| // SPDX-License-Identifier: ISC |
| /* Copyright (C) 2023 MediaTek Inc. */ |
| |
| #include <linux/etherdevice.h> |
| #include <linux/hwmon.h> |
| #include <linux/hwmon-sysfs.h> |
| #include <linux/thermal.h> |
| #include <linux/firmware.h> |
| #include "mt7925.h" |
| #include "mac.h" |
| #include "mcu.h" |
| |
| static ssize_t mt7925_thermal_temp_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| switch (to_sensor_dev_attr(attr)->index) { |
| case 0: { |
| struct mt792x_phy *phy = dev_get_drvdata(dev); |
| struct mt792x_dev *mdev = phy->dev; |
| int temperature; |
| |
| mt792x_mutex_acquire(mdev); |
| temperature = mt7925_mcu_get_temperature(phy); |
| mt792x_mutex_release(mdev); |
| |
| if (temperature < 0) |
| return temperature; |
| /* display in millidegree Celsius */ |
| return sprintf(buf, "%u\n", temperature * 1000); |
| } |
| default: |
| return -EINVAL; |
| } |
| } |
| static SENSOR_DEVICE_ATTR_RO(temp1_input, mt7925_thermal_temp, 0); |
| |
| static struct attribute *mt7925_hwmon_attrs[] = { |
| &sensor_dev_attr_temp1_input.dev_attr.attr, |
| NULL, |
| }; |
| ATTRIBUTE_GROUPS(mt7925_hwmon); |
| |
| static int mt7925_thermal_init(struct mt792x_phy *phy) |
| { |
| struct wiphy *wiphy = phy->mt76->hw->wiphy; |
| struct device *hwmon; |
| const char *name; |
| |
| if (!IS_REACHABLE(CONFIG_HWMON)) |
| return 0; |
| |
| name = devm_kasprintf(&wiphy->dev, GFP_KERNEL, "mt7925_%s", |
| wiphy_name(wiphy)); |
| |
| hwmon = devm_hwmon_device_register_with_groups(&wiphy->dev, name, phy, |
| mt7925_hwmon_groups); |
| return PTR_ERR_OR_ZERO(hwmon); |
| } |
| static void |
| mt7925_regd_notifier(struct wiphy *wiphy, |
| struct regulatory_request *req) |
| { |
| struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); |
| struct mt792x_dev *dev = mt792x_hw_dev(hw); |
| struct mt76_dev *mdev = &dev->mt76; |
| |
| /* allow world regdom at the first boot only */ |
| if (!memcmp(req->alpha2, "00", 2) && |
| mdev->alpha2[0] && mdev->alpha2[1]) |
| return; |
| |
| /* do not need to update the same country twice */ |
| if (!memcmp(req->alpha2, mdev->alpha2, 2) && |
| dev->country_ie_env == req->country_ie_env) |
| return; |
| |
| memcpy(mdev->alpha2, req->alpha2, 2); |
| mdev->region = req->dfs_region; |
| dev->country_ie_env = req->country_ie_env; |
| |
| mt792x_mutex_acquire(dev); |
| mt7925_mcu_set_clc(dev, req->alpha2, req->country_ie_env); |
| mt7925_mcu_set_channel_domain(hw->priv); |
| mt7925_set_tx_sar_pwr(hw, NULL); |
| mt792x_mutex_release(dev); |
| } |
| |
| static void mt7925_mac_init_basic_rates(struct mt792x_dev *dev) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(mt76_rates); i++) { |
| u16 rate = mt76_rates[i].hw_value; |
| u16 idx = MT792x_BASIC_RATES_TBL + i; |
| |
| rate = FIELD_PREP(MT_TX_RATE_MODE, rate >> 8) | |
| FIELD_PREP(MT_TX_RATE_IDX, rate & GENMASK(7, 0)); |
| mt7925_mac_set_fixed_rate_table(dev, idx, rate); |
| } |
| } |
| |
| int mt7925_mac_init(struct mt792x_dev *dev) |
| { |
| int i; |
| |
| mt76_rmw_field(dev, MT_MDP_DCR1, MT_MDP_DCR1_MAX_RX_LEN, 1536); |
| /* enable hardware de-agg */ |
| mt76_set(dev, MT_MDP_DCR0, MT_MDP_DCR0_DAMSDU_EN); |
| |
| for (i = 0; i < MT792x_WTBL_SIZE; i++) |
| mt7925_mac_wtbl_update(dev, i, |
| MT_WTBL_UPDATE_ADM_COUNT_CLEAR); |
| for (i = 0; i < 2; i++) |
| mt792x_mac_init_band(dev, i); |
| |
| mt7925_mac_init_basic_rates(dev); |
| |
| memzero_explicit(&dev->mt76.alpha2, sizeof(dev->mt76.alpha2)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mt7925_mac_init); |
| |
| static int __mt7925_init_hardware(struct mt792x_dev *dev) |
| { |
| int ret; |
| |
| ret = mt792x_mcu_init(dev); |
| if (ret) |
| goto out; |
| |
| mt76_eeprom_override(&dev->mphy); |
| |
| ret = mt7925_mcu_set_eeprom(dev); |
| if (ret) |
| goto out; |
| |
| ret = mt7925_mac_init(dev); |
| if (ret) |
| goto out; |
| |
| out: |
| return ret; |
| } |
| |
| static int mt7925_init_hardware(struct mt792x_dev *dev) |
| { |
| int ret, i; |
| |
| set_bit(MT76_STATE_INITIALIZED, &dev->mphy.state); |
| |
| for (i = 0; i < MT792x_MCU_INIT_RETRY_COUNT; i++) { |
| ret = __mt7925_init_hardware(dev); |
| if (!ret) |
| break; |
| |
| mt792x_init_reset(dev); |
| } |
| |
| if (i == MT792x_MCU_INIT_RETRY_COUNT) { |
| dev_err(dev->mt76.dev, "hardware init failed\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void mt7925_init_work(struct work_struct *work) |
| { |
| struct mt792x_dev *dev = container_of(work, struct mt792x_dev, |
| init_work); |
| int ret; |
| |
| ret = mt7925_init_hardware(dev); |
| if (ret) |
| return; |
| |
| mt76_set_stream_caps(&dev->mphy, true); |
| mt7925_set_stream_he_eht_caps(&dev->phy); |
| |
| ret = mt7925_init_mlo_caps(&dev->phy); |
| if (ret) { |
| dev_err(dev->mt76.dev, "MLO init failed\n"); |
| return; |
| } |
| |
| ret = mt76_register_device(&dev->mt76, true, mt76_rates, |
| ARRAY_SIZE(mt76_rates)); |
| if (ret) { |
| dev_err(dev->mt76.dev, "register device failed\n"); |
| return; |
| } |
| |
| ret = mt7925_init_debugfs(dev); |
| if (ret) { |
| dev_err(dev->mt76.dev, "register debugfs failed\n"); |
| return; |
| } |
| |
| ret = mt7925_thermal_init(&dev->phy); |
| if (ret) { |
| dev_err(dev->mt76.dev, "thermal init failed\n"); |
| return; |
| } |
| |
| /* we support chip reset now */ |
| dev->hw_init_done = true; |
| |
| mt7925_mcu_set_deep_sleep(dev, dev->pm.ds_enable); |
| } |
| |
| int mt7925_register_device(struct mt792x_dev *dev) |
| { |
| struct ieee80211_hw *hw = mt76_hw(dev); |
| int ret; |
| |
| dev->phy.dev = dev; |
| dev->phy.mt76 = &dev->mt76.phy; |
| dev->mt76.phy.priv = &dev->phy; |
| dev->mt76.tx_worker.fn = mt792x_tx_worker; |
| |
| INIT_DELAYED_WORK(&dev->pm.ps_work, mt792x_pm_power_save_work); |
| INIT_WORK(&dev->pm.wake_work, mt792x_pm_wake_work); |
| spin_lock_init(&dev->pm.wake.lock); |
| mutex_init(&dev->pm.mutex); |
| init_waitqueue_head(&dev->pm.wait); |
| spin_lock_init(&dev->pm.txq_lock); |
| INIT_DELAYED_WORK(&dev->mphy.mac_work, mt792x_mac_work); |
| INIT_DELAYED_WORK(&dev->phy.scan_work, mt7925_scan_work); |
| INIT_DELAYED_WORK(&dev->coredump.work, mt7925_coredump_work); |
| #if IS_ENABLED(CONFIG_IPV6) |
| INIT_WORK(&dev->ipv6_ns_work, mt7925_set_ipv6_ns_work); |
| skb_queue_head_init(&dev->ipv6_ns_list); |
| #endif |
| skb_queue_head_init(&dev->phy.scan_event_list); |
| skb_queue_head_init(&dev->coredump.msg_list); |
| |
| INIT_WORK(&dev->reset_work, mt7925_mac_reset_work); |
| INIT_WORK(&dev->init_work, mt7925_init_work); |
| |
| INIT_WORK(&dev->phy.roc_work, mt7925_roc_work); |
| timer_setup(&dev->phy.roc_timer, mt792x_roc_timer, 0); |
| init_waitqueue_head(&dev->phy.roc_wait); |
| |
| dev->pm.idle_timeout = MT792x_PM_TIMEOUT; |
| dev->pm.stats.last_wake_event = jiffies; |
| dev->pm.stats.last_doze_event = jiffies; |
| if (!mt76_is_usb(&dev->mt76)) { |
| dev->pm.enable_user = true; |
| dev->pm.enable = true; |
| dev->pm.ds_enable_user = true; |
| dev->pm.ds_enable = true; |
| } |
| |
| if (!mt76_is_mmio(&dev->mt76)) |
| hw->extra_tx_headroom += MT_SDIO_TXD_SIZE + MT_SDIO_HDR_SIZE; |
| |
| mt792x_init_acpi_sar(dev); |
| |
| ret = mt792x_init_wcid(dev); |
| if (ret) |
| return ret; |
| |
| ret = mt792x_init_wiphy(hw); |
| if (ret) |
| return ret; |
| |
| hw->wiphy->reg_notifier = mt7925_regd_notifier; |
| dev->mphy.sband_2g.sband.ht_cap.cap |= |
| IEEE80211_HT_CAP_LDPC_CODING | |
| IEEE80211_HT_CAP_MAX_AMSDU; |
| dev->mphy.sband_2g.sband.ht_cap.ampdu_density = |
| IEEE80211_HT_MPDU_DENSITY_2; |
| dev->mphy.sband_5g.sband.ht_cap.cap |= |
| IEEE80211_HT_CAP_LDPC_CODING | |
| IEEE80211_HT_CAP_MAX_AMSDU; |
| dev->mphy.sband_2g.sband.ht_cap.ampdu_density = |
| IEEE80211_HT_MPDU_DENSITY_1; |
| dev->mphy.sband_5g.sband.vht_cap.cap |= |
| IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 | |
| IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK | |
| IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE | |
| IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE | |
| (3 << IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT); |
| dev->mphy.sband_5g.sband.vht_cap.cap |= |
| IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ | |
| IEEE80211_VHT_CAP_SHORT_GI_160; |
| |
| dev->mphy.hw->wiphy->available_antennas_rx = dev->mphy.chainmask; |
| dev->mphy.hw->wiphy->available_antennas_tx = dev->mphy.chainmask; |
| |
| queue_work(system_wq, &dev->init_work); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mt7925_register_device); |