| // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) |
| /* |
| * Copyright (c) 2023, Linaro Ltd |
| */ |
| |
| #include <dt-bindings/iio/qcom,spmi-vadc.h> |
| #include <dt-bindings/input/input.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/spmi/spmi.h> |
| |
| &spmi_bus { |
| pmic@0 { |
| compatible = "qcom,pm2250", "qcom,spmi-pmic"; |
| reg = <0x0 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pon@800 { |
| compatible = "qcom,pm8916-pon"; |
| reg = <0x800>; |
| |
| pm4125_pwrkey: pwrkey { |
| compatible = "qcom,pm8941-pwrkey"; |
| interrupts-extended = <&spmi_bus 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; |
| linux,code = <KEY_POWER>; |
| debounce = <15625>; |
| bias-pull-up; |
| }; |
| |
| pm4125_resin: resin { |
| compatible = "qcom,pm8941-resin"; |
| interrupts-extended = <&spmi_bus 0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; |
| debounce = <15625>; |
| bias-pull-up; |
| status = "disabled"; |
| }; |
| }; |
| |
| pm4125_vbus: usb-vbus-regulator@1100 { |
| compatible = "qcom,pm4125-vbus-reg", "qcom,pm8150b-vbus-reg"; |
| reg = <0x1100>; |
| status = "disabled"; |
| }; |
| |
| pm4125_typec: typec@1500 { |
| compatible = "qcom,pm4125-typec", "qcom,pmi632-typec"; |
| reg = <0x1500>; |
| interrupts = <0x0 0x15 0x00 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x15 0x01 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x15 0x02 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x15 0x03 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x15 0x04 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x15 0x05 IRQ_TYPE_EDGE_RISING>, |
| <0x0 0x15 0x06 IRQ_TYPE_EDGE_BOTH>, |
| <0x0 0x15 0x07 IRQ_TYPE_EDGE_RISING>; |
| interrupt-names = "or-rid-detect-change", |
| "vpd-detect", |
| "cc-state-change", |
| "vconn-oc", |
| "vbus-change", |
| "attach-detach", |
| "legacy-cable-detect", |
| "try-snk-src-detect"; |
| vdd-vbus-supply = <&pm4125_vbus>; |
| |
| status = "disabled"; |
| }; |
| |
| rtc@6000 { |
| compatible = "qcom,pm8941-rtc"; |
| reg = <0x6000>, <0x6100>; |
| reg-names = "rtc", "alarm"; |
| interrupts-extended = <&spmi_bus 0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; |
| }; |
| |
| pm4125_gpios: gpio@c000 { |
| compatible = "qcom,pm2250-gpio", "qcom,spmi-gpio"; |
| reg = <0xc000>; |
| gpio-controller; |
| gpio-ranges = <&pm4125_gpios 0 0 10>; |
| #gpio-cells = <2>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| }; |
| }; |
| |
| pmic@1 { |
| compatible = "qcom,pm2250", "qcom,spmi-pmic"; |
| reg = <0x1 SPMI_USID>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| }; |
| }; |
