| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o. |
| * |
| * Copyright (C) 2004 Infineon IFAP DC COM CPE |
| * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> |
| * Copyright (C) 2007 John Crispin <john@phrozen.org> |
| * Copyright (C) 2010 Thomas Langer, <thomas.langer@lantiq.com> |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/console.h> |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/ioport.h> |
| #include <linux/lantiq.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/serial.h> |
| #include <linux/serial_core.h> |
| #include <linux/slab.h> |
| #include <linux/sysrq.h> |
| #include <linux/tty.h> |
| #include <linux/tty_flip.h> |
| |
| #define PORT_LTQ_ASC 111 |
| #define MAXPORTS 2 |
| #define UART_DUMMY_UER_RX 1 |
| #define DRVNAME "lantiq,asc" |
| #ifdef __BIG_ENDIAN |
| #define LTQ_ASC_TBUF (0x0020 + 3) |
| #define LTQ_ASC_RBUF (0x0024 + 3) |
| #else |
| #define LTQ_ASC_TBUF 0x0020 |
| #define LTQ_ASC_RBUF 0x0024 |
| #endif |
| #define LTQ_ASC_FSTAT 0x0048 |
| #define LTQ_ASC_WHBSTATE 0x0018 |
| #define LTQ_ASC_STATE 0x0014 |
| #define LTQ_ASC_IRNCR 0x00F8 |
| #define LTQ_ASC_CLC 0x0000 |
| #define LTQ_ASC_ID 0x0008 |
| #define LTQ_ASC_PISEL 0x0004 |
| #define LTQ_ASC_TXFCON 0x0044 |
| #define LTQ_ASC_RXFCON 0x0040 |
| #define LTQ_ASC_CON 0x0010 |
| #define LTQ_ASC_BG 0x0050 |
| #define LTQ_ASC_IRNREN 0x00F4 |
| |
| #define ASC_IRNREN_TX 0x1 |
| #define ASC_IRNREN_RX 0x2 |
| #define ASC_IRNREN_ERR 0x4 |
| #define ASC_IRNREN_TX_BUF 0x8 |
| #define ASC_IRNCR_TIR 0x1 |
| #define ASC_IRNCR_RIR 0x2 |
| #define ASC_IRNCR_EIR 0x4 |
| #define ASC_IRNCR_MASK GENMASK(2, 0) |
| |
| #define ASCOPT_CSIZE 0x3 |
| #define TXFIFO_FL 1 |
| #define RXFIFO_FL 1 |
| #define ASCCLC_DISS 0x2 |
| #define ASCCLC_RMCMASK 0x0000FF00 |
| #define ASCCLC_RMCOFFSET 8 |
| #define ASCCON_M_8ASYNC 0x0 |
| #define ASCCON_M_7ASYNC 0x2 |
| #define ASCCON_ODD 0x00000020 |
| #define ASCCON_STP 0x00000080 |
| #define ASCCON_BRS 0x00000100 |
| #define ASCCON_FDE 0x00000200 |
| #define ASCCON_R 0x00008000 |
| #define ASCCON_FEN 0x00020000 |
| #define ASCCON_ROEN 0x00080000 |
| #define ASCCON_TOEN 0x00100000 |
| #define ASCSTATE_PE 0x00010000 |
| #define ASCSTATE_FE 0x00020000 |
| #define ASCSTATE_ROE 0x00080000 |
| #define ASCSTATE_ANY (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE) |
| #define ASCWHBSTATE_CLRREN 0x00000001 |
| #define ASCWHBSTATE_SETREN 0x00000002 |
| #define ASCWHBSTATE_CLRPE 0x00000004 |
| #define ASCWHBSTATE_CLRFE 0x00000008 |
| #define ASCWHBSTATE_CLRROE 0x00000020 |
| #define ASCTXFCON_TXFEN 0x0001 |
| #define ASCTXFCON_TXFFLU 0x0002 |
| #define ASCTXFCON_TXFITLMASK 0x3F00 |
| #define ASCTXFCON_TXFITLOFF 8 |
| #define ASCRXFCON_RXFEN 0x0001 |
| #define ASCRXFCON_RXFFLU 0x0002 |
| #define ASCRXFCON_RXFITLMASK 0x3F00 |
| #define ASCRXFCON_RXFITLOFF 8 |
| #define ASCFSTAT_RXFFLMASK 0x003F |
| #define ASCFSTAT_TXFFLMASK 0x3F00 |
| #define ASCFSTAT_TXFREEMASK 0x3F000000 |
| #define ASCFSTAT_TXFREEOFF 24 |
| |
| static void lqasc_tx_chars(struct uart_port *port); |
| static struct ltq_uart_port *lqasc_port[MAXPORTS]; |
| static struct uart_driver lqasc_reg; |
| |
| struct ltq_soc_data { |
| int (*fetch_irq)(struct device *dev, struct ltq_uart_port *ltq_port); |
| int (*request_irq)(struct uart_port *port); |
| void (*free_irq)(struct uart_port *port); |
| }; |
| |
| struct ltq_uart_port { |
| struct uart_port port; |
| /* clock used to derive divider */ |
| struct clk *freqclk; |
| /* clock gating of the ASC core */ |
| struct clk *clk; |
| unsigned int tx_irq; |
| unsigned int rx_irq; |
| unsigned int err_irq; |
| unsigned int common_irq; |
| spinlock_t lock; /* exclusive access for multi core */ |
| |
| const struct ltq_soc_data *soc; |
| }; |
| |
| static inline void asc_update_bits(u32 clear, u32 set, void __iomem *reg) |
| { |
| u32 tmp = __raw_readl(reg); |
| |
| __raw_writel((tmp & ~clear) | set, reg); |
| } |
| |
| static inline struct |
| ltq_uart_port *to_ltq_uart_port(struct uart_port *port) |
| { |
| return container_of(port, struct ltq_uart_port, port); |
| } |
| |
| static void |
| lqasc_stop_tx(struct uart_port *port) |
| { |
| return; |
| } |
| |
| static void |
| lqasc_start_tx(struct uart_port *port) |
| { |
| unsigned long flags; |
| struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); |
| |
| spin_lock_irqsave(<q_port->lock, flags); |
| lqasc_tx_chars(port); |
| spin_unlock_irqrestore(<q_port->lock, flags); |
| return; |
| } |
| |
| static void |
| lqasc_stop_rx(struct uart_port *port) |
| { |
| __raw_writel(ASCWHBSTATE_CLRREN, port->membase + LTQ_ASC_WHBSTATE); |
| } |
| |
| static int |
| lqasc_rx_chars(struct uart_port *port) |
| { |
| struct tty_port *tport = &port->state->port; |
| unsigned int ch = 0, rsr = 0, fifocnt; |
| |
| fifocnt = __raw_readl(port->membase + LTQ_ASC_FSTAT) & |
| ASCFSTAT_RXFFLMASK; |
| while (fifocnt--) { |
| u8 flag = TTY_NORMAL; |
| ch = readb(port->membase + LTQ_ASC_RBUF); |
| rsr = (__raw_readl(port->membase + LTQ_ASC_STATE) |
| & ASCSTATE_ANY) | UART_DUMMY_UER_RX; |
| tty_flip_buffer_push(tport); |
| port->icount.rx++; |
| |
| /* |
| * Note that the error handling code is |
| * out of the main execution path |
| */ |
| if (rsr & ASCSTATE_ANY) { |
| if (rsr & ASCSTATE_PE) { |
| port->icount.parity++; |
| asc_update_bits(0, ASCWHBSTATE_CLRPE, |
| port->membase + LTQ_ASC_WHBSTATE); |
| } else if (rsr & ASCSTATE_FE) { |
| port->icount.frame++; |
| asc_update_bits(0, ASCWHBSTATE_CLRFE, |
| port->membase + LTQ_ASC_WHBSTATE); |
| } |
| if (rsr & ASCSTATE_ROE) { |
| port->icount.overrun++; |
| asc_update_bits(0, ASCWHBSTATE_CLRROE, |
| port->membase + LTQ_ASC_WHBSTATE); |
| } |
| |
| rsr &= port->read_status_mask; |
| |
| if (rsr & ASCSTATE_PE) |
| flag = TTY_PARITY; |
| else if (rsr & ASCSTATE_FE) |
| flag = TTY_FRAME; |
| } |
| |
| if ((rsr & port->ignore_status_mask) == 0) |
| tty_insert_flip_char(tport, ch, flag); |
| |
| if (rsr & ASCSTATE_ROE) |
| /* |
| * Overrun is special, since it's reported |
| * immediately, and doesn't affect the current |
| * character |
| */ |
| tty_insert_flip_char(tport, 0, TTY_OVERRUN); |
| } |
| |
| if (ch != 0) |
| tty_flip_buffer_push(tport); |
| |
| return 0; |
| } |
| |
| static void |
| lqasc_tx_chars(struct uart_port *port) |
| { |
| struct circ_buf *xmit = &port->state->xmit; |
| if (uart_tx_stopped(port)) { |
| lqasc_stop_tx(port); |
| return; |
| } |
| |
| while (((__raw_readl(port->membase + LTQ_ASC_FSTAT) & |
| ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF) != 0) { |
| if (port->x_char) { |
| writeb(port->x_char, port->membase + LTQ_ASC_TBUF); |
| port->icount.tx++; |
| port->x_char = 0; |
| continue; |
| } |
| |
| if (uart_circ_empty(xmit)) |
| break; |
| |
| writeb(port->state->xmit.buf[port->state->xmit.tail], |
| port->membase + LTQ_ASC_TBUF); |
| xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); |
| port->icount.tx++; |
| } |
| |
| if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) |
| uart_write_wakeup(port); |
| } |
| |
| static irqreturn_t |
| lqasc_tx_int(int irq, void *_port) |
| { |
| unsigned long flags; |
| struct uart_port *port = (struct uart_port *)_port; |
| struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); |
| |
| spin_lock_irqsave(<q_port->lock, flags); |
| __raw_writel(ASC_IRNCR_TIR, port->membase + LTQ_ASC_IRNCR); |
| spin_unlock_irqrestore(<q_port->lock, flags); |
| lqasc_start_tx(port); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t |
| lqasc_err_int(int irq, void *_port) |
| { |
| unsigned long flags; |
| struct uart_port *port = (struct uart_port *)_port; |
| struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); |
| |
| spin_lock_irqsave(<q_port->lock, flags); |
| /* clear any pending interrupts */ |
| asc_update_bits(0, ASCWHBSTATE_CLRPE | ASCWHBSTATE_CLRFE | |
| ASCWHBSTATE_CLRROE, port->membase + LTQ_ASC_WHBSTATE); |
| spin_unlock_irqrestore(<q_port->lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t |
| lqasc_rx_int(int irq, void *_port) |
| { |
| unsigned long flags; |
| struct uart_port *port = (struct uart_port *)_port; |
| struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); |
| |
| spin_lock_irqsave(<q_port->lock, flags); |
| __raw_writel(ASC_IRNCR_RIR, port->membase + LTQ_ASC_IRNCR); |
| lqasc_rx_chars(port); |
| spin_unlock_irqrestore(<q_port->lock, flags); |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t lqasc_irq(int irq, void *p) |
| { |
| unsigned long flags; |
| u32 stat; |
| struct uart_port *port = p; |
| struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); |
| |
| spin_lock_irqsave(<q_port->lock, flags); |
| stat = readl(port->membase + LTQ_ASC_IRNCR); |
| spin_unlock_irqrestore(<q_port->lock, flags); |
| if (!(stat & ASC_IRNCR_MASK)) |
| return IRQ_NONE; |
| |
| if (stat & ASC_IRNCR_TIR) |
| lqasc_tx_int(irq, p); |
| |
| if (stat & ASC_IRNCR_RIR) |
| lqasc_rx_int(irq, p); |
| |
| if (stat & ASC_IRNCR_EIR) |
| lqasc_err_int(irq, p); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static unsigned int |
| lqasc_tx_empty(struct uart_port *port) |
| { |
| int status; |
| status = __raw_readl(port->membase + LTQ_ASC_FSTAT) & |
| ASCFSTAT_TXFFLMASK; |
| return status ? 0 : TIOCSER_TEMT; |
| } |
| |
| static unsigned int |
| lqasc_get_mctrl(struct uart_port *port) |
| { |
| return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR; |
| } |
| |
| static void |
| lqasc_set_mctrl(struct uart_port *port, u_int mctrl) |
| { |
| } |
| |
| static void |
| lqasc_break_ctl(struct uart_port *port, int break_state) |
| { |
| } |
| |
| static int |
| lqasc_startup(struct uart_port *port) |
| { |
| struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); |
| int retval; |
| unsigned long flags; |
| |
| if (!IS_ERR(ltq_port->clk)) |
| clk_prepare_enable(ltq_port->clk); |
| port->uartclk = clk_get_rate(ltq_port->freqclk); |
| |
| spin_lock_irqsave(<q_port->lock, flags); |
| asc_update_bits(ASCCLC_DISS | ASCCLC_RMCMASK, (1 << ASCCLC_RMCOFFSET), |
| port->membase + LTQ_ASC_CLC); |
| |
| __raw_writel(0, port->membase + LTQ_ASC_PISEL); |
| __raw_writel( |
| ((TXFIFO_FL << ASCTXFCON_TXFITLOFF) & ASCTXFCON_TXFITLMASK) | |
| ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, |
| port->membase + LTQ_ASC_TXFCON); |
| __raw_writel( |
| ((RXFIFO_FL << ASCRXFCON_RXFITLOFF) & ASCRXFCON_RXFITLMASK) |
| | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, |
| port->membase + LTQ_ASC_RXFCON); |
| /* make sure other settings are written to hardware before |
| * setting enable bits |
| */ |
| wmb(); |
| asc_update_bits(0, ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN | |
| ASCCON_ROEN, port->membase + LTQ_ASC_CON); |
| |
| spin_unlock_irqrestore(<q_port->lock, flags); |
| |
| retval = ltq_port->soc->request_irq(port); |
| if (retval) |
| return retval; |
| |
| __raw_writel(ASC_IRNREN_RX | ASC_IRNREN_ERR | ASC_IRNREN_TX, |
| port->membase + LTQ_ASC_IRNREN); |
| return retval; |
| } |
| |
| static void |
| lqasc_shutdown(struct uart_port *port) |
| { |
| struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); |
| unsigned long flags; |
| |
| ltq_port->soc->free_irq(port); |
| |
| spin_lock_irqsave(<q_port->lock, flags); |
| __raw_writel(0, port->membase + LTQ_ASC_CON); |
| asc_update_bits(ASCRXFCON_RXFEN, ASCRXFCON_RXFFLU, |
| port->membase + LTQ_ASC_RXFCON); |
| asc_update_bits(ASCTXFCON_TXFEN, ASCTXFCON_TXFFLU, |
| port->membase + LTQ_ASC_TXFCON); |
| spin_unlock_irqrestore(<q_port->lock, flags); |
| if (!IS_ERR(ltq_port->clk)) |
| clk_disable_unprepare(ltq_port->clk); |
| } |
| |
| static void |
| lqasc_set_termios(struct uart_port *port, |
| struct ktermios *new, struct ktermios *old) |
| { |
| unsigned int cflag; |
| unsigned int iflag; |
| unsigned int divisor; |
| unsigned int baud; |
| unsigned int con = 0; |
| unsigned long flags; |
| struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); |
| |
| cflag = new->c_cflag; |
| iflag = new->c_iflag; |
| |
| switch (cflag & CSIZE) { |
| case CS7: |
| con = ASCCON_M_7ASYNC; |
| break; |
| |
| case CS5: |
| case CS6: |
| default: |
| new->c_cflag &= ~ CSIZE; |
| new->c_cflag |= CS8; |
| con = ASCCON_M_8ASYNC; |
| break; |
| } |
| |
| cflag &= ~CMSPAR; /* Mark/Space parity is not supported */ |
| |
| if (cflag & CSTOPB) |
| con |= ASCCON_STP; |
| |
| if (cflag & PARENB) { |
| if (!(cflag & PARODD)) |
| con &= ~ASCCON_ODD; |
| else |
| con |= ASCCON_ODD; |
| } |
| |
| port->read_status_mask = ASCSTATE_ROE; |
| if (iflag & INPCK) |
| port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE; |
| |
| port->ignore_status_mask = 0; |
| if (iflag & IGNPAR) |
| port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE; |
| |
| if (iflag & IGNBRK) { |
| /* |
| * If we're ignoring parity and break indicators, |
| * ignore overruns too (for real raw support). |
| */ |
| if (iflag & IGNPAR) |
| port->ignore_status_mask |= ASCSTATE_ROE; |
| } |
| |
| if ((cflag & CREAD) == 0) |
| port->ignore_status_mask |= UART_DUMMY_UER_RX; |
| |
| /* set error signals - framing, parity and overrun, enable receiver */ |
| con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN; |
| |
| spin_lock_irqsave(<q_port->lock, flags); |
| |
| /* set up CON */ |
| asc_update_bits(0, con, port->membase + LTQ_ASC_CON); |
| |
| /* Set baud rate - take a divider of 2 into account */ |
| baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); |
| divisor = uart_get_divisor(port, baud); |
| divisor = divisor / 2 - 1; |
| |
| /* disable the baudrate generator */ |
| asc_update_bits(ASCCON_R, 0, port->membase + LTQ_ASC_CON); |
| |
| /* make sure the fractional divider is off */ |
| asc_update_bits(ASCCON_FDE, 0, port->membase + LTQ_ASC_CON); |
| |
| /* set up to use divisor of 2 */ |
| asc_update_bits(ASCCON_BRS, 0, port->membase + LTQ_ASC_CON); |
| |
| /* now we can write the new baudrate into the register */ |
| __raw_writel(divisor, port->membase + LTQ_ASC_BG); |
| |
| /* turn the baudrate generator back on */ |
| asc_update_bits(0, ASCCON_R, port->membase + LTQ_ASC_CON); |
| |
| /* enable rx */ |
| __raw_writel(ASCWHBSTATE_SETREN, port->membase + LTQ_ASC_WHBSTATE); |
| |
| spin_unlock_irqrestore(<q_port->lock, flags); |
| |
| /* Don't rewrite B0 */ |
| if (tty_termios_baud_rate(new)) |
| tty_termios_encode_baud_rate(new, baud, baud); |
| |
| uart_update_timeout(port, cflag, baud); |
| } |
| |
| static const char* |
| lqasc_type(struct uart_port *port) |
| { |
| if (port->type == PORT_LTQ_ASC) |
| return DRVNAME; |
| else |
| return NULL; |
| } |
| |
| static void |
| lqasc_release_port(struct uart_port *port) |
| { |
| struct platform_device *pdev = to_platform_device(port->dev); |
| |
| if (port->flags & UPF_IOREMAP) { |
| devm_iounmap(&pdev->dev, port->membase); |
| port->membase = NULL; |
| } |
| } |
| |
| static int |
| lqasc_request_port(struct uart_port *port) |
| { |
| struct platform_device *pdev = to_platform_device(port->dev); |
| struct resource *res; |
| int size; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!res) { |
| dev_err(&pdev->dev, "cannot obtain I/O memory region"); |
| return -ENODEV; |
| } |
| size = resource_size(res); |
| |
| res = devm_request_mem_region(&pdev->dev, res->start, |
| size, dev_name(&pdev->dev)); |
| if (!res) { |
| dev_err(&pdev->dev, "cannot request I/O memory region"); |
| return -EBUSY; |
| } |
| |
| if (port->flags & UPF_IOREMAP) { |
| port->membase = devm_ioremap(&pdev->dev, |
| port->mapbase, size); |
| if (port->membase == NULL) |
| return -ENOMEM; |
| } |
| return 0; |
| } |
| |
| static void |
| lqasc_config_port(struct uart_port *port, int flags) |
| { |
| if (flags & UART_CONFIG_TYPE) { |
| port->type = PORT_LTQ_ASC; |
| lqasc_request_port(port); |
| } |
| } |
| |
| static int |
| lqasc_verify_port(struct uart_port *port, |
| struct serial_struct *ser) |
| { |
| int ret = 0; |
| if (ser->type != PORT_UNKNOWN && ser->type != PORT_LTQ_ASC) |
| ret = -EINVAL; |
| if (ser->irq < 0 || ser->irq >= NR_IRQS) |
| ret = -EINVAL; |
| if (ser->baud_base < 9600) |
| ret = -EINVAL; |
| return ret; |
| } |
| |
| static const struct uart_ops lqasc_pops = { |
| .tx_empty = lqasc_tx_empty, |
| .set_mctrl = lqasc_set_mctrl, |
| .get_mctrl = lqasc_get_mctrl, |
| .stop_tx = lqasc_stop_tx, |
| .start_tx = lqasc_start_tx, |
| .stop_rx = lqasc_stop_rx, |
| .break_ctl = lqasc_break_ctl, |
| .startup = lqasc_startup, |
| .shutdown = lqasc_shutdown, |
| .set_termios = lqasc_set_termios, |
| .type = lqasc_type, |
| .release_port = lqasc_release_port, |
| .request_port = lqasc_request_port, |
| .config_port = lqasc_config_port, |
| .verify_port = lqasc_verify_port, |
| }; |
| |
| #ifdef CONFIG_SERIAL_LANTIQ_CONSOLE |
| static void |
| lqasc_console_putchar(struct uart_port *port, unsigned char ch) |
| { |
| int fifofree; |
| |
| if (!port->membase) |
| return; |
| |
| do { |
| fifofree = (__raw_readl(port->membase + LTQ_ASC_FSTAT) |
| & ASCFSTAT_TXFREEMASK) >> ASCFSTAT_TXFREEOFF; |
| } while (fifofree == 0); |
| writeb(ch, port->membase + LTQ_ASC_TBUF); |
| } |
| |
| static void lqasc_serial_port_write(struct uart_port *port, const char *s, |
| u_int count) |
| { |
| uart_console_write(port, s, count, lqasc_console_putchar); |
| } |
| |
| static void |
| lqasc_console_write(struct console *co, const char *s, u_int count) |
| { |
| struct ltq_uart_port *ltq_port; |
| unsigned long flags; |
| |
| if (co->index >= MAXPORTS) |
| return; |
| |
| ltq_port = lqasc_port[co->index]; |
| if (!ltq_port) |
| return; |
| |
| spin_lock_irqsave(<q_port->lock, flags); |
| lqasc_serial_port_write(<q_port->port, s, count); |
| spin_unlock_irqrestore(<q_port->lock, flags); |
| } |
| |
| static int __init |
| lqasc_console_setup(struct console *co, char *options) |
| { |
| struct ltq_uart_port *ltq_port; |
| struct uart_port *port; |
| int baud = 115200; |
| int bits = 8; |
| int parity = 'n'; |
| int flow = 'n'; |
| |
| if (co->index >= MAXPORTS) |
| return -ENODEV; |
| |
| ltq_port = lqasc_port[co->index]; |
| if (!ltq_port) |
| return -ENODEV; |
| |
| port = <q_port->port; |
| |
| if (!IS_ERR(ltq_port->clk)) |
| clk_prepare_enable(ltq_port->clk); |
| |
| port->uartclk = clk_get_rate(ltq_port->freqclk); |
| |
| if (options) |
| uart_parse_options(options, &baud, &parity, &bits, &flow); |
| return uart_set_options(port, co, baud, parity, bits, flow); |
| } |
| |
| static struct console lqasc_console = { |
| .name = "ttyLTQ", |
| .write = lqasc_console_write, |
| .device = uart_console_device, |
| .setup = lqasc_console_setup, |
| .flags = CON_PRINTBUFFER, |
| .index = -1, |
| .data = &lqasc_reg, |
| }; |
| |
| static int __init |
| lqasc_console_init(void) |
| { |
| register_console(&lqasc_console); |
| return 0; |
| } |
| console_initcall(lqasc_console_init); |
| |
| static void lqasc_serial_early_console_write(struct console *co, |
| const char *s, |
| u_int count) |
| { |
| struct earlycon_device *dev = co->data; |
| |
| lqasc_serial_port_write(&dev->port, s, count); |
| } |
| |
| static int __init |
| lqasc_serial_early_console_setup(struct earlycon_device *device, |
| const char *opt) |
| { |
| if (!device->port.membase) |
| return -ENODEV; |
| |
| device->con->write = lqasc_serial_early_console_write; |
| return 0; |
| } |
| OF_EARLYCON_DECLARE(lantiq, "lantiq,asc", lqasc_serial_early_console_setup); |
| OF_EARLYCON_DECLARE(lantiq, "intel,lgm-asc", lqasc_serial_early_console_setup); |
| |
| #define LANTIQ_SERIAL_CONSOLE (&lqasc_console) |
| |
| #else |
| |
| #define LANTIQ_SERIAL_CONSOLE NULL |
| |
| #endif /* CONFIG_SERIAL_LANTIQ_CONSOLE */ |
| |
| static struct uart_driver lqasc_reg = { |
| .owner = THIS_MODULE, |
| .driver_name = DRVNAME, |
| .dev_name = "ttyLTQ", |
| .major = 0, |
| .minor = 0, |
| .nr = MAXPORTS, |
| .cons = LANTIQ_SERIAL_CONSOLE, |
| }; |
| |
| static int fetch_irq_lantiq(struct device *dev, struct ltq_uart_port *ltq_port) |
| { |
| struct uart_port *port = <q_port->port; |
| struct platform_device *pdev = to_platform_device(dev); |
| int irq; |
| |
| irq = platform_get_irq(pdev, 0); |
| if (irq < 0) |
| return irq; |
| ltq_port->tx_irq = irq; |
| irq = platform_get_irq(pdev, 1); |
| if (irq < 0) |
| return irq; |
| ltq_port->rx_irq = irq; |
| irq = platform_get_irq(pdev, 2); |
| if (irq < 0) |
| return irq; |
| ltq_port->err_irq = irq; |
| |
| port->irq = ltq_port->tx_irq; |
| |
| return 0; |
| } |
| |
| static int request_irq_lantiq(struct uart_port *port) |
| { |
| struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); |
| int retval; |
| |
| retval = request_irq(ltq_port->tx_irq, lqasc_tx_int, |
| 0, "asc_tx", port); |
| if (retval) { |
| dev_err(port->dev, "failed to request asc_tx\n"); |
| return retval; |
| } |
| |
| retval = request_irq(ltq_port->rx_irq, lqasc_rx_int, |
| 0, "asc_rx", port); |
| if (retval) { |
| dev_err(port->dev, "failed to request asc_rx\n"); |
| goto err1; |
| } |
| |
| retval = request_irq(ltq_port->err_irq, lqasc_err_int, |
| 0, "asc_err", port); |
| if (retval) { |
| dev_err(port->dev, "failed to request asc_err\n"); |
| goto err2; |
| } |
| return 0; |
| |
| err2: |
| free_irq(ltq_port->rx_irq, port); |
| err1: |
| free_irq(ltq_port->tx_irq, port); |
| return retval; |
| } |
| |
| static void free_irq_lantiq(struct uart_port *port) |
| { |
| struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); |
| |
| free_irq(ltq_port->tx_irq, port); |
| free_irq(ltq_port->rx_irq, port); |
| free_irq(ltq_port->err_irq, port); |
| } |
| |
| static int fetch_irq_intel(struct device *dev, struct ltq_uart_port *ltq_port) |
| { |
| struct uart_port *port = <q_port->port; |
| int ret; |
| |
| ret = platform_get_irq(to_platform_device(dev), 0); |
| if (ret < 0) { |
| dev_err(dev, "failed to fetch IRQ for serial port\n"); |
| return ret; |
| } |
| ltq_port->common_irq = ret; |
| port->irq = ret; |
| |
| return 0; |
| } |
| |
| static int request_irq_intel(struct uart_port *port) |
| { |
| struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); |
| int retval; |
| |
| retval = request_irq(ltq_port->common_irq, lqasc_irq, 0, |
| "asc_irq", port); |
| if (retval) |
| dev_err(port->dev, "failed to request asc_irq\n"); |
| |
| return retval; |
| } |
| |
| static void free_irq_intel(struct uart_port *port) |
| { |
| struct ltq_uart_port *ltq_port = to_ltq_uart_port(port); |
| |
| free_irq(ltq_port->common_irq, port); |
| } |
| |
| static int lqasc_probe(struct platform_device *pdev) |
| { |
| struct device_node *node = pdev->dev.of_node; |
| struct ltq_uart_port *ltq_port; |
| struct uart_port *port; |
| struct resource *mmres; |
| int line; |
| int ret; |
| |
| mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!mmres) { |
| dev_err(&pdev->dev, |
| "failed to get memory for serial port\n"); |
| return -ENODEV; |
| } |
| |
| ltq_port = devm_kzalloc(&pdev->dev, sizeof(struct ltq_uart_port), |
| GFP_KERNEL); |
| if (!ltq_port) |
| return -ENOMEM; |
| |
| port = <q_port->port; |
| |
| ltq_port->soc = of_device_get_match_data(&pdev->dev); |
| ret = ltq_port->soc->fetch_irq(&pdev->dev, ltq_port); |
| if (ret) |
| return ret; |
| |
| /* get serial id */ |
| line = of_alias_get_id(node, "serial"); |
| if (line < 0) { |
| if (IS_ENABLED(CONFIG_LANTIQ)) { |
| if (mmres->start == CPHYSADDR(LTQ_EARLY_ASC)) |
| line = 0; |
| else |
| line = 1; |
| } else { |
| dev_err(&pdev->dev, "failed to get alias id, errno %d\n", |
| line); |
| return line; |
| } |
| } |
| |
| if (lqasc_port[line]) { |
| dev_err(&pdev->dev, "port %d already allocated\n", line); |
| return -EBUSY; |
| } |
| |
| port->iotype = SERIAL_IO_MEM; |
| port->flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP; |
| port->ops = &lqasc_pops; |
| port->fifosize = 16; |
| port->type = PORT_LTQ_ASC; |
| port->line = line; |
| port->dev = &pdev->dev; |
| /* unused, just to be backward-compatible */ |
| port->mapbase = mmres->start; |
| |
| if (IS_ENABLED(CONFIG_LANTIQ) && !IS_ENABLED(CONFIG_COMMON_CLK)) |
| ltq_port->freqclk = clk_get_fpi(); |
| else |
| ltq_port->freqclk = devm_clk_get(&pdev->dev, "freq"); |
| |
| |
| if (IS_ERR(ltq_port->freqclk)) { |
| pr_err("failed to get fpi clk\n"); |
| return -ENOENT; |
| } |
| |
| /* not all asc ports have clock gates, lets ignore the return code */ |
| if (IS_ENABLED(CONFIG_LANTIQ) && !IS_ENABLED(CONFIG_COMMON_CLK)) |
| ltq_port->clk = clk_get(&pdev->dev, NULL); |
| else |
| ltq_port->clk = devm_clk_get(&pdev->dev, "asc"); |
| |
| spin_lock_init(<q_port->lock); |
| lqasc_port[line] = ltq_port; |
| platform_set_drvdata(pdev, ltq_port); |
| |
| ret = uart_add_one_port(&lqasc_reg, port); |
| |
| return ret; |
| } |
| |
| static int lqasc_remove(struct platform_device *pdev) |
| { |
| struct uart_port *port = platform_get_drvdata(pdev); |
| |
| return uart_remove_one_port(&lqasc_reg, port); |
| } |
| |
| static const struct ltq_soc_data soc_data_lantiq = { |
| .fetch_irq = fetch_irq_lantiq, |
| .request_irq = request_irq_lantiq, |
| .free_irq = free_irq_lantiq, |
| }; |
| |
| static const struct ltq_soc_data soc_data_intel = { |
| .fetch_irq = fetch_irq_intel, |
| .request_irq = request_irq_intel, |
| .free_irq = free_irq_intel, |
| }; |
| |
| static const struct of_device_id ltq_asc_match[] = { |
| { .compatible = "lantiq,asc", .data = &soc_data_lantiq }, |
| { .compatible = "intel,lgm-asc", .data = &soc_data_intel }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, ltq_asc_match); |
| |
| static struct platform_driver lqasc_driver = { |
| .probe = lqasc_probe, |
| .remove = lqasc_remove, |
| .driver = { |
| .name = DRVNAME, |
| .of_match_table = ltq_asc_match, |
| }, |
| }; |
| |
| static int __init |
| init_lqasc(void) |
| { |
| int ret; |
| |
| ret = uart_register_driver(&lqasc_reg); |
| if (ret != 0) |
| return ret; |
| |
| ret = platform_driver_register(&lqasc_driver); |
| if (ret != 0) |
| uart_unregister_driver(&lqasc_reg); |
| |
| return ret; |
| } |
| |
| static void __exit exit_lqasc(void) |
| { |
| platform_driver_unregister(&lqasc_driver); |
| uart_unregister_driver(&lqasc_reg); |
| } |
| |
| module_init(init_lqasc); |
| module_exit(exit_lqasc); |
| |
| MODULE_DESCRIPTION("Serial driver for Lantiq & Intel gateway SoCs"); |
| MODULE_LICENSE("GPL v2"); |