| // SPDX-License-Identifier: GPL-2.0-only |
| /******************************************************************************* |
| Copyright (C) 2007-2009 STMicroelectronics Ltd |
| |
| |
| Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> |
| *******************************************************************************/ |
| |
| #include <linux/io.h> |
| #include <linux/iopoll.h> |
| #include "common.h" |
| #include "dwmac_dma.h" |
| #include "stmmac.h" |
| |
| #define GMAC_HI_REG_AE 0x80000000 |
| |
| int dwmac_dma_reset(void __iomem *ioaddr) |
| { |
| u32 value = readl(ioaddr + DMA_BUS_MODE); |
| |
| /* DMA SW reset */ |
| value |= DMA_BUS_MODE_SFT_RESET; |
| writel(value, ioaddr + DMA_BUS_MODE); |
| |
| return readl_poll_timeout(ioaddr + DMA_BUS_MODE, value, |
| !(value & DMA_BUS_MODE_SFT_RESET), |
| 10000, 200000); |
| } |
| |
| /* CSR1 enables the transmit DMA to check for new descriptor */ |
| void dwmac_enable_dma_transmission(void __iomem *ioaddr, u32 chan) |
| { |
| writel(1, ioaddr + DMA_CHAN_XMT_POLL_DEMAND(chan)); |
| } |
| |
| void dwmac_enable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr, |
| u32 chan, bool rx, bool tx) |
| { |
| u32 value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan)); |
| |
| if (rx) |
| value |= DMA_INTR_DEFAULT_RX; |
| if (tx) |
| value |= DMA_INTR_DEFAULT_TX; |
| |
| writel(value, ioaddr + DMA_CHAN_INTR_ENA(chan)); |
| } |
| |
| void dwmac_disable_dma_irq(struct stmmac_priv *priv, void __iomem *ioaddr, |
| u32 chan, bool rx, bool tx) |
| { |
| u32 value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan)); |
| |
| if (rx) |
| value &= ~DMA_INTR_DEFAULT_RX; |
| if (tx) |
| value &= ~DMA_INTR_DEFAULT_TX; |
| |
| writel(value, ioaddr + DMA_CHAN_INTR_ENA(chan)); |
| } |
| |
| void dwmac_dma_start_tx(struct stmmac_priv *priv, void __iomem *ioaddr, |
| u32 chan) |
| { |
| u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan)); |
| value |= DMA_CONTROL_ST; |
| writel(value, ioaddr + DMA_CHAN_CONTROL(chan)); |
| } |
| |
| void dwmac_dma_stop_tx(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan) |
| { |
| u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan)); |
| value &= ~DMA_CONTROL_ST; |
| writel(value, ioaddr + DMA_CHAN_CONTROL(chan)); |
| } |
| |
| void dwmac_dma_start_rx(struct stmmac_priv *priv, void __iomem *ioaddr, |
| u32 chan) |
| { |
| u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan)); |
| value |= DMA_CONTROL_SR; |
| writel(value, ioaddr + DMA_CHAN_CONTROL(chan)); |
| } |
| |
| void dwmac_dma_stop_rx(struct stmmac_priv *priv, void __iomem *ioaddr, u32 chan) |
| { |
| u32 value = readl(ioaddr + DMA_CHAN_CONTROL(chan)); |
| value &= ~DMA_CONTROL_SR; |
| writel(value, ioaddr + DMA_CHAN_CONTROL(chan)); |
| } |
| |
| #ifdef DWMAC_DMA_DEBUG |
| static void show_tx_process_state(unsigned int status) |
| { |
| unsigned int state; |
| state = (status & DMA_STATUS_TS_MASK) >> DMA_STATUS_TS_SHIFT; |
| |
| switch (state) { |
| case 0: |
| pr_debug("- TX (Stopped): Reset or Stop command\n"); |
| break; |
| case 1: |
| pr_debug("- TX (Running): Fetching the Tx desc\n"); |
| break; |
| case 2: |
| pr_debug("- TX (Running): Waiting for end of tx\n"); |
| break; |
| case 3: |
| pr_debug("- TX (Running): Reading the data " |
| "and queuing the data into the Tx buf\n"); |
| break; |
| case 6: |
| pr_debug("- TX (Suspended): Tx Buff Underflow " |
| "or an unavailable Transmit descriptor\n"); |
| break; |
| case 7: |
| pr_debug("- TX (Running): Closing Tx descriptor\n"); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void show_rx_process_state(unsigned int status) |
| { |
| unsigned int state; |
| state = (status & DMA_STATUS_RS_MASK) >> DMA_STATUS_RS_SHIFT; |
| |
| switch (state) { |
| case 0: |
| pr_debug("- RX (Stopped): Reset or Stop command\n"); |
| break; |
| case 1: |
| pr_debug("- RX (Running): Fetching the Rx desc\n"); |
| break; |
| case 2: |
| pr_debug("- RX (Running): Checking for end of pkt\n"); |
| break; |
| case 3: |
| pr_debug("- RX (Running): Waiting for Rx pkt\n"); |
| break; |
| case 4: |
| pr_debug("- RX (Suspended): Unavailable Rx buf\n"); |
| break; |
| case 5: |
| pr_debug("- RX (Running): Closing Rx descriptor\n"); |
| break; |
| case 6: |
| pr_debug("- RX(Running): Flushing the current frame" |
| " from the Rx buf\n"); |
| break; |
| case 7: |
| pr_debug("- RX (Running): Queuing the Rx frame" |
| " from the Rx buf into memory\n"); |
| break; |
| default: |
| break; |
| } |
| } |
| #endif |
| |
| int dwmac_dma_interrupt(struct stmmac_priv *priv, void __iomem *ioaddr, |
| struct stmmac_extra_stats *x, u32 chan, u32 dir) |
| { |
| struct stmmac_pcpu_stats *stats = this_cpu_ptr(priv->xstats.pcpu_stats); |
| int ret = 0; |
| /* read the status register (CSR5) */ |
| u32 intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan)); |
| |
| #ifdef DWMAC_DMA_DEBUG |
| /* Enable it to monitor DMA rx/tx status in case of critical problems */ |
| pr_debug("%s: [CSR5: 0x%08x]\n", __func__, intr_status); |
| show_tx_process_state(intr_status); |
| show_rx_process_state(intr_status); |
| #endif |
| |
| if (dir == DMA_DIR_RX) |
| intr_status &= DMA_STATUS_MSK_RX; |
| else if (dir == DMA_DIR_TX) |
| intr_status &= DMA_STATUS_MSK_TX; |
| |
| /* ABNORMAL interrupts */ |
| if (unlikely(intr_status & DMA_STATUS_AIS)) { |
| if (unlikely(intr_status & DMA_STATUS_UNF)) { |
| ret = tx_hard_error_bump_tc; |
| x->tx_undeflow_irq++; |
| } |
| if (unlikely(intr_status & DMA_STATUS_TJT)) |
| x->tx_jabber_irq++; |
| |
| if (unlikely(intr_status & DMA_STATUS_OVF)) |
| x->rx_overflow_irq++; |
| |
| if (unlikely(intr_status & DMA_STATUS_RU)) |
| x->rx_buf_unav_irq++; |
| if (unlikely(intr_status & DMA_STATUS_RPS)) |
| x->rx_process_stopped_irq++; |
| if (unlikely(intr_status & DMA_STATUS_RWT)) |
| x->rx_watchdog_irq++; |
| if (unlikely(intr_status & DMA_STATUS_ETI)) |
| x->tx_early_irq++; |
| if (unlikely(intr_status & DMA_STATUS_TPS)) { |
| x->tx_process_stopped_irq++; |
| ret = tx_hard_error; |
| } |
| if (unlikely(intr_status & DMA_STATUS_FBI)) { |
| x->fatal_bus_error_irq++; |
| ret = tx_hard_error; |
| } |
| } |
| /* TX/RX NORMAL interrupts */ |
| if (likely(intr_status & DMA_STATUS_NIS)) { |
| if (likely(intr_status & DMA_STATUS_RI)) { |
| u32 value = readl(ioaddr + DMA_INTR_ENA); |
| /* to schedule NAPI on real RIE event. */ |
| if (likely(value & DMA_INTR_ENA_RIE)) { |
| u64_stats_update_begin(&stats->syncp); |
| u64_stats_inc(&stats->rx_normal_irq_n[chan]); |
| u64_stats_update_end(&stats->syncp); |
| ret |= handle_rx; |
| } |
| } |
| if (likely(intr_status & DMA_STATUS_TI)) { |
| u64_stats_update_begin(&stats->syncp); |
| u64_stats_inc(&stats->tx_normal_irq_n[chan]); |
| u64_stats_update_end(&stats->syncp); |
| ret |= handle_tx; |
| } |
| if (unlikely(intr_status & DMA_STATUS_ERI)) |
| x->rx_early_irq++; |
| } |
| /* Optional hardware blocks, interrupts should be disabled */ |
| if (unlikely(intr_status & |
| (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI))) |
| pr_warn("%s: unexpected status %08x\n", __func__, intr_status); |
| |
| /* Clear the interrupt by writing a logic 1 to the CSR5[15-0] */ |
| writel((intr_status & 0x1ffff), ioaddr + DMA_STATUS); |
| |
| return ret; |
| } |
| |
| void dwmac_dma_flush_tx_fifo(void __iomem *ioaddr) |
| { |
| u32 csr6 = readl(ioaddr + DMA_CONTROL); |
| writel((csr6 | DMA_CONTROL_FTF), ioaddr + DMA_CONTROL); |
| |
| do {} while ((readl(ioaddr + DMA_CONTROL) & DMA_CONTROL_FTF)); |
| } |
| |
| void stmmac_set_mac_addr(void __iomem *ioaddr, const u8 addr[6], |
| unsigned int high, unsigned int low) |
| { |
| unsigned long data; |
| |
| data = (addr[5] << 8) | addr[4]; |
| /* For MAC Addr registers we have to set the Address Enable (AE) |
| * bit that has no effect on the High Reg 0 where the bit 31 (MO) |
| * is RO. |
| */ |
| writel(data | GMAC_HI_REG_AE, ioaddr + high); |
| data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; |
| writel(data, ioaddr + low); |
| } |
| EXPORT_SYMBOL_GPL(stmmac_set_mac_addr); |
| |
| /* Enable disable MAC RX/TX */ |
| void stmmac_set_mac(void __iomem *ioaddr, bool enable) |
| { |
| u32 old_val, value; |
| |
| old_val = readl(ioaddr + MAC_CTRL_REG); |
| value = old_val; |
| |
| if (enable) |
| value |= MAC_ENABLE_RX | MAC_ENABLE_TX; |
| else |
| value &= ~(MAC_ENABLE_TX | MAC_ENABLE_RX); |
| |
| if (value != old_val) |
| writel(value, ioaddr + MAC_CTRL_REG); |
| } |
| |
| void stmmac_get_mac_addr(void __iomem *ioaddr, unsigned char *addr, |
| unsigned int high, unsigned int low) |
| { |
| unsigned int hi_addr, lo_addr; |
| |
| /* Read the MAC address from the hardware */ |
| hi_addr = readl(ioaddr + high); |
| lo_addr = readl(ioaddr + low); |
| |
| /* Extract the MAC address from the high and low words */ |
| addr[0] = lo_addr & 0xff; |
| addr[1] = (lo_addr >> 8) & 0xff; |
| addr[2] = (lo_addr >> 16) & 0xff; |
| addr[3] = (lo_addr >> 24) & 0xff; |
| addr[4] = hi_addr & 0xff; |
| addr[5] = (hi_addr >> 8) & 0xff; |
| } |
| EXPORT_SYMBOL_GPL(stmmac_get_mac_addr); |