| /* |
| * Copyright IBM Corporation, 2013 |
| * Author Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of version 2.1 of the GNU Lesser General Public License |
| * as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it would be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. |
| * |
| */ |
| |
| /* |
| * PPC64 THP Support for hash based MMUs |
| */ |
| #include <linux/mm.h> |
| #include <asm/machdep.h> |
| |
| int __hash_page_thp(unsigned long ea, unsigned long access, unsigned long vsid, |
| pmd_t *pmdp, unsigned long trap, unsigned long flags, |
| int ssize, unsigned int psize) |
| { |
| unsigned int index, valid; |
| unsigned char *hpte_slot_array; |
| unsigned long rflags, pa, hidx; |
| unsigned long old_pmd, new_pmd; |
| int ret, lpsize = MMU_PAGE_16M; |
| unsigned long vpn, hash, shift, slot; |
| |
| /* |
| * atomically mark the linux large page PMD busy and dirty |
| */ |
| do { |
| pmd_t pmd = READ_ONCE(*pmdp); |
| |
| old_pmd = pmd_val(pmd); |
| /* If PMD busy, retry the access */ |
| if (unlikely(old_pmd & H_PAGE_BUSY)) |
| return 0; |
| /* If PMD permissions don't match, take page fault */ |
| if (unlikely(!check_pte_access(access, old_pmd))) |
| return 1; |
| /* |
| * Try to lock the PTE, add ACCESSED and DIRTY if it was |
| * a write access |
| */ |
| new_pmd = old_pmd | H_PAGE_BUSY | _PAGE_ACCESSED; |
| if (access & _PAGE_WRITE) |
| new_pmd |= _PAGE_DIRTY; |
| } while (!pmd_xchg(pmdp, __pmd(old_pmd), __pmd(new_pmd))); |
| |
| /* |
| * Make sure this is thp or devmap entry |
| */ |
| if (!(old_pmd & (H_PAGE_THP_HUGE | _PAGE_DEVMAP))) |
| return 0; |
| |
| rflags = htab_convert_pte_flags(new_pmd, flags); |
| |
| /* |
| * THPs are only supported on platforms that can do mixed page size |
| * segments (MPSS) and all such platforms have coherent icache. Hence we |
| * don't need to do lazy icache flush (hash_page_do_lazy_icache()) on |
| * noexecute fault. |
| */ |
| |
| /* |
| * Find the slot index details for this ea, using base page size. |
| */ |
| shift = mmu_psize_defs[psize].shift; |
| index = (ea & ~HPAGE_PMD_MASK) >> shift; |
| BUG_ON(index >= PTE_FRAG_SIZE); |
| |
| vpn = hpt_vpn(ea, vsid, ssize); |
| hpte_slot_array = get_hpte_slot_array(pmdp); |
| if (psize == MMU_PAGE_4K) { |
| /* |
| * invalidate the old hpte entry if we have that mapped via 64K |
| * base page size. This is because demote_segment won't flush |
| * hash page table entries. |
| */ |
| if ((old_pmd & H_PAGE_HASHPTE) && !(old_pmd & H_PAGE_COMBO)) { |
| flush_hash_hugepage(vsid, ea, pmdp, MMU_PAGE_64K, |
| ssize, flags); |
| /* |
| * With THP, we also clear the slot information with |
| * respect to all the 64K hash pte mapping the 16MB |
| * page. They are all invalid now. This make sure we |
| * don't find the slot valid when we fault with 4k |
| * base page size. |
| * |
| */ |
| memset(hpte_slot_array, 0, PTE_FRAG_SIZE); |
| } |
| } |
| |
| valid = hpte_valid(hpte_slot_array, index); |
| if (valid) { |
| /* update the hpte bits */ |
| hash = hpt_hash(vpn, shift, ssize); |
| hidx = hpte_hash_index(hpte_slot_array, index); |
| if (hidx & _PTEIDX_SECONDARY) |
| hash = ~hash; |
| slot = (hash & htab_hash_mask) * HPTES_PER_GROUP; |
| slot += hidx & _PTEIDX_GROUP_IX; |
| |
| ret = mmu_hash_ops.hpte_updatepp(slot, rflags, vpn, |
| psize, lpsize, ssize, flags); |
| /* |
| * We failed to update, try to insert a new entry. |
| */ |
| if (ret == -1) { |
| /* |
| * large pte is marked busy, so we can be sure |
| * nobody is looking at hpte_slot_array. hence we can |
| * safely update this here. |
| */ |
| valid = 0; |
| hpte_slot_array[index] = 0; |
| } |
| } |
| |
| if (!valid) { |
| unsigned long hpte_group; |
| |
| hash = hpt_hash(vpn, shift, ssize); |
| /* insert new entry */ |
| pa = pmd_pfn(__pmd(old_pmd)) << PAGE_SHIFT; |
| new_pmd |= H_PAGE_HASHPTE; |
| |
| repeat: |
| hpte_group = (hash & htab_hash_mask) * HPTES_PER_GROUP; |
| |
| /* Insert into the hash table, primary slot */ |
| slot = mmu_hash_ops.hpte_insert(hpte_group, vpn, pa, rflags, 0, |
| psize, lpsize, ssize); |
| /* |
| * Primary is full, try the secondary |
| */ |
| if (unlikely(slot == -1)) { |
| hpte_group = (~hash & htab_hash_mask) * HPTES_PER_GROUP; |
| slot = mmu_hash_ops.hpte_insert(hpte_group, vpn, pa, |
| rflags, |
| HPTE_V_SECONDARY, |
| psize, lpsize, ssize); |
| if (slot == -1) { |
| if (mftb() & 0x1) |
| hpte_group = (hash & htab_hash_mask) * |
| HPTES_PER_GROUP; |
| |
| mmu_hash_ops.hpte_remove(hpte_group); |
| goto repeat; |
| } |
| } |
| /* |
| * Hypervisor failure. Restore old pmd and return -1 |
| * similar to __hash_page_* |
| */ |
| if (unlikely(slot == -2)) { |
| *pmdp = __pmd(old_pmd); |
| hash_failure_debug(ea, access, vsid, trap, ssize, |
| psize, lpsize, old_pmd); |
| return -1; |
| } |
| /* |
| * large pte is marked busy, so we can be sure |
| * nobody is looking at hpte_slot_array. hence we can |
| * safely update this here. |
| */ |
| mark_hpte_slot_valid(hpte_slot_array, index, slot); |
| } |
| /* |
| * Mark the pte with H_PAGE_COMBO, if we are trying to hash it with |
| * base page size 4k. |
| */ |
| if (psize == MMU_PAGE_4K) |
| new_pmd |= H_PAGE_COMBO; |
| /* |
| * The hpte valid is stored in the pgtable whose address is in the |
| * second half of the PMD. Order this against clearing of the busy bit in |
| * huge pmd. |
| */ |
| smp_wmb(); |
| *pmdp = __pmd(new_pmd & ~H_PAGE_BUSY); |
| return 0; |
| } |