| # |
| # USB Input driver configuration |
| # |
| comment "USB Input Devices" |
| depends on USB |
| |
| config USB_HID |
| tristate "USB Human Interface Device (full HID) support" |
| default y |
| depends on USB && INPUT |
| select HID |
| ---help--- |
| Say Y here if you want full HID support to connect USB keyboards, |
| mice, joysticks, graphic tablets, or any other HID based devices |
| to your computer via USB, as well as Uninterruptible Power Supply |
| (UPS) and monitor control devices. |
| |
| You can't use this driver and the HIDBP (Boot Protocol) keyboard |
| and mouse drivers at the same time. More information is available: |
| <file:Documentation/input/input.txt>. |
| |
| If unsure, say Y. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called usbhid. |
| |
| comment "Input core support is needed for USB HID input layer or HIDBP support" |
| depends on USB_HID && INPUT=n |
| |
| config USB_HIDINPUT_POWERBOOK |
| bool "Enable support for iBook/PowerBook special keys" |
| default n |
| depends on USB_HID |
| help |
| Say Y here if you want support for the special keys (Fn, Numlock) on |
| Apple iBooks and PowerBooks. |
| |
| If unsure, say N. |
| |
| config HID_FF |
| bool "Force feedback support (EXPERIMENTAL)" |
| depends on USB_HID && EXPERIMENTAL |
| help |
| Say Y here is you want force feedback support for a few HID devices. |
| See below for a list of supported devices. |
| |
| See <file:Documentation/input/ff.txt> for a description of the force |
| feedback API. |
| |
| If unsure, say N. |
| |
| config HID_PID |
| bool "PID device support" |
| depends on HID_FF |
| help |
| Say Y here if you have a PID-compliant device and wish to enable force |
| feedback for it. Microsoft Sidewinder Force Feedback 2 is one of such |
| devices. |
| |
| config LOGITECH_FF |
| bool "Logitech devices support" |
| depends on HID_FF |
| select INPUT_FF_MEMLESS if USB_HID |
| help |
| Say Y here if you have one of these devices: |
| - Logitech WingMan Cordless RumblePad |
| - Logitech WingMan Cordless RumblePad 2 |
| - Logitech WingMan Force 3D |
| - Logitech Formula Force EX |
| - Logitech MOMO Force wheel |
| |
| and if you want to enable force feedback for them. |
| Note: if you say N here, this device will still be supported, but without |
| force feedback. |
| |
| config PANTHERLORD_FF |
| bool "PantherLord USB/PS2 2in1 Adapter support" |
| depends on HID_FF |
| select INPUT_FF_MEMLESS if USB_HID |
| help |
| Say Y here if you have a PantherLord USB/PS2 2in1 Adapter and want |
| to enable force feedback support for it. |
| |
| config THRUSTMASTER_FF |
| bool "ThrustMaster FireStorm Dual Power 2 support (EXPERIMENTAL)" |
| depends on HID_FF && EXPERIMENTAL |
| select INPUT_FF_MEMLESS if USB_HID |
| help |
| Say Y here if you have a THRUSTMASTER FireStore Dual Power 2, |
| and want to enable force feedback support for it. |
| Note: if you say N here, this device will still be supported, but without |
| force feedback. |
| |
| config ZEROPLUS_FF |
| bool "Zeroplus based game controller support" |
| depends on HID_FF |
| select INPUT_FF_MEMLESS if USB_HID |
| help |
| Say Y here if you have a Zeroplus based game controller and want to |
| enable force feedback for it. |
| |
| config USB_HIDDEV |
| bool "/dev/hiddev raw HID device support" |
| depends on USB_HID |
| help |
| Say Y here if you want to support HID devices (from the USB |
| specification standpoint) that aren't strictly user interface |
| devices, like monitor controls and Uninterruptable Power Supplies. |
| |
| This module supports these devices separately using a separate |
| event interface on /dev/usb/hiddevX (char 180:96 to 180:111). |
| |
| If unsure, say Y. |
| |
| menu "USB HID Boot Protocol drivers" |
| depends on USB!=n && USB_HID!=y |
| |
| config USB_KBD |
| tristate "USB HIDBP Keyboard (simple Boot) support" |
| depends on USB && INPUT |
| ---help--- |
| Say Y here only if you are absolutely sure that you don't want |
| to use the generic HID driver for your USB keyboard and prefer |
| to use the keyboard in its limited Boot Protocol mode instead. |
| |
| This is almost certainly not what you want. This is mostly |
| useful for embedded applications or simple keyboards. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called usbkbd. |
| |
| If even remotely unsure, say N. |
| |
| config USB_MOUSE |
| tristate "USB HIDBP Mouse (simple Boot) support" |
| depends on USB && INPUT |
| ---help--- |
| Say Y here only if you are absolutely sure that you don't want |
| to use the generic HID driver for your USB mouse and prefer |
| to use the mouse in its limited Boot Protocol mode instead. |
| |
| This is almost certainly not what you want. This is mostly |
| useful for embedded applications or simple mice. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called usbmouse. |
| |
| If even remotely unsure, say N. |
| |
| endmenu |
| |
| config USB_AIPTEK |
| tristate "Aiptek 6000U/8000U tablet support" |
| depends on USB && INPUT |
| help |
| Say Y here if you want to use the USB version of the Aiptek 6000U |
| or Aiptek 8000U tablet. Make sure to say Y to "Mouse support" |
| (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" |
| (CONFIG_INPUT_EVDEV) as well. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called aiptek. |
| |
| config USB_WACOM |
| tristate "Wacom Intuos/Graphire tablet support" |
| depends on USB && INPUT |
| help |
| Say Y here if you want to use the USB version of the Wacom Intuos |
| or Graphire tablet. Make sure to say Y to "Mouse support" |
| (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" |
| (CONFIG_INPUT_EVDEV) as well. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called wacom. |
| |
| config USB_ACECAD |
| tristate "Acecad Flair tablet support" |
| depends on USB && INPUT |
| help |
| Say Y here if you want to use the USB version of the Acecad Flair |
| tablet. Make sure to say Y to "Mouse support" |
| (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" |
| (CONFIG_INPUT_EVDEV) as well. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called acecad. |
| |
| config USB_KBTAB |
| tristate "KB Gear JamStudio tablet support" |
| depends on USB && INPUT |
| help |
| Say Y here if you want to use the USB version of the KB Gear |
| JamStudio tablet. Make sure to say Y to "Mouse support" |
| (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" |
| (CONFIG_INPUT_EVDEV) as well. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called kbtab. |
| |
| config USB_POWERMATE |
| tristate "Griffin PowerMate and Contour Jog support" |
| depends on USB && INPUT |
| ---help--- |
| Say Y here if you want to use Griffin PowerMate or Contour Jog devices. |
| These are aluminum dials which can measure clockwise and anticlockwise |
| rotation. The dial also acts as a pushbutton. The base contains an LED |
| which can be instructed to pulse or to switch to a particular intensity. |
| |
| You can download userspace tools from |
| <http://sowerbutts.com/powermate/>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called powermate. |
| |
| config USB_TOUCHSCREEN |
| tristate "USB Touchscreen Driver" |
| depends on USB && INPUT |
| ---help--- |
| USB Touchscreen driver for: |
| - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700) |
| - PanJit TouchSet USB |
| - 3M MicroTouch USB (EX II series) |
| - ITM |
| - some other eTurboTouch |
| - Gunze AHL61 |
| - DMC TSC-10/25 |
| |
| Have a look at <http://linux.chapter7.ch/touchkit/> for |
| a usage description and the required user-space stuff. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called usbtouchscreen. |
| |
| config USB_TOUCHSCREEN_EGALAX |
| default y |
| bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED |
| depends on USB_TOUCHSCREEN |
| |
| config USB_TOUCHSCREEN_PANJIT |
| default y |
| bool "PanJit device support" if EMBEDDED |
| depends on USB_TOUCHSCREEN |
| |
| config USB_TOUCHSCREEN_3M |
| default y |
| bool "3M/Microtouch EX II series device support" if EMBEDDED |
| depends on USB_TOUCHSCREEN |
| |
| config USB_TOUCHSCREEN_ITM |
| default y |
| bool "ITM device support" if EMBEDDED |
| depends on USB_TOUCHSCREEN |
| |
| config USB_TOUCHSCREEN_ETURBO |
| default y |
| bool "eTurboTouch (non-eGalax compatible) device support" if EMBEDDED |
| depends on USB_TOUCHSCREEN |
| |
| config USB_TOUCHSCREEN_GUNZE |
| default y |
| bool "Gunze AHL61 device support" if EMBEDDED |
| depends on USB_TOUCHSCREEN |
| |
| config USB_TOUCHSCREEN_DMC_TSC10 |
| default y |
| bool "DMC TSC-10/25 device support" if EMBEDDED |
| depends on USB_TOUCHSCREEN |
| |
| config USB_YEALINK |
| tristate "Yealink usb-p1k voip phone" |
| depends on USB && INPUT && EXPERIMENTAL |
| ---help--- |
| Say Y here if you want to enable keyboard and LCD functions of the |
| Yealink usb-p1k usb phones. The audio part is enabled by the generic |
| usb sound driver, so you might want to enable that as well. |
| |
| For information about how to use these additional functions, see |
| <file:Documentation/input/yealink.txt>. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called yealink. |
| |
| config USB_XPAD |
| tristate "X-Box gamepad support" |
| depends on USB && INPUT |
| ---help--- |
| Say Y here if you want to use the X-Box pad with your computer. |
| Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV) |
| and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well. |
| |
| For information about how to connect the X-Box pad to USB, see |
| <file:Documentation/input/xpad.txt>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called xpad. |
| |
| config USB_ATI_REMOTE |
| tristate "ATI / X10 USB RF remote control" |
| depends on USB && INPUT |
| ---help--- |
| Say Y here if you want to use an ATI or X10 "Lola" USB remote control. |
| These are RF remotes with USB receivers. |
| The ATI remote comes with many of ATI's All-In-Wonder video cards. |
| The X10 "Lola" remote is available at: |
| <http://www.x10.com/products/lola_sg1.htm> |
| This driver provides mouse pointer, left and right mouse buttons, |
| and maps all the other remote buttons to keypress events. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ati_remote. |
| |
| config USB_ATI_REMOTE2 |
| tristate "ATI / Philips USB RF remote control" |
| depends on USB && INPUT |
| ---help--- |
| Say Y here if you want to use an ATI or Philips USB RF remote control. |
| These are RF remotes with USB receivers. |
| ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards |
| and is also available as a separate product. |
| This driver provides mouse pointer, left and right mouse buttons, |
| and maps all the other remote buttons to keypress events. |
| |
| To compile this driver as a module, choose M here: the module will be |
| called ati_remote2. |
| |
| config USB_KEYSPAN_REMOTE |
| tristate "Keyspan DMR USB remote control (EXPERIMENTAL)" |
| depends on USB && INPUT && EXPERIMENTAL |
| ---help--- |
| Say Y here if you want to use a Keyspan DMR USB remote control. |
| Currently only the UIA-11 type of receiver has been tested. The tag |
| on the receiver that connects to the USB port should have a P/N that |
| will tell you what type of DMR you have. The UIA-10 type is not |
| supported at this time. This driver maps all buttons to keypress |
| events. |
| |
| To compile this driver as a module, choose M here: the module will |
| be called keyspan_remote. |
| |
| config USB_APPLETOUCH |
| tristate "Apple USB Touchpad support" |
| depends on USB && INPUT |
| ---help--- |
| Say Y here if you want to use an Apple USB Touchpad. |
| |
| These are the touchpads that can be found on post-February 2005 |
| Apple Powerbooks (prior models have a Synaptics touchpad connected |
| to the ADB bus). |
| |
| This driver provides a basic mouse driver but can be interfaced |
| with the synaptics X11 driver to provide acceleration and |
| scrolling in X11. |
| |
| For further information, see |
| <file:Documentation/input/appletouch.txt>. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called appletouch. |
| |
| config USB_GTCO |
| tristate "GTCO CalComp/InterWrite USB Support" |
| depends on USB && INPUT |
| ---help--- |
| Say Y here if you want to use the USB version of the GTCO |
| CalComp/InterWrite Tablet. Make sure to say Y to "Mouse support" |
| (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" |
| (CONFIG_INPUT_EVDEV) as well. |
| |
| To compile this driver as a module, choose M here: the |
| module will be called gtco. |
