| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2019 Oracle. All Rights Reserved. |
| * Author: Darrick J. Wong <darrick.wong@oracle.com> |
| */ |
| #include "xfs.h" |
| #include "xfs_fs.h" |
| #include "xfs_shared.h" |
| #include "xfs_format.h" |
| #include "xfs_log_format.h" |
| #include "xfs_trans_resv.h" |
| #include "xfs_mount.h" |
| #include "xfs_inode.h" |
| #include "xfs_btree.h" |
| #include "xfs_ialloc.h" |
| #include "xfs_ialloc_btree.h" |
| #include "xfs_iwalk.h" |
| #include "xfs_error.h" |
| #include "xfs_trace.h" |
| #include "xfs_icache.h" |
| #include "xfs_health.h" |
| #include "xfs_trans.h" |
| #include "xfs_pwork.h" |
| #include "xfs_ag.h" |
| #include "xfs_bit.h" |
| |
| /* |
| * Walking Inodes in the Filesystem |
| * ================================ |
| * |
| * This iterator function walks a subset of filesystem inodes in increasing |
| * order from @startino until there are no more inodes. For each allocated |
| * inode it finds, it calls a walk function with the relevant inode number and |
| * a pointer to caller-provided data. The walk function can return the usual |
| * negative error code to stop the iteration; 0 to continue the iteration; or |
| * -ECANCELED to stop the iteration. This return value is returned to the |
| * caller. |
| * |
| * Internally, we allow the walk function to do anything, which means that we |
| * cannot maintain the inobt cursor or our lock on the AGI buffer. We |
| * therefore cache the inobt records in kernel memory and only call the walk |
| * function when our memory buffer is full. @nr_recs is the number of records |
| * that we've cached, and @sz_recs is the size of our cache. |
| * |
| * It is the responsibility of the walk function to ensure it accesses |
| * allocated inodes, as the inobt records may be stale by the time they are |
| * acted upon. |
| */ |
| |
| struct xfs_iwalk_ag { |
| /* parallel work control data; will be null if single threaded */ |
| struct xfs_pwork pwork; |
| |
| struct xfs_mount *mp; |
| struct xfs_trans *tp; |
| struct xfs_perag *pag; |
| |
| /* Where do we start the traversal? */ |
| xfs_ino_t startino; |
| |
| /* What was the last inode number we saw when iterating the inobt? */ |
| xfs_ino_t lastino; |
| |
| /* Array of inobt records we cache. */ |
| struct xfs_inobt_rec_incore *recs; |
| |
| /* Number of entries allocated for the @recs array. */ |
| unsigned int sz_recs; |
| |
| /* Number of entries in the @recs array that are in use. */ |
| unsigned int nr_recs; |
| |
| /* Inode walk function and data pointer. */ |
| xfs_iwalk_fn iwalk_fn; |
| xfs_inobt_walk_fn inobt_walk_fn; |
| void *data; |
| |
| /* |
| * Make it look like the inodes up to startino are free so that |
| * bulkstat can start its inode iteration at the correct place without |
| * needing to special case everywhere. |
| */ |
| unsigned int trim_start:1; |
| |
| /* Skip empty inobt records? */ |
| unsigned int skip_empty:1; |
| |
| /* Drop the (hopefully empty) transaction when calling iwalk_fn. */ |
| unsigned int drop_trans:1; |
| }; |
| |
| /* |
| * Loop over all clusters in a chunk for a given incore inode allocation btree |
| * record. Do a readahead if there are any allocated inodes in that cluster. |
| */ |
| STATIC void |
| xfs_iwalk_ichunk_ra( |
| struct xfs_mount *mp, |
| struct xfs_perag *pag, |
| struct xfs_inobt_rec_incore *irec) |
| { |
| struct xfs_ino_geometry *igeo = M_IGEO(mp); |
| xfs_agnumber_t agno = pag->pag_agno; |
| xfs_agblock_t agbno; |
| struct blk_plug plug; |
| int i; /* inode chunk index */ |
| |
| agbno = XFS_AGINO_TO_AGBNO(mp, irec->ir_startino); |
| |
| blk_start_plug(&plug); |
| for (i = 0; i < XFS_INODES_PER_CHUNK; i += igeo->inodes_per_cluster) { |
| xfs_inofree_t imask; |
| |
| imask = xfs_inobt_maskn(i, igeo->inodes_per_cluster); |
| if (imask & ~irec->ir_free) { |
| xfs_buf_readahead(mp->m_ddev_targp, |
| XFS_AGB_TO_DADDR(mp, agno, agbno), |
| igeo->blocks_per_cluster * mp->m_bsize, |
| &xfs_inode_buf_ops); |
| } |
| agbno += igeo->blocks_per_cluster; |
| } |
| blk_finish_plug(&plug); |
| } |
| |
| /* |
| * Set the bits in @irec's free mask that correspond to the inodes before |
| * @agino so that we skip them. This is how we restart an inode walk that was |
| * interrupted in the middle of an inode record. |
| */ |
| STATIC void |
| xfs_iwalk_adjust_start( |
| xfs_agino_t agino, /* starting inode of chunk */ |
| struct xfs_inobt_rec_incore *irec) /* btree record */ |
| { |
| int idx; /* index into inode chunk */ |
| |
| idx = agino - irec->ir_startino; |
| |
| irec->ir_free |= xfs_inobt_maskn(0, idx); |
| irec->ir_freecount = hweight64(irec->ir_free); |
| } |
| |
| /* Allocate memory for a walk. */ |
| STATIC int |
| xfs_iwalk_alloc( |
| struct xfs_iwalk_ag *iwag) |
| { |
| size_t size; |
| |
| ASSERT(iwag->recs == NULL); |
| iwag->nr_recs = 0; |
| |
| /* Allocate a prefetch buffer for inobt records. */ |
| size = iwag->sz_recs * sizeof(struct xfs_inobt_rec_incore); |
| iwag->recs = kmalloc(size, GFP_KERNEL | __GFP_RETRY_MAYFAIL); |
| if (iwag->recs == NULL) |
| return -ENOMEM; |
| |
| return 0; |
| } |
| |
| /* Free memory we allocated for a walk. */ |
| STATIC void |
| xfs_iwalk_free( |
| struct xfs_iwalk_ag *iwag) |
| { |
| kfree(iwag->recs); |
| iwag->recs = NULL; |
| } |
| |
| /* For each inuse inode in each cached inobt record, call our function. */ |
| STATIC int |
| xfs_iwalk_ag_recs( |
| struct xfs_iwalk_ag *iwag) |
| { |
| struct xfs_mount *mp = iwag->mp; |
| struct xfs_trans *tp = iwag->tp; |
| struct xfs_perag *pag = iwag->pag; |
| xfs_ino_t ino; |
| unsigned int i, j; |
| int error; |
| |
| for (i = 0; i < iwag->nr_recs; i++) { |
| struct xfs_inobt_rec_incore *irec = &iwag->recs[i]; |
| |
| trace_xfs_iwalk_ag_rec(mp, pag->pag_agno, irec); |
| |
| if (xfs_pwork_want_abort(&iwag->pwork)) |
| return 0; |
| |
| if (iwag->inobt_walk_fn) { |
| error = iwag->inobt_walk_fn(mp, tp, pag->pag_agno, irec, |
| iwag->data); |
| if (error) |
| return error; |
| } |
| |
| if (!iwag->iwalk_fn) |
| continue; |
| |
| for (j = 0; j < XFS_INODES_PER_CHUNK; j++) { |
| if (xfs_pwork_want_abort(&iwag->pwork)) |
| return 0; |
| |
| /* Skip if this inode is free */ |
| if (XFS_INOBT_MASK(j) & irec->ir_free) |
| continue; |
| |
| /* Otherwise call our function. */ |
| ino = XFS_AGINO_TO_INO(mp, pag->pag_agno, |
| irec->ir_startino + j); |
| error = iwag->iwalk_fn(mp, tp, ino, iwag->data); |
| if (error) |
| return error; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* Delete cursor and let go of AGI. */ |
| static inline void |
| xfs_iwalk_del_inobt( |
| struct xfs_trans *tp, |
| struct xfs_btree_cur **curpp, |
| struct xfs_buf **agi_bpp, |
| int error) |
| { |
| if (*curpp) { |
| xfs_btree_del_cursor(*curpp, error); |
| *curpp = NULL; |
| } |
| if (*agi_bpp) { |
| xfs_trans_brelse(tp, *agi_bpp); |
| *agi_bpp = NULL; |
| } |
| } |
| |
| /* |
| * Set ourselves up for walking inobt records starting from a given point in |
| * the filesystem. |
| * |
| * If caller passed in a nonzero start inode number, load the record from the |
| * inobt and make the record look like all the inodes before agino are free so |
| * that we skip them, and then move the cursor to the next inobt record. This |
| * is how we support starting an iwalk in the middle of an inode chunk. |
| * |
| * If the caller passed in a start number of zero, move the cursor to the first |
| * inobt record. |
| * |
| * The caller is responsible for cleaning up the cursor and buffer pointer |
| * regardless of the error status. |
| */ |
| STATIC int |
| xfs_iwalk_ag_start( |
| struct xfs_iwalk_ag *iwag, |
| xfs_agino_t agino, |
| struct xfs_btree_cur **curpp, |
| struct xfs_buf **agi_bpp, |
| int *has_more) |
| { |
| struct xfs_mount *mp = iwag->mp; |
| struct xfs_trans *tp = iwag->tp; |
| struct xfs_perag *pag = iwag->pag; |
| struct xfs_inobt_rec_incore *irec; |
| int error; |
| |
| /* Set up a fresh cursor and empty the inobt cache. */ |
| iwag->nr_recs = 0; |
| error = xfs_ialloc_read_agi(pag, tp, 0, agi_bpp); |
| if (error) |
| return error; |
| *curpp = xfs_inobt_init_cursor(pag, tp, *agi_bpp); |
| |
| /* Starting at the beginning of the AG? That's easy! */ |
| if (agino == 0) |
| return xfs_inobt_lookup(*curpp, 0, XFS_LOOKUP_GE, has_more); |
| |
| /* |
| * Otherwise, we have to grab the inobt record where we left off, stuff |
| * the record into our cache, and then see if there are more records. |
| * We require a lookup cache of at least two elements so that the |
| * caller doesn't have to deal with tearing down the cursor to walk the |
| * records. |
| */ |
| error = xfs_inobt_lookup(*curpp, agino, XFS_LOOKUP_LE, has_more); |
| if (error) |
| return error; |
| |
| /* |
| * If the LE lookup at @agino yields no records, jump ahead to the |
| * inobt cursor increment to see if there are more records to process. |
| */ |
| if (!*has_more) |
| goto out_advance; |
| |
| /* Get the record, should always work */ |
| irec = &iwag->recs[iwag->nr_recs]; |
| error = xfs_inobt_get_rec(*curpp, irec, has_more); |
| if (error) |
| return error; |
| if (XFS_IS_CORRUPT(mp, *has_more != 1)) { |
| xfs_btree_mark_sick(*curpp); |
| return -EFSCORRUPTED; |
| } |
| |
| iwag->lastino = XFS_AGINO_TO_INO(mp, pag->pag_agno, |
| irec->ir_startino + XFS_INODES_PER_CHUNK - 1); |
| |
| /* |
| * If the LE lookup yielded an inobt record before the cursor position, |
| * skip it and see if there's another one after it. |
| */ |
| if (irec->ir_startino + XFS_INODES_PER_CHUNK <= agino) |
| goto out_advance; |
| |
| /* |
| * If agino fell in the middle of the inode record, make it look like |
| * the inodes up to agino are free so that we don't return them again. |
| */ |
| if (iwag->trim_start) |
| xfs_iwalk_adjust_start(agino, irec); |
| |
| /* |
| * The prefetch calculation is supposed to give us a large enough inobt |
| * record cache that grab_ichunk can stage a partial first record and |
| * the loop body can cache a record without having to check for cache |
| * space until after it reads an inobt record. |
| */ |
| iwag->nr_recs++; |
| ASSERT(iwag->nr_recs < iwag->sz_recs); |
| |
| out_advance: |
| return xfs_btree_increment(*curpp, 0, has_more); |
| } |
| |
| /* |
| * The inobt record cache is full, so preserve the inobt cursor state and |
| * run callbacks on the cached inobt records. When we're done, restore the |
| * cursor state to wherever the cursor would have been had the cache not been |
| * full (and therefore we could've just incremented the cursor) if *@has_more |
| * is true. On exit, *@has_more will indicate whether or not the caller should |
| * try for more inode records. |
| */ |
| STATIC int |
| xfs_iwalk_run_callbacks( |
| struct xfs_iwalk_ag *iwag, |
| struct xfs_btree_cur **curpp, |
| struct xfs_buf **agi_bpp, |
| int *has_more) |
| { |
| struct xfs_mount *mp = iwag->mp; |
| xfs_agino_t next_agino; |
| int error; |
| |
| next_agino = XFS_INO_TO_AGINO(mp, iwag->lastino) + 1; |
| |
| ASSERT(iwag->nr_recs > 0); |
| |
| /* Delete cursor but remember the last record we cached... */ |
| xfs_iwalk_del_inobt(iwag->tp, curpp, agi_bpp, 0); |
| ASSERT(next_agino >= iwag->recs[iwag->nr_recs - 1].ir_startino + |
| XFS_INODES_PER_CHUNK); |
| |
| if (iwag->drop_trans) { |
| xfs_trans_cancel(iwag->tp); |
| iwag->tp = NULL; |
| } |
| |
| error = xfs_iwalk_ag_recs(iwag); |
| if (error) |
| return error; |
| |
| /* ...empty the cache... */ |
| iwag->nr_recs = 0; |
| |
| if (!has_more) |
| return 0; |
| |
| if (iwag->drop_trans) { |
| error = xfs_trans_alloc_empty(mp, &iwag->tp); |
| if (error) |
| return error; |
| } |
| |
| /* ...and recreate the cursor just past where we left off. */ |
| error = xfs_ialloc_read_agi(iwag->pag, iwag->tp, 0, agi_bpp); |
| if (error) |
| return error; |
| *curpp = xfs_inobt_init_cursor(iwag->pag, iwag->tp, *agi_bpp); |
| return xfs_inobt_lookup(*curpp, next_agino, XFS_LOOKUP_GE, has_more); |
| } |
| |
| /* Walk all inodes in a single AG, from @iwag->startino to the end of the AG. */ |
| STATIC int |
| xfs_iwalk_ag( |
| struct xfs_iwalk_ag *iwag) |
| { |
| struct xfs_mount *mp = iwag->mp; |
| struct xfs_perag *pag = iwag->pag; |
| struct xfs_buf *agi_bp = NULL; |
| struct xfs_btree_cur *cur = NULL; |
| xfs_agino_t agino; |
| int has_more; |
| int error = 0; |
| |
| /* Set up our cursor at the right place in the inode btree. */ |
| ASSERT(pag->pag_agno == XFS_INO_TO_AGNO(mp, iwag->startino)); |
| agino = XFS_INO_TO_AGINO(mp, iwag->startino); |
| error = xfs_iwalk_ag_start(iwag, agino, &cur, &agi_bp, &has_more); |
| |
| while (!error && has_more) { |
| struct xfs_inobt_rec_incore *irec; |
| xfs_ino_t rec_fsino; |
| |
| cond_resched(); |
| if (xfs_pwork_want_abort(&iwag->pwork)) |
| goto out; |
| |
| /* Fetch the inobt record. */ |
| irec = &iwag->recs[iwag->nr_recs]; |
| error = xfs_inobt_get_rec(cur, irec, &has_more); |
| if (error || !has_more) |
| break; |
| |
| /* Make sure that we always move forward. */ |
| rec_fsino = XFS_AGINO_TO_INO(mp, pag->pag_agno, irec->ir_startino); |
| if (iwag->lastino != NULLFSINO && |
| XFS_IS_CORRUPT(mp, iwag->lastino >= rec_fsino)) { |
| xfs_btree_mark_sick(cur); |
| error = -EFSCORRUPTED; |
| goto out; |
| } |
| iwag->lastino = rec_fsino + XFS_INODES_PER_CHUNK - 1; |
| |
| /* No allocated inodes in this chunk; skip it. */ |
| if (iwag->skip_empty && irec->ir_freecount == irec->ir_count) { |
| error = xfs_btree_increment(cur, 0, &has_more); |
| if (error) |
| break; |
| continue; |
| } |
| |
| /* |
| * Start readahead for this inode chunk in anticipation of |
| * walking the inodes. |
| */ |
| if (iwag->iwalk_fn) |
| xfs_iwalk_ichunk_ra(mp, pag, irec); |
| |
| /* |
| * If there's space in the buffer for more records, increment |
| * the btree cursor and grab more. |
| */ |
| if (++iwag->nr_recs < iwag->sz_recs) { |
| error = xfs_btree_increment(cur, 0, &has_more); |
| if (error || !has_more) |
| break; |
| continue; |
| } |
| |
| /* |
| * Otherwise, we need to save cursor state and run the callback |
| * function on the cached records. The run_callbacks function |
| * is supposed to return a cursor pointing to the record where |
| * we would be if we had been able to increment like above. |
| */ |
| ASSERT(has_more); |
| error = xfs_iwalk_run_callbacks(iwag, &cur, &agi_bp, &has_more); |
| } |
| |
| if (iwag->nr_recs == 0 || error) |
| goto out; |
| |
| /* Walk the unprocessed records in the cache. */ |
| error = xfs_iwalk_run_callbacks(iwag, &cur, &agi_bp, &has_more); |
| |
| out: |
| xfs_iwalk_del_inobt(iwag->tp, &cur, &agi_bp, error); |
| return error; |
| } |
| |
| /* |
| * We experimentally determined that the reduction in ioctl call overhead |
| * diminishes when userspace asks for more than 2048 inodes, so we'll cap |
| * prefetch at this point. |
| */ |
| #define IWALK_MAX_INODE_PREFETCH (2048U) |
| |
| /* |
| * Given the number of inodes to prefetch, set the number of inobt records that |
| * we cache in memory, which controls the number of inodes we try to read |
| * ahead. Set the maximum if @inodes == 0. |
| */ |
| static inline unsigned int |
| xfs_iwalk_prefetch( |
| unsigned int inodes) |
| { |
| unsigned int inobt_records; |
| |
| /* |
| * If the caller didn't tell us the number of inodes they wanted, |
| * assume the maximum prefetch possible for best performance. |
| * Otherwise, cap prefetch at that maximum so that we don't start an |
| * absurd amount of prefetch. |
| */ |
| if (inodes == 0) |
| inodes = IWALK_MAX_INODE_PREFETCH; |
| inodes = min(inodes, IWALK_MAX_INODE_PREFETCH); |
| |
| /* Round the inode count up to a full chunk. */ |
| inodes = round_up(inodes, XFS_INODES_PER_CHUNK); |
| |
| /* |
| * In order to convert the number of inodes to prefetch into an |
| * estimate of the number of inobt records to cache, we require a |
| * conversion factor that reflects our expectations of the average |
| * loading factor of an inode chunk. Based on data gathered, most |
| * (but not all) filesystems manage to keep the inode chunks totally |
| * full, so we'll underestimate slightly so that our readahead will |
| * still deliver the performance we want on aging filesystems: |
| * |
| * inobt = inodes / (INODES_PER_CHUNK * (4 / 5)); |
| * |
| * The funny math is to avoid integer division. |
| */ |
| inobt_records = (inodes * 5) / (4 * XFS_INODES_PER_CHUNK); |
| |
| /* |
| * Allocate enough space to prefetch at least two inobt records so that |
| * we can cache both the record where the iwalk started and the next |
| * record. This simplifies the AG inode walk loop setup code. |
| */ |
| return max(inobt_records, 2U); |
| } |
| |
| /* |
| * Walk all inodes in the filesystem starting from @startino. The @iwalk_fn |
| * will be called for each allocated inode, being passed the inode's number and |
| * @data. @max_prefetch controls how many inobt records' worth of inodes we |
| * try to readahead. |
| */ |
| int |
| xfs_iwalk( |
| struct xfs_mount *mp, |
| struct xfs_trans *tp, |
| xfs_ino_t startino, |
| unsigned int flags, |
| xfs_iwalk_fn iwalk_fn, |
| unsigned int inode_records, |
| void *data) |
| { |
| struct xfs_iwalk_ag iwag = { |
| .mp = mp, |
| .tp = tp, |
| .iwalk_fn = iwalk_fn, |
| .data = data, |
| .startino = startino, |
| .sz_recs = xfs_iwalk_prefetch(inode_records), |
| .trim_start = 1, |
| .skip_empty = 1, |
| .pwork = XFS_PWORK_SINGLE_THREADED, |
| .lastino = NULLFSINO, |
| }; |
| struct xfs_perag *pag; |
| xfs_agnumber_t agno = XFS_INO_TO_AGNO(mp, startino); |
| int error; |
| |
| ASSERT(agno < mp->m_sb.sb_agcount); |
| ASSERT(!(flags & ~XFS_IWALK_FLAGS_ALL)); |
| |
| error = xfs_iwalk_alloc(&iwag); |
| if (error) |
| return error; |
| |
| for_each_perag_from(mp, agno, pag) { |
| iwag.pag = pag; |
| error = xfs_iwalk_ag(&iwag); |
| if (error) |
| break; |
| iwag.startino = XFS_AGINO_TO_INO(mp, agno + 1, 0); |
| if (flags & XFS_INOBT_WALK_SAME_AG) |
| break; |
| iwag.pag = NULL; |
| } |
| |
| if (iwag.pag) |
| xfs_perag_rele(pag); |
| xfs_iwalk_free(&iwag); |
| return error; |
| } |
| |
| /* Run per-thread iwalk work. */ |
| static int |
| xfs_iwalk_ag_work( |
| struct xfs_mount *mp, |
| struct xfs_pwork *pwork) |
| { |
| struct xfs_iwalk_ag *iwag; |
| int error = 0; |
| |
| iwag = container_of(pwork, struct xfs_iwalk_ag, pwork); |
| if (xfs_pwork_want_abort(pwork)) |
| goto out; |
| |
| error = xfs_iwalk_alloc(iwag); |
| if (error) |
| goto out; |
| /* |
| * Grab an empty transaction so that we can use its recursive buffer |
| * locking abilities to detect cycles in the inobt without deadlocking. |
| */ |
| error = xfs_trans_alloc_empty(mp, &iwag->tp); |
| if (error) |
| goto out; |
| iwag->drop_trans = 1; |
| |
| error = xfs_iwalk_ag(iwag); |
| if (iwag->tp) |
| xfs_trans_cancel(iwag->tp); |
| xfs_iwalk_free(iwag); |
| out: |
| xfs_perag_put(iwag->pag); |
| kfree(iwag); |
| return error; |
| } |
| |
| /* |
| * Walk all the inodes in the filesystem using multiple threads to process each |
| * AG. |
| */ |
| int |
| xfs_iwalk_threaded( |
| struct xfs_mount *mp, |
| xfs_ino_t startino, |
| unsigned int flags, |
| xfs_iwalk_fn iwalk_fn, |
| unsigned int inode_records, |
| bool polled, |
| void *data) |
| { |
| struct xfs_pwork_ctl pctl; |
| struct xfs_perag *pag; |
| xfs_agnumber_t agno = XFS_INO_TO_AGNO(mp, startino); |
| int error; |
| |
| ASSERT(agno < mp->m_sb.sb_agcount); |
| ASSERT(!(flags & ~XFS_IWALK_FLAGS_ALL)); |
| |
| error = xfs_pwork_init(mp, &pctl, xfs_iwalk_ag_work, "xfs_iwalk"); |
| if (error) |
| return error; |
| |
| for_each_perag_from(mp, agno, pag) { |
| struct xfs_iwalk_ag *iwag; |
| |
| if (xfs_pwork_ctl_want_abort(&pctl)) |
| break; |
| |
| iwag = kzalloc(sizeof(struct xfs_iwalk_ag), |
| GFP_KERNEL | __GFP_NOFAIL); |
| iwag->mp = mp; |
| |
| /* |
| * perag is being handed off to async work, so take a passive |
| * reference for the async work to release. |
| */ |
| iwag->pag = xfs_perag_hold(pag); |
| iwag->iwalk_fn = iwalk_fn; |
| iwag->data = data; |
| iwag->startino = startino; |
| iwag->sz_recs = xfs_iwalk_prefetch(inode_records); |
| iwag->lastino = NULLFSINO; |
| xfs_pwork_queue(&pctl, &iwag->pwork); |
| startino = XFS_AGINO_TO_INO(mp, pag->pag_agno + 1, 0); |
| if (flags & XFS_INOBT_WALK_SAME_AG) |
| break; |
| } |
| if (pag) |
| xfs_perag_rele(pag); |
| if (polled) |
| xfs_pwork_poll(&pctl); |
| return xfs_pwork_destroy(&pctl); |
| } |
| |
| /* |
| * Allow callers to cache up to a page's worth of inobt records. This reflects |
| * the existing inumbers prefetching behavior. Since the inobt walk does not |
| * itself do anything with the inobt records, we can set a fairly high limit |
| * here. |
| */ |
| #define MAX_INOBT_WALK_PREFETCH \ |
| (PAGE_SIZE / sizeof(struct xfs_inobt_rec_incore)) |
| |
| /* |
| * Given the number of records that the user wanted, set the number of inobt |
| * records that we buffer in memory. Set the maximum if @inobt_records == 0. |
| */ |
| static inline unsigned int |
| xfs_inobt_walk_prefetch( |
| unsigned int inobt_records) |
| { |
| /* |
| * If the caller didn't tell us the number of inobt records they |
| * wanted, assume the maximum prefetch possible for best performance. |
| */ |
| if (inobt_records == 0) |
| inobt_records = MAX_INOBT_WALK_PREFETCH; |
| |
| /* |
| * Allocate enough space to prefetch at least two inobt records so that |
| * we can cache both the record where the iwalk started and the next |
| * record. This simplifies the AG inode walk loop setup code. |
| */ |
| inobt_records = max(inobt_records, 2U); |
| |
| /* |
| * Cap prefetch at that maximum so that we don't use an absurd amount |
| * of memory. |
| */ |
| return min_t(unsigned int, inobt_records, MAX_INOBT_WALK_PREFETCH); |
| } |
| |
| /* |
| * Walk all inode btree records in the filesystem starting from @startino. The |
| * @inobt_walk_fn will be called for each btree record, being passed the incore |
| * record and @data. @max_prefetch controls how many inobt records we try to |
| * cache ahead of time. |
| */ |
| int |
| xfs_inobt_walk( |
| struct xfs_mount *mp, |
| struct xfs_trans *tp, |
| xfs_ino_t startino, |
| unsigned int flags, |
| xfs_inobt_walk_fn inobt_walk_fn, |
| unsigned int inobt_records, |
| void *data) |
| { |
| struct xfs_iwalk_ag iwag = { |
| .mp = mp, |
| .tp = tp, |
| .inobt_walk_fn = inobt_walk_fn, |
| .data = data, |
| .startino = startino, |
| .sz_recs = xfs_inobt_walk_prefetch(inobt_records), |
| .pwork = XFS_PWORK_SINGLE_THREADED, |
| .lastino = NULLFSINO, |
| }; |
| struct xfs_perag *pag; |
| xfs_agnumber_t agno = XFS_INO_TO_AGNO(mp, startino); |
| int error; |
| |
| ASSERT(agno < mp->m_sb.sb_agcount); |
| ASSERT(!(flags & ~XFS_INOBT_WALK_FLAGS_ALL)); |
| |
| error = xfs_iwalk_alloc(&iwag); |
| if (error) |
| return error; |
| |
| for_each_perag_from(mp, agno, pag) { |
| iwag.pag = pag; |
| error = xfs_iwalk_ag(&iwag); |
| if (error) |
| break; |
| iwag.startino = XFS_AGINO_TO_INO(mp, pag->pag_agno + 1, 0); |
| if (flags & XFS_INOBT_WALK_SAME_AG) |
| break; |
| iwag.pag = NULL; |
| } |
| |
| if (iwag.pag) |
| xfs_perag_rele(pag); |
| xfs_iwalk_free(&iwag); |
| return error; |
| } |