| // SPDX-License-Identifier: ISC |
| /* |
| * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> |
| */ |
| |
| #include <linux/delay.h> |
| |
| #include "mt76x2u.h" |
| #include "eeprom.h" |
| #include "../mt76x02_phy.h" |
| #include "../mt76x02_usb.h" |
| |
| static void mt76x2u_init_dma(struct mt76x02_dev *dev) |
| { |
| u32 val = mt76_rr(dev, MT_VEND_ADDR(CFG, MT_USB_U3DMA_CFG)); |
| |
| val |= MT_USB_DMA_CFG_RX_DROP_OR_PAD | |
| MT_USB_DMA_CFG_RX_BULK_EN | |
| MT_USB_DMA_CFG_TX_BULK_EN; |
| |
| /* disable AGGR_BULK_RX in order to receive one |
| * frame in each rx urb and avoid copies |
| */ |
| val &= ~MT_USB_DMA_CFG_RX_BULK_AGG_EN; |
| mt76_wr(dev, MT_VEND_ADDR(CFG, MT_USB_U3DMA_CFG), val); |
| } |
| |
| static void mt76x2u_power_on_rf_patch(struct mt76x02_dev *dev) |
| { |
| mt76_set(dev, MT_VEND_ADDR(CFG, 0x130), BIT(0) | BIT(16)); |
| udelay(1); |
| |
| mt76_clear(dev, MT_VEND_ADDR(CFG, 0x1c), 0xff); |
| mt76_set(dev, MT_VEND_ADDR(CFG, 0x1c), 0x30); |
| |
| mt76_wr(dev, MT_VEND_ADDR(CFG, 0x14), 0x484f); |
| udelay(1); |
| |
| mt76_set(dev, MT_VEND_ADDR(CFG, 0x130), BIT(17)); |
| usleep_range(150, 200); |
| |
| mt76_clear(dev, MT_VEND_ADDR(CFG, 0x130), BIT(16)); |
| usleep_range(50, 100); |
| |
| mt76_set(dev, MT_VEND_ADDR(CFG, 0x14c), BIT(19) | BIT(20)); |
| } |
| |
| static void mt76x2u_power_on_rf(struct mt76x02_dev *dev, int unit) |
| { |
| int shift = unit ? 8 : 0; |
| u32 val = (BIT(1) | BIT(3) | BIT(4) | BIT(5)) << shift; |
| |
| /* Enable RF BG */ |
| mt76_set(dev, MT_VEND_ADDR(CFG, 0x130), BIT(0) << shift); |
| usleep_range(10, 20); |
| |
| /* Enable RFDIG LDO/AFE/ABB/ADDA */ |
| mt76_set(dev, MT_VEND_ADDR(CFG, 0x130), val); |
| usleep_range(10, 20); |
| |
| /* Switch RFDIG power to internal LDO */ |
| mt76_clear(dev, MT_VEND_ADDR(CFG, 0x130), BIT(2) << shift); |
| usleep_range(10, 20); |
| |
| mt76x2u_power_on_rf_patch(dev); |
| |
| mt76_set(dev, 0x530, 0xf); |
| } |
| |
| static void mt76x2u_power_on(struct mt76x02_dev *dev) |
| { |
| u32 val; |
| |
| /* Turn on WL MTCMOS */ |
| mt76_set(dev, MT_VEND_ADDR(CFG, 0x148), |
| MT_WLAN_MTC_CTRL_MTCMOS_PWR_UP); |
| |
| val = MT_WLAN_MTC_CTRL_STATE_UP | |
| MT_WLAN_MTC_CTRL_PWR_ACK | |
| MT_WLAN_MTC_CTRL_PWR_ACK_S; |
| |
| mt76_poll(dev, MT_VEND_ADDR(CFG, 0x148), val, val, 1000); |
| |
| mt76_clear(dev, MT_VEND_ADDR(CFG, 0x148), 0x7f << 16); |
| usleep_range(10, 20); |
| |
| mt76_clear(dev, MT_VEND_ADDR(CFG, 0x148), 0xf << 24); |
| usleep_range(10, 20); |
| |
| mt76_set(dev, MT_VEND_ADDR(CFG, 0x148), 0xf << 24); |
| mt76_clear(dev, MT_VEND_ADDR(CFG, 0x148), 0xfff); |
| |
| /* Turn on AD/DA power down */ |
| mt76_clear(dev, MT_VEND_ADDR(CFG, 0x1204), BIT(3)); |
| |
| /* WLAN function enable */ |
| mt76_set(dev, MT_VEND_ADDR(CFG, 0x80), BIT(0)); |
| |
| /* Release BBP software reset */ |
| mt76_clear(dev, MT_VEND_ADDR(CFG, 0x64), BIT(18)); |
| |
| mt76x2u_power_on_rf(dev, 0); |
| mt76x2u_power_on_rf(dev, 1); |
| } |
| |
| static int mt76x2u_init_eeprom(struct mt76x02_dev *dev) |
| { |
| u32 val, i; |
| |
| dev->mt76.eeprom.data = devm_kzalloc(dev->mt76.dev, |
| MT7612U_EEPROM_SIZE, |
| GFP_KERNEL); |
| dev->mt76.eeprom.size = MT7612U_EEPROM_SIZE; |
| if (!dev->mt76.eeprom.data) |
| return -ENOMEM; |
| |
| for (i = 0; i + 4 <= MT7612U_EEPROM_SIZE; i += 4) { |
| val = mt76_rr(dev, MT_VEND_ADDR(EEPROM, i)); |
| put_unaligned_le32(val, dev->mt76.eeprom.data + i); |
| } |
| |
| mt76x02_eeprom_parse_hw_cap(dev); |
| return 0; |
| } |
| |
| int mt76x2u_init_hardware(struct mt76x02_dev *dev) |
| { |
| int i, k, err; |
| |
| mt76x2_reset_wlan(dev, true); |
| mt76x2u_power_on(dev); |
| |
| if (!mt76x02_wait_for_mac(&dev->mt76)) |
| return -ETIMEDOUT; |
| |
| err = mt76x2u_mcu_fw_init(dev); |
| if (err < 0) |
| return err; |
| |
| if (!mt76_poll_msec(dev, MT_WPDMA_GLO_CFG, |
| MT_WPDMA_GLO_CFG_TX_DMA_BUSY | |
| MT_WPDMA_GLO_CFG_RX_DMA_BUSY, 0, 100)) |
| return -EIO; |
| |
| /* wait for asic ready after fw load. */ |
| if (!mt76x02_wait_for_mac(&dev->mt76)) |
| return -ETIMEDOUT; |
| |
| mt76x2u_init_dma(dev); |
| |
| err = mt76x2u_mcu_init(dev); |
| if (err < 0) |
| return err; |
| |
| err = mt76x2u_mac_reset(dev); |
| if (err < 0) |
| return err; |
| |
| mt76x02_mac_setaddr(dev, dev->mt76.eeprom.data + MT_EE_MAC_ADDR); |
| dev->mt76.rxfilter = mt76_rr(dev, MT_RX_FILTR_CFG); |
| |
| if (!mt76x02_wait_for_txrx_idle(&dev->mt76)) |
| return -ETIMEDOUT; |
| |
| /* reset wcid table */ |
| for (i = 0; i < 256; i++) |
| mt76x02_mac_wcid_setup(dev, i, 0, NULL); |
| |
| /* reset shared key table and pairwise key table */ |
| for (i = 0; i < 16; i++) { |
| for (k = 0; k < 4; k++) |
| mt76x02_mac_shared_key_setup(dev, i, k, NULL); |
| } |
| |
| mt76x02u_init_beacon_config(dev); |
| |
| mt76_rmw(dev, MT_US_CYC_CFG, MT_US_CYC_CNT, 0x1e); |
| mt76_wr(dev, MT_TXOP_CTRL_CFG, 0x583f); |
| |
| err = mt76x2_mcu_load_cr(dev, MT_RF_BBP_CR, 0, 0); |
| if (err < 0) |
| return err; |
| |
| mt76x02_phy_set_rxpath(dev); |
| mt76x02_phy_set_txdac(dev); |
| |
| return mt76x2u_mac_stop(dev); |
| } |
| |
| int mt76x2u_register_device(struct mt76x02_dev *dev) |
| { |
| struct ieee80211_hw *hw = mt76_hw(dev); |
| struct mt76_usb *usb = &dev->mt76.usb; |
| int err; |
| |
| INIT_DELAYED_WORK(&dev->cal_work, mt76x2u_phy_calibrate); |
| err = mt76x02_init_device(dev); |
| if (err) |
| return err; |
| |
| err = mt76x2u_init_eeprom(dev); |
| if (err < 0) |
| return err; |
| |
| usb->mcu.data = devm_kmalloc(dev->mt76.dev, MCU_RESP_URB_SIZE, |
| GFP_KERNEL); |
| if (!usb->mcu.data) |
| return -ENOMEM; |
| |
| err = mt76u_alloc_queues(&dev->mt76); |
| if (err < 0) |
| goto fail; |
| |
| err = mt76x2u_init_hardware(dev); |
| if (err < 0) |
| goto fail; |
| |
| /* check hw sg support in order to enable AMSDU */ |
| hw->max_tx_fragments = dev->mt76.usb.sg_en ? MT_TX_SG_MAX_SIZE : 1; |
| err = mt76_register_device(&dev->mt76, true, mt76x02_rates, |
| ARRAY_SIZE(mt76x02_rates)); |
| if (err) |
| goto fail; |
| |
| set_bit(MT76_STATE_INITIALIZED, &dev->mphy.state); |
| |
| mt76x02_init_debugfs(dev); |
| mt76x2_init_txpower(dev, &dev->mphy.sband_2g.sband); |
| mt76x2_init_txpower(dev, &dev->mphy.sband_5g.sband); |
| |
| return 0; |
| |
| fail: |
| mt76x2u_cleanup(dev); |
| return err; |
| } |
| |
| void mt76x2u_stop_hw(struct mt76x02_dev *dev) |
| { |
| cancel_delayed_work_sync(&dev->cal_work); |
| cancel_delayed_work_sync(&dev->mphy.mac_work); |
| mt76x2u_mac_stop(dev); |
| } |
| |
| void mt76x2u_cleanup(struct mt76x02_dev *dev) |
| { |
| mt76x02_mcu_set_radio_state(dev, false); |
| mt76x2u_stop_hw(dev); |
| mt76u_queues_deinit(&dev->mt76); |
| } |