| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Generic System Framebuffers |
| * Copyright (c) 2012-2013 David Herrmann <dh.herrmann@gmail.com> |
| */ |
| |
| /* |
| * Simple-Framebuffer support |
| * Create a platform-device for any available boot framebuffer. The |
| * simple-framebuffer platform device is already available on DT systems, so |
| * this module parses the global "screen_info" object and creates a suitable |
| * platform device compatible with the "simple-framebuffer" DT object. If |
| * the framebuffer is incompatible, we instead create a legacy |
| * "vesa-framebuffer", "efi-framebuffer" or "platform-framebuffer" device and |
| * pass the screen_info as platform_data. This allows legacy drivers |
| * to pick these devices up without messing with simple-framebuffer drivers. |
| * The global "screen_info" is still valid at all times. |
| * |
| * If CONFIG_SYSFB_SIMPLEFB is not selected, never register "simple-framebuffer" |
| * platform devices, but only use legacy framebuffer devices for |
| * backwards compatibility. |
| * |
| * TODO: We set the dev_id field of all platform-devices to 0. This allows |
| * other OF/DT parsers to create such devices, too. However, they must |
| * start at offset 1 for this to work. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/pci.h> |
| #include <linux/platform_data/simplefb.h> |
| #include <linux/platform_device.h> |
| #include <linux/screen_info.h> |
| #include <linux/sysfb.h> |
| |
| static struct platform_device *pd; |
| static DEFINE_MUTEX(disable_lock); |
| static bool disabled; |
| |
| static struct device *sysfb_parent_dev(const struct screen_info *si); |
| |
| static bool sysfb_unregister(void) |
| { |
| if (IS_ERR_OR_NULL(pd)) |
| return false; |
| |
| platform_device_unregister(pd); |
| pd = NULL; |
| |
| return true; |
| } |
| |
| /** |
| * sysfb_disable() - disable the Generic System Framebuffers support |
| * @dev: the device to check if non-NULL |
| * |
| * This disables the registration of system framebuffer devices that match the |
| * generic drivers that make use of the system framebuffer set up by firmware. |
| * |
| * It also unregisters a device if this was already registered by sysfb_init(). |
| * |
| * Context: The function can sleep. A @disable_lock mutex is acquired to serialize |
| * against sysfb_init(), that registers a system framebuffer device. |
| */ |
| void sysfb_disable(struct device *dev) |
| { |
| struct screen_info *si = &screen_info; |
| |
| mutex_lock(&disable_lock); |
| if (!dev || dev == sysfb_parent_dev(si)) { |
| sysfb_unregister(); |
| disabled = true; |
| } |
| mutex_unlock(&disable_lock); |
| } |
| EXPORT_SYMBOL_GPL(sysfb_disable); |
| |
| #if defined(CONFIG_PCI) |
| static bool sysfb_pci_dev_is_enabled(struct pci_dev *pdev) |
| { |
| /* |
| * TODO: Try to integrate this code into the PCI subsystem |
| */ |
| int ret; |
| u16 command; |
| |
| ret = pci_read_config_word(pdev, PCI_COMMAND, &command); |
| if (ret != PCIBIOS_SUCCESSFUL) |
| return false; |
| if (!(command & PCI_COMMAND_MEMORY)) |
| return false; |
| return true; |
| } |
| #else |
| static bool sysfb_pci_dev_is_enabled(struct pci_dev *pdev) |
| { |
| return false; |
| } |
| #endif |
| |
| static struct device *sysfb_parent_dev(const struct screen_info *si) |
| { |
| struct pci_dev *pdev; |
| |
| pdev = screen_info_pci_dev(si); |
| if (IS_ERR(pdev)) { |
| return ERR_CAST(pdev); |
| } else if (pdev) { |
| if (!sysfb_pci_dev_is_enabled(pdev)) { |
| pci_dev_put(pdev); |
| return ERR_PTR(-ENODEV); |
| } |
| return &pdev->dev; |
| } |
| |
| return NULL; |
| } |
| |
| static __init int sysfb_init(void) |
| { |
| struct screen_info *si = &screen_info; |
| struct device *parent; |
| struct simplefb_platform_data mode; |
| const char *name; |
| bool compatible; |
| int ret = 0; |
| |
| screen_info_apply_fixups(); |
| |
| mutex_lock(&disable_lock); |
| if (disabled) |
| goto unlock_mutex; |
| |
| sysfb_apply_efi_quirks(); |
| |
| parent = sysfb_parent_dev(si); |
| if (IS_ERR(parent)) { |
| ret = PTR_ERR(parent); |
| goto unlock_mutex; |
| } |
| |
| /* try to create a simple-framebuffer device */ |
| compatible = sysfb_parse_mode(si, &mode); |
| if (compatible) { |
| pd = sysfb_create_simplefb(si, &mode, parent); |
| if (!IS_ERR(pd)) |
| goto put_device; |
| } |
| |
| /* if the FB is incompatible, create a legacy framebuffer device */ |
| if (si->orig_video_isVGA == VIDEO_TYPE_EFI) |
| name = "efi-framebuffer"; |
| else if (si->orig_video_isVGA == VIDEO_TYPE_VLFB) |
| name = "vesa-framebuffer"; |
| else if (si->orig_video_isVGA == VIDEO_TYPE_VGAC) |
| name = "vga-framebuffer"; |
| else if (si->orig_video_isVGA == VIDEO_TYPE_EGAC) |
| name = "ega-framebuffer"; |
| else |
| name = "platform-framebuffer"; |
| |
| pd = platform_device_alloc(name, 0); |
| if (!pd) { |
| ret = -ENOMEM; |
| goto put_device; |
| } |
| |
| pd->dev.parent = parent; |
| |
| sysfb_set_efifb_fwnode(pd); |
| |
| ret = platform_device_add_data(pd, si, sizeof(*si)); |
| if (ret) |
| goto err; |
| |
| ret = platform_device_add(pd); |
| if (ret) |
| goto err; |
| |
| goto put_device; |
| err: |
| platform_device_put(pd); |
| put_device: |
| put_device(parent); |
| unlock_mutex: |
| mutex_unlock(&disable_lock); |
| return ret; |
| } |
| |
| /* must execute after PCI subsystem for EFI quirks */ |
| device_initcall(sysfb_init); |