drivers/phy/broadcom/phy-brcm-usb-init-synopsys.c - linux - Git at Google

 // SPDX-License-Identifier: GPL-2.0
 /* Copyright (c) 2018, Broadcom */

 /*
  * This module contains USB PHY initialization for power up and S3 resume
  * for newer Synopsys based USB hardware first used on the bcm7216.
  */

 #include <linux/delay.h>
 #include <linux/io.h>

 #include <linux/soc/brcmstb/brcmstb.h>
 #include "phy-brcm-usb-init.h"

 #define PHY_LOCK_TIMEOUT_MS 200

 /* Register definitions for syscon piarbctl registers */
 #define PIARBCTL_CAM			0x00
 #define PIARBCTL_SPLITTER		0x04
 #define PIARBCTL_MISC			0x08
 #define   PIARBCTL_MISC_SATA_PRIORITY_MASK		GENMASK(3, 0)
 #define   PIARBCTL_MISC_CAM0_MEM_PAGE_MASK		GENMASK(7, 4)
 #define   PIARBCTL_MISC_CAM1_MEM_PAGE_MASK		GENMASK(11, 8)
 #define   PIARBCTL_MISC_USB_MEM_PAGE_MASK		GENMASK(15, 12)
 #define   PIARBCTL_MISC_USB_PRIORITY_MASK		GENMASK(19, 16)
 #define   PIARBCTL_MISC_USB_4G_SDRAM_MASK		BIT(29)
 #define   PIARBCTL_MISC_USB_SELECT_MASK			BIT(30)
 #define   PIARBCTL_MISC_SECURE_MASK			BIT(31)

 #define PIARBCTL_MISC_USB_ONLY_MASK		\
 	(PIARBCTL_MISC_USB_SELECT_MASK |	\
 	 PIARBCTL_MISC_USB_4G_SDRAM_MASK |	\
 	 PIARBCTL_MISC_USB_PRIORITY_MASK |	\
 	 PIARBCTL_MISC_USB_MEM_PAGE_MASK)

 /* Register definitions for the USB CTRL block */
 #define USB_CTRL_SETUP			0x00
 #define   USB_CTRL_SETUP_IOC_MASK			BIT(4)
 #define   USB_CTRL_SETUP_IPP_MASK			BIT(5)
 #define   USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK		BIT(9)
 #define   USB_CTRL_SETUP_SCB1_EN_MASK			BIT(14)
 #define   USB_CTRL_SETUP_SCB2_EN_MASK			BIT(15)
 #define   USB_CTRL_SETUP_tca_drv_sel_MASK		BIT(24)
 #define   USB_CTRL_SETUP_STRAP_IPP_SEL_MASK		BIT(25)
 #define USB_CTRL_USB_PM			0x04
 #define   USB_CTRL_USB_PM_XHC_S2_CLK_SWITCH_EN_MASK	BIT(3)
 #define   USB_CTRL_USB_PM_XHC_PME_EN_MASK		BIT(4)
 #define   USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK		BIT(22)
 #define   USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK		BIT(23)
 #define   USB_CTRL_USB_PM_SOFT_RESET_MASK		BIT(30)
 #define   USB_CTRL_USB_PM_USB_PWRDN_MASK		BIT(31)
 #define USB_CTRL_USB_PM_STATUS		0x08
 #define USB_CTRL_USB_DEVICE_CTL1	0x10
 #define   USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK	GENMASK(1, 0)
 #define USB_CTRL_TEST_PORT_CTL		0x30
 #define   USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_MASK		GENMASK(7, 0)
 #define   USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_PME_GEN_MASK	0x0000002e
 #define USB_CTRL_TP_DIAG1		0x34
 #define   USB_CTLR_TP_DIAG1_wake_MASK			BIT(1)
 #define USB_CTRL_CTLR_CSHCR		0x50
 #define   USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK		BIT(18)
 #define USB_CTRL_P0_U2PHY_CFG1		0x68
 #define   USB_CTRL_P0_U2PHY_CFG1_COMMONONN_MASK		BIT(10)

 /* Register definitions for the USB_PHY block in 7211b0 */
 #define USB_PHY_PLL_CTL			0x00
 #define   USB_PHY_PLL_CTL_PLL_SUSPEND_MASK		BIT(27)
 #define   USB_PHY_PLL_CTL_PLL_RESETB_MASK		BIT(30)
 #define USB_PHY_PLL_LDO_CTL		0x08
 #define   USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK	BIT(0)
 #define   USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK	BIT(1)
 #define   USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK		BIT(2)
 #define USB_PHY_UTMI_CTL_1		0x04
 #define   USB_PHY_UTMI_CTL_1_PHY_MODE_MASK		GENMASK(3, 2)
 #define   USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT		2
 #define   USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK	BIT(11)
 #define USB_PHY_IDDQ			0x1c
 #define   USB_PHY_IDDQ_phy_iddq_MASK			BIT(0)
 #define USB_PHY_STATUS			0x20
 #define   USB_PHY_STATUS_pll_lock_MASK			BIT(0)

 /* Register definitions for the MDIO registers in the DWC2 block of
  * the 7211b0.
  * NOTE: The PHY's MDIO registers are only accessible through the
  * legacy DesignWare USB controller even though it's not being used.
  */
 #define USB_GMDIOCSR	0
 #define USB_GMDIOGEN	4

 /* Register definitions for the BDC EC block in 7211b0 */
 #define BDC_EC_AXIRDA			0x0c
 #define   BDC_EC_AXIRDA_RTS_MASK			GENMASK(31, 28)
 #define   BDC_EC_AXIRDA_RTS_SHIFT			28

 #define USB_XHCI_GBL_GUSB2PHYCFG	0x100
 #define   USB_XHCI_GBL_GUSB2PHYCFG_U2_FREECLK_EXISTS_MASK	BIT(30)

 static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params,
 				  uint8_t addr, uint16_t data)
 {
 	void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO];

 	addr &= 0x1f; /* 5-bit address */
 	brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN);
 	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
 		;
 	brcm_usb_writel(0x59020000 | (addr << 18) | data,
 			usb_mdio + USB_GMDIOGEN);
 	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
 		;
 	brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN);
 	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
 		;
 }

 static uint16_t __maybe_unused usb_mdio_read_7211b0(
 	struct brcm_usb_init_params *params, uint8_t addr)
 {
 	void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO];

 	addr &= 0x1f; /* 5-bit address */
 	brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN);
 	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
 		;
 	brcm_usb_writel(0x69020000 | (addr << 18), usb_mdio + USB_GMDIOGEN);
 	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
 		;
 	brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN);
 	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
 		;
 	return brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & 0xffff;
 }

 static void usb2_eye_fix_7211b0(struct brcm_usb_init_params *params)
 {
 	/* select bank */
 	usb_mdio_write_7211b0(params, 0x1f, 0x80a0);

 	/* Set the eye */
 	usb_mdio_write_7211b0(params, 0x0a, 0xc6a0);
 }

 static void xhci_soft_reset(struct brcm_usb_init_params *params,
 			int on_off)
 {
 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 	void __iomem *xhci_gbl = params->regs[BRCM_REGS_XHCI_GBL];

 	/* Assert reset */
 	if (on_off) {
 		USB_CTRL_UNSET(ctrl, USB_PM, XHC_SOFT_RESETB);
 	/* De-assert reset */
 	} else {
 		USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB);
 		/* Required for COMMONONN to be set */
 		if (params->supported_port_modes != USB_CTLR_MODE_DRD)
 			USB_XHCI_GBL_UNSET(xhci_gbl, GUSB2PHYCFG,
 					   U2_FREECLK_EXISTS);
 	}
 }

 static void usb_init_ipp(struct brcm_usb_init_params *params)
 {
 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 	u32 reg;
 	u32 orig_reg;

 	pr_debug("%s\n", __func__);

 	orig_reg = reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
 	if (params->ipp != 2)
 		/* override ipp strap pin (if it exits) */
 		reg &= ~(USB_CTRL_MASK(SETUP, STRAP_IPP_SEL));

 	/* Override the default OC and PP polarity */
 	reg &= ~(USB_CTRL_MASK(SETUP, IPP) | USB_CTRL_MASK(SETUP, IOC));
 	if (params->ioc)
 		reg |= USB_CTRL_MASK(SETUP, IOC);
 	if (params->ipp == 1)
 		reg |= USB_CTRL_MASK(SETUP, IPP);
 	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));

 	/*
 	 * If we're changing IPP, make sure power is off long enough
 	 * to turn off any connected devices.
 	 */
 	if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP))
 		msleep(50);
 }

 static void syscon_piarbctl_init(struct regmap *rmap)
 {
 	/* Switch from legacy USB OTG controller to new STB USB controller */
 	regmap_update_bits(rmap, PIARBCTL_MISC, PIARBCTL_MISC_USB_ONLY_MASK,
 			   PIARBCTL_MISC_USB_SELECT_MASK |
 			   PIARBCTL_MISC_USB_4G_SDRAM_MASK);
 }

 static void usb_init_common(struct brcm_usb_init_params *params)
 {
 	u32 reg;
 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

 	pr_debug("%s\n", __func__);

 	if (USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE)) {
 		reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 		reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
 		reg |= params->port_mode;
 		brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 	}
 	switch (params->supported_port_modes) {
 	case USB_CTLR_MODE_HOST:
 		USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
 		break;
 	default:
 		USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
 		USB_CTRL_SET(ctrl, USB_PM, BDC_SOFT_RESETB);
 		break;
 	}
 }

 static void usb_wake_enable_7211b0(struct brcm_usb_init_params *params,
 				   bool enable)
 {
 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

 	if (enable)
 		USB_CTRL_SET(ctrl, CTLR_CSHCR, ctl_pme_en);
 	else
 		USB_CTRL_UNSET(ctrl, CTLR_CSHCR, ctl_pme_en);
 }

 static void usb_wake_enable_7216(struct brcm_usb_init_params *params,
 				 bool enable)
 {
 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

 	if (enable)
 		USB_CTRL_SET(ctrl, USB_PM, XHC_PME_EN);
 	else
 		USB_CTRL_UNSET(ctrl, USB_PM, XHC_PME_EN);
 }

 static void usb_init_common_7211b0(struct brcm_usb_init_params *params)
 {
 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 	void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY];
 	void __iomem *bdc_ec = params->regs[BRCM_REGS_BDC_EC];
 	int timeout_ms = PHY_LOCK_TIMEOUT_MS;
 	u32 reg;

 	if (params->syscon_piarbctl)
 		syscon_piarbctl_init(params->syscon_piarbctl);

 	USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);

 	usb_wake_enable_7211b0(params, false);
 	if (!params->wake_enabled) {

 		/* undo possible suspend settings */
 		brcm_usb_writel(0, usb_phy + USB_PHY_IDDQ);
 		reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
 		reg |= USB_PHY_PLL_CTL_PLL_RESETB_MASK;
 		brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);

 		/* temporarily enable FSM so PHY comes up properly */
 		reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
 		reg |= USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK;
 		brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
 	}

 	/* Disable PLL auto suspend */
 	reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
 	reg |= USB_PHY_PLL_CTL_PLL_SUSPEND_MASK;
 	brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);

 	/* Init the PHY */
 	reg = USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK |
 		USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK |
 		USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK;
 	brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL);

 	/* wait for lock */
 	while (timeout_ms-- > 0) {
 		reg = brcm_usb_readl(usb_phy + USB_PHY_STATUS);
 		if (reg & USB_PHY_STATUS_pll_lock_MASK)
 			break;
 		usleep_range(1000, 2000);
 	}

 	/* Set the PHY_MODE */
 	reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
 	reg &= ~USB_PHY_UTMI_CTL_1_PHY_MODE_MASK;
 	reg |= params->supported_port_modes << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT;
 	brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);

 	usb_init_common(params);

 	/*
 	 * The BDC controller will get occasional failures with
 	 * the default "Read Transaction Size" of 6 (1024 bytes).
 	 * Set it to 4 (256 bytes).
 	 */
 	if ((params->supported_port_modes != USB_CTLR_MODE_HOST) && bdc_ec) {
 		reg = brcm_usb_readl(bdc_ec + BDC_EC_AXIRDA);
 		reg &= ~BDC_EC_AXIRDA_RTS_MASK;
 		reg |= (0x4 << BDC_EC_AXIRDA_RTS_SHIFT);
 		brcm_usb_writel(reg, bdc_ec + BDC_EC_AXIRDA);
 	}

 	/*
 	 * Disable FSM, otherwise the PHY will auto suspend when no
 	 * device is connected and will be reset on resume.
 	 */
 	reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
 	reg &= ~USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK;
 	brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);

 	usb2_eye_fix_7211b0(params);
 }

 static void usb_init_common_7216(struct brcm_usb_init_params *params)
 {
 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

 	USB_CTRL_UNSET(ctrl, USB_PM, XHC_S2_CLK_SWITCH_EN);
 	USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);

 	/* 1 millisecond - for USB clocks to settle down */
 	usleep_range(1000, 2000);

 	/*
 	 * Disable PHY when port is suspended
 	 * Does not work in DRD mode
 	 */
 	if (params->supported_port_modes != USB_CTLR_MODE_DRD)
 		USB_CTRL_SET(ctrl, P0_U2PHY_CFG1, COMMONONN);

 	usb_wake_enable_7216(params, false);
 	usb_init_common(params);
 }

 static void usb_init_xhci(struct brcm_usb_init_params *params)
 {
 	pr_debug("%s\n", __func__);

 	xhci_soft_reset(params, 0);
 }

 static void usb_uninit_common_7216(struct brcm_usb_init_params *params)
 {
 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

 	pr_debug("%s\n", __func__);

 	if (params->wake_enabled) {
 		/* Switch to using slower clock during suspend to save power */
 		USB_CTRL_SET(ctrl, USB_PM, XHC_S2_CLK_SWITCH_EN);
 		usb_wake_enable_7216(params, true);
 	} else {
 		USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
 	}
 }

 static void usb_uninit_common_7211b0(struct brcm_usb_init_params *params)
 {
 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 	void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY];
 	u32 reg;

 	pr_debug("%s\n", __func__);

 	if (params->wake_enabled) {
 		USB_CTRL_SET(ctrl, TEST_PORT_CTL, TPOUT_SEL_PME_GEN);
 		usb_wake_enable_7211b0(params, true);
 	} else {
 		USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
 		brcm_usb_writel(0, usb_phy + USB_PHY_PLL_LDO_CTL);
 		reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
 		reg &= ~USB_PHY_PLL_CTL_PLL_RESETB_MASK;
 		brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);
 		brcm_usb_writel(USB_PHY_IDDQ_phy_iddq_MASK,
 				usb_phy + USB_PHY_IDDQ);
 	}

 }

 static void usb_uninit_xhci(struct brcm_usb_init_params *params)
 {

 	pr_debug("%s\n", __func__);

 	if (!params->wake_enabled)
 		xhci_soft_reset(params, 1);
 }

 static int usb_get_dual_select(struct brcm_usb_init_params *params)
 {
 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 	u32 reg = 0;

 	pr_debug("%s\n", __func__);

 	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 	reg &= USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
 	return reg;
 }

 static void usb_set_dual_select(struct brcm_usb_init_params *params)
 {
 	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
 	u32 reg;

 	pr_debug("%s\n", __func__);

 	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 	reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
 	reg |= params->port_mode;
 	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
 }

 static const struct brcm_usb_init_ops bcm7216_ops = {
 	.init_ipp = usb_init_ipp,
 	.init_common = usb_init_common_7216,
 	.init_xhci = usb_init_xhci,
 	.uninit_common = usb_uninit_common_7216,
 	.uninit_xhci = usb_uninit_xhci,
 	.get_dual_select = usb_get_dual_select,
 	.set_dual_select = usb_set_dual_select,
 };

 static const struct brcm_usb_init_ops bcm7211b0_ops = {
 	.init_ipp = usb_init_ipp,
 	.init_common = usb_init_common_7211b0,
 	.init_xhci = usb_init_xhci,
 	.uninit_common = usb_uninit_common_7211b0,
 	.uninit_xhci = usb_uninit_xhci,
 	.get_dual_select = usb_get_dual_select,
 	.set_dual_select = usb_set_dual_select,
 };

 void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params)
 {

 	pr_debug("%s\n", __func__);

 	params->family_name = "7216";
 	params->ops = &bcm7216_ops;
 }

 void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params)
 {

 	pr_debug("%s\n", __func__);

 	params->family_name = "7211";
 	params->ops = &bcm7211b0_ops;
 }
	// SPDX-License-Identifier: GPL-2.0
	/* Copyright (c) 2018, Broadcom */

	/*
	* This module contains USB PHY initialization for power up and S3 resume
	* for newer Synopsys based USB hardware first used on the bcm7216.
	*/

	#include <linux/delay.h>
	#include <linux/io.h>

	#include <linux/soc/brcmstb/brcmstb.h>
	#include "phy-brcm-usb-init.h"

	#define PHY_LOCK_TIMEOUT_MS 200

	/* Register definitions for syscon piarbctl registers */
	#define PIARBCTL_CAM 0x00
	#define PIARBCTL_SPLITTER 0x04
	#define PIARBCTL_MISC 0x08
	#define PIARBCTL_MISC_SATA_PRIORITY_MASK GENMASK(3, 0)
	#define PIARBCTL_MISC_CAM0_MEM_PAGE_MASK GENMASK(7, 4)
	#define PIARBCTL_MISC_CAM1_MEM_PAGE_MASK GENMASK(11, 8)
	#define PIARBCTL_MISC_USB_MEM_PAGE_MASK GENMASK(15, 12)
	#define PIARBCTL_MISC_USB_PRIORITY_MASK GENMASK(19, 16)
	#define PIARBCTL_MISC_USB_4G_SDRAM_MASK BIT(29)
	#define PIARBCTL_MISC_USB_SELECT_MASK BIT(30)
	#define PIARBCTL_MISC_SECURE_MASK BIT(31)

	#define PIARBCTL_MISC_USB_ONLY_MASK \
	(PIARBCTL_MISC_USB_SELECT_MASK \| \
	PIARBCTL_MISC_USB_4G_SDRAM_MASK \| \
	PIARBCTL_MISC_USB_PRIORITY_MASK \| \
	PIARBCTL_MISC_USB_MEM_PAGE_MASK)

	/* Register definitions for the USB CTRL block */
	#define USB_CTRL_SETUP 0x00
	#define USB_CTRL_SETUP_IOC_MASK BIT(4)
	#define USB_CTRL_SETUP_IPP_MASK BIT(5)
	#define USB_CTRL_SETUP_SOFT_SHUTDOWN_MASK BIT(9)
	#define USB_CTRL_SETUP_SCB1_EN_MASK BIT(14)
	#define USB_CTRL_SETUP_SCB2_EN_MASK BIT(15)
	#define USB_CTRL_SETUP_tca_drv_sel_MASK BIT(24)
	#define USB_CTRL_SETUP_STRAP_IPP_SEL_MASK BIT(25)
	#define USB_CTRL_USB_PM 0x04
	#define USB_CTRL_USB_PM_XHC_S2_CLK_SWITCH_EN_MASK BIT(3)
	#define USB_CTRL_USB_PM_XHC_PME_EN_MASK BIT(4)
	#define USB_CTRL_USB_PM_XHC_SOFT_RESETB_MASK BIT(22)
	#define USB_CTRL_USB_PM_BDC_SOFT_RESETB_MASK BIT(23)
	#define USB_CTRL_USB_PM_SOFT_RESET_MASK BIT(30)
	#define USB_CTRL_USB_PM_USB_PWRDN_MASK BIT(31)
	#define USB_CTRL_USB_PM_STATUS 0x08
	#define USB_CTRL_USB_DEVICE_CTL1 0x10
	#define USB_CTRL_USB_DEVICE_CTL1_PORT_MODE_MASK GENMASK(1, 0)
	#define USB_CTRL_TEST_PORT_CTL 0x30
	#define USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_MASK GENMASK(7, 0)
	#define USB_CTRL_TEST_PORT_CTL_TPOUT_SEL_PME_GEN_MASK 0x0000002e
	#define USB_CTRL_TP_DIAG1 0x34
	#define USB_CTLR_TP_DIAG1_wake_MASK BIT(1)
	#define USB_CTRL_CTLR_CSHCR 0x50
	#define USB_CTRL_CTLR_CSHCR_ctl_pme_en_MASK BIT(18)
	#define USB_CTRL_P0_U2PHY_CFG1 0x68
	#define USB_CTRL_P0_U2PHY_CFG1_COMMONONN_MASK BIT(10)

	/* Register definitions for the USB_PHY block in 7211b0 */
	#define USB_PHY_PLL_CTL 0x00
	#define USB_PHY_PLL_CTL_PLL_SUSPEND_MASK BIT(27)
	#define USB_PHY_PLL_CTL_PLL_RESETB_MASK BIT(30)
	#define USB_PHY_PLL_LDO_CTL 0x08
	#define USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK BIT(0)
	#define USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK BIT(1)
	#define USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK BIT(2)
	#define USB_PHY_UTMI_CTL_1 0x04
	#define USB_PHY_UTMI_CTL_1_PHY_MODE_MASK GENMASK(3, 2)
	#define USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT 2
	#define USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK BIT(11)
	#define USB_PHY_IDDQ 0x1c
	#define USB_PHY_IDDQ_phy_iddq_MASK BIT(0)
	#define USB_PHY_STATUS 0x20
	#define USB_PHY_STATUS_pll_lock_MASK BIT(0)

	/* Register definitions for the MDIO registers in the DWC2 block of
	* the 7211b0.
	* NOTE: The PHY's MDIO registers are only accessible through the
	* legacy DesignWare USB controller even though it's not being used.
	*/
	#define USB_GMDIOCSR 0
	#define USB_GMDIOGEN 4

	/* Register definitions for the BDC EC block in 7211b0 */
	#define BDC_EC_AXIRDA 0x0c
	#define BDC_EC_AXIRDA_RTS_MASK GENMASK(31, 28)
	#define BDC_EC_AXIRDA_RTS_SHIFT 28

	#define USB_XHCI_GBL_GUSB2PHYCFG 0x100
	#define USB_XHCI_GBL_GUSB2PHYCFG_U2_FREECLK_EXISTS_MASK BIT(30)

	static void usb_mdio_write_7211b0(struct brcm_usb_init_params *params,
	uint8_t addr, uint16_t data)
	{
	void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO];

	addr &= 0x1f; /* 5-bit address */
	brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN);
	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
	;
	brcm_usb_writel(0x59020000 \| (addr << 18) \| data,
	usb_mdio + USB_GMDIOGEN);
	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
	;
	brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN);
	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
	;
	}

	static uint16_t __maybe_unused usb_mdio_read_7211b0(
	struct brcm_usb_init_params *params, uint8_t addr)
	{
	void __iomem *usb_mdio = params->regs[BRCM_REGS_USB_MDIO];

	addr &= 0x1f; /* 5-bit address */
	brcm_usb_writel(0xffffffff, usb_mdio + USB_GMDIOGEN);
	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
	;
	brcm_usb_writel(0x69020000 \| (addr << 18), usb_mdio + USB_GMDIOGEN);
	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
	;
	brcm_usb_writel(0x00000000, usb_mdio + USB_GMDIOGEN);
	while (brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & (1<<31))
	;
	return brcm_usb_readl(usb_mdio + USB_GMDIOCSR) & 0xffff;
	}

	static void usb2_eye_fix_7211b0(struct brcm_usb_init_params *params)
	{
	/* select bank */
	usb_mdio_write_7211b0(params, 0x1f, 0x80a0);

	/* Set the eye */
	usb_mdio_write_7211b0(params, 0x0a, 0xc6a0);
	}

	static void xhci_soft_reset(struct brcm_usb_init_params *params,
	int on_off)
	{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
	void __iomem *xhci_gbl = params->regs[BRCM_REGS_XHCI_GBL];

	/* Assert reset */
	if (on_off) {
	USB_CTRL_UNSET(ctrl, USB_PM, XHC_SOFT_RESETB);
	/* De-assert reset */
	} else {
	USB_CTRL_SET(ctrl, USB_PM, XHC_SOFT_RESETB);
	/* Required for COMMONONN to be set */
	if (params->supported_port_modes != USB_CTLR_MODE_DRD)
	USB_XHCI_GBL_UNSET(xhci_gbl, GUSB2PHYCFG,
	U2_FREECLK_EXISTS);
	}
	}

	static void usb_init_ipp(struct brcm_usb_init_params *params)
	{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
	u32 reg;
	u32 orig_reg;

	pr_debug("%s\n", __func__);

	orig_reg = reg = brcm_usb_readl(USB_CTRL_REG(ctrl, SETUP));
	if (params->ipp != 2)
	/* override ipp strap pin (if it exits) */
	reg &= ~(USB_CTRL_MASK(SETUP, STRAP_IPP_SEL));

	/* Override the default OC and PP polarity */
	reg &= ~(USB_CTRL_MASK(SETUP, IPP) \| USB_CTRL_MASK(SETUP, IOC));
	if (params->ioc)
	reg \|= USB_CTRL_MASK(SETUP, IOC);
	if (params->ipp == 1)
	reg \|= USB_CTRL_MASK(SETUP, IPP);
	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, SETUP));

	/*
	* If we're changing IPP, make sure power is off long enough
	* to turn off any connected devices.
	*/
	if ((reg ^ orig_reg) & USB_CTRL_MASK(SETUP, IPP))
	msleep(50);
	}

	static void syscon_piarbctl_init(struct regmap *rmap)
	{
	/* Switch from legacy USB OTG controller to new STB USB controller */
	regmap_update_bits(rmap, PIARBCTL_MISC, PIARBCTL_MISC_USB_ONLY_MASK,
	PIARBCTL_MISC_USB_SELECT_MASK \|
	PIARBCTL_MISC_USB_4G_SDRAM_MASK);
	}

	static void usb_init_common(struct brcm_usb_init_params *params)
	{
	u32 reg;
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

	pr_debug("%s\n", __func__);

	if (USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE)) {
	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
	reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
	reg \|= params->port_mode;
	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
	}
	switch (params->supported_port_modes) {
	case USB_CTLR_MODE_HOST:
	USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
	break;
	default:
	USB_CTRL_UNSET(ctrl, USB_PM, BDC_SOFT_RESETB);
	USB_CTRL_SET(ctrl, USB_PM, BDC_SOFT_RESETB);
	break;
	}
	}

	static void usb_wake_enable_7211b0(struct brcm_usb_init_params *params,
	bool enable)
	{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

	if (enable)
	USB_CTRL_SET(ctrl, CTLR_CSHCR, ctl_pme_en);
	else
	USB_CTRL_UNSET(ctrl, CTLR_CSHCR, ctl_pme_en);
	}

	static void usb_wake_enable_7216(struct brcm_usb_init_params *params,
	bool enable)
	{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

	if (enable)
	USB_CTRL_SET(ctrl, USB_PM, XHC_PME_EN);
	else
	USB_CTRL_UNSET(ctrl, USB_PM, XHC_PME_EN);
	}

	static void usb_init_common_7211b0(struct brcm_usb_init_params *params)
	{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
	void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY];
	void __iomem *bdc_ec = params->regs[BRCM_REGS_BDC_EC];
	int timeout_ms = PHY_LOCK_TIMEOUT_MS;
	u32 reg;

	if (params->syscon_piarbctl)
	syscon_piarbctl_init(params->syscon_piarbctl);

	USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);

	usb_wake_enable_7211b0(params, false);
	if (!params->wake_enabled) {

	/* undo possible suspend settings */
	brcm_usb_writel(0, usb_phy + USB_PHY_IDDQ);
	reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
	reg \|= USB_PHY_PLL_CTL_PLL_RESETB_MASK;
	brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);

	/* temporarily enable FSM so PHY comes up properly */
	reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
	reg \|= USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK;
	brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);
	}

	/* Disable PLL auto suspend */
	reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
	reg \|= USB_PHY_PLL_CTL_PLL_SUSPEND_MASK;
	brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);

	/* Init the PHY */
	reg = USB_PHY_PLL_LDO_CTL_AFE_CORERDY_MASK \|
	USB_PHY_PLL_LDO_CTL_AFE_LDO_PWRDWNB_MASK \|
	USB_PHY_PLL_LDO_CTL_AFE_BG_PWRDWNB_MASK;
	brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_LDO_CTL);

	/* wait for lock */
	while (timeout_ms-- > 0) {
	reg = brcm_usb_readl(usb_phy + USB_PHY_STATUS);
	if (reg & USB_PHY_STATUS_pll_lock_MASK)
	break;
	usleep_range(1000, 2000);
	}

	/* Set the PHY_MODE */
	reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
	reg &= ~USB_PHY_UTMI_CTL_1_PHY_MODE_MASK;
	reg \|= params->supported_port_modes << USB_PHY_UTMI_CTL_1_PHY_MODE_SHIFT;
	brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);

	usb_init_common(params);

	/*
	* The BDC controller will get occasional failures with
	* the default "Read Transaction Size" of 6 (1024 bytes).
	* Set it to 4 (256 bytes).
	*/
	if ((params->supported_port_modes != USB_CTLR_MODE_HOST) && bdc_ec) {
	reg = brcm_usb_readl(bdc_ec + BDC_EC_AXIRDA);
	reg &= ~BDC_EC_AXIRDA_RTS_MASK;
	reg \|= (0x4 << BDC_EC_AXIRDA_RTS_SHIFT);
	brcm_usb_writel(reg, bdc_ec + BDC_EC_AXIRDA);
	}

	/*
	* Disable FSM, otherwise the PHY will auto suspend when no
	* device is connected and will be reset on resume.
	*/
	reg = brcm_usb_readl(usb_phy + USB_PHY_UTMI_CTL_1);
	reg &= ~USB_PHY_UTMI_CTL_1_POWER_UP_FSM_EN_MASK;
	brcm_usb_writel(reg, usb_phy + USB_PHY_UTMI_CTL_1);

	usb2_eye_fix_7211b0(params);
	}

	static void usb_init_common_7216(struct brcm_usb_init_params *params)
	{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

	USB_CTRL_UNSET(ctrl, USB_PM, XHC_S2_CLK_SWITCH_EN);
	USB_CTRL_UNSET(ctrl, USB_PM, USB_PWRDN);

	/* 1 millisecond - for USB clocks to settle down */
	usleep_range(1000, 2000);

	/*
	* Disable PHY when port is suspended
	* Does not work in DRD mode
	*/
	if (params->supported_port_modes != USB_CTLR_MODE_DRD)
	USB_CTRL_SET(ctrl, P0_U2PHY_CFG1, COMMONONN);

	usb_wake_enable_7216(params, false);
	usb_init_common(params);
	}

	static void usb_init_xhci(struct brcm_usb_init_params *params)
	{
	pr_debug("%s\n", __func__);

	xhci_soft_reset(params, 0);
	}

	static void usb_uninit_common_7216(struct brcm_usb_init_params *params)
	{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];

	pr_debug("%s\n", __func__);

	if (params->wake_enabled) {
	/* Switch to using slower clock during suspend to save power */
	USB_CTRL_SET(ctrl, USB_PM, XHC_S2_CLK_SWITCH_EN);
	usb_wake_enable_7216(params, true);
	} else {
	USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
	}
	}

	static void usb_uninit_common_7211b0(struct brcm_usb_init_params *params)
	{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
	void __iomem *usb_phy = params->regs[BRCM_REGS_USB_PHY];
	u32 reg;

	pr_debug("%s\n", __func__);

	if (params->wake_enabled) {
	USB_CTRL_SET(ctrl, TEST_PORT_CTL, TPOUT_SEL_PME_GEN);
	usb_wake_enable_7211b0(params, true);
	} else {
	USB_CTRL_SET(ctrl, USB_PM, USB_PWRDN);
	brcm_usb_writel(0, usb_phy + USB_PHY_PLL_LDO_CTL);
	reg = brcm_usb_readl(usb_phy + USB_PHY_PLL_CTL);
	reg &= ~USB_PHY_PLL_CTL_PLL_RESETB_MASK;
	brcm_usb_writel(reg, usb_phy + USB_PHY_PLL_CTL);
	brcm_usb_writel(USB_PHY_IDDQ_phy_iddq_MASK,
	usb_phy + USB_PHY_IDDQ);
	}

	}

	static void usb_uninit_xhci(struct brcm_usb_init_params *params)
	{

	pr_debug("%s\n", __func__);

	if (!params->wake_enabled)
	xhci_soft_reset(params, 1);
	}

	static int usb_get_dual_select(struct brcm_usb_init_params *params)
	{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
	u32 reg = 0;

	pr_debug("%s\n", __func__);

	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
	reg &= USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
	return reg;
	}

	static void usb_set_dual_select(struct brcm_usb_init_params *params)
	{
	void __iomem *ctrl = params->regs[BRCM_REGS_CTRL];
	u32 reg;

	pr_debug("%s\n", __func__);

	reg = brcm_usb_readl(USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
	reg &= ~USB_CTRL_MASK(USB_DEVICE_CTL1, PORT_MODE);
	reg \|= params->port_mode;
	brcm_usb_writel(reg, USB_CTRL_REG(ctrl, USB_DEVICE_CTL1));
	}

	static const struct brcm_usb_init_ops bcm7216_ops = {
	.init_ipp = usb_init_ipp,
	.init_common = usb_init_common_7216,
	.init_xhci = usb_init_xhci,
	.uninit_common = usb_uninit_common_7216,
	.uninit_xhci = usb_uninit_xhci,
	.get_dual_select = usb_get_dual_select,
	.set_dual_select = usb_set_dual_select,
	};

	static const struct brcm_usb_init_ops bcm7211b0_ops = {
	.init_ipp = usb_init_ipp,
	.init_common = usb_init_common_7211b0,
	.init_xhci = usb_init_xhci,
	.uninit_common = usb_uninit_common_7211b0,
	.uninit_xhci = usb_uninit_xhci,
	.get_dual_select = usb_get_dual_select,
	.set_dual_select = usb_set_dual_select,
	};

	void brcm_usb_dvr_init_7216(struct brcm_usb_init_params *params)
	{

	pr_debug("%s\n", __func__);

	params->family_name = "7216";
	params->ops = &bcm7216_ops;
	}

	void brcm_usb_dvr_init_7211b0(struct brcm_usb_init_params *params)
	{

	pr_debug("%s\n", __func__);

	params->family_name = "7211";
	params->ops = &bcm7211b0_ops;
	}