| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * hdaps.c - driver for IBM's Hard Drive Active Protection System |
| * |
| * Copyright (C) 2005 Robert Love <rml@novell.com> |
| * Copyright (C) 2005 Jesper Juhl <jj@chaosbits.net> |
| * |
| * The HardDisk Active Protection System (hdaps) is present in IBM ThinkPads |
| * starting with the R40, T41, and X40. It provides a basic two-axis |
| * accelerometer and other data, such as the device's temperature. |
| * |
| * This driver is based on the document by Mark A. Smith available at |
| * http://www.almaden.ibm.com/cs/people/marksmith/tpaps.html and a lot of trial |
| * and error. |
| */ |
| |
| #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt |
| |
| #include <linux/delay.h> |
| #include <linux/platform_device.h> |
| #include <linux/input.h> |
| #include <linux/kernel.h> |
| #include <linux/mutex.h> |
| #include <linux/module.h> |
| #include <linux/timer.h> |
| #include <linux/dmi.h> |
| #include <linux/jiffies.h> |
| #include <linux/io.h> |
| |
| #define HDAPS_LOW_PORT 0x1600 /* first port used by hdaps */ |
| #define HDAPS_NR_PORTS 0x30 /* number of ports: 0x1600 - 0x162f */ |
| |
| #define HDAPS_PORT_STATE 0x1611 /* device state */ |
| #define HDAPS_PORT_YPOS 0x1612 /* y-axis position */ |
| #define HDAPS_PORT_XPOS 0x1614 /* x-axis position */ |
| #define HDAPS_PORT_TEMP1 0x1616 /* device temperature, in Celsius */ |
| #define HDAPS_PORT_YVAR 0x1617 /* y-axis variance (what is this?) */ |
| #define HDAPS_PORT_XVAR 0x1619 /* x-axis variance (what is this?) */ |
| #define HDAPS_PORT_TEMP2 0x161b /* device temperature (again?) */ |
| #define HDAPS_PORT_UNKNOWN 0x161c /* what is this? */ |
| #define HDAPS_PORT_KMACT 0x161d /* keyboard or mouse activity */ |
| |
| #define STATE_FRESH 0x50 /* accelerometer data is fresh */ |
| |
| #define KEYBD_MASK 0x20 /* set if keyboard activity */ |
| #define MOUSE_MASK 0x40 /* set if mouse activity */ |
| #define KEYBD_ISSET(n) (!! (n & KEYBD_MASK)) /* keyboard used? */ |
| #define MOUSE_ISSET(n) (!! (n & MOUSE_MASK)) /* mouse used? */ |
| |
| #define INIT_TIMEOUT_MSECS 4000 /* wait up to 4s for device init ... */ |
| #define INIT_WAIT_MSECS 200 /* ... in 200ms increments */ |
| |
| #define HDAPS_POLL_INTERVAL 50 /* poll for input every 1/20s (50 ms)*/ |
| #define HDAPS_INPUT_FUZZ 4 /* input event threshold */ |
| #define HDAPS_INPUT_FLAT 4 |
| |
| #define HDAPS_X_AXIS (1 << 0) |
| #define HDAPS_Y_AXIS (1 << 1) |
| #define HDAPS_BOTH_AXES (HDAPS_X_AXIS | HDAPS_Y_AXIS) |
| |
| static struct platform_device *pdev; |
| static struct input_dev *hdaps_idev; |
| static unsigned int hdaps_invert; |
| static u8 km_activity; |
| static int rest_x; |
| static int rest_y; |
| |
| static DEFINE_MUTEX(hdaps_mtx); |
| |
| /* |
| * __get_latch - Get the value from a given port. Callers must hold hdaps_mtx. |
| */ |
| static inline u8 __get_latch(u16 port) |
| { |
| return inb(port) & 0xff; |
| } |
| |
| /* |
| * __check_latch - Check a port latch for a given value. Returns zero if the |
| * port contains the given value. Callers must hold hdaps_mtx. |
| */ |
| static inline int __check_latch(u16 port, u8 val) |
| { |
| if (__get_latch(port) == val) |
| return 0; |
| return -EINVAL; |
| } |
| |
| /* |
| * __wait_latch - Wait up to 100us for a port latch to get a certain value, |
| * returning zero if the value is obtained. Callers must hold hdaps_mtx. |
| */ |
| static int __wait_latch(u16 port, u8 val) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < 20; i++) { |
| if (!__check_latch(port, val)) |
| return 0; |
| udelay(5); |
| } |
| |
| return -EIO; |
| } |
| |
| /* |
| * __device_refresh - request a refresh from the accelerometer. Does not wait |
| * for refresh to complete. Callers must hold hdaps_mtx. |
| */ |
| static void __device_refresh(void) |
| { |
| udelay(200); |
| if (inb(0x1604) != STATE_FRESH) { |
| outb(0x11, 0x1610); |
| outb(0x01, 0x161f); |
| } |
| } |
| |
| /* |
| * __device_refresh_sync - request a synchronous refresh from the |
| * accelerometer. We wait for the refresh to complete. Returns zero if |
| * successful and nonzero on error. Callers must hold hdaps_mtx. |
| */ |
| static int __device_refresh_sync(void) |
| { |
| __device_refresh(); |
| return __wait_latch(0x1604, STATE_FRESH); |
| } |
| |
| /* |
| * __device_complete - indicate to the accelerometer that we are done reading |
| * data, and then initiate an async refresh. Callers must hold hdaps_mtx. |
| */ |
| static inline void __device_complete(void) |
| { |
| inb(0x161f); |
| inb(0x1604); |
| __device_refresh(); |
| } |
| |
| /* |
| * hdaps_readb_one - reads a byte from a single I/O port, placing the value in |
| * the given pointer. Returns zero on success or a negative error on failure. |
| * Can sleep. |
| */ |
| static int hdaps_readb_one(unsigned int port, u8 *val) |
| { |
| int ret; |
| |
| mutex_lock(&hdaps_mtx); |
| |
| /* do a sync refresh -- we need to be sure that we read fresh data */ |
| ret = __device_refresh_sync(); |
| if (ret) |
| goto out; |
| |
| *val = inb(port); |
| __device_complete(); |
| |
| out: |
| mutex_unlock(&hdaps_mtx); |
| return ret; |
| } |
| |
| /* __hdaps_read_pair - internal lockless helper for hdaps_read_pair(). */ |
| static int __hdaps_read_pair(unsigned int port1, unsigned int port2, |
| int *x, int *y) |
| { |
| /* do a sync refresh -- we need to be sure that we read fresh data */ |
| if (__device_refresh_sync()) |
| return -EIO; |
| |
| *y = inw(port2); |
| *x = inw(port1); |
| km_activity = inb(HDAPS_PORT_KMACT); |
| __device_complete(); |
| |
| /* hdaps_invert is a bitvector to negate the axes */ |
| if (hdaps_invert & HDAPS_X_AXIS) |
| *x = -*x; |
| if (hdaps_invert & HDAPS_Y_AXIS) |
| *y = -*y; |
| |
| return 0; |
| } |
| |
| /* |
| * hdaps_read_pair - reads the values from a pair of ports, placing the values |
| * in the given pointers. Returns zero on success. Can sleep. |
| */ |
| static int hdaps_read_pair(unsigned int port1, unsigned int port2, |
| int *val1, int *val2) |
| { |
| int ret; |
| |
| mutex_lock(&hdaps_mtx); |
| ret = __hdaps_read_pair(port1, port2, val1, val2); |
| mutex_unlock(&hdaps_mtx); |
| |
| return ret; |
| } |
| |
| /* |
| * hdaps_device_init - initialize the accelerometer. Returns zero on success |
| * and negative error code on failure. Can sleep. |
| */ |
| static int hdaps_device_init(void) |
| { |
| int total, ret = -ENXIO; |
| |
| mutex_lock(&hdaps_mtx); |
| |
| outb(0x13, 0x1610); |
| outb(0x01, 0x161f); |
| if (__wait_latch(0x161f, 0x00)) |
| goto out; |
| |
| /* |
| * Most ThinkPads return 0x01. |
| * |
| * Others--namely the R50p, T41p, and T42p--return 0x03. These laptops |
| * have "inverted" axises. |
| * |
| * The 0x02 value occurs when the chip has been previously initialized. |
| */ |
| if (__check_latch(0x1611, 0x03) && |
| __check_latch(0x1611, 0x02) && |
| __check_latch(0x1611, 0x01)) |
| goto out; |
| |
| printk(KERN_DEBUG "hdaps: initial latch check good (0x%02x)\n", |
| __get_latch(0x1611)); |
| |
| outb(0x17, 0x1610); |
| outb(0x81, 0x1611); |
| outb(0x01, 0x161f); |
| if (__wait_latch(0x161f, 0x00)) |
| goto out; |
| if (__wait_latch(0x1611, 0x00)) |
| goto out; |
| if (__wait_latch(0x1612, 0x60)) |
| goto out; |
| if (__wait_latch(0x1613, 0x00)) |
| goto out; |
| outb(0x14, 0x1610); |
| outb(0x01, 0x1611); |
| outb(0x01, 0x161f); |
| if (__wait_latch(0x161f, 0x00)) |
| goto out; |
| outb(0x10, 0x1610); |
| outb(0xc8, 0x1611); |
| outb(0x00, 0x1612); |
| outb(0x02, 0x1613); |
| outb(0x01, 0x161f); |
| if (__wait_latch(0x161f, 0x00)) |
| goto out; |
| if (__device_refresh_sync()) |
| goto out; |
| if (__wait_latch(0x1611, 0x00)) |
| goto out; |
| |
| /* we have done our dance, now let's wait for the applause */ |
| for (total = INIT_TIMEOUT_MSECS; total > 0; total -= INIT_WAIT_MSECS) { |
| int x, y; |
| |
| /* a read of the device helps push it into action */ |
| __hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y); |
| if (!__wait_latch(0x1611, 0x02)) { |
| ret = 0; |
| break; |
| } |
| |
| msleep(INIT_WAIT_MSECS); |
| } |
| |
| out: |
| mutex_unlock(&hdaps_mtx); |
| return ret; |
| } |
| |
| |
| /* Device model stuff */ |
| |
| static int hdaps_probe(struct platform_device *dev) |
| { |
| int ret; |
| |
| ret = hdaps_device_init(); |
| if (ret) |
| return ret; |
| |
| pr_info("device successfully initialized\n"); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int hdaps_resume(struct device *dev) |
| { |
| return hdaps_device_init(); |
| } |
| #endif |
| |
| static SIMPLE_DEV_PM_OPS(hdaps_pm, NULL, hdaps_resume); |
| |
| static struct platform_driver hdaps_driver = { |
| .probe = hdaps_probe, |
| .driver = { |
| .name = "hdaps", |
| .pm = &hdaps_pm, |
| }, |
| }; |
| |
| /* |
| * hdaps_calibrate - Set our "resting" values. Callers must hold hdaps_mtx. |
| */ |
| static void hdaps_calibrate(void) |
| { |
| __hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &rest_x, &rest_y); |
| } |
| |
| static void hdaps_mousedev_poll(struct input_dev *input_dev) |
| { |
| int x, y; |
| |
| mutex_lock(&hdaps_mtx); |
| |
| if (__hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y)) |
| goto out; |
| |
| input_report_abs(input_dev, ABS_X, x - rest_x); |
| input_report_abs(input_dev, ABS_Y, y - rest_y); |
| input_sync(input_dev); |
| |
| out: |
| mutex_unlock(&hdaps_mtx); |
| } |
| |
| |
| /* Sysfs Files */ |
| |
| static ssize_t hdaps_position_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int ret, x, y; |
| |
| ret = hdaps_read_pair(HDAPS_PORT_XPOS, HDAPS_PORT_YPOS, &x, &y); |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "(%d,%d)\n", x, y); |
| } |
| |
| static ssize_t hdaps_variance_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| int ret, x, y; |
| |
| ret = hdaps_read_pair(HDAPS_PORT_XVAR, HDAPS_PORT_YVAR, &x, &y); |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "(%d,%d)\n", x, y); |
| } |
| |
| static ssize_t hdaps_temp1_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| u8 temp; |
| int ret; |
| |
| ret = hdaps_readb_one(HDAPS_PORT_TEMP1, &temp); |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "%u\n", temp); |
| } |
| |
| static ssize_t hdaps_temp2_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| u8 temp; |
| int ret; |
| |
| ret = hdaps_readb_one(HDAPS_PORT_TEMP2, &temp); |
| if (ret) |
| return ret; |
| |
| return sprintf(buf, "%u\n", temp); |
| } |
| |
| static ssize_t hdaps_keyboard_activity_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%u\n", KEYBD_ISSET(km_activity)); |
| } |
| |
| static ssize_t hdaps_mouse_activity_show(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| return sprintf(buf, "%u\n", MOUSE_ISSET(km_activity)); |
| } |
| |
| static ssize_t hdaps_calibrate_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "(%d,%d)\n", rest_x, rest_y); |
| } |
| |
| static ssize_t hdaps_calibrate_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| mutex_lock(&hdaps_mtx); |
| hdaps_calibrate(); |
| mutex_unlock(&hdaps_mtx); |
| |
| return count; |
| } |
| |
| static ssize_t hdaps_invert_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%u\n", hdaps_invert); |
| } |
| |
| static ssize_t hdaps_invert_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| int invert; |
| |
| if (sscanf(buf, "%d", &invert) != 1 || |
| invert < 0 || invert > HDAPS_BOTH_AXES) |
| return -EINVAL; |
| |
| hdaps_invert = invert; |
| hdaps_calibrate(); |
| |
| return count; |
| } |
| |
| static DEVICE_ATTR(position, 0444, hdaps_position_show, NULL); |
| static DEVICE_ATTR(variance, 0444, hdaps_variance_show, NULL); |
| static DEVICE_ATTR(temp1, 0444, hdaps_temp1_show, NULL); |
| static DEVICE_ATTR(temp2, 0444, hdaps_temp2_show, NULL); |
| static DEVICE_ATTR(keyboard_activity, 0444, hdaps_keyboard_activity_show, NULL); |
| static DEVICE_ATTR(mouse_activity, 0444, hdaps_mouse_activity_show, NULL); |
| static DEVICE_ATTR(calibrate, 0644, hdaps_calibrate_show,hdaps_calibrate_store); |
| static DEVICE_ATTR(invert, 0644, hdaps_invert_show, hdaps_invert_store); |
| |
| static struct attribute *hdaps_attributes[] = { |
| &dev_attr_position.attr, |
| &dev_attr_variance.attr, |
| &dev_attr_temp1.attr, |
| &dev_attr_temp2.attr, |
| &dev_attr_keyboard_activity.attr, |
| &dev_attr_mouse_activity.attr, |
| &dev_attr_calibrate.attr, |
| &dev_attr_invert.attr, |
| NULL, |
| }; |
| |
| static const struct attribute_group hdaps_attribute_group = { |
| .attrs = hdaps_attributes, |
| }; |
| |
| |
| /* Module stuff */ |
| |
| /* hdaps_dmi_match - found a match. return one, short-circuiting the hunt. */ |
| static int __init hdaps_dmi_match(const struct dmi_system_id *id) |
| { |
| pr_info("%s detected\n", id->ident); |
| return 1; |
| } |
| |
| /* hdaps_dmi_match_invert - found an inverted match. */ |
| static int __init hdaps_dmi_match_invert(const struct dmi_system_id *id) |
| { |
| hdaps_invert = (unsigned long)id->driver_data; |
| pr_info("inverting axis (%u) readings\n", hdaps_invert); |
| return hdaps_dmi_match(id); |
| } |
| |
| #define HDAPS_DMI_MATCH_INVERT(vendor, model, axes) { \ |
| .ident = vendor " " model, \ |
| .callback = hdaps_dmi_match_invert, \ |
| .driver_data = (void *)axes, \ |
| .matches = { \ |
| DMI_MATCH(DMI_BOARD_VENDOR, vendor), \ |
| DMI_MATCH(DMI_PRODUCT_VERSION, model) \ |
| } \ |
| } |
| |
| #define HDAPS_DMI_MATCH_NORMAL(vendor, model) \ |
| HDAPS_DMI_MATCH_INVERT(vendor, model, 0) |
| |
| /* Note that HDAPS_DMI_MATCH_NORMAL("ThinkPad T42") would match |
| "ThinkPad T42p", so the order of the entries matters. |
| If your ThinkPad is not recognized, please update to latest |
| BIOS. This is especially the case for some R52 ThinkPads. */ |
| static const struct dmi_system_id hdaps_whitelist[] __initconst = { |
| HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad R50p", HDAPS_BOTH_AXES), |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R50"), |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"), |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"), |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i", HDAPS_BOTH_AXES), |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61", HDAPS_BOTH_AXES), |
| HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p", HDAPS_BOTH_AXES), |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"), |
| HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p", HDAPS_BOTH_AXES), |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"), |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"), |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T400", HDAPS_BOTH_AXES), |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60", HDAPS_BOTH_AXES), |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61p", HDAPS_BOTH_AXES), |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61", HDAPS_BOTH_AXES), |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"), |
| HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad X41", HDAPS_Y_AXIS), |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60", HDAPS_BOTH_AXES), |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61s", HDAPS_BOTH_AXES), |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61", HDAPS_BOTH_AXES), |
| HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad Z60m"), |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61m", HDAPS_BOTH_AXES), |
| HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61p", HDAPS_BOTH_AXES), |
| { .ident = NULL } |
| }; |
| |
| static int __init hdaps_init(void) |
| { |
| int ret; |
| |
| if (!dmi_check_system(hdaps_whitelist)) { |
| pr_warn("supported laptop not found!\n"); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| if (!request_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS, "hdaps")) { |
| ret = -ENXIO; |
| goto out; |
| } |
| |
| ret = platform_driver_register(&hdaps_driver); |
| if (ret) |
| goto out_region; |
| |
| pdev = platform_device_register_simple("hdaps", PLATFORM_DEVID_NONE, NULL, 0); |
| if (IS_ERR(pdev)) { |
| ret = PTR_ERR(pdev); |
| goto out_driver; |
| } |
| |
| ret = sysfs_create_group(&pdev->dev.kobj, &hdaps_attribute_group); |
| if (ret) |
| goto out_device; |
| |
| hdaps_idev = input_allocate_device(); |
| if (!hdaps_idev) { |
| ret = -ENOMEM; |
| goto out_group; |
| } |
| |
| /* initial calibrate for the input device */ |
| hdaps_calibrate(); |
| |
| /* initialize the input class */ |
| hdaps_idev->name = "hdaps"; |
| hdaps_idev->phys = "isa1600/input0"; |
| hdaps_idev->id.bustype = BUS_ISA; |
| hdaps_idev->dev.parent = &pdev->dev; |
| input_set_abs_params(hdaps_idev, ABS_X, |
| -256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT); |
| input_set_abs_params(hdaps_idev, ABS_Y, |
| -256, 256, HDAPS_INPUT_FUZZ, HDAPS_INPUT_FLAT); |
| |
| ret = input_setup_polling(hdaps_idev, hdaps_mousedev_poll); |
| if (ret) |
| goto out_idev; |
| |
| input_set_poll_interval(hdaps_idev, HDAPS_POLL_INTERVAL); |
| |
| ret = input_register_device(hdaps_idev); |
| if (ret) |
| goto out_idev; |
| |
| pr_info("driver successfully loaded\n"); |
| return 0; |
| |
| out_idev: |
| input_free_device(hdaps_idev); |
| out_group: |
| sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group); |
| out_device: |
| platform_device_unregister(pdev); |
| out_driver: |
| platform_driver_unregister(&hdaps_driver); |
| out_region: |
| release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS); |
| out: |
| pr_warn("driver init failed (ret=%d)!\n", ret); |
| return ret; |
| } |
| |
| static void __exit hdaps_exit(void) |
| { |
| input_unregister_device(hdaps_idev); |
| sysfs_remove_group(&pdev->dev.kobj, &hdaps_attribute_group); |
| platform_device_unregister(pdev); |
| platform_driver_unregister(&hdaps_driver); |
| release_region(HDAPS_LOW_PORT, HDAPS_NR_PORTS); |
| |
| pr_info("driver unloaded\n"); |
| } |
| |
| module_init(hdaps_init); |
| module_exit(hdaps_exit); |
| |
| module_param_named(invert, hdaps_invert, int, 0); |
| MODULE_PARM_DESC(invert, "invert data along each axis. 1 invert x-axis, " |
| "2 invert y-axis, 3 invert both axes."); |
| |
| MODULE_AUTHOR("Robert Love"); |
| MODULE_DESCRIPTION("IBM Hard Drive Active Protection System (HDAPS) driver"); |
| MODULE_LICENSE("GPL v2"); |