| // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| // |
| // Device Tree file for LX2160ARDB |
| // |
| // Copyright 2018 NXP |
| |
| /dts-v1/; |
| |
| #include "fsl-lx2160a.dtsi" |
| |
| / { |
| model = "NXP Layerscape LX2160ARDB"; |
| compatible = "fsl,lx2160a-rdb", "fsl,lx2160a"; |
| |
| aliases { |
| crypto = &crypto; |
| serial0 = &uart0; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| sb_3v3: regulator-sb3v3 { |
| compatible = "regulator-fixed"; |
| regulator-name = "MC34717-3.3VSB"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| |
| &crypto { |
| status = "okay"; |
| }; |
| |
| &dpmac3 { |
| phy-handle = <&aquantia_phy1>; |
| phy-connection-type = "usxgmii"; |
| managed = "in-band-status"; |
| }; |
| |
| &dpmac4 { |
| phy-handle = <&aquantia_phy2>; |
| phy-connection-type = "usxgmii"; |
| managed = "in-band-status"; |
| }; |
| |
| &dpmac17 { |
| phy-handle = <&rgmii_phy1>; |
| phy-connection-type = "rgmii-id"; |
| }; |
| |
| &dpmac18 { |
| phy-handle = <&rgmii_phy2>; |
| phy-connection-type = "rgmii-id"; |
| }; |
| |
| &emdio1 { |
| status = "okay"; |
| |
| rgmii_phy1: ethernet-phy@1 { |
| /* AR8035 PHY */ |
| compatible = "ethernet-phy-id004d.d072"; |
| reg = <0x1>; |
| eee-broken-1000t; |
| }; |
| |
| rgmii_phy2: ethernet-phy@2 { |
| /* AR8035 PHY */ |
| compatible = "ethernet-phy-id004d.d072"; |
| reg = <0x2>; |
| eee-broken-1000t; |
| }; |
| |
| aquantia_phy1: ethernet-phy@4 { |
| /* AQR107 PHY */ |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x4>; |
| }; |
| |
| aquantia_phy2: ethernet-phy@5 { |
| /* AQR107 PHY */ |
| compatible = "ethernet-phy-ieee802.3-c45"; |
| reg = <0x5>; |
| }; |
| }; |
| |
| &esdhc0 { |
| sd-uhs-sdr104; |
| sd-uhs-sdr50; |
| sd-uhs-sdr25; |
| sd-uhs-sdr12; |
| status = "okay"; |
| }; |
| |
| &esdhc1 { |
| mmc-hs200-1_8v; |
| mmc-hs400-1_8v; |
| bus-width = <8>; |
| status = "okay"; |
| }; |
| |
| &fspi { |
| status = "okay"; |
| |
| mt35xu512aba0: flash@0 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "jedec,spi-nor"; |
| m25p,fast-read; |
| spi-max-frequency = <50000000>; |
| reg = <0>; |
| spi-rx-bus-width = <8>; |
| spi-tx-bus-width = <8>; |
| }; |
| |
| mt35xu512aba1: flash@1 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "jedec,spi-nor"; |
| m25p,fast-read; |
| spi-max-frequency = <50000000>; |
| reg = <1>; |
| spi-rx-bus-width = <8>; |
| spi-tx-bus-width = <8>; |
| }; |
| }; |
| |
| &i2c0 { |
| status = "okay"; |
| |
| i2c-mux@77 { |
| compatible = "nxp,pca9547"; |
| reg = <0x77>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| i2c@2 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x2>; |
| |
| power-monitor@40 { |
| compatible = "ti,ina220"; |
| reg = <0x40>; |
| shunt-resistor = <500>; |
| }; |
| }; |
| |
| i2c@3 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x3>; |
| |
| temperature-sensor@4c { |
| compatible = "nxp,sa56004"; |
| reg = <0x4c>; |
| vcc-supply = <&sb_3v3>; |
| }; |
| |
| temperature-sensor@4d { |
| compatible = "nxp,sa56004"; |
| reg = <0x4d>; |
| vcc-supply = <&sb_3v3>; |
| }; |
| }; |
| }; |
| }; |
| |
| &i2c4 { |
| status = "okay"; |
| |
| rtc@51 { |
| compatible = "nxp,pcf2129"; |
| reg = <0x51>; |
| // IRQ10_B |
| interrupts = <0 150 0x4>; |
| }; |
| }; |
| |
| &pcs_mdio3 { |
| status = "okay"; |
| }; |
| |
| &pcs_mdio4 { |
| status = "okay"; |
| }; |
| |
| &sata0 { |
| status = "okay"; |
| }; |
| |
| &sata1 { |
| status = "okay"; |
| }; |
| |
| &sata2 { |
| status = "okay"; |
| }; |
| |
| &sata3 { |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| status = "okay"; |
| }; |
| |
| &uart1 { |
| status = "okay"; |
| }; |
| |
| &usb0 { |
| status = "okay"; |
| }; |
| |
| &usb1 { |
| status = "okay"; |
| }; |