| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright © 2019 Intel Corporation |
| * |
| * Mei_hdcp.c: HDCP client driver for mei bus |
| * |
| * Author: |
| * Ramalingam C <ramalingam.c@intel.com> |
| */ |
| |
| /** |
| * DOC: MEI_HDCP Client Driver |
| * |
| * This is a client driver to the mei_bus to make the HDCP2.2 services of |
| * ME FW available for the interested consumers like I915. |
| * |
| * This module will act as a translation layer between HDCP protocol |
| * implementor(I915) and ME FW by translating HDCP2.2 authentication |
| * messages to ME FW command payloads and vice versa. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/uuid.h> |
| #include <linux/mei_cl_bus.h> |
| #include <linux/component.h> |
| #include <drm/drm_connector.h> |
| #include <drm/i915_component.h> |
| #include <drm/i915_mei_hdcp_interface.h> |
| |
| #include "mei_hdcp.h" |
| |
| static inline u8 mei_get_ddi_index(enum port port) |
| { |
| switch (port) { |
| case PORT_A: |
| return MEI_DDI_A; |
| case PORT_B ... PORT_F: |
| return (u8)port; |
| default: |
| return MEI_DDI_INVALID_PORT; |
| } |
| } |
| |
| /** |
| * mei_hdcp_initiate_session() - Initiate a Wired HDCP2.2 Tx Session in ME FW |
| * @dev: device corresponding to the mei_cl_device |
| * @data: Intel HW specific hdcp data |
| * @ake_data: AKE_Init msg output. |
| * |
| * Return: 0 on Success, <0 on Failure. |
| */ |
| static int |
| mei_hdcp_initiate_session(struct device *dev, struct hdcp_port_data *data, |
| struct hdcp2_ake_init *ake_data) |
| { |
| struct wired_cmd_initiate_hdcp2_session_in session_init_in = { { 0 } }; |
| struct wired_cmd_initiate_hdcp2_session_out |
| session_init_out = { { 0 } }; |
| struct mei_cl_device *cldev; |
| ssize_t byte; |
| |
| if (!dev || !data || !ake_data) |
| return -EINVAL; |
| |
| cldev = to_mei_cl_device(dev); |
| |
| session_init_in.header.api_version = HDCP_API_VERSION; |
| session_init_in.header.command_id = WIRED_INITIATE_HDCP2_SESSION; |
| session_init_in.header.status = ME_HDCP_STATUS_SUCCESS; |
| session_init_in.header.buffer_len = |
| WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN; |
| |
| session_init_in.port.integrated_port_type = data->port_type; |
| session_init_in.port.physical_port = mei_get_ddi_index(data->port); |
| session_init_in.protocol = data->protocol; |
| |
| byte = mei_cldev_send(cldev, (u8 *)&session_init_in, |
| sizeof(session_init_in)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); |
| return byte; |
| } |
| |
| byte = mei_cldev_recv(cldev, (u8 *)&session_init_out, |
| sizeof(session_init_out)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); |
| return byte; |
| } |
| |
| if (session_init_out.header.status != ME_HDCP_STATUS_SUCCESS) { |
| dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", |
| WIRED_INITIATE_HDCP2_SESSION, |
| session_init_out.header.status); |
| return -EIO; |
| } |
| |
| ake_data->msg_id = HDCP_2_2_AKE_INIT; |
| ake_data->tx_caps = session_init_out.tx_caps; |
| memcpy(ake_data->r_tx, session_init_out.r_tx, HDCP_2_2_RTX_LEN); |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hdcp_verify_receiver_cert_prepare_km() - Verify the Receiver Certificate |
| * AKE_Send_Cert and prepare AKE_Stored_Km/AKE_No_Stored_Km |
| * @dev: device corresponding to the mei_cl_device |
| * @data: Intel HW specific hdcp data |
| * @rx_cert: AKE_Send_Cert for verification |
| * @km_stored: Pairing status flag output |
| * @ek_pub_km: AKE_Stored_Km/AKE_No_Stored_Km output msg |
| * @msg_sz : size of AKE_XXXXX_Km output msg |
| * |
| * Return: 0 on Success, <0 on Failure |
| */ |
| static int |
| mei_hdcp_verify_receiver_cert_prepare_km(struct device *dev, |
| struct hdcp_port_data *data, |
| struct hdcp2_ake_send_cert *rx_cert, |
| bool *km_stored, |
| struct hdcp2_ake_no_stored_km |
| *ek_pub_km, |
| size_t *msg_sz) |
| { |
| struct wired_cmd_verify_receiver_cert_in verify_rxcert_in = { { 0 } }; |
| struct wired_cmd_verify_receiver_cert_out verify_rxcert_out = { { 0 } }; |
| struct mei_cl_device *cldev; |
| ssize_t byte; |
| |
| if (!dev || !data || !rx_cert || !km_stored || !ek_pub_km || !msg_sz) |
| return -EINVAL; |
| |
| cldev = to_mei_cl_device(dev); |
| |
| verify_rxcert_in.header.api_version = HDCP_API_VERSION; |
| verify_rxcert_in.header.command_id = WIRED_VERIFY_RECEIVER_CERT; |
| verify_rxcert_in.header.status = ME_HDCP_STATUS_SUCCESS; |
| verify_rxcert_in.header.buffer_len = |
| WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_IN; |
| |
| verify_rxcert_in.port.integrated_port_type = data->port_type; |
| verify_rxcert_in.port.physical_port = mei_get_ddi_index(data->port); |
| |
| verify_rxcert_in.cert_rx = rx_cert->cert_rx; |
| memcpy(verify_rxcert_in.r_rx, &rx_cert->r_rx, HDCP_2_2_RRX_LEN); |
| memcpy(verify_rxcert_in.rx_caps, rx_cert->rx_caps, HDCP_2_2_RXCAPS_LEN); |
| |
| byte = mei_cldev_send(cldev, (u8 *)&verify_rxcert_in, |
| sizeof(verify_rxcert_in)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_send failed: %zd\n", byte); |
| return byte; |
| } |
| |
| byte = mei_cldev_recv(cldev, (u8 *)&verify_rxcert_out, |
| sizeof(verify_rxcert_out)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_recv failed: %zd\n", byte); |
| return byte; |
| } |
| |
| if (verify_rxcert_out.header.status != ME_HDCP_STATUS_SUCCESS) { |
| dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", |
| WIRED_VERIFY_RECEIVER_CERT, |
| verify_rxcert_out.header.status); |
| return -EIO; |
| } |
| |
| *km_stored = !!verify_rxcert_out.km_stored; |
| if (verify_rxcert_out.km_stored) { |
| ek_pub_km->msg_id = HDCP_2_2_AKE_STORED_KM; |
| *msg_sz = sizeof(struct hdcp2_ake_stored_km); |
| } else { |
| ek_pub_km->msg_id = HDCP_2_2_AKE_NO_STORED_KM; |
| *msg_sz = sizeof(struct hdcp2_ake_no_stored_km); |
| } |
| |
| memcpy(ek_pub_km->e_kpub_km, &verify_rxcert_out.ekm_buff, |
| sizeof(verify_rxcert_out.ekm_buff)); |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hdcp_verify_hprime() - Verify AKE_Send_H_prime at ME FW. |
| * @dev: device corresponding to the mei_cl_device |
| * @data: Intel HW specific hdcp data |
| * @rx_hprime: AKE_Send_H_prime msg for ME FW verification |
| * |
| * Return: 0 on Success, <0 on Failure |
| */ |
| static int |
| mei_hdcp_verify_hprime(struct device *dev, struct hdcp_port_data *data, |
| struct hdcp2_ake_send_hprime *rx_hprime) |
| { |
| struct wired_cmd_ake_send_hprime_in send_hprime_in = { { 0 } }; |
| struct wired_cmd_ake_send_hprime_out send_hprime_out = { { 0 } }; |
| struct mei_cl_device *cldev; |
| ssize_t byte; |
| |
| if (!dev || !data || !rx_hprime) |
| return -EINVAL; |
| |
| cldev = to_mei_cl_device(dev); |
| |
| send_hprime_in.header.api_version = HDCP_API_VERSION; |
| send_hprime_in.header.command_id = WIRED_AKE_SEND_HPRIME; |
| send_hprime_in.header.status = ME_HDCP_STATUS_SUCCESS; |
| send_hprime_in.header.buffer_len = WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN; |
| |
| send_hprime_in.port.integrated_port_type = data->port_type; |
| send_hprime_in.port.physical_port = mei_get_ddi_index(data->port); |
| |
| memcpy(send_hprime_in.h_prime, rx_hprime->h_prime, |
| HDCP_2_2_H_PRIME_LEN); |
| |
| byte = mei_cldev_send(cldev, (u8 *)&send_hprime_in, |
| sizeof(send_hprime_in)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); |
| return byte; |
| } |
| |
| byte = mei_cldev_recv(cldev, (u8 *)&send_hprime_out, |
| sizeof(send_hprime_out)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); |
| return byte; |
| } |
| |
| if (send_hprime_out.header.status != ME_HDCP_STATUS_SUCCESS) { |
| dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", |
| WIRED_AKE_SEND_HPRIME, send_hprime_out.header.status); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hdcp_store_pairing_info() - Store pairing info received at ME FW |
| * @dev: device corresponding to the mei_cl_device |
| * @data: Intel HW specific hdcp data |
| * @pairing_info: AKE_Send_Pairing_Info msg input to ME FW |
| * |
| * Return: 0 on Success, <0 on Failure |
| */ |
| static int |
| mei_hdcp_store_pairing_info(struct device *dev, struct hdcp_port_data *data, |
| struct hdcp2_ake_send_pairing_info *pairing_info) |
| { |
| struct wired_cmd_ake_send_pairing_info_in pairing_info_in = { { 0 } }; |
| struct wired_cmd_ake_send_pairing_info_out pairing_info_out = { { 0 } }; |
| struct mei_cl_device *cldev; |
| ssize_t byte; |
| |
| if (!dev || !data || !pairing_info) |
| return -EINVAL; |
| |
| cldev = to_mei_cl_device(dev); |
| |
| pairing_info_in.header.api_version = HDCP_API_VERSION; |
| pairing_info_in.header.command_id = WIRED_AKE_SEND_PAIRING_INFO; |
| pairing_info_in.header.status = ME_HDCP_STATUS_SUCCESS; |
| pairing_info_in.header.buffer_len = |
| WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN; |
| |
| pairing_info_in.port.integrated_port_type = data->port_type; |
| pairing_info_in.port.physical_port = mei_get_ddi_index(data->port); |
| |
| memcpy(pairing_info_in.e_kh_km, pairing_info->e_kh_km, |
| HDCP_2_2_E_KH_KM_LEN); |
| |
| byte = mei_cldev_send(cldev, (u8 *)&pairing_info_in, |
| sizeof(pairing_info_in)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); |
| return byte; |
| } |
| |
| byte = mei_cldev_recv(cldev, (u8 *)&pairing_info_out, |
| sizeof(pairing_info_out)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); |
| return byte; |
| } |
| |
| if (pairing_info_out.header.status != ME_HDCP_STATUS_SUCCESS) { |
| dev_dbg(dev, "ME cmd 0x%08X failed. Status: 0x%X\n", |
| WIRED_AKE_SEND_PAIRING_INFO, |
| pairing_info_out.header.status); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hdcp_initiate_locality_check() - Prepare LC_Init |
| * @dev: device corresponding to the mei_cl_device |
| * @data: Intel HW specific hdcp data |
| * @lc_init_data: LC_Init msg output |
| * |
| * Return: 0 on Success, <0 on Failure |
| */ |
| static int |
| mei_hdcp_initiate_locality_check(struct device *dev, |
| struct hdcp_port_data *data, |
| struct hdcp2_lc_init *lc_init_data) |
| { |
| struct wired_cmd_init_locality_check_in lc_init_in = { { 0 } }; |
| struct wired_cmd_init_locality_check_out lc_init_out = { { 0 } }; |
| struct mei_cl_device *cldev; |
| ssize_t byte; |
| |
| if (!dev || !data || !lc_init_data) |
| return -EINVAL; |
| |
| cldev = to_mei_cl_device(dev); |
| |
| lc_init_in.header.api_version = HDCP_API_VERSION; |
| lc_init_in.header.command_id = WIRED_INIT_LOCALITY_CHECK; |
| lc_init_in.header.status = ME_HDCP_STATUS_SUCCESS; |
| lc_init_in.header.buffer_len = WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_IN; |
| |
| lc_init_in.port.integrated_port_type = data->port_type; |
| lc_init_in.port.physical_port = mei_get_ddi_index(data->port); |
| |
| byte = mei_cldev_send(cldev, (u8 *)&lc_init_in, sizeof(lc_init_in)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); |
| return byte; |
| } |
| |
| byte = mei_cldev_recv(cldev, (u8 *)&lc_init_out, sizeof(lc_init_out)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); |
| return byte; |
| } |
| |
| if (lc_init_out.header.status != ME_HDCP_STATUS_SUCCESS) { |
| dev_dbg(dev, "ME cmd 0x%08X Failed. status: 0x%X\n", |
| WIRED_INIT_LOCALITY_CHECK, lc_init_out.header.status); |
| return -EIO; |
| } |
| |
| lc_init_data->msg_id = HDCP_2_2_LC_INIT; |
| memcpy(lc_init_data->r_n, lc_init_out.r_n, HDCP_2_2_RN_LEN); |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hdcp_verify_lprime() - Verify lprime. |
| * @dev: device corresponding to the mei_cl_device |
| * @data: Intel HW specific hdcp data |
| * @rx_lprime: LC_Send_L_prime msg for ME FW verification |
| * |
| * Return: 0 on Success, <0 on Failure |
| */ |
| static int |
| mei_hdcp_verify_lprime(struct device *dev, struct hdcp_port_data *data, |
| struct hdcp2_lc_send_lprime *rx_lprime) |
| { |
| struct wired_cmd_validate_locality_in verify_lprime_in = { { 0 } }; |
| struct wired_cmd_validate_locality_out verify_lprime_out = { { 0 } }; |
| struct mei_cl_device *cldev; |
| ssize_t byte; |
| |
| if (!dev || !data || !rx_lprime) |
| return -EINVAL; |
| |
| cldev = to_mei_cl_device(dev); |
| |
| verify_lprime_in.header.api_version = HDCP_API_VERSION; |
| verify_lprime_in.header.command_id = WIRED_VALIDATE_LOCALITY; |
| verify_lprime_in.header.status = ME_HDCP_STATUS_SUCCESS; |
| verify_lprime_in.header.buffer_len = |
| WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_IN; |
| |
| verify_lprime_in.port.integrated_port_type = data->port_type; |
| verify_lprime_in.port.physical_port = mei_get_ddi_index(data->port); |
| |
| memcpy(verify_lprime_in.l_prime, rx_lprime->l_prime, |
| HDCP_2_2_L_PRIME_LEN); |
| |
| byte = mei_cldev_send(cldev, (u8 *)&verify_lprime_in, |
| sizeof(verify_lprime_in)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); |
| return byte; |
| } |
| |
| byte = mei_cldev_recv(cldev, (u8 *)&verify_lprime_out, |
| sizeof(verify_lprime_out)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); |
| return byte; |
| } |
| |
| if (verify_lprime_out.header.status != ME_HDCP_STATUS_SUCCESS) { |
| dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", |
| WIRED_VALIDATE_LOCALITY, |
| verify_lprime_out.header.status); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hdcp_get_session_key() - Prepare SKE_Send_Eks. |
| * @dev: device corresponding to the mei_cl_device |
| * @data: Intel HW specific hdcp data |
| * @ske_data: SKE_Send_Eks msg output from ME FW. |
| * |
| * Return: 0 on Success, <0 on Failure |
| */ |
| static int mei_hdcp_get_session_key(struct device *dev, |
| struct hdcp_port_data *data, |
| struct hdcp2_ske_send_eks *ske_data) |
| { |
| struct wired_cmd_get_session_key_in get_skey_in = { { 0 } }; |
| struct wired_cmd_get_session_key_out get_skey_out = { { 0 } }; |
| struct mei_cl_device *cldev; |
| ssize_t byte; |
| |
| if (!dev || !data || !ske_data) |
| return -EINVAL; |
| |
| cldev = to_mei_cl_device(dev); |
| |
| get_skey_in.header.api_version = HDCP_API_VERSION; |
| get_skey_in.header.command_id = WIRED_GET_SESSION_KEY; |
| get_skey_in.header.status = ME_HDCP_STATUS_SUCCESS; |
| get_skey_in.header.buffer_len = WIRED_CMD_BUF_LEN_GET_SESSION_KEY_IN; |
| |
| get_skey_in.port.integrated_port_type = data->port_type; |
| get_skey_in.port.physical_port = mei_get_ddi_index(data->port); |
| |
| byte = mei_cldev_send(cldev, (u8 *)&get_skey_in, sizeof(get_skey_in)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); |
| return byte; |
| } |
| |
| byte = mei_cldev_recv(cldev, (u8 *)&get_skey_out, sizeof(get_skey_out)); |
| |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); |
| return byte; |
| } |
| |
| if (get_skey_out.header.status != ME_HDCP_STATUS_SUCCESS) { |
| dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", |
| WIRED_GET_SESSION_KEY, get_skey_out.header.status); |
| return -EIO; |
| } |
| |
| ske_data->msg_id = HDCP_2_2_SKE_SEND_EKS; |
| memcpy(ske_data->e_dkey_ks, get_skey_out.e_dkey_ks, |
| HDCP_2_2_E_DKEY_KS_LEN); |
| memcpy(ske_data->riv, get_skey_out.r_iv, HDCP_2_2_RIV_LEN); |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hdcp_repeater_check_flow_prepare_ack() - Validate the Downstream topology |
| * and prepare rep_ack. |
| * @dev: device corresponding to the mei_cl_device |
| * @data: Intel HW specific hdcp data |
| * @rep_topology: Receiver ID List to be validated |
| * @rep_send_ack : repeater ack from ME FW. |
| * |
| * Return: 0 on Success, <0 on Failure |
| */ |
| static int |
| mei_hdcp_repeater_check_flow_prepare_ack(struct device *dev, |
| struct hdcp_port_data *data, |
| struct hdcp2_rep_send_receiverid_list |
| *rep_topology, |
| struct hdcp2_rep_send_ack |
| *rep_send_ack) |
| { |
| struct wired_cmd_verify_repeater_in verify_repeater_in = { { 0 } }; |
| struct wired_cmd_verify_repeater_out verify_repeater_out = { { 0 } }; |
| struct mei_cl_device *cldev; |
| ssize_t byte; |
| |
| if (!dev || !rep_topology || !rep_send_ack || !data) |
| return -EINVAL; |
| |
| cldev = to_mei_cl_device(dev); |
| |
| verify_repeater_in.header.api_version = HDCP_API_VERSION; |
| verify_repeater_in.header.command_id = WIRED_VERIFY_REPEATER; |
| verify_repeater_in.header.status = ME_HDCP_STATUS_SUCCESS; |
| verify_repeater_in.header.buffer_len = |
| WIRED_CMD_BUF_LEN_VERIFY_REPEATER_IN; |
| |
| verify_repeater_in.port.integrated_port_type = data->port_type; |
| verify_repeater_in.port.physical_port = mei_get_ddi_index(data->port); |
| |
| memcpy(verify_repeater_in.rx_info, rep_topology->rx_info, |
| HDCP_2_2_RXINFO_LEN); |
| memcpy(verify_repeater_in.seq_num_v, rep_topology->seq_num_v, |
| HDCP_2_2_SEQ_NUM_LEN); |
| memcpy(verify_repeater_in.v_prime, rep_topology->v_prime, |
| HDCP_2_2_V_PRIME_HALF_LEN); |
| memcpy(verify_repeater_in.receiver_ids, rep_topology->receiver_ids, |
| HDCP_2_2_RECEIVER_IDS_MAX_LEN); |
| |
| byte = mei_cldev_send(cldev, (u8 *)&verify_repeater_in, |
| sizeof(verify_repeater_in)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); |
| return byte; |
| } |
| |
| byte = mei_cldev_recv(cldev, (u8 *)&verify_repeater_out, |
| sizeof(verify_repeater_out)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); |
| return byte; |
| } |
| |
| if (verify_repeater_out.header.status != ME_HDCP_STATUS_SUCCESS) { |
| dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", |
| WIRED_VERIFY_REPEATER, |
| verify_repeater_out.header.status); |
| return -EIO; |
| } |
| |
| memcpy(rep_send_ack->v, verify_repeater_out.v, |
| HDCP_2_2_V_PRIME_HALF_LEN); |
| rep_send_ack->msg_id = HDCP_2_2_REP_SEND_ACK; |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hdcp_verify_mprime() - Verify mprime. |
| * @dev: device corresponding to the mei_cl_device |
| * @data: Intel HW specific hdcp data |
| * @stream_ready: RepeaterAuth_Stream_Ready msg for ME FW verification. |
| * |
| * Return: 0 on Success, <0 on Failure |
| */ |
| static int mei_hdcp_verify_mprime(struct device *dev, |
| struct hdcp_port_data *data, |
| struct hdcp2_rep_stream_ready *stream_ready) |
| { |
| struct wired_cmd_repeater_auth_stream_req_in |
| verify_mprime_in = { { 0 } }; |
| struct wired_cmd_repeater_auth_stream_req_out |
| verify_mprime_out = { { 0 } }; |
| struct mei_cl_device *cldev; |
| ssize_t byte; |
| |
| if (!dev || !stream_ready || !data) |
| return -EINVAL; |
| |
| cldev = to_mei_cl_device(dev); |
| |
| verify_mprime_in.header.api_version = HDCP_API_VERSION; |
| verify_mprime_in.header.command_id = WIRED_REPEATER_AUTH_STREAM_REQ; |
| verify_mprime_in.header.status = ME_HDCP_STATUS_SUCCESS; |
| verify_mprime_in.header.buffer_len = |
| WIRED_CMD_BUF_LEN_REPEATER_AUTH_STREAM_REQ_MIN_IN; |
| |
| verify_mprime_in.port.integrated_port_type = data->port_type; |
| verify_mprime_in.port.physical_port = mei_get_ddi_index(data->port); |
| |
| memcpy(verify_mprime_in.m_prime, stream_ready->m_prime, |
| HDCP_2_2_MPRIME_LEN); |
| drm_hdcp2_u32_to_seq_num(verify_mprime_in.seq_num_m, data->seq_num_m); |
| memcpy(verify_mprime_in.streams, data->streams, |
| (data->k * sizeof(struct hdcp2_streamid_type))); |
| |
| verify_mprime_in.k = cpu_to_be16(data->k); |
| |
| byte = mei_cldev_send(cldev, (u8 *)&verify_mprime_in, |
| sizeof(verify_mprime_in)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); |
| return byte; |
| } |
| |
| byte = mei_cldev_recv(cldev, (u8 *)&verify_mprime_out, |
| sizeof(verify_mprime_out)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); |
| return byte; |
| } |
| |
| if (verify_mprime_out.header.status != ME_HDCP_STATUS_SUCCESS) { |
| dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", |
| WIRED_REPEATER_AUTH_STREAM_REQ, |
| verify_mprime_out.header.status); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hdcp_enable_authentication() - Mark a port as authenticated |
| * through ME FW |
| * @dev: device corresponding to the mei_cl_device |
| * @data: Intel HW specific hdcp data |
| * |
| * Return: 0 on Success, <0 on Failure |
| */ |
| static int mei_hdcp_enable_authentication(struct device *dev, |
| struct hdcp_port_data *data) |
| { |
| struct wired_cmd_enable_auth_in enable_auth_in = { { 0 } }; |
| struct wired_cmd_enable_auth_out enable_auth_out = { { 0 } }; |
| struct mei_cl_device *cldev; |
| ssize_t byte; |
| |
| if (!dev || !data) |
| return -EINVAL; |
| |
| cldev = to_mei_cl_device(dev); |
| |
| enable_auth_in.header.api_version = HDCP_API_VERSION; |
| enable_auth_in.header.command_id = WIRED_ENABLE_AUTH; |
| enable_auth_in.header.status = ME_HDCP_STATUS_SUCCESS; |
| enable_auth_in.header.buffer_len = WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN; |
| |
| enable_auth_in.port.integrated_port_type = data->port_type; |
| enable_auth_in.port.physical_port = mei_get_ddi_index(data->port); |
| enable_auth_in.stream_type = data->streams[0].stream_type; |
| |
| byte = mei_cldev_send(cldev, (u8 *)&enable_auth_in, |
| sizeof(enable_auth_in)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); |
| return byte; |
| } |
| |
| byte = mei_cldev_recv(cldev, (u8 *)&enable_auth_out, |
| sizeof(enable_auth_out)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); |
| return byte; |
| } |
| |
| if (enable_auth_out.header.status != ME_HDCP_STATUS_SUCCESS) { |
| dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", |
| WIRED_ENABLE_AUTH, enable_auth_out.header.status); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * mei_hdcp_close_session() - Close the Wired HDCP Tx session of ME FW per port. |
| * This also disables the authenticated state of the port. |
| * @dev: device corresponding to the mei_cl_device |
| * @data: Intel HW specific hdcp data |
| * |
| * Return: 0 on Success, <0 on Failure |
| */ |
| static int |
| mei_hdcp_close_session(struct device *dev, struct hdcp_port_data *data) |
| { |
| struct wired_cmd_close_session_in session_close_in = { { 0 } }; |
| struct wired_cmd_close_session_out session_close_out = { { 0 } }; |
| struct mei_cl_device *cldev; |
| ssize_t byte; |
| |
| if (!dev || !data) |
| return -EINVAL; |
| |
| cldev = to_mei_cl_device(dev); |
| |
| session_close_in.header.api_version = HDCP_API_VERSION; |
| session_close_in.header.command_id = WIRED_CLOSE_SESSION; |
| session_close_in.header.status = ME_HDCP_STATUS_SUCCESS; |
| session_close_in.header.buffer_len = |
| WIRED_CMD_BUF_LEN_CLOSE_SESSION_IN; |
| |
| session_close_in.port.integrated_port_type = data->port_type; |
| session_close_in.port.physical_port = mei_get_ddi_index(data->port); |
| |
| byte = mei_cldev_send(cldev, (u8 *)&session_close_in, |
| sizeof(session_close_in)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); |
| return byte; |
| } |
| |
| byte = mei_cldev_recv(cldev, (u8 *)&session_close_out, |
| sizeof(session_close_out)); |
| if (byte < 0) { |
| dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); |
| return byte; |
| } |
| |
| if (session_close_out.header.status != ME_HDCP_STATUS_SUCCESS) { |
| dev_dbg(dev, "Session Close Failed. status: 0x%X\n", |
| session_close_out.header.status); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static const struct i915_hdcp_component_ops mei_hdcp_ops = { |
| .owner = THIS_MODULE, |
| .initiate_hdcp2_session = mei_hdcp_initiate_session, |
| .verify_receiver_cert_prepare_km = |
| mei_hdcp_verify_receiver_cert_prepare_km, |
| .verify_hprime = mei_hdcp_verify_hprime, |
| .store_pairing_info = mei_hdcp_store_pairing_info, |
| .initiate_locality_check = mei_hdcp_initiate_locality_check, |
| .verify_lprime = mei_hdcp_verify_lprime, |
| .get_session_key = mei_hdcp_get_session_key, |
| .repeater_check_flow_prepare_ack = |
| mei_hdcp_repeater_check_flow_prepare_ack, |
| .verify_mprime = mei_hdcp_verify_mprime, |
| .enable_hdcp_authentication = mei_hdcp_enable_authentication, |
| .close_hdcp_session = mei_hdcp_close_session, |
| }; |
| |
| static int mei_component_master_bind(struct device *dev) |
| { |
| struct mei_cl_device *cldev = to_mei_cl_device(dev); |
| struct i915_hdcp_comp_master *comp_master = |
| mei_cldev_get_drvdata(cldev); |
| int ret; |
| |
| dev_dbg(dev, "%s\n", __func__); |
| comp_master->ops = &mei_hdcp_ops; |
| comp_master->mei_dev = dev; |
| ret = component_bind_all(dev, comp_master); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static void mei_component_master_unbind(struct device *dev) |
| { |
| struct mei_cl_device *cldev = to_mei_cl_device(dev); |
| struct i915_hdcp_comp_master *comp_master = |
| mei_cldev_get_drvdata(cldev); |
| |
| dev_dbg(dev, "%s\n", __func__); |
| component_unbind_all(dev, comp_master); |
| } |
| |
| static const struct component_master_ops mei_component_master_ops = { |
| .bind = mei_component_master_bind, |
| .unbind = mei_component_master_unbind, |
| }; |
| |
| static int mei_hdcp_component_match(struct device *dev, int subcomponent, |
| void *data) |
| { |
| return !strcmp(dev->driver->name, "i915") && |
| subcomponent == I915_COMPONENT_HDCP; |
| } |
| |
| static int mei_hdcp_probe(struct mei_cl_device *cldev, |
| const struct mei_cl_device_id *id) |
| { |
| struct i915_hdcp_comp_master *comp_master; |
| struct component_match *master_match; |
| int ret; |
| |
| ret = mei_cldev_enable(cldev); |
| if (ret < 0) { |
| dev_err(&cldev->dev, "mei_cldev_enable Failed. %d\n", ret); |
| goto enable_err_exit; |
| } |
| |
| comp_master = kzalloc(sizeof(*comp_master), GFP_KERNEL); |
| if (!comp_master) { |
| ret = -ENOMEM; |
| goto err_exit; |
| } |
| |
| master_match = NULL; |
| component_match_add_typed(&cldev->dev, &master_match, |
| mei_hdcp_component_match, comp_master); |
| if (IS_ERR_OR_NULL(master_match)) { |
| ret = -ENOMEM; |
| goto err_exit; |
| } |
| |
| mei_cldev_set_drvdata(cldev, comp_master); |
| ret = component_master_add_with_match(&cldev->dev, |
| &mei_component_master_ops, |
| master_match); |
| if (ret < 0) { |
| dev_err(&cldev->dev, "Master comp add failed %d\n", ret); |
| goto err_exit; |
| } |
| |
| return 0; |
| |
| err_exit: |
| mei_cldev_set_drvdata(cldev, NULL); |
| kfree(comp_master); |
| mei_cldev_disable(cldev); |
| enable_err_exit: |
| return ret; |
| } |
| |
| static int mei_hdcp_remove(struct mei_cl_device *cldev) |
| { |
| struct i915_hdcp_comp_master *comp_master = |
| mei_cldev_get_drvdata(cldev); |
| |
| component_master_del(&cldev->dev, &mei_component_master_ops); |
| kfree(comp_master); |
| mei_cldev_set_drvdata(cldev, NULL); |
| |
| return mei_cldev_disable(cldev); |
| } |
| |
| #define MEI_UUID_HDCP GUID_INIT(0xB638AB7E, 0x94E2, 0x4EA2, 0xA5, \ |
| 0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04) |
| |
| static struct mei_cl_device_id mei_hdcp_tbl[] = { |
| { .uuid = MEI_UUID_HDCP, .version = MEI_CL_VERSION_ANY }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(mei, mei_hdcp_tbl); |
| |
| static struct mei_cl_driver mei_hdcp_driver = { |
| .id_table = mei_hdcp_tbl, |
| .name = KBUILD_MODNAME, |
| .probe = mei_hdcp_probe, |
| .remove = mei_hdcp_remove, |
| }; |
| |
| module_mei_cl_driver(mei_hdcp_driver); |
| |
| MODULE_AUTHOR("Intel Corporation"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("MEI HDCP"); |