drivers/thermal/ti-soc-thermal/ti-thermal-common.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * OMAP thermal driver interface
 *
 * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
 * Contact:
 *   Eduardo Valentin <eduardo.valentin@ti.com>
 */

#include <linux/device.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/gfp.h>
#include <linux/kernel.h>
#include <linux/workqueue.h>
#include <linux/thermal.h>
#include <linux/cpufreq.h>
#include <linux/cpumask.h>
#include <linux/cpu_cooling.h>
#include <linux/of.h>

#include "ti-thermal.h"
#include "ti-bandgap.h"
#include "../thermal_hwmon.h"

/* common data structures */
struct ti_thermal_data {
	struct cpufreq_policy *policy;
	struct thermal_zone_device *ti_thermal;
	struct thermal_zone_device *pcb_tz;
	struct thermal_cooling_device *cool_dev;
	struct ti_bandgap *bgp;
	enum thermal_device_mode mode;
	struct work_struct thermal_wq;
	int sensor_id;
	bool our_zone;
};

static void ti_thermal_work(struct work_struct *work)
{
	struct ti_thermal_data *data = container_of(work,
					struct ti_thermal_data, thermal_wq);

	thermal_zone_device_update(data->ti_thermal, THERMAL_EVENT_UNSPECIFIED);

	dev_dbg(&data->ti_thermal->device, "updated thermal zone %s\n",
		data->ti_thermal->type);
}

/**
 * ti_thermal_hotspot_temperature - returns sensor extrapolated temperature
 * @t:	omap sensor temperature
 * @s:	omap sensor slope value
 * @c:	omap sensor const value
 */
static inline int ti_thermal_hotspot_temperature(int t, int s, int c)
{
	int delta = t * s / 1000 + c;

	if (delta < 0)
		delta = 0;

	return t + delta;
}

/* thermal zone ops */
/* Get temperature callback function for thermal zone */
static inline int __ti_thermal_get_temp(void *devdata, int *temp)
{
	struct thermal_zone_device *pcb_tz = NULL;
	struct ti_thermal_data *data = devdata;
	struct ti_bandgap *bgp;
	const struct ti_temp_sensor *s;
	int ret, tmp, slope, constant;
	int pcb_temp;

	if (!data)
		return 0;

	bgp = data->bgp;
	s = &bgp->conf->sensors[data->sensor_id];

	ret = ti_bandgap_read_temperature(bgp, data->sensor_id, &tmp);
	if (ret)
		return ret;

	/* Default constants */
	slope = thermal_zone_get_slope(data->ti_thermal);
	constant = thermal_zone_get_offset(data->ti_thermal);

	pcb_tz = data->pcb_tz;
	/* In case pcb zone is available, use the extrapolation rule with it */
	if (!IS_ERR(pcb_tz)) {
		ret = thermal_zone_get_temp(pcb_tz, &pcb_temp);
		if (!ret) {
			tmp -= pcb_temp; /* got a valid PCB temp */
			slope = s->slope_pcb;
			constant = s->constant_pcb;
		} else {
			dev_err(bgp->dev,
				"Failed to read PCB state. Using defaults\n");
			ret = 0;
		}
	}
	*temp = ti_thermal_hotspot_temperature(tmp, slope, constant);

	return ret;
}

static int __ti_thermal_get_trend(void *p, int trip, enum thermal_trend *trend)
{
	struct ti_thermal_data *data = p;
	struct ti_bandgap *bgp;
	int id, tr, ret = 0;

	bgp = data->bgp;
	id = data->sensor_id;

	ret = ti_bandgap_get_trend(bgp, id, &tr);
	if (ret)
		return ret;

	if (tr > 0)
		*trend = THERMAL_TREND_RAISING;
	else if (tr < 0)
		*trend = THERMAL_TREND_DROPPING;
	else
		*trend = THERMAL_TREND_STABLE;

	return 0;
}

static const struct thermal_zone_of_device_ops ti_of_thermal_ops = {
	.get_temp = __ti_thermal_get_temp,
	.get_trend = __ti_thermal_get_trend,
};

static struct ti_thermal_data
*ti_thermal_build_data(struct ti_bandgap *bgp, int id)
{
	struct ti_thermal_data *data;

	data = devm_kzalloc(bgp->dev, sizeof(*data), GFP_KERNEL);
	if (!data) {
		dev_err(bgp->dev, "kzalloc fail\n");
		return NULL;
	}
	data->sensor_id = id;
	data->bgp = bgp;
	data->mode = THERMAL_DEVICE_ENABLED;
	/* pcb_tz will be either valid or PTR_ERR() */
	data->pcb_tz = thermal_zone_get_zone_by_name("pcb");
	INIT_WORK(&data->thermal_wq, ti_thermal_work);

	return data;
}

int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
			     char *domain)
{
	struct ti_thermal_data *data;
	int interval;

	data = ti_bandgap_get_sensor_data(bgp, id);

	if (IS_ERR_OR_NULL(data))
		data = ti_thermal_build_data(bgp, id);

	if (!data)
		return -EINVAL;

	/* in case this is specified by DT */
	data->ti_thermal = devm_thermal_zone_of_sensor_register(bgp->dev, id,
					data, &ti_of_thermal_ops);
	if (IS_ERR(data->ti_thermal)) {
		dev_err(bgp->dev, "thermal zone device is NULL\n");
		return PTR_ERR(data->ti_thermal);
	}

	interval = jiffies_to_msecs(data->ti_thermal->polling_delay_jiffies);

	ti_bandgap_set_sensor_data(bgp, id, data);
	ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);

	if (devm_thermal_add_hwmon_sysfs(data->ti_thermal))
		dev_warn(bgp->dev, "failed to add hwmon sysfs attributes\n");

	return 0;
}

int ti_thermal_remove_sensor(struct ti_bandgap *bgp, int id)
{
	struct ti_thermal_data *data;

	data = ti_bandgap_get_sensor_data(bgp, id);

	if (!IS_ERR_OR_NULL(data) && data->ti_thermal) {
		if (data->our_zone)
			thermal_zone_device_unregister(data->ti_thermal);
	}

	return 0;
}

int ti_thermal_report_sensor_temperature(struct ti_bandgap *bgp, int id)
{
	struct ti_thermal_data *data;

	data = ti_bandgap_get_sensor_data(bgp, id);

	schedule_work(&data->thermal_wq);

	return 0;
}

int ti_thermal_register_cpu_cooling(struct ti_bandgap *bgp, int id)
{
	struct ti_thermal_data *data;
	struct device_node *np = bgp->dev->of_node;

	/*
	 * We are assuming here that if one deploys the zone
	 * using DT, then it must be aware that the cooling device
	 * loading has to happen via cpufreq driver.
	 */
	if (of_find_property(np, "#thermal-sensor-cells", NULL))
		return 0;

	data = ti_bandgap_get_sensor_data(bgp, id);
	if (!data || IS_ERR(data))
		data = ti_thermal_build_data(bgp, id);

	if (!data)
		return -EINVAL;

	data->policy = cpufreq_cpu_get(0);
	if (!data->policy) {
		pr_debug("%s: CPUFreq policy not found\n", __func__);
		return -EPROBE_DEFER;
	}

	/* Register cooling device */
	data->cool_dev = cpufreq_cooling_register(data->policy);
	if (IS_ERR(data->cool_dev)) {
		int ret = PTR_ERR(data->cool_dev);
		dev_err(bgp->dev, "Failed to register cpu cooling device %d\n",
			ret);
		cpufreq_cpu_put(data->policy);

		return ret;
	}
	ti_bandgap_set_sensor_data(bgp, id, data);

	return 0;
}

int ti_thermal_unregister_cpu_cooling(struct ti_bandgap *bgp, int id)
{
	struct ti_thermal_data *data;

	data = ti_bandgap_get_sensor_data(bgp, id);

	if (!IS_ERR_OR_NULL(data)) {
		cpufreq_cooling_unregister(data->cool_dev);
		if (data->policy)
			cpufreq_cpu_put(data->policy);
	}

	return 0;
}