |
| if (error_status & DP_PSR_RFB_STORAGE_ERROR) |
| seq_printf(m, "\t%s RFB storage error\n", psr_mode_str(intel_dp)); |
| if (error_status & DP_PSR_VSC_SDP_UNCORRECTABLE_ERROR) |
| seq_printf(m, "\t%s VSC SDP uncorrectable error\n", psr_mode_str(intel_dp)); |
| if (error_status & DP_PSR_LINK_CRC_ERROR) |
| seq_printf(m, "\t%s Link CRC error\n", psr_mode_str(intel_dp)); |
| |
| return ret; |
| } |
| DEFINE_SHOW_ATTRIBUTE(i915_psr_sink_status); |
| |
| static int i915_psr_status_show(struct seq_file *m, void *data) |
| { |
| struct intel_connector *connector = m->private; |
| struct intel_dp *intel_dp = intel_attached_dp(connector); |
| |
| return intel_psr_status(m, intel_dp); |
| } |
| DEFINE_SHOW_ATTRIBUTE(i915_psr_status); |
| |
| void intel_psr_connector_debugfs_add(struct intel_connector *connector) |
| { |
| struct intel_display *display = to_intel_display(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct dentry *root = connector->base.debugfs_entry; |
| |
| /* TODO: Add support for MST connectors as well. */ |
| if ((connector->base.connector_type != DRM_MODE_CONNECTOR_eDP && |
| connector->base.connector_type != DRM_MODE_CONNECTOR_DisplayPort) || |
| connector->mst_port) |
| return; |
| |
| debugfs_create_file("i915_psr_sink_status", 0444, root, |
| connector, &i915_psr_sink_status_fops); |
| |
| if (HAS_PSR(display) || HAS_DP20(i915)) |
| debugfs_create_file("i915_psr_status", 0444, root, |
| connector, &i915_psr_status_fops); |
| } |