| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1995 Linus Torvalds |
| * Copyright (C) 1995 Waldorf Electronics |
| * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03 Ralf Baechle |
| * Copyright (C) 1996 Stoned Elipot |
| * Copyright (C) 1999 Silicon Graphics, Inc. |
| * Copyright (C) 2000, 2001, 2002, 2007 Maciej W. Rozycki |
| */ |
| #include <linux/init.h> |
| #include <linux/ioport.h> |
| #include <linux/export.h> |
| #include <linux/screen_info.h> |
| #include <linux/memblock.h> |
| #include <linux/initrd.h> |
| #include <linux/root_dev.h> |
| #include <linux/highmem.h> |
| #include <linux/console.h> |
| #include <linux/pfn.h> |
| #include <linux/debugfs.h> |
| #include <linux/kexec.h> |
| #include <linux/sizes.h> |
| #include <linux/device.h> |
| #include <linux/dma-map-ops.h> |
| #include <linux/decompress/generic.h> |
| #include <linux/of_fdt.h> |
| #include <linux/of_reserved_mem.h> |
| #include <linux/dmi.h> |
| |
| #include <asm/addrspace.h> |
| #include <asm/bootinfo.h> |
| #include <asm/bugs.h> |
| #include <asm/cache.h> |
| #include <asm/cdmm.h> |
| #include <asm/cpu.h> |
| #include <asm/debug.h> |
| #include <asm/dma-coherence.h> |
| #include <asm/sections.h> |
| #include <asm/setup.h> |
| #include <asm/smp-ops.h> |
| #include <asm/prom.h> |
| |
| #ifdef CONFIG_MIPS_ELF_APPENDED_DTB |
| const char __section(".appended_dtb") __appended_dtb[0x100000]; |
| #endif /* CONFIG_MIPS_ELF_APPENDED_DTB */ |
| |
| struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly; |
| |
| EXPORT_SYMBOL(cpu_data); |
| |
| #ifdef CONFIG_VT |
| struct screen_info screen_info; |
| #endif |
| |
| /* |
| * Setup information |
| * |
| * These are initialized so they are in the .data section |
| */ |
| unsigned long mips_machtype __read_mostly = MACH_UNKNOWN; |
| |
| EXPORT_SYMBOL(mips_machtype); |
| |
| static char __initdata command_line[COMMAND_LINE_SIZE]; |
| char __initdata arcs_cmdline[COMMAND_LINE_SIZE]; |
| |
| #ifdef CONFIG_CMDLINE_BOOL |
| static const char builtin_cmdline[] __initconst = CONFIG_CMDLINE; |
| #else |
| static const char builtin_cmdline[] __initconst = ""; |
| #endif |
| |
| /* |
| * mips_io_port_base is the begin of the address space to which x86 style |
| * I/O ports are mapped. |
| */ |
| unsigned long mips_io_port_base = -1; |
| EXPORT_SYMBOL(mips_io_port_base); |
| |
| static struct resource code_resource = { .name = "Kernel code", }; |
| static struct resource data_resource = { .name = "Kernel data", }; |
| static struct resource bss_resource = { .name = "Kernel bss", }; |
| |
| static void *detect_magic __initdata = detect_memory_region; |
| |
| #ifdef CONFIG_MIPS_AUTO_PFN_OFFSET |
| unsigned long ARCH_PFN_OFFSET; |
| EXPORT_SYMBOL(ARCH_PFN_OFFSET); |
| #endif |
| |
| void __init detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_addr_t sz_max) |
| { |
| void *dm = &detect_magic; |
| phys_addr_t size; |
| |
| for (size = sz_min; size < sz_max; size <<= 1) { |
| if (!memcmp(dm, dm + size, sizeof(detect_magic))) |
| break; |
| } |
| |
| pr_debug("Memory: %lluMB of RAM detected at 0x%llx (min: %lluMB, max: %lluMB)\n", |
| ((unsigned long long) size) / SZ_1M, |
| (unsigned long long) start, |
| ((unsigned long long) sz_min) / SZ_1M, |
| ((unsigned long long) sz_max) / SZ_1M); |
| |
| memblock_add(start, size); |
| } |
| |
| /* |
| * Manage initrd |
| */ |
| #ifdef CONFIG_BLK_DEV_INITRD |
| |
| static int __init rd_start_early(char *p) |
| { |
| unsigned long start = memparse(p, &p); |
| |
| #ifdef CONFIG_64BIT |
| /* Guess if the sign extension was forgotten by bootloader */ |
| if (start < XKPHYS) |
| start = (int)start; |
| #endif |
| initrd_start = start; |
| initrd_end += start; |
| return 0; |
| } |
| early_param("rd_start", rd_start_early); |
| |
| static int __init rd_size_early(char *p) |
| { |
| initrd_end += memparse(p, &p); |
| return 0; |
| } |
| early_param("rd_size", rd_size_early); |
| |
| /* it returns the next free pfn after initrd */ |
| static unsigned long __init init_initrd(void) |
| { |
| unsigned long end; |
| |
| /* |
| * Board specific code or command line parser should have |
| * already set up initrd_start and initrd_end. In these cases |
| * perfom sanity checks and use them if all looks good. |
| */ |
| if (!initrd_start || initrd_end <= initrd_start) |
| goto disable; |
| |
| if (initrd_start & ~PAGE_MASK) { |
| pr_err("initrd start must be page aligned\n"); |
| goto disable; |
| } |
| if (initrd_start < PAGE_OFFSET) { |
| pr_err("initrd start < PAGE_OFFSET\n"); |
| goto disable; |
| } |
| |
| /* |
| * Sanitize initrd addresses. For example firmware |
| * can't guess if they need to pass them through |
| * 64-bits values if the kernel has been built in pure |
| * 32-bit. We need also to switch from KSEG0 to XKPHYS |
| * addresses now, so the code can now safely use __pa(). |
| */ |
| end = __pa(initrd_end); |
| initrd_end = (unsigned long)__va(end); |
| initrd_start = (unsigned long)__va(__pa(initrd_start)); |
| |
| ROOT_DEV = Root_RAM0; |
| return PFN_UP(end); |
| disable: |
| initrd_start = 0; |
| initrd_end = 0; |
| return 0; |
| } |
| |
| /* In some conditions (e.g. big endian bootloader with a little endian |
| kernel), the initrd might appear byte swapped. Try to detect this and |
| byte swap it if needed. */ |
| static void __init maybe_bswap_initrd(void) |
| { |
| #if defined(CONFIG_CPU_CAVIUM_OCTEON) |
| u64 buf; |
| |
| /* Check for CPIO signature */ |
| if (!memcmp((void *)initrd_start, "070701", 6)) |
| return; |
| |
| /* Check for compressed initrd */ |
| if (decompress_method((unsigned char *)initrd_start, 8, NULL)) |
| return; |
| |
| /* Try again with a byte swapped header */ |
| buf = swab64p((u64 *)initrd_start); |
| if (!memcmp(&buf, "070701", 6) || |
| decompress_method((unsigned char *)(&buf), 8, NULL)) { |
| unsigned long i; |
| |
| pr_info("Byteswapped initrd detected\n"); |
| for (i = initrd_start; i < ALIGN(initrd_end, 8); i += 8) |
| swab64s((u64 *)i); |
| } |
| #endif |
| } |
| |
| static void __init finalize_initrd(void) |
| { |
| unsigned long size = initrd_end - initrd_start; |
| |
| if (size == 0) { |
| printk(KERN_INFO "Initrd not found or empty"); |
| goto disable; |
| } |
| if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) { |
| printk(KERN_ERR "Initrd extends beyond end of memory"); |
| goto disable; |
| } |
| |
| maybe_bswap_initrd(); |
| |
| memblock_reserve(__pa(initrd_start), size); |
| initrd_below_start_ok = 1; |
| |
| pr_info("Initial ramdisk at: 0x%lx (%lu bytes)\n", |
| initrd_start, size); |
| return; |
| disable: |
| printk(KERN_CONT " - disabling initrd\n"); |
| initrd_start = 0; |
| initrd_end = 0; |
| } |
| |
| #else /* !CONFIG_BLK_DEV_INITRD */ |
| |
| static unsigned long __init init_initrd(void) |
| { |
| return 0; |
| } |
| |
| #define finalize_initrd() do {} while (0) |
| |
| #endif |
| |
| /* |
| * Initialize the bootmem allocator. It also setup initrd related data |
| * if needed. |
| */ |
| #if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON64) && defined(CONFIG_NUMA)) |
| |
| static void __init bootmem_init(void) |
| { |
| init_initrd(); |
| finalize_initrd(); |
| } |
| |
| #else /* !CONFIG_SGI_IP27 */ |
| |
| static void __init bootmem_init(void) |
| { |
| phys_addr_t ramstart, ramend; |
| unsigned long start, end; |
| int i; |
| |
| ramstart = memblock_start_of_DRAM(); |
| ramend = memblock_end_of_DRAM(); |
| |
| /* |
| * Sanity check any INITRD first. We don't take it into account |
| * for bootmem setup initially, rely on the end-of-kernel-code |
| * as our memory range starting point. Once bootmem is inited we |
| * will reserve the area used for the initrd. |
| */ |
| init_initrd(); |
| |
| /* Reserve memory occupied by kernel. */ |
| memblock_reserve(__pa_symbol(&_text), |
| __pa_symbol(&_end) - __pa_symbol(&_text)); |
| |
| /* max_low_pfn is not a number of pages but the end pfn of low mem */ |
| |
| #ifdef CONFIG_MIPS_AUTO_PFN_OFFSET |
| ARCH_PFN_OFFSET = PFN_UP(ramstart); |
| #else |
| /* |
| * Reserve any memory between the start of RAM and PHYS_OFFSET |
| */ |
| if (ramstart > PHYS_OFFSET) |
| memblock_reserve(PHYS_OFFSET, ramstart - PHYS_OFFSET); |
| |
| if (PFN_UP(ramstart) > ARCH_PFN_OFFSET) { |
| pr_info("Wasting %lu bytes for tracking %lu unused pages\n", |
| (unsigned long)((PFN_UP(ramstart) - ARCH_PFN_OFFSET) * sizeof(struct page)), |
| (unsigned long)(PFN_UP(ramstart) - ARCH_PFN_OFFSET)); |
| } |
| #endif |
| |
| min_low_pfn = ARCH_PFN_OFFSET; |
| max_pfn = PFN_DOWN(ramend); |
| for_each_mem_pfn_range(i, MAX_NUMNODES, &start, &end, NULL) { |
| /* |
| * Skip highmem here so we get an accurate max_low_pfn if low |
| * memory stops short of high memory. |
| * If the region overlaps HIGHMEM_START, end is clipped so |
| * max_pfn excludes the highmem portion. |
| */ |
| if (start >= PFN_DOWN(HIGHMEM_START)) |
| continue; |
| if (end > PFN_DOWN(HIGHMEM_START)) |
| end = PFN_DOWN(HIGHMEM_START); |
| if (end > max_low_pfn) |
| max_low_pfn = end; |
| } |
| |
| if (min_low_pfn >= max_low_pfn) |
| panic("Incorrect memory mapping !!!"); |
| |
| if (max_pfn > PFN_DOWN(HIGHMEM_START)) { |
| #ifdef CONFIG_HIGHMEM |
| highstart_pfn = PFN_DOWN(HIGHMEM_START); |
| highend_pfn = max_pfn; |
| #else |
| max_low_pfn = PFN_DOWN(HIGHMEM_START); |
| max_pfn = max_low_pfn; |
| #endif |
| } |
| |
| /* |
| * Reserve initrd memory if needed. |
| */ |
| finalize_initrd(); |
| } |
| |
| #endif /* CONFIG_SGI_IP27 */ |
| |
| static int usermem __initdata; |
| |
| static int __init early_parse_mem(char *p) |
| { |
| phys_addr_t start, size; |
| |
| /* |
| * If a user specifies memory size, we |
| * blow away any automatically generated |
| * size. |
| */ |
| if (usermem == 0) { |
| usermem = 1; |
| memblock_remove(memblock_start_of_DRAM(), |
| memblock_end_of_DRAM() - memblock_start_of_DRAM()); |
| } |
| start = 0; |
| size = memparse(p, &p); |
| if (*p == '@') |
| start = memparse(p + 1, &p); |
| |
| memblock_add(start, size); |
| |
| return 0; |
| } |
| early_param("mem", early_parse_mem); |
| |
| static int __init early_parse_memmap(char *p) |
| { |
| char *oldp; |
| u64 start_at, mem_size; |
| |
| if (!p) |
| return -EINVAL; |
| |
| if (!strncmp(p, "exactmap", 8)) { |
| pr_err("\"memmap=exactmap\" invalid on MIPS\n"); |
| return 0; |
| } |
| |
| oldp = p; |
| mem_size = memparse(p, &p); |
| if (p == oldp) |
| return -EINVAL; |
| |
| if (*p == '@') { |
| start_at = memparse(p+1, &p); |
| memblock_add(start_at, mem_size); |
| } else if (*p == '#') { |
| pr_err("\"memmap=nn#ss\" (force ACPI data) invalid on MIPS\n"); |
| return -EINVAL; |
| } else if (*p == '$') { |
| start_at = memparse(p+1, &p); |
| memblock_add(start_at, mem_size); |
| memblock_reserve(start_at, mem_size); |
| } else { |
| pr_err("\"memmap\" invalid format!\n"); |
| return -EINVAL; |
| } |
| |
| if (*p == '\0') { |
| usermem = 1; |
| return 0; |
| } else |
| return -EINVAL; |
| } |
| early_param("memmap", early_parse_memmap); |
| |
| #ifdef CONFIG_PROC_VMCORE |
| static unsigned long setup_elfcorehdr, setup_elfcorehdr_size; |
| static int __init early_parse_elfcorehdr(char *p) |
| { |
| phys_addr_t start, end; |
| u64 i; |
| |
| setup_elfcorehdr = memparse(p, &p); |
| |
| for_each_mem_range(i, &start, &end) { |
| if (setup_elfcorehdr >= start && setup_elfcorehdr < end) { |
| /* |
| * Reserve from the elf core header to the end of |
| * the memory segment, that should all be kdump |
| * reserved memory. |
| */ |
| setup_elfcorehdr_size = end - setup_elfcorehdr; |
| break; |
| } |
| } |
| /* |
| * If we don't find it in the memory map, then we shouldn't |
| * have to worry about it, as the new kernel won't use it. |
| */ |
| return 0; |
| } |
| early_param("elfcorehdr", early_parse_elfcorehdr); |
| #endif |
| |
| #ifdef CONFIG_KEXEC |
| |
| /* 64M alignment for crash kernel regions */ |
| #define CRASH_ALIGN SZ_64M |
| #define CRASH_ADDR_MAX SZ_512M |
| |
| static void __init mips_parse_crashkernel(void) |
| { |
| unsigned long long total_mem; |
| unsigned long long crash_size, crash_base; |
| int ret; |
| |
| total_mem = memblock_phys_mem_size(); |
| ret = parse_crashkernel(boot_command_line, total_mem, |
| &crash_size, &crash_base); |
| if (ret != 0 || crash_size <= 0) |
| return; |
| |
| if (crash_base <= 0) { |
| crash_base = memblock_find_in_range(CRASH_ALIGN, CRASH_ADDR_MAX, |
| crash_size, CRASH_ALIGN); |
| if (!crash_base) { |
| pr_warn("crashkernel reservation failed - No suitable area found.\n"); |
| return; |
| } |
| } else { |
| unsigned long long start; |
| |
| start = memblock_find_in_range(crash_base, crash_base + crash_size, |
| crash_size, 1); |
| if (start != crash_base) { |
| pr_warn("Invalid memory region reserved for crash kernel\n"); |
| return; |
| } |
| } |
| |
| crashk_res.start = crash_base; |
| crashk_res.end = crash_base + crash_size - 1; |
| } |
| |
| static void __init request_crashkernel(struct resource *res) |
| { |
| int ret; |
| |
| if (crashk_res.start == crashk_res.end) |
| return; |
| |
| ret = request_resource(res, &crashk_res); |
| if (!ret) |
| pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n", |
| (unsigned long)(resource_size(&crashk_res) >> 20), |
| (unsigned long)(crashk_res.start >> 20)); |
| } |
| #else /* !defined(CONFIG_KEXEC) */ |
| static void __init mips_parse_crashkernel(void) |
| { |
| } |
| |
| static void __init request_crashkernel(struct resource *res) |
| { |
| } |
| #endif /* !defined(CONFIG_KEXEC) */ |
| |
| static void __init check_kernel_sections_mem(void) |
| { |
| phys_addr_t start = __pa_symbol(&_text); |
| phys_addr_t size = __pa_symbol(&_end) - start; |
| |
| if (!memblock_is_region_memory(start, size)) { |
| pr_info("Kernel sections are not in the memory maps\n"); |
| memblock_add(start, size); |
| } |
| } |
| |
| static void __init bootcmdline_append(const char *s, size_t max) |
| { |
| if (!s[0] || !max) |
| return; |
| |
| if (boot_command_line[0]) |
| strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); |
| |
| strlcat(boot_command_line, s, max); |
| } |
| |
| #ifdef CONFIG_OF_EARLY_FLATTREE |
| |
| static int __init bootcmdline_scan_chosen(unsigned long node, const char *uname, |
| int depth, void *data) |
| { |
| bool *dt_bootargs = data; |
| const char *p; |
| int l; |
| |
| if (depth != 1 || !data || |
| (strcmp(uname, "chosen") != 0 && strcmp(uname, "chosen@0") != 0)) |
| return 0; |
| |
| p = of_get_flat_dt_prop(node, "bootargs", &l); |
| if (p != NULL && l > 0) { |
| bootcmdline_append(p, min(l, COMMAND_LINE_SIZE)); |
| *dt_bootargs = true; |
| } |
| |
| return 1; |
| } |
| |
| #endif /* CONFIG_OF_EARLY_FLATTREE */ |
| |
| static void __init bootcmdline_init(void) |
| { |
| bool dt_bootargs = false; |
| |
| /* |
| * If CMDLINE_OVERRIDE is enabled then initializing the command line is |
| * trivial - we simply use the built-in command line unconditionally & |
| * unmodified. |
| */ |
| if (IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) { |
| strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); |
| return; |
| } |
| |
| /* |
| * If the user specified a built-in command line & |
| * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is |
| * prepended to arguments from the bootloader or DT so we'll copy them |
| * to the start of boot_command_line here. Otherwise, empty |
| * boot_command_line to undo anything early_init_dt_scan_chosen() did. |
| */ |
| if (IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)) |
| strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); |
| else |
| boot_command_line[0] = 0; |
| |
| #ifdef CONFIG_OF_EARLY_FLATTREE |
| /* |
| * If we're configured to take boot arguments from DT, look for those |
| * now. |
| */ |
| if (IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB) || |
| IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND)) |
| of_scan_flat_dt(bootcmdline_scan_chosen, &dt_bootargs); |
| #endif |
| |
| /* |
| * If we didn't get any arguments from DT (regardless of whether that's |
| * because we weren't configured to look for them, or because we looked |
| * & found none) then we'll take arguments from the bootloader. |
| * plat_mem_setup() should have filled arcs_cmdline with arguments from |
| * the bootloader. |
| */ |
| if (IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) || !dt_bootargs) |
| bootcmdline_append(arcs_cmdline, COMMAND_LINE_SIZE); |
| |
| /* |
| * If the user specified a built-in command line & we didn't already |
| * prepend it, we append it to boot_command_line here. |
| */ |
| if (IS_ENABLED(CONFIG_CMDLINE_BOOL) && |
| !IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND)) |
| bootcmdline_append(builtin_cmdline, COMMAND_LINE_SIZE); |
| } |
| |
| /* |
| * arch_mem_init - initialize memory management subsystem |
| * |
| * o plat_mem_setup() detects the memory configuration and will record detected |
| * memory areas using memblock_add. |
| * |
| * At this stage the memory configuration of the system is known to the |
| * kernel but generic memory management system is still entirely uninitialized. |
| * |
| * o bootmem_init() |
| * o sparse_init() |
| * o paging_init() |
| * o dma_contiguous_reserve() |
| * |
| * At this stage the bootmem allocator is ready to use. |
| * |
| * NOTE: historically plat_mem_setup did the entire platform initialization. |
| * This was rather impractical because it meant plat_mem_setup had to |
| * get away without any kind of memory allocator. To keep old code from |
| * breaking plat_setup was just renamed to plat_mem_setup and a second platform |
| * initialization hook for anything else was introduced. |
| */ |
| static void __init arch_mem_init(char **cmdline_p) |
| { |
| /* call board setup routine */ |
| plat_mem_setup(); |
| memblock_set_bottom_up(true); |
| |
| bootcmdline_init(); |
| strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); |
| *cmdline_p = command_line; |
| |
| parse_early_param(); |
| |
| if (usermem) |
| pr_info("User-defined physical RAM map overwrite\n"); |
| |
| check_kernel_sections_mem(); |
| |
| early_init_fdt_reserve_self(); |
| early_init_fdt_scan_reserved_mem(); |
| |
| #ifndef CONFIG_NUMA |
| memblock_set_node(0, PHYS_ADDR_MAX, &memblock.memory, 0); |
| #endif |
| bootmem_init(); |
| |
| /* |
| * Prevent memblock from allocating high memory. |
| * This cannot be done before max_low_pfn is detected, so up |
| * to this point is possible to only reserve physical memory |
| * with memblock_reserve; memblock_alloc* can be used |
| * only after this point |
| */ |
| memblock_set_current_limit(PFN_PHYS(max_low_pfn)); |
| |
| #ifdef CONFIG_PROC_VMCORE |
| if (setup_elfcorehdr && setup_elfcorehdr_size) { |
| printk(KERN_INFO "kdump reserved memory at %lx-%lx\n", |
| setup_elfcorehdr, setup_elfcorehdr_size); |
| memblock_reserve(setup_elfcorehdr, setup_elfcorehdr_size); |
| } |
| #endif |
| |
| mips_parse_crashkernel(); |
| #ifdef CONFIG_KEXEC |
| if (crashk_res.start != crashk_res.end) |
| memblock_reserve(crashk_res.start, resource_size(&crashk_res)); |
| #endif |
| device_tree_init(); |
| |
| /* |
| * In order to reduce the possibility of kernel panic when failed to |
| * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate |
| * low memory as small as possible before plat_swiotlb_setup(), so |
| * make sparse_init() using top-down allocation. |
| */ |
| memblock_set_bottom_up(false); |
| sparse_init(); |
| memblock_set_bottom_up(true); |
| |
| plat_swiotlb_setup(); |
| |
| dma_contiguous_reserve(PFN_PHYS(max_low_pfn)); |
| |
| /* Reserve for hibernation. */ |
| memblock_reserve(__pa_symbol(&__nosave_begin), |
| __pa_symbol(&__nosave_end) - __pa_symbol(&__nosave_begin)); |
| |
| fdt_init_reserved_mem(); |
| |
| early_memtest(PFN_PHYS(ARCH_PFN_OFFSET), PFN_PHYS(max_low_pfn)); |
| } |
| |
| static void __init resource_init(void) |
| { |
| phys_addr_t start, end; |
| u64 i; |
| |
| if (UNCAC_BASE != IO_BASE) |
| return; |
| |
| code_resource.start = __pa_symbol(&_text); |
| code_resource.end = __pa_symbol(&_etext) - 1; |
| data_resource.start = __pa_symbol(&_etext); |
| data_resource.end = __pa_symbol(&_edata) - 1; |
| bss_resource.start = __pa_symbol(&__bss_start); |
| bss_resource.end = __pa_symbol(&__bss_stop) - 1; |
| |
| for_each_mem_range(i, &start, &end) { |
| struct resource *res; |
| |
| res = memblock_alloc(sizeof(struct resource), SMP_CACHE_BYTES); |
| if (!res) |
| panic("%s: Failed to allocate %zu bytes\n", __func__, |
| sizeof(struct resource)); |
| |
| res->start = start; |
| /* |
| * In memblock, end points to the first byte after the |
| * range while in resourses, end points to the last byte in |
| * the range. |
| */ |
| res->end = end - 1; |
| res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY; |
| res->name = "System RAM"; |
| |
| request_resource(&iomem_resource, res); |
| |
| /* |
| * We don't know which RAM region contains kernel data, |
| * so we try it repeatedly and let the resource manager |
| * test it. |
| */ |
| request_resource(res, &code_resource); |
| request_resource(res, &data_resource); |
| request_resource(res, &bss_resource); |
| request_crashkernel(res); |
| } |
| } |
| |
| #ifdef CONFIG_SMP |
| static void __init prefill_possible_map(void) |
| { |
| int i, possible = num_possible_cpus(); |
| |
| if (possible > nr_cpu_ids) |
| possible = nr_cpu_ids; |
| |
| for (i = 0; i < possible; i++) |
| set_cpu_possible(i, true); |
| for (; i < NR_CPUS; i++) |
| set_cpu_possible(i, false); |
| |
| nr_cpu_ids = possible; |
| } |
| #else |
| static inline void prefill_possible_map(void) {} |
| #endif |
| |
| void __init setup_arch(char **cmdline_p) |
| { |
| cpu_probe(); |
| mips_cm_probe(); |
| prom_init(); |
| |
| setup_early_fdc_console(); |
| #ifdef CONFIG_EARLY_PRINTK |
| setup_early_printk(); |
| #endif |
| cpu_report(); |
| check_bugs_early(); |
| |
| #if defined(CONFIG_VT) |
| #if defined(CONFIG_VGA_CONSOLE) |
| conswitchp = &vga_con; |
| #endif |
| #endif |
| |
| arch_mem_init(cmdline_p); |
| dmi_setup(); |
| |
| resource_init(); |
| plat_smp_setup(); |
| prefill_possible_map(); |
| |
| cpu_cache_init(); |
| paging_init(); |
| |
| memblock_dump_all(); |
| } |
| |
| unsigned long kernelsp[NR_CPUS]; |
| unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3; |
| |
| #ifdef CONFIG_USE_OF |
| unsigned long fw_passed_dtb; |
| #endif |
| |
| #ifdef CONFIG_DEBUG_FS |
| struct dentry *mips_debugfs_dir; |
| static int __init debugfs_mips(void) |
| { |
| mips_debugfs_dir = debugfs_create_dir("mips", NULL); |
| return 0; |
| } |
| arch_initcall(debugfs_mips); |
| #endif |
| |
| #ifdef CONFIG_DMA_MAYBE_COHERENT |
| /* User defined DMA coherency from command line. */ |
| enum coherent_io_user_state coherentio = IO_COHERENCE_DEFAULT; |
| EXPORT_SYMBOL_GPL(coherentio); |
| int hw_coherentio; /* Actual hardware supported DMA coherency setting. */ |
| |
| static int __init setcoherentio(char *str) |
| { |
| coherentio = IO_COHERENCE_ENABLED; |
| pr_info("Hardware DMA cache coherency (command line)\n"); |
| return 0; |
| } |
| early_param("coherentio", setcoherentio); |
| |
| static int __init setnocoherentio(char *str) |
| { |
| coherentio = IO_COHERENCE_DISABLED; |
| pr_info("Software DMA cache coherency (command line)\n"); |
| return 0; |
| } |
| early_param("nocoherentio", setnocoherentio); |
| #endif |