| // SPDX-License-Identifier: GPL-2.0+ |
| /* Siemens ID Mouse driver v0.6 |
| |
| Copyright (C) 2004-5 by Florian 'Floe' Echtler <echtler@fs.tum.de> |
| and Andreas 'ad' Deresch <aderesch@fs.tum.de> |
| |
| Derived from the USB Skeleton driver 1.1, |
| Copyright (C) 2003 Greg Kroah-Hartman (greg@kroah.com) |
| |
| Additional information provided by Martin Reising |
| <Martin.Reising@natural-computing.de> |
| |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/sched/signal.h> |
| #include <linux/errno.h> |
| #include <linux/delay.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/completion.h> |
| #include <linux/mutex.h> |
| #include <linux/uaccess.h> |
| #include <linux/usb.h> |
| |
| /* image constants */ |
| #define WIDTH 225 |
| #define HEIGHT 289 |
| #define HEADER "P5 225 289 255 " |
| #define IMGSIZE ((WIDTH * HEIGHT) + sizeof(HEADER)-1) |
| |
| #define DRIVER_SHORT "idmouse" |
| #define DRIVER_AUTHOR "Florian 'Floe' Echtler <echtler@fs.tum.de>" |
| #define DRIVER_DESC "Siemens ID Mouse FingerTIP Sensor Driver" |
| |
| /* minor number for misc USB devices */ |
| #define USB_IDMOUSE_MINOR_BASE 132 |
| |
| /* vendor and device IDs */ |
| #define ID_SIEMENS 0x0681 |
| #define ID_IDMOUSE 0x0005 |
| #define ID_CHERRY 0x0010 |
| |
| /* device ID table */ |
| static const struct usb_device_id idmouse_table[] = { |
| {USB_DEVICE(ID_SIEMENS, ID_IDMOUSE)}, /* Siemens ID Mouse (Professional) */ |
| {USB_DEVICE(ID_SIEMENS, ID_CHERRY )}, /* Cherry FingerTIP ID Board */ |
| {} /* terminating null entry */ |
| }; |
| |
| /* sensor commands */ |
| #define FTIP_RESET 0x20 |
| #define FTIP_ACQUIRE 0x21 |
| #define FTIP_RELEASE 0x22 |
| #define FTIP_BLINK 0x23 /* LSB of value = blink pulse width */ |
| #define FTIP_SCROLL 0x24 |
| |
| #define ftip_command(dev, command, value, index) \ |
| usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), command, \ |
| USB_TYPE_VENDOR | USB_RECIP_ENDPOINT | USB_DIR_OUT, value, index, NULL, 0, 1000) |
| |
| MODULE_DEVICE_TABLE(usb, idmouse_table); |
| |
| /* structure to hold all of our device specific stuff */ |
| struct usb_idmouse { |
| |
| struct usb_device *udev; /* save off the usb device pointer */ |
| struct usb_interface *interface; /* the interface for this device */ |
| |
| unsigned char *bulk_in_buffer; /* the buffer to receive data */ |
| size_t bulk_in_size; /* the maximum bulk packet size */ |
| size_t orig_bi_size; /* same as above, but reported by the device */ |
| __u8 bulk_in_endpointAddr; /* the address of the bulk in endpoint */ |
| |
| int open; /* if the port is open or not */ |
| int present; /* if the device is not disconnected */ |
| struct mutex lock; /* locks this structure */ |
| |
| }; |
| |
| /* local function prototypes */ |
| static ssize_t idmouse_read(struct file *file, char __user *buffer, |
| size_t count, loff_t * ppos); |
| |
| static int idmouse_open(struct inode *inode, struct file *file); |
| static int idmouse_release(struct inode *inode, struct file *file); |
| |
| static int idmouse_probe(struct usb_interface *interface, |
| const struct usb_device_id *id); |
| |
| static void idmouse_disconnect(struct usb_interface *interface); |
| static int idmouse_suspend(struct usb_interface *intf, pm_message_t message); |
| static int idmouse_resume(struct usb_interface *intf); |
| |
| /* file operation pointers */ |
| static const struct file_operations idmouse_fops = { |
| .owner = THIS_MODULE, |
| .read = idmouse_read, |
| .open = idmouse_open, |
| .release = idmouse_release, |
| .llseek = default_llseek, |
| }; |
| |
| /* class driver information */ |
| static struct usb_class_driver idmouse_class = { |
| .name = "idmouse%d", |
| .fops = &idmouse_fops, |
| .minor_base = USB_IDMOUSE_MINOR_BASE, |
| }; |
| |
| /* usb specific object needed to register this driver with the usb subsystem */ |
| static struct usb_driver idmouse_driver = { |
| .name = DRIVER_SHORT, |
| .probe = idmouse_probe, |
| .disconnect = idmouse_disconnect, |
| .suspend = idmouse_suspend, |
| .resume = idmouse_resume, |
| .reset_resume = idmouse_resume, |
| .id_table = idmouse_table, |
| .supports_autosuspend = 1, |
| }; |
| |
| static int idmouse_create_image(struct usb_idmouse *dev) |
| { |
| int bytes_read; |
| int bulk_read; |
| int result; |
| |
| memcpy(dev->bulk_in_buffer, HEADER, sizeof(HEADER)-1); |
| bytes_read = sizeof(HEADER)-1; |
| |
| /* reset the device and set a fast blink rate */ |
| result = ftip_command(dev, FTIP_RELEASE, 0, 0); |
| if (result < 0) |
| goto reset; |
| result = ftip_command(dev, FTIP_BLINK, 1, 0); |
| if (result < 0) |
| goto reset; |
| |
| /* initialize the sensor - sending this command twice */ |
| /* significantly reduces the rate of failed reads */ |
| result = ftip_command(dev, FTIP_ACQUIRE, 0, 0); |
| if (result < 0) |
| goto reset; |
| result = ftip_command(dev, FTIP_ACQUIRE, 0, 0); |
| if (result < 0) |
| goto reset; |
| |
| /* start the readout - sending this command twice */ |
| /* presumably enables the high dynamic range mode */ |
| result = ftip_command(dev, FTIP_RESET, 0, 0); |
| if (result < 0) |
| goto reset; |
| result = ftip_command(dev, FTIP_RESET, 0, 0); |
| if (result < 0) |
| goto reset; |
| |
| /* loop over a blocking bulk read to get data from the device */ |
| while (bytes_read < IMGSIZE) { |
| result = usb_bulk_msg(dev->udev, |
| usb_rcvbulkpipe(dev->udev, dev->bulk_in_endpointAddr), |
| dev->bulk_in_buffer + bytes_read, |
| dev->bulk_in_size, &bulk_read, 5000); |
| if (result < 0) { |
| /* Maybe this error was caused by the increased packet size? */ |
| /* Reset to the original value and tell userspace to retry. */ |
| if (dev->bulk_in_size != dev->orig_bi_size) { |
| dev->bulk_in_size = dev->orig_bi_size; |
| result = -EAGAIN; |
| } |
| break; |
| } |
| if (signal_pending(current)) { |
| result = -EINTR; |
| break; |
| } |
| bytes_read += bulk_read; |
| } |
| |
| /* check for valid image */ |
| /* right border should be black (0x00) */ |
| for (bytes_read = sizeof(HEADER)-1 + WIDTH-1; bytes_read < IMGSIZE; bytes_read += WIDTH) |
| if (dev->bulk_in_buffer[bytes_read] != 0x00) |
| return -EAGAIN; |
| |
| /* lower border should be white (0xFF) */ |
| for (bytes_read = IMGSIZE-WIDTH; bytes_read < IMGSIZE-1; bytes_read++) |
| if (dev->bulk_in_buffer[bytes_read] != 0xFF) |
| return -EAGAIN; |
| |
| /* reset the device */ |
| reset: |
| ftip_command(dev, FTIP_RELEASE, 0, 0); |
| |
| /* should be IMGSIZE == 65040 */ |
| dev_dbg(&dev->interface->dev, "read %d bytes fingerprint data\n", |
| bytes_read); |
| return result; |
| } |
| |
| /* PM operations are nops as this driver does IO only during open() */ |
| static int idmouse_suspend(struct usb_interface *intf, pm_message_t message) |
| { |
| return 0; |
| } |
| |
| static int idmouse_resume(struct usb_interface *intf) |
| { |
| return 0; |
| } |
| |
| static inline void idmouse_delete(struct usb_idmouse *dev) |
| { |
| kfree(dev->bulk_in_buffer); |
| kfree(dev); |
| } |
| |
| static int idmouse_open(struct inode *inode, struct file *file) |
| { |
| struct usb_idmouse *dev; |
| struct usb_interface *interface; |
| int result; |
| |
| /* get the interface from minor number and driver information */ |
| interface = usb_find_interface(&idmouse_driver, iminor(inode)); |
| if (!interface) |
| return -ENODEV; |
| |
| /* get the device information block from the interface */ |
| dev = usb_get_intfdata(interface); |
| if (!dev) |
| return -ENODEV; |
| |
| /* lock this device */ |
| mutex_lock(&dev->lock); |
| |
| /* check if already open */ |
| if (dev->open) { |
| |
| /* already open, so fail */ |
| result = -EBUSY; |
| |
| } else { |
| |
| /* create a new image and check for success */ |
| result = usb_autopm_get_interface(interface); |
| if (result) |
| goto error; |
| result = idmouse_create_image(dev); |
| usb_autopm_put_interface(interface); |
| if (result) |
| goto error; |
| |
| /* increment our usage count for the driver */ |
| ++dev->open; |
| |
| /* save our object in the file's private structure */ |
| file->private_data = dev; |
| |
| } |
| |
| error: |
| |
| /* unlock this device */ |
| mutex_unlock(&dev->lock); |
| return result; |
| } |
| |
| static int idmouse_release(struct inode *inode, struct file *file) |
| { |
| struct usb_idmouse *dev; |
| |
| dev = file->private_data; |
| |
| if (dev == NULL) |
| return -ENODEV; |
| |
| /* lock our device */ |
| mutex_lock(&dev->lock); |
| |
| --dev->open; |
| |
| if (!dev->present) { |
| /* the device was unplugged before the file was released */ |
| mutex_unlock(&dev->lock); |
| idmouse_delete(dev); |
| } else { |
| mutex_unlock(&dev->lock); |
| } |
| return 0; |
| } |
| |
| static ssize_t idmouse_read(struct file *file, char __user *buffer, size_t count, |
| loff_t * ppos) |
| { |
| struct usb_idmouse *dev = file->private_data; |
| int result; |
| |
| /* lock this object */ |
| mutex_lock(&dev->lock); |
| |
| /* verify that the device wasn't unplugged */ |
| if (!dev->present) { |
| mutex_unlock(&dev->lock); |
| return -ENODEV; |
| } |
| |
| result = simple_read_from_buffer(buffer, count, ppos, |
| dev->bulk_in_buffer, IMGSIZE); |
| /* unlock the device */ |
| mutex_unlock(&dev->lock); |
| return result; |
| } |
| |
| static int idmouse_probe(struct usb_interface *interface, |
| const struct usb_device_id *id) |
| { |
| struct usb_device *udev = interface_to_usbdev(interface); |
| struct usb_idmouse *dev; |
| struct usb_host_interface *iface_desc; |
| struct usb_endpoint_descriptor *endpoint; |
| int result; |
| |
| /* check if we have gotten the data or the hid interface */ |
| iface_desc = interface->cur_altsetting; |
| if (iface_desc->desc.bInterfaceClass != 0x0A) |
| return -ENODEV; |
| |
| if (iface_desc->desc.bNumEndpoints < 1) |
| return -ENODEV; |
| |
| /* allocate memory for our device state and initialize it */ |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (dev == NULL) |
| return -ENOMEM; |
| |
| mutex_init(&dev->lock); |
| dev->udev = udev; |
| dev->interface = interface; |
| |
| /* set up the endpoint information - use only the first bulk-in endpoint */ |
| result = usb_find_bulk_in_endpoint(iface_desc, &endpoint); |
| if (result) { |
| dev_err(&interface->dev, "Unable to find bulk-in endpoint.\n"); |
| idmouse_delete(dev); |
| return result; |
| } |
| |
| dev->orig_bi_size = usb_endpoint_maxp(endpoint); |
| dev->bulk_in_size = 0x200; /* works _much_ faster */ |
| dev->bulk_in_endpointAddr = endpoint->bEndpointAddress; |
| dev->bulk_in_buffer = kmalloc(IMGSIZE + dev->bulk_in_size, GFP_KERNEL); |
| if (!dev->bulk_in_buffer) { |
| idmouse_delete(dev); |
| return -ENOMEM; |
| } |
| |
| /* allow device read, write and ioctl */ |
| dev->present = 1; |
| |
| /* we can register the device now, as it is ready */ |
| usb_set_intfdata(interface, dev); |
| result = usb_register_dev(interface, &idmouse_class); |
| if (result) { |
| /* something prevented us from registering this device */ |
| dev_err(&interface->dev, "Unable to allocate minor number.\n"); |
| idmouse_delete(dev); |
| return result; |
| } |
| |
| /* be noisy */ |
| dev_info(&interface->dev,"%s now attached\n",DRIVER_DESC); |
| |
| return 0; |
| } |
| |
| static void idmouse_disconnect(struct usb_interface *interface) |
| { |
| struct usb_idmouse *dev = usb_get_intfdata(interface); |
| |
| /* give back our minor */ |
| usb_deregister_dev(interface, &idmouse_class); |
| |
| /* lock the device */ |
| mutex_lock(&dev->lock); |
| |
| /* prevent device read, write and ioctl */ |
| dev->present = 0; |
| |
| /* if the device is opened, idmouse_release will clean this up */ |
| if (!dev->open) { |
| mutex_unlock(&dev->lock); |
| idmouse_delete(dev); |
| } else { |
| /* unlock */ |
| mutex_unlock(&dev->lock); |
| } |
| |
| dev_info(&interface->dev, "disconnected\n"); |
| } |
| |
| module_usb_driver(idmouse_driver); |
| |
| MODULE_AUTHOR(DRIVER_AUTHOR); |
| MODULE_DESCRIPTION(DRIVER_DESC); |
| MODULE_LICENSE("GPL"); |
| |