| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * kxsd9.c simple support for the Kionix KXSD9 3D |
| * accelerometer. |
| * |
| * Copyright (c) 2008-2009 Jonathan Cameron <jic23@kernel.org> |
| * |
| * The i2c interface is very similar, so shouldn't be a problem once |
| * I have a suitable wire made up. |
| * |
| * TODO: Support the motion detector |
| */ |
| |
| #include <linux/device.h> |
| #include <linux/kernel.h> |
| #include <linux/sysfs.h> |
| #include <linux/slab.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/iio/iio.h> |
| #include <linux/iio/sysfs.h> |
| #include <linux/iio/buffer.h> |
| #include <linux/iio/triggered_buffer.h> |
| #include <linux/iio/trigger_consumer.h> |
| |
| #include "kxsd9.h" |
| |
| #define KXSD9_REG_X 0x00 |
| #define KXSD9_REG_Y 0x02 |
| #define KXSD9_REG_Z 0x04 |
| #define KXSD9_REG_AUX 0x06 |
| #define KXSD9_REG_RESET 0x0a |
| #define KXSD9_REG_CTRL_C 0x0c |
| |
| #define KXSD9_CTRL_C_FS_MASK 0x03 |
| #define KXSD9_CTRL_C_FS_8G 0x00 |
| #define KXSD9_CTRL_C_FS_6G 0x01 |
| #define KXSD9_CTRL_C_FS_4G 0x02 |
| #define KXSD9_CTRL_C_FS_2G 0x03 |
| #define KXSD9_CTRL_C_MOT_LAT BIT(3) |
| #define KXSD9_CTRL_C_MOT_LEV BIT(4) |
| #define KXSD9_CTRL_C_LP_MASK 0xe0 |
| #define KXSD9_CTRL_C_LP_NONE 0x00 |
| #define KXSD9_CTRL_C_LP_2000HZC BIT(5) |
| #define KXSD9_CTRL_C_LP_2000HZB BIT(6) |
| #define KXSD9_CTRL_C_LP_2000HZA (BIT(5)|BIT(6)) |
| #define KXSD9_CTRL_C_LP_1000HZ BIT(7) |
| #define KXSD9_CTRL_C_LP_500HZ (BIT(7)|BIT(5)) |
| #define KXSD9_CTRL_C_LP_100HZ (BIT(7)|BIT(6)) |
| #define KXSD9_CTRL_C_LP_50HZ (BIT(7)|BIT(6)|BIT(5)) |
| |
| #define KXSD9_REG_CTRL_B 0x0d |
| |
| #define KXSD9_CTRL_B_CLK_HLD BIT(7) |
| #define KXSD9_CTRL_B_ENABLE BIT(6) |
| #define KXSD9_CTRL_B_ST BIT(5) /* Self-test */ |
| |
| #define KXSD9_REG_CTRL_A 0x0e |
| |
| /** |
| * struct kxsd9_state - device related storage |
| * @dev: pointer to the parent device |
| * @map: regmap to the device |
| * @orientation: mounting matrix, flipped axis etc |
| * @regs: regulators for this device, VDD and IOVDD |
| * @scale: the current scaling setting |
| */ |
| struct kxsd9_state { |
| struct device *dev; |
| struct regmap *map; |
| struct iio_mount_matrix orientation; |
| struct regulator_bulk_data regs[2]; |
| u8 scale; |
| }; |
| |
| #define KXSD9_SCALE_2G "0.011978" |
| #define KXSD9_SCALE_4G "0.023927" |
| #define KXSD9_SCALE_6G "0.035934" |
| #define KXSD9_SCALE_8G "0.047853" |
| |
| /* reverse order */ |
| static const int kxsd9_micro_scales[4] = { 47853, 35934, 23927, 11978 }; |
| |
| #define KXSD9_ZERO_G_OFFSET -2048 |
| |
| /* |
| * Regulator names |
| */ |
| static const char kxsd9_reg_vdd[] = "vdd"; |
| static const char kxsd9_reg_iovdd[] = "iovdd"; |
| |
| static int kxsd9_write_scale(struct iio_dev *indio_dev, int micro) |
| { |
| int ret, i; |
| struct kxsd9_state *st = iio_priv(indio_dev); |
| bool foundit = false; |
| |
| for (i = 0; i < 4; i++) |
| if (micro == kxsd9_micro_scales[i]) { |
| foundit = true; |
| break; |
| } |
| if (!foundit) |
| return -EINVAL; |
| |
| ret = regmap_update_bits(st->map, |
| KXSD9_REG_CTRL_C, |
| KXSD9_CTRL_C_FS_MASK, |
| i); |
| if (ret < 0) |
| goto error_ret; |
| |
| /* Cached scale when the sensor is powered down */ |
| st->scale = i; |
| |
| error_ret: |
| return ret; |
| } |
| |
| static IIO_CONST_ATTR(accel_scale_available, |
| KXSD9_SCALE_2G " " |
| KXSD9_SCALE_4G " " |
| KXSD9_SCALE_6G " " |
| KXSD9_SCALE_8G); |
| |
| static struct attribute *kxsd9_attributes[] = { |
| &iio_const_attr_accel_scale_available.dev_attr.attr, |
| NULL, |
| }; |
| |
| static int kxsd9_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int val, |
| int val2, |
| long mask) |
| { |
| int ret = -EINVAL; |
| struct kxsd9_state *st = iio_priv(indio_dev); |
| |
| pm_runtime_get_sync(st->dev); |
| |
| if (mask == IIO_CHAN_INFO_SCALE) { |
| /* Check no integer component */ |
| if (val) |
| return -EINVAL; |
| ret = kxsd9_write_scale(indio_dev, val2); |
| } |
| |
| pm_runtime_mark_last_busy(st->dev); |
| pm_runtime_put_autosuspend(st->dev); |
| |
| return ret; |
| } |
| |
| static int kxsd9_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| int *val, int *val2, long mask) |
| { |
| int ret = -EINVAL; |
| struct kxsd9_state *st = iio_priv(indio_dev); |
| unsigned int regval; |
| __be16 raw_val; |
| u16 nval; |
| |
| pm_runtime_get_sync(st->dev); |
| |
| switch (mask) { |
| case IIO_CHAN_INFO_RAW: |
| ret = regmap_bulk_read(st->map, chan->address, &raw_val, |
| sizeof(raw_val)); |
| if (ret) |
| goto error_ret; |
| nval = be16_to_cpu(raw_val); |
| /* Only 12 bits are valid */ |
| nval >>= 4; |
| *val = nval; |
| ret = IIO_VAL_INT; |
| break; |
| case IIO_CHAN_INFO_OFFSET: |
| /* This has a bias of -2048 */ |
| *val = KXSD9_ZERO_G_OFFSET; |
| ret = IIO_VAL_INT; |
| break; |
| case IIO_CHAN_INFO_SCALE: |
| ret = regmap_read(st->map, |
| KXSD9_REG_CTRL_C, |
| ®val); |
| if (ret < 0) |
| goto error_ret; |
| *val = 0; |
| *val2 = kxsd9_micro_scales[regval & KXSD9_CTRL_C_FS_MASK]; |
| ret = IIO_VAL_INT_PLUS_MICRO; |
| break; |
| } |
| |
| error_ret: |
| pm_runtime_mark_last_busy(st->dev); |
| pm_runtime_put_autosuspend(st->dev); |
| |
| return ret; |
| }; |
| |
| static irqreturn_t kxsd9_trigger_handler(int irq, void *p) |
| { |
| const struct iio_poll_func *pf = p; |
| struct iio_dev *indio_dev = pf->indio_dev; |
| struct kxsd9_state *st = iio_priv(indio_dev); |
| /* |
| * Ensure correct positioning and alignment of timestamp. |
| * No need to zero initialize as all elements written. |
| */ |
| struct { |
| __be16 chan[4]; |
| s64 ts __aligned(8); |
| } hw_values; |
| int ret; |
| |
| ret = regmap_bulk_read(st->map, |
| KXSD9_REG_X, |
| hw_values.chan, |
| sizeof(hw_values.chan)); |
| if (ret) { |
| dev_err(st->dev, |
| "error reading data\n"); |
| return ret; |
| } |
| |
| iio_push_to_buffers_with_timestamp(indio_dev, |
| &hw_values, |
| iio_get_time_ns(indio_dev)); |
| iio_trigger_notify_done(indio_dev->trig); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int kxsd9_buffer_preenable(struct iio_dev *indio_dev) |
| { |
| struct kxsd9_state *st = iio_priv(indio_dev); |
| |
| pm_runtime_get_sync(st->dev); |
| |
| return 0; |
| } |
| |
| static int kxsd9_buffer_postdisable(struct iio_dev *indio_dev) |
| { |
| struct kxsd9_state *st = iio_priv(indio_dev); |
| |
| pm_runtime_mark_last_busy(st->dev); |
| pm_runtime_put_autosuspend(st->dev); |
| |
| return 0; |
| } |
| |
| static const struct iio_buffer_setup_ops kxsd9_buffer_setup_ops = { |
| .preenable = kxsd9_buffer_preenable, |
| .postdisable = kxsd9_buffer_postdisable, |
| }; |
| |
| static const struct iio_mount_matrix * |
| kxsd9_get_mount_matrix(const struct iio_dev *indio_dev, |
| const struct iio_chan_spec *chan) |
| { |
| struct kxsd9_state *st = iio_priv(indio_dev); |
| |
| return &st->orientation; |
| } |
| |
| static const struct iio_chan_spec_ext_info kxsd9_ext_info[] = { |
| IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, kxsd9_get_mount_matrix), |
| { }, |
| }; |
| |
| #define KXSD9_ACCEL_CHAN(axis, index) \ |
| { \ |
| .type = IIO_ACCEL, \ |
| .modified = 1, \ |
| .channel2 = IIO_MOD_##axis, \ |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ |
| .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ |
| BIT(IIO_CHAN_INFO_OFFSET), \ |
| .ext_info = kxsd9_ext_info, \ |
| .address = KXSD9_REG_##axis, \ |
| .scan_index = index, \ |
| .scan_type = { \ |
| .sign = 'u', \ |
| .realbits = 12, \ |
| .storagebits = 16, \ |
| .shift = 4, \ |
| .endianness = IIO_BE, \ |
| }, \ |
| } |
| |
| static const struct iio_chan_spec kxsd9_channels[] = { |
| KXSD9_ACCEL_CHAN(X, 0), |
| KXSD9_ACCEL_CHAN(Y, 1), |
| KXSD9_ACCEL_CHAN(Z, 2), |
| { |
| .type = IIO_VOLTAGE, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), |
| .indexed = 1, |
| .address = KXSD9_REG_AUX, |
| .scan_index = 3, |
| .scan_type = { |
| .sign = 'u', |
| .realbits = 12, |
| .storagebits = 16, |
| .shift = 4, |
| .endianness = IIO_BE, |
| }, |
| }, |
| IIO_CHAN_SOFT_TIMESTAMP(4), |
| }; |
| |
| static const struct attribute_group kxsd9_attribute_group = { |
| .attrs = kxsd9_attributes, |
| }; |
| |
| static int kxsd9_power_up(struct kxsd9_state *st) |
| { |
| int ret; |
| |
| /* Enable the regulators */ |
| ret = regulator_bulk_enable(ARRAY_SIZE(st->regs), st->regs); |
| if (ret) { |
| dev_err(st->dev, "Cannot enable regulators\n"); |
| return ret; |
| } |
| |
| /* Power up */ |
| ret = regmap_write(st->map, |
| KXSD9_REG_CTRL_B, |
| KXSD9_CTRL_B_ENABLE); |
| if (ret) |
| return ret; |
| |
| /* |
| * Set 1000Hz LPF, 2g fullscale, motion wakeup threshold 1g, |
| * latched wakeup |
| */ |
| ret = regmap_write(st->map, |
| KXSD9_REG_CTRL_C, |
| KXSD9_CTRL_C_LP_1000HZ | |
| KXSD9_CTRL_C_MOT_LEV | |
| KXSD9_CTRL_C_MOT_LAT | |
| st->scale); |
| if (ret) |
| return ret; |
| |
| /* |
| * Power-up time depends on the LPF setting, but typ 15.9 ms, let's |
| * set 20 ms to allow for some slack. |
| */ |
| msleep(20); |
| |
| return 0; |
| }; |
| |
| static int kxsd9_power_down(struct kxsd9_state *st) |
| { |
| int ret; |
| |
| /* |
| * Set into low power mode - since there may be more users of the |
| * regulators this is the first step of the power saving: it will |
| * make sure we conserve power even if there are others users on the |
| * regulators. |
| */ |
| ret = regmap_update_bits(st->map, |
| KXSD9_REG_CTRL_B, |
| KXSD9_CTRL_B_ENABLE, |
| 0); |
| if (ret) |
| return ret; |
| |
| /* Disable the regulators */ |
| ret = regulator_bulk_disable(ARRAY_SIZE(st->regs), st->regs); |
| if (ret) { |
| dev_err(st->dev, "Cannot disable regulators\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct iio_info kxsd9_info = { |
| .read_raw = &kxsd9_read_raw, |
| .write_raw = &kxsd9_write_raw, |
| .attrs = &kxsd9_attribute_group, |
| }; |
| |
| /* Four channels apart from timestamp, scan mask = 0x0f */ |
| static const unsigned long kxsd9_scan_masks[] = { 0xf, 0 }; |
| |
| int kxsd9_common_probe(struct device *dev, |
| struct regmap *map, |
| const char *name) |
| { |
| struct iio_dev *indio_dev; |
| struct kxsd9_state *st; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| st = iio_priv(indio_dev); |
| st->dev = dev; |
| st->map = map; |
| |
| indio_dev->channels = kxsd9_channels; |
| indio_dev->num_channels = ARRAY_SIZE(kxsd9_channels); |
| indio_dev->name = name; |
| indio_dev->info = &kxsd9_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->available_scan_masks = kxsd9_scan_masks; |
| |
| /* Read the mounting matrix, if present */ |
| ret = iio_read_mount_matrix(dev, "mount-matrix", &st->orientation); |
| if (ret) |
| return ret; |
| |
| /* Fetch and turn on regulators */ |
| st->regs[0].supply = kxsd9_reg_vdd; |
| st->regs[1].supply = kxsd9_reg_iovdd; |
| ret = devm_regulator_bulk_get(dev, |
| ARRAY_SIZE(st->regs), |
| st->regs); |
| if (ret) { |
| dev_err(dev, "Cannot get regulators\n"); |
| return ret; |
| } |
| /* Default scaling */ |
| st->scale = KXSD9_CTRL_C_FS_2G; |
| |
| kxsd9_power_up(st); |
| |
| ret = iio_triggered_buffer_setup(indio_dev, |
| iio_pollfunc_store_time, |
| kxsd9_trigger_handler, |
| &kxsd9_buffer_setup_ops); |
| if (ret) { |
| dev_err(dev, "triggered buffer setup failed\n"); |
| goto err_power_down; |
| } |
| |
| ret = iio_device_register(indio_dev); |
| if (ret) |
| goto err_cleanup_buffer; |
| |
| dev_set_drvdata(dev, indio_dev); |
| |
| /* Enable runtime PM */ |
| pm_runtime_get_noresume(dev); |
| pm_runtime_set_active(dev); |
| pm_runtime_enable(dev); |
| /* |
| * Set autosuspend to two orders of magnitude larger than the |
| * start-up time. 20ms start-up time means 2000ms autosuspend, |
| * i.e. 2 seconds. |
| */ |
| pm_runtime_set_autosuspend_delay(dev, 2000); |
| pm_runtime_use_autosuspend(dev); |
| pm_runtime_put(dev); |
| |
| return 0; |
| |
| err_cleanup_buffer: |
| iio_triggered_buffer_cleanup(indio_dev); |
| err_power_down: |
| kxsd9_power_down(st); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(kxsd9_common_probe); |
| |
| int kxsd9_common_remove(struct device *dev) |
| { |
| struct iio_dev *indio_dev = dev_get_drvdata(dev); |
| struct kxsd9_state *st = iio_priv(indio_dev); |
| |
| iio_triggered_buffer_cleanup(indio_dev); |
| iio_device_unregister(indio_dev); |
| pm_runtime_get_sync(dev); |
| pm_runtime_put_noidle(dev); |
| pm_runtime_disable(dev); |
| kxsd9_power_down(st); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL(kxsd9_common_remove); |
| |
| #ifdef CONFIG_PM |
| static int kxsd9_runtime_suspend(struct device *dev) |
| { |
| struct iio_dev *indio_dev = dev_get_drvdata(dev); |
| struct kxsd9_state *st = iio_priv(indio_dev); |
| |
| return kxsd9_power_down(st); |
| } |
| |
| static int kxsd9_runtime_resume(struct device *dev) |
| { |
| struct iio_dev *indio_dev = dev_get_drvdata(dev); |
| struct kxsd9_state *st = iio_priv(indio_dev); |
| |
| return kxsd9_power_up(st); |
| } |
| #endif /* CONFIG_PM */ |
| |
| const struct dev_pm_ops kxsd9_dev_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, |
| pm_runtime_force_resume) |
| SET_RUNTIME_PM_OPS(kxsd9_runtime_suspend, |
| kxsd9_runtime_resume, NULL) |
| }; |
| EXPORT_SYMBOL(kxsd9_dev_pm_ops); |
| |
| MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>"); |
| MODULE_DESCRIPTION("Kionix KXSD9 driver"); |
| MODULE_LICENSE("GPL v2"); |