| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * ff-transaction.c - a part of driver for RME Fireface series |
| * |
| * Copyright (c) 2015-2017 Takashi Sakamoto |
| */ |
| |
| #include "ff.h" |
| |
| static void finish_transmit_midi_msg(struct snd_ff *ff, unsigned int port, |
| int rcode) |
| { |
| struct snd_rawmidi_substream *substream = |
| READ_ONCE(ff->rx_midi_substreams[port]); |
| |
| if (rcode_is_permanent_error(rcode)) { |
| ff->rx_midi_error[port] = true; |
| return; |
| } |
| |
| if (rcode != RCODE_COMPLETE) { |
| /* Transfer the message again, immediately. */ |
| ff->next_ktime[port] = 0; |
| schedule_work(&ff->rx_midi_work[port]); |
| return; |
| } |
| |
| snd_rawmidi_transmit_ack(substream, ff->rx_bytes[port]); |
| ff->rx_bytes[port] = 0; |
| |
| if (!snd_rawmidi_transmit_empty(substream)) |
| schedule_work(&ff->rx_midi_work[port]); |
| } |
| |
| static void finish_transmit_midi0_msg(struct fw_card *card, int rcode, |
| void *data, size_t length, |
| void *callback_data) |
| { |
| struct snd_ff *ff = |
| container_of(callback_data, struct snd_ff, transactions[0]); |
| finish_transmit_midi_msg(ff, 0, rcode); |
| } |
| |
| static void finish_transmit_midi1_msg(struct fw_card *card, int rcode, |
| void *data, size_t length, |
| void *callback_data) |
| { |
| struct snd_ff *ff = |
| container_of(callback_data, struct snd_ff, transactions[1]); |
| finish_transmit_midi_msg(ff, 1, rcode); |
| } |
| |
| static void transmit_midi_msg(struct snd_ff *ff, unsigned int port) |
| { |
| struct snd_rawmidi_substream *substream = |
| READ_ONCE(ff->rx_midi_substreams[port]); |
| int quad_count; |
| |
| struct fw_device *fw_dev = fw_parent_device(ff->unit); |
| unsigned long long addr; |
| int generation; |
| fw_transaction_callback_t callback; |
| int tcode; |
| |
| if (substream == NULL || snd_rawmidi_transmit_empty(substream)) |
| return; |
| |
| if (ff->rx_bytes[port] > 0 || ff->rx_midi_error[port]) |
| return; |
| |
| /* Do it in next chance. */ |
| if (ktime_after(ff->next_ktime[port], ktime_get())) { |
| schedule_work(&ff->rx_midi_work[port]); |
| return; |
| } |
| |
| quad_count = ff->spec->protocol->fill_midi_msg(ff, substream, port); |
| if (quad_count <= 0) |
| return; |
| |
| if (port == 0) { |
| addr = ff->spec->midi_rx_addrs[0]; |
| callback = finish_transmit_midi0_msg; |
| } else { |
| addr = ff->spec->midi_rx_addrs[1]; |
| callback = finish_transmit_midi1_msg; |
| } |
| |
| /* Set interval to next transaction. */ |
| ff->next_ktime[port] = ktime_add_ns(ktime_get(), |
| ff->rx_bytes[port] * 8 * NSEC_PER_SEC / 31250); |
| |
| if (quad_count == 1) |
| tcode = TCODE_WRITE_QUADLET_REQUEST; |
| else |
| tcode = TCODE_WRITE_BLOCK_REQUEST; |
| |
| /* |
| * In Linux FireWire core, when generation is updated with memory |
| * barrier, node id has already been updated. In this module, After |
| * this smp_rmb(), load/store instructions to memory are completed. |
| * Thus, both of generation and node id are available with recent |
| * values. This is a light-serialization solution to handle bus reset |
| * events on IEEE 1394 bus. |
| */ |
| generation = fw_dev->generation; |
| smp_rmb(); |
| fw_send_request(fw_dev->card, &ff->transactions[port], tcode, |
| fw_dev->node_id, generation, fw_dev->max_speed, |
| addr, &ff->msg_buf[port], quad_count * 4, |
| callback, &ff->transactions[port]); |
| } |
| |
| static void transmit_midi0_msg(struct work_struct *work) |
| { |
| struct snd_ff *ff = container_of(work, struct snd_ff, rx_midi_work[0]); |
| |
| transmit_midi_msg(ff, 0); |
| } |
| |
| static void transmit_midi1_msg(struct work_struct *work) |
| { |
| struct snd_ff *ff = container_of(work, struct snd_ff, rx_midi_work[1]); |
| |
| transmit_midi_msg(ff, 1); |
| } |
| |
| static void handle_midi_msg(struct fw_card *card, struct fw_request *request, |
| int tcode, int destination, int source, |
| int generation, unsigned long long offset, |
| void *data, size_t length, void *callback_data) |
| { |
| struct snd_ff *ff = callback_data; |
| __le32 *buf = data; |
| |
| fw_send_response(card, request, RCODE_COMPLETE); |
| |
| offset -= ff->async_handler.offset; |
| ff->spec->protocol->handle_midi_msg(ff, (unsigned int)offset, buf, |
| length); |
| } |
| |
| static int allocate_own_address(struct snd_ff *ff, int i) |
| { |
| struct fw_address_region midi_msg_region; |
| int err; |
| |
| ff->async_handler.length = ff->spec->midi_addr_range; |
| ff->async_handler.address_callback = handle_midi_msg; |
| ff->async_handler.callback_data = ff; |
| |
| midi_msg_region.start = 0x000100000000ull * i; |
| midi_msg_region.end = midi_msg_region.start + ff->async_handler.length; |
| |
| err = fw_core_add_address_handler(&ff->async_handler, &midi_msg_region); |
| if (err >= 0) { |
| /* Controllers are allowed to register this region. */ |
| if (ff->async_handler.offset & 0x0000ffffffff) { |
| fw_core_remove_address_handler(&ff->async_handler); |
| err = -EAGAIN; |
| } |
| } |
| |
| return err; |
| } |
| |
| // Controllers are allowed to register higher 4 bytes of destination address to |
| // receive asynchronous transactions for MIDI messages, while the way to |
| // register lower 4 bytes of address is different depending on protocols. For |
| // details, please refer to comments in protocol implementations. |
| // |
| // This driver expects userspace applications to configure registers for the |
| // lower address because in most cases such registers has the other settings. |
| int snd_ff_transaction_reregister(struct snd_ff *ff) |
| { |
| struct fw_card *fw_card = fw_parent_device(ff->unit)->card; |
| u32 addr; |
| __le32 reg; |
| |
| /* |
| * Controllers are allowed to register its node ID and upper 2 byte of |
| * local address to listen asynchronous transactions. |
| */ |
| addr = (fw_card->node_id << 16) | (ff->async_handler.offset >> 32); |
| reg = cpu_to_le32(addr); |
| return snd_fw_transaction(ff->unit, TCODE_WRITE_QUADLET_REQUEST, |
| ff->spec->midi_high_addr, |
| ®, sizeof(reg), 0); |
| } |
| |
| int snd_ff_transaction_register(struct snd_ff *ff) |
| { |
| int i, err; |
| |
| /* |
| * Allocate in Memory Space of IEC 13213, but lower 4 byte in LSB should |
| * be zero due to device specification. |
| */ |
| for (i = 0; i < 0xffff; i++) { |
| err = allocate_own_address(ff, i); |
| if (err != -EBUSY && err != -EAGAIN) |
| break; |
| } |
| if (err < 0) |
| return err; |
| |
| err = snd_ff_transaction_reregister(ff); |
| if (err < 0) |
| return err; |
| |
| INIT_WORK(&ff->rx_midi_work[0], transmit_midi0_msg); |
| INIT_WORK(&ff->rx_midi_work[1], transmit_midi1_msg); |
| |
| return 0; |
| } |
| |
| void snd_ff_transaction_unregister(struct snd_ff *ff) |
| { |
| __le32 reg; |
| |
| if (ff->async_handler.callback_data == NULL) |
| return; |
| ff->async_handler.callback_data = NULL; |
| |
| /* Release higher 4 bytes of address. */ |
| reg = cpu_to_le32(0x00000000); |
| snd_fw_transaction(ff->unit, TCODE_WRITE_QUADLET_REQUEST, |
| ff->spec->midi_high_addr, |
| ®, sizeof(reg), 0); |
| |
| fw_core_remove_address_handler(&ff->async_handler); |
| } |