| /* |
| * Marvell Armada 370/XP SoC timer handling. |
| * |
| * Copyright (C) 2012 Marvell |
| * |
| * Lior Amsalem <alior@marvell.com> |
| * Gregory CLEMENT <gregory.clement@free-electrons.com> |
| * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| * |
| * Timer 0 is used as free-running clocksource, while timer 1 is |
| * used as clock_event_device. |
| * |
| * --- |
| * Clocksource driver for Armada 370 and Armada XP SoC. |
| * This driver implements one compatible string for each SoC, given |
| * each has its own characteristics: |
| * |
| * * Armada 370 has no 25 MHz fixed timer. |
| * |
| * * Armada XP cannot work properly without such 25 MHz fixed timer as |
| * doing otherwise leads to using a clocksource whose frequency varies |
| * when doing cpufreq frequency changes. |
| * |
| * See Documentation/devicetree/bindings/timer/marvell,armada-370-xp-timer.txt |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/kernel.h> |
| #include <linux/clk.h> |
| #include <linux/cpu.h> |
| #include <linux/timer.h> |
| #include <linux/clockchips.h> |
| #include <linux/interrupt.h> |
| #include <linux/of.h> |
| #include <linux/of_irq.h> |
| #include <linux/of_address.h> |
| #include <linux/irq.h> |
| #include <linux/module.h> |
| #include <linux/sched_clock.h> |
| #include <linux/percpu.h> |
| #include <linux/syscore_ops.h> |
| |
| #include <asm/delay.h> |
| |
| /* |
| * Timer block registers. |
| */ |
| #define TIMER_CTRL_OFF 0x0000 |
| #define TIMER0_EN BIT(0) |
| #define TIMER0_RELOAD_EN BIT(1) |
| #define TIMER0_25MHZ BIT(11) |
| #define TIMER0_DIV(div) ((div) << 19) |
| #define TIMER1_EN BIT(2) |
| #define TIMER1_RELOAD_EN BIT(3) |
| #define TIMER1_25MHZ BIT(12) |
| #define TIMER1_DIV(div) ((div) << 22) |
| #define TIMER_EVENTS_STATUS 0x0004 |
| #define TIMER0_CLR_MASK (~0x1) |
| #define TIMER1_CLR_MASK (~0x100) |
| #define TIMER0_RELOAD_OFF 0x0010 |
| #define TIMER0_VAL_OFF 0x0014 |
| #define TIMER1_RELOAD_OFF 0x0018 |
| #define TIMER1_VAL_OFF 0x001c |
| |
| #define LCL_TIMER_EVENTS_STATUS 0x0028 |
| /* Global timers are connected to the coherency fabric clock, and the |
| below divider reduces their incrementing frequency. */ |
| #define TIMER_DIVIDER_SHIFT 5 |
| #define TIMER_DIVIDER (1 << TIMER_DIVIDER_SHIFT) |
| |
| /* |
| * SoC-specific data. |
| */ |
| static void __iomem *timer_base, *local_base; |
| static unsigned int timer_clk; |
| static bool timer25Mhz = true; |
| static u32 enable_mask; |
| |
| /* |
| * Number of timer ticks per jiffy. |
| */ |
| static u32 ticks_per_jiffy; |
| |
| static struct clock_event_device __percpu *armada_370_xp_evt; |
| |
| static void local_timer_ctrl_clrset(u32 clr, u32 set) |
| { |
| writel((readl(local_base + TIMER_CTRL_OFF) & ~clr) | set, |
| local_base + TIMER_CTRL_OFF); |
| } |
| |
| static u64 notrace armada_370_xp_read_sched_clock(void) |
| { |
| return ~readl(timer_base + TIMER0_VAL_OFF); |
| } |
| |
| /* |
| * Clockevent handling. |
| */ |
| static int |
| armada_370_xp_clkevt_next_event(unsigned long delta, |
| struct clock_event_device *dev) |
| { |
| /* |
| * Clear clockevent timer interrupt. |
| */ |
| writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS); |
| |
| /* |
| * Setup new clockevent timer value. |
| */ |
| writel(delta, local_base + TIMER0_VAL_OFF); |
| |
| /* |
| * Enable the timer. |
| */ |
| local_timer_ctrl_clrset(TIMER0_RELOAD_EN, enable_mask); |
| return 0; |
| } |
| |
| static int armada_370_xp_clkevt_shutdown(struct clock_event_device *evt) |
| { |
| /* |
| * Disable timer. |
| */ |
| local_timer_ctrl_clrset(TIMER0_EN, 0); |
| |
| /* |
| * ACK pending timer interrupt. |
| */ |
| writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS); |
| return 0; |
| } |
| |
| static int armada_370_xp_clkevt_set_periodic(struct clock_event_device *evt) |
| { |
| /* |
| * Setup timer to fire at 1/HZ intervals. |
| */ |
| writel(ticks_per_jiffy - 1, local_base + TIMER0_RELOAD_OFF); |
| writel(ticks_per_jiffy - 1, local_base + TIMER0_VAL_OFF); |
| |
| /* |
| * Enable timer. |
| */ |
| local_timer_ctrl_clrset(0, TIMER0_RELOAD_EN | enable_mask); |
| return 0; |
| } |
| |
| static int armada_370_xp_clkevt_irq; |
| |
| static irqreturn_t armada_370_xp_timer_interrupt(int irq, void *dev_id) |
| { |
| /* |
| * ACK timer interrupt and call event handler. |
| */ |
| struct clock_event_device *evt = dev_id; |
| |
| writel(TIMER0_CLR_MASK, local_base + LCL_TIMER_EVENTS_STATUS); |
| evt->event_handler(evt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* |
| * Setup the local clock events for a CPU. |
| */ |
| static int armada_370_xp_timer_starting_cpu(unsigned int cpu) |
| { |
| struct clock_event_device *evt = per_cpu_ptr(armada_370_xp_evt, cpu); |
| u32 clr = 0, set = 0; |
| |
| if (timer25Mhz) |
| set = TIMER0_25MHZ; |
| else |
| clr = TIMER0_25MHZ; |
| local_timer_ctrl_clrset(clr, set); |
| |
| evt->name = "armada_370_xp_per_cpu_tick", |
| evt->features = CLOCK_EVT_FEAT_ONESHOT | |
| CLOCK_EVT_FEAT_PERIODIC; |
| evt->shift = 32, |
| evt->rating = 300, |
| evt->set_next_event = armada_370_xp_clkevt_next_event, |
| evt->set_state_shutdown = armada_370_xp_clkevt_shutdown; |
| evt->set_state_periodic = armada_370_xp_clkevt_set_periodic; |
| evt->set_state_oneshot = armada_370_xp_clkevt_shutdown; |
| evt->tick_resume = armada_370_xp_clkevt_shutdown; |
| evt->irq = armada_370_xp_clkevt_irq; |
| evt->cpumask = cpumask_of(cpu); |
| |
| clockevents_config_and_register(evt, timer_clk, 1, 0xfffffffe); |
| enable_percpu_irq(evt->irq, 0); |
| |
| return 0; |
| } |
| |
| static int armada_370_xp_timer_dying_cpu(unsigned int cpu) |
| { |
| struct clock_event_device *evt = per_cpu_ptr(armada_370_xp_evt, cpu); |
| |
| evt->set_state_shutdown(evt); |
| disable_percpu_irq(evt->irq); |
| return 0; |
| } |
| |
| static u32 timer0_ctrl_reg, timer0_local_ctrl_reg; |
| |
| static int armada_370_xp_timer_suspend(void) |
| { |
| timer0_ctrl_reg = readl(timer_base + TIMER_CTRL_OFF); |
| timer0_local_ctrl_reg = readl(local_base + TIMER_CTRL_OFF); |
| return 0; |
| } |
| |
| static void armada_370_xp_timer_resume(void) |
| { |
| writel(0xffffffff, timer_base + TIMER0_VAL_OFF); |
| writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF); |
| writel(timer0_ctrl_reg, timer_base + TIMER_CTRL_OFF); |
| writel(timer0_local_ctrl_reg, local_base + TIMER_CTRL_OFF); |
| } |
| |
| static struct syscore_ops armada_370_xp_timer_syscore_ops = { |
| .suspend = armada_370_xp_timer_suspend, |
| .resume = armada_370_xp_timer_resume, |
| }; |
| |
| static unsigned long armada_370_delay_timer_read(void) |
| { |
| return ~readl(timer_base + TIMER0_VAL_OFF); |
| } |
| |
| static struct delay_timer armada_370_delay_timer = { |
| .read_current_timer = armada_370_delay_timer_read, |
| }; |
| |
| static int __init armada_370_xp_timer_common_init(struct device_node *np) |
| { |
| u32 clr = 0, set = 0; |
| int res; |
| |
| timer_base = of_iomap(np, 0); |
| if (!timer_base) { |
| pr_err("Failed to iomap"); |
| return -ENXIO; |
| } |
| |
| local_base = of_iomap(np, 1); |
| if (!local_base) { |
| pr_err("Failed to iomap"); |
| return -ENXIO; |
| } |
| |
| if (timer25Mhz) { |
| set = TIMER0_25MHZ; |
| enable_mask = TIMER0_EN; |
| } else { |
| clr = TIMER0_25MHZ; |
| enable_mask = TIMER0_EN | TIMER0_DIV(TIMER_DIVIDER_SHIFT); |
| } |
| atomic_io_modify(timer_base + TIMER_CTRL_OFF, clr | set, set); |
| local_timer_ctrl_clrset(clr, set); |
| |
| /* |
| * We use timer 0 as clocksource, and private(local) timer 0 |
| * for clockevents |
| */ |
| armada_370_xp_clkevt_irq = irq_of_parse_and_map(np, 4); |
| |
| ticks_per_jiffy = (timer_clk + HZ / 2) / HZ; |
| |
| /* |
| * Setup free-running clocksource timer (interrupts |
| * disabled). |
| */ |
| writel(0xffffffff, timer_base + TIMER0_VAL_OFF); |
| writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF); |
| |
| atomic_io_modify(timer_base + TIMER_CTRL_OFF, |
| TIMER0_RELOAD_EN | enable_mask, |
| TIMER0_RELOAD_EN | enable_mask); |
| |
| armada_370_delay_timer.freq = timer_clk; |
| register_current_timer_delay(&armada_370_delay_timer); |
| |
| /* |
| * Set scale and timer for sched_clock. |
| */ |
| sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk); |
| |
| res = clocksource_mmio_init(timer_base + TIMER0_VAL_OFF, |
| "armada_370_xp_clocksource", |
| timer_clk, 300, 32, clocksource_mmio_readl_down); |
| if (res) { |
| pr_err("Failed to initialize clocksource mmio"); |
| return res; |
| } |
| |
| armada_370_xp_evt = alloc_percpu(struct clock_event_device); |
| if (!armada_370_xp_evt) |
| return -ENOMEM; |
| |
| /* |
| * Setup clockevent timer (interrupt-driven). |
| */ |
| res = request_percpu_irq(armada_370_xp_clkevt_irq, |
| armada_370_xp_timer_interrupt, |
| "armada_370_xp_per_cpu_tick", |
| armada_370_xp_evt); |
| /* Immediately configure the timer on the boot CPU */ |
| if (res) { |
| pr_err("Failed to request percpu irq"); |
| return res; |
| } |
| |
| res = cpuhp_setup_state(CPUHP_AP_ARMADA_TIMER_STARTING, |
| "AP_ARMADA_TIMER_STARTING", |
| armada_370_xp_timer_starting_cpu, |
| armada_370_xp_timer_dying_cpu); |
| if (res) { |
| pr_err("Failed to setup hotplug state and timer"); |
| return res; |
| } |
| |
| register_syscore_ops(&armada_370_xp_timer_syscore_ops); |
| |
| return 0; |
| } |
| |
| static int __init armada_xp_timer_init(struct device_node *np) |
| { |
| struct clk *clk = of_clk_get_by_name(np, "fixed"); |
| int ret; |
| |
| clk = of_clk_get(np, 0); |
| if (IS_ERR(clk)) { |
| pr_err("Failed to get clock"); |
| return PTR_ERR(clk); |
| } |
| |
| ret = clk_prepare_enable(clk); |
| if (ret) |
| return ret; |
| |
| timer_clk = clk_get_rate(clk); |
| |
| return armada_370_xp_timer_common_init(np); |
| } |
| CLOCKSOURCE_OF_DECLARE(armada_xp, "marvell,armada-xp-timer", |
| armada_xp_timer_init); |
| |
| static int __init armada_375_timer_init(struct device_node *np) |
| { |
| struct clk *clk; |
| int ret; |
| |
| clk = of_clk_get_by_name(np, "fixed"); |
| if (!IS_ERR(clk)) { |
| ret = clk_prepare_enable(clk); |
| if (ret) |
| return ret; |
| timer_clk = clk_get_rate(clk); |
| } else { |
| |
| /* |
| * This fallback is required in order to retain proper |
| * devicetree backwards compatibility. |
| */ |
| clk = of_clk_get(np, 0); |
| |
| /* Must have at least a clock */ |
| if (IS_ERR(clk)) { |
| pr_err("Failed to get clock"); |
| return PTR_ERR(clk); |
| } |
| |
| ret = clk_prepare_enable(clk); |
| if (ret) |
| return ret; |
| |
| timer_clk = clk_get_rate(clk) / TIMER_DIVIDER; |
| timer25Mhz = false; |
| } |
| |
| return armada_370_xp_timer_common_init(np); |
| } |
| CLOCKSOURCE_OF_DECLARE(armada_375, "marvell,armada-375-timer", |
| armada_375_timer_init); |
| |
| static int __init armada_370_timer_init(struct device_node *np) |
| { |
| struct clk *clk; |
| int ret; |
| |
| clk = of_clk_get(np, 0); |
| if (IS_ERR(clk)) { |
| pr_err("Failed to get clock"); |
| return PTR_ERR(clk); |
| } |
| |
| ret = clk_prepare_enable(clk); |
| if (ret) |
| return ret; |
| |
| timer_clk = clk_get_rate(clk) / TIMER_DIVIDER; |
| timer25Mhz = false; |
| |
| return armada_370_xp_timer_common_init(np); |
| } |
| CLOCKSOURCE_OF_DECLARE(armada_370, "marvell,armada-370-timer", |
| armada_370_timer_init); |