| // SPDX-License-Identifier: GPL-2.0-only |
| |
| /* Copyright (c) 2019-2021, The Linux Foundation. All rights reserved. */ |
| /* Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved. */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/bits.h> |
| #include <linux/completion.h> |
| #include <linux/delay.h> |
| #include <linux/dma-buf.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/interrupt.h> |
| #include <linux/kref.h> |
| #include <linux/list.h> |
| #include <linux/math64.h> |
| #include <linux/mm.h> |
| #include <linux/moduleparam.h> |
| #include <linux/scatterlist.h> |
| #include <linux/spinlock.h> |
| #include <linux/srcu.h> |
| #include <linux/types.h> |
| #include <linux/uaccess.h> |
| #include <linux/wait.h> |
| #include <drm/drm_file.h> |
| #include <drm/drm_gem.h> |
| #include <drm/drm_prime.h> |
| #include <drm/drm_print.h> |
| #include <uapi/drm/qaic_accel.h> |
| |
| #include "qaic.h" |
| |
| #define SEM_VAL_MASK GENMASK_ULL(11, 0) |
| #define SEM_INDEX_MASK GENMASK_ULL(4, 0) |
| #define BULK_XFER BIT(3) |
| #define GEN_COMPLETION BIT(4) |
| #define INBOUND_XFER 1 |
| #define OUTBOUND_XFER 2 |
| #define REQHP_OFF 0x0 /* we read this */ |
| #define REQTP_OFF 0x4 /* we write this */ |
| #define RSPHP_OFF 0x8 /* we write this */ |
| #define RSPTP_OFF 0xc /* we read this */ |
| |
| #define ENCODE_SEM(val, index, sync, cmd, flags) \ |
| ({ \ |
| FIELD_PREP(GENMASK(11, 0), (val)) | \ |
| FIELD_PREP(GENMASK(20, 16), (index)) | \ |
| FIELD_PREP(BIT(22), (sync)) | \ |
| FIELD_PREP(GENMASK(26, 24), (cmd)) | \ |
| FIELD_PREP(GENMASK(30, 29), (flags)) | \ |
| FIELD_PREP(BIT(31), (cmd) ? 1 : 0); \ |
| }) |
| #define NUM_EVENTS 128 |
| #define NUM_DELAYS 10 |
| #define fifo_at(base, offset) ((base) + (offset) * get_dbc_req_elem_size()) |
| |
| static unsigned int wait_exec_default_timeout_ms = 5000; /* 5 sec default */ |
| module_param(wait_exec_default_timeout_ms, uint, 0600); |
| MODULE_PARM_DESC(wait_exec_default_timeout_ms, "Default timeout for DRM_IOCTL_QAIC_WAIT_BO"); |
| |
| static unsigned int datapath_poll_interval_us = 100; /* 100 usec default */ |
| module_param(datapath_poll_interval_us, uint, 0600); |
| MODULE_PARM_DESC(datapath_poll_interval_us, |
| "Amount of time to sleep between activity when datapath polling is enabled"); |
| |
| struct dbc_req { |
| /* |
| * A request ID is assigned to each memory handle going in DMA queue. |
| * As a single memory handle can enqueue multiple elements in DMA queue |
| * all of them will have the same request ID. |
| */ |
| __le16 req_id; |
| /* Future use */ |
| __u8 seq_id; |
| /* |
| * Special encoded variable |
| * 7 0 - Do not force to generate MSI after DMA is completed |
| * 1 - Force to generate MSI after DMA is completed |
| * 6:5 Reserved |
| * 4 1 - Generate completion element in the response queue |
| * 0 - No Completion Code |
| * 3 0 - DMA request is a Link list transfer |
| * 1 - DMA request is a Bulk transfer |
| * 2 Reserved |
| * 1:0 00 - No DMA transfer involved |
| * 01 - DMA transfer is part of inbound transfer |
| * 10 - DMA transfer has outbound transfer |
| * 11 - NA |
| */ |
| __u8 cmd; |
| __le32 resv; |
| /* Source address for the transfer */ |
| __le64 src_addr; |
| /* Destination address for the transfer */ |
| __le64 dest_addr; |
| /* Length of transfer request */ |
| __le32 len; |
| __le32 resv2; |
| /* Doorbell address */ |
| __le64 db_addr; |
| /* |
| * Special encoded variable |
| * 7 1 - Doorbell(db) write |
| * 0 - No doorbell write |
| * 6:2 Reserved |
| * 1:0 00 - 32 bit access, db address must be aligned to 32bit-boundary |
| * 01 - 16 bit access, db address must be aligned to 16bit-boundary |
| * 10 - 8 bit access, db address must be aligned to 8bit-boundary |
| * 11 - Reserved |
| */ |
| __u8 db_len; |
| __u8 resv3; |
| __le16 resv4; |
| /* 32 bit data written to doorbell address */ |
| __le32 db_data; |
| /* |
| * Special encoded variable |
| * All the fields of sem_cmdX are passed from user and all are ORed |
| * together to form sem_cmd. |
| * 0:11 Semaphore value |
| * 15:12 Reserved |
| * 20:16 Semaphore index |
| * 21 Reserved |
| * 22 Semaphore Sync |
| * 23 Reserved |
| * 26:24 Semaphore command |
| * 28:27 Reserved |
| * 29 Semaphore DMA out bound sync fence |
| * 30 Semaphore DMA in bound sync fence |
| * 31 Enable semaphore command |
| */ |
| __le32 sem_cmd0; |
| __le32 sem_cmd1; |
| __le32 sem_cmd2; |
| __le32 sem_cmd3; |
| } __packed; |
| |
| struct dbc_rsp { |
| /* Request ID of the memory handle whose DMA transaction is completed */ |
| __le16 req_id; |
| /* Status of the DMA transaction. 0 : Success otherwise failure */ |
| __le16 status; |
| } __packed; |
| |
| static inline bool bo_queued(struct qaic_bo *bo) |
| { |
| return !list_empty(&bo->xfer_list); |
| } |
| |
| inline int get_dbc_req_elem_size(void) |
| { |
| return sizeof(struct dbc_req); |
| } |
| |
| inline int get_dbc_rsp_elem_size(void) |
| { |
| return sizeof(struct dbc_rsp); |
| } |
| |
| static void free_slice(struct kref *kref) |
| { |
| struct bo_slice *slice = container_of(kref, struct bo_slice, ref_count); |
| |
| slice->bo->total_slice_nents -= slice->nents; |
| list_del(&slice->slice); |
| drm_gem_object_put(&slice->bo->base); |
| sg_free_table(slice->sgt); |
| kfree(slice->sgt); |
| kfree(slice->reqs); |
| kfree(slice); |
| } |
| |
| static int clone_range_of_sgt_for_slice(struct qaic_device *qdev, struct sg_table **sgt_out, |
| struct sg_table *sgt_in, u64 size, u64 offset) |
| { |
| int total_len, len, nents, offf = 0, offl = 0; |
| struct scatterlist *sg, *sgn, *sgf, *sgl; |
| struct sg_table *sgt; |
| int ret, j; |
| |
| /* find out number of relevant nents needed for this mem */ |
| total_len = 0; |
| sgf = NULL; |
| sgl = NULL; |
| nents = 0; |
| |
| size = size ? size : PAGE_SIZE; |
| for (sg = sgt_in->sgl; sg; sg = sg_next(sg)) { |
| len = sg_dma_len(sg); |
| |
| if (!len) |
| continue; |
| if (offset >= total_len && offset < total_len + len) { |
| sgf = sg; |
| offf = offset - total_len; |
| } |
| if (sgf) |
| nents++; |
| if (offset + size >= total_len && |
| offset + size <= total_len + len) { |
| sgl = sg; |
| offl = offset + size - total_len; |
| break; |
| } |
| total_len += len; |
| } |
| |
| if (!sgf || !sgl) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| sgt = kzalloc(sizeof(*sgt), GFP_KERNEL); |
| if (!sgt) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| ret = sg_alloc_table(sgt, nents, GFP_KERNEL); |
| if (ret) |
| goto free_sgt; |
| |
| /* copy relevant sg node and fix page and length */ |
| sgn = sgf; |
| for_each_sgtable_sg(sgt, sg, j) { |
| memcpy(sg, sgn, sizeof(*sg)); |
| if (sgn == sgf) { |
| sg_dma_address(sg) += offf; |
| sg_dma_len(sg) -= offf; |
| sg_set_page(sg, sg_page(sgn), sg_dma_len(sg), offf); |
| } else { |
| offf = 0; |
| } |
| if (sgn == sgl) { |
| sg_dma_len(sg) = offl - offf; |
| sg_set_page(sg, sg_page(sgn), offl - offf, offf); |
| sg_mark_end(sg); |
| break; |
| } |
| sgn = sg_next(sgn); |
| } |
| |
| *sgt_out = sgt; |
| return ret; |
| |
| free_sgt: |
| kfree(sgt); |
| out: |
| *sgt_out = NULL; |
| return ret; |
| } |
| |
| static int encode_reqs(struct qaic_device *qdev, struct bo_slice *slice, |
| struct qaic_attach_slice_entry *req) |
| { |
| __le64 db_addr = cpu_to_le64(req->db_addr); |
| __le32 db_data = cpu_to_le32(req->db_data); |
| struct scatterlist *sg; |
| __u8 cmd = BULK_XFER; |
| int presync_sem; |
| u64 dev_addr; |
| __u8 db_len; |
| int i; |
| |
| if (!slice->no_xfer) |
| cmd |= (slice->dir == DMA_TO_DEVICE ? INBOUND_XFER : OUTBOUND_XFER); |
| |
| if (req->db_len && !IS_ALIGNED(req->db_addr, req->db_len / 8)) |
| return -EINVAL; |
| |
| presync_sem = req->sem0.presync + req->sem1.presync + req->sem2.presync + req->sem3.presync; |
| if (presync_sem > 1) |
| return -EINVAL; |
| |
| presync_sem = req->sem0.presync << 0 | req->sem1.presync << 1 | |
| req->sem2.presync << 2 | req->sem3.presync << 3; |
| |
| switch (req->db_len) { |
| case 32: |
| db_len = BIT(7); |
| break; |
| case 16: |
| db_len = BIT(7) | 1; |
| break; |
| case 8: |
| db_len = BIT(7) | 2; |
| break; |
| case 0: |
| db_len = 0; /* doorbell is not active for this command */ |
| break; |
| default: |
| return -EINVAL; /* should never hit this */ |
| } |
| |
| /* |
| * When we end up splitting up a single request (ie a buf slice) into |
| * multiple DMA requests, we have to manage the sync data carefully. |
| * There can only be one presync sem. That needs to be on every xfer |
| * so that the DMA engine doesn't transfer data before the receiver is |
| * ready. We only do the doorbell and postsync sems after the xfer. |
| * To guarantee previous xfers for the request are complete, we use a |
| * fence. |
| */ |
| dev_addr = req->dev_addr; |
| for_each_sgtable_sg(slice->sgt, sg, i) { |
| slice->reqs[i].cmd = cmd; |
| slice->reqs[i].src_addr = cpu_to_le64(slice->dir == DMA_TO_DEVICE ? |
| sg_dma_address(sg) : dev_addr); |
| slice->reqs[i].dest_addr = cpu_to_le64(slice->dir == DMA_TO_DEVICE ? |
| dev_addr : sg_dma_address(sg)); |
| /* |
| * sg_dma_len(sg) returns size of a DMA segment, maximum DMA |
| * segment size is set to UINT_MAX by qaic and hence return |
| * values of sg_dma_len(sg) can never exceed u32 range. So, |
| * by down sizing we are not corrupting the value. |
| */ |
| slice->reqs[i].len = cpu_to_le32((u32)sg_dma_len(sg)); |
| switch (presync_sem) { |
| case BIT(0): |
| slice->reqs[i].sem_cmd0 = cpu_to_le32(ENCODE_SEM(req->sem0.val, |
| req->sem0.index, |
| req->sem0.presync, |
| req->sem0.cmd, |
| req->sem0.flags)); |
| break; |
| case BIT(1): |
| slice->reqs[i].sem_cmd1 = cpu_to_le32(ENCODE_SEM(req->sem1.val, |
| req->sem1.index, |
| req->sem1.presync, |
| req->sem1.cmd, |
| req->sem1.flags)); |
| break; |
| case BIT(2): |
| slice->reqs[i].sem_cmd2 = cpu_to_le32(ENCODE_SEM(req->sem2.val, |
| req->sem2.index, |
| req->sem2.presync, |
| req->sem2.cmd, |
| req->sem2.flags)); |
| break; |
| case BIT(3): |
| slice->reqs[i].sem_cmd3 = cpu_to_le32(ENCODE_SEM(req->sem3.val, |
| req->sem3.index, |
| req->sem3.presync, |
| req->sem3.cmd, |
| req->sem3.flags)); |
| break; |
| } |
| dev_addr += sg_dma_len(sg); |
| } |
| /* add post transfer stuff to last segment */ |
| i--; |
| slice->reqs[i].cmd |= GEN_COMPLETION; |
| slice->reqs[i].db_addr = db_addr; |
| slice->reqs[i].db_len = db_len; |
| slice->reqs[i].db_data = db_data; |
| /* |
| * Add a fence if we have more than one request going to the hardware |
| * representing the entirety of the user request, and the user request |
| * has no presync condition. |
| * Fences are expensive, so we try to avoid them. We rely on the |
| * hardware behavior to avoid needing one when there is a presync |
| * condition. When a presync exists, all requests for that same |
| * presync will be queued into a fifo. Thus, since we queue the |
| * post xfer activity only on the last request we queue, the hardware |
| * will ensure that the last queued request is processed last, thus |
| * making sure the post xfer activity happens at the right time without |
| * a fence. |
| */ |
| if (i && !presync_sem) |
| req->sem0.flags |= (slice->dir == DMA_TO_DEVICE ? |
| QAIC_SEM_INSYNCFENCE : QAIC_SEM_OUTSYNCFENCE); |
| slice->reqs[i].sem_cmd0 = cpu_to_le32(ENCODE_SEM(req->sem0.val, req->sem0.index, |
| req->sem0.presync, req->sem0.cmd, |
| req->sem0.flags)); |
| slice->reqs[i].sem_cmd1 = cpu_to_le32(ENCODE_SEM(req->sem1.val, req->sem1.index, |
| req->sem1.presync, req->sem1.cmd, |
| req->sem1.flags)); |
| slice->reqs[i].sem_cmd2 = cpu_to_le32(ENCODE_SEM(req->sem2.val, req->sem2.index, |
| req->sem2.presync, req->sem2.cmd, |
| req->sem2.flags)); |
| slice->reqs[i].sem_cmd3 = cpu_to_le32(ENCODE_SEM(req->sem3.val, req->sem3.index, |
| req->sem3.presync, req->sem3.cmd, |
| req->sem3.flags)); |
| |
| return 0; |
| } |
| |
| static int qaic_map_one_slice(struct qaic_device *qdev, struct qaic_bo *bo, |
| struct qaic_attach_slice_entry *slice_ent) |
| { |
| struct sg_table *sgt = NULL; |
| struct bo_slice *slice; |
| int ret; |
| |
| ret = clone_range_of_sgt_for_slice(qdev, &sgt, bo->sgt, slice_ent->size, slice_ent->offset); |
| if (ret) |
| goto out; |
| |
| slice = kmalloc(sizeof(*slice), GFP_KERNEL); |
| if (!slice) { |
| ret = -ENOMEM; |
| goto free_sgt; |
| } |
| |
| slice->reqs = kcalloc(sgt->nents, sizeof(*slice->reqs), GFP_KERNEL); |
| if (!slice->reqs) { |
| ret = -ENOMEM; |
| goto free_slice; |
| } |
| |
| slice->no_xfer = !slice_ent->size; |
| slice->sgt = sgt; |
| slice->nents = sgt->nents; |
| slice->dir = bo->dir; |
| slice->bo = bo; |
| slice->size = slice_ent->size; |
| slice->offset = slice_ent->offset; |
| |
| ret = encode_reqs(qdev, slice, slice_ent); |
| if (ret) |
| goto free_req; |
| |
| bo->total_slice_nents += sgt->nents; |
| kref_init(&slice->ref_count); |
| drm_gem_object_get(&bo->base); |
| list_add_tail(&slice->slice, &bo->slices); |
| |
| return 0; |
| |
| free_req: |
| kfree(slice->reqs); |
| free_slice: |
| kfree(slice); |
| free_sgt: |
| sg_free_table(sgt); |
| kfree(sgt); |
| out: |
| return ret; |
| } |
| |
| static int create_sgt(struct qaic_device *qdev, struct sg_table **sgt_out, u64 size) |
| { |
| struct scatterlist *sg; |
| struct sg_table *sgt; |
| struct page **pages; |
| int *pages_order; |
| int buf_extra; |
| int max_order; |
| int nr_pages; |
| int ret = 0; |
| int i, j, k; |
| int order; |
| |
| if (size) { |
| nr_pages = DIV_ROUND_UP(size, PAGE_SIZE); |
| /* |
| * calculate how much extra we are going to allocate, to remove |
| * later |
| */ |
| buf_extra = (PAGE_SIZE - size % PAGE_SIZE) % PAGE_SIZE; |
| max_order = min(MAX_PAGE_ORDER, get_order(size)); |
| } else { |
| /* allocate a single page for book keeping */ |
| nr_pages = 1; |
| buf_extra = 0; |
| max_order = 0; |
| } |
| |
| pages = kvmalloc_array(nr_pages, sizeof(*pages) + sizeof(*pages_order), GFP_KERNEL); |
| if (!pages) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| pages_order = (void *)pages + sizeof(*pages) * nr_pages; |
| |
| /* |
| * Allocate requested memory using alloc_pages. It is possible to allocate |
| * the requested memory in multiple chunks by calling alloc_pages |
| * multiple times. Use SG table to handle multiple allocated pages. |
| */ |
| i = 0; |
| while (nr_pages > 0) { |
| order = min(get_order(nr_pages * PAGE_SIZE), max_order); |
| while (1) { |
| pages[i] = alloc_pages(GFP_KERNEL | GFP_HIGHUSER | |
| __GFP_NOWARN | __GFP_ZERO | |
| (order ? __GFP_NORETRY : __GFP_RETRY_MAYFAIL), |
| order); |
| if (pages[i]) |
| break; |
| if (!order--) { |
| ret = -ENOMEM; |
| goto free_partial_alloc; |
| } |
| } |
| |
| max_order = order; |
| pages_order[i] = order; |
| |
| nr_pages -= 1 << order; |
| if (nr_pages <= 0) |
| /* account for over allocation */ |
| buf_extra += abs(nr_pages) * PAGE_SIZE; |
| i++; |
| } |
| |
| sgt = kmalloc(sizeof(*sgt), GFP_KERNEL); |
| if (!sgt) { |
| ret = -ENOMEM; |
| goto free_partial_alloc; |
| } |
| |
| if (sg_alloc_table(sgt, i, GFP_KERNEL)) { |
| ret = -ENOMEM; |
| goto free_sgt; |
| } |
| |
| /* Populate the SG table with the allocated memory pages */ |
| sg = sgt->sgl; |
| for (k = 0; k < i; k++, sg = sg_next(sg)) { |
| /* Last entry requires special handling */ |
| if (k < i - 1) { |
| sg_set_page(sg, pages[k], PAGE_SIZE << pages_order[k], 0); |
| } else { |
| sg_set_page(sg, pages[k], (PAGE_SIZE << pages_order[k]) - buf_extra, 0); |
| sg_mark_end(sg); |
| } |
| } |
| |
| kvfree(pages); |
| *sgt_out = sgt; |
| return ret; |
| |
| free_sgt: |
| kfree(sgt); |
| free_partial_alloc: |
| for (j = 0; j < i; j++) |
| __free_pages(pages[j], pages_order[j]); |
| kvfree(pages); |
| out: |
| *sgt_out = NULL; |
| return ret; |
| } |
| |
| static bool invalid_sem(struct qaic_sem *sem) |
| { |
| if (sem->val & ~SEM_VAL_MASK || sem->index & ~SEM_INDEX_MASK || |
| !(sem->presync == 0 || sem->presync == 1) || sem->pad || |
| sem->flags & ~(QAIC_SEM_INSYNCFENCE | QAIC_SEM_OUTSYNCFENCE) || |
| sem->cmd > QAIC_SEM_WAIT_GT_0) |
| return true; |
| return false; |
| } |
| |
| static int qaic_validate_req(struct qaic_device *qdev, struct qaic_attach_slice_entry *slice_ent, |
| u32 count, u64 total_size) |
| { |
| int i; |
| |
| for (i = 0; i < count; i++) { |
| if (!(slice_ent[i].db_len == 32 || slice_ent[i].db_len == 16 || |
| slice_ent[i].db_len == 8 || slice_ent[i].db_len == 0) || |
| invalid_sem(&slice_ent[i].sem0) || invalid_sem(&slice_ent[i].sem1) || |
| invalid_sem(&slice_ent[i].sem2) || invalid_sem(&slice_ent[i].sem3)) |
| return -EINVAL; |
| |
| if (slice_ent[i].offset + slice_ent[i].size > total_size) |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void qaic_free_sgt(struct sg_table *sgt) |
| { |
| struct scatterlist *sg; |
| |
| if (!sgt) |
| return; |
| |
| for (sg = sgt->sgl; sg; sg = sg_next(sg)) |
| if (sg_page(sg)) |
| __free_pages(sg_page(sg), get_order(sg->length)); |
| sg_free_table(sgt); |
| kfree(sgt); |
| } |
| |
| static void qaic_gem_print_info(struct drm_printer *p, unsigned int indent, |
| const struct drm_gem_object *obj) |
| { |
| struct qaic_bo *bo = to_qaic_bo(obj); |
| |
| drm_printf_indent(p, indent, "BO DMA direction %d\n", bo->dir); |
| } |
| |
| static const struct vm_operations_struct drm_vm_ops = { |
| .open = drm_gem_vm_open, |
| .close = drm_gem_vm_close, |
| }; |
| |
| static int qaic_gem_object_mmap(struct drm_gem_object *obj, struct vm_area_struct *vma) |
| { |
| struct qaic_bo *bo = to_qaic_bo(obj); |
| unsigned long offset = 0; |
| struct scatterlist *sg; |
| int ret = 0; |
| |
| if (obj->import_attach) |
| return -EINVAL; |
| |
| for (sg = bo->sgt->sgl; sg; sg = sg_next(sg)) { |
| if (sg_page(sg)) { |
| ret = remap_pfn_range(vma, vma->vm_start + offset, page_to_pfn(sg_page(sg)), |
| sg->length, vma->vm_page_prot); |
| if (ret) |
| goto out; |
| offset += sg->length; |
| } |
| } |
| |
| out: |
| return ret; |
| } |
| |
| static void qaic_free_object(struct drm_gem_object *obj) |
| { |
| struct qaic_bo *bo = to_qaic_bo(obj); |
| |
| if (obj->import_attach) { |
| /* DMABUF/PRIME Path */ |
| drm_prime_gem_destroy(obj, NULL); |
| } else { |
| /* Private buffer allocation path */ |
| qaic_free_sgt(bo->sgt); |
| } |
| |
| mutex_destroy(&bo->lock); |
| drm_gem_object_release(obj); |
| kfree(bo); |
| } |
| |
| static const struct drm_gem_object_funcs qaic_gem_funcs = { |
| .free = qaic_free_object, |
| .print_info = qaic_gem_print_info, |
| .mmap = qaic_gem_object_mmap, |
| .vm_ops = &drm_vm_ops, |
| }; |
| |
| static void qaic_init_bo(struct qaic_bo *bo, bool reinit) |
| { |
| if (reinit) { |
| bo->sliced = false; |
| reinit_completion(&bo->xfer_done); |
| } else { |
| mutex_init(&bo->lock); |
| init_completion(&bo->xfer_done); |
| } |
| complete_all(&bo->xfer_done); |
| INIT_LIST_HEAD(&bo->slices); |
| INIT_LIST_HEAD(&bo->xfer_list); |
| } |
| |
| static struct qaic_bo *qaic_alloc_init_bo(void) |
| { |
| struct qaic_bo *bo; |
| |
| bo = kzalloc(sizeof(*bo), GFP_KERNEL); |
| if (!bo) |
| return ERR_PTR(-ENOMEM); |
| |
| qaic_init_bo(bo, false); |
| |
| return bo; |
| } |
| |
| int qaic_create_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) |
| { |
| struct qaic_create_bo *args = data; |
| int usr_rcu_id, qdev_rcu_id; |
| struct drm_gem_object *obj; |
| struct qaic_device *qdev; |
| struct qaic_user *usr; |
| struct qaic_bo *bo; |
| size_t size; |
| int ret; |
| |
| if (args->pad) |
| return -EINVAL; |
| |
| size = PAGE_ALIGN(args->size); |
| if (size == 0) |
| return -EINVAL; |
| |
| usr = file_priv->driver_priv; |
| usr_rcu_id = srcu_read_lock(&usr->qddev_lock); |
| if (!usr->qddev) { |
| ret = -ENODEV; |
| goto unlock_usr_srcu; |
| } |
| |
| qdev = usr->qddev->qdev; |
| qdev_rcu_id = srcu_read_lock(&qdev->dev_lock); |
| if (qdev->dev_state != QAIC_ONLINE) { |
| ret = -ENODEV; |
| goto unlock_dev_srcu; |
| } |
| |
| bo = qaic_alloc_init_bo(); |
| if (IS_ERR(bo)) { |
| ret = PTR_ERR(bo); |
| goto unlock_dev_srcu; |
| } |
| obj = &bo->base; |
| |
| drm_gem_private_object_init(dev, obj, size); |
| |
| obj->funcs = &qaic_gem_funcs; |
| ret = create_sgt(qdev, &bo->sgt, size); |
| if (ret) |
| goto free_bo; |
| |
| ret = drm_gem_create_mmap_offset(obj); |
| if (ret) |
| goto free_bo; |
| |
| ret = drm_gem_handle_create(file_priv, obj, &args->handle); |
| if (ret) |
| goto free_bo; |
| |
| bo->handle = args->handle; |
| drm_gem_object_put(obj); |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); |
| |
| return 0; |
| |
| free_bo: |
| drm_gem_object_put(obj); |
| unlock_dev_srcu: |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); |
| unlock_usr_srcu: |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); |
| return ret; |
| } |
| |
| int qaic_mmap_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) |
| { |
| struct qaic_mmap_bo *args = data; |
| int usr_rcu_id, qdev_rcu_id; |
| struct drm_gem_object *obj; |
| struct qaic_device *qdev; |
| struct qaic_user *usr; |
| int ret = 0; |
| |
| usr = file_priv->driver_priv; |
| usr_rcu_id = srcu_read_lock(&usr->qddev_lock); |
| if (!usr->qddev) { |
| ret = -ENODEV; |
| goto unlock_usr_srcu; |
| } |
| |
| qdev = usr->qddev->qdev; |
| qdev_rcu_id = srcu_read_lock(&qdev->dev_lock); |
| if (qdev->dev_state != QAIC_ONLINE) { |
| ret = -ENODEV; |
| goto unlock_dev_srcu; |
| } |
| |
| obj = drm_gem_object_lookup(file_priv, args->handle); |
| if (!obj) { |
| ret = -ENOENT; |
| goto unlock_dev_srcu; |
| } |
| |
| args->offset = drm_vma_node_offset_addr(&obj->vma_node); |
| |
| drm_gem_object_put(obj); |
| |
| unlock_dev_srcu: |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); |
| unlock_usr_srcu: |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); |
| return ret; |
| } |
| |
| struct drm_gem_object *qaic_gem_prime_import(struct drm_device *dev, struct dma_buf *dma_buf) |
| { |
| struct dma_buf_attachment *attach; |
| struct drm_gem_object *obj; |
| struct qaic_bo *bo; |
| int ret; |
| |
| bo = qaic_alloc_init_bo(); |
| if (IS_ERR(bo)) { |
| ret = PTR_ERR(bo); |
| goto out; |
| } |
| |
| obj = &bo->base; |
| get_dma_buf(dma_buf); |
| |
| attach = dma_buf_attach(dma_buf, dev->dev); |
| if (IS_ERR(attach)) { |
| ret = PTR_ERR(attach); |
| goto attach_fail; |
| } |
| |
| if (!attach->dmabuf->size) { |
| ret = -EINVAL; |
| goto size_align_fail; |
| } |
| |
| drm_gem_private_object_init(dev, obj, attach->dmabuf->size); |
| /* |
| * skipping dma_buf_map_attachment() as we do not know the direction |
| * just yet. Once the direction is known in the subsequent IOCTL to |
| * attach slicing, we can do it then. |
| */ |
| |
| obj->funcs = &qaic_gem_funcs; |
| obj->import_attach = attach; |
| obj->resv = dma_buf->resv; |
| |
| return obj; |
| |
| size_align_fail: |
| dma_buf_detach(dma_buf, attach); |
| attach_fail: |
| dma_buf_put(dma_buf); |
| kfree(bo); |
| out: |
| return ERR_PTR(ret); |
| } |
| |
| static int qaic_prepare_import_bo(struct qaic_bo *bo, struct qaic_attach_slice_hdr *hdr) |
| { |
| struct drm_gem_object *obj = &bo->base; |
| struct sg_table *sgt; |
| int ret; |
| |
| sgt = dma_buf_map_attachment(obj->import_attach, hdr->dir); |
| if (IS_ERR(sgt)) { |
| ret = PTR_ERR(sgt); |
| return ret; |
| } |
| |
| bo->sgt = sgt; |
| |
| return 0; |
| } |
| |
| static int qaic_prepare_export_bo(struct qaic_device *qdev, struct qaic_bo *bo, |
| struct qaic_attach_slice_hdr *hdr) |
| { |
| int ret; |
| |
| ret = dma_map_sgtable(&qdev->pdev->dev, bo->sgt, hdr->dir, 0); |
| if (ret) |
| return -EFAULT; |
| |
| return 0; |
| } |
| |
| static int qaic_prepare_bo(struct qaic_device *qdev, struct qaic_bo *bo, |
| struct qaic_attach_slice_hdr *hdr) |
| { |
| int ret; |
| |
| if (bo->base.import_attach) |
| ret = qaic_prepare_import_bo(bo, hdr); |
| else |
| ret = qaic_prepare_export_bo(qdev, bo, hdr); |
| bo->dir = hdr->dir; |
| bo->dbc = &qdev->dbc[hdr->dbc_id]; |
| bo->nr_slice = hdr->count; |
| |
| return ret; |
| } |
| |
| static void qaic_unprepare_import_bo(struct qaic_bo *bo) |
| { |
| dma_buf_unmap_attachment(bo->base.import_attach, bo->sgt, bo->dir); |
| bo->sgt = NULL; |
| } |
| |
| static void qaic_unprepare_export_bo(struct qaic_device *qdev, struct qaic_bo *bo) |
| { |
| dma_unmap_sgtable(&qdev->pdev->dev, bo->sgt, bo->dir, 0); |
| } |
| |
| static void qaic_unprepare_bo(struct qaic_device *qdev, struct qaic_bo *bo) |
| { |
| if (bo->base.import_attach) |
| qaic_unprepare_import_bo(bo); |
| else |
| qaic_unprepare_export_bo(qdev, bo); |
| |
| bo->dir = 0; |
| bo->dbc = NULL; |
| bo->nr_slice = 0; |
| } |
| |
| static void qaic_free_slices_bo(struct qaic_bo *bo) |
| { |
| struct bo_slice *slice, *temp; |
| |
| list_for_each_entry_safe(slice, temp, &bo->slices, slice) |
| kref_put(&slice->ref_count, free_slice); |
| if (WARN_ON_ONCE(bo->total_slice_nents != 0)) |
| bo->total_slice_nents = 0; |
| bo->nr_slice = 0; |
| } |
| |
| static int qaic_attach_slicing_bo(struct qaic_device *qdev, struct qaic_bo *bo, |
| struct qaic_attach_slice_hdr *hdr, |
| struct qaic_attach_slice_entry *slice_ent) |
| { |
| int ret, i; |
| |
| for (i = 0; i < hdr->count; i++) { |
| ret = qaic_map_one_slice(qdev, bo, &slice_ent[i]); |
| if (ret) { |
| qaic_free_slices_bo(bo); |
| return ret; |
| } |
| } |
| |
| if (bo->total_slice_nents > bo->dbc->nelem) { |
| qaic_free_slices_bo(bo); |
| return -ENOSPC; |
| } |
| |
| return 0; |
| } |
| |
| int qaic_attach_slice_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) |
| { |
| struct qaic_attach_slice_entry *slice_ent; |
| struct qaic_attach_slice *args = data; |
| int rcu_id, usr_rcu_id, qdev_rcu_id; |
| struct dma_bridge_chan *dbc; |
| struct drm_gem_object *obj; |
| struct qaic_device *qdev; |
| unsigned long arg_size; |
| struct qaic_user *usr; |
| u8 __user *user_data; |
| struct qaic_bo *bo; |
| int ret; |
| |
| if (args->hdr.count == 0) |
| return -EINVAL; |
| |
| arg_size = args->hdr.count * sizeof(*slice_ent); |
| if (arg_size / args->hdr.count != sizeof(*slice_ent)) |
| return -EINVAL; |
| |
| if (!(args->hdr.dir == DMA_TO_DEVICE || args->hdr.dir == DMA_FROM_DEVICE)) |
| return -EINVAL; |
| |
| if (args->data == 0) |
| return -EINVAL; |
| |
| usr = file_priv->driver_priv; |
| usr_rcu_id = srcu_read_lock(&usr->qddev_lock); |
| if (!usr->qddev) { |
| ret = -ENODEV; |
| goto unlock_usr_srcu; |
| } |
| |
| qdev = usr->qddev->qdev; |
| qdev_rcu_id = srcu_read_lock(&qdev->dev_lock); |
| if (qdev->dev_state != QAIC_ONLINE) { |
| ret = -ENODEV; |
| goto unlock_dev_srcu; |
| } |
| |
| if (args->hdr.dbc_id >= qdev->num_dbc) { |
| ret = -EINVAL; |
| goto unlock_dev_srcu; |
| } |
| |
| user_data = u64_to_user_ptr(args->data); |
| |
| slice_ent = kzalloc(arg_size, GFP_KERNEL); |
| if (!slice_ent) { |
| ret = -EINVAL; |
| goto unlock_dev_srcu; |
| } |
| |
| ret = copy_from_user(slice_ent, user_data, arg_size); |
| if (ret) { |
| ret = -EFAULT; |
| goto free_slice_ent; |
| } |
| |
| obj = drm_gem_object_lookup(file_priv, args->hdr.handle); |
| if (!obj) { |
| ret = -ENOENT; |
| goto free_slice_ent; |
| } |
| |
| ret = qaic_validate_req(qdev, slice_ent, args->hdr.count, obj->size); |
| if (ret) |
| goto put_bo; |
| |
| bo = to_qaic_bo(obj); |
| ret = mutex_lock_interruptible(&bo->lock); |
| if (ret) |
| goto put_bo; |
| |
| if (bo->sliced) { |
| ret = -EINVAL; |
| goto unlock_bo; |
| } |
| |
| dbc = &qdev->dbc[args->hdr.dbc_id]; |
| rcu_id = srcu_read_lock(&dbc->ch_lock); |
| if (dbc->usr != usr) { |
| ret = -EINVAL; |
| goto unlock_ch_srcu; |
| } |
| |
| ret = qaic_prepare_bo(qdev, bo, &args->hdr); |
| if (ret) |
| goto unlock_ch_srcu; |
| |
| ret = qaic_attach_slicing_bo(qdev, bo, &args->hdr, slice_ent); |
| if (ret) |
| goto unprepare_bo; |
| |
| if (args->hdr.dir == DMA_TO_DEVICE) |
| dma_sync_sgtable_for_cpu(&qdev->pdev->dev, bo->sgt, args->hdr.dir); |
| |
| bo->sliced = true; |
| list_add_tail(&bo->bo_list, &bo->dbc->bo_lists); |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| mutex_unlock(&bo->lock); |
| kfree(slice_ent); |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); |
| |
| return 0; |
| |
| unprepare_bo: |
| qaic_unprepare_bo(qdev, bo); |
| unlock_ch_srcu: |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| unlock_bo: |
| mutex_unlock(&bo->lock); |
| put_bo: |
| drm_gem_object_put(obj); |
| free_slice_ent: |
| kfree(slice_ent); |
| unlock_dev_srcu: |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); |
| unlock_usr_srcu: |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); |
| return ret; |
| } |
| |
| static inline u32 fifo_space_avail(u32 head, u32 tail, u32 q_size) |
| { |
| u32 avail = head - tail - 1; |
| |
| if (head <= tail) |
| avail += q_size; |
| |
| return avail; |
| } |
| |
| static inline int copy_exec_reqs(struct qaic_device *qdev, struct bo_slice *slice, u32 dbc_id, |
| u32 head, u32 *ptail) |
| { |
| struct dma_bridge_chan *dbc = &qdev->dbc[dbc_id]; |
| struct dbc_req *reqs = slice->reqs; |
| u32 tail = *ptail; |
| u32 avail; |
| |
| avail = fifo_space_avail(head, tail, dbc->nelem); |
| if (avail < slice->nents) |
| return -EAGAIN; |
| |
| if (tail + slice->nents > dbc->nelem) { |
| avail = dbc->nelem - tail; |
| avail = min_t(u32, avail, slice->nents); |
| memcpy(fifo_at(dbc->req_q_base, tail), reqs, sizeof(*reqs) * avail); |
| reqs += avail; |
| avail = slice->nents - avail; |
| if (avail) |
| memcpy(dbc->req_q_base, reqs, sizeof(*reqs) * avail); |
| } else { |
| memcpy(fifo_at(dbc->req_q_base, tail), reqs, sizeof(*reqs) * slice->nents); |
| } |
| |
| *ptail = (tail + slice->nents) % dbc->nelem; |
| |
| return 0; |
| } |
| |
| static inline int copy_partial_exec_reqs(struct qaic_device *qdev, struct bo_slice *slice, |
| u64 resize, struct dma_bridge_chan *dbc, u32 head, |
| u32 *ptail) |
| { |
| struct dbc_req *reqs = slice->reqs; |
| struct dbc_req *last_req; |
| u32 tail = *ptail; |
| u64 last_bytes; |
| u32 first_n; |
| u32 avail; |
| |
| avail = fifo_space_avail(head, tail, dbc->nelem); |
| |
| /* |
| * After this for loop is complete, first_n represents the index |
| * of the last DMA request of this slice that needs to be |
| * transferred after resizing and last_bytes represents DMA size |
| * of that request. |
| */ |
| last_bytes = resize; |
| for (first_n = 0; first_n < slice->nents; first_n++) |
| if (last_bytes > le32_to_cpu(reqs[first_n].len)) |
| last_bytes -= le32_to_cpu(reqs[first_n].len); |
| else |
| break; |
| |
| if (avail < (first_n + 1)) |
| return -EAGAIN; |
| |
| if (first_n) { |
| if (tail + first_n > dbc->nelem) { |
| avail = dbc->nelem - tail; |
| avail = min_t(u32, avail, first_n); |
| memcpy(fifo_at(dbc->req_q_base, tail), reqs, sizeof(*reqs) * avail); |
| last_req = reqs + avail; |
| avail = first_n - avail; |
| if (avail) |
| memcpy(dbc->req_q_base, last_req, sizeof(*reqs) * avail); |
| } else { |
| memcpy(fifo_at(dbc->req_q_base, tail), reqs, sizeof(*reqs) * first_n); |
| } |
| } |
| |
| /* |
| * Copy over the last entry. Here we need to adjust len to the left over |
| * size, and set src and dst to the entry it is copied to. |
| */ |
| last_req = fifo_at(dbc->req_q_base, (tail + first_n) % dbc->nelem); |
| memcpy(last_req, reqs + slice->nents - 1, sizeof(*reqs)); |
| |
| /* |
| * last_bytes holds size of a DMA segment, maximum DMA segment size is |
| * set to UINT_MAX by qaic and hence last_bytes can never exceed u32 |
| * range. So, by down sizing we are not corrupting the value. |
| */ |
| last_req->len = cpu_to_le32((u32)last_bytes); |
| last_req->src_addr = reqs[first_n].src_addr; |
| last_req->dest_addr = reqs[first_n].dest_addr; |
| if (!last_bytes) |
| /* Disable DMA transfer */ |
| last_req->cmd = GENMASK(7, 2) & reqs[first_n].cmd; |
| |
| *ptail = (tail + first_n + 1) % dbc->nelem; |
| |
| return 0; |
| } |
| |
| static int send_bo_list_to_device(struct qaic_device *qdev, struct drm_file *file_priv, |
| struct qaic_execute_entry *exec, unsigned int count, |
| bool is_partial, struct dma_bridge_chan *dbc, u32 head, |
| u32 *tail) |
| { |
| struct qaic_partial_execute_entry *pexec = (struct qaic_partial_execute_entry *)exec; |
| struct drm_gem_object *obj; |
| struct bo_slice *slice; |
| unsigned long flags; |
| struct qaic_bo *bo; |
| int i, j; |
| int ret; |
| |
| for (i = 0; i < count; i++) { |
| /* |
| * ref count will be decremented when the transfer of this |
| * buffer is complete. It is inside dbc_irq_threaded_fn(). |
| */ |
| obj = drm_gem_object_lookup(file_priv, |
| is_partial ? pexec[i].handle : exec[i].handle); |
| if (!obj) { |
| ret = -ENOENT; |
| goto failed_to_send_bo; |
| } |
| |
| bo = to_qaic_bo(obj); |
| ret = mutex_lock_interruptible(&bo->lock); |
| if (ret) |
| goto failed_to_send_bo; |
| |
| if (!bo->sliced) { |
| ret = -EINVAL; |
| goto unlock_bo; |
| } |
| |
| if (is_partial && pexec[i].resize > bo->base.size) { |
| ret = -EINVAL; |
| goto unlock_bo; |
| } |
| |
| spin_lock_irqsave(&dbc->xfer_lock, flags); |
| if (bo_queued(bo)) { |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); |
| ret = -EINVAL; |
| goto unlock_bo; |
| } |
| |
| bo->req_id = dbc->next_req_id++; |
| |
| list_for_each_entry(slice, &bo->slices, slice) { |
| for (j = 0; j < slice->nents; j++) |
| slice->reqs[j].req_id = cpu_to_le16(bo->req_id); |
| |
| if (is_partial && (!pexec[i].resize || pexec[i].resize <= slice->offset)) |
| /* Configure the slice for no DMA transfer */ |
| ret = copy_partial_exec_reqs(qdev, slice, 0, dbc, head, tail); |
| else if (is_partial && pexec[i].resize < slice->offset + slice->size) |
| /* Configure the slice to be partially DMA transferred */ |
| ret = copy_partial_exec_reqs(qdev, slice, |
| pexec[i].resize - slice->offset, dbc, |
| head, tail); |
| else |
| ret = copy_exec_reqs(qdev, slice, dbc->id, head, tail); |
| if (ret) { |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); |
| goto unlock_bo; |
| } |
| } |
| reinit_completion(&bo->xfer_done); |
| list_add_tail(&bo->xfer_list, &dbc->xfer_list); |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); |
| dma_sync_sgtable_for_device(&qdev->pdev->dev, bo->sgt, bo->dir); |
| mutex_unlock(&bo->lock); |
| } |
| |
| return 0; |
| |
| unlock_bo: |
| mutex_unlock(&bo->lock); |
| failed_to_send_bo: |
| if (likely(obj)) |
| drm_gem_object_put(obj); |
| for (j = 0; j < i; j++) { |
| spin_lock_irqsave(&dbc->xfer_lock, flags); |
| bo = list_last_entry(&dbc->xfer_list, struct qaic_bo, xfer_list); |
| obj = &bo->base; |
| list_del_init(&bo->xfer_list); |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); |
| dma_sync_sgtable_for_cpu(&qdev->pdev->dev, bo->sgt, bo->dir); |
| drm_gem_object_put(obj); |
| } |
| return ret; |
| } |
| |
| static void update_profiling_data(struct drm_file *file_priv, |
| struct qaic_execute_entry *exec, unsigned int count, |
| bool is_partial, u64 received_ts, u64 submit_ts, u32 queue_level) |
| { |
| struct qaic_partial_execute_entry *pexec = (struct qaic_partial_execute_entry *)exec; |
| struct drm_gem_object *obj; |
| struct qaic_bo *bo; |
| int i; |
| |
| for (i = 0; i < count; i++) { |
| /* |
| * Since we already committed the BO to hardware, the only way |
| * this should fail is a pending signal. We can't cancel the |
| * submit to hardware, so we have to just skip the profiling |
| * data. In case the signal is not fatal to the process, we |
| * return success so that the user doesn't try to resubmit. |
| */ |
| obj = drm_gem_object_lookup(file_priv, |
| is_partial ? pexec[i].handle : exec[i].handle); |
| if (!obj) |
| break; |
| bo = to_qaic_bo(obj); |
| bo->perf_stats.req_received_ts = received_ts; |
| bo->perf_stats.req_submit_ts = submit_ts; |
| bo->perf_stats.queue_level_before = queue_level; |
| queue_level += bo->total_slice_nents; |
| drm_gem_object_put(obj); |
| } |
| } |
| |
| static int __qaic_execute_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv, |
| bool is_partial) |
| { |
| struct qaic_execute *args = data; |
| struct qaic_execute_entry *exec; |
| struct dma_bridge_chan *dbc; |
| int usr_rcu_id, qdev_rcu_id; |
| struct qaic_device *qdev; |
| struct qaic_user *usr; |
| u8 __user *user_data; |
| unsigned long n; |
| u64 received_ts; |
| u32 queue_level; |
| u64 submit_ts; |
| int rcu_id; |
| u32 head; |
| u32 tail; |
| u64 size; |
| int ret; |
| |
| received_ts = ktime_get_ns(); |
| |
| size = is_partial ? sizeof(struct qaic_partial_execute_entry) : sizeof(*exec); |
| n = (unsigned long)size * args->hdr.count; |
| if (args->hdr.count == 0 || n / args->hdr.count != size) |
| return -EINVAL; |
| |
| user_data = u64_to_user_ptr(args->data); |
| |
| exec = kcalloc(args->hdr.count, size, GFP_KERNEL); |
| if (!exec) |
| return -ENOMEM; |
| |
| if (copy_from_user(exec, user_data, n)) { |
| ret = -EFAULT; |
| goto free_exec; |
| } |
| |
| usr = file_priv->driver_priv; |
| usr_rcu_id = srcu_read_lock(&usr->qddev_lock); |
| if (!usr->qddev) { |
| ret = -ENODEV; |
| goto unlock_usr_srcu; |
| } |
| |
| qdev = usr->qddev->qdev; |
| qdev_rcu_id = srcu_read_lock(&qdev->dev_lock); |
| if (qdev->dev_state != QAIC_ONLINE) { |
| ret = -ENODEV; |
| goto unlock_dev_srcu; |
| } |
| |
| if (args->hdr.dbc_id >= qdev->num_dbc) { |
| ret = -EINVAL; |
| goto unlock_dev_srcu; |
| } |
| |
| dbc = &qdev->dbc[args->hdr.dbc_id]; |
| |
| rcu_id = srcu_read_lock(&dbc->ch_lock); |
| if (!dbc->usr || dbc->usr->handle != usr->handle) { |
| ret = -EPERM; |
| goto release_ch_rcu; |
| } |
| |
| head = readl(dbc->dbc_base + REQHP_OFF); |
| tail = readl(dbc->dbc_base + REQTP_OFF); |
| |
| if (head == U32_MAX || tail == U32_MAX) { |
| /* PCI link error */ |
| ret = -ENODEV; |
| goto release_ch_rcu; |
| } |
| |
| queue_level = head <= tail ? tail - head : dbc->nelem - (head - tail); |
| |
| ret = send_bo_list_to_device(qdev, file_priv, exec, args->hdr.count, is_partial, dbc, |
| head, &tail); |
| if (ret) |
| goto release_ch_rcu; |
| |
| /* Finalize commit to hardware */ |
| submit_ts = ktime_get_ns(); |
| writel(tail, dbc->dbc_base + REQTP_OFF); |
| |
| update_profiling_data(file_priv, exec, args->hdr.count, is_partial, received_ts, |
| submit_ts, queue_level); |
| |
| if (datapath_polling) |
| schedule_work(&dbc->poll_work); |
| |
| release_ch_rcu: |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| unlock_dev_srcu: |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); |
| unlock_usr_srcu: |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); |
| free_exec: |
| kfree(exec); |
| return ret; |
| } |
| |
| int qaic_execute_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) |
| { |
| return __qaic_execute_bo_ioctl(dev, data, file_priv, false); |
| } |
| |
| int qaic_partial_execute_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) |
| { |
| return __qaic_execute_bo_ioctl(dev, data, file_priv, true); |
| } |
| |
| /* |
| * Our interrupt handling is a bit more complicated than a simple ideal, but |
| * sadly necessary. |
| * |
| * Each dbc has a completion queue. Entries in the queue correspond to DMA |
| * requests which the device has processed. The hardware already has a built |
| * in irq mitigation. When the device puts an entry into the queue, it will |
| * only trigger an interrupt if the queue was empty. Therefore, when adding |
| * the Nth event to a non-empty queue, the hardware doesn't trigger an |
| * interrupt. This means the host doesn't get additional interrupts signaling |
| * the same thing - the queue has something to process. |
| * This behavior can be overridden in the DMA request. |
| * This means that when the host receives an interrupt, it is required to |
| * drain the queue. |
| * |
| * This behavior is what NAPI attempts to accomplish, although we can't use |
| * NAPI as we don't have a netdev. We use threaded irqs instead. |
| * |
| * However, there is a situation where the host drains the queue fast enough |
| * that every event causes an interrupt. Typically this is not a problem as |
| * the rate of events would be low. However, that is not the case with |
| * lprnet for example. On an Intel Xeon D-2191 where we run 8 instances of |
| * lprnet, the host receives roughly 80k interrupts per second from the device |
| * (per /proc/interrupts). While NAPI documentation indicates the host should |
| * just chug along, sadly that behavior causes instability in some hosts. |
| * |
| * Therefore, we implement an interrupt disable scheme similar to NAPI. The |
| * key difference is that we will delay after draining the queue for a small |
| * time to allow additional events to come in via polling. Using the above |
| * lprnet workload, this reduces the number of interrupts processed from |
| * ~80k/sec to about 64 in 5 minutes and appears to solve the system |
| * instability. |
| */ |
| irqreturn_t dbc_irq_handler(int irq, void *data) |
| { |
| struct dma_bridge_chan *dbc = data; |
| int rcu_id; |
| u32 head; |
| u32 tail; |
| |
| rcu_id = srcu_read_lock(&dbc->ch_lock); |
| |
| if (datapath_polling) { |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| /* |
| * Normally datapath_polling will not have irqs enabled, but |
| * when running with only one MSI the interrupt is shared with |
| * MHI so it cannot be disabled. Return ASAP instead. |
| */ |
| return IRQ_HANDLED; |
| } |
| |
| if (!dbc->usr) { |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| return IRQ_HANDLED; |
| } |
| |
| head = readl(dbc->dbc_base + RSPHP_OFF); |
| if (head == U32_MAX) { /* PCI link error */ |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| return IRQ_NONE; |
| } |
| |
| tail = readl(dbc->dbc_base + RSPTP_OFF); |
| if (tail == U32_MAX) { /* PCI link error */ |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| return IRQ_NONE; |
| } |
| |
| if (head == tail) { /* queue empty */ |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| return IRQ_NONE; |
| } |
| |
| if (!dbc->qdev->single_msi) |
| disable_irq_nosync(irq); |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| return IRQ_WAKE_THREAD; |
| } |
| |
| void irq_polling_work(struct work_struct *work) |
| { |
| struct dma_bridge_chan *dbc = container_of(work, struct dma_bridge_chan, poll_work); |
| unsigned long flags; |
| int rcu_id; |
| u32 head; |
| u32 tail; |
| |
| rcu_id = srcu_read_lock(&dbc->ch_lock); |
| |
| while (1) { |
| if (dbc->qdev->dev_state != QAIC_ONLINE) { |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| return; |
| } |
| if (!dbc->usr) { |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| return; |
| } |
| spin_lock_irqsave(&dbc->xfer_lock, flags); |
| if (list_empty(&dbc->xfer_list)) { |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| return; |
| } |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); |
| |
| head = readl(dbc->dbc_base + RSPHP_OFF); |
| if (head == U32_MAX) { /* PCI link error */ |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| return; |
| } |
| |
| tail = readl(dbc->dbc_base + RSPTP_OFF); |
| if (tail == U32_MAX) { /* PCI link error */ |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| return; |
| } |
| |
| if (head != tail) { |
| irq_wake_thread(dbc->irq, dbc); |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| return; |
| } |
| |
| cond_resched(); |
| usleep_range(datapath_poll_interval_us, 2 * datapath_poll_interval_us); |
| } |
| } |
| |
| irqreturn_t dbc_irq_threaded_fn(int irq, void *data) |
| { |
| struct dma_bridge_chan *dbc = data; |
| int event_count = NUM_EVENTS; |
| int delay_count = NUM_DELAYS; |
| struct qaic_device *qdev; |
| struct qaic_bo *bo, *i; |
| struct dbc_rsp *rsp; |
| unsigned long flags; |
| int rcu_id; |
| u16 status; |
| u16 req_id; |
| u32 head; |
| u32 tail; |
| |
| rcu_id = srcu_read_lock(&dbc->ch_lock); |
| qdev = dbc->qdev; |
| |
| head = readl(dbc->dbc_base + RSPHP_OFF); |
| if (head == U32_MAX) /* PCI link error */ |
| goto error_out; |
| |
| read_fifo: |
| |
| if (!event_count) { |
| event_count = NUM_EVENTS; |
| cond_resched(); |
| } |
| |
| /* |
| * if this channel isn't assigned or gets unassigned during processing |
| * we have nothing further to do |
| */ |
| if (!dbc->usr) |
| goto error_out; |
| |
| tail = readl(dbc->dbc_base + RSPTP_OFF); |
| if (tail == U32_MAX) /* PCI link error */ |
| goto error_out; |
| |
| if (head == tail) { /* queue empty */ |
| if (delay_count) { |
| --delay_count; |
| usleep_range(100, 200); |
| goto read_fifo; /* check for a new event */ |
| } |
| goto normal_out; |
| } |
| |
| delay_count = NUM_DELAYS; |
| while (head != tail) { |
| if (!event_count) |
| break; |
| --event_count; |
| rsp = dbc->rsp_q_base + head * sizeof(*rsp); |
| req_id = le16_to_cpu(rsp->req_id); |
| status = le16_to_cpu(rsp->status); |
| if (status) |
| pci_dbg(qdev->pdev, "req_id %d failed with status %d\n", req_id, status); |
| spin_lock_irqsave(&dbc->xfer_lock, flags); |
| /* |
| * A BO can receive multiple interrupts, since a BO can be |
| * divided into multiple slices and a buffer receives as many |
| * interrupts as slices. So until it receives interrupts for |
| * all the slices we cannot mark that buffer complete. |
| */ |
| list_for_each_entry_safe(bo, i, &dbc->xfer_list, xfer_list) { |
| if (bo->req_id == req_id) |
| bo->nr_slice_xfer_done++; |
| else |
| continue; |
| |
| if (bo->nr_slice_xfer_done < bo->nr_slice) |
| break; |
| |
| /* |
| * At this point we have received all the interrupts for |
| * BO, which means BO execution is complete. |
| */ |
| dma_sync_sgtable_for_cpu(&qdev->pdev->dev, bo->sgt, bo->dir); |
| bo->nr_slice_xfer_done = 0; |
| list_del_init(&bo->xfer_list); |
| bo->perf_stats.req_processed_ts = ktime_get_ns(); |
| complete_all(&bo->xfer_done); |
| drm_gem_object_put(&bo->base); |
| break; |
| } |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); |
| head = (head + 1) % dbc->nelem; |
| } |
| |
| /* |
| * Update the head pointer of response queue and let the device know |
| * that we have consumed elements from the queue. |
| */ |
| writel(head, dbc->dbc_base + RSPHP_OFF); |
| |
| /* elements might have been put in the queue while we were processing */ |
| goto read_fifo; |
| |
| normal_out: |
| if (!qdev->single_msi && likely(!datapath_polling)) |
| enable_irq(irq); |
| else if (unlikely(datapath_polling)) |
| schedule_work(&dbc->poll_work); |
| /* checking the fifo and enabling irqs is a race, missed event check */ |
| tail = readl(dbc->dbc_base + RSPTP_OFF); |
| if (tail != U32_MAX && head != tail) { |
| if (!qdev->single_msi && likely(!datapath_polling)) |
| disable_irq_nosync(irq); |
| goto read_fifo; |
| } |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| return IRQ_HANDLED; |
| |
| error_out: |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| if (!qdev->single_msi && likely(!datapath_polling)) |
| enable_irq(irq); |
| else if (unlikely(datapath_polling)) |
| schedule_work(&dbc->poll_work); |
| |
| return IRQ_HANDLED; |
| } |
| |
| int qaic_wait_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) |
| { |
| struct qaic_wait *args = data; |
| int usr_rcu_id, qdev_rcu_id; |
| struct dma_bridge_chan *dbc; |
| struct drm_gem_object *obj; |
| struct qaic_device *qdev; |
| unsigned long timeout; |
| struct qaic_user *usr; |
| struct qaic_bo *bo; |
| int rcu_id; |
| int ret; |
| |
| if (args->pad != 0) |
| return -EINVAL; |
| |
| usr = file_priv->driver_priv; |
| usr_rcu_id = srcu_read_lock(&usr->qddev_lock); |
| if (!usr->qddev) { |
| ret = -ENODEV; |
| goto unlock_usr_srcu; |
| } |
| |
| qdev = usr->qddev->qdev; |
| qdev_rcu_id = srcu_read_lock(&qdev->dev_lock); |
| if (qdev->dev_state != QAIC_ONLINE) { |
| ret = -ENODEV; |
| goto unlock_dev_srcu; |
| } |
| |
| if (args->dbc_id >= qdev->num_dbc) { |
| ret = -EINVAL; |
| goto unlock_dev_srcu; |
| } |
| |
| dbc = &qdev->dbc[args->dbc_id]; |
| |
| rcu_id = srcu_read_lock(&dbc->ch_lock); |
| if (dbc->usr != usr) { |
| ret = -EPERM; |
| goto unlock_ch_srcu; |
| } |
| |
| obj = drm_gem_object_lookup(file_priv, args->handle); |
| if (!obj) { |
| ret = -ENOENT; |
| goto unlock_ch_srcu; |
| } |
| |
| bo = to_qaic_bo(obj); |
| timeout = args->timeout ? args->timeout : wait_exec_default_timeout_ms; |
| timeout = msecs_to_jiffies(timeout); |
| ret = wait_for_completion_interruptible_timeout(&bo->xfer_done, timeout); |
| if (!ret) { |
| ret = -ETIMEDOUT; |
| goto put_obj; |
| } |
| if (ret > 0) |
| ret = 0; |
| |
| if (!dbc->usr) |
| ret = -EPERM; |
| |
| put_obj: |
| drm_gem_object_put(obj); |
| unlock_ch_srcu: |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| unlock_dev_srcu: |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); |
| unlock_usr_srcu: |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); |
| return ret; |
| } |
| |
| int qaic_perf_stats_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) |
| { |
| struct qaic_perf_stats_entry *ent = NULL; |
| struct qaic_perf_stats *args = data; |
| int usr_rcu_id, qdev_rcu_id; |
| struct drm_gem_object *obj; |
| struct qaic_device *qdev; |
| struct qaic_user *usr; |
| struct qaic_bo *bo; |
| int ret, i; |
| |
| usr = file_priv->driver_priv; |
| usr_rcu_id = srcu_read_lock(&usr->qddev_lock); |
| if (!usr->qddev) { |
| ret = -ENODEV; |
| goto unlock_usr_srcu; |
| } |
| |
| qdev = usr->qddev->qdev; |
| qdev_rcu_id = srcu_read_lock(&qdev->dev_lock); |
| if (qdev->dev_state != QAIC_ONLINE) { |
| ret = -ENODEV; |
| goto unlock_dev_srcu; |
| } |
| |
| if (args->hdr.dbc_id >= qdev->num_dbc) { |
| ret = -EINVAL; |
| goto unlock_dev_srcu; |
| } |
| |
| ent = kcalloc(args->hdr.count, sizeof(*ent), GFP_KERNEL); |
| if (!ent) { |
| ret = -EINVAL; |
| goto unlock_dev_srcu; |
| } |
| |
| ret = copy_from_user(ent, u64_to_user_ptr(args->data), args->hdr.count * sizeof(*ent)); |
| if (ret) { |
| ret = -EFAULT; |
| goto free_ent; |
| } |
| |
| for (i = 0; i < args->hdr.count; i++) { |
| obj = drm_gem_object_lookup(file_priv, ent[i].handle); |
| if (!obj) { |
| ret = -ENOENT; |
| goto free_ent; |
| } |
| bo = to_qaic_bo(obj); |
| /* |
| * perf stats ioctl is called before wait ioctl is complete then |
| * the latency information is invalid. |
| */ |
| if (bo->perf_stats.req_processed_ts < bo->perf_stats.req_submit_ts) { |
| ent[i].device_latency_us = 0; |
| } else { |
| ent[i].device_latency_us = div_u64((bo->perf_stats.req_processed_ts - |
| bo->perf_stats.req_submit_ts), 1000); |
| } |
| ent[i].submit_latency_us = div_u64((bo->perf_stats.req_submit_ts - |
| bo->perf_stats.req_received_ts), 1000); |
| ent[i].queue_level_before = bo->perf_stats.queue_level_before; |
| ent[i].num_queue_element = bo->total_slice_nents; |
| drm_gem_object_put(obj); |
| } |
| |
| if (copy_to_user(u64_to_user_ptr(args->data), ent, args->hdr.count * sizeof(*ent))) |
| ret = -EFAULT; |
| |
| free_ent: |
| kfree(ent); |
| unlock_dev_srcu: |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); |
| unlock_usr_srcu: |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); |
| return ret; |
| } |
| |
| static void detach_slice_bo(struct qaic_device *qdev, struct qaic_bo *bo) |
| { |
| qaic_free_slices_bo(bo); |
| qaic_unprepare_bo(qdev, bo); |
| qaic_init_bo(bo, true); |
| list_del(&bo->bo_list); |
| drm_gem_object_put(&bo->base); |
| } |
| |
| int qaic_detach_slice_bo_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) |
| { |
| struct qaic_detach_slice *args = data; |
| int rcu_id, usr_rcu_id, qdev_rcu_id; |
| struct dma_bridge_chan *dbc; |
| struct drm_gem_object *obj; |
| struct qaic_device *qdev; |
| struct qaic_user *usr; |
| unsigned long flags; |
| struct qaic_bo *bo; |
| int ret; |
| |
| if (args->pad != 0) |
| return -EINVAL; |
| |
| usr = file_priv->driver_priv; |
| usr_rcu_id = srcu_read_lock(&usr->qddev_lock); |
| if (!usr->qddev) { |
| ret = -ENODEV; |
| goto unlock_usr_srcu; |
| } |
| |
| qdev = usr->qddev->qdev; |
| qdev_rcu_id = srcu_read_lock(&qdev->dev_lock); |
| if (qdev->dev_state != QAIC_ONLINE) { |
| ret = -ENODEV; |
| goto unlock_dev_srcu; |
| } |
| |
| obj = drm_gem_object_lookup(file_priv, args->handle); |
| if (!obj) { |
| ret = -ENOENT; |
| goto unlock_dev_srcu; |
| } |
| |
| bo = to_qaic_bo(obj); |
| ret = mutex_lock_interruptible(&bo->lock); |
| if (ret) |
| goto put_bo; |
| |
| if (!bo->sliced) { |
| ret = -EINVAL; |
| goto unlock_bo; |
| } |
| |
| dbc = bo->dbc; |
| rcu_id = srcu_read_lock(&dbc->ch_lock); |
| if (dbc->usr != usr) { |
| ret = -EINVAL; |
| goto unlock_ch_srcu; |
| } |
| |
| /* Check if BO is committed to H/W for DMA */ |
| spin_lock_irqsave(&dbc->xfer_lock, flags); |
| if (bo_queued(bo)) { |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); |
| ret = -EBUSY; |
| goto unlock_ch_srcu; |
| } |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); |
| |
| detach_slice_bo(qdev, bo); |
| |
| unlock_ch_srcu: |
| srcu_read_unlock(&dbc->ch_lock, rcu_id); |
| unlock_bo: |
| mutex_unlock(&bo->lock); |
| put_bo: |
| drm_gem_object_put(obj); |
| unlock_dev_srcu: |
| srcu_read_unlock(&qdev->dev_lock, qdev_rcu_id); |
| unlock_usr_srcu: |
| srcu_read_unlock(&usr->qddev_lock, usr_rcu_id); |
| return ret; |
| } |
| |
| static void empty_xfer_list(struct qaic_device *qdev, struct dma_bridge_chan *dbc) |
| { |
| unsigned long flags; |
| struct qaic_bo *bo; |
| |
| spin_lock_irqsave(&dbc->xfer_lock, flags); |
| while (!list_empty(&dbc->xfer_list)) { |
| bo = list_first_entry(&dbc->xfer_list, typeof(*bo), xfer_list); |
| list_del_init(&bo->xfer_list); |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); |
| bo->nr_slice_xfer_done = 0; |
| bo->req_id = 0; |
| bo->perf_stats.req_received_ts = 0; |
| bo->perf_stats.req_submit_ts = 0; |
| bo->perf_stats.req_processed_ts = 0; |
| bo->perf_stats.queue_level_before = 0; |
| dma_sync_sgtable_for_cpu(&qdev->pdev->dev, bo->sgt, bo->dir); |
| complete_all(&bo->xfer_done); |
| drm_gem_object_put(&bo->base); |
| spin_lock_irqsave(&dbc->xfer_lock, flags); |
| } |
| spin_unlock_irqrestore(&dbc->xfer_lock, flags); |
| } |
| |
| int disable_dbc(struct qaic_device *qdev, u32 dbc_id, struct qaic_user *usr) |
| { |
| if (!qdev->dbc[dbc_id].usr || qdev->dbc[dbc_id].usr->handle != usr->handle) |
| return -EPERM; |
| |
| qdev->dbc[dbc_id].usr = NULL; |
| synchronize_srcu(&qdev->dbc[dbc_id].ch_lock); |
| return 0; |
| } |
| |
| /** |
| * enable_dbc - Enable the DBC. DBCs are disabled by removing the context of |
| * user. Add user context back to DBC to enable it. This function trusts the |
| * DBC ID passed and expects the DBC to be disabled. |
| * @qdev: Qranium device handle |
| * @dbc_id: ID of the DBC |
| * @usr: User context |
| */ |
| void enable_dbc(struct qaic_device *qdev, u32 dbc_id, struct qaic_user *usr) |
| { |
| qdev->dbc[dbc_id].usr = usr; |
| } |
| |
| void wakeup_dbc(struct qaic_device *qdev, u32 dbc_id) |
| { |
| struct dma_bridge_chan *dbc = &qdev->dbc[dbc_id]; |
| |
| dbc->usr = NULL; |
| empty_xfer_list(qdev, dbc); |
| synchronize_srcu(&dbc->ch_lock); |
| /* |
| * Threads holding channel lock, may add more elements in the xfer_list. |
| * Flush out these elements from xfer_list. |
| */ |
| empty_xfer_list(qdev, dbc); |
| } |
| |
| void release_dbc(struct qaic_device *qdev, u32 dbc_id) |
| { |
| struct qaic_bo *bo, *bo_temp; |
| struct dma_bridge_chan *dbc; |
| |
| dbc = &qdev->dbc[dbc_id]; |
| if (!dbc->in_use) |
| return; |
| |
| wakeup_dbc(qdev, dbc_id); |
| |
| dma_free_coherent(&qdev->pdev->dev, dbc->total_size, dbc->req_q_base, dbc->dma_addr); |
| dbc->total_size = 0; |
| dbc->req_q_base = NULL; |
| dbc->dma_addr = 0; |
| dbc->nelem = 0; |
| dbc->usr = NULL; |
| |
| list_for_each_entry_safe(bo, bo_temp, &dbc->bo_lists, bo_list) { |
| drm_gem_object_get(&bo->base); |
| mutex_lock(&bo->lock); |
| detach_slice_bo(qdev, bo); |
| mutex_unlock(&bo->lock); |
| drm_gem_object_put(&bo->base); |
| } |
| |
| dbc->in_use = false; |
| wake_up(&dbc->dbc_release); |
| } |
| |
| void qaic_data_get_fifo_info(struct dma_bridge_chan *dbc, u32 *head, u32 *tail) |
| { |
| if (!dbc || !head || !tail) |
| return; |
| |
| *head = readl(dbc->dbc_base + REQHP_OFF); |
| *tail = readl(dbc->dbc_base + REQTP_OFF); |
| } |