| /* |
| * arch/arm/mach-tegra/board-harmony.c |
| * |
| * Copyright (C) 2010 Google, Inc. |
| * Copyright (C) 2011 NVIDIA, Inc. |
| * |
| * This software is licensed under the terms of the GNU General Public |
| * License version 2, as published by the Free Software Foundation, and |
| * may be copied, distributed, and modified under those terms. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/platform_device.h> |
| #include <linux/serial_8250.h> |
| #include <linux/clk.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/pda_power.h> |
| #include <linux/io.h> |
| #include <linux/gpio.h> |
| #include <linux/i2c.h> |
| |
| #include <sound/wm8903.h> |
| |
| #include <asm/mach-types.h> |
| #include <asm/mach/arch.h> |
| #include <asm/mach/time.h> |
| #include <asm/setup.h> |
| |
| #include <mach/tegra_wm8903_pdata.h> |
| #include <mach/iomap.h> |
| #include <mach/irqs.h> |
| #include <mach/sdhci.h> |
| |
| #include "board.h" |
| #include "board-harmony.h" |
| #include "clock.h" |
| #include "devices.h" |
| #include "gpio-names.h" |
| |
| static struct plat_serial8250_port debug_uart_platform_data[] = { |
| { |
| .membase = IO_ADDRESS(TEGRA_UARTD_BASE), |
| .mapbase = TEGRA_UARTD_BASE, |
| .irq = INT_UARTD, |
| .flags = UPF_BOOT_AUTOCONF, |
| .iotype = UPIO_MEM, |
| .regshift = 2, |
| .uartclk = 216000000, |
| }, { |
| .flags = 0 |
| } |
| }; |
| |
| static struct platform_device debug_uart = { |
| .name = "serial8250", |
| .id = PLAT8250_DEV_PLATFORM, |
| .dev = { |
| .platform_data = debug_uart_platform_data, |
| }, |
| }; |
| |
| static struct tegra_wm8903_platform_data harmony_audio_pdata = { |
| .gpio_spkr_en = TEGRA_GPIO_SPKR_EN, |
| .gpio_hp_det = TEGRA_GPIO_HP_DET, |
| .gpio_hp_mute = -1, |
| .gpio_int_mic_en = TEGRA_GPIO_INT_MIC_EN, |
| .gpio_ext_mic_en = TEGRA_GPIO_EXT_MIC_EN, |
| }; |
| |
| static struct platform_device harmony_audio_device = { |
| .name = "tegra-snd-wm8903", |
| .id = 0, |
| .dev = { |
| .platform_data = &harmony_audio_pdata, |
| }, |
| }; |
| |
| static struct wm8903_platform_data harmony_wm8903_pdata = { |
| .irq_active_low = 0, |
| .micdet_cfg = 0, |
| .micdet_delay = 100, |
| .gpio_base = HARMONY_GPIO_WM8903(0), |
| .gpio_cfg = { |
| WM8903_GPIO_NO_CONFIG, |
| WM8903_GPIO_NO_CONFIG, |
| 0, |
| WM8903_GPIO_NO_CONFIG, |
| WM8903_GPIO_NO_CONFIG, |
| }, |
| }; |
| |
| static struct i2c_board_info __initdata wm8903_board_info = { |
| I2C_BOARD_INFO("wm8903", 0x1a), |
| .platform_data = &harmony_wm8903_pdata, |
| .irq = TEGRA_GPIO_TO_IRQ(TEGRA_GPIO_CDC_IRQ), |
| }; |
| |
| static void __init harmony_i2c_init(void) |
| { |
| platform_device_register(&tegra_i2c_device1); |
| platform_device_register(&tegra_i2c_device2); |
| platform_device_register(&tegra_i2c_device3); |
| platform_device_register(&tegra_i2c_device4); |
| |
| i2c_register_board_info(0, &wm8903_board_info, 1); |
| } |
| |
| static struct platform_device *harmony_devices[] __initdata = { |
| &debug_uart, |
| &tegra_sdhci_device1, |
| &tegra_sdhci_device2, |
| &tegra_sdhci_device4, |
| &tegra_i2s_device1, |
| &tegra_das_device, |
| &tegra_pcm_device, |
| &harmony_audio_device, |
| }; |
| |
| static void __init tegra_harmony_fixup(struct tag *tags, char **cmdline, |
| struct meminfo *mi) |
| { |
| mi->nr_banks = 2; |
| mi->bank[0].start = PHYS_OFFSET; |
| mi->bank[0].size = 448 * SZ_1M; |
| mi->bank[1].start = SZ_512M; |
| mi->bank[1].size = SZ_512M; |
| } |
| |
| static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = { |
| /* name parent rate enabled */ |
| { "uartd", "pll_p", 216000000, true }, |
| { "pll_a", "pll_p_out1", 56448000, true }, |
| { "pll_a_out0", "pll_a", 11289600, true }, |
| { "cdev1", NULL, 0, true }, |
| { "i2s1", "pll_a_out0", 11289600, false}, |
| { NULL, NULL, 0, 0}, |
| }; |
| |
| |
| static struct tegra_sdhci_platform_data sdhci_pdata1 = { |
| .cd_gpio = -1, |
| .wp_gpio = -1, |
| .power_gpio = -1, |
| }; |
| |
| static struct tegra_sdhci_platform_data sdhci_pdata2 = { |
| .cd_gpio = TEGRA_GPIO_SD2_CD, |
| .wp_gpio = TEGRA_GPIO_SD2_WP, |
| .power_gpio = TEGRA_GPIO_SD2_POWER, |
| }; |
| |
| static struct tegra_sdhci_platform_data sdhci_pdata4 = { |
| .cd_gpio = TEGRA_GPIO_SD4_CD, |
| .wp_gpio = TEGRA_GPIO_SD4_WP, |
| .power_gpio = TEGRA_GPIO_SD4_POWER, |
| .is_8bit = 1, |
| }; |
| |
| static void __init tegra_harmony_init(void) |
| { |
| tegra_clk_init_from_table(harmony_clk_init_table); |
| |
| harmony_pinmux_init(); |
| |
| tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1; |
| tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2; |
| tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; |
| |
| platform_add_devices(harmony_devices, ARRAY_SIZE(harmony_devices)); |
| harmony_i2c_init(); |
| harmony_regulator_init(); |
| } |
| |
| MACHINE_START(HARMONY, "harmony") |
| .atag_offset = 0x100, |
| .fixup = tegra_harmony_fixup, |
| .map_io = tegra_map_common_io, |
| .init_early = tegra_init_early, |
| .init_irq = tegra_init_irq, |
| .timer = &tegra_timer, |
| .init_machine = tegra_harmony_init, |
| MACHINE_END |