| // SPDX-License-Identifier: GPL-2.0 |
| / { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "brcm,bcm7435"; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mips-hpt-frequency = <175625000>; |
| |
| cpu@0 { |
| compatible = "brcm,bmips5200"; |
| device_type = "cpu"; |
| reg = <0>; |
| }; |
| |
| cpu@1 { |
| compatible = "brcm,bmips5200"; |
| device_type = "cpu"; |
| reg = <1>; |
| }; |
| |
| cpu@2 { |
| compatible = "brcm,bmips5200"; |
| device_type = "cpu"; |
| reg = <2>; |
| }; |
| |
| cpu@3 { |
| compatible = "brcm,bmips5200"; |
| device_type = "cpu"; |
| reg = <3>; |
| }; |
| }; |
| |
| aliases { |
| uart0 = &uart0; |
| }; |
| |
| cpu_intc: interrupt-controller { |
| #address-cells = <0>; |
| compatible = "mti,cpu-interrupt-controller"; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| }; |
| |
| clocks { |
| uart_clk: uart_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <81000000>; |
| }; |
| |
| upg_clk: upg_clk { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <27000000>; |
| }; |
| }; |
| |
| rdb { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| compatible = "simple-bus"; |
| ranges = <0 0x10000000 0x01000000>; |
| |
| periph_intc: interrupt-controller@41b500 { |
| compatible = "brcm,bcm7038-l1-intc"; |
| reg = <0x41b500 0x40>, <0x41b600 0x40>, |
| <0x41b700 0x40>, <0x41b800 0x40>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&cpu_intc>; |
| interrupts = <2>, <3>, <2>, <3>; |
| }; |
| |
| sun_l2_intc: interrupt-controller@403000 { |
| compatible = "brcm,l2-intc"; |
| reg = <0x403000 0x30>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <52>; |
| }; |
| |
| gisb-arb@400000 { |
| compatible = "brcm,bcm7435-gisb-arb"; |
| reg = <0x400000 0xdc>; |
| native-endian; |
| interrupt-parent = <&sun_l2_intc>; |
| interrupts = <0>, <2>; |
| brcm,gisb-arb-master-mask = <0xf77f>; |
| brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "webcpu_0", |
| "pcie_0", "bsp_0", |
| "rdc_0", "raaga_0", |
| "avd_1", "jtag_0", |
| "svd_0", "vice_0", |
| "vice_1", "raaga_1", |
| "scpu"; |
| }; |
| |
| upg_irq0_intc: interrupt-controller@406780 { |
| compatible = "brcm,bcm7120-l2-intc"; |
| reg = <0x406780 0x8>; |
| |
| brcm,int-map-mask = <0x44>, <0x7000000>; |
| brcm,int-fwd-mask = <0x70000>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&periph_intc>; |
| interrupts = <60>, <58>; |
| interrupt-names = "upg_main", "upg_bsc"; |
| }; |
| |
| upg_aon_irq0_intc: interrupt-controller@409480 { |
| compatible = "brcm,bcm7120-l2-intc"; |
| reg = <0x409480 0x8>; |
| |
| brcm,int-map-mask = <0x40>, <0x18000000>, <0x100000>; |
| brcm,int-fwd-mask = <0>; |
| brcm,irq-can-wake; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&periph_intc>; |
| interrupts = <61>, <59>, <64>; |
| interrupt-names = "upg_main_aon", "upg_bsc_aon", |
| "upg_spi"; |
| }; |
| |
| sun_top_ctrl: syscon@404000 { |
| compatible = "brcm,bcm7425-sun-top-ctrl", "syscon"; |
| reg = <0x404000 0x51c>; |
| native-endian; |
| }; |
| |
| reboot { |
| compatible = "brcm,brcmstb-reboot"; |
| syscon = <&sun_top_ctrl 0x304 0x308>; |
| }; |
| |
| uart0: serial@406b00 { |
| compatible = "ns16550a"; |
| reg = <0x406b00 0x20>; |
| reg-io-width = <0x4>; |
| reg-shift = <0x2>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <66>; |
| clocks = <&uart_clk>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@406b40 { |
| compatible = "ns16550a"; |
| reg = <0x406b40 0x20>; |
| reg-io-width = <0x4>; |
| reg-shift = <0x2>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <67>; |
| clocks = <&uart_clk>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@406b80 { |
| compatible = "ns16550a"; |
| reg = <0x406b80 0x20>; |
| reg-io-width = <0x4>; |
| reg-shift = <0x2>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <68>; |
| clocks = <&uart_clk>; |
| status = "disabled"; |
| }; |
| |
| bsca: i2c@406300 { |
| clock-frequency = <390000>; |
| compatible = "brcm,brcmstb-i2c"; |
| interrupt-parent = <&upg_irq0_intc>; |
| reg = <0x406300 0x58>; |
| interrupts = <26>; |
| interrupt-names = "upg_bsca"; |
| status = "disabled"; |
| }; |
| |
| bscb: i2c@409400 { |
| clock-frequency = <390000>; |
| compatible = "brcm,brcmstb-i2c"; |
| interrupt-parent = <&upg_aon_irq0_intc>; |
| reg = <0x409400 0x58>; |
| interrupts = <28>; |
| interrupt-names = "upg_bscb"; |
| status = "disabled"; |
| }; |
| |
| bscc: i2c@406200 { |
| clock-frequency = <390000>; |
| compatible = "brcm,brcmstb-i2c"; |
| interrupt-parent = <&upg_irq0_intc>; |
| reg = <0x406200 0x58>; |
| interrupts = <24>; |
| interrupt-names = "upg_bscc"; |
| status = "disabled"; |
| }; |
| |
| bscd: i2c@406280 { |
| clock-frequency = <390000>; |
| compatible = "brcm,brcmstb-i2c"; |
| interrupt-parent = <&upg_irq0_intc>; |
| reg = <0x406280 0x58>; |
| interrupts = <25>; |
| interrupt-names = "upg_bscd"; |
| status = "disabled"; |
| }; |
| |
| bsce: i2c@409180 { |
| clock-frequency = <390000>; |
| compatible = "brcm,brcmstb-i2c"; |
| interrupt-parent = <&upg_aon_irq0_intc>; |
| reg = <0x409180 0x58>; |
| interrupts = <27>; |
| interrupt-names = "upg_bsce"; |
| status = "disabled"; |
| }; |
| |
| pwma: pwm@406580 { |
| compatible = "brcm,bcm7038-pwm"; |
| reg = <0x406580 0x28>; |
| #pwm-cells = <2>; |
| clocks = <&upg_clk>; |
| status = "disabled"; |
| }; |
| |
| pwmb: pwm@406800 { |
| compatible = "brcm,bcm7038-pwm"; |
| reg = <0x406800 0x28>; |
| #pwm-cells = <2>; |
| clocks = <&upg_clk>; |
| status = "disabled"; |
| }; |
| |
| watchdog: watchdog@4067e8 { |
| clocks = <&upg_clk>; |
| compatible = "brcm,bcm7038-wdt"; |
| reg = <0x4067e8 0x14>; |
| status = "disabled"; |
| }; |
| |
| aon_pm_l2_intc: interrupt-controller@408440 { |
| compatible = "brcm,l2-intc"; |
| reg = <0x408440 0x30>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <54>; |
| brcm,irq-can-wake; |
| }; |
| |
| aon_ctrl: syscon@408000 { |
| compatible = "brcm,brcmstb-aon-ctrl"; |
| reg = <0x408000 0x100>, <0x408200 0x200>; |
| reg-names = "aon-ctrl", "aon-sram"; |
| }; |
| |
| timers: timer@4067c0 { |
| compatible = "brcm,brcmstb-timers"; |
| reg = <0x4067c0 0x40>; |
| }; |
| |
| upg_gio: gpio@406700 { |
| compatible = "brcm,brcmstb-gpio"; |
| reg = <0x406700 0x80>; |
| #gpio-cells = <2>; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| interrupt-parent = <&upg_irq0_intc>; |
| interrupts = <6>; |
| brcm,gpio-bank-widths = <32 32 32 21>; |
| }; |
| |
| upg_gio_aon: gpio@4094c0 { |
| compatible = "brcm,brcmstb-gpio"; |
| reg = <0x4094c0 0x40>; |
| #gpio-cells = <2>; |
| #interrupt-cells = <2>; |
| gpio-controller; |
| interrupt-controller; |
| interrupt-parent = <&upg_aon_irq0_intc>; |
| interrupts = <6>; |
| interrupts-extended = <&upg_aon_irq0_intc 6>, |
| <&aon_pm_l2_intc 5>; |
| wakeup-source; |
| brcm,gpio-bank-widths = <18 4>; |
| }; |
| |
| enet0: ethernet@b80000 { |
| phy-mode = "internal"; |
| phy-handle = <&phy1>; |
| mac-address = [ 00 10 18 36 23 1a ]; |
| compatible = "brcm,genet-v3"; |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| reg = <0xb80000 0x11c88>; |
| interrupts = <17>, <18>; |
| interrupt-parent = <&periph_intc>; |
| status = "disabled"; |
| |
| mdio@e14 { |
| compatible = "brcm,genet-mdio-v3"; |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| reg = <0xe14 0x8>; |
| |
| phy1: ethernet-phy@1 { |
| max-speed = <100>; |
| reg = <0x1>; |
| compatible = "brcm,40nm-ephy", |
| "ethernet-phy-ieee802.3-c22"; |
| }; |
| }; |
| }; |
| |
| ehci0: usb@480300 { |
| compatible = "brcm,bcm7435-ehci", "generic-ehci"; |
| reg = <0x480300 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <70>; |
| status = "disabled"; |
| }; |
| |
| ohci0: usb@480400 { |
| compatible = "brcm,bcm7435-ohci", "generic-ohci"; |
| reg = <0x480400 0x100>; |
| native-endian; |
| no-big-frame-no; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <72>; |
| status = "disabled"; |
| }; |
| |
| ehci1: usb@480500 { |
| compatible = "brcm,bcm7435-ehci", "generic-ehci"; |
| reg = <0x480500 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <71>; |
| status = "disabled"; |
| }; |
| |
| ohci1: usb@480600 { |
| compatible = "brcm,bcm7435-ohci", "generic-ohci"; |
| reg = <0x480600 0x100>; |
| native-endian; |
| no-big-frame-no; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <73>; |
| status = "disabled"; |
| }; |
| |
| ehci2: usb@490300 { |
| compatible = "brcm,bcm7435-ehci", "generic-ehci"; |
| reg = <0x490300 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <75>; |
| status = "disabled"; |
| }; |
| |
| ohci2: usb@490400 { |
| compatible = "brcm,bcm7435-ohci", "generic-ohci"; |
| reg = <0x490400 0x100>; |
| native-endian; |
| no-big-frame-no; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <77>; |
| status = "disabled"; |
| }; |
| |
| ehci3: usb@490500 { |
| compatible = "brcm,bcm7435-ehci", "generic-ehci"; |
| reg = <0x490500 0x100>; |
| native-endian; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <76>; |
| status = "disabled"; |
| }; |
| |
| ohci3: usb@490600 { |
| compatible = "brcm,bcm7435-ohci", "generic-ohci"; |
| reg = <0x490600 0x100>; |
| native-endian; |
| no-big-frame-no; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <78>; |
| status = "disabled"; |
| }; |
| |
| hif_l2_intc: interrupt-controller@41b000 { |
| compatible = "brcm,l2-intc"; |
| reg = <0x41b000 0x30>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <24>; |
| }; |
| |
| nand: nand@41c800 { |
| compatible = "brcm,brcmnand-v6.2", "brcm,brcmnand"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg-names = "nand", "flash-dma"; |
| reg = <0x41c800 0x600>, <0x41d000 0x100>; |
| interrupt-parent = <&hif_l2_intc>; |
| interrupts = <24>, <4>; |
| interrupt-names = "nand_ctlrdy", "flash_dma_done"; |
| status = "disabled"; |
| }; |
| |
| sata: sata@181000 { |
| compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci"; |
| reg-names = "ahci", "top-ctrl"; |
| reg = <0x181000 0xa9c>, <0x180020 0x1c>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <45>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| sata0: sata-port@0 { |
| reg = <0>; |
| phys = <&sata_phy0>; |
| }; |
| |
| sata1: sata-port@1 { |
| reg = <1>; |
| phys = <&sata_phy1>; |
| }; |
| }; |
| |
| sata_phy: sata-phy@180100 { |
| compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3"; |
| reg = <0x180100 0x0eff>; |
| reg-names = "phy"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| |
| sata_phy0: sata-phy@0 { |
| reg = <0>; |
| #phy-cells = <0>; |
| }; |
| |
| sata_phy1: sata-phy@1 { |
| reg = <1>; |
| #phy-cells = <0>; |
| }; |
| }; |
| |
| sdhci0: sdhci@41a000 { |
| compatible = "brcm,bcm7425-sdhci"; |
| reg = <0x41a000 0x100>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <47>; |
| sd-uhs-sdr50; |
| mmc-hs200-1_8v; |
| status = "disabled"; |
| }; |
| |
| sdhci1: sdhci@41a200 { |
| compatible = "brcm,bcm7425-sdhci"; |
| reg = <0x41a200 0x100>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <48>; |
| sd-uhs-sdr50; |
| mmc-hs200-1_8v; |
| status = "disabled"; |
| }; |
| |
| spi_l2_intc: interrupt-controller@41bd00 { |
| compatible = "brcm,l2-intc"; |
| reg = <0x41bd00 0x30>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| interrupt-parent = <&periph_intc>; |
| interrupts = <25>; |
| }; |
| |
| qspi: spi@41d200 { |
| #address-cells = <0x1>; |
| #size-cells = <0x0>; |
| compatible = "brcm,spi-bcm-qspi", |
| "brcm,spi-brcmstb-qspi"; |
| clocks = <&upg_clk>; |
| reg = <0x41a920 0x4 0x41d400 0x188 0x41d200 0x50>; |
| reg-names = "cs_reg", "hif_mspi", "bspi"; |
| interrupts = <0x0 0x1 0x2 0x3 0x4 0x5 0x6>; |
| interrupt-parent = <&spi_l2_intc>; |
| interrupt-names = "spi_lr_fullness_reached", |
| "spi_lr_session_aborted", |
| "spi_lr_impatient", |
| "spi_lr_session_done", |
| "spi_lr_overread", |
| "mspi_done", |
| "mspi_halted"; |
| status = "disabled"; |
| }; |
| |
| mspi: spi@409200 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "brcm,spi-bcm-qspi", |
| "brcm,spi-brcmstb-mspi"; |
| clocks = <&upg_clk>; |
| reg = <0x409200 0x180>; |
| reg-names = "mspi"; |
| interrupts = <0x14>; |
| interrupt-parent = <&upg_aon_irq0_intc>; |
| interrupt-names = "mspi_done"; |
| status = "disabled"; |
| }; |
| |
| waketimer: waketimer@409580 { |
| compatible = "brcm,brcmstb-waketimer"; |
| reg = <0x409580 0x14>; |
| interrupts = <0x3>; |
| interrupt-parent = <&aon_pm_l2_intc>; |
| interrupt-names = "timer"; |
| clocks = <&upg_clk>; |
| status = "disabled"; |
| }; |
| }; |
| |
| memory_controllers { |
| compatible = "simple-bus"; |
| ranges = <0x0 0x103b0000 0x1a000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| memory-controller@0 { |
| compatible = "brcm,brcmstb-memc", "simple-bus"; |
| ranges = <0x0 0x0 0xa000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| memc-arb@1000 { |
| compatible = "brcm,brcmstb-memc-arb"; |
| reg = <0x1000 0x248>; |
| }; |
| |
| memc-ddr@2000 { |
| compatible = "brcm,brcmstb-memc-ddr"; |
| reg = <0x2000 0x300>; |
| }; |
| |
| ddr-phy@6000 { |
| compatible = "brcm,brcmstb-ddr-phy"; |
| reg = <0x6000 0xc8>; |
| }; |
| |
| shimphy@8000 { |
| compatible = "brcm,brcmstb-ddr-shimphy"; |
| reg = <0x8000 0x13c>; |
| }; |
| }; |
| |
| memory-controller@1 { |
| compatible = "brcm,brcmstb-memc", "simple-bus"; |
| ranges = <0x0 0x10000 0xa000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| memc-arb@1000 { |
| compatible = "brcm,brcmstb-memc-arb"; |
| reg = <0x1000 0x248>; |
| }; |
| |
| memc-ddr@2000 { |
| compatible = "brcm,brcmstb-memc-ddr"; |
| reg = <0x2000 0x300>; |
| }; |
| |
| ddr-phy@6000 { |
| compatible = "brcm,brcmstb-ddr-phy"; |
| reg = <0x6000 0xc8>; |
| }; |
| |
| shimphy@8000 { |
| compatible = "brcm,brcmstb-ddr-shimphy"; |
| reg = <0x8000 0x13c>; |
| }; |
| }; |
| }; |
| |
| pcie_0: pcie@8b20000 { |
| status = "disabled"; |
| compatible = "brcm,bcm7435-pcie"; |
| |
| ranges = <0x02000000 0x0 0xd0000000 0xd0000000 0x0 0x08000000 |
| 0x02000000 0x0 0xd8000000 0xd8000000 0x0 0x08000000 |
| 0x02000000 0x0 0xe0000000 0xe0000000 0x0 0x08000000 |
| 0x02000000 0x0 0xe8000000 0xe8000000 0x0 0x08000000>; |
| |
| reg = <0x10410000 0x19310>; |
| aspm-no-l0s; |
| device_type = "pci"; |
| msi-controller; |
| msi-parent = <&pcie_0>; |
| #address-cells = <0x3>; |
| #size-cells = <0x2>; |
| bus-range = <0x0 0xff>; |
| interrupt-map-mask = <0x0 0x0 0x0 0x7>; |
| linux,pci-domain = <0x0>; |
| |
| interrupt-parent = <&periph_intc>; |
| interrupts = <39>, <39>; |
| interrupt-names = "pcie", "msi"; |
| #interrupt-cells = <0x1>; |
| interrupt-map = <0 0 0 1 &periph_intc 0x23 |
| 0 0 0 1 &periph_intc 0x24 |
| 0 0 0 1 &periph_intc 0x25 |
| 0 0 0 1 &periph_intc 0x26>; |
| }; |
| }; |
