| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright(c) 2020 Intel Corporation. All rights reserved. */ |
| #include <linux/security.h> |
| #include <linux/debugfs.h> |
| #include <linux/ktime.h> |
| #include <linux/mutex.h> |
| #include <asm/unaligned.h> |
| #include <cxlpci.h> |
| #include <cxlmem.h> |
| #include <cxl.h> |
| |
| #include "core.h" |
| #include "trace.h" |
| |
| static bool cxl_raw_allow_all; |
| |
| /** |
| * DOC: cxl mbox |
| * |
| * Core implementation of the CXL 2.0 Type-3 Memory Device Mailbox. The |
| * implementation is used by the cxl_pci driver to initialize the device |
| * and implement the cxl_mem.h IOCTL UAPI. It also implements the |
| * backend of the cxl_pmem_ctl() transport for LIBNVDIMM. |
| */ |
| |
| #define cxl_for_each_cmd(cmd) \ |
| for ((cmd) = &cxl_mem_commands[0]; \ |
| ((cmd) - cxl_mem_commands) < ARRAY_SIZE(cxl_mem_commands); (cmd)++) |
| |
| #define CXL_CMD(_id, sin, sout, _flags) \ |
| [CXL_MEM_COMMAND_ID_##_id] = { \ |
| .info = { \ |
| .id = CXL_MEM_COMMAND_ID_##_id, \ |
| .size_in = sin, \ |
| .size_out = sout, \ |
| }, \ |
| .opcode = CXL_MBOX_OP_##_id, \ |
| .flags = _flags, \ |
| } |
| |
| #define CXL_VARIABLE_PAYLOAD ~0U |
| /* |
| * This table defines the supported mailbox commands for the driver. This table |
| * is made up of a UAPI structure. Non-negative values as parameters in the |
| * table will be validated against the user's input. For example, if size_in is |
| * 0, and the user passed in 1, it is an error. |
| */ |
| static struct cxl_mem_command cxl_mem_commands[CXL_MEM_COMMAND_ID_MAX] = { |
| CXL_CMD(IDENTIFY, 0, 0x43, CXL_CMD_FLAG_FORCE_ENABLE), |
| #ifdef CONFIG_CXL_MEM_RAW_COMMANDS |
| CXL_CMD(RAW, CXL_VARIABLE_PAYLOAD, CXL_VARIABLE_PAYLOAD, 0), |
| #endif |
| CXL_CMD(GET_SUPPORTED_LOGS, 0, CXL_VARIABLE_PAYLOAD, CXL_CMD_FLAG_FORCE_ENABLE), |
| CXL_CMD(GET_FW_INFO, 0, 0x50, 0), |
| CXL_CMD(GET_PARTITION_INFO, 0, 0x20, 0), |
| CXL_CMD(GET_LSA, 0x8, CXL_VARIABLE_PAYLOAD, 0), |
| CXL_CMD(GET_HEALTH_INFO, 0, 0x12, 0), |
| CXL_CMD(GET_LOG, 0x18, CXL_VARIABLE_PAYLOAD, CXL_CMD_FLAG_FORCE_ENABLE), |
| CXL_CMD(SET_PARTITION_INFO, 0x0a, 0, 0), |
| CXL_CMD(SET_LSA, CXL_VARIABLE_PAYLOAD, 0, 0), |
| CXL_CMD(GET_ALERT_CONFIG, 0, 0x10, 0), |
| CXL_CMD(SET_ALERT_CONFIG, 0xc, 0, 0), |
| CXL_CMD(GET_SHUTDOWN_STATE, 0, 0x1, 0), |
| CXL_CMD(SET_SHUTDOWN_STATE, 0x1, 0, 0), |
| CXL_CMD(GET_SCAN_MEDIA_CAPS, 0x10, 0x4, 0), |
| CXL_CMD(GET_TIMESTAMP, 0, 0x8, 0), |
| }; |
| |
| /* |
| * Commands that RAW doesn't permit. The rationale for each: |
| * |
| * CXL_MBOX_OP_ACTIVATE_FW: Firmware activation requires adjustment / |
| * coordination of transaction timeout values at the root bridge level. |
| * |
| * CXL_MBOX_OP_SET_PARTITION_INFO: The device memory map may change live |
| * and needs to be coordinated with HDM updates. |
| * |
| * CXL_MBOX_OP_SET_LSA: The label storage area may be cached by the |
| * driver and any writes from userspace invalidates those contents. |
| * |
| * CXL_MBOX_OP_SET_SHUTDOWN_STATE: Set shutdown state assumes no writes |
| * to the device after it is marked clean, userspace can not make that |
| * assertion. |
| * |
| * CXL_MBOX_OP_[GET_]SCAN_MEDIA: The kernel provides a native error list that |
| * is kept up to date with patrol notifications and error management. |
| * |
| * CXL_MBOX_OP_[GET_,INJECT_,CLEAR_]POISON: These commands require kernel |
| * driver orchestration for safety. |
| */ |
| static u16 cxl_disabled_raw_commands[] = { |
| CXL_MBOX_OP_ACTIVATE_FW, |
| CXL_MBOX_OP_SET_PARTITION_INFO, |
| CXL_MBOX_OP_SET_LSA, |
| CXL_MBOX_OP_SET_SHUTDOWN_STATE, |
| CXL_MBOX_OP_SCAN_MEDIA, |
| CXL_MBOX_OP_GET_SCAN_MEDIA, |
| CXL_MBOX_OP_GET_POISON, |
| CXL_MBOX_OP_INJECT_POISON, |
| CXL_MBOX_OP_CLEAR_POISON, |
| }; |
| |
| /* |
| * Command sets that RAW doesn't permit. All opcodes in this set are |
| * disabled because they pass plain text security payloads over the |
| * user/kernel boundary. This functionality is intended to be wrapped |
| * behind the keys ABI which allows for encrypted payloads in the UAPI |
| */ |
| static u8 security_command_sets[] = { |
| 0x44, /* Sanitize */ |
| 0x45, /* Persistent Memory Data-at-rest Security */ |
| 0x46, /* Security Passthrough */ |
| }; |
| |
| static bool cxl_is_security_command(u16 opcode) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(security_command_sets); i++) |
| if (security_command_sets[i] == (opcode >> 8)) |
| return true; |
| return false; |
| } |
| |
| static void cxl_set_security_cmd_enabled(struct cxl_security_state *security, |
| u16 opcode) |
| { |
| switch (opcode) { |
| case CXL_MBOX_OP_SANITIZE: |
| set_bit(CXL_SEC_ENABLED_SANITIZE, security->enabled_cmds); |
| break; |
| case CXL_MBOX_OP_SECURE_ERASE: |
| set_bit(CXL_SEC_ENABLED_SECURE_ERASE, |
| security->enabled_cmds); |
| break; |
| case CXL_MBOX_OP_GET_SECURITY_STATE: |
| set_bit(CXL_SEC_ENABLED_GET_SECURITY_STATE, |
| security->enabled_cmds); |
| break; |
| case CXL_MBOX_OP_SET_PASSPHRASE: |
| set_bit(CXL_SEC_ENABLED_SET_PASSPHRASE, |
| security->enabled_cmds); |
| break; |
| case CXL_MBOX_OP_DISABLE_PASSPHRASE: |
| set_bit(CXL_SEC_ENABLED_DISABLE_PASSPHRASE, |
| security->enabled_cmds); |
| break; |
| case CXL_MBOX_OP_UNLOCK: |
| set_bit(CXL_SEC_ENABLED_UNLOCK, security->enabled_cmds); |
| break; |
| case CXL_MBOX_OP_FREEZE_SECURITY: |
| set_bit(CXL_SEC_ENABLED_FREEZE_SECURITY, |
| security->enabled_cmds); |
| break; |
| case CXL_MBOX_OP_PASSPHRASE_SECURE_ERASE: |
| set_bit(CXL_SEC_ENABLED_PASSPHRASE_SECURE_ERASE, |
| security->enabled_cmds); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static bool cxl_is_poison_command(u16 opcode) |
| { |
| #define CXL_MBOX_OP_POISON_CMDS 0x43 |
| |
| if ((opcode >> 8) == CXL_MBOX_OP_POISON_CMDS) |
| return true; |
| |
| return false; |
| } |
| |
| static void cxl_set_poison_cmd_enabled(struct cxl_poison_state *poison, |
| u16 opcode) |
| { |
| switch (opcode) { |
| case CXL_MBOX_OP_GET_POISON: |
| set_bit(CXL_POISON_ENABLED_LIST, poison->enabled_cmds); |
| break; |
| case CXL_MBOX_OP_INJECT_POISON: |
| set_bit(CXL_POISON_ENABLED_INJECT, poison->enabled_cmds); |
| break; |
| case CXL_MBOX_OP_CLEAR_POISON: |
| set_bit(CXL_POISON_ENABLED_CLEAR, poison->enabled_cmds); |
| break; |
| case CXL_MBOX_OP_GET_SCAN_MEDIA_CAPS: |
| set_bit(CXL_POISON_ENABLED_SCAN_CAPS, poison->enabled_cmds); |
| break; |
| case CXL_MBOX_OP_SCAN_MEDIA: |
| set_bit(CXL_POISON_ENABLED_SCAN_MEDIA, poison->enabled_cmds); |
| break; |
| case CXL_MBOX_OP_GET_SCAN_MEDIA: |
| set_bit(CXL_POISON_ENABLED_SCAN_RESULTS, poison->enabled_cmds); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static struct cxl_mem_command *cxl_mem_find_command(u16 opcode) |
| { |
| struct cxl_mem_command *c; |
| |
| cxl_for_each_cmd(c) |
| if (c->opcode == opcode) |
| return c; |
| |
| return NULL; |
| } |
| |
| static const char *cxl_mem_opcode_to_name(u16 opcode) |
| { |
| struct cxl_mem_command *c; |
| |
| c = cxl_mem_find_command(opcode); |
| if (!c) |
| return NULL; |
| |
| return cxl_command_names[c->info.id].name; |
| } |
| |
| /** |
| * cxl_internal_send_cmd() - Kernel internal interface to send a mailbox command |
| * @mds: The driver data for the operation |
| * @mbox_cmd: initialized command to execute |
| * |
| * Context: Any context. |
| * Return: |
| * * %>=0 - Number of bytes returned in @out. |
| * * %-E2BIG - Payload is too large for hardware. |
| * * %-EBUSY - Couldn't acquire exclusive mailbox access. |
| * * %-EFAULT - Hardware error occurred. |
| * * %-ENXIO - Command completed, but device reported an error. |
| * * %-EIO - Unexpected output size. |
| * |
| * Mailbox commands may execute successfully yet the device itself reported an |
| * error. While this distinction can be useful for commands from userspace, the |
| * kernel will only be able to use results when both are successful. |
| */ |
| int cxl_internal_send_cmd(struct cxl_memdev_state *mds, |
| struct cxl_mbox_cmd *mbox_cmd) |
| { |
| size_t out_size, min_out; |
| int rc; |
| |
| if (mbox_cmd->size_in > mds->payload_size || |
| mbox_cmd->size_out > mds->payload_size) |
| return -E2BIG; |
| |
| out_size = mbox_cmd->size_out; |
| min_out = mbox_cmd->min_out; |
| rc = mds->mbox_send(mds, mbox_cmd); |
| /* |
| * EIO is reserved for a payload size mismatch and mbox_send() |
| * may not return this error. |
| */ |
| if (WARN_ONCE(rc == -EIO, "Bad return code: -EIO")) |
| return -ENXIO; |
| if (rc) |
| return rc; |
| |
| if (mbox_cmd->return_code != CXL_MBOX_CMD_RC_SUCCESS && |
| mbox_cmd->return_code != CXL_MBOX_CMD_RC_BACKGROUND) |
| return cxl_mbox_cmd_rc2errno(mbox_cmd); |
| |
| if (!out_size) |
| return 0; |
| |
| /* |
| * Variable sized output needs to at least satisfy the caller's |
| * minimum if not the fully requested size. |
| */ |
| if (min_out == 0) |
| min_out = out_size; |
| |
| if (mbox_cmd->size_out < min_out) |
| return -EIO; |
| return 0; |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_internal_send_cmd, CXL); |
| |
| static bool cxl_mem_raw_command_allowed(u16 opcode) |
| { |
| int i; |
| |
| if (!IS_ENABLED(CONFIG_CXL_MEM_RAW_COMMANDS)) |
| return false; |
| |
| if (security_locked_down(LOCKDOWN_PCI_ACCESS)) |
| return false; |
| |
| if (cxl_raw_allow_all) |
| return true; |
| |
| if (cxl_is_security_command(opcode)) |
| return false; |
| |
| for (i = 0; i < ARRAY_SIZE(cxl_disabled_raw_commands); i++) |
| if (cxl_disabled_raw_commands[i] == opcode) |
| return false; |
| |
| return true; |
| } |
| |
| /** |
| * cxl_payload_from_user_allowed() - Check contents of in_payload. |
| * @opcode: The mailbox command opcode. |
| * @payload_in: Pointer to the input payload passed in from user space. |
| * |
| * Return: |
| * * true - payload_in passes check for @opcode. |
| * * false - payload_in contains invalid or unsupported values. |
| * |
| * The driver may inspect payload contents before sending a mailbox |
| * command from user space to the device. The intent is to reject |
| * commands with input payloads that are known to be unsafe. This |
| * check is not intended to replace the users careful selection of |
| * mailbox command parameters and makes no guarantee that the user |
| * command will succeed, nor that it is appropriate. |
| * |
| * The specific checks are determined by the opcode. |
| */ |
| static bool cxl_payload_from_user_allowed(u16 opcode, void *payload_in) |
| { |
| switch (opcode) { |
| case CXL_MBOX_OP_SET_PARTITION_INFO: { |
| struct cxl_mbox_set_partition_info *pi = payload_in; |
| |
| if (pi->flags & CXL_SET_PARTITION_IMMEDIATE_FLAG) |
| return false; |
| break; |
| } |
| default: |
| break; |
| } |
| return true; |
| } |
| |
| static int cxl_mbox_cmd_ctor(struct cxl_mbox_cmd *mbox, |
| struct cxl_memdev_state *mds, u16 opcode, |
| size_t in_size, size_t out_size, u64 in_payload) |
| { |
| *mbox = (struct cxl_mbox_cmd) { |
| .opcode = opcode, |
| .size_in = in_size, |
| }; |
| |
| if (in_size) { |
| mbox->payload_in = vmemdup_user(u64_to_user_ptr(in_payload), |
| in_size); |
| if (IS_ERR(mbox->payload_in)) |
| return PTR_ERR(mbox->payload_in); |
| |
| if (!cxl_payload_from_user_allowed(opcode, mbox->payload_in)) { |
| dev_dbg(mds->cxlds.dev, "%s: input payload not allowed\n", |
| cxl_mem_opcode_to_name(opcode)); |
| kvfree(mbox->payload_in); |
| return -EBUSY; |
| } |
| } |
| |
| /* Prepare to handle a full payload for variable sized output */ |
| if (out_size == CXL_VARIABLE_PAYLOAD) |
| mbox->size_out = mds->payload_size; |
| else |
| mbox->size_out = out_size; |
| |
| if (mbox->size_out) { |
| mbox->payload_out = kvzalloc(mbox->size_out, GFP_KERNEL); |
| if (!mbox->payload_out) { |
| kvfree(mbox->payload_in); |
| return -ENOMEM; |
| } |
| } |
| return 0; |
| } |
| |
| static void cxl_mbox_cmd_dtor(struct cxl_mbox_cmd *mbox) |
| { |
| kvfree(mbox->payload_in); |
| kvfree(mbox->payload_out); |
| } |
| |
| static int cxl_to_mem_cmd_raw(struct cxl_mem_command *mem_cmd, |
| const struct cxl_send_command *send_cmd, |
| struct cxl_memdev_state *mds) |
| { |
| if (send_cmd->raw.rsvd) |
| return -EINVAL; |
| |
| /* |
| * Unlike supported commands, the output size of RAW commands |
| * gets passed along without further checking, so it must be |
| * validated here. |
| */ |
| if (send_cmd->out.size > mds->payload_size) |
| return -EINVAL; |
| |
| if (!cxl_mem_raw_command_allowed(send_cmd->raw.opcode)) |
| return -EPERM; |
| |
| dev_WARN_ONCE(mds->cxlds.dev, true, "raw command path used\n"); |
| |
| *mem_cmd = (struct cxl_mem_command) { |
| .info = { |
| .id = CXL_MEM_COMMAND_ID_RAW, |
| .size_in = send_cmd->in.size, |
| .size_out = send_cmd->out.size, |
| }, |
| .opcode = send_cmd->raw.opcode |
| }; |
| |
| return 0; |
| } |
| |
| static int cxl_to_mem_cmd(struct cxl_mem_command *mem_cmd, |
| const struct cxl_send_command *send_cmd, |
| struct cxl_memdev_state *mds) |
| { |
| struct cxl_mem_command *c = &cxl_mem_commands[send_cmd->id]; |
| const struct cxl_command_info *info = &c->info; |
| |
| if (send_cmd->flags & ~CXL_MEM_COMMAND_FLAG_MASK) |
| return -EINVAL; |
| |
| if (send_cmd->rsvd) |
| return -EINVAL; |
| |
| if (send_cmd->in.rsvd || send_cmd->out.rsvd) |
| return -EINVAL; |
| |
| /* Check that the command is enabled for hardware */ |
| if (!test_bit(info->id, mds->enabled_cmds)) |
| return -ENOTTY; |
| |
| /* Check that the command is not claimed for exclusive kernel use */ |
| if (test_bit(info->id, mds->exclusive_cmds)) |
| return -EBUSY; |
| |
| /* Check the input buffer is the expected size */ |
| if ((info->size_in != CXL_VARIABLE_PAYLOAD) && |
| (info->size_in != send_cmd->in.size)) |
| return -ENOMEM; |
| |
| /* Check the output buffer is at least large enough */ |
| if ((info->size_out != CXL_VARIABLE_PAYLOAD) && |
| (send_cmd->out.size < info->size_out)) |
| return -ENOMEM; |
| |
| *mem_cmd = (struct cxl_mem_command) { |
| .info = { |
| .id = info->id, |
| .flags = info->flags, |
| .size_in = send_cmd->in.size, |
| .size_out = send_cmd->out.size, |
| }, |
| .opcode = c->opcode |
| }; |
| |
| return 0; |
| } |
| |
| /** |
| * cxl_validate_cmd_from_user() - Check fields for CXL_MEM_SEND_COMMAND. |
| * @mbox_cmd: Sanitized and populated &struct cxl_mbox_cmd. |
| * @mds: The driver data for the operation |
| * @send_cmd: &struct cxl_send_command copied in from userspace. |
| * |
| * Return: |
| * * %0 - @out_cmd is ready to send. |
| * * %-ENOTTY - Invalid command specified. |
| * * %-EINVAL - Reserved fields or invalid values were used. |
| * * %-ENOMEM - Input or output buffer wasn't sized properly. |
| * * %-EPERM - Attempted to use a protected command. |
| * * %-EBUSY - Kernel has claimed exclusive access to this opcode |
| * |
| * The result of this command is a fully validated command in @mbox_cmd that is |
| * safe to send to the hardware. |
| */ |
| static int cxl_validate_cmd_from_user(struct cxl_mbox_cmd *mbox_cmd, |
| struct cxl_memdev_state *mds, |
| const struct cxl_send_command *send_cmd) |
| { |
| struct cxl_mem_command mem_cmd; |
| int rc; |
| |
| if (send_cmd->id == 0 || send_cmd->id >= CXL_MEM_COMMAND_ID_MAX) |
| return -ENOTTY; |
| |
| /* |
| * The user can never specify an input payload larger than what hardware |
| * supports, but output can be arbitrarily large (simply write out as |
| * much data as the hardware provides). |
| */ |
| if (send_cmd->in.size > mds->payload_size) |
| return -EINVAL; |
| |
| /* Sanitize and construct a cxl_mem_command */ |
| if (send_cmd->id == CXL_MEM_COMMAND_ID_RAW) |
| rc = cxl_to_mem_cmd_raw(&mem_cmd, send_cmd, mds); |
| else |
| rc = cxl_to_mem_cmd(&mem_cmd, send_cmd, mds); |
| |
| if (rc) |
| return rc; |
| |
| /* Sanitize and construct a cxl_mbox_cmd */ |
| return cxl_mbox_cmd_ctor(mbox_cmd, mds, mem_cmd.opcode, |
| mem_cmd.info.size_in, mem_cmd.info.size_out, |
| send_cmd->in.payload); |
| } |
| |
| int cxl_query_cmd(struct cxl_memdev *cxlmd, |
| struct cxl_mem_query_commands __user *q) |
| { |
| struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlmd->cxlds); |
| struct device *dev = &cxlmd->dev; |
| struct cxl_mem_command *cmd; |
| u32 n_commands; |
| int j = 0; |
| |
| dev_dbg(dev, "Query IOCTL\n"); |
| |
| if (get_user(n_commands, &q->n_commands)) |
| return -EFAULT; |
| |
| /* returns the total number if 0 elements are requested. */ |
| if (n_commands == 0) |
| return put_user(ARRAY_SIZE(cxl_mem_commands), &q->n_commands); |
| |
| /* |
| * otherwise, return max(n_commands, total commands) cxl_command_info |
| * structures. |
| */ |
| cxl_for_each_cmd(cmd) { |
| struct cxl_command_info info = cmd->info; |
| |
| if (test_bit(info.id, mds->enabled_cmds)) |
| info.flags |= CXL_MEM_COMMAND_FLAG_ENABLED; |
| if (test_bit(info.id, mds->exclusive_cmds)) |
| info.flags |= CXL_MEM_COMMAND_FLAG_EXCLUSIVE; |
| |
| if (copy_to_user(&q->commands[j++], &info, sizeof(info))) |
| return -EFAULT; |
| |
| if (j == n_commands) |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * handle_mailbox_cmd_from_user() - Dispatch a mailbox command for userspace. |
| * @mds: The driver data for the operation |
| * @mbox_cmd: The validated mailbox command. |
| * @out_payload: Pointer to userspace's output payload. |
| * @size_out: (Input) Max payload size to copy out. |
| * (Output) Payload size hardware generated. |
| * @retval: Hardware generated return code from the operation. |
| * |
| * Return: |
| * * %0 - Mailbox transaction succeeded. This implies the mailbox |
| * protocol completed successfully not that the operation itself |
| * was successful. |
| * * %-ENOMEM - Couldn't allocate a bounce buffer. |
| * * %-EFAULT - Something happened with copy_to/from_user. |
| * * %-EINTR - Mailbox acquisition interrupted. |
| * * %-EXXX - Transaction level failures. |
| * |
| * Dispatches a mailbox command on behalf of a userspace request. |
| * The output payload is copied to userspace. |
| * |
| * See cxl_send_cmd(). |
| */ |
| static int handle_mailbox_cmd_from_user(struct cxl_memdev_state *mds, |
| struct cxl_mbox_cmd *mbox_cmd, |
| u64 out_payload, s32 *size_out, |
| u32 *retval) |
| { |
| struct device *dev = mds->cxlds.dev; |
| int rc; |
| |
| dev_dbg(dev, |
| "Submitting %s command for user\n" |
| "\topcode: %x\n" |
| "\tsize: %zx\n", |
| cxl_mem_opcode_to_name(mbox_cmd->opcode), |
| mbox_cmd->opcode, mbox_cmd->size_in); |
| |
| rc = mds->mbox_send(mds, mbox_cmd); |
| if (rc) |
| goto out; |
| |
| /* |
| * @size_out contains the max size that's allowed to be written back out |
| * to userspace. While the payload may have written more output than |
| * this it will have to be ignored. |
| */ |
| if (mbox_cmd->size_out) { |
| dev_WARN_ONCE(dev, mbox_cmd->size_out > *size_out, |
| "Invalid return size\n"); |
| if (copy_to_user(u64_to_user_ptr(out_payload), |
| mbox_cmd->payload_out, mbox_cmd->size_out)) { |
| rc = -EFAULT; |
| goto out; |
| } |
| } |
| |
| *size_out = mbox_cmd->size_out; |
| *retval = mbox_cmd->return_code; |
| |
| out: |
| cxl_mbox_cmd_dtor(mbox_cmd); |
| return rc; |
| } |
| |
| int cxl_send_cmd(struct cxl_memdev *cxlmd, struct cxl_send_command __user *s) |
| { |
| struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlmd->cxlds); |
| struct device *dev = &cxlmd->dev; |
| struct cxl_send_command send; |
| struct cxl_mbox_cmd mbox_cmd; |
| int rc; |
| |
| dev_dbg(dev, "Send IOCTL\n"); |
| |
| if (copy_from_user(&send, s, sizeof(send))) |
| return -EFAULT; |
| |
| rc = cxl_validate_cmd_from_user(&mbox_cmd, mds, &send); |
| if (rc) |
| return rc; |
| |
| rc = handle_mailbox_cmd_from_user(mds, &mbox_cmd, send.out.payload, |
| &send.out.size, &send.retval); |
| if (rc) |
| return rc; |
| |
| if (copy_to_user(s, &send, sizeof(send))) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| static int cxl_xfer_log(struct cxl_memdev_state *mds, uuid_t *uuid, |
| u32 *size, u8 *out) |
| { |
| u32 remaining = *size; |
| u32 offset = 0; |
| |
| while (remaining) { |
| u32 xfer_size = min_t(u32, remaining, mds->payload_size); |
| struct cxl_mbox_cmd mbox_cmd; |
| struct cxl_mbox_get_log log; |
| int rc; |
| |
| log = (struct cxl_mbox_get_log) { |
| .uuid = *uuid, |
| .offset = cpu_to_le32(offset), |
| .length = cpu_to_le32(xfer_size), |
| }; |
| |
| mbox_cmd = (struct cxl_mbox_cmd) { |
| .opcode = CXL_MBOX_OP_GET_LOG, |
| .size_in = sizeof(log), |
| .payload_in = &log, |
| .size_out = xfer_size, |
| .payload_out = out, |
| }; |
| |
| rc = cxl_internal_send_cmd(mds, &mbox_cmd); |
| |
| /* |
| * The output payload length that indicates the number |
| * of valid bytes can be smaller than the Log buffer |
| * size. |
| */ |
| if (rc == -EIO && mbox_cmd.size_out < xfer_size) { |
| offset += mbox_cmd.size_out; |
| break; |
| } |
| |
| if (rc < 0) |
| return rc; |
| |
| out += xfer_size; |
| remaining -= xfer_size; |
| offset += xfer_size; |
| } |
| |
| *size = offset; |
| |
| return 0; |
| } |
| |
| /** |
| * cxl_walk_cel() - Walk through the Command Effects Log. |
| * @mds: The driver data for the operation |
| * @size: Length of the Command Effects Log. |
| * @cel: CEL |
| * |
| * Iterate over each entry in the CEL and determine if the driver supports the |
| * command. If so, the command is enabled for the device and can be used later. |
| */ |
| static void cxl_walk_cel(struct cxl_memdev_state *mds, size_t size, u8 *cel) |
| { |
| struct cxl_cel_entry *cel_entry; |
| const int cel_entries = size / sizeof(*cel_entry); |
| struct device *dev = mds->cxlds.dev; |
| int i; |
| |
| cel_entry = (struct cxl_cel_entry *) cel; |
| |
| for (i = 0; i < cel_entries; i++) { |
| u16 opcode = le16_to_cpu(cel_entry[i].opcode); |
| struct cxl_mem_command *cmd = cxl_mem_find_command(opcode); |
| int enabled = 0; |
| |
| if (cmd) { |
| set_bit(cmd->info.id, mds->enabled_cmds); |
| enabled++; |
| } |
| |
| if (cxl_is_poison_command(opcode)) { |
| cxl_set_poison_cmd_enabled(&mds->poison, opcode); |
| enabled++; |
| } |
| |
| if (cxl_is_security_command(opcode)) { |
| cxl_set_security_cmd_enabled(&mds->security, opcode); |
| enabled++; |
| } |
| |
| dev_dbg(dev, "Opcode 0x%04x %s\n", opcode, |
| enabled ? "enabled" : "unsupported by driver"); |
| } |
| } |
| |
| static struct cxl_mbox_get_supported_logs *cxl_get_gsl(struct cxl_memdev_state *mds) |
| { |
| struct cxl_mbox_get_supported_logs *ret; |
| struct cxl_mbox_cmd mbox_cmd; |
| int rc; |
| |
| ret = kvmalloc(mds->payload_size, GFP_KERNEL); |
| if (!ret) |
| return ERR_PTR(-ENOMEM); |
| |
| mbox_cmd = (struct cxl_mbox_cmd) { |
| .opcode = CXL_MBOX_OP_GET_SUPPORTED_LOGS, |
| .size_out = mds->payload_size, |
| .payload_out = ret, |
| /* At least the record number field must be valid */ |
| .min_out = 2, |
| }; |
| rc = cxl_internal_send_cmd(mds, &mbox_cmd); |
| if (rc < 0) { |
| kvfree(ret); |
| return ERR_PTR(rc); |
| } |
| |
| |
| return ret; |
| } |
| |
| enum { |
| CEL_UUID, |
| VENDOR_DEBUG_UUID, |
| }; |
| |
| /* See CXL 2.0 Table 170. Get Log Input Payload */ |
| static const uuid_t log_uuid[] = { |
| [CEL_UUID] = DEFINE_CXL_CEL_UUID, |
| [VENDOR_DEBUG_UUID] = DEFINE_CXL_VENDOR_DEBUG_UUID, |
| }; |
| |
| /** |
| * cxl_enumerate_cmds() - Enumerate commands for a device. |
| * @mds: The driver data for the operation |
| * |
| * Returns 0 if enumerate completed successfully. |
| * |
| * CXL devices have optional support for certain commands. This function will |
| * determine the set of supported commands for the hardware and update the |
| * enabled_cmds bitmap in the @mds. |
| */ |
| int cxl_enumerate_cmds(struct cxl_memdev_state *mds) |
| { |
| struct cxl_mbox_get_supported_logs *gsl; |
| struct device *dev = mds->cxlds.dev; |
| struct cxl_mem_command *cmd; |
| int i, rc; |
| |
| gsl = cxl_get_gsl(mds); |
| if (IS_ERR(gsl)) |
| return PTR_ERR(gsl); |
| |
| rc = -ENOENT; |
| for (i = 0; i < le16_to_cpu(gsl->entries); i++) { |
| u32 size = le32_to_cpu(gsl->entry[i].size); |
| uuid_t uuid = gsl->entry[i].uuid; |
| u8 *log; |
| |
| dev_dbg(dev, "Found LOG type %pU of size %d", &uuid, size); |
| |
| if (!uuid_equal(&uuid, &log_uuid[CEL_UUID])) |
| continue; |
| |
| log = kvmalloc(size, GFP_KERNEL); |
| if (!log) { |
| rc = -ENOMEM; |
| goto out; |
| } |
| |
| rc = cxl_xfer_log(mds, &uuid, &size, log); |
| if (rc) { |
| kvfree(log); |
| goto out; |
| } |
| |
| cxl_walk_cel(mds, size, log); |
| kvfree(log); |
| |
| /* In case CEL was bogus, enable some default commands. */ |
| cxl_for_each_cmd(cmd) |
| if (cmd->flags & CXL_CMD_FLAG_FORCE_ENABLE) |
| set_bit(cmd->info.id, mds->enabled_cmds); |
| |
| /* Found the required CEL */ |
| rc = 0; |
| } |
| out: |
| kvfree(gsl); |
| return rc; |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_enumerate_cmds, CXL); |
| |
| void cxl_event_trace_record(const struct cxl_memdev *cxlmd, |
| enum cxl_event_log_type type, |
| enum cxl_event_type event_type, |
| const uuid_t *uuid, union cxl_event *evt) |
| { |
| if (event_type == CXL_CPER_EVENT_GEN_MEDIA) |
| trace_cxl_general_media(cxlmd, type, &evt->gen_media); |
| else if (event_type == CXL_CPER_EVENT_DRAM) |
| trace_cxl_dram(cxlmd, type, &evt->dram); |
| else if (event_type == CXL_CPER_EVENT_MEM_MODULE) |
| trace_cxl_memory_module(cxlmd, type, &evt->mem_module); |
| else |
| trace_cxl_generic_event(cxlmd, type, uuid, &evt->generic); |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_event_trace_record, CXL); |
| |
| static void __cxl_event_trace_record(const struct cxl_memdev *cxlmd, |
| enum cxl_event_log_type type, |
| struct cxl_event_record_raw *record) |
| { |
| enum cxl_event_type ev_type = CXL_CPER_EVENT_GENERIC; |
| const uuid_t *uuid = &record->id; |
| |
| if (uuid_equal(uuid, &CXL_EVENT_GEN_MEDIA_UUID)) |
| ev_type = CXL_CPER_EVENT_GEN_MEDIA; |
| else if (uuid_equal(uuid, &CXL_EVENT_DRAM_UUID)) |
| ev_type = CXL_CPER_EVENT_DRAM; |
| else if (uuid_equal(uuid, &CXL_EVENT_MEM_MODULE_UUID)) |
| ev_type = CXL_CPER_EVENT_MEM_MODULE; |
| |
| cxl_event_trace_record(cxlmd, type, ev_type, uuid, &record->event); |
| } |
| |
| static int cxl_clear_event_record(struct cxl_memdev_state *mds, |
| enum cxl_event_log_type log, |
| struct cxl_get_event_payload *get_pl) |
| { |
| struct cxl_mbox_clear_event_payload *payload; |
| u16 total = le16_to_cpu(get_pl->record_count); |
| u8 max_handles = CXL_CLEAR_EVENT_MAX_HANDLES; |
| size_t pl_size = struct_size(payload, handles, max_handles); |
| struct cxl_mbox_cmd mbox_cmd; |
| u16 cnt; |
| int rc = 0; |
| int i; |
| |
| /* Payload size may limit the max handles */ |
| if (pl_size > mds->payload_size) { |
| max_handles = (mds->payload_size - sizeof(*payload)) / |
| sizeof(__le16); |
| pl_size = struct_size(payload, handles, max_handles); |
| } |
| |
| payload = kvzalloc(pl_size, GFP_KERNEL); |
| if (!payload) |
| return -ENOMEM; |
| |
| *payload = (struct cxl_mbox_clear_event_payload) { |
| .event_log = log, |
| }; |
| |
| mbox_cmd = (struct cxl_mbox_cmd) { |
| .opcode = CXL_MBOX_OP_CLEAR_EVENT_RECORD, |
| .payload_in = payload, |
| .size_in = pl_size, |
| }; |
| |
| /* |
| * Clear Event Records uses u8 for the handle cnt while Get Event |
| * Record can return up to 0xffff records. |
| */ |
| i = 0; |
| for (cnt = 0; cnt < total; cnt++) { |
| struct cxl_event_record_raw *raw = &get_pl->records[cnt]; |
| struct cxl_event_generic *gen = &raw->event.generic; |
| |
| payload->handles[i++] = gen->hdr.handle; |
| dev_dbg(mds->cxlds.dev, "Event log '%d': Clearing %u\n", log, |
| le16_to_cpu(payload->handles[i])); |
| |
| if (i == max_handles) { |
| payload->nr_recs = i; |
| rc = cxl_internal_send_cmd(mds, &mbox_cmd); |
| if (rc) |
| goto free_pl; |
| i = 0; |
| } |
| } |
| |
| /* Clear what is left if any */ |
| if (i) { |
| payload->nr_recs = i; |
| mbox_cmd.size_in = struct_size(payload, handles, i); |
| rc = cxl_internal_send_cmd(mds, &mbox_cmd); |
| if (rc) |
| goto free_pl; |
| } |
| |
| free_pl: |
| kvfree(payload); |
| return rc; |
| } |
| |
| static void cxl_mem_get_records_log(struct cxl_memdev_state *mds, |
| enum cxl_event_log_type type) |
| { |
| struct cxl_memdev *cxlmd = mds->cxlds.cxlmd; |
| struct device *dev = mds->cxlds.dev; |
| struct cxl_get_event_payload *payload; |
| struct cxl_mbox_cmd mbox_cmd; |
| u8 log_type = type; |
| u16 nr_rec; |
| |
| mutex_lock(&mds->event.log_lock); |
| payload = mds->event.buf; |
| |
| mbox_cmd = (struct cxl_mbox_cmd) { |
| .opcode = CXL_MBOX_OP_GET_EVENT_RECORD, |
| .payload_in = &log_type, |
| .size_in = sizeof(log_type), |
| .payload_out = payload, |
| .size_out = mds->payload_size, |
| .min_out = struct_size(payload, records, 0), |
| }; |
| |
| do { |
| int rc, i; |
| |
| rc = cxl_internal_send_cmd(mds, &mbox_cmd); |
| if (rc) { |
| dev_err_ratelimited(dev, |
| "Event log '%d': Failed to query event records : %d", |
| type, rc); |
| break; |
| } |
| |
| nr_rec = le16_to_cpu(payload->record_count); |
| if (!nr_rec) |
| break; |
| |
| for (i = 0; i < nr_rec; i++) |
| __cxl_event_trace_record(cxlmd, type, |
| &payload->records[i]); |
| |
| if (payload->flags & CXL_GET_EVENT_FLAG_OVERFLOW) |
| trace_cxl_overflow(cxlmd, type, payload); |
| |
| rc = cxl_clear_event_record(mds, type, payload); |
| if (rc) { |
| dev_err_ratelimited(dev, |
| "Event log '%d': Failed to clear events : %d", |
| type, rc); |
| break; |
| } |
| } while (nr_rec); |
| |
| mutex_unlock(&mds->event.log_lock); |
| } |
| |
| /** |
| * cxl_mem_get_event_records - Get Event Records from the device |
| * @mds: The driver data for the operation |
| * @status: Event Status register value identifying which events are available. |
| * |
| * Retrieve all event records available on the device, report them as trace |
| * events, and clear them. |
| * |
| * See CXL rev 3.0 @8.2.9.2.2 Get Event Records |
| * See CXL rev 3.0 @8.2.9.2.3 Clear Event Records |
| */ |
| void cxl_mem_get_event_records(struct cxl_memdev_state *mds, u32 status) |
| { |
| dev_dbg(mds->cxlds.dev, "Reading event logs: %x\n", status); |
| |
| if (status & CXLDEV_EVENT_STATUS_FATAL) |
| cxl_mem_get_records_log(mds, CXL_EVENT_TYPE_FATAL); |
| if (status & CXLDEV_EVENT_STATUS_FAIL) |
| cxl_mem_get_records_log(mds, CXL_EVENT_TYPE_FAIL); |
| if (status & CXLDEV_EVENT_STATUS_WARN) |
| cxl_mem_get_records_log(mds, CXL_EVENT_TYPE_WARN); |
| if (status & CXLDEV_EVENT_STATUS_INFO) |
| cxl_mem_get_records_log(mds, CXL_EVENT_TYPE_INFO); |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_mem_get_event_records, CXL); |
| |
| /** |
| * cxl_mem_get_partition_info - Get partition info |
| * @mds: The driver data for the operation |
| * |
| * Retrieve the current partition info for the device specified. The active |
| * values are the current capacity in bytes. If not 0, the 'next' values are |
| * the pending values, in bytes, which take affect on next cold reset. |
| * |
| * Return: 0 if no error: or the result of the mailbox command. |
| * |
| * See CXL @8.2.9.5.2.1 Get Partition Info |
| */ |
| static int cxl_mem_get_partition_info(struct cxl_memdev_state *mds) |
| { |
| struct cxl_mbox_get_partition_info pi; |
| struct cxl_mbox_cmd mbox_cmd; |
| int rc; |
| |
| mbox_cmd = (struct cxl_mbox_cmd) { |
| .opcode = CXL_MBOX_OP_GET_PARTITION_INFO, |
| .size_out = sizeof(pi), |
| .payload_out = &pi, |
| }; |
| rc = cxl_internal_send_cmd(mds, &mbox_cmd); |
| if (rc) |
| return rc; |
| |
| mds->active_volatile_bytes = |
| le64_to_cpu(pi.active_volatile_cap) * CXL_CAPACITY_MULTIPLIER; |
| mds->active_persistent_bytes = |
| le64_to_cpu(pi.active_persistent_cap) * CXL_CAPACITY_MULTIPLIER; |
| mds->next_volatile_bytes = |
| le64_to_cpu(pi.next_volatile_cap) * CXL_CAPACITY_MULTIPLIER; |
| mds->next_persistent_bytes = |
| le64_to_cpu(pi.next_volatile_cap) * CXL_CAPACITY_MULTIPLIER; |
| |
| return 0; |
| } |
| |
| /** |
| * cxl_dev_state_identify() - Send the IDENTIFY command to the device. |
| * @mds: The driver data for the operation |
| * |
| * Return: 0 if identify was executed successfully or media not ready. |
| * |
| * This will dispatch the identify command to the device and on success populate |
| * structures to be exported to sysfs. |
| */ |
| int cxl_dev_state_identify(struct cxl_memdev_state *mds) |
| { |
| /* See CXL 2.0 Table 175 Identify Memory Device Output Payload */ |
| struct cxl_mbox_identify id; |
| struct cxl_mbox_cmd mbox_cmd; |
| u32 val; |
| int rc; |
| |
| if (!mds->cxlds.media_ready) |
| return 0; |
| |
| mbox_cmd = (struct cxl_mbox_cmd) { |
| .opcode = CXL_MBOX_OP_IDENTIFY, |
| .size_out = sizeof(id), |
| .payload_out = &id, |
| }; |
| rc = cxl_internal_send_cmd(mds, &mbox_cmd); |
| if (rc < 0) |
| return rc; |
| |
| mds->total_bytes = |
| le64_to_cpu(id.total_capacity) * CXL_CAPACITY_MULTIPLIER; |
| mds->volatile_only_bytes = |
| le64_to_cpu(id.volatile_capacity) * CXL_CAPACITY_MULTIPLIER; |
| mds->persistent_only_bytes = |
| le64_to_cpu(id.persistent_capacity) * CXL_CAPACITY_MULTIPLIER; |
| mds->partition_align_bytes = |
| le64_to_cpu(id.partition_align) * CXL_CAPACITY_MULTIPLIER; |
| |
| mds->lsa_size = le32_to_cpu(id.lsa_size); |
| memcpy(mds->firmware_version, id.fw_revision, |
| sizeof(id.fw_revision)); |
| |
| if (test_bit(CXL_POISON_ENABLED_LIST, mds->poison.enabled_cmds)) { |
| val = get_unaligned_le24(id.poison_list_max_mer); |
| mds->poison.max_errors = min_t(u32, val, CXL_POISON_LIST_MAX); |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_dev_state_identify, CXL); |
| |
| static int __cxl_mem_sanitize(struct cxl_memdev_state *mds, u16 cmd) |
| { |
| int rc; |
| u32 sec_out = 0; |
| struct cxl_get_security_output { |
| __le32 flags; |
| } out; |
| struct cxl_mbox_cmd sec_cmd = { |
| .opcode = CXL_MBOX_OP_GET_SECURITY_STATE, |
| .payload_out = &out, |
| .size_out = sizeof(out), |
| }; |
| struct cxl_mbox_cmd mbox_cmd = { .opcode = cmd }; |
| struct cxl_dev_state *cxlds = &mds->cxlds; |
| |
| if (cmd != CXL_MBOX_OP_SANITIZE && cmd != CXL_MBOX_OP_SECURE_ERASE) |
| return -EINVAL; |
| |
| rc = cxl_internal_send_cmd(mds, &sec_cmd); |
| if (rc < 0) { |
| dev_err(cxlds->dev, "Failed to get security state : %d", rc); |
| return rc; |
| } |
| |
| /* |
| * Prior to using these commands, any security applied to |
| * the user data areas of the device shall be DISABLED (or |
| * UNLOCKED for secure erase case). |
| */ |
| sec_out = le32_to_cpu(out.flags); |
| if (sec_out & CXL_PMEM_SEC_STATE_USER_PASS_SET) |
| return -EINVAL; |
| |
| if (cmd == CXL_MBOX_OP_SECURE_ERASE && |
| sec_out & CXL_PMEM_SEC_STATE_LOCKED) |
| return -EINVAL; |
| |
| rc = cxl_internal_send_cmd(mds, &mbox_cmd); |
| if (rc < 0) { |
| dev_err(cxlds->dev, "Failed to sanitize device : %d", rc); |
| return rc; |
| } |
| |
| return 0; |
| } |
| |
| |
| /** |
| * cxl_mem_sanitize() - Send a sanitization command to the device. |
| * @cxlmd: The device for the operation |
| * @cmd: The specific sanitization command opcode |
| * |
| * Return: 0 if the command was executed successfully, regardless of |
| * whether or not the actual security operation is done in the background, |
| * such as for the Sanitize case. |
| * Error return values can be the result of the mailbox command, -EINVAL |
| * when security requirements are not met or invalid contexts, or -EBUSY |
| * if the sanitize operation is already in flight. |
| * |
| * See CXL 3.0 @8.2.9.8.5.1 Sanitize and @8.2.9.8.5.2 Secure Erase. |
| */ |
| int cxl_mem_sanitize(struct cxl_memdev *cxlmd, u16 cmd) |
| { |
| struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlmd->cxlds); |
| struct cxl_port *endpoint; |
| int rc; |
| |
| /* synchronize with cxl_mem_probe() and decoder write operations */ |
| device_lock(&cxlmd->dev); |
| endpoint = cxlmd->endpoint; |
| down_read(&cxl_region_rwsem); |
| /* |
| * Require an endpoint to be safe otherwise the driver can not |
| * be sure that the device is unmapped. |
| */ |
| if (endpoint && cxl_num_decoders_committed(endpoint) == 0) |
| rc = __cxl_mem_sanitize(mds, cmd); |
| else |
| rc = -EBUSY; |
| up_read(&cxl_region_rwsem); |
| device_unlock(&cxlmd->dev); |
| |
| return rc; |
| } |
| |
| static int add_dpa_res(struct device *dev, struct resource *parent, |
| struct resource *res, resource_size_t start, |
| resource_size_t size, const char *type) |
| { |
| int rc; |
| |
| res->name = type; |
| res->start = start; |
| res->end = start + size - 1; |
| res->flags = IORESOURCE_MEM; |
| if (resource_size(res) == 0) { |
| dev_dbg(dev, "DPA(%s): no capacity\n", res->name); |
| return 0; |
| } |
| rc = request_resource(parent, res); |
| if (rc) { |
| dev_err(dev, "DPA(%s): failed to track %pr (%d)\n", res->name, |
| res, rc); |
| return rc; |
| } |
| |
| dev_dbg(dev, "DPA(%s): %pr\n", res->name, res); |
| |
| return 0; |
| } |
| |
| int cxl_mem_create_range_info(struct cxl_memdev_state *mds) |
| { |
| struct cxl_dev_state *cxlds = &mds->cxlds; |
| struct device *dev = cxlds->dev; |
| int rc; |
| |
| if (!cxlds->media_ready) { |
| cxlds->dpa_res = DEFINE_RES_MEM(0, 0); |
| cxlds->ram_res = DEFINE_RES_MEM(0, 0); |
| cxlds->pmem_res = DEFINE_RES_MEM(0, 0); |
| return 0; |
| } |
| |
| cxlds->dpa_res = DEFINE_RES_MEM(0, mds->total_bytes); |
| |
| if (mds->partition_align_bytes == 0) { |
| rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->ram_res, 0, |
| mds->volatile_only_bytes, "ram"); |
| if (rc) |
| return rc; |
| return add_dpa_res(dev, &cxlds->dpa_res, &cxlds->pmem_res, |
| mds->volatile_only_bytes, |
| mds->persistent_only_bytes, "pmem"); |
| } |
| |
| rc = cxl_mem_get_partition_info(mds); |
| if (rc) { |
| dev_err(dev, "Failed to query partition information\n"); |
| return rc; |
| } |
| |
| rc = add_dpa_res(dev, &cxlds->dpa_res, &cxlds->ram_res, 0, |
| mds->active_volatile_bytes, "ram"); |
| if (rc) |
| return rc; |
| return add_dpa_res(dev, &cxlds->dpa_res, &cxlds->pmem_res, |
| mds->active_volatile_bytes, |
| mds->active_persistent_bytes, "pmem"); |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_mem_create_range_info, CXL); |
| |
| int cxl_set_timestamp(struct cxl_memdev_state *mds) |
| { |
| struct cxl_mbox_cmd mbox_cmd; |
| struct cxl_mbox_set_timestamp_in pi; |
| int rc; |
| |
| pi.timestamp = cpu_to_le64(ktime_get_real_ns()); |
| mbox_cmd = (struct cxl_mbox_cmd) { |
| .opcode = CXL_MBOX_OP_SET_TIMESTAMP, |
| .size_in = sizeof(pi), |
| .payload_in = &pi, |
| }; |
| |
| rc = cxl_internal_send_cmd(mds, &mbox_cmd); |
| /* |
| * Command is optional. Devices may have another way of providing |
| * a timestamp, or may return all 0s in timestamp fields. |
| * Don't report an error if this command isn't supported |
| */ |
| if (rc && (mbox_cmd.return_code != CXL_MBOX_CMD_RC_UNSUPPORTED)) |
| return rc; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_set_timestamp, CXL); |
| |
| int cxl_mem_get_poison(struct cxl_memdev *cxlmd, u64 offset, u64 len, |
| struct cxl_region *cxlr) |
| { |
| struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlmd->cxlds); |
| struct cxl_mbox_poison_out *po; |
| struct cxl_mbox_poison_in pi; |
| struct cxl_mbox_cmd mbox_cmd; |
| int nr_records = 0; |
| int rc; |
| |
| rc = mutex_lock_interruptible(&mds->poison.lock); |
| if (rc) |
| return rc; |
| |
| po = mds->poison.list_out; |
| pi.offset = cpu_to_le64(offset); |
| pi.length = cpu_to_le64(len / CXL_POISON_LEN_MULT); |
| |
| mbox_cmd = (struct cxl_mbox_cmd) { |
| .opcode = CXL_MBOX_OP_GET_POISON, |
| .size_in = sizeof(pi), |
| .payload_in = &pi, |
| .size_out = mds->payload_size, |
| .payload_out = po, |
| .min_out = struct_size(po, record, 0), |
| }; |
| |
| do { |
| rc = cxl_internal_send_cmd(mds, &mbox_cmd); |
| if (rc) |
| break; |
| |
| for (int i = 0; i < le16_to_cpu(po->count); i++) |
| trace_cxl_poison(cxlmd, cxlr, &po->record[i], |
| po->flags, po->overflow_ts, |
| CXL_POISON_TRACE_LIST); |
| |
| /* Protect against an uncleared _FLAG_MORE */ |
| nr_records = nr_records + le16_to_cpu(po->count); |
| if (nr_records >= mds->poison.max_errors) { |
| dev_dbg(&cxlmd->dev, "Max Error Records reached: %d\n", |
| nr_records); |
| break; |
| } |
| } while (po->flags & CXL_POISON_FLAG_MORE); |
| |
| mutex_unlock(&mds->poison.lock); |
| return rc; |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_mem_get_poison, CXL); |
| |
| static void free_poison_buf(void *buf) |
| { |
| kvfree(buf); |
| } |
| |
| /* Get Poison List output buffer is protected by mds->poison.lock */ |
| static int cxl_poison_alloc_buf(struct cxl_memdev_state *mds) |
| { |
| mds->poison.list_out = kvmalloc(mds->payload_size, GFP_KERNEL); |
| if (!mds->poison.list_out) |
| return -ENOMEM; |
| |
| return devm_add_action_or_reset(mds->cxlds.dev, free_poison_buf, |
| mds->poison.list_out); |
| } |
| |
| int cxl_poison_state_init(struct cxl_memdev_state *mds) |
| { |
| int rc; |
| |
| if (!test_bit(CXL_POISON_ENABLED_LIST, mds->poison.enabled_cmds)) |
| return 0; |
| |
| rc = cxl_poison_alloc_buf(mds); |
| if (rc) { |
| clear_bit(CXL_POISON_ENABLED_LIST, mds->poison.enabled_cmds); |
| return rc; |
| } |
| |
| mutex_init(&mds->poison.lock); |
| return 0; |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_poison_state_init, CXL); |
| |
| struct cxl_memdev_state *cxl_memdev_state_create(struct device *dev) |
| { |
| struct cxl_memdev_state *mds; |
| |
| mds = devm_kzalloc(dev, sizeof(*mds), GFP_KERNEL); |
| if (!mds) { |
| dev_err(dev, "No memory available\n"); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| mutex_init(&mds->mbox_mutex); |
| mutex_init(&mds->event.log_lock); |
| mds->cxlds.dev = dev; |
| mds->cxlds.reg_map.host = dev; |
| mds->cxlds.reg_map.resource = CXL_RESOURCE_NONE; |
| mds->cxlds.type = CXL_DEVTYPE_CLASSMEM; |
| mds->ram_perf.qos_class = CXL_QOS_CLASS_INVALID; |
| mds->pmem_perf.qos_class = CXL_QOS_CLASS_INVALID; |
| |
| return mds; |
| } |
| EXPORT_SYMBOL_NS_GPL(cxl_memdev_state_create, CXL); |
| |
| void __init cxl_mbox_init(void) |
| { |
| struct dentry *mbox_debugfs; |
| |
| mbox_debugfs = cxl_debugfs_create_dir("mbox"); |
| debugfs_create_bool("raw_allow_all", 0600, mbox_debugfs, |
| &cxl_raw_allow_all); |
| } |