| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2020 BayLibre, SAS |
| * Author: Neil Armstrong <narmstrong@baylibre.com> |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <video/mipi_display.h> |
| |
| #include <drm/drm_crtc.h> |
| #include <drm/drm_device.h> |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_modes.h> |
| #include <drm/drm_panel.h> |
| |
| struct tdo_tl070wsh30_panel { |
| struct drm_panel base; |
| struct mipi_dsi_device *link; |
| |
| struct regulator *supply; |
| struct gpio_desc *reset_gpio; |
| }; |
| |
| static inline |
| struct tdo_tl070wsh30_panel *to_tdo_tl070wsh30_panel(struct drm_panel *panel) |
| { |
| return container_of(panel, struct tdo_tl070wsh30_panel, base); |
| } |
| |
| static int tdo_tl070wsh30_panel_prepare(struct drm_panel *panel) |
| { |
| struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = to_tdo_tl070wsh30_panel(panel); |
| int err; |
| |
| err = regulator_enable(tdo_tl070wsh30->supply); |
| if (err < 0) |
| return err; |
| |
| usleep_range(10000, 11000); |
| |
| gpiod_set_value_cansleep(tdo_tl070wsh30->reset_gpio, 1); |
| |
| usleep_range(10000, 11000); |
| |
| gpiod_set_value_cansleep(tdo_tl070wsh30->reset_gpio, 0); |
| |
| msleep(200); |
| |
| err = mipi_dsi_dcs_exit_sleep_mode(tdo_tl070wsh30->link); |
| if (err < 0) { |
| dev_err(panel->dev, "failed to exit sleep mode: %d\n", err); |
| regulator_disable(tdo_tl070wsh30->supply); |
| return err; |
| } |
| |
| msleep(200); |
| |
| err = mipi_dsi_dcs_set_display_on(tdo_tl070wsh30->link); |
| if (err < 0) { |
| dev_err(panel->dev, "failed to set display on: %d\n", err); |
| regulator_disable(tdo_tl070wsh30->supply); |
| return err; |
| } |
| |
| msleep(20); |
| |
| return 0; |
| } |
| |
| static int tdo_tl070wsh30_panel_unprepare(struct drm_panel *panel) |
| { |
| struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = to_tdo_tl070wsh30_panel(panel); |
| int err; |
| |
| err = mipi_dsi_dcs_set_display_off(tdo_tl070wsh30->link); |
| if (err < 0) |
| dev_err(panel->dev, "failed to set display off: %d\n", err); |
| |
| usleep_range(10000, 11000); |
| |
| err = mipi_dsi_dcs_enter_sleep_mode(tdo_tl070wsh30->link); |
| if (err < 0) { |
| dev_err(panel->dev, "failed to enter sleep mode: %d\n", err); |
| return err; |
| } |
| |
| usleep_range(10000, 11000); |
| |
| regulator_disable(tdo_tl070wsh30->supply); |
| |
| return 0; |
| } |
| |
| static const struct drm_display_mode default_mode = { |
| .clock = 47250, |
| .hdisplay = 1024, |
| .hsync_start = 1024 + 46, |
| .hsync_end = 1024 + 46 + 80, |
| .htotal = 1024 + 46 + 80 + 100, |
| .vdisplay = 600, |
| .vsync_start = 600 + 5, |
| .vsync_end = 600 + 5 + 5, |
| .vtotal = 600 + 5 + 5 + 20, |
| .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC, |
| }; |
| |
| static int tdo_tl070wsh30_panel_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| struct drm_display_mode *mode; |
| |
| mode = drm_mode_duplicate(connector->dev, &default_mode); |
| if (!mode) { |
| dev_err(panel->dev, "failed to add mode %ux%u@%u\n", |
| default_mode.hdisplay, default_mode.vdisplay, |
| drm_mode_vrefresh(&default_mode)); |
| return -ENOMEM; |
| } |
| |
| drm_mode_set_name(mode); |
| |
| drm_mode_probed_add(connector, mode); |
| |
| connector->display_info.width_mm = 154; |
| connector->display_info.height_mm = 85; |
| connector->display_info.bpc = 8; |
| |
| return 1; |
| } |
| |
| static const struct drm_panel_funcs tdo_tl070wsh30_panel_funcs = { |
| .unprepare = tdo_tl070wsh30_panel_unprepare, |
| .prepare = tdo_tl070wsh30_panel_prepare, |
| .get_modes = tdo_tl070wsh30_panel_get_modes, |
| }; |
| |
| static const struct of_device_id tdo_tl070wsh30_of_match[] = { |
| { .compatible = "tdo,tl070wsh30", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, tdo_tl070wsh30_of_match); |
| |
| static int tdo_tl070wsh30_panel_add(struct tdo_tl070wsh30_panel *tdo_tl070wsh30) |
| { |
| struct device *dev = &tdo_tl070wsh30->link->dev; |
| int err; |
| |
| tdo_tl070wsh30->supply = devm_regulator_get(dev, "power"); |
| if (IS_ERR(tdo_tl070wsh30->supply)) |
| return PTR_ERR(tdo_tl070wsh30->supply); |
| |
| tdo_tl070wsh30->reset_gpio = devm_gpiod_get(dev, "reset", |
| GPIOD_OUT_LOW); |
| if (IS_ERR(tdo_tl070wsh30->reset_gpio)) { |
| err = PTR_ERR(tdo_tl070wsh30->reset_gpio); |
| dev_dbg(dev, "failed to get reset gpio: %d\n", err); |
| return err; |
| } |
| |
| drm_panel_init(&tdo_tl070wsh30->base, &tdo_tl070wsh30->link->dev, |
| &tdo_tl070wsh30_panel_funcs, DRM_MODE_CONNECTOR_DSI); |
| |
| err = drm_panel_of_backlight(&tdo_tl070wsh30->base); |
| if (err) |
| return err; |
| |
| drm_panel_add(&tdo_tl070wsh30->base); |
| |
| return 0; |
| } |
| |
| static int tdo_tl070wsh30_panel_probe(struct mipi_dsi_device *dsi) |
| { |
| struct tdo_tl070wsh30_panel *tdo_tl070wsh30; |
| int err; |
| |
| dsi->lanes = 4; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_LPM; |
| |
| tdo_tl070wsh30 = devm_kzalloc(&dsi->dev, sizeof(*tdo_tl070wsh30), |
| GFP_KERNEL); |
| if (!tdo_tl070wsh30) |
| return -ENOMEM; |
| |
| mipi_dsi_set_drvdata(dsi, tdo_tl070wsh30); |
| tdo_tl070wsh30->link = dsi; |
| |
| err = tdo_tl070wsh30_panel_add(tdo_tl070wsh30); |
| if (err < 0) |
| return err; |
| |
| return mipi_dsi_attach(dsi); |
| } |
| |
| static void tdo_tl070wsh30_panel_remove(struct mipi_dsi_device *dsi) |
| { |
| struct tdo_tl070wsh30_panel *tdo_tl070wsh30 = mipi_dsi_get_drvdata(dsi); |
| int err; |
| |
| err = mipi_dsi_detach(dsi); |
| if (err < 0) |
| dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err); |
| |
| drm_panel_remove(&tdo_tl070wsh30->base); |
| } |
| |
| static struct mipi_dsi_driver tdo_tl070wsh30_panel_driver = { |
| .driver = { |
| .name = "panel-tdo-tl070wsh30", |
| .of_match_table = tdo_tl070wsh30_of_match, |
| }, |
| .probe = tdo_tl070wsh30_panel_probe, |
| .remove = tdo_tl070wsh30_panel_remove, |
| }; |
| module_mipi_dsi_driver(tdo_tl070wsh30_panel_driver); |
| |
| MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>"); |
| MODULE_DESCRIPTION("TDO TL070WSH30 panel driver"); |
| MODULE_LICENSE("GPL v2"); |