| // SPDX-License-Identifier: BSD-3-Clause |
| /* |
| * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved. |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/regulator/qcom,rpmh-regulator.h> |
| #include "qru1000.dtsi" |
| #include "pm8150.dtsi" |
| |
| / { |
| model = "Qualcomm Technologies, Inc. QRU1000 IDP"; |
| compatible = "qcom,qru1000-idp", "qcom,qru1000"; |
| chassis-type = "embedded"; |
| |
| aliases { |
| serial0 = &uart7; |
| }; |
| |
| chosen { |
| stdout-path = "serial0:115200n8"; |
| }; |
| |
| clocks { |
| xo_board: xo-board-clk { |
| compatible = "fixed-clock"; |
| clock-frequency = <19200000>; |
| #clock-cells = <0>; |
| }; |
| |
| sleep_clk: sleep-clk { |
| compatible = "fixed-clock"; |
| clock-frequency = <32000>; |
| #clock-cells = <0>; |
| }; |
| }; |
| |
| ppvar_sys: ppvar-sys-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "ppvar_sys"; |
| regulator-min-microvolt = <4200000>; |
| regulator-max-microvolt = <4200000>; |
| |
| regulator-always-on; |
| regulator-boot-on; |
| }; |
| |
| vph_pwr: vph-pwr-regulator { |
| compatible = "regulator-fixed"; |
| regulator-name = "vph_pwr"; |
| regulator-min-microvolt = <3700000>; |
| regulator-max-microvolt = <3700000>; |
| |
| regulator-always-on; |
| regulator-boot-on; |
| |
| vin-supply = <&ppvar_sys>; |
| }; |
| }; |
| |
| &apps_rsc { |
| regulators { |
| compatible = "qcom,pm8150-rpmh-regulators"; |
| qcom,pmic-id = "a"; |
| |
| vdd-s1-supply = <&vph_pwr>; |
| vdd-s2-supply = <&vph_pwr>; |
| vdd-s3-supply = <&vph_pwr>; |
| vdd-s4-supply = <&vph_pwr>; |
| vdd-s5-supply = <&vph_pwr>; |
| vdd-s6-supply = <&vph_pwr>; |
| vdd-s7-supply = <&vph_pwr>; |
| vdd-s8-supply = <&vph_pwr>; |
| vdd-s9-supply = <&vph_pwr>; |
| vdd-s10-supply = <&vph_pwr>; |
| |
| vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>; |
| vdd-l2-l10-supply = <&vph_pwr>; |
| vdd-l3-l4-l5-l18-supply = <&vreg_s5a_2p0>; |
| vdd-l6-l9-supply = <&vreg_s6a_0p9>; |
| vdd-l7-l12-l14-l15-supply = <&vreg_s4a_1p8>; |
| vdd-l13-l16-l17-supply = <&vph_pwr>; |
| |
| vreg_s2a_0p5: smps2 { |
| regulator-name = "vreg_s2a_0p5"; |
| regulator-min-microvolt = <320000>; |
| regulator-max-microvolt = <570000>; |
| }; |
| |
| vreg_s3a_1p05: smps3 { |
| regulator-name = "vreg_s3a_1p05"; |
| regulator-min-microvolt = <950000>; |
| regulator-max-microvolt = <1170000>; |
| }; |
| |
| vreg_s4a_1p8: smps4 { |
| regulator-name = "vreg_s4a_1p8"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| |
| vreg_s5a_2p0: smps5 { |
| regulator-name = "vreg_s5a_2p0"; |
| regulator-min-microvolt = <1904000>; |
| regulator-max-microvolt = <2000000>; |
| }; |
| |
| vreg_s6a_0p9: smps6 { |
| regulator-name = "vreg_s6a_0p9"; |
| regulator-min-microvolt = <920000>; |
| regulator-max-microvolt = <1128000>; |
| }; |
| |
| vreg_s7a_1p2: smps7 { |
| regulator-name = "vreg_s7a_1p2"; |
| regulator-min-microvolt = <1200000>; |
| regulator-max-microvolt = <1200000>; |
| }; |
| |
| vreg_s8a_1p3: smps8 { |
| regulator-name = "vreg_s8a_1p3"; |
| regulator-min-microvolt = <1352000>; |
| regulator-max-microvolt = <1352000>; |
| }; |
| |
| vreg_l1a_0p91: ldo1 { |
| regulator-name = "vreg_l1a_0p91"; |
| regulator-min-microvolt = <312000>; |
| regulator-max-microvolt = <1304000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| vreg_l2a_2p3: ldo2 { |
| regulator-name = "vreg_l2a_2p3"; |
| regulator-min-microvolt = <2970000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| vreg_l3a_1p2: ldo3 { |
| regulator-name = "vreg_l3a_1p2"; |
| regulator-min-microvolt = <920000>; |
| regulator-max-microvolt = <1260000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| vreg_l5a_0p8: ldo5 { |
| regulator-name = "vreg_l5a_0p8"; |
| regulator-min-microvolt = <312000>; |
| regulator-max-microvolt = <1304000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| vreg_l6a_0p91: ldo6 { |
| regulator-name = "vreg_l6a_0p91"; |
| regulator-min-microvolt = <880000>; |
| regulator-max-microvolt = <950000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| vreg_l7a_1p8: ldo7 { |
| regulator-name = "vreg_l7a_1p8"; |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| |
| }; |
| |
| vreg_l8a_0p91: ldo8 { |
| regulator-name = "vreg_l8a_0p91"; |
| regulator-min-microvolt = <888000>; |
| regulator-max-microvolt = <925000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| vreg_l9a_0p91: ldo9 { |
| regulator-name = "vreg_l9a_0p91"; |
| regulator-min-microvolt = <312000>; |
| regulator-max-microvolt = <1304000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| vreg_l10a_2p95: ldo10 { |
| regulator-name = "vreg_l10a_2p95"; |
| regulator-min-microvolt = <2700000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| vreg_l11a_0p91: ldo11 { |
| regulator-name = "vreg_l11a_0p91"; |
| regulator-min-microvolt = <800000>; |
| regulator-max-microvolt = <1000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| vreg_l12a_1p8: ldo12 { |
| regulator-name = "vreg_l12a_1p8"; |
| regulator-min-microvolt = <1504000>; |
| regulator-max-microvolt = <1504000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| vreg_l14a_1p8: ldo14 { |
| regulator-name = "vreg_l14a_1p8"; |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <1950000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| vreg_l15a_1p8: ldo15 { |
| regulator-name = "vreg_l15a_1p8"; |
| regulator-min-microvolt = <1504000>; |
| regulator-max-microvolt = <2000000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| vreg_l16a_1p8: ldo16 { |
| regulator-name = "vreg_l16a_1p8"; |
| regulator-min-microvolt = <1710000>; |
| regulator-max-microvolt = <1890000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| vreg_l17a_3p3: ldo17 { |
| regulator-name = "vreg_l17a_3p3"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3544000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| |
| vreg_l18a_1p2: ldo18 { |
| regulator-name = "vreg_l18a_1p2"; |
| regulator-min-microvolt = <312000>; |
| regulator-max-microvolt = <1304000>; |
| regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>; |
| }; |
| }; |
| }; |
| |
| &qup_i2c1_data_clk { |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| &qup_i2c2_data_clk { |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| &qup_i2c3_data_clk { |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| &qup_i2c4_data_clk { |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| &qup_i2c5_data_clk { |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| &qup_i2c6_data_clk { |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| &qup_i2c9_data_clk { |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| &qup_i2c10_data_clk { |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| &qup_i2c11_data_clk { |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| &qup_i2c12_data_clk { |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| &qup_i2c13_data_clk { |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| &qup_i2c14_data_clk { |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| &qup_i2c15_data_clk { |
| drive-strength = <2>; |
| bias-pull-up; |
| }; |
| |
| &qup_spi1_cs { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi1_data_clk { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi2_cs { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi2_data_clk { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi3_cs { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi3_data_clk { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi4_cs { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi4_data_clk { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi5_cs { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi5_data_clk { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi6_cs { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi6_data_clk { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi9_cs { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi9_data_clk { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi10_cs { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi10_data_clk { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi11_cs { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi11_data_clk { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi12_cs { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi12_data_clk { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi13_cs { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi13_data_clk { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi14_cs { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi14_data_clk { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi15_cs { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_spi15_data_clk { |
| drive-strength = <6>; |
| bias-disable; |
| }; |
| |
| &qup_uart7_rx { |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| &qup_uart7_tx { |
| drive-strength = <2>; |
| bias-disable; |
| }; |
| |
| &qupv3_id_0 { |
| status = "okay"; |
| }; |
| |
| &reserved_memory { |
| ecc_meta_data_mem: ecc-meta-data@f0000000 { |
| reg = <0x0 0xf0000000 0x0 0x10000000>; |
| no-map; |
| }; |
| |
| tenx_sp_mem: tenx-sp-buffer@800000000 { |
| reg = <0x8 0x0 0x0 0x80000000>; |
| no-map; |
| }; |
| }; |
| |
| &tlmm { |
| gpio-reserved-ranges = <28 2>; |
| }; |
| |
| &uart7 { |
| status = "okay"; |
| }; |
| |
| &usb_1 { |
| status = "okay"; |
| }; |
| |
| &usb_1_dwc3 { |
| dr_mode = "peripheral"; |
| }; |
| |
| &usb_1_hsphy { |
| vdda-pll-supply = <&vreg_l8a_0p91>; |
| vdda18-supply = <&vreg_l14a_1p8>; |
| vdda33-supply = <&vreg_l2a_2p3>; |
| |
| status = "okay"; |
| }; |
| |
| &usb_1_qmpphy { |
| vdda-phy-supply = <&vreg_l8a_0p91>; |
| vdda-pll-supply = <&vreg_l3a_1p2>; |
| |
| status = "okay"; |
| }; |
