| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright (c) 2015-2018, 2020-2021 The Linux Foundation. All rights reserved. |
| */ |
| |
| #define pr_fmt(fmt) "[drm:%s:%d] " fmt, __func__, __LINE__ |
| #include "dpu_encoder_phys.h" |
| #include "dpu_hw_interrupts.h" |
| #include "dpu_hw_merge3d.h" |
| #include "dpu_core_irq.h" |
| #include "dpu_formats.h" |
| #include "dpu_trace.h" |
| #include "disp/msm_disp_snapshot.h" |
| |
| #include <drm/display/drm_dsc_helper.h> |
| #include <drm/drm_managed.h> |
| |
| #define DPU_DEBUG_VIDENC(e, fmt, ...) DPU_DEBUG("enc%d intf%d " fmt, \ |
| (e) && (e)->parent ? \ |
| (e)->parent->base.id : -1, \ |
| (e) && (e)->hw_intf ? \ |
| (e)->hw_intf->idx - INTF_0 : -1, ##__VA_ARGS__) |
| |
| #define DPU_ERROR_VIDENC(e, fmt, ...) DPU_ERROR("enc%d intf%d " fmt, \ |
| (e) && (e)->parent ? \ |
| (e)->parent->base.id : -1, \ |
| (e) && (e)->hw_intf ? \ |
| (e)->hw_intf->idx - INTF_0 : -1, ##__VA_ARGS__) |
| |
| #define to_dpu_encoder_phys_vid(x) \ |
| container_of(x, struct dpu_encoder_phys_vid, base) |
| |
| static bool dpu_encoder_phys_vid_is_master( |
| struct dpu_encoder_phys *phys_enc) |
| { |
| bool ret = false; |
| |
| if (phys_enc->split_role != ENC_ROLE_SLAVE) |
| ret = true; |
| |
| return ret; |
| } |
| |
| static void drm_mode_to_intf_timing_params( |
| const struct dpu_encoder_phys *phys_enc, |
| const struct drm_display_mode *mode, |
| struct dpu_hw_intf_timing_params *timing) |
| { |
| memset(timing, 0, sizeof(*timing)); |
| |
| if ((mode->htotal < mode->hsync_end) |
| || (mode->hsync_start < mode->hdisplay) |
| || (mode->vtotal < mode->vsync_end) |
| || (mode->vsync_start < mode->vdisplay) |
| || (mode->hsync_end < mode->hsync_start) |
| || (mode->vsync_end < mode->vsync_start)) { |
| DPU_ERROR( |
| "invalid params - hstart:%d,hend:%d,htot:%d,hdisplay:%d\n", |
| mode->hsync_start, mode->hsync_end, |
| mode->htotal, mode->hdisplay); |
| DPU_ERROR("vstart:%d,vend:%d,vtot:%d,vdisplay:%d\n", |
| mode->vsync_start, mode->vsync_end, |
| mode->vtotal, mode->vdisplay); |
| return; |
| } |
| |
| /* |
| * https://www.kernel.org/doc/htmldocs/drm/ch02s05.html |
| * Active Region Front Porch Sync Back Porch |
| * <-----------------><------------><-----><-----------> |
| * <- [hv]display ---> |
| * <--------- [hv]sync_start ------> |
| * <----------------- [hv]sync_end -------> |
| * <---------------------------- [hv]total -------------> |
| */ |
| timing->width = mode->hdisplay; /* active width */ |
| timing->height = mode->vdisplay; /* active height */ |
| timing->xres = timing->width; |
| timing->yres = timing->height; |
| timing->h_back_porch = mode->htotal - mode->hsync_end; |
| timing->h_front_porch = mode->hsync_start - mode->hdisplay; |
| timing->v_back_porch = mode->vtotal - mode->vsync_end; |
| timing->v_front_porch = mode->vsync_start - mode->vdisplay; |
| timing->hsync_pulse_width = mode->hsync_end - mode->hsync_start; |
| timing->vsync_pulse_width = mode->vsync_end - mode->vsync_start; |
| timing->hsync_polarity = (mode->flags & DRM_MODE_FLAG_NHSYNC) ? 1 : 0; |
| timing->vsync_polarity = (mode->flags & DRM_MODE_FLAG_NVSYNC) ? 1 : 0; |
| timing->border_clr = 0; |
| timing->underflow_clr = 0xff; |
| timing->hsync_skew = mode->hskew; |
| |
| /* DSI controller cannot handle active-low sync signals. */ |
| if (phys_enc->hw_intf->cap->type == INTF_DSI) { |
| timing->hsync_polarity = 0; |
| timing->vsync_polarity = 0; |
| } |
| |
| /* for DP/EDP, Shift timings to align it to bottom right */ |
| if (phys_enc->hw_intf->cap->type == INTF_DP) { |
| timing->h_back_porch += timing->h_front_porch; |
| timing->h_front_porch = 0; |
| timing->v_back_porch += timing->v_front_porch; |
| timing->v_front_porch = 0; |
| } |
| |
| timing->wide_bus_en = dpu_encoder_is_widebus_enabled(phys_enc->parent); |
| timing->compression_en = dpu_encoder_is_dsc_enabled(phys_enc->parent); |
| |
| /* |
| * for DP, divide the horizonal parameters by 2 when |
| * widebus is enabled |
| */ |
| if (phys_enc->hw_intf->cap->type == INTF_DP && timing->wide_bus_en) { |
| timing->width = timing->width >> 1; |
| timing->xres = timing->xres >> 1; |
| timing->h_back_porch = timing->h_back_porch >> 1; |
| timing->h_front_porch = timing->h_front_porch >> 1; |
| timing->hsync_pulse_width = timing->hsync_pulse_width >> 1; |
| } |
| |
| /* |
| * for DSI, if compression is enabled, then divide the horizonal active |
| * timing parameters by compression ratio. bits of 3 components(R/G/B) |
| * is compressed into bits of 1 pixel. |
| */ |
| if (phys_enc->hw_intf->cap->type != INTF_DP && timing->compression_en) { |
| struct drm_dsc_config *dsc = |
| dpu_encoder_get_dsc_config(phys_enc->parent); |
| /* |
| * TODO: replace drm_dsc_get_bpp_int with logic to handle |
| * fractional part if there is fraction |
| */ |
| timing->width = timing->width * drm_dsc_get_bpp_int(dsc) / |
| (dsc->bits_per_component * 3); |
| timing->xres = timing->width; |
| } |
| } |
| |
| static u32 get_horizontal_total(const struct dpu_hw_intf_timing_params *timing) |
| { |
| u32 active = timing->xres; |
| u32 inactive = |
| timing->h_back_porch + timing->h_front_porch + |
| timing->hsync_pulse_width; |
| return active + inactive; |
| } |
| |
| static u32 get_vertical_total(const struct dpu_hw_intf_timing_params *timing) |
| { |
| u32 active = timing->yres; |
| u32 inactive = |
| timing->v_back_porch + timing->v_front_porch + |
| timing->vsync_pulse_width; |
| return active + inactive; |
| } |
| |
| /* |
| * programmable_fetch_get_num_lines: |
| * Number of fetch lines in vertical front porch |
| * @timing: Pointer to the intf timing information for the requested mode |
| * |
| * Returns the number of fetch lines in vertical front porch at which mdp |
| * can start fetching the next frame. |
| * |
| * Number of needed prefetch lines is anything that cannot be absorbed in the |
| * start of frame time (back porch + vsync pulse width). |
| * |
| * Some panels have very large VFP, however we only need a total number of |
| * lines based on the chip worst case latencies. |
| */ |
| static u32 programmable_fetch_get_num_lines( |
| struct dpu_encoder_phys *phys_enc, |
| const struct dpu_hw_intf_timing_params *timing) |
| { |
| u32 worst_case_needed_lines = |
| phys_enc->hw_intf->cap->prog_fetch_lines_worst_case; |
| u32 start_of_frame_lines = |
| timing->v_back_porch + timing->vsync_pulse_width; |
| u32 needed_vfp_lines = worst_case_needed_lines - start_of_frame_lines; |
| u32 actual_vfp_lines = 0; |
| |
| /* Fetch must be outside active lines, otherwise undefined. */ |
| if (start_of_frame_lines >= worst_case_needed_lines) { |
| DPU_DEBUG_VIDENC(phys_enc, |
| "prog fetch is not needed, large vbp+vsw\n"); |
| actual_vfp_lines = 0; |
| } else if (timing->v_front_porch < needed_vfp_lines) { |
| /* Warn fetch needed, but not enough porch in panel config */ |
| pr_warn_once |
| ("low vbp+vfp may lead to perf issues in some cases\n"); |
| DPU_DEBUG_VIDENC(phys_enc, |
| "less vfp than fetch req, using entire vfp\n"); |
| actual_vfp_lines = timing->v_front_porch; |
| } else { |
| DPU_DEBUG_VIDENC(phys_enc, "room in vfp for needed prefetch\n"); |
| actual_vfp_lines = needed_vfp_lines; |
| } |
| |
| DPU_DEBUG_VIDENC(phys_enc, |
| "v_front_porch %u v_back_porch %u vsync_pulse_width %u\n", |
| timing->v_front_porch, timing->v_back_porch, |
| timing->vsync_pulse_width); |
| DPU_DEBUG_VIDENC(phys_enc, |
| "wc_lines %u needed_vfp_lines %u actual_vfp_lines %u\n", |
| worst_case_needed_lines, needed_vfp_lines, actual_vfp_lines); |
| |
| return actual_vfp_lines; |
| } |
| |
| /* |
| * programmable_fetch_config: Programs HW to prefetch lines by offsetting |
| * the start of fetch into the vertical front porch for cases where the |
| * vsync pulse width and vertical back porch time is insufficient |
| * |
| * Gets # of lines to pre-fetch, then calculate VSYNC counter value. |
| * HW layer requires VSYNC counter of first pixel of tgt VFP line. |
| * |
| * @timing: Pointer to the intf timing information for the requested mode |
| */ |
| static void programmable_fetch_config(struct dpu_encoder_phys *phys_enc, |
| const struct dpu_hw_intf_timing_params *timing) |
| { |
| struct dpu_hw_intf_prog_fetch f = { 0 }; |
| u32 vfp_fetch_lines = 0; |
| u32 horiz_total = 0; |
| u32 vert_total = 0; |
| u32 vfp_fetch_start_vsync_counter = 0; |
| unsigned long lock_flags; |
| |
| if (WARN_ON_ONCE(!phys_enc->hw_intf->ops.setup_prg_fetch)) |
| return; |
| |
| vfp_fetch_lines = programmable_fetch_get_num_lines(phys_enc, timing); |
| if (vfp_fetch_lines) { |
| vert_total = get_vertical_total(timing); |
| horiz_total = get_horizontal_total(timing); |
| vfp_fetch_start_vsync_counter = |
| (vert_total - vfp_fetch_lines) * horiz_total + 1; |
| f.enable = 1; |
| f.fetch_start = vfp_fetch_start_vsync_counter; |
| } |
| |
| DPU_DEBUG_VIDENC(phys_enc, |
| "vfp_fetch_lines %u vfp_fetch_start_vsync_counter %u\n", |
| vfp_fetch_lines, vfp_fetch_start_vsync_counter); |
| |
| spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags); |
| phys_enc->hw_intf->ops.setup_prg_fetch(phys_enc->hw_intf, &f); |
| spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags); |
| } |
| |
| static void dpu_encoder_phys_vid_setup_timing_engine( |
| struct dpu_encoder_phys *phys_enc) |
| { |
| struct drm_display_mode mode; |
| struct dpu_hw_intf_timing_params timing_params = { 0 }; |
| const struct msm_format *fmt = NULL; |
| u32 fmt_fourcc; |
| unsigned long lock_flags; |
| struct dpu_hw_intf_cfg intf_cfg = { 0 }; |
| |
| drm_mode_init(&mode, &phys_enc->cached_mode); |
| |
| if (!phys_enc->hw_ctl->ops.setup_intf_cfg) { |
| DPU_ERROR("invalid encoder %d\n", phys_enc != NULL); |
| return; |
| } |
| |
| if (!phys_enc->hw_intf->ops.setup_timing_gen) { |
| DPU_ERROR("timing engine setup is not supported\n"); |
| return; |
| } |
| |
| DPU_DEBUG_VIDENC(phys_enc, "enabling mode:\n"); |
| drm_mode_debug_printmodeline(&mode); |
| |
| fmt_fourcc = dpu_encoder_get_drm_fmt(phys_enc); |
| |
| if (phys_enc->split_role != ENC_ROLE_SOLO || fmt_fourcc == DRM_FORMAT_YUV420) { |
| mode.hdisplay >>= 1; |
| mode.htotal >>= 1; |
| mode.hsync_start >>= 1; |
| mode.hsync_end >>= 1; |
| mode.hskew >>= 1; |
| |
| DPU_DEBUG_VIDENC(phys_enc, |
| "split_role %d, halve horizontal %d %d %d %d %d\n", |
| phys_enc->split_role, |
| mode.hdisplay, mode.htotal, |
| mode.hsync_start, mode.hsync_end, |
| mode.hskew); |
| } |
| |
| drm_mode_to_intf_timing_params(phys_enc, &mode, &timing_params); |
| |
| fmt = mdp_get_format(&phys_enc->dpu_kms->base, fmt_fourcc, 0); |
| DPU_DEBUG_VIDENC(phys_enc, "fmt_fourcc 0x%X\n", fmt_fourcc); |
| |
| if (phys_enc->hw_cdm) |
| intf_cfg.cdm = phys_enc->hw_cdm->idx; |
| intf_cfg.intf = phys_enc->hw_intf->idx; |
| intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_VID; |
| intf_cfg.stream_sel = 0; /* Don't care value for video mode */ |
| intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc); |
| intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc); |
| if (intf_cfg.mode_3d && phys_enc->hw_pp->merge_3d) |
| intf_cfg.merge_3d = phys_enc->hw_pp->merge_3d->idx; |
| |
| spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags); |
| phys_enc->hw_intf->ops.setup_timing_gen(phys_enc->hw_intf, |
| &timing_params, fmt, |
| phys_enc->dpu_kms->catalog->mdss_ver); |
| phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, &intf_cfg); |
| |
| /* setup which pp blk will connect to this intf */ |
| if (phys_enc->hw_intf->ops.bind_pingpong_blk) |
| phys_enc->hw_intf->ops.bind_pingpong_blk( |
| phys_enc->hw_intf, |
| phys_enc->hw_pp->idx); |
| |
| if (phys_enc->hw_pp->merge_3d) |
| phys_enc->hw_pp->merge_3d->ops.setup_3d_mode(phys_enc->hw_pp->merge_3d, intf_cfg.mode_3d); |
| |
| spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags); |
| |
| programmable_fetch_config(phys_enc, &timing_params); |
| } |
| |
| static void dpu_encoder_phys_vid_vblank_irq(void *arg) |
| { |
| struct dpu_encoder_phys *phys_enc = arg; |
| struct dpu_hw_ctl *hw_ctl; |
| unsigned long lock_flags; |
| u32 flush_register = 0; |
| |
| hw_ctl = phys_enc->hw_ctl; |
| |
| DPU_ATRACE_BEGIN("vblank_irq"); |
| |
| dpu_encoder_vblank_callback(phys_enc->parent, phys_enc); |
| |
| atomic_read(&phys_enc->pending_kickoff_cnt); |
| |
| /* |
| * only decrement the pending flush count if we've actually flushed |
| * hardware. due to sw irq latency, vblank may have already happened |
| * so we need to double-check with hw that it accepted the flush bits |
| */ |
| spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags); |
| if (hw_ctl->ops.get_flush_register) |
| flush_register = hw_ctl->ops.get_flush_register(hw_ctl); |
| |
| if (!(flush_register & hw_ctl->ops.get_pending_flush(hw_ctl))) |
| atomic_add_unless(&phys_enc->pending_kickoff_cnt, -1, 0); |
| spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags); |
| |
| /* Signal any waiting atomic commit thread */ |
| wake_up_all(&phys_enc->pending_kickoff_wq); |
| |
| dpu_encoder_frame_done_callback(phys_enc->parent, phys_enc, |
| DPU_ENCODER_FRAME_EVENT_DONE); |
| |
| DPU_ATRACE_END("vblank_irq"); |
| } |
| |
| static void dpu_encoder_phys_vid_underrun_irq(void *arg) |
| { |
| struct dpu_encoder_phys *phys_enc = arg; |
| |
| dpu_encoder_underrun_callback(phys_enc->parent, phys_enc); |
| } |
| |
| static bool dpu_encoder_phys_vid_needs_single_flush( |
| struct dpu_encoder_phys *phys_enc) |
| { |
| return phys_enc->split_role != ENC_ROLE_SOLO; |
| } |
| |
| static void dpu_encoder_phys_vid_atomic_mode_set( |
| struct dpu_encoder_phys *phys_enc, |
| struct drm_crtc_state *crtc_state, |
| struct drm_connector_state *conn_state) |
| { |
| phys_enc->irq[INTR_IDX_VSYNC] = phys_enc->hw_intf->cap->intr_vsync; |
| |
| phys_enc->irq[INTR_IDX_UNDERRUN] = phys_enc->hw_intf->cap->intr_underrun; |
| } |
| |
| static int dpu_encoder_phys_vid_control_vblank_irq( |
| struct dpu_encoder_phys *phys_enc, |
| bool enable) |
| { |
| int ret = 0; |
| int refcount; |
| |
| mutex_lock(&phys_enc->vblank_ctl_lock); |
| refcount = phys_enc->vblank_refcount; |
| |
| /* Slave encoders don't report vblank */ |
| if (!dpu_encoder_phys_vid_is_master(phys_enc)) |
| goto end; |
| |
| /* protect against negative */ |
| if (!enable && refcount == 0) { |
| ret = -EINVAL; |
| goto end; |
| } |
| |
| DRM_DEBUG_VBL("id:%u enable=%d/%d\n", DRMID(phys_enc->parent), enable, |
| refcount); |
| |
| if (enable) { |
| if (phys_enc->vblank_refcount == 0) |
| ret = dpu_core_irq_register_callback(phys_enc->dpu_kms, |
| phys_enc->irq[INTR_IDX_VSYNC], |
| dpu_encoder_phys_vid_vblank_irq, |
| phys_enc); |
| if (!ret) |
| phys_enc->vblank_refcount++; |
| } else if (!enable) { |
| if (phys_enc->vblank_refcount == 1) |
| ret = dpu_core_irq_unregister_callback(phys_enc->dpu_kms, |
| phys_enc->irq[INTR_IDX_VSYNC]); |
| if (!ret) |
| phys_enc->vblank_refcount--; |
| } |
| |
| end: |
| mutex_unlock(&phys_enc->vblank_ctl_lock); |
| if (ret) { |
| DRM_ERROR("failed: id:%u intf:%d ret:%d enable:%d refcnt:%d\n", |
| DRMID(phys_enc->parent), |
| phys_enc->hw_intf->idx - INTF_0, ret, enable, |
| refcount); |
| } |
| return ret; |
| } |
| |
| static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc) |
| { |
| struct dpu_hw_ctl *ctl; |
| const struct msm_format *fmt; |
| u32 fmt_fourcc; |
| u32 mode_3d; |
| |
| ctl = phys_enc->hw_ctl; |
| fmt_fourcc = dpu_encoder_get_drm_fmt(phys_enc); |
| fmt = mdp_get_format(&phys_enc->dpu_kms->base, fmt_fourcc, 0); |
| mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc); |
| |
| DPU_DEBUG_VIDENC(phys_enc, "\n"); |
| |
| if (WARN_ON(!phys_enc->hw_intf->ops.enable_timing)) |
| return; |
| |
| dpu_encoder_helper_split_config(phys_enc, phys_enc->hw_intf->idx); |
| |
| dpu_encoder_helper_phys_setup_cdm(phys_enc, fmt, CDM_CDWN_OUTPUT_HDMI); |
| |
| dpu_encoder_phys_vid_setup_timing_engine(phys_enc); |
| |
| /* |
| * For single flush cases (dual-ctl or pp-split), skip setting the |
| * flush bit for the slave intf, since both intfs use same ctl |
| * and HW will only flush the master. |
| */ |
| if (dpu_encoder_phys_vid_needs_single_flush(phys_enc) && |
| !dpu_encoder_phys_vid_is_master(phys_enc)) |
| goto skip_flush; |
| |
| ctl->ops.update_pending_flush_intf(ctl, phys_enc->hw_intf->idx); |
| if (mode_3d && ctl->ops.update_pending_flush_merge_3d && |
| phys_enc->hw_pp->merge_3d) |
| ctl->ops.update_pending_flush_merge_3d(ctl, phys_enc->hw_pp->merge_3d->idx); |
| |
| if (ctl->ops.update_pending_flush_cdm && phys_enc->hw_cdm) |
| ctl->ops.update_pending_flush_cdm(ctl, phys_enc->hw_cdm->idx); |
| |
| /* |
| * Peripheral flush must be updated whenever flushing SDP packets is needed. |
| * SDP packets are required for any YUV format (YUV420, YUV422, YUV444). |
| */ |
| if (ctl->ops.update_pending_flush_periph && dpu_encoder_needs_periph_flush(phys_enc)) |
| ctl->ops.update_pending_flush_periph(ctl, phys_enc->hw_intf->idx); |
| |
| skip_flush: |
| DPU_DEBUG_VIDENC(phys_enc, |
| "update pending flush ctl %d intf %d\n", |
| ctl->idx - CTL_0, phys_enc->hw_intf->idx); |
| |
| atomic_set(&phys_enc->underrun_cnt, 0); |
| |
| /* ctl_flush & timing engine enable will be triggered by framework */ |
| if (phys_enc->enable_state == DPU_ENC_DISABLED) |
| phys_enc->enable_state = DPU_ENC_ENABLING; |
| } |
| |
| static int dpu_encoder_phys_vid_wait_for_tx_complete( |
| struct dpu_encoder_phys *phys_enc) |
| { |
| struct dpu_encoder_wait_info wait_info; |
| int ret; |
| |
| wait_info.wq = &phys_enc->pending_kickoff_wq; |
| wait_info.atomic_cnt = &phys_enc->pending_kickoff_cnt; |
| wait_info.timeout_ms = KICKOFF_TIMEOUT_MS; |
| |
| if (!dpu_encoder_phys_vid_is_master(phys_enc)) { |
| return 0; |
| } |
| |
| /* Wait for kickoff to complete */ |
| ret = dpu_encoder_helper_wait_for_irq(phys_enc, |
| phys_enc->irq[INTR_IDX_VSYNC], |
| dpu_encoder_phys_vid_vblank_irq, |
| &wait_info); |
| |
| if (ret == -ETIMEDOUT) { |
| dpu_encoder_helper_report_irq_timeout(phys_enc, INTR_IDX_VSYNC); |
| } |
| |
| return ret; |
| } |
| |
| static int dpu_encoder_phys_vid_wait_for_commit_done( |
| struct dpu_encoder_phys *phys_enc) |
| { |
| struct dpu_hw_ctl *hw_ctl = phys_enc->hw_ctl; |
| int ret; |
| |
| if (!hw_ctl) |
| return 0; |
| |
| ret = wait_event_timeout(phys_enc->pending_kickoff_wq, |
| (hw_ctl->ops.get_flush_register(hw_ctl) == 0), |
| msecs_to_jiffies(50)); |
| if (ret <= 0) { |
| DPU_ERROR("vblank timeout: %x\n", hw_ctl->ops.get_flush_register(hw_ctl)); |
| return -ETIMEDOUT; |
| } |
| |
| return 0; |
| } |
| |
| static void dpu_encoder_phys_vid_prepare_for_kickoff( |
| struct dpu_encoder_phys *phys_enc) |
| { |
| struct dpu_hw_ctl *ctl; |
| int rc; |
| struct drm_encoder *drm_enc; |
| |
| drm_enc = phys_enc->parent; |
| |
| ctl = phys_enc->hw_ctl; |
| if (!ctl->ops.wait_reset_status) |
| return; |
| |
| /* |
| * hw supports hardware initiated ctl reset, so before we kickoff a new |
| * frame, need to check and wait for hw initiated ctl reset completion |
| */ |
| rc = ctl->ops.wait_reset_status(ctl); |
| if (rc) { |
| DPU_ERROR_VIDENC(phys_enc, "ctl %d reset failure: %d\n", |
| ctl->idx, rc); |
| msm_disp_snapshot_state(drm_enc->dev); |
| dpu_core_irq_unregister_callback(phys_enc->dpu_kms, |
| phys_enc->irq[INTR_IDX_VSYNC]); |
| } |
| } |
| |
| static void dpu_encoder_phys_vid_disable(struct dpu_encoder_phys *phys_enc) |
| { |
| unsigned long lock_flags; |
| int ret; |
| struct dpu_hw_intf_status intf_status = {0}; |
| |
| if (!phys_enc->parent || !phys_enc->parent->dev) { |
| DPU_ERROR("invalid encoder/device\n"); |
| return; |
| } |
| |
| if (!phys_enc->hw_intf) { |
| DPU_ERROR("invalid hw_intf %d hw_ctl %d\n", |
| phys_enc->hw_intf != NULL, phys_enc->hw_ctl != NULL); |
| return; |
| } |
| |
| if (WARN_ON(!phys_enc->hw_intf->ops.enable_timing)) |
| return; |
| |
| if (phys_enc->enable_state == DPU_ENC_DISABLED) { |
| DPU_ERROR("already disabled\n"); |
| return; |
| } |
| |
| spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags); |
| phys_enc->hw_intf->ops.enable_timing(phys_enc->hw_intf, 0); |
| if (dpu_encoder_phys_vid_is_master(phys_enc)) |
| dpu_encoder_phys_inc_pending(phys_enc); |
| spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags); |
| |
| /* |
| * Wait for a vsync so we know the ENABLE=0 latched before |
| * the (connector) source of the vsync's gets disabled, |
| * otherwise we end up in a funny state if we re-enable |
| * before the disable latches, which results that some of |
| * the settings changes for the new modeset (like new |
| * scanout buffer) don't latch properly.. |
| */ |
| if (dpu_encoder_phys_vid_is_master(phys_enc)) { |
| ret = dpu_encoder_phys_vid_wait_for_tx_complete(phys_enc); |
| if (ret) { |
| atomic_set(&phys_enc->pending_kickoff_cnt, 0); |
| DRM_ERROR("wait disable failed: id:%u intf:%d ret:%d\n", |
| DRMID(phys_enc->parent), |
| phys_enc->hw_intf->idx - INTF_0, ret); |
| } |
| } |
| |
| if (phys_enc->hw_intf && phys_enc->hw_intf->ops.get_status) |
| phys_enc->hw_intf->ops.get_status(phys_enc->hw_intf, &intf_status); |
| |
| /* |
| * Wait for a vsync if timing en status is on after timing engine |
| * is disabled. |
| */ |
| if (intf_status.is_en && dpu_encoder_phys_vid_is_master(phys_enc)) { |
| spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags); |
| dpu_encoder_phys_inc_pending(phys_enc); |
| spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags); |
| ret = dpu_encoder_phys_vid_wait_for_tx_complete(phys_enc); |
| if (ret) { |
| atomic_set(&phys_enc->pending_kickoff_cnt, 0); |
| DRM_ERROR("wait disable failed: id:%u intf:%d ret:%d\n", |
| DRMID(phys_enc->parent), |
| phys_enc->hw_intf->idx - INTF_0, ret); |
| } |
| } |
| |
| dpu_encoder_helper_phys_cleanup(phys_enc); |
| phys_enc->enable_state = DPU_ENC_DISABLED; |
| } |
| |
| static void dpu_encoder_phys_vid_handle_post_kickoff( |
| struct dpu_encoder_phys *phys_enc) |
| { |
| unsigned long lock_flags; |
| |
| /* |
| * Video mode must flush CTL before enabling timing engine |
| * Video encoders need to turn on their interfaces now |
| */ |
| if (phys_enc->enable_state == DPU_ENC_ENABLING) { |
| trace_dpu_enc_phys_vid_post_kickoff(DRMID(phys_enc->parent), |
| phys_enc->hw_intf->idx - INTF_0); |
| spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags); |
| phys_enc->hw_intf->ops.enable_timing(phys_enc->hw_intf, 1); |
| spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags); |
| phys_enc->enable_state = DPU_ENC_ENABLED; |
| } |
| } |
| |
| static void dpu_encoder_phys_vid_irq_enable(struct dpu_encoder_phys *phys_enc) |
| { |
| int ret; |
| |
| trace_dpu_enc_phys_vid_irq_enable(DRMID(phys_enc->parent), |
| phys_enc->hw_intf->idx - INTF_0, |
| phys_enc->vblank_refcount); |
| |
| ret = dpu_encoder_phys_vid_control_vblank_irq(phys_enc, true); |
| if (WARN_ON(ret)) |
| return; |
| |
| dpu_core_irq_register_callback(phys_enc->dpu_kms, |
| phys_enc->irq[INTR_IDX_UNDERRUN], |
| dpu_encoder_phys_vid_underrun_irq, |
| phys_enc); |
| } |
| |
| static void dpu_encoder_phys_vid_irq_disable(struct dpu_encoder_phys *phys_enc) |
| { |
| trace_dpu_enc_phys_vid_irq_disable(DRMID(phys_enc->parent), |
| phys_enc->hw_intf->idx - INTF_0, |
| phys_enc->vblank_refcount); |
| |
| dpu_encoder_phys_vid_control_vblank_irq(phys_enc, false); |
| dpu_core_irq_unregister_callback(phys_enc->dpu_kms, |
| phys_enc->irq[INTR_IDX_UNDERRUN]); |
| } |
| |
| static int dpu_encoder_phys_vid_get_line_count( |
| struct dpu_encoder_phys *phys_enc) |
| { |
| if (!dpu_encoder_phys_vid_is_master(phys_enc)) |
| return -EINVAL; |
| |
| if (!phys_enc->hw_intf || !phys_enc->hw_intf->ops.get_line_count) |
| return -EINVAL; |
| |
| return phys_enc->hw_intf->ops.get_line_count(phys_enc->hw_intf); |
| } |
| |
| static int dpu_encoder_phys_vid_get_frame_count( |
| struct dpu_encoder_phys *phys_enc) |
| { |
| struct dpu_hw_intf_status s = {0}; |
| u32 fetch_start = 0; |
| struct drm_display_mode mode; |
| |
| drm_mode_init(&mode, &phys_enc->cached_mode); |
| |
| if (!dpu_encoder_phys_vid_is_master(phys_enc)) |
| return -EINVAL; |
| |
| if (!phys_enc->hw_intf || !phys_enc->hw_intf->ops.get_status) |
| return -EINVAL; |
| |
| phys_enc->hw_intf->ops.get_status(phys_enc->hw_intf, &s); |
| |
| if (s.is_prog_fetch_en && s.is_en) { |
| fetch_start = mode.vtotal - (mode.vsync_start - mode.vdisplay); |
| if ((s.line_count > fetch_start) && |
| (s.line_count <= mode.vtotal)) |
| return s.frame_count + 1; |
| } |
| |
| return s.frame_count; |
| } |
| |
| static void dpu_encoder_phys_vid_init_ops(struct dpu_encoder_phys_ops *ops) |
| { |
| ops->is_master = dpu_encoder_phys_vid_is_master; |
| ops->atomic_mode_set = dpu_encoder_phys_vid_atomic_mode_set; |
| ops->enable = dpu_encoder_phys_vid_enable; |
| ops->disable = dpu_encoder_phys_vid_disable; |
| ops->control_vblank_irq = dpu_encoder_phys_vid_control_vblank_irq; |
| ops->wait_for_commit_done = dpu_encoder_phys_vid_wait_for_commit_done; |
| ops->wait_for_tx_complete = dpu_encoder_phys_vid_wait_for_tx_complete; |
| ops->irq_enable = dpu_encoder_phys_vid_irq_enable; |
| ops->irq_disable = dpu_encoder_phys_vid_irq_disable; |
| ops->prepare_for_kickoff = dpu_encoder_phys_vid_prepare_for_kickoff; |
| ops->handle_post_kickoff = dpu_encoder_phys_vid_handle_post_kickoff; |
| ops->needs_single_flush = dpu_encoder_phys_vid_needs_single_flush; |
| ops->get_line_count = dpu_encoder_phys_vid_get_line_count; |
| ops->get_frame_count = dpu_encoder_phys_vid_get_frame_count; |
| } |
| |
| struct dpu_encoder_phys *dpu_encoder_phys_vid_init(struct drm_device *dev, |
| struct dpu_enc_phys_init_params *p) |
| { |
| struct dpu_encoder_phys *phys_enc = NULL; |
| |
| if (!p) { |
| DPU_ERROR("failed to create encoder due to invalid parameter\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| phys_enc = drmm_kzalloc(dev, sizeof(*phys_enc), GFP_KERNEL); |
| if (!phys_enc) { |
| DPU_ERROR("failed to create encoder due to memory allocation error\n"); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| DPU_DEBUG_VIDENC(phys_enc, "\n"); |
| |
| dpu_encoder_phys_init(phys_enc, p); |
| mutex_init(&phys_enc->vblank_ctl_lock); |
| phys_enc->vblank_refcount = 0; |
| |
| dpu_encoder_phys_vid_init_ops(&phys_enc->ops); |
| phys_enc->intf_mode = INTF_MODE_VIDEO; |
| |
| DPU_DEBUG_VIDENC(phys_enc, "created intf idx:%d\n", p->hw_intf->idx); |
| |
| return phys_enc; |
| } |