| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Platform driver for the Synopsys DesignWare DMA Controller |
| * |
| * Copyright (C) 2007-2008 Atmel Corporation |
| * Copyright (C) 2010-2011 ST Microelectronics |
| * Copyright (C) 2013 Intel Corporation |
| * |
| * Some parts of this driver are derived from the original dw_dmac. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/clk.h> |
| #include <linux/pm_runtime.h> |
| #include <linux/platform_device.h> |
| #include <linux/dmaengine.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/of.h> |
| #include <linux/acpi.h> |
| |
| #include "internal.h" |
| |
| #define DRV_NAME "dw_dmac" |
| |
| static int dw_probe(struct platform_device *pdev) |
| { |
| const struct dw_dma_chip_pdata *match; |
| struct dw_dma_chip_pdata *data; |
| struct dw_dma_chip *chip; |
| struct device *dev = &pdev->dev; |
| int ret; |
| |
| match = device_get_match_data(dev); |
| if (!match) |
| return -ENODEV; |
| |
| data = devm_kmemdup(&pdev->dev, match, sizeof(*match), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL); |
| if (!chip) |
| return -ENOMEM; |
| |
| chip->irq = platform_get_irq(pdev, 0); |
| if (chip->irq < 0) |
| return chip->irq; |
| |
| chip->regs = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(chip->regs)) |
| return PTR_ERR(chip->regs); |
| |
| ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (ret) |
| return ret; |
| |
| if (!data->pdata) |
| data->pdata = dev_get_platdata(dev); |
| if (!data->pdata) |
| data->pdata = dw_dma_parse_dt(pdev); |
| |
| chip->dev = dev; |
| chip->id = pdev->id; |
| chip->pdata = data->pdata; |
| |
| data->chip = chip; |
| |
| chip->clk = devm_clk_get_optional(chip->dev, "hclk"); |
| if (IS_ERR(chip->clk)) |
| return PTR_ERR(chip->clk); |
| ret = clk_prepare_enable(chip->clk); |
| if (ret) |
| return ret; |
| |
| pm_runtime_enable(&pdev->dev); |
| |
| ret = data->probe(chip); |
| if (ret) |
| goto err_dw_dma_probe; |
| |
| platform_set_drvdata(pdev, data); |
| |
| dw_dma_of_controller_register(chip->dw); |
| |
| dw_dma_acpi_controller_register(chip->dw); |
| |
| return 0; |
| |
| err_dw_dma_probe: |
| pm_runtime_disable(&pdev->dev); |
| clk_disable_unprepare(chip->clk); |
| return ret; |
| } |
| |
| static void dw_remove(struct platform_device *pdev) |
| { |
| struct dw_dma_chip_pdata *data = platform_get_drvdata(pdev); |
| struct dw_dma_chip *chip = data->chip; |
| int ret; |
| |
| dw_dma_acpi_controller_free(chip->dw); |
| |
| dw_dma_of_controller_free(chip->dw); |
| |
| ret = data->remove(chip); |
| if (ret) |
| dev_warn(chip->dev, "can't remove device properly: %d\n", ret); |
| |
| pm_runtime_disable(&pdev->dev); |
| clk_disable_unprepare(chip->clk); |
| } |
| |
| static void dw_shutdown(struct platform_device *pdev) |
| { |
| struct dw_dma_chip_pdata *data = platform_get_drvdata(pdev); |
| struct dw_dma_chip *chip = data->chip; |
| |
| /* |
| * We have to call do_dw_dma_disable() to stop any ongoing transfer. On |
| * some platforms we can't do that since DMA device is powered off. |
| * Moreover we have no possibility to check if the platform is affected |
| * or not. That's why we call pm_runtime_get_sync() / pm_runtime_put() |
| * unconditionally. On the other hand we can't use |
| * pm_runtime_suspended() because runtime PM framework is not fully |
| * used by the driver. |
| */ |
| pm_runtime_get_sync(chip->dev); |
| do_dw_dma_disable(chip); |
| pm_runtime_put_sync_suspend(chip->dev); |
| |
| clk_disable_unprepare(chip->clk); |
| } |
| |
| #ifdef CONFIG_OF |
| static const struct of_device_id dw_dma_of_id_table[] = { |
| { .compatible = "snps,dma-spear1340", .data = &dw_dma_chip_pdata }, |
| { .compatible = "renesas,rzn1-dma", .data = &dw_dma_chip_pdata }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(of, dw_dma_of_id_table); |
| #endif |
| |
| #ifdef CONFIG_ACPI |
| static const struct acpi_device_id dw_dma_acpi_id_table[] = { |
| { "INTL9C60", (kernel_ulong_t)&dw_dma_chip_pdata }, |
| { "80862286", (kernel_ulong_t)&dw_dma_chip_pdata }, |
| { "808622C0", (kernel_ulong_t)&dw_dma_chip_pdata }, |
| |
| /* Elkhart Lake iDMA 32-bit (PSE DMA) */ |
| { "80864BB4", (kernel_ulong_t)&xbar_chip_pdata }, |
| { "80864BB5", (kernel_ulong_t)&xbar_chip_pdata }, |
| { "80864BB6", (kernel_ulong_t)&xbar_chip_pdata }, |
| |
| { } |
| }; |
| MODULE_DEVICE_TABLE(acpi, dw_dma_acpi_id_table); |
| #endif |
| |
| #ifdef CONFIG_PM_SLEEP |
| |
| static int dw_suspend_late(struct device *dev) |
| { |
| struct dw_dma_chip_pdata *data = dev_get_drvdata(dev); |
| struct dw_dma_chip *chip = data->chip; |
| |
| do_dw_dma_disable(chip); |
| clk_disable_unprepare(chip->clk); |
| |
| return 0; |
| } |
| |
| static int dw_resume_early(struct device *dev) |
| { |
| struct dw_dma_chip_pdata *data = dev_get_drvdata(dev); |
| struct dw_dma_chip *chip = data->chip; |
| int ret; |
| |
| ret = clk_prepare_enable(chip->clk); |
| if (ret) |
| return ret; |
| |
| return do_dw_dma_enable(chip); |
| } |
| |
| #endif /* CONFIG_PM_SLEEP */ |
| |
| static const struct dev_pm_ops dw_dev_pm_ops = { |
| SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_suspend_late, dw_resume_early) |
| }; |
| |
| static struct platform_driver dw_driver = { |
| .probe = dw_probe, |
| .remove_new = dw_remove, |
| .shutdown = dw_shutdown, |
| .driver = { |
| .name = DRV_NAME, |
| .pm = &dw_dev_pm_ops, |
| .of_match_table = of_match_ptr(dw_dma_of_id_table), |
| .acpi_match_table = ACPI_PTR(dw_dma_acpi_id_table), |
| }, |
| }; |
| |
| static int __init dw_init(void) |
| { |
| return platform_driver_register(&dw_driver); |
| } |
| subsys_initcall(dw_init); |
| |
| static void __exit dw_exit(void) |
| { |
| platform_driver_unregister(&dw_driver); |
| } |
| module_exit(dw_exit); |
| |
| MODULE_LICENSE("GPL v2"); |
| MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller platform driver"); |
| MODULE_ALIAS("platform:" DRV_NAME); |