| // SPDX-License-Identifier: GPL-2.0-only |
| // |
| // DA9121 Single-channel dual-phase 10A buck converter |
| // |
| // Copyright (C) 2020 Axis Communications AB |
| // |
| // DA9130 Single-channel dual-phase 10A buck converter (Automotive) |
| // DA9217 Single-channel dual-phase 6A buck converter |
| // DA9122 Dual-channel single-phase 5A buck converter |
| // DA9131 Dual-channel single-phase 5A buck converter (Automotive) |
| // DA9220 Dual-channel single-phase 3A buck converter |
| // DA9132 Dual-channel single-phase 3A buck converter (Automotive) |
| // |
| // Copyright (C) 2020 Dialog Semiconductor |
| |
| #include <linux/of_device.h> |
| #include <linux/of_gpio.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/module.h> |
| #include <linux/regmap.h> |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/regulator/da9121.h> |
| #include <linux/interrupt.h> |
| #include <linux/workqueue.h> |
| |
| #include "da9121-regulator.h" |
| |
| /* Chip data */ |
| struct da9121 { |
| struct device *dev; |
| struct delayed_work work; |
| struct da9121_pdata *pdata; |
| struct regmap *regmap; |
| struct regulator_dev *rdev[DA9121_IDX_MAX]; |
| unsigned int persistent[2]; |
| unsigned int passive_delay; |
| int chip_irq; |
| int variant_id; |
| int subvariant_id; |
| }; |
| |
| /* Define ranges for different variants, enabling translation to/from |
| * registers. Maximums give scope to allow for transients. |
| */ |
| struct da9121_range { |
| int val_min; |
| int val_max; |
| int val_stp; |
| int reg_min; |
| int reg_max; |
| }; |
| |
| static struct da9121_range da9121_10A_2phase_current = { |
| .val_min = 7000000, |
| .val_max = 20000000, |
| .val_stp = 1000000, |
| .reg_min = 1, |
| .reg_max = 14, |
| }; |
| |
| static struct da9121_range da9121_6A_2phase_current = { |
| .val_min = 7000000, |
| .val_max = 12000000, |
| .val_stp = 1000000, |
| .reg_min = 1, |
| .reg_max = 6, |
| }; |
| |
| static struct da9121_range da9121_5A_1phase_current = { |
| .val_min = 3500000, |
| .val_max = 10000000, |
| .val_stp = 500000, |
| .reg_min = 1, |
| .reg_max = 14, |
| }; |
| |
| static struct da9121_range da9121_3A_1phase_current = { |
| .val_min = 3500000, |
| .val_max = 6000000, |
| .val_stp = 500000, |
| .reg_min = 1, |
| .reg_max = 6, |
| }; |
| |
| static struct da9121_range da914x_40A_4phase_current = { |
| .val_min = 26000000, |
| .val_max = 78000000, |
| .val_stp = 4000000, |
| .reg_min = 1, |
| .reg_max = 14, |
| }; |
| |
| static struct da9121_range da914x_20A_2phase_current = { |
| .val_min = 13000000, |
| .val_max = 39000000, |
| .val_stp = 2000000, |
| .reg_min = 1, |
| .reg_max = 14, |
| }; |
| |
| struct da9121_variant_info { |
| int num_bucks; |
| int num_phases; |
| struct da9121_range *current_range; |
| }; |
| |
| static const struct da9121_variant_info variant_parameters[] = { |
| { 1, 2, &da9121_10A_2phase_current }, //DA9121_TYPE_DA9121_DA9130 |
| { 2, 1, &da9121_3A_1phase_current }, //DA9121_TYPE_DA9220_DA9132 |
| { 2, 1, &da9121_5A_1phase_current }, //DA9121_TYPE_DA9122_DA9131 |
| { 1, 2, &da9121_6A_2phase_current }, //DA9121_TYPE_DA9217 |
| { 1, 4, &da914x_40A_4phase_current }, //DA9121_TYPE_DA9141 |
| { 1, 2, &da914x_20A_2phase_current }, //DA9121_TYPE_DA9142 |
| }; |
| |
| struct da9121_field { |
| unsigned int reg; |
| unsigned int msk; |
| }; |
| |
| static const struct da9121_field da9121_current_field[2] = { |
| { DA9121_REG_BUCK_BUCK1_2, DA9121_MASK_BUCK_BUCKx_2_CHx_ILIM }, |
| { DA9xxx_REG_BUCK_BUCK2_2, DA9121_MASK_BUCK_BUCKx_2_CHx_ILIM }, |
| }; |
| |
| static const struct da9121_field da9121_mode_field[2] = { |
| { DA9121_REG_BUCK_BUCK1_4, DA9121_MASK_BUCK_BUCKx_4_CHx_A_MODE }, |
| { DA9xxx_REG_BUCK_BUCK2_4, DA9121_MASK_BUCK_BUCKx_4_CHx_A_MODE }, |
| }; |
| |
| struct status_event_data { |
| int buck_id; /* 0=core, 1/2-buck */ |
| int reg_index; /* index for status/event/mask register selection */ |
| int status_bit; /* bit masks... */ |
| int event_bit; |
| int mask_bit; |
| unsigned long notification; /* Notification for status inception */ |
| char *warn; /* if NULL, notify - otherwise dev_warn this string */ |
| }; |
| |
| #define DA9121_STATUS(id, bank, name, notification, warning) \ |
| { id, bank, \ |
| DA9121_MASK_SYS_STATUS_##bank##_##name, \ |
| DA9121_MASK_SYS_EVENT_##bank##_E_##name, \ |
| DA9121_MASK_SYS_MASK_##bank##_M_##name, \ |
| notification, warning } |
| |
| /* For second buck related event bits that are specific to DA9122, DA9220 variants */ |
| #define DA9xxx_STATUS(id, bank, name, notification, warning) \ |
| { id, bank, \ |
| DA9xxx_MASK_SYS_STATUS_##bank##_##name, \ |
| DA9xxx_MASK_SYS_EVENT_##bank##_E_##name, \ |
| DA9xxx_MASK_SYS_MASK_##bank##_M_##name, \ |
| notification, warning } |
| |
| /* The status signals that may need servicing, depending on device variant. |
| * After assertion, they persist; so event is notified, the IRQ disabled, |
| * and status polled until clear again and IRQ is reenabled. |
| * |
| * SG/PG1/PG2 should be set when device first powers up and should never |
| * re-occur. When this driver starts, it is expected that these will have |
| * self-cleared for when the IRQs are enabled, so these should never be seen. |
| * If seen, the implication is that the device has reset. |
| * |
| * GPIO0/1/2 are not configured for use by default, so should not be seen. |
| */ |
| static const struct status_event_data status_event_handling[] = { |
| DA9xxx_STATUS(0, 0, SG, 0, "Handled E_SG\n"), |
| DA9121_STATUS(0, 0, TEMP_CRIT, (REGULATOR_EVENT_OVER_TEMP|REGULATOR_EVENT_DISABLE), NULL), |
| DA9121_STATUS(0, 0, TEMP_WARN, REGULATOR_EVENT_OVER_TEMP, NULL), |
| DA9121_STATUS(1, 1, PG1, 0, "Handled E_PG1\n"), |
| DA9121_STATUS(1, 1, OV1, REGULATOR_EVENT_REGULATION_OUT, NULL), |
| DA9121_STATUS(1, 1, UV1, REGULATOR_EVENT_UNDER_VOLTAGE, NULL), |
| DA9121_STATUS(1, 1, OC1, REGULATOR_EVENT_OVER_CURRENT, NULL), |
| DA9xxx_STATUS(2, 1, PG2, 0, "Handled E_PG2\n"), |
| DA9xxx_STATUS(2, 1, OV2, REGULATOR_EVENT_REGULATION_OUT, NULL), |
| DA9xxx_STATUS(2, 1, UV2, REGULATOR_EVENT_UNDER_VOLTAGE, NULL), |
| DA9xxx_STATUS(2, 1, OC2, REGULATOR_EVENT_OVER_CURRENT, NULL), |
| DA9121_STATUS(0, 2, GPIO0, 0, "Handled E_GPIO0\n"), |
| DA9121_STATUS(0, 2, GPIO1, 0, "Handled E_GPIO1\n"), |
| DA9121_STATUS(0, 2, GPIO2, 0, "Handled E_GPIO2\n"), |
| }; |
| |
| static int da9121_get_current_limit(struct regulator_dev *rdev) |
| { |
| struct da9121 *chip = rdev_get_drvdata(rdev); |
| int id = rdev_get_id(rdev); |
| struct da9121_range *range = |
| variant_parameters[chip->variant_id].current_range; |
| unsigned int val = 0; |
| int ret = 0; |
| |
| ret = regmap_read(chip->regmap, da9121_current_field[id].reg, &val); |
| if (ret < 0) { |
| dev_err(chip->dev, "Cannot read BUCK register: %d\n", ret); |
| goto error; |
| } |
| |
| if (val < range->reg_min) { |
| ret = -EACCES; |
| goto error; |
| } |
| |
| if (val > range->reg_max) { |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| return range->val_min + (range->val_stp * (val - range->reg_min)); |
| error: |
| return ret; |
| } |
| |
| static int da9121_ceiling_selector(struct regulator_dev *rdev, |
| int min, int max, |
| unsigned int *selector) |
| { |
| struct da9121 *chip = rdev_get_drvdata(rdev); |
| struct da9121_range *range = |
| variant_parameters[chip->variant_id].current_range; |
| unsigned int level; |
| unsigned int i = 0; |
| unsigned int sel = 0; |
| int ret = 0; |
| |
| if (range->val_min > max || range->val_max < min) { |
| dev_err(chip->dev, |
| "Requested current out of regulator capability\n"); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| level = range->val_max; |
| for (i = range->reg_max; i >= range->reg_min; i--) { |
| if (level <= max) { |
| sel = i; |
| break; |
| } |
| level -= range->val_stp; |
| } |
| |
| if (level < min) { |
| dev_err(chip->dev, |
| "Best match falls below minimum requested current\n"); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| *selector = sel; |
| error: |
| return ret; |
| } |
| |
| static int da9121_set_current_limit(struct regulator_dev *rdev, |
| int min_ua, int max_ua) |
| { |
| struct da9121 *chip = rdev_get_drvdata(rdev); |
| int id = rdev_get_id(rdev); |
| struct da9121_range *range = |
| variant_parameters[chip->variant_id].current_range; |
| unsigned int sel = 0; |
| int ret = 0; |
| |
| if (min_ua < range->val_min || |
| max_ua > range->val_max) { |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| if (rdev->desc->ops->is_enabled(rdev)) { |
| ret = -EBUSY; |
| goto error; |
| } |
| |
| ret = da9121_ceiling_selector(rdev, min_ua, max_ua, &sel); |
| if (ret < 0) |
| goto error; |
| |
| ret = regmap_update_bits(chip->regmap, |
| da9121_current_field[id].reg, |
| da9121_current_field[id].msk, |
| (unsigned int)sel); |
| if (ret < 0) |
| dev_err(chip->dev, "Cannot update BUCK current limit, err: %d\n", ret); |
| |
| error: |
| return ret; |
| } |
| |
| static unsigned int da9121_map_mode(unsigned int mode) |
| { |
| switch (mode) { |
| case DA9121_BUCK_MODE_FORCE_PWM: |
| return REGULATOR_MODE_FAST; |
| case DA9121_BUCK_MODE_FORCE_PWM_SHEDDING: |
| return REGULATOR_MODE_NORMAL; |
| case DA9121_BUCK_MODE_AUTO: |
| return REGULATOR_MODE_IDLE; |
| case DA9121_BUCK_MODE_FORCE_PFM: |
| return REGULATOR_MODE_STANDBY; |
| default: |
| return REGULATOR_MODE_INVALID; |
| } |
| } |
| |
| static int da9121_buck_set_mode(struct regulator_dev *rdev, unsigned int mode) |
| { |
| struct da9121 *chip = rdev_get_drvdata(rdev); |
| int id = rdev_get_id(rdev); |
| unsigned int val; |
| |
| switch (mode) { |
| case REGULATOR_MODE_FAST: |
| val = DA9121_BUCK_MODE_FORCE_PWM; |
| break; |
| case REGULATOR_MODE_NORMAL: |
| val = DA9121_BUCK_MODE_FORCE_PWM_SHEDDING; |
| break; |
| case REGULATOR_MODE_IDLE: |
| val = DA9121_BUCK_MODE_AUTO; |
| break; |
| case REGULATOR_MODE_STANDBY: |
| val = DA9121_BUCK_MODE_FORCE_PFM; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| return regmap_update_bits(chip->regmap, |
| da9121_mode_field[id].reg, |
| da9121_mode_field[id].msk, |
| val); |
| } |
| |
| static unsigned int da9121_buck_get_mode(struct regulator_dev *rdev) |
| { |
| struct da9121 *chip = rdev_get_drvdata(rdev); |
| int id = rdev_get_id(rdev); |
| unsigned int val, mode; |
| int ret = 0; |
| |
| ret = regmap_read(chip->regmap, da9121_mode_field[id].reg, &val); |
| if (ret < 0) { |
| dev_err(chip->dev, "Cannot read BUCK register: %d\n", ret); |
| return -EINVAL; |
| } |
| |
| mode = da9121_map_mode(val & da9121_mode_field[id].msk); |
| if (mode == REGULATOR_MODE_INVALID) |
| return -EINVAL; |
| |
| return mode; |
| } |
| |
| static const struct regulator_ops da9121_buck_ops = { |
| .enable = regulator_enable_regmap, |
| .disable = regulator_disable_regmap, |
| .is_enabled = regulator_is_enabled_regmap, |
| .set_voltage_sel = regulator_set_voltage_sel_regmap, |
| .get_voltage_sel = regulator_get_voltage_sel_regmap, |
| .list_voltage = regulator_list_voltage_linear, |
| .get_current_limit = da9121_get_current_limit, |
| .set_current_limit = da9121_set_current_limit, |
| .set_mode = da9121_buck_set_mode, |
| .get_mode = da9121_buck_get_mode, |
| }; |
| |
| static struct of_regulator_match da9121_matches[] = { |
| [DA9121_IDX_BUCK1] = { .name = "buck1" }, |
| [DA9121_IDX_BUCK2] = { .name = "buck2" }, |
| }; |
| |
| static int da9121_of_parse_cb(struct device_node *np, |
| const struct regulator_desc *desc, |
| struct regulator_config *config) |
| { |
| struct da9121 *chip = config->driver_data; |
| struct da9121_pdata *pdata; |
| struct gpio_desc *ena_gpiod; |
| |
| if (chip->pdata == NULL) { |
| pdata = devm_kzalloc(chip->dev, sizeof(*pdata), GFP_KERNEL); |
| if (!pdata) |
| return -ENOMEM; |
| } else { |
| pdata = chip->pdata; |
| } |
| |
| pdata->num_buck++; |
| |
| if (pdata->num_buck > variant_parameters[chip->variant_id].num_bucks) { |
| dev_err(chip->dev, "Error: excessive regulators for device\n"); |
| return -ENODEV; |
| } |
| |
| ena_gpiod = fwnode_gpiod_get_index(of_fwnode_handle(np), "enable", 0, |
| GPIOD_OUT_HIGH | |
| GPIOD_FLAGS_BIT_NONEXCLUSIVE, |
| "da9121-enable"); |
| if (!IS_ERR(ena_gpiod)) |
| config->ena_gpiod = ena_gpiod; |
| |
| if (variant_parameters[chip->variant_id].num_bucks == 2) { |
| uint32_t ripple_cancel; |
| uint32_t ripple_reg; |
| int ret; |
| |
| if (of_property_read_u32(da9121_matches[pdata->num_buck-1].of_node, |
| "dlg,ripple-cancel", &ripple_cancel)) { |
| if (pdata->num_buck > 1) |
| ripple_reg = DA9xxx_REG_BUCK_BUCK2_7; |
| else |
| ripple_reg = DA9121_REG_BUCK_BUCK1_7; |
| |
| ret = regmap_update_bits(chip->regmap, ripple_reg, |
| DA9xxx_MASK_BUCK_BUCKx_7_CHx_RIPPLE_CANCEL, |
| ripple_cancel); |
| if (ret < 0) |
| dev_err(chip->dev, "Cannot set ripple mode, err: %d\n", ret); |
| } |
| } |
| |
| return 0; |
| } |
| |
| #define DA9121_MIN_MV 300 |
| #define DA9121_MAX_MV 1900 |
| #define DA9121_STEP_MV 10 |
| #define DA9121_MIN_SEL (DA9121_MIN_MV / DA9121_STEP_MV) |
| #define DA9121_N_VOLTAGES (((DA9121_MAX_MV - DA9121_MIN_MV) / DA9121_STEP_MV) \ |
| + 1 + DA9121_MIN_SEL) |
| |
| static const struct regulator_desc da9121_reg = { |
| .id = DA9121_IDX_BUCK1, |
| .name = "da9121", |
| .of_match = "buck1", |
| .of_parse_cb = da9121_of_parse_cb, |
| .owner = THIS_MODULE, |
| .regulators_node = of_match_ptr("regulators"), |
| .of_map_mode = da9121_map_mode, |
| .ops = &da9121_buck_ops, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = DA9121_N_VOLTAGES, |
| .min_uV = DA9121_MIN_MV * 1000, |
| .uV_step = DA9121_STEP_MV * 1000, |
| .linear_min_sel = DA9121_MIN_SEL, |
| .vsel_reg = DA9121_REG_BUCK_BUCK1_5, |
| .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, |
| .enable_reg = DA9121_REG_BUCK_BUCK1_0, |
| .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, |
| /* Default value of BUCK_BUCK1_0.CH1_SRC_DVC_UP */ |
| .ramp_delay = 20000, |
| /* tBUCK_EN */ |
| .enable_time = 20, |
| }; |
| |
| static const struct regulator_desc da9220_reg[2] = { |
| { |
| .id = DA9121_IDX_BUCK1, |
| .name = "DA9220/DA9132 BUCK1", |
| .of_match = "buck1", |
| .of_parse_cb = da9121_of_parse_cb, |
| .owner = THIS_MODULE, |
| .regulators_node = of_match_ptr("regulators"), |
| .of_map_mode = da9121_map_mode, |
| .ops = &da9121_buck_ops, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = DA9121_N_VOLTAGES, |
| .min_uV = DA9121_MIN_MV * 1000, |
| .uV_step = DA9121_STEP_MV * 1000, |
| .linear_min_sel = DA9121_MIN_SEL, |
| .enable_reg = DA9121_REG_BUCK_BUCK1_0, |
| .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, |
| .vsel_reg = DA9121_REG_BUCK_BUCK1_5, |
| .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, |
| }, |
| { |
| .id = DA9121_IDX_BUCK2, |
| .name = "DA9220/DA9132 BUCK2", |
| .of_match = "buck2", |
| .of_parse_cb = da9121_of_parse_cb, |
| .owner = THIS_MODULE, |
| .regulators_node = of_match_ptr("regulators"), |
| .of_map_mode = da9121_map_mode, |
| .ops = &da9121_buck_ops, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = DA9121_N_VOLTAGES, |
| .min_uV = DA9121_MIN_MV * 1000, |
| .uV_step = DA9121_STEP_MV * 1000, |
| .linear_min_sel = DA9121_MIN_SEL, |
| .enable_reg = DA9xxx_REG_BUCK_BUCK2_0, |
| .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, |
| .vsel_reg = DA9xxx_REG_BUCK_BUCK2_5, |
| .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, |
| } |
| }; |
| |
| static const struct regulator_desc da9122_reg[2] = { |
| { |
| .id = DA9121_IDX_BUCK1, |
| .name = "DA9122/DA9131 BUCK1", |
| .of_match = "buck1", |
| .of_parse_cb = da9121_of_parse_cb, |
| .owner = THIS_MODULE, |
| .regulators_node = of_match_ptr("regulators"), |
| .of_map_mode = da9121_map_mode, |
| .ops = &da9121_buck_ops, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = DA9121_N_VOLTAGES, |
| .min_uV = DA9121_MIN_MV * 1000, |
| .uV_step = DA9121_STEP_MV * 1000, |
| .linear_min_sel = DA9121_MIN_SEL, |
| .enable_reg = DA9121_REG_BUCK_BUCK1_0, |
| .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, |
| .vsel_reg = DA9121_REG_BUCK_BUCK1_5, |
| .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, |
| }, |
| { |
| .id = DA9121_IDX_BUCK2, |
| .name = "DA9122/DA9131 BUCK2", |
| .of_match = "buck2", |
| .of_parse_cb = da9121_of_parse_cb, |
| .owner = THIS_MODULE, |
| .regulators_node = of_match_ptr("regulators"), |
| .of_map_mode = da9121_map_mode, |
| .ops = &da9121_buck_ops, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = DA9121_N_VOLTAGES, |
| .min_uV = DA9121_MIN_MV * 1000, |
| .uV_step = DA9121_STEP_MV * 1000, |
| .linear_min_sel = DA9121_MIN_SEL, |
| .enable_reg = DA9xxx_REG_BUCK_BUCK2_0, |
| .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, |
| .vsel_reg = DA9xxx_REG_BUCK_BUCK2_5, |
| .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, |
| } |
| }; |
| |
| static const struct regulator_desc da9217_reg = { |
| .id = DA9121_IDX_BUCK1, |
| .name = "DA9217 BUCK1", |
| .of_match = "buck1", |
| .of_parse_cb = da9121_of_parse_cb, |
| .owner = THIS_MODULE, |
| .regulators_node = of_match_ptr("regulators"), |
| .of_map_mode = da9121_map_mode, |
| .ops = &da9121_buck_ops, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = DA9121_N_VOLTAGES, |
| .min_uV = DA9121_MIN_MV * 1000, |
| .uV_step = DA9121_STEP_MV * 1000, |
| .linear_min_sel = DA9121_MIN_SEL, |
| .enable_reg = DA9121_REG_BUCK_BUCK1_0, |
| .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, |
| .vsel_reg = DA9121_REG_BUCK_BUCK1_5, |
| .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, |
| }; |
| |
| #define DA914X_MIN_MV 500 |
| #define DA914X_MAX_MV 1300 |
| #define DA914X_STEP_MV 10 |
| #define DA914X_MIN_SEL (DA914X_MIN_MV / DA914X_STEP_MV) |
| #define DA914X_N_VOLTAGES (((DA914X_MAX_MV - DA914X_MIN_MV) / DA914X_STEP_MV) \ |
| + 1 + DA914X_MIN_SEL) |
| |
| static const struct regulator_desc da9141_reg = { |
| .id = DA9121_IDX_BUCK1, |
| .name = "DA9141", |
| .of_match = "buck1", |
| .of_parse_cb = da9121_of_parse_cb, |
| .owner = THIS_MODULE, |
| .regulators_node = of_match_ptr("regulators"), |
| .of_map_mode = da9121_map_mode, |
| .ops = &da9121_buck_ops, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = DA914X_N_VOLTAGES, |
| .min_uV = DA914X_MIN_MV * 1000, |
| .uV_step = DA914X_STEP_MV * 1000, |
| .linear_min_sel = DA914X_MIN_SEL, |
| .vsel_reg = DA9121_REG_BUCK_BUCK1_5, |
| .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, |
| .enable_reg = DA9121_REG_BUCK_BUCK1_0, |
| .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, |
| }; |
| |
| static const struct regulator_desc da9142_reg = { |
| .id = DA9121_IDX_BUCK1, |
| .name = "DA9142 BUCK1", |
| .of_match = "buck1", |
| .of_parse_cb = da9121_of_parse_cb, |
| .owner = THIS_MODULE, |
| .regulators_node = of_match_ptr("regulators"), |
| .of_map_mode = da9121_map_mode, |
| .ops = &da9121_buck_ops, |
| .type = REGULATOR_VOLTAGE, |
| .n_voltages = DA914X_N_VOLTAGES, |
| .min_uV = DA914X_MIN_MV * 1000, |
| .uV_step = DA914X_STEP_MV * 1000, |
| .linear_min_sel = DA914X_MIN_SEL, |
| .enable_reg = DA9121_REG_BUCK_BUCK1_0, |
| .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN, |
| .vsel_reg = DA9121_REG_BUCK_BUCK1_5, |
| .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT, |
| }; |
| |
| |
| static const struct regulator_desc *local_da9121_regulators[][DA9121_IDX_MAX] = { |
| [DA9121_TYPE_DA9121_DA9130] = { &da9121_reg, NULL }, |
| [DA9121_TYPE_DA9220_DA9132] = { &da9220_reg[0], &da9220_reg[1] }, |
| [DA9121_TYPE_DA9122_DA9131] = { &da9122_reg[0], &da9122_reg[1] }, |
| [DA9121_TYPE_DA9217] = { &da9217_reg, NULL }, |
| [DA9121_TYPE_DA9141] = { &da9141_reg, NULL }, |
| [DA9121_TYPE_DA9142] = { &da9142_reg, NULL }, |
| }; |
| |
| static void da9121_status_poll_on(struct work_struct *work) |
| { |
| struct da9121 *chip = container_of(work, struct da9121, work.work); |
| int status[3] = {0}; |
| int clear[3] = {0}; |
| unsigned long delay; |
| int i; |
| int ret; |
| |
| ret = regmap_bulk_read(chip->regmap, DA9121_REG_SYS_STATUS_0, status, 2); |
| if (ret < 0) { |
| dev_err(chip->dev, |
| "Failed to read STATUS registers: %d\n", ret); |
| goto error; |
| } |
| |
| /* Possible events are tested to be within range for the variant, potentially |
| * masked by the IRQ handler (not just warned about), as having been masked, |
| * and the respective state cleared - then flagged to unmask for next IRQ. |
| */ |
| for (i = 0; i < ARRAY_SIZE(status_event_handling); i++) { |
| const struct status_event_data *item = &status_event_handling[i]; |
| int reg_idx = item->reg_index; |
| bool relevant = (item->buck_id <= variant_parameters[chip->variant_id].num_bucks); |
| bool supported = (item->warn == NULL); |
| bool persisting = (chip->persistent[reg_idx] & item->event_bit); |
| bool now_cleared = !(status[reg_idx] & item->status_bit); |
| |
| if (relevant && supported && persisting && now_cleared) { |
| clear[reg_idx] |= item->mask_bit; |
| chip->persistent[reg_idx] &= ~item->event_bit; |
| } |
| } |
| |
| for (i = 0; i < 2; i++) { |
| if (clear[i]) { |
| unsigned int reg = DA9121_REG_SYS_MASK_0 + i; |
| unsigned int mbit = clear[i]; |
| |
| ret = regmap_update_bits(chip->regmap, reg, mbit, 0); |
| if (ret < 0) { |
| dev_err(chip->dev, |
| "Failed to unmask 0x%02x %d\n", |
| reg, ret); |
| goto error; |
| } |
| } |
| } |
| |
| if (chip->persistent[0] | chip->persistent[1]) { |
| delay = msecs_to_jiffies(chip->passive_delay); |
| queue_delayed_work(system_freezable_wq, &chip->work, delay); |
| } |
| |
| error: |
| return; |
| } |
| |
| static irqreturn_t da9121_irq_handler(int irq, void *data) |
| { |
| struct da9121 *chip = data; |
| struct regulator_dev *rdev; |
| int event[3] = {0}; |
| int handled[3] = {0}; |
| int mask[3] = {0}; |
| int ret = IRQ_NONE; |
| int i; |
| int err; |
| |
| err = regmap_bulk_read(chip->regmap, DA9121_REG_SYS_EVENT_0, event, 3); |
| if (err < 0) { |
| dev_err(chip->dev, "Failed to read EVENT registers %d\n", err); |
| ret = IRQ_NONE; |
| goto error; |
| } |
| |
| err = regmap_bulk_read(chip->regmap, DA9121_REG_SYS_MASK_0, mask, 3); |
| if (err < 0) { |
| dev_err(chip->dev, |
| "Failed to read MASK registers: %d\n", ret); |
| ret = IRQ_NONE; |
| goto error; |
| } |
| |
| rdev = chip->rdev[DA9121_IDX_BUCK1]; |
| |
| /* Possible events are tested to be within range for the variant, currently |
| * enabled, and having triggered this IRQ. The event may then be notified, |
| * or a warning given for unexpected events - those from device POR, and |
| * currently unsupported GPIO configurations. |
| */ |
| for (i = 0; i < ARRAY_SIZE(status_event_handling); i++) { |
| const struct status_event_data *item = &status_event_handling[i]; |
| int reg_idx = item->reg_index; |
| bool relevant = (item->buck_id <= variant_parameters[chip->variant_id].num_bucks); |
| bool enabled = !(mask[reg_idx] & item->mask_bit); |
| bool active = (event[reg_idx] & item->event_bit); |
| bool notify = (item->warn == NULL); |
| |
| if (relevant && enabled && active) { |
| if (notify) { |
| chip->persistent[reg_idx] |= item->event_bit; |
| regulator_notifier_call_chain(rdev, item->notification, NULL); |
| } else { |
| dev_warn(chip->dev, item->warn); |
| handled[reg_idx] |= item->event_bit; |
| ret = IRQ_HANDLED; |
| } |
| } |
| } |
| |
| for (i = 0; i < 3; i++) { |
| if (event[i] != handled[i]) { |
| dev_warn(chip->dev, |
| "Unhandled event(s) in bank%d 0x%02x\n", i, |
| event[i] ^ handled[i]); |
| } |
| } |
| |
| /* Mask the interrupts for persistent events OV, OC, UV, WARN, CRIT */ |
| for (i = 0; i < 2; i++) { |
| if (handled[i]) { |
| unsigned int reg = DA9121_REG_SYS_MASK_0 + i; |
| unsigned int mbit = handled[i]; |
| |
| err = regmap_update_bits(chip->regmap, reg, mbit, mbit); |
| if (err < 0) { |
| dev_err(chip->dev, |
| "Failed to mask 0x%02x interrupt %d\n", |
| reg, err); |
| ret = IRQ_NONE; |
| goto error; |
| } |
| } |
| } |
| |
| /* clear the events */ |
| if (handled[0] | handled[1] | handled[2]) { |
| err = regmap_bulk_write(chip->regmap, DA9121_REG_SYS_EVENT_0, handled, 3); |
| if (err < 0) { |
| dev_err(chip->dev, "Fail to write EVENTs %d\n", err); |
| ret = IRQ_NONE; |
| goto error; |
| } |
| } |
| |
| queue_delayed_work(system_freezable_wq, &chip->work, 0); |
| error: |
| return ret; |
| } |
| |
| static int da9121_set_regulator_config(struct da9121 *chip) |
| { |
| struct regulator_config config = { }; |
| unsigned int max_matches = variant_parameters[chip->variant_id].num_bucks; |
| int ret = 0; |
| int i; |
| |
| for (i = 0; i < max_matches; i++) { |
| const struct regulator_desc *regl_desc = |
| local_da9121_regulators[chip->variant_id][i]; |
| |
| config.dev = chip->dev; |
| config.driver_data = chip; |
| config.regmap = chip->regmap; |
| |
| chip->rdev[i] = devm_regulator_register(chip->dev, |
| regl_desc, &config); |
| if (IS_ERR(chip->rdev[i])) { |
| dev_err(chip->dev, "Failed to register regulator %s, %d/%d\n", |
| regl_desc->name, (i+1), max_matches); |
| ret = PTR_ERR(chip->rdev[i]); |
| goto error; |
| } |
| } |
| |
| error: |
| return ret; |
| } |
| |
| /* DA9121 chip register model */ |
| static const struct regmap_range da9121_1ch_readable_ranges[] = { |
| regmap_reg_range(DA9121_REG_SYS_STATUS_0, DA9121_REG_SYS_MASK_3), |
| regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3), |
| regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1), |
| regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_6), |
| regmap_reg_range(DA9121_REG_OTP_DEVICE_ID, DA9121_REG_OTP_CONFIG_ID), |
| }; |
| |
| static const struct regmap_access_table da9121_1ch_readable_table = { |
| .yes_ranges = da9121_1ch_readable_ranges, |
| .n_yes_ranges = ARRAY_SIZE(da9121_1ch_readable_ranges), |
| }; |
| |
| static const struct regmap_range da9121_2ch_readable_ranges[] = { |
| regmap_reg_range(DA9121_REG_SYS_STATUS_0, DA9121_REG_SYS_MASK_3), |
| regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3), |
| regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1), |
| regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_7), |
| regmap_reg_range(DA9xxx_REG_BUCK_BUCK2_0, DA9xxx_REG_BUCK_BUCK2_7), |
| regmap_reg_range(DA9121_REG_OTP_DEVICE_ID, DA9121_REG_OTP_CONFIG_ID), |
| }; |
| |
| static const struct regmap_access_table da9121_2ch_readable_table = { |
| .yes_ranges = da9121_2ch_readable_ranges, |
| .n_yes_ranges = ARRAY_SIZE(da9121_2ch_readable_ranges), |
| }; |
| |
| static const struct regmap_range da9121_1ch_writeable_ranges[] = { |
| regmap_reg_range(DA9121_REG_SYS_EVENT_0, DA9121_REG_SYS_MASK_3), |
| regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3), |
| regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1), |
| regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_2), |
| regmap_reg_range(DA9121_REG_BUCK_BUCK1_4, DA9121_REG_BUCK_BUCK1_6), |
| }; |
| |
| static const struct regmap_access_table da9121_1ch_writeable_table = { |
| .yes_ranges = da9121_1ch_writeable_ranges, |
| .n_yes_ranges = ARRAY_SIZE(da9121_1ch_writeable_ranges), |
| }; |
| |
| static const struct regmap_range da9121_2ch_writeable_ranges[] = { |
| regmap_reg_range(DA9121_REG_SYS_EVENT_0, DA9121_REG_SYS_MASK_3), |
| regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3), |
| regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1), |
| regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_2), |
| regmap_reg_range(DA9121_REG_BUCK_BUCK1_4, DA9121_REG_BUCK_BUCK1_7), |
| regmap_reg_range(DA9xxx_REG_BUCK_BUCK2_0, DA9xxx_REG_BUCK_BUCK2_2), |
| regmap_reg_range(DA9xxx_REG_BUCK_BUCK2_4, DA9xxx_REG_BUCK_BUCK2_7), |
| }; |
| |
| static const struct regmap_access_table da9121_2ch_writeable_table = { |
| .yes_ranges = da9121_2ch_writeable_ranges, |
| .n_yes_ranges = ARRAY_SIZE(da9121_2ch_writeable_ranges), |
| }; |
| |
| |
| static const struct regmap_range da9121_volatile_ranges[] = { |
| regmap_reg_range(DA9121_REG_SYS_STATUS_0, DA9121_REG_SYS_EVENT_2), |
| regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1), |
| regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_6), |
| }; |
| |
| static const struct regmap_access_table da9121_volatile_table = { |
| .yes_ranges = da9121_volatile_ranges, |
| .n_yes_ranges = ARRAY_SIZE(da9121_volatile_ranges), |
| }; |
| |
| /* DA9121 regmap config for 1 channel variants */ |
| static struct regmap_config da9121_1ch_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = DA9121_REG_OTP_CONFIG_ID, |
| .rd_table = &da9121_1ch_readable_table, |
| .wr_table = &da9121_1ch_writeable_table, |
| .volatile_table = &da9121_volatile_table, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| /* DA9121 regmap config for 2 channel variants */ |
| static struct regmap_config da9121_2ch_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = DA9121_REG_OTP_CONFIG_ID, |
| .rd_table = &da9121_2ch_readable_table, |
| .wr_table = &da9121_2ch_writeable_table, |
| .volatile_table = &da9121_volatile_table, |
| .cache_type = REGCACHE_RBTREE, |
| }; |
| |
| static int da9121_check_device_type(struct i2c_client *i2c, struct da9121 *chip) |
| { |
| u32 device_id; |
| u32 variant_id; |
| u8 variant_mrc, variant_vrc; |
| char *type; |
| bool config_match = false; |
| int ret = 0; |
| |
| ret = regmap_read(chip->regmap, DA9121_REG_OTP_DEVICE_ID, &device_id); |
| if (ret < 0) { |
| dev_err(chip->dev, "Cannot read device ID: %d\n", ret); |
| goto error; |
| } |
| |
| ret = regmap_read(chip->regmap, DA9121_REG_OTP_VARIANT_ID, &variant_id); |
| if (ret < 0) { |
| dev_err(chip->dev, "Cannot read variant ID: %d\n", ret); |
| goto error; |
| } |
| |
| if ((device_id != DA9121_DEVICE_ID) && (device_id != DA914x_DEVICE_ID)) { |
| dev_err(chip->dev, "Invalid device ID: 0x%02x\n", device_id); |
| ret = -ENODEV; |
| goto error; |
| } |
| |
| variant_vrc = variant_id & DA9121_MASK_OTP_VARIANT_ID_VRC; |
| |
| switch (chip->subvariant_id) { |
| case DA9121_SUBTYPE_DA9121: |
| type = "DA9121"; |
| config_match = (variant_vrc == DA9121_VARIANT_VRC); |
| break; |
| case DA9121_SUBTYPE_DA9130: |
| type = "DA9130"; |
| config_match = (variant_vrc == DA9130_VARIANT_VRC); |
| break; |
| case DA9121_SUBTYPE_DA9220: |
| type = "DA9220"; |
| config_match = (variant_vrc == DA9220_VARIANT_VRC); |
| break; |
| case DA9121_SUBTYPE_DA9132: |
| type = "DA9132"; |
| config_match = (variant_vrc == DA9132_VARIANT_VRC); |
| break; |
| case DA9121_SUBTYPE_DA9122: |
| type = "DA9122"; |
| config_match = (variant_vrc == DA9122_VARIANT_VRC); |
| break; |
| case DA9121_SUBTYPE_DA9131: |
| type = "DA9131"; |
| config_match = (variant_vrc == DA9131_VARIANT_VRC); |
| break; |
| case DA9121_SUBTYPE_DA9217: |
| type = "DA9217"; |
| config_match = (variant_vrc == DA9217_VARIANT_VRC); |
| break; |
| default: |
| type = "Unknown"; |
| break; |
| } |
| |
| if (device_id == DA914x_DEVICE_ID) { |
| switch (chip->subvariant_id) { |
| case DA9121_SUBTYPE_DA9141: |
| type = "DA9141"; |
| config_match = (variant_vrc == DA9141_VARIANT_VRC); |
| break; |
| case DA9121_SUBTYPE_DA9142: |
| type = "DA9142"; |
| config_match = (variant_vrc == DA9142_VARIANT_VRC); |
| break; |
| default: |
| type = "Unknown"; |
| break; |
| } |
| } |
| |
| dev_info(chip->dev, |
| "Device detected (device-ID: 0x%02X, var-ID: 0x%02X, %s)\n", |
| device_id, variant_id, type); |
| |
| if (!config_match) { |
| dev_err(chip->dev, "Device tree configuration does not match detected device.\n"); |
| ret = -EINVAL; |
| goto error; |
| } |
| |
| variant_mrc = (variant_id & DA9121_MASK_OTP_VARIANT_ID_MRC) |
| >> DA9121_SHIFT_OTP_VARIANT_ID_MRC; |
| |
| if (((device_id == DA9121_DEVICE_ID) && |
| (variant_mrc < DA9121_VARIANT_MRC_BASE)) || |
| ((device_id == DA914x_DEVICE_ID) && |
| (variant_mrc != DA914x_VARIANT_MRC_BASE))) { |
| dev_err(chip->dev, |
| "Cannot support variant MRC: 0x%02X\n", variant_mrc); |
| ret = -EINVAL; |
| } |
| error: |
| return ret; |
| } |
| |
| static int da9121_assign_chip_model(struct i2c_client *i2c, |
| struct da9121 *chip) |
| { |
| struct regmap_config *regmap; |
| int ret = 0; |
| |
| chip->dev = &i2c->dev; |
| |
| /* Use configured subtype to select the regulator descriptor index and |
| * register map, common to both consumer and automotive grade variants |
| */ |
| switch (chip->subvariant_id) { |
| case DA9121_SUBTYPE_DA9121: |
| case DA9121_SUBTYPE_DA9130: |
| chip->variant_id = DA9121_TYPE_DA9121_DA9130; |
| regmap = &da9121_1ch_regmap_config; |
| break; |
| case DA9121_SUBTYPE_DA9217: |
| chip->variant_id = DA9121_TYPE_DA9217; |
| regmap = &da9121_1ch_regmap_config; |
| break; |
| case DA9121_SUBTYPE_DA9122: |
| case DA9121_SUBTYPE_DA9131: |
| chip->variant_id = DA9121_TYPE_DA9122_DA9131; |
| regmap = &da9121_2ch_regmap_config; |
| break; |
| case DA9121_SUBTYPE_DA9220: |
| case DA9121_SUBTYPE_DA9132: |
| chip->variant_id = DA9121_TYPE_DA9220_DA9132; |
| regmap = &da9121_2ch_regmap_config; |
| break; |
| case DA9121_SUBTYPE_DA9141: |
| chip->variant_id = DA9121_TYPE_DA9141; |
| regmap = &da9121_1ch_regmap_config; |
| break; |
| case DA9121_SUBTYPE_DA9142: |
| chip->variant_id = DA9121_TYPE_DA9142; |
| regmap = &da9121_2ch_regmap_config; |
| break; |
| } |
| |
| /* Set these up for of_regulator_match call which may want .of_map_modes */ |
| da9121_matches[0].desc = local_da9121_regulators[chip->variant_id][0]; |
| da9121_matches[1].desc = local_da9121_regulators[chip->variant_id][1]; |
| |
| chip->regmap = devm_regmap_init_i2c(i2c, regmap); |
| if (IS_ERR(chip->regmap)) { |
| ret = PTR_ERR(chip->regmap); |
| dev_err(chip->dev, "Failed to configure a register map: %d\n", |
| ret); |
| return ret; |
| } |
| |
| ret = da9121_check_device_type(i2c, chip); |
| |
| return ret; |
| } |
| |
| static int da9121_config_irq(struct i2c_client *i2c, |
| struct da9121 *chip) |
| { |
| unsigned int p_delay = DA9121_DEFAULT_POLLING_PERIOD_MS; |
| const int mask_all[4] = { 0, 0, 0xFF, 0xFF }; |
| int ret = 0; |
| |
| chip->chip_irq = i2c->irq; |
| |
| if (chip->chip_irq != 0) { |
| if (!of_property_read_u32(chip->dev->of_node, |
| "dlg,irq-polling-delay-passive-ms", |
| &p_delay)) { |
| if (p_delay < DA9121_MIN_POLLING_PERIOD_MS || |
| p_delay > DA9121_MAX_POLLING_PERIOD_MS) { |
| dev_warn(chip->dev, |
| "Out-of-range polling period %d ms\n", |
| p_delay); |
| p_delay = DA9121_DEFAULT_POLLING_PERIOD_MS; |
| } |
| } |
| |
| chip->passive_delay = p_delay; |
| |
| ret = request_threaded_irq(chip->chip_irq, NULL, |
| da9121_irq_handler, |
| IRQF_TRIGGER_LOW|IRQF_ONESHOT, |
| "da9121", chip); |
| if (ret != 0) { |
| dev_err(chip->dev, "Failed IRQ request: %d\n", |
| chip->chip_irq); |
| goto error; |
| } |
| |
| ret = regmap_bulk_write(chip->regmap, DA9121_REG_SYS_MASK_0, mask_all, 4); |
| if (ret != 0) { |
| dev_err(chip->dev, "Failed to set IRQ masks: %d\n", |
| ret); |
| goto regmap_error; |
| } |
| |
| INIT_DELAYED_WORK(&chip->work, da9121_status_poll_on); |
| dev_info(chip->dev, "Interrupt polling period set at %d ms\n", |
| chip->passive_delay); |
| } |
| error: |
| return ret; |
| regmap_error: |
| free_irq(chip->chip_irq, chip); |
| return ret; |
| } |
| |
| static const struct of_device_id da9121_dt_ids[] = { |
| { .compatible = "dlg,da9121", .data = (void *) DA9121_SUBTYPE_DA9121 }, |
| { .compatible = "dlg,da9130", .data = (void *) DA9121_SUBTYPE_DA9130 }, |
| { .compatible = "dlg,da9217", .data = (void *) DA9121_SUBTYPE_DA9217 }, |
| { .compatible = "dlg,da9122", .data = (void *) DA9121_SUBTYPE_DA9122 }, |
| { .compatible = "dlg,da9131", .data = (void *) DA9121_SUBTYPE_DA9131 }, |
| { .compatible = "dlg,da9220", .data = (void *) DA9121_SUBTYPE_DA9220 }, |
| { .compatible = "dlg,da9132", .data = (void *) DA9121_SUBTYPE_DA9132 }, |
| { .compatible = "dlg,da9141", .data = (void *) DA9121_SUBTYPE_DA9141 }, |
| { .compatible = "dlg,da9142", .data = (void *) DA9121_SUBTYPE_DA9142 }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, da9121_dt_ids); |
| |
| static inline int da9121_of_get_id(struct device *dev) |
| { |
| const struct of_device_id *id = of_match_device(da9121_dt_ids, dev); |
| |
| if (!id) { |
| dev_err(dev, "%s: Failed\n", __func__); |
| return -EINVAL; |
| } |
| return (uintptr_t)id->data; |
| } |
| |
| static int da9121_i2c_probe(struct i2c_client *i2c, |
| const struct i2c_device_id *id) |
| { |
| struct da9121 *chip; |
| const int mask_all[4] = { 0xFF, 0xFF, 0xFF, 0xFF }; |
| int ret = 0; |
| |
| chip = devm_kzalloc(&i2c->dev, sizeof(struct da9121), GFP_KERNEL); |
| if (!chip) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| chip->pdata = i2c->dev.platform_data; |
| chip->subvariant_id = da9121_of_get_id(&i2c->dev); |
| |
| ret = da9121_assign_chip_model(i2c, chip); |
| if (ret < 0) |
| goto error; |
| |
| ret = regmap_bulk_write(chip->regmap, DA9121_REG_SYS_MASK_0, mask_all, 4); |
| if (ret != 0) { |
| dev_err(chip->dev, "Failed to set IRQ masks: %d\n", ret); |
| goto error; |
| } |
| |
| ret = da9121_set_regulator_config(chip); |
| if (ret < 0) |
| goto error; |
| |
| ret = da9121_config_irq(i2c, chip); |
| |
| error: |
| return ret; |
| } |
| |
| static int da9121_i2c_remove(struct i2c_client *i2c) |
| { |
| struct da9121 *chip = i2c_get_clientdata(i2c); |
| const int mask_all[4] = { 0xFF, 0xFF, 0xFF, 0xFF }; |
| int ret; |
| |
| free_irq(chip->chip_irq, chip); |
| cancel_delayed_work_sync(&chip->work); |
| |
| ret = regmap_bulk_write(chip->regmap, DA9121_REG_SYS_MASK_0, mask_all, 4); |
| if (ret != 0) |
| dev_err(chip->dev, "Failed to set IRQ masks: %d\n", ret); |
| return 0; |
| } |
| |
| static const struct i2c_device_id da9121_i2c_id[] = { |
| {"da9121", DA9121_TYPE_DA9121_DA9130}, |
| {"da9130", DA9121_TYPE_DA9121_DA9130}, |
| {"da9217", DA9121_TYPE_DA9217}, |
| {"da9122", DA9121_TYPE_DA9122_DA9131}, |
| {"da9131", DA9121_TYPE_DA9122_DA9131}, |
| {"da9220", DA9121_TYPE_DA9220_DA9132}, |
| {"da9132", DA9121_TYPE_DA9220_DA9132}, |
| {"da9141", DA9121_TYPE_DA9141}, |
| {"da9142", DA9121_TYPE_DA9142}, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(i2c, da9121_i2c_id); |
| |
| static struct i2c_driver da9121_regulator_driver = { |
| .driver = { |
| .name = "da9121", |
| .of_match_table = of_match_ptr(da9121_dt_ids), |
| }, |
| .probe = da9121_i2c_probe, |
| .remove = da9121_i2c_remove, |
| .id_table = da9121_i2c_id, |
| }; |
| |
| module_i2c_driver(da9121_regulator_driver); |
| |
| MODULE_LICENSE("GPL v2"); |