| /* linux/arch/arm/mach-s5pc100/dma.c |
| * |
| * Copyright (c) 2011 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * Copyright (C) 2010 Samsung Electronics Co. Ltd. |
| * Jaswinder Singh <jassi.brar@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <linux/dma-mapping.h> |
| #include <linux/amba/bus.h> |
| #include <linux/amba/pl330.h> |
| |
| #include <asm/irq.h> |
| #include <plat/devs.h> |
| #include <plat/irqs.h> |
| |
| #include <mach/map.h> |
| #include <mach/irqs.h> |
| #include <mach/dma.h> |
| |
| static u8 pdma0_peri[] = { |
| DMACH_UART0_RX, |
| DMACH_UART0_TX, |
| DMACH_UART1_RX, |
| DMACH_UART1_TX, |
| DMACH_UART2_RX, |
| DMACH_UART2_TX, |
| DMACH_UART3_RX, |
| DMACH_UART3_TX, |
| DMACH_IRDA, |
| DMACH_I2S0_RX, |
| DMACH_I2S0_TX, |
| DMACH_I2S0S_TX, |
| DMACH_I2S1_RX, |
| DMACH_I2S1_TX, |
| DMACH_I2S2_RX, |
| DMACH_I2S2_TX, |
| DMACH_SPI0_RX, |
| DMACH_SPI0_TX, |
| DMACH_SPI1_RX, |
| DMACH_SPI1_TX, |
| DMACH_SPI2_RX, |
| DMACH_SPI2_TX, |
| DMACH_AC97_MICIN, |
| DMACH_AC97_PCMIN, |
| DMACH_AC97_PCMOUT, |
| DMACH_EXTERNAL, |
| DMACH_PWM, |
| DMACH_SPDIF, |
| DMACH_HSI_RX, |
| DMACH_HSI_TX, |
| }; |
| |
| static struct dma_pl330_platdata s5pc100_pdma0_pdata = { |
| .nr_valid_peri = ARRAY_SIZE(pdma0_peri), |
| .peri_id = pdma0_peri, |
| }; |
| |
| static AMBA_AHB_DEVICE(s5pc100_pdma0, "dma-pl330.0", 0x00041330, |
| S5PC100_PA_PDMA0, {IRQ_PDMA0}, &s5pc100_pdma0_pdata); |
| |
| static u8 pdma1_peri[] = { |
| DMACH_UART0_RX, |
| DMACH_UART0_TX, |
| DMACH_UART1_RX, |
| DMACH_UART1_TX, |
| DMACH_UART2_RX, |
| DMACH_UART2_TX, |
| DMACH_UART3_RX, |
| DMACH_UART3_TX, |
| DMACH_IRDA, |
| DMACH_I2S0_RX, |
| DMACH_I2S0_TX, |
| DMACH_I2S0S_TX, |
| DMACH_I2S1_RX, |
| DMACH_I2S1_TX, |
| DMACH_I2S2_RX, |
| DMACH_I2S2_TX, |
| DMACH_SPI0_RX, |
| DMACH_SPI0_TX, |
| DMACH_SPI1_RX, |
| DMACH_SPI1_TX, |
| DMACH_SPI2_RX, |
| DMACH_SPI2_TX, |
| DMACH_PCM0_RX, |
| DMACH_PCM0_TX, |
| DMACH_PCM1_RX, |
| DMACH_PCM1_TX, |
| DMACH_MSM_REQ0, |
| DMACH_MSM_REQ1, |
| DMACH_MSM_REQ2, |
| DMACH_MSM_REQ3, |
| }; |
| |
| static struct dma_pl330_platdata s5pc100_pdma1_pdata = { |
| .nr_valid_peri = ARRAY_SIZE(pdma1_peri), |
| .peri_id = pdma1_peri, |
| }; |
| |
| static AMBA_AHB_DEVICE(s5pc100_pdma1, "dma-pl330.1", 0x00041330, |
| S5PC100_PA_PDMA1, {IRQ_PDMA1}, &s5pc100_pdma1_pdata); |
| |
| static int __init s5pc100_dma_init(void) |
| { |
| dma_cap_set(DMA_SLAVE, s5pc100_pdma0_pdata.cap_mask); |
| dma_cap_set(DMA_CYCLIC, s5pc100_pdma0_pdata.cap_mask); |
| amba_device_register(&s5pc100_pdma0_device, &iomem_resource); |
| |
| dma_cap_set(DMA_SLAVE, s5pc100_pdma1_pdata.cap_mask); |
| dma_cap_set(DMA_CYCLIC, s5pc100_pdma1_pdata.cap_mask); |
| amba_device_register(&s5pc100_pdma1_device, &iomem_resource); |
| |
| return 0; |
| } |
| arch_initcall(s5pc100_dma_init); |