| // SPDX-License-Identifier: ISC |
| /* |
| * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> |
| */ |
| #include <linux/kernel.h> |
| #include <linux/firmware.h> |
| #include <linux/module.h> |
| |
| #include "mt76x0.h" |
| #include "mcu.h" |
| #include "../mt76x02_usb.h" |
| |
| #define MCU_FW_URB_MAX_PAYLOAD 0x38f8 |
| #define MCU_FW_URB_SIZE (MCU_FW_URB_MAX_PAYLOAD + 12) |
| |
| static int |
| mt76x0u_upload_firmware(struct mt76x02_dev *dev, |
| const struct mt76x02_fw_header *hdr) |
| { |
| u8 *fw_payload = (u8 *)(hdr + 1); |
| u32 ilm_len, dlm_len; |
| void *ivb; |
| int err; |
| |
| ivb = kmemdup(fw_payload, MT_MCU_IVB_SIZE, GFP_KERNEL); |
| if (!ivb) |
| return -ENOMEM; |
| |
| ilm_len = le32_to_cpu(hdr->ilm_len) - MT_MCU_IVB_SIZE; |
| dev_dbg(dev->mt76.dev, "loading FW - ILM %u + IVB %u\n", |
| ilm_len, MT_MCU_IVB_SIZE); |
| err = mt76x02u_mcu_fw_send_data(dev, fw_payload + MT_MCU_IVB_SIZE, |
| ilm_len, MCU_FW_URB_MAX_PAYLOAD, |
| MT_MCU_IVB_SIZE); |
| if (err) |
| goto out; |
| |
| dlm_len = le32_to_cpu(hdr->dlm_len); |
| dev_dbg(dev->mt76.dev, "loading FW - DLM %u\n", dlm_len); |
| err = mt76x02u_mcu_fw_send_data(dev, |
| fw_payload + le32_to_cpu(hdr->ilm_len), |
| dlm_len, MCU_FW_URB_MAX_PAYLOAD, |
| MT_MCU_DLM_OFFSET); |
| if (err) |
| goto out; |
| |
| err = mt76u_vendor_request(&dev->mt76, MT_VEND_DEV_MODE, |
| USB_DIR_OUT | USB_TYPE_VENDOR, |
| 0x12, 0, ivb, MT_MCU_IVB_SIZE); |
| if (err < 0) |
| goto out; |
| |
| if (!mt76_poll_msec(dev, MT_MCU_COM_REG0, 1, 1, 1000)) { |
| dev_err(dev->mt76.dev, "Firmware failed to start\n"); |
| err = -ETIMEDOUT; |
| goto out; |
| } |
| |
| dev_dbg(dev->mt76.dev, "Firmware running!\n"); |
| |
| out: |
| kfree(ivb); |
| |
| return err; |
| } |
| |
| static int mt76x0_get_firmware(struct mt76x02_dev *dev, |
| const struct firmware **fw) |
| { |
| int err; |
| |
| /* try to load mt7610e fw if available |
| * otherwise fall back to mt7610u one |
| */ |
| err = firmware_request_nowarn(fw, MT7610E_FIRMWARE, dev->mt76.dev); |
| if (err) { |
| dev_info(dev->mt76.dev, "%s not found, switching to %s", |
| MT7610E_FIRMWARE, MT7610U_FIRMWARE); |
| return request_firmware(fw, MT7610U_FIRMWARE, |
| dev->mt76.dev); |
| } |
| return 0; |
| } |
| |
| static int mt76x0u_load_firmware(struct mt76x02_dev *dev) |
| { |
| const struct firmware *fw; |
| const struct mt76x02_fw_header *hdr; |
| int len, ret; |
| u32 val; |
| |
| mt76_wr(dev, MT_USB_DMA_CFG, (MT_USB_DMA_CFG_RX_BULK_EN | |
| MT_USB_DMA_CFG_TX_BULK_EN)); |
| |
| if (mt76x0_firmware_running(dev)) |
| return 0; |
| |
| ret = mt76x0_get_firmware(dev, &fw); |
| if (ret) |
| return ret; |
| |
| if (!fw || !fw->data || fw->size < sizeof(*hdr)) |
| goto err_inv_fw; |
| |
| hdr = (const struct mt76x02_fw_header *)fw->data; |
| |
| if (le32_to_cpu(hdr->ilm_len) <= MT_MCU_IVB_SIZE) |
| goto err_inv_fw; |
| |
| len = sizeof(*hdr); |
| len += le32_to_cpu(hdr->ilm_len); |
| len += le32_to_cpu(hdr->dlm_len); |
| |
| if (fw->size != len) |
| goto err_inv_fw; |
| |
| val = le16_to_cpu(hdr->fw_ver); |
| dev_dbg(dev->mt76.dev, |
| "Firmware Version: %d.%d.%02d Build: %x Build time: %.16s\n", |
| (val >> 12) & 0xf, (val >> 8) & 0xf, val & 0xf, |
| le16_to_cpu(hdr->build_ver), hdr->build_time); |
| |
| len = le32_to_cpu(hdr->ilm_len); |
| |
| mt76_wr(dev, 0x1004, 0x2c); |
| |
| mt76_set(dev, MT_USB_DMA_CFG, |
| (MT_USB_DMA_CFG_RX_BULK_EN | MT_USB_DMA_CFG_TX_BULK_EN) | |
| FIELD_PREP(MT_USB_DMA_CFG_RX_BULK_AGG_TOUT, 0x20)); |
| mt76x02u_mcu_fw_reset(dev); |
| usleep_range(5000, 6000); |
| |
| mt76_wr(dev, MT_FCE_PSE_CTRL, 1); |
| |
| /* FCE tx_fs_base_ptr */ |
| mt76_wr(dev, MT_TX_CPU_FROM_FCE_BASE_PTR, 0x400230); |
| /* FCE tx_fs_max_cnt */ |
| mt76_wr(dev, MT_TX_CPU_FROM_FCE_MAX_COUNT, 1); |
| /* FCE pdma enable */ |
| mt76_wr(dev, MT_FCE_PDMA_GLOBAL_CONF, 0x44); |
| /* FCE skip_fs_en */ |
| mt76_wr(dev, MT_FCE_SKIP_FS, 3); |
| |
| val = mt76_rr(dev, MT_USB_DMA_CFG); |
| val |= MT_USB_DMA_CFG_UDMA_TX_WL_DROP; |
| mt76_wr(dev, MT_USB_DMA_CFG, val); |
| val &= ~MT_USB_DMA_CFG_UDMA_TX_WL_DROP; |
| mt76_wr(dev, MT_USB_DMA_CFG, val); |
| |
| ret = mt76x0u_upload_firmware(dev, hdr); |
| mt76x02_set_ethtool_fwver(dev, hdr); |
| release_firmware(fw); |
| |
| mt76_wr(dev, MT_FCE_PSE_CTRL, 1); |
| |
| return ret; |
| |
| err_inv_fw: |
| dev_err(dev->mt76.dev, "Invalid firmware image\n"); |
| release_firmware(fw); |
| return -ENOENT; |
| } |
| |
| int mt76x0u_mcu_init(struct mt76x02_dev *dev) |
| { |
| int ret; |
| |
| ret = mt76x0u_load_firmware(dev); |
| if (ret < 0) |
| return ret; |
| |
| set_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state); |
| |
| return 0; |
| } |