| /* |
| Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and |
| Philip Edelbrock <phil@netroedge.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| /* |
| Supports: |
| Intel PIIX4, 440MX |
| Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100 |
| ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800 |
| AMD Hudson-2 |
| SMSC Victory66 |
| |
| Note: we assume there can only be one device, with one or more |
| SMBus interfaces. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/pci.h> |
| #include <linux/kernel.h> |
| #include <linux/delay.h> |
| #include <linux/stddef.h> |
| #include <linux/ioport.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/init.h> |
| #include <linux/dmi.h> |
| #include <linux/acpi.h> |
| #include <linux/io.h> |
| |
| |
| /* PIIX4 SMBus address offsets */ |
| #define SMBHSTSTS (0 + piix4_smba) |
| #define SMBHSLVSTS (1 + piix4_smba) |
| #define SMBHSTCNT (2 + piix4_smba) |
| #define SMBHSTCMD (3 + piix4_smba) |
| #define SMBHSTADD (4 + piix4_smba) |
| #define SMBHSTDAT0 (5 + piix4_smba) |
| #define SMBHSTDAT1 (6 + piix4_smba) |
| #define SMBBLKDAT (7 + piix4_smba) |
| #define SMBSLVCNT (8 + piix4_smba) |
| #define SMBSHDWCMD (9 + piix4_smba) |
| #define SMBSLVEVT (0xA + piix4_smba) |
| #define SMBSLVDAT (0xC + piix4_smba) |
| |
| /* count for request_region */ |
| #define SMBIOSIZE 8 |
| |
| /* PCI Address Constants */ |
| #define SMBBA 0x090 |
| #define SMBHSTCFG 0x0D2 |
| #define SMBSLVC 0x0D3 |
| #define SMBSHDW1 0x0D4 |
| #define SMBSHDW2 0x0D5 |
| #define SMBREV 0x0D6 |
| |
| /* Other settings */ |
| #define MAX_TIMEOUT 500 |
| #define ENABLE_INT9 0 |
| |
| /* PIIX4 constants */ |
| #define PIIX4_QUICK 0x00 |
| #define PIIX4_BYTE 0x04 |
| #define PIIX4_BYTE_DATA 0x08 |
| #define PIIX4_WORD_DATA 0x0C |
| #define PIIX4_BLOCK_DATA 0x14 |
| |
| /* insmod parameters */ |
| |
| /* If force is set to anything different from 0, we forcibly enable the |
| PIIX4. DANGEROUS! */ |
| static int force; |
| module_param (force, int, 0); |
| MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!"); |
| |
| /* If force_addr is set to anything different from 0, we forcibly enable |
| the PIIX4 at the given address. VERY DANGEROUS! */ |
| static int force_addr; |
| module_param (force_addr, int, 0); |
| MODULE_PARM_DESC(force_addr, |
| "Forcibly enable the PIIX4 at the given address. " |
| "EXTREMELY DANGEROUS!"); |
| |
| static int srvrworks_csb5_delay; |
| static struct pci_driver piix4_driver; |
| |
| static struct dmi_system_id __devinitdata piix4_dmi_blacklist[] = { |
| { |
| .ident = "Sapphire AM2RD790", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "SAPPHIRE Inc."), |
| DMI_MATCH(DMI_BOARD_NAME, "PC-AM2RD790"), |
| }, |
| }, |
| { |
| .ident = "DFI Lanparty UT 790FX", |
| .matches = { |
| DMI_MATCH(DMI_BOARD_VENDOR, "DFI Inc."), |
| DMI_MATCH(DMI_BOARD_NAME, "LP UT 790FX"), |
| }, |
| }, |
| { } |
| }; |
| |
| /* The IBM entry is in a separate table because we only check it |
| on Intel-based systems */ |
| static struct dmi_system_id __devinitdata piix4_dmi_ibm[] = { |
| { |
| .ident = "IBM", |
| .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), }, |
| }, |
| { }, |
| }; |
| |
| struct i2c_piix4_adapdata { |
| unsigned short smba; |
| }; |
| |
| static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, |
| const struct pci_device_id *id) |
| { |
| unsigned char temp; |
| unsigned short piix4_smba; |
| |
| if ((PIIX4_dev->vendor == PCI_VENDOR_ID_SERVERWORKS) && |
| (PIIX4_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5)) |
| srvrworks_csb5_delay = 1; |
| |
| /* On some motherboards, it was reported that accessing the SMBus |
| caused severe hardware problems */ |
| if (dmi_check_system(piix4_dmi_blacklist)) { |
| dev_err(&PIIX4_dev->dev, |
| "Accessing the SMBus on this system is unsafe!\n"); |
| return -EPERM; |
| } |
| |
| /* Don't access SMBus on IBM systems which get corrupted eeproms */ |
| if (dmi_check_system(piix4_dmi_ibm) && |
| PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) { |
| dev_err(&PIIX4_dev->dev, "IBM system detected; this module " |
| "may corrupt your serial eeprom! Refusing to load " |
| "module!\n"); |
| return -EPERM; |
| } |
| |
| /* Determine the address of the SMBus areas */ |
| if (force_addr) { |
| piix4_smba = force_addr & 0xfff0; |
| force = 0; |
| } else { |
| pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba); |
| piix4_smba &= 0xfff0; |
| if(piix4_smba == 0) { |
| dev_err(&PIIX4_dev->dev, "SMBus base address " |
| "uninitialized - upgrade BIOS or use " |
| "force_addr=0xaddr\n"); |
| return -ENODEV; |
| } |
| } |
| |
| if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) |
| return -ENODEV; |
| |
| if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { |
| dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n", |
| piix4_smba); |
| return -EBUSY; |
| } |
| |
| pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp); |
| |
| /* If force_addr is set, we program the new address here. Just to make |
| sure, we disable the PIIX4 first. */ |
| if (force_addr) { |
| pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe); |
| pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba); |
| pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01); |
| dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to " |
| "new address %04x!\n", piix4_smba); |
| } else if ((temp & 1) == 0) { |
| if (force) { |
| /* This should never need to be done, but has been |
| * noted that many Dell machines have the SMBus |
| * interface on the PIIX4 disabled!? NOTE: This assumes |
| * I/O space and other allocations WERE done by the |
| * Bios! Don't complain if your hardware does weird |
| * things after enabling this. :') Check for Bios |
| * updates before resorting to this. |
| */ |
| pci_write_config_byte(PIIX4_dev, SMBHSTCFG, |
| temp | 1); |
| dev_notice(&PIIX4_dev->dev, |
| "WARNING: SMBus interface has been FORCEFULLY ENABLED!\n"); |
| } else { |
| dev_err(&PIIX4_dev->dev, |
| "Host SMBus controller not enabled!\n"); |
| release_region(piix4_smba, SMBIOSIZE); |
| return -ENODEV; |
| } |
| } |
| |
| if (((temp & 0x0E) == 8) || ((temp & 0x0E) == 2)) |
| dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n"); |
| else if ((temp & 0x0E) == 0) |
| dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n"); |
| else |
| dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration " |
| "(or code out of date)!\n"); |
| |
| pci_read_config_byte(PIIX4_dev, SMBREV, &temp); |
| dev_info(&PIIX4_dev->dev, |
| "SMBus Host Controller at 0x%x, revision %d\n", |
| piix4_smba, temp); |
| |
| return piix4_smba; |
| } |
| |
| static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev, |
| const struct pci_device_id *id) |
| { |
| unsigned short piix4_smba; |
| unsigned short smba_idx = 0xcd6; |
| u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c; |
| |
| /* SB800 and later SMBus does not support forcing address */ |
| if (force || force_addr) { |
| dev_err(&PIIX4_dev->dev, "SMBus does not support " |
| "forcing address!\n"); |
| return -EINVAL; |
| } |
| |
| /* Determine the address of the SMBus areas */ |
| if (!request_region(smba_idx, 2, "smba_idx")) { |
| dev_err(&PIIX4_dev->dev, "SMBus base address index region " |
| "0x%x already in use!\n", smba_idx); |
| return -EBUSY; |
| } |
| outb_p(smb_en, smba_idx); |
| smba_en_lo = inb_p(smba_idx + 1); |
| outb_p(smb_en + 1, smba_idx); |
| smba_en_hi = inb_p(smba_idx + 1); |
| release_region(smba_idx, 2); |
| |
| if ((smba_en_lo & 1) == 0) { |
| dev_err(&PIIX4_dev->dev, |
| "Host SMBus controller not enabled!\n"); |
| return -ENODEV; |
| } |
| |
| piix4_smba = ((smba_en_hi << 8) | smba_en_lo) & 0xffe0; |
| if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) |
| return -ENODEV; |
| |
| if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { |
| dev_err(&PIIX4_dev->dev, "SMBus region 0x%x already in use!\n", |
| piix4_smba); |
| return -EBUSY; |
| } |
| |
| /* Request the SMBus I2C bus config region */ |
| if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) { |
| dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region " |
| "0x%x already in use!\n", piix4_smba + i2ccfg_offset); |
| release_region(piix4_smba, SMBIOSIZE); |
| return -EBUSY; |
| } |
| i2ccfg = inb_p(piix4_smba + i2ccfg_offset); |
| release_region(piix4_smba + i2ccfg_offset, 1); |
| |
| if (i2ccfg & 1) |
| dev_dbg(&PIIX4_dev->dev, "Using IRQ for SMBus.\n"); |
| else |
| dev_dbg(&PIIX4_dev->dev, "Using SMI# for SMBus.\n"); |
| |
| dev_info(&PIIX4_dev->dev, |
| "SMBus Host Controller at 0x%x, revision %d\n", |
| piix4_smba, i2ccfg >> 4); |
| |
| return piix4_smba; |
| } |
| |
| static int __devinit piix4_setup_aux(struct pci_dev *PIIX4_dev, |
| const struct pci_device_id *id, |
| unsigned short base_reg_addr) |
| { |
| /* Set up auxiliary SMBus controllers found on some |
| * AMD chipsets e.g. SP5100 (SB700 derivative) */ |
| |
| unsigned short piix4_smba; |
| |
| /* Read address of auxiliary SMBus controller */ |
| pci_read_config_word(PIIX4_dev, base_reg_addr, &piix4_smba); |
| if ((piix4_smba & 1) == 0) { |
| dev_dbg(&PIIX4_dev->dev, |
| "Auxiliary SMBus controller not enabled\n"); |
| return -ENODEV; |
| } |
| |
| piix4_smba &= 0xfff0; |
| if (piix4_smba == 0) { |
| dev_dbg(&PIIX4_dev->dev, |
| "Auxiliary SMBus base address uninitialized\n"); |
| return -ENODEV; |
| } |
| |
| if (acpi_check_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) |
| return -ENODEV; |
| |
| if (!request_region(piix4_smba, SMBIOSIZE, piix4_driver.name)) { |
| dev_err(&PIIX4_dev->dev, "Auxiliary SMBus region 0x%x " |
| "already in use!\n", piix4_smba); |
| return -EBUSY; |
| } |
| |
| dev_info(&PIIX4_dev->dev, |
| "Auxiliary SMBus Host Controller at 0x%x\n", |
| piix4_smba); |
| |
| return piix4_smba; |
| } |
| |
| static int piix4_transaction(struct i2c_adapter *piix4_adapter) |
| { |
| struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(piix4_adapter); |
| unsigned short piix4_smba = adapdata->smba; |
| int temp; |
| int result = 0; |
| int timeout = 0; |
| |
| dev_dbg(&piix4_adapter->dev, "Transaction (pre): CNT=%02x, CMD=%02x, " |
| "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), |
| inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), |
| inb_p(SMBHSTDAT1)); |
| |
| /* Make sure the SMBus host is ready to start transmitting */ |
| if ((temp = inb_p(SMBHSTSTS)) != 0x00) { |
| dev_dbg(&piix4_adapter->dev, "SMBus busy (%02x). " |
| "Resetting...\n", temp); |
| outb_p(temp, SMBHSTSTS); |
| if ((temp = inb_p(SMBHSTSTS)) != 0x00) { |
| dev_err(&piix4_adapter->dev, "Failed! (%02x)\n", temp); |
| return -EBUSY; |
| } else { |
| dev_dbg(&piix4_adapter->dev, "Successful!\n"); |
| } |
| } |
| |
| /* start the transaction by setting bit 6 */ |
| outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); |
| |
| /* We will always wait for a fraction of a second! (See PIIX4 docs errata) */ |
| if (srvrworks_csb5_delay) /* Extra delay for SERVERWORKS_CSB5 */ |
| msleep(2); |
| else |
| msleep(1); |
| |
| while ((++timeout < MAX_TIMEOUT) && |
| ((temp = inb_p(SMBHSTSTS)) & 0x01)) |
| msleep(1); |
| |
| /* If the SMBus is still busy, we give up */ |
| if (timeout == MAX_TIMEOUT) { |
| dev_err(&piix4_adapter->dev, "SMBus Timeout!\n"); |
| result = -ETIMEDOUT; |
| } |
| |
| if (temp & 0x10) { |
| result = -EIO; |
| dev_err(&piix4_adapter->dev, "Error: Failed bus transaction\n"); |
| } |
| |
| if (temp & 0x08) { |
| result = -EIO; |
| dev_dbg(&piix4_adapter->dev, "Bus collision! SMBus may be " |
| "locked until next hard reset. (sorry!)\n"); |
| /* Clock stops and slave is stuck in mid-transmission */ |
| } |
| |
| if (temp & 0x04) { |
| result = -ENXIO; |
| dev_dbg(&piix4_adapter->dev, "Error: no response!\n"); |
| } |
| |
| if (inb_p(SMBHSTSTS) != 0x00) |
| outb_p(inb(SMBHSTSTS), SMBHSTSTS); |
| |
| if ((temp = inb_p(SMBHSTSTS)) != 0x00) { |
| dev_err(&piix4_adapter->dev, "Failed reset at end of " |
| "transaction (%02x)\n", temp); |
| } |
| dev_dbg(&piix4_adapter->dev, "Transaction (post): CNT=%02x, CMD=%02x, " |
| "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), |
| inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), |
| inb_p(SMBHSTDAT1)); |
| return result; |
| } |
| |
| /* Return negative errno on error. */ |
| static s32 piix4_access(struct i2c_adapter * adap, u16 addr, |
| unsigned short flags, char read_write, |
| u8 command, int size, union i2c_smbus_data * data) |
| { |
| struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); |
| unsigned short piix4_smba = adapdata->smba; |
| int i, len; |
| int status; |
| |
| switch (size) { |
| case I2C_SMBUS_QUICK: |
| outb_p((addr << 1) | read_write, |
| SMBHSTADD); |
| size = PIIX4_QUICK; |
| break; |
| case I2C_SMBUS_BYTE: |
| outb_p((addr << 1) | read_write, |
| SMBHSTADD); |
| if (read_write == I2C_SMBUS_WRITE) |
| outb_p(command, SMBHSTCMD); |
| size = PIIX4_BYTE; |
| break; |
| case I2C_SMBUS_BYTE_DATA: |
| outb_p((addr << 1) | read_write, |
| SMBHSTADD); |
| outb_p(command, SMBHSTCMD); |
| if (read_write == I2C_SMBUS_WRITE) |
| outb_p(data->byte, SMBHSTDAT0); |
| size = PIIX4_BYTE_DATA; |
| break; |
| case I2C_SMBUS_WORD_DATA: |
| outb_p((addr << 1) | read_write, |
| SMBHSTADD); |
| outb_p(command, SMBHSTCMD); |
| if (read_write == I2C_SMBUS_WRITE) { |
| outb_p(data->word & 0xff, SMBHSTDAT0); |
| outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); |
| } |
| size = PIIX4_WORD_DATA; |
| break; |
| case I2C_SMBUS_BLOCK_DATA: |
| outb_p((addr << 1) | read_write, |
| SMBHSTADD); |
| outb_p(command, SMBHSTCMD); |
| if (read_write == I2C_SMBUS_WRITE) { |
| len = data->block[0]; |
| if (len == 0 || len > I2C_SMBUS_BLOCK_MAX) |
| return -EINVAL; |
| outb_p(len, SMBHSTDAT0); |
| i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ |
| for (i = 1; i <= len; i++) |
| outb_p(data->block[i], SMBBLKDAT); |
| } |
| size = PIIX4_BLOCK_DATA; |
| break; |
| default: |
| dev_warn(&adap->dev, "Unsupported transaction %d\n", size); |
| return -EOPNOTSUPP; |
| } |
| |
| outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); |
| |
| status = piix4_transaction(adap); |
| if (status) |
| return status; |
| |
| if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK)) |
| return 0; |
| |
| |
| switch (size) { |
| case PIIX4_BYTE: |
| case PIIX4_BYTE_DATA: |
| data->byte = inb_p(SMBHSTDAT0); |
| break; |
| case PIIX4_WORD_DATA: |
| data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); |
| break; |
| case PIIX4_BLOCK_DATA: |
| data->block[0] = inb_p(SMBHSTDAT0); |
| if (data->block[0] == 0 || data->block[0] > I2C_SMBUS_BLOCK_MAX) |
| return -EPROTO; |
| i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ |
| for (i = 1; i <= data->block[0]; i++) |
| data->block[i] = inb_p(SMBBLKDAT); |
| break; |
| } |
| return 0; |
| } |
| |
| static u32 piix4_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | |
| I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | |
| I2C_FUNC_SMBUS_BLOCK_DATA; |
| } |
| |
| static const struct i2c_algorithm smbus_algorithm = { |
| .smbus_xfer = piix4_access, |
| .functionality = piix4_func, |
| }; |
| |
| static DEFINE_PCI_DEVICE_TABLE(piix4_ids) = { |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP200_SMBUS) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, |
| PCI_DEVICE_ID_SERVERWORKS_OSB4) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, |
| PCI_DEVICE_ID_SERVERWORKS_CSB5) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, |
| PCI_DEVICE_ID_SERVERWORKS_CSB6) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, |
| PCI_DEVICE_ID_SERVERWORKS_HT1000SB) }, |
| { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, |
| PCI_DEVICE_ID_SERVERWORKS_HT1100LD) }, |
| { 0, } |
| }; |
| |
| MODULE_DEVICE_TABLE (pci, piix4_ids); |
| |
| static struct i2c_adapter *piix4_main_adapter; |
| static struct i2c_adapter *piix4_aux_adapter; |
| |
| static int __devinit piix4_add_adapter(struct pci_dev *dev, |
| unsigned short smba, |
| struct i2c_adapter **padap) |
| { |
| struct i2c_adapter *adap; |
| struct i2c_piix4_adapdata *adapdata; |
| int retval; |
| |
| adap = kzalloc(sizeof(*adap), GFP_KERNEL); |
| if (adap == NULL) { |
| release_region(smba, SMBIOSIZE); |
| return -ENOMEM; |
| } |
| |
| adap->owner = THIS_MODULE; |
| adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; |
| adap->algo = &smbus_algorithm; |
| |
| adapdata = kzalloc(sizeof(*adapdata), GFP_KERNEL); |
| if (adapdata == NULL) { |
| kfree(adap); |
| release_region(smba, SMBIOSIZE); |
| return -ENOMEM; |
| } |
| |
| adapdata->smba = smba; |
| |
| /* set up the sysfs linkage to our parent device */ |
| adap->dev.parent = &dev->dev; |
| |
| snprintf(adap->name, sizeof(adap->name), |
| "SMBus PIIX4 adapter at %04x", smba); |
| |
| i2c_set_adapdata(adap, adapdata); |
| |
| retval = i2c_add_adapter(adap); |
| if (retval) { |
| dev_err(&dev->dev, "Couldn't register adapter!\n"); |
| kfree(adapdata); |
| kfree(adap); |
| release_region(smba, SMBIOSIZE); |
| return retval; |
| } |
| |
| *padap = adap; |
| return 0; |
| } |
| |
| static int __devinit piix4_probe(struct pci_dev *dev, |
| const struct pci_device_id *id) |
| { |
| int retval; |
| |
| if ((dev->vendor == PCI_VENDOR_ID_ATI && |
| dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && |
| dev->revision >= 0x40) || |
| dev->vendor == PCI_VENDOR_ID_AMD) |
| /* base address location etc changed in SB800 */ |
| retval = piix4_setup_sb800(dev, id); |
| else |
| retval = piix4_setup(dev, id); |
| |
| /* If no main SMBus found, give up */ |
| if (retval < 0) |
| return retval; |
| |
| /* Try to register main SMBus adapter, give up if we can't */ |
| retval = piix4_add_adapter(dev, retval, &piix4_main_adapter); |
| if (retval < 0) |
| return retval; |
| |
| /* Check for auxiliary SMBus on some AMD chipsets */ |
| if (dev->vendor == PCI_VENDOR_ID_ATI && |
| dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS && |
| dev->revision < 0x40) { |
| retval = piix4_setup_aux(dev, id, 0x58); |
| if (retval > 0) { |
| /* Try to add the aux adapter if it exists, |
| * piix4_add_adapter will clean up if this fails */ |
| piix4_add_adapter(dev, retval, &piix4_aux_adapter); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void __devexit piix4_adap_remove(struct i2c_adapter *adap) |
| { |
| struct i2c_piix4_adapdata *adapdata = i2c_get_adapdata(adap); |
| |
| if (adapdata->smba) { |
| i2c_del_adapter(adap); |
| release_region(adapdata->smba, SMBIOSIZE); |
| kfree(adapdata); |
| kfree(adap); |
| } |
| } |
| |
| static void __devexit piix4_remove(struct pci_dev *dev) |
| { |
| if (piix4_main_adapter) { |
| piix4_adap_remove(piix4_main_adapter); |
| piix4_main_adapter = NULL; |
| } |
| |
| if (piix4_aux_adapter) { |
| piix4_adap_remove(piix4_aux_adapter); |
| piix4_aux_adapter = NULL; |
| } |
| } |
| |
| static struct pci_driver piix4_driver = { |
| .name = "piix4_smbus", |
| .id_table = piix4_ids, |
| .probe = piix4_probe, |
| .remove = __devexit_p(piix4_remove), |
| }; |
| |
| module_pci_driver(piix4_driver); |
| |
| MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " |
| "Philip Edelbrock <phil@netroedge.com>"); |
| MODULE_DESCRIPTION("PIIX4 SMBus driver"); |
| MODULE_LICENSE("GPL"); |