| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2021 Raspberry Pi |
| */ |
| |
| #include "v3d_drv.h" |
| #include "v3d_regs.h" |
| |
| #define V3D_PERFMONID_MIN 1 |
| #define V3D_PERFMONID_MAX U32_MAX |
| |
| static const struct v3d_perf_counter_desc v3d_v42_performance_counters[] = { |
| {"FEP", "FEP-valid-primitives-no-rendered-pixels", "[FEP] Valid primitives that result in no rendered pixels, for all rendered tiles"}, |
| {"FEP", "FEP-valid-primitives-rendered-pixels", "[FEP] Valid primitives for all rendered tiles (primitives may be counted in more than one tile)"}, |
| {"FEP", "FEP-clipped-quads", "[FEP] Early-Z/Near/Far clipped quads"}, |
| {"FEP", "FEP-valid-quads", "[FEP] Valid quads"}, |
| {"TLB", "TLB-quads-not-passing-stencil-test", "[TLB] Quads with no pixels passing the stencil test"}, |
| {"TLB", "TLB-quads-not-passing-z-and-stencil-test", "[TLB] Quads with no pixels passing the Z and stencil tests"}, |
| {"TLB", "TLB-quads-passing-z-and-stencil-test", "[TLB] Quads with any pixels passing the Z and stencil tests"}, |
| {"TLB", "TLB-quads-with-zero-coverage", "[TLB] Quads with all pixels having zero coverage"}, |
| {"TLB", "TLB-quads-with-non-zero-coverage", "[TLB] Quads with any pixels having non-zero coverage"}, |
| {"TLB", "TLB-quads-written-to-color-buffer", "[TLB] Quads with valid pixels written to colour buffer"}, |
| {"PTB", "PTB-primitives-discarded-outside-viewport", "[PTB] Primitives discarded by being outside the viewport"}, |
| {"PTB", "PTB-primitives-need-clipping", "[PTB] Primitives that need clipping"}, |
| {"PTB", "PTB-primitives-discarded-reversed", "[PTB] Primitives that are discarded because they are reversed"}, |
| {"QPU", "QPU-total-idle-clk-cycles", "[QPU] Total idle clock cycles for all QPUs"}, |
| {"QPU", "QPU-total-active-clk-cycles-vertex-coord-shading", "[QPU] Total active clock cycles for all QPUs doing vertex/coordinate/user shading (counts only when QPU is not stalled)"}, |
| {"QPU", "QPU-total-active-clk-cycles-fragment-shading", "[QPU] Total active clock cycles for all QPUs doing fragment shading (counts only when QPU is not stalled)"}, |
| {"QPU", "QPU-total-clk-cycles-executing-valid-instr", "[QPU] Total clock cycles for all QPUs executing valid instructions"}, |
| {"QPU", "QPU-total-clk-cycles-waiting-TMU", "[QPU] Total clock cycles for all QPUs stalled waiting for TMUs only (counter won't increment if QPU also stalling for another reason)"}, |
| {"QPU", "QPU-total-clk-cycles-waiting-scoreboard", "[QPU] Total clock cycles for all QPUs stalled waiting for Scoreboard only (counter won't increment if QPU also stalling for another reason)"}, |
| {"QPU", "QPU-total-clk-cycles-waiting-varyings", "[QPU] Total clock cycles for all QPUs stalled waiting for Varyings only (counter won't increment if QPU also stalling for another reason)"}, |
| {"QPU", "QPU-total-instr-cache-hit", "[QPU] Total instruction cache hits for all slices"}, |
| {"QPU", "QPU-total-instr-cache-miss", "[QPU] Total instruction cache misses for all slices"}, |
| {"QPU", "QPU-total-uniform-cache-hit", "[QPU] Total uniforms cache hits for all slices"}, |
| {"QPU", "QPU-total-uniform-cache-miss", "[QPU] Total uniforms cache misses for all slices"}, |
| {"TMU", "TMU-total-text-quads-access", "[TMU] Total texture cache accesses"}, |
| {"TMU", "TMU-total-text-cache-miss", "[TMU] Total texture cache misses (number of fetches from memory/L2cache)"}, |
| {"VPM", "VPM-total-clk-cycles-VDW-stalled", "[VPM] Total clock cycles VDW is stalled waiting for VPM access"}, |
| {"VPM", "VPM-total-clk-cycles-VCD-stalled", "[VPM] Total clock cycles VCD is stalled waiting for VPM access"}, |
| {"CLE", "CLE-bin-thread-active-cycles", "[CLE] Bin thread active cycles"}, |
| {"CLE", "CLE-render-thread-active-cycles", "[CLE] Render thread active cycles"}, |
| {"L2T", "L2T-total-cache-hit", "[L2T] Total Level 2 cache hits"}, |
| {"L2T", "L2T-total-cache-miss", "[L2T] Total Level 2 cache misses"}, |
| {"CORE", "cycle-count", "[CORE] Cycle counter"}, |
| {"QPU", "QPU-total-clk-cycles-waiting-vertex-coord-shading", "[QPU] Total stalled clock cycles for all QPUs doing vertex/coordinate/user shading"}, |
| {"QPU", "QPU-total-clk-cycles-waiting-fragment-shading", "[QPU] Total stalled clock cycles for all QPUs doing fragment shading"}, |
| {"PTB", "PTB-primitives-binned", "[PTB] Total primitives binned"}, |
| {"AXI", "AXI-writes-seen-watch-0", "[AXI] Writes seen by watch 0"}, |
| {"AXI", "AXI-reads-seen-watch-0", "[AXI] Reads seen by watch 0"}, |
| {"AXI", "AXI-writes-stalled-seen-watch-0", "[AXI] Write stalls seen by watch 0"}, |
| {"AXI", "AXI-reads-stalled-seen-watch-0", "[AXI] Read stalls seen by watch 0"}, |
| {"AXI", "AXI-write-bytes-seen-watch-0", "[AXI] Total bytes written seen by watch 0"}, |
| {"AXI", "AXI-read-bytes-seen-watch-0", "[AXI] Total bytes read seen by watch 0"}, |
| {"AXI", "AXI-writes-seen-watch-1", "[AXI] Writes seen by watch 1"}, |
| {"AXI", "AXI-reads-seen-watch-1", "[AXI] Reads seen by watch 1"}, |
| {"AXI", "AXI-writes-stalled-seen-watch-1", "[AXI] Write stalls seen by watch 1"}, |
| {"AXI", "AXI-reads-stalled-seen-watch-1", "[AXI] Read stalls seen by watch 1"}, |
| {"AXI", "AXI-write-bytes-seen-watch-1", "[AXI] Total bytes written seen by watch 1"}, |
| {"AXI", "AXI-read-bytes-seen-watch-1", "[AXI] Total bytes read seen by watch 1"}, |
| {"TLB", "TLB-partial-quads-written-to-color-buffer", "[TLB] Partial quads written to the colour buffer"}, |
| {"TMU", "TMU-total-config-access", "[TMU] Total config accesses"}, |
| {"L2T", "L2T-no-id-stalled", "[L2T] No ID stall"}, |
| {"L2T", "L2T-command-queue-stalled", "[L2T] Command queue full stall"}, |
| {"L2T", "L2T-TMU-writes", "[L2T] TMU write accesses"}, |
| {"TMU", "TMU-active-cycles", "[TMU] Active cycles"}, |
| {"TMU", "TMU-stalled-cycles", "[TMU] Stalled cycles"}, |
| {"CLE", "CLE-thread-active-cycles", "[CLE] Bin or render thread active cycles"}, |
| {"L2T", "L2T-TMU-reads", "[L2T] TMU read accesses"}, |
| {"L2T", "L2T-CLE-reads", "[L2T] CLE read accesses"}, |
| {"L2T", "L2T-VCD-reads", "[L2T] VCD read accesses"}, |
| {"L2T", "L2T-TMU-config-reads", "[L2T] TMU CFG read accesses"}, |
| {"L2T", "L2T-SLC0-reads", "[L2T] SLC0 read accesses"}, |
| {"L2T", "L2T-SLC1-reads", "[L2T] SLC1 read accesses"}, |
| {"L2T", "L2T-SLC2-reads", "[L2T] SLC2 read accesses"}, |
| {"L2T", "L2T-TMU-write-miss", "[L2T] TMU write misses"}, |
| {"L2T", "L2T-TMU-read-miss", "[L2T] TMU read misses"}, |
| {"L2T", "L2T-CLE-read-miss", "[L2T] CLE read misses"}, |
| {"L2T", "L2T-VCD-read-miss", "[L2T] VCD read misses"}, |
| {"L2T", "L2T-TMU-config-read-miss", "[L2T] TMU CFG read misses"}, |
| {"L2T", "L2T-SLC0-read-miss", "[L2T] SLC0 read misses"}, |
| {"L2T", "L2T-SLC1-read-miss", "[L2T] SLC1 read misses"}, |
| {"L2T", "L2T-SLC2-read-miss", "[L2T] SLC2 read misses"}, |
| {"CORE", "core-memory-writes", "[CORE] Total memory writes"}, |
| {"L2T", "L2T-memory-writes", "[L2T] Total memory writes"}, |
| {"PTB", "PTB-memory-writes", "[PTB] Total memory writes"}, |
| {"TLB", "TLB-memory-writes", "[TLB] Total memory writes"}, |
| {"CORE", "core-memory-reads", "[CORE] Total memory reads"}, |
| {"L2T", "L2T-memory-reads", "[L2T] Total memory reads"}, |
| {"PTB", "PTB-memory-reads", "[PTB] Total memory reads"}, |
| {"PSE", "PSE-memory-reads", "[PSE] Total memory reads"}, |
| {"TLB", "TLB-memory-reads", "[TLB] Total memory reads"}, |
| {"GMP", "GMP-memory-reads", "[GMP] Total memory reads"}, |
| {"PTB", "PTB-memory-words-writes", "[PTB] Total memory words written"}, |
| {"TLB", "TLB-memory-words-writes", "[TLB] Total memory words written"}, |
| {"PSE", "PSE-memory-words-reads", "[PSE] Total memory words read"}, |
| {"TLB", "TLB-memory-words-reads", "[TLB] Total memory words read"}, |
| {"TMU", "TMU-MRU-hits", "[TMU] Total MRU hits"}, |
| {"CORE", "compute-active-cycles", "[CORE] Compute active cycles"}, |
| }; |
| |
| static const struct v3d_perf_counter_desc v3d_v71_performance_counters[] = { |
| {"CORE", "cycle-count", "[CORE] Cycle counter"}, |
| {"CORE", "core-active", "[CORE] Bin/Render/Compute active cycles"}, |
| {"CLE", "CLE-bin-thread-active-cycles", "[CLE] Bin thread active cycles"}, |
| {"CLE", "CLE-render-thread-active-cycles", "[CLE] Render thread active cycles"}, |
| {"CORE", "compute-active-cycles", "[CORE] Compute active cycles"}, |
| {"FEP", "FEP-valid-primitives-no-rendered-pixels", "[FEP] Valid primitives that result in no rendered pixels, for all rendered tiles"}, |
| {"FEP", "FEP-valid-primitives-rendered-pixels", "[FEP] Valid primitives for all rendered tiles (primitives may be counted in more than one tile)"}, |
| {"FEP", "FEP-clipped-quads", "[FEP] Early-Z/Near/Far clipped quads"}, |
| {"FEP", "FEP-valid-quads", "[FEP] Valid quads"}, |
| {"TLB", "TLB-quads-not-passing-stencil-test", "[TLB] Quads with no pixels passing the stencil test"}, |
| {"TLB", "TLB-quads-not-passing-z-and-stencil-test", "[TLB] Quads with no pixels passing the Z and stencil tests"}, |
| {"TLB", "TLB-quads-passing-z-and-stencil-test", "[TLB] Quads with any pixels passing the Z and stencil tests"}, |
| {"TLB", "TLB-quads-written-to-color-buffer", "[TLB] Quads with valid pixels written to colour buffer"}, |
| {"TLB", "TLB-partial-quads-written-to-color-buffer", "[TLB] Partial quads written to the colour buffer"}, |
| {"PTB", "PTB-primitives-need-clipping", "[PTB] Primitives that need clipping"}, |
| {"PTB", "PTB-primitives-discarded-outside-viewport", "[PTB] Primitives discarded by being outside the viewport"}, |
| {"PTB", "PTB-primitives-binned", "[PTB] Total primitives binned"}, |
| {"PTB", "PTB-primitives-discarded-reversed", "[PTB] Primitives that are discarded because they are reversed"}, |
| {"QPU", "QPU-total-instr-cache-hit", "[QPU] Total instruction cache hits for all slices"}, |
| {"QPU", "QPU-total-instr-cache-miss", "[QPU] Total instruction cache misses for all slices"}, |
| {"QPU", "QPU-total-uniform-cache-hit", "[QPU] Total uniforms cache hits for all slices"}, |
| {"QPU", "QPU-total-uniform-cache-miss", "[QPU] Total uniforms cache misses for all slices"}, |
| {"TMU", "TMU-active-cycles", "[TMU] Active cycles"}, |
| {"TMU", "TMU-stalled-cycles", "[TMU] Stalled cycles"}, |
| {"TMU", "TMU-total-text-quads-access", "[TMU] Total texture cache accesses"}, |
| {"TMU", "TMU-cache-x4-active-cycles", "[TMU] Cache active cycles for x4 access"}, |
| {"TMU", "TMU-cache-x4-stalled-cycles", "[TMU] Cache stalled cycles for x4 access"}, |
| {"TMU", "TMU-total-text-quads-x4-access", "[TMU] Total texture cache x4 access"}, |
| {"L2T", "L2T-total-cache-hit", "[L2T] Total Level 2 cache hits"}, |
| {"L2T", "L2T-total-cache-miss", "[L2T] Total Level 2 cache misses"}, |
| {"L2T", "L2T-local", "[L2T] Local mode access"}, |
| {"L2T", "L2T-writeback", "[L2T] Writeback"}, |
| {"L2T", "L2T-zero", "[L2T] Zero"}, |
| {"L2T", "L2T-merge", "[L2T] Merge"}, |
| {"L2T", "L2T-fill", "[L2T] Fill"}, |
| {"L2T", "L2T-stalls-no-wid", "[L2T] Stalls because no WID available"}, |
| {"L2T", "L2T-stalls-no-rid", "[L2T] Stalls because no RID available"}, |
| {"L2T", "L2T-stalls-queue-full", "[L2T] Stalls because internal queue full"}, |
| {"L2T", "L2T-stalls-wrightback", "[L2T] Stalls because writeback in flight"}, |
| {"L2T", "L2T-stalls-mem", "[L2T] Stalls because AXI blocks read"}, |
| {"L2T", "L2T-stalls-fill", "[L2T] Stalls because fill pending for victim cache-line"}, |
| {"L2T", "L2T-hitq", "[L2T] Sent request via hit queue"}, |
| {"L2T", "L2T-hitq-full", "[L2T] Sent request via main queue because hit queue is full"}, |
| {"L2T", "L2T-stalls-read-data", "[L2T] Stalls because waiting for data from SDRAM"}, |
| {"L2T", "L2T-TMU-read-hits", "[L2T] TMU read hits"}, |
| {"L2T", "L2T-TMU-read-miss", "[L2T] TMU read misses"}, |
| {"L2T", "L2T-VCD-read-hits", "[L2T] VCD read hits"}, |
| {"L2T", "L2T-VCD-read-miss", "[L2T] VCD read misses"}, |
| {"L2T", "L2T-SLC-read-hits", "[L2T] SLC read hits (all slices)"}, |
| {"L2T", "L2T-SLC-read-miss", "[L2T] SLC read misses (all slices)"}, |
| {"AXI", "AXI-writes-seen-watch-0", "[AXI] Writes seen by watch 0"}, |
| {"AXI", "AXI-reads-seen-watch-0", "[AXI] Reads seen by watch 0"}, |
| {"AXI", "AXI-writes-stalled-seen-watch-0", "[AXI] Write stalls seen by watch 0"}, |
| {"AXI", "AXI-reads-stalled-seen-watch-0", "[AXI] Read stalls seen by watch 0"}, |
| {"AXI", "AXI-write-bytes-seen-watch-0", "[AXI] Total bytes written seen by watch 0"}, |
| {"AXI", "AXI-read-bytes-seen-watch-0", "[AXI] Total bytes read seen by watch 0"}, |
| {"AXI", "AXI-writes-seen-watch-1", "[AXI] Writes seen by watch 1"}, |
| {"AXI", "AXI-reads-seen-watch-1", "[AXI] Reads seen by watch 1"}, |
| {"AXI", "AXI-writes-stalled-seen-watch-1", "[AXI] Write stalls seen by watch 1"}, |
| {"AXI", "AXI-reads-stalled-seen-watch-1", "[AXI] Read stalls seen by watch 1"}, |
| {"AXI", "AXI-write-bytes-seen-watch-1", "[AXI] Total bytes written seen by watch 1"}, |
| {"AXI", "AXI-read-bytes-seen-watch-1", "[AXI] Total bytes read seen by watch 1"}, |
| {"CORE", "core-memory-writes", "[CORE] Total memory writes"}, |
| {"L2T", "L2T-memory-writes", "[L2T] Total memory writes"}, |
| {"PTB", "PTB-memory-writes", "[PTB] Total memory writes"}, |
| {"TLB", "TLB-memory-writes", "[TLB] Total memory writes"}, |
| {"CORE", "core-memory-reads", "[CORE] Total memory reads"}, |
| {"L2T", "L2T-memory-reads", "[L2T] Total memory reads"}, |
| {"PTB", "PTB-memory-reads", "[PTB] Total memory reads"}, |
| {"PSE", "PSE-memory-reads", "[PSE] Total memory reads"}, |
| {"TLB", "TLB-memory-reads", "[TLB] Total memory reads"}, |
| {"PTB", "PTB-memory-words-writes", "[PTB] Total memory words written"}, |
| {"TLB", "TLB-memory-words-writes", "[TLB] Total memory words written"}, |
| {"PSE", "PSE-memory-words-reads", "[PSE] Total memory words read"}, |
| {"TLB", "TLB-memory-words-reads", "[TLB] Total memory words read"}, |
| {"AXI", "AXI-read-trans", "[AXI] Read transaction count"}, |
| {"AXI", "AXI-write-trans", "[AXI] Write transaction count"}, |
| {"AXI", "AXI-read-wait-cycles", "[AXI] Read total wait cycles"}, |
| {"AXI", "AXI-write-wait-cycles", "[AXI] Write total wait cycles"}, |
| {"AXI", "AXI-max-outstanding-reads", "[AXI] Maximum outstanding read transactions"}, |
| {"AXI", "AXI-max-outstanding-writes", "[AXI] Maximum outstanding write transactions"}, |
| {"QPU", "QPU-wait-bubble", "[QPU] Pipeline bubble in qcycles due all threads waiting"}, |
| {"QPU", "QPU-ic-miss-bubble", "[QPU] Pipeline bubble in qcycles due instruction-cache miss"}, |
| {"QPU", "QPU-active", "[QPU] Executed shader instruction"}, |
| {"QPU", "QPU-total-active-clk-cycles-fragment-shading", "[QPU] Total active clock cycles for all QPUs doing fragment shading (counts only when QPU is not stalled)"}, |
| {"QPU", "QPU-stalls", "[QPU] Stalled qcycles executing shader instruction"}, |
| {"QPU", "QPU-total-clk-cycles-waiting-fragment-shading", "[QPU] Total stalled clock cycles for all QPUs doing fragment shading"}, |
| {"QPU", "QPU-stalls-TMU", "[QPU] Stalled qcycles waiting for TMU"}, |
| {"QPU", "QPU-stalls-TLB", "[QPU] Stalled qcycles waiting for TLB"}, |
| {"QPU", "QPU-stalls-VPM", "[QPU] Stalled qcycles waiting for VPM"}, |
| {"QPU", "QPU-stalls-uniforms", "[QPU] Stalled qcycles waiting for uniforms"}, |
| {"QPU", "QPU-stalls-SFU", "[QPU] Stalled qcycles waiting for SFU"}, |
| {"QPU", "QPU-stalls-other", "[QPU] Stalled qcycles waiting for any other reason (vary/W/Z)"}, |
| }; |
| |
| void v3d_perfmon_init(struct v3d_dev *v3d) |
| { |
| const struct v3d_perf_counter_desc *counters = NULL; |
| unsigned int max = 0; |
| |
| if (v3d->ver >= 71) { |
| counters = v3d_v71_performance_counters; |
| max = ARRAY_SIZE(v3d_v71_performance_counters); |
| } else if (v3d->ver >= 42) { |
| counters = v3d_v42_performance_counters; |
| max = ARRAY_SIZE(v3d_v42_performance_counters); |
| } |
| |
| v3d->perfmon_info.max_counters = max; |
| v3d->perfmon_info.counters = counters; |
| } |
| |
| void v3d_perfmon_get(struct v3d_perfmon *perfmon) |
| { |
| if (perfmon) |
| refcount_inc(&perfmon->refcnt); |
| } |
| |
| void v3d_perfmon_put(struct v3d_perfmon *perfmon) |
| { |
| if (perfmon && refcount_dec_and_test(&perfmon->refcnt)) { |
| mutex_destroy(&perfmon->lock); |
| kfree(perfmon); |
| } |
| } |
| |
| void v3d_perfmon_start(struct v3d_dev *v3d, struct v3d_perfmon *perfmon) |
| { |
| unsigned int i; |
| u32 mask; |
| u8 ncounters; |
| |
| if (WARN_ON_ONCE(!perfmon || v3d->active_perfmon)) |
| return; |
| |
| ncounters = perfmon->ncounters; |
| mask = GENMASK(ncounters - 1, 0); |
| |
| for (i = 0; i < ncounters; i++) { |
| u32 source = i / 4; |
| u32 channel = V3D_SET_FIELD(perfmon->counters[i], V3D_PCTR_S0); |
| |
| i++; |
| channel |= V3D_SET_FIELD(i < ncounters ? perfmon->counters[i] : 0, |
| V3D_PCTR_S1); |
| i++; |
| channel |= V3D_SET_FIELD(i < ncounters ? perfmon->counters[i] : 0, |
| V3D_PCTR_S2); |
| i++; |
| channel |= V3D_SET_FIELD(i < ncounters ? perfmon->counters[i] : 0, |
| V3D_PCTR_S3); |
| V3D_CORE_WRITE(0, V3D_V4_PCTR_0_SRC_X(source), channel); |
| } |
| |
| V3D_CORE_WRITE(0, V3D_V4_PCTR_0_CLR, mask); |
| V3D_CORE_WRITE(0, V3D_PCTR_0_OVERFLOW, mask); |
| V3D_CORE_WRITE(0, V3D_V4_PCTR_0_EN, mask); |
| |
| v3d->active_perfmon = perfmon; |
| } |
| |
| void v3d_perfmon_stop(struct v3d_dev *v3d, struct v3d_perfmon *perfmon, |
| bool capture) |
| { |
| unsigned int i; |
| |
| if (!perfmon || !v3d->active_perfmon) |
| return; |
| |
| mutex_lock(&perfmon->lock); |
| if (perfmon != v3d->active_perfmon) { |
| mutex_unlock(&perfmon->lock); |
| return; |
| } |
| |
| if (capture) |
| for (i = 0; i < perfmon->ncounters; i++) |
| perfmon->values[i] += V3D_CORE_READ(0, V3D_PCTR_0_PCTRX(i)); |
| |
| V3D_CORE_WRITE(0, V3D_V4_PCTR_0_EN, 0); |
| |
| v3d->active_perfmon = NULL; |
| mutex_unlock(&perfmon->lock); |
| } |
| |
| struct v3d_perfmon *v3d_perfmon_find(struct v3d_file_priv *v3d_priv, int id) |
| { |
| struct v3d_perfmon *perfmon; |
| |
| mutex_lock(&v3d_priv->perfmon.lock); |
| perfmon = idr_find(&v3d_priv->perfmon.idr, id); |
| v3d_perfmon_get(perfmon); |
| mutex_unlock(&v3d_priv->perfmon.lock); |
| |
| return perfmon; |
| } |
| |
| void v3d_perfmon_open_file(struct v3d_file_priv *v3d_priv) |
| { |
| mutex_init(&v3d_priv->perfmon.lock); |
| idr_init_base(&v3d_priv->perfmon.idr, 1); |
| } |
| |
| static int v3d_perfmon_idr_del(int id, void *elem, void *data) |
| { |
| struct v3d_perfmon *perfmon = elem; |
| struct v3d_dev *v3d = (struct v3d_dev *)data; |
| |
| /* If the active perfmon is being destroyed, stop it first */ |
| if (perfmon == v3d->active_perfmon) |
| v3d_perfmon_stop(v3d, perfmon, false); |
| |
| v3d_perfmon_put(perfmon); |
| |
| return 0; |
| } |
| |
| void v3d_perfmon_close_file(struct v3d_file_priv *v3d_priv) |
| { |
| struct v3d_dev *v3d = v3d_priv->v3d; |
| |
| mutex_lock(&v3d_priv->perfmon.lock); |
| idr_for_each(&v3d_priv->perfmon.idr, v3d_perfmon_idr_del, v3d); |
| idr_destroy(&v3d_priv->perfmon.idr); |
| mutex_unlock(&v3d_priv->perfmon.lock); |
| mutex_destroy(&v3d_priv->perfmon.lock); |
| } |
| |
| int v3d_perfmon_create_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct v3d_file_priv *v3d_priv = file_priv->driver_priv; |
| struct drm_v3d_perfmon_create *req = data; |
| struct v3d_dev *v3d = v3d_priv->v3d; |
| struct v3d_perfmon *perfmon; |
| unsigned int i; |
| int ret; |
| |
| /* Number of monitored counters cannot exceed HW limits. */ |
| if (req->ncounters > DRM_V3D_MAX_PERF_COUNTERS || |
| !req->ncounters) |
| return -EINVAL; |
| |
| /* Make sure all counters are valid. */ |
| for (i = 0; i < req->ncounters; i++) { |
| if (req->counters[i] >= v3d->perfmon_info.max_counters) |
| return -EINVAL; |
| } |
| |
| perfmon = kzalloc(struct_size(perfmon, values, req->ncounters), |
| GFP_KERNEL); |
| if (!perfmon) |
| return -ENOMEM; |
| |
| for (i = 0; i < req->ncounters; i++) |
| perfmon->counters[i] = req->counters[i]; |
| |
| perfmon->ncounters = req->ncounters; |
| |
| refcount_set(&perfmon->refcnt, 1); |
| mutex_init(&perfmon->lock); |
| |
| mutex_lock(&v3d_priv->perfmon.lock); |
| ret = idr_alloc(&v3d_priv->perfmon.idr, perfmon, V3D_PERFMONID_MIN, |
| V3D_PERFMONID_MAX, GFP_KERNEL); |
| mutex_unlock(&v3d_priv->perfmon.lock); |
| |
| if (ret < 0) { |
| mutex_destroy(&perfmon->lock); |
| kfree(perfmon); |
| return ret; |
| } |
| |
| req->id = ret; |
| |
| return 0; |
| } |
| |
| int v3d_perfmon_destroy_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct v3d_file_priv *v3d_priv = file_priv->driver_priv; |
| struct drm_v3d_perfmon_destroy *req = data; |
| struct v3d_perfmon *perfmon; |
| |
| mutex_lock(&v3d_priv->perfmon.lock); |
| perfmon = idr_remove(&v3d_priv->perfmon.idr, req->id); |
| mutex_unlock(&v3d_priv->perfmon.lock); |
| |
| if (!perfmon) |
| return -EINVAL; |
| |
| v3d_perfmon_put(perfmon); |
| |
| return 0; |
| } |
| |
| int v3d_perfmon_get_values_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct v3d_dev *v3d = to_v3d_dev(dev); |
| struct v3d_file_priv *v3d_priv = file_priv->driver_priv; |
| struct drm_v3d_perfmon_get_values *req = data; |
| struct v3d_perfmon *perfmon; |
| int ret = 0; |
| |
| if (req->pad != 0) |
| return -EINVAL; |
| |
| mutex_lock(&v3d_priv->perfmon.lock); |
| perfmon = idr_find(&v3d_priv->perfmon.idr, req->id); |
| v3d_perfmon_get(perfmon); |
| mutex_unlock(&v3d_priv->perfmon.lock); |
| |
| if (!perfmon) |
| return -EINVAL; |
| |
| v3d_perfmon_stop(v3d, perfmon, true); |
| |
| if (copy_to_user(u64_to_user_ptr(req->values_ptr), perfmon->values, |
| perfmon->ncounters * sizeof(u64))) |
| ret = -EFAULT; |
| |
| v3d_perfmon_put(perfmon); |
| |
| return ret; |
| } |
| |
| int v3d_perfmon_get_counter_ioctl(struct drm_device *dev, void *data, |
| struct drm_file *file_priv) |
| { |
| struct drm_v3d_perfmon_get_counter *req = data; |
| struct v3d_dev *v3d = to_v3d_dev(dev); |
| const struct v3d_perf_counter_desc *counter; |
| |
| for (int i = 0; i < ARRAY_SIZE(req->reserved); i++) { |
| if (req->reserved[i] != 0) |
| return -EINVAL; |
| } |
| |
| if (!v3d->perfmon_info.max_counters) |
| return -EOPNOTSUPP; |
| |
| /* Make sure that the counter ID is valid */ |
| if (req->counter >= v3d->perfmon_info.max_counters) |
| return -EINVAL; |
| |
| counter = &v3d->perfmon_info.counters[req->counter]; |
| |
| strscpy(req->name, counter->name, sizeof(req->name)); |
| strscpy(req->category, counter->category, sizeof(req->category)); |
| strscpy(req->description, counter->description, sizeof(req->description)); |
| |
| return 0; |
| } |