| /* |
| * Copyright 2019 Advanced Micro Devices, Inc. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sublicense, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice shall be included in |
| * all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR |
| * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, |
| * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: AMD |
| * |
| */ |
| |
| #include "dm_services.h" |
| #include "dc.h" |
| #include "dc_dmub_srv.h" |
| #include "../dmub/dmub_srv.h" |
| #include "dm_helpers.h" |
| #include "dc_hw_types.h" |
| #include "core_types.h" |
| #include "../basics/conversion.h" |
| #include "cursor_reg_cache.h" |
| #include "resource.h" |
| #include "clk_mgr.h" |
| #include "dc_state_priv.h" |
| #include "dc_plane_priv.h" |
| |
| #define CTX dc_dmub_srv->ctx |
| #define DC_LOGGER CTX->logger |
| |
| static void dc_dmub_srv_construct(struct dc_dmub_srv *dc_srv, struct dc *dc, |
| struct dmub_srv *dmub) |
| { |
| dc_srv->dmub = dmub; |
| dc_srv->ctx = dc->ctx; |
| } |
| |
| struct dc_dmub_srv *dc_dmub_srv_create(struct dc *dc, struct dmub_srv *dmub) |
| { |
| struct dc_dmub_srv *dc_srv = |
| kzalloc(sizeof(struct dc_dmub_srv), GFP_KERNEL); |
| |
| if (dc_srv == NULL) { |
| BREAK_TO_DEBUGGER(); |
| return NULL; |
| } |
| |
| dc_dmub_srv_construct(dc_srv, dc, dmub); |
| |
| return dc_srv; |
| } |
| |
| void dc_dmub_srv_destroy(struct dc_dmub_srv **dmub_srv) |
| { |
| if (*dmub_srv) { |
| kfree(*dmub_srv); |
| *dmub_srv = NULL; |
| } |
| } |
| |
| void dc_dmub_srv_wait_idle(struct dc_dmub_srv *dc_dmub_srv) |
| { |
| struct dmub_srv *dmub = dc_dmub_srv->dmub; |
| struct dc_context *dc_ctx = dc_dmub_srv->ctx; |
| enum dmub_status status; |
| |
| do { |
| status = dmub_srv_wait_for_idle(dmub, 100000); |
| } while (dc_dmub_srv->ctx->dc->debug.disable_timeout && status != DMUB_STATUS_OK); |
| |
| if (status != DMUB_STATUS_OK) { |
| DC_ERROR("Error waiting for DMUB idle: status=%d\n", status); |
| dc_dmub_srv_log_diagnostic_data(dc_dmub_srv); |
| } |
| } |
| |
| void dc_dmub_srv_clear_inbox0_ack(struct dc_dmub_srv *dc_dmub_srv) |
| { |
| struct dmub_srv *dmub = dc_dmub_srv->dmub; |
| struct dc_context *dc_ctx = dc_dmub_srv->ctx; |
| enum dmub_status status = DMUB_STATUS_OK; |
| |
| status = dmub_srv_clear_inbox0_ack(dmub); |
| if (status != DMUB_STATUS_OK) { |
| DC_ERROR("Error clearing INBOX0 ack: status=%d\n", status); |
| dc_dmub_srv_log_diagnostic_data(dc_dmub_srv); |
| } |
| } |
| |
| void dc_dmub_srv_wait_for_inbox0_ack(struct dc_dmub_srv *dc_dmub_srv) |
| { |
| struct dmub_srv *dmub = dc_dmub_srv->dmub; |
| struct dc_context *dc_ctx = dc_dmub_srv->ctx; |
| enum dmub_status status = DMUB_STATUS_OK; |
| |
| status = dmub_srv_wait_for_inbox0_ack(dmub, 100000); |
| if (status != DMUB_STATUS_OK) { |
| DC_ERROR("Error waiting for INBOX0 HW Lock Ack\n"); |
| dc_dmub_srv_log_diagnostic_data(dc_dmub_srv); |
| } |
| } |
| |
| void dc_dmub_srv_send_inbox0_cmd(struct dc_dmub_srv *dc_dmub_srv, |
| union dmub_inbox0_data_register data) |
| { |
| struct dmub_srv *dmub = dc_dmub_srv->dmub; |
| struct dc_context *dc_ctx = dc_dmub_srv->ctx; |
| enum dmub_status status = DMUB_STATUS_OK; |
| |
| status = dmub_srv_send_inbox0_cmd(dmub, data); |
| if (status != DMUB_STATUS_OK) { |
| DC_ERROR("Error sending INBOX0 cmd\n"); |
| dc_dmub_srv_log_diagnostic_data(dc_dmub_srv); |
| } |
| } |
| |
| bool dc_dmub_srv_cmd_list_queue_execute(struct dc_dmub_srv *dc_dmub_srv, |
| unsigned int count, |
| union dmub_rb_cmd *cmd_list) |
| { |
| struct dc_context *dc_ctx; |
| struct dmub_srv *dmub; |
| enum dmub_status status; |
| int i; |
| |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub) |
| return false; |
| |
| dc_ctx = dc_dmub_srv->ctx; |
| dmub = dc_dmub_srv->dmub; |
| |
| for (i = 0 ; i < count; i++) { |
| // Queue command |
| status = dmub_srv_cmd_queue(dmub, &cmd_list[i]); |
| |
| if (status == DMUB_STATUS_QUEUE_FULL) { |
| /* Execute and wait for queue to become empty again. */ |
| status = dmub_srv_cmd_execute(dmub); |
| if (status == DMUB_STATUS_POWER_STATE_D3) |
| return false; |
| |
| do { |
| status = dmub_srv_wait_for_idle(dmub, 100000); |
| } while (dc_dmub_srv->ctx->dc->debug.disable_timeout && status != DMUB_STATUS_OK); |
| |
| /* Requeue the command. */ |
| status = dmub_srv_cmd_queue(dmub, &cmd_list[i]); |
| } |
| |
| if (status != DMUB_STATUS_OK) { |
| if (status != DMUB_STATUS_POWER_STATE_D3) { |
| DC_ERROR("Error queueing DMUB command: status=%d\n", status); |
| dc_dmub_srv_log_diagnostic_data(dc_dmub_srv); |
| } |
| return false; |
| } |
| } |
| |
| status = dmub_srv_cmd_execute(dmub); |
| if (status != DMUB_STATUS_OK) { |
| if (status != DMUB_STATUS_POWER_STATE_D3) { |
| DC_ERROR("Error starting DMUB execution: status=%d\n", status); |
| dc_dmub_srv_log_diagnostic_data(dc_dmub_srv); |
| } |
| return false; |
| } |
| |
| return true; |
| } |
| |
| bool dc_dmub_srv_wait_for_idle(struct dc_dmub_srv *dc_dmub_srv, |
| enum dm_dmub_wait_type wait_type, |
| union dmub_rb_cmd *cmd_list) |
| { |
| struct dmub_srv *dmub; |
| enum dmub_status status; |
| |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub) |
| return false; |
| |
| dmub = dc_dmub_srv->dmub; |
| |
| // Wait for DMUB to process command |
| if (wait_type != DM_DMUB_WAIT_TYPE_NO_WAIT) { |
| do { |
| status = dmub_srv_wait_for_idle(dmub, 100000); |
| } while (dc_dmub_srv->ctx->dc->debug.disable_timeout && status != DMUB_STATUS_OK); |
| |
| if (status != DMUB_STATUS_OK) { |
| DC_LOG_DEBUG("No reply for DMUB command: status=%d\n", status); |
| if (!dmub->debug.timeout_occured) { |
| dmub->debug.timeout_occured = true; |
| dmub->debug.timeout_cmd = *cmd_list; |
| dmub->debug.timestamp = dm_get_timestamp(dc_dmub_srv->ctx); |
| } |
| dc_dmub_srv_log_diagnostic_data(dc_dmub_srv); |
| return false; |
| } |
| |
| // Copy data back from ring buffer into command |
| if (wait_type == DM_DMUB_WAIT_TYPE_WAIT_WITH_REPLY) |
| dmub_rb_get_return_data(&dmub->inbox1_rb, cmd_list); |
| } |
| |
| return true; |
| } |
| |
| bool dc_dmub_srv_cmd_run(struct dc_dmub_srv *dc_dmub_srv, union dmub_rb_cmd *cmd, enum dm_dmub_wait_type wait_type) |
| { |
| return dc_dmub_srv_cmd_run_list(dc_dmub_srv, 1, cmd, wait_type); |
| } |
| |
| bool dc_dmub_srv_cmd_run_list(struct dc_dmub_srv *dc_dmub_srv, unsigned int count, union dmub_rb_cmd *cmd_list, enum dm_dmub_wait_type wait_type) |
| { |
| struct dc_context *dc_ctx; |
| struct dmub_srv *dmub; |
| enum dmub_status status; |
| int i; |
| |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub) |
| return false; |
| |
| dc_ctx = dc_dmub_srv->ctx; |
| dmub = dc_dmub_srv->dmub; |
| |
| for (i = 0 ; i < count; i++) { |
| // Queue command |
| status = dmub_srv_cmd_queue(dmub, &cmd_list[i]); |
| |
| if (status == DMUB_STATUS_QUEUE_FULL) { |
| /* Execute and wait for queue to become empty again. */ |
| status = dmub_srv_cmd_execute(dmub); |
| if (status == DMUB_STATUS_POWER_STATE_D3) |
| return false; |
| |
| status = dmub_srv_wait_for_idle(dmub, 100000); |
| if (status != DMUB_STATUS_OK) |
| return false; |
| |
| /* Requeue the command. */ |
| status = dmub_srv_cmd_queue(dmub, &cmd_list[i]); |
| } |
| |
| if (status != DMUB_STATUS_OK) { |
| if (status != DMUB_STATUS_POWER_STATE_D3) { |
| DC_ERROR("Error queueing DMUB command: status=%d\n", status); |
| dc_dmub_srv_log_diagnostic_data(dc_dmub_srv); |
| } |
| return false; |
| } |
| } |
| |
| status = dmub_srv_cmd_execute(dmub); |
| if (status != DMUB_STATUS_OK) { |
| if (status != DMUB_STATUS_POWER_STATE_D3) { |
| DC_ERROR("Error starting DMUB execution: status=%d\n", status); |
| dc_dmub_srv_log_diagnostic_data(dc_dmub_srv); |
| } |
| return false; |
| } |
| |
| // Wait for DMUB to process command |
| if (wait_type != DM_DMUB_WAIT_TYPE_NO_WAIT) { |
| if (dc_dmub_srv->ctx->dc->debug.disable_timeout) { |
| do { |
| status = dmub_srv_wait_for_idle(dmub, 100000); |
| } while (status != DMUB_STATUS_OK); |
| } else |
| status = dmub_srv_wait_for_idle(dmub, 100000); |
| |
| if (status != DMUB_STATUS_OK) { |
| DC_LOG_DEBUG("No reply for DMUB command: status=%d\n", status); |
| dc_dmub_srv_log_diagnostic_data(dc_dmub_srv); |
| return false; |
| } |
| |
| // Copy data back from ring buffer into command |
| if (wait_type == DM_DMUB_WAIT_TYPE_WAIT_WITH_REPLY) |
| dmub_rb_get_return_data(&dmub->inbox1_rb, cmd_list); |
| } |
| |
| return true; |
| } |
| |
| bool dc_dmub_srv_optimized_init_done(struct dc_dmub_srv *dc_dmub_srv) |
| { |
| struct dmub_srv *dmub; |
| struct dc_context *dc_ctx; |
| union dmub_fw_boot_status boot_status; |
| enum dmub_status status; |
| |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub) |
| return false; |
| |
| dmub = dc_dmub_srv->dmub; |
| dc_ctx = dc_dmub_srv->ctx; |
| |
| status = dmub_srv_get_fw_boot_status(dmub, &boot_status); |
| if (status != DMUB_STATUS_OK) { |
| DC_ERROR("Error querying DMUB boot status: error=%d\n", status); |
| return false; |
| } |
| |
| return boot_status.bits.optimized_init_done; |
| } |
| |
| bool dc_dmub_srv_notify_stream_mask(struct dc_dmub_srv *dc_dmub_srv, |
| unsigned int stream_mask) |
| { |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub) |
| return false; |
| |
| return dc_wake_and_execute_gpint(dc_dmub_srv->ctx, DMUB_GPINT__IDLE_OPT_NOTIFY_STREAM_MASK, |
| stream_mask, NULL, DM_DMUB_WAIT_TYPE_WAIT); |
| } |
| |
| bool dc_dmub_srv_is_restore_required(struct dc_dmub_srv *dc_dmub_srv) |
| { |
| struct dmub_srv *dmub; |
| struct dc_context *dc_ctx; |
| union dmub_fw_boot_status boot_status; |
| enum dmub_status status; |
| |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub) |
| return false; |
| |
| dmub = dc_dmub_srv->dmub; |
| dc_ctx = dc_dmub_srv->ctx; |
| |
| status = dmub_srv_get_fw_boot_status(dmub, &boot_status); |
| if (status != DMUB_STATUS_OK) { |
| DC_ERROR("Error querying DMUB boot status: error=%d\n", status); |
| return false; |
| } |
| |
| return boot_status.bits.restore_required; |
| } |
| |
| bool dc_dmub_srv_get_dmub_outbox0_msg(const struct dc *dc, struct dmcub_trace_buf_entry *entry) |
| { |
| struct dmub_srv *dmub = dc->ctx->dmub_srv->dmub; |
| return dmub_srv_get_outbox0_msg(dmub, entry); |
| } |
| |
| void dc_dmub_trace_event_control(struct dc *dc, bool enable) |
| { |
| dm_helpers_dmub_outbox_interrupt_control(dc->ctx, enable); |
| } |
| |
| void dc_dmub_srv_drr_update_cmd(struct dc *dc, uint32_t tg_inst, uint32_t vtotal_min, uint32_t vtotal_max) |
| { |
| union dmub_rb_cmd cmd = { 0 }; |
| |
| cmd.drr_update.header.type = DMUB_CMD__FW_ASSISTED_MCLK_SWITCH; |
| cmd.drr_update.header.sub_type = DMUB_CMD__FAMS_DRR_UPDATE; |
| cmd.drr_update.dmub_optc_state_req.v_total_max = vtotal_max; |
| cmd.drr_update.dmub_optc_state_req.v_total_min = vtotal_min; |
| cmd.drr_update.dmub_optc_state_req.tg_inst = tg_inst; |
| |
| cmd.drr_update.header.payload_bytes = sizeof(cmd.drr_update) - sizeof(cmd.drr_update.header); |
| |
| // Send the command to the DMCUB. |
| dc_wake_and_execute_dmub_cmd(dc->ctx, &cmd, DM_DMUB_WAIT_TYPE_WAIT); |
| } |
| |
| void dc_dmub_srv_set_drr_manual_trigger_cmd(struct dc *dc, uint32_t tg_inst) |
| { |
| union dmub_rb_cmd cmd = { 0 }; |
| |
| cmd.drr_update.header.type = DMUB_CMD__FW_ASSISTED_MCLK_SWITCH; |
| cmd.drr_update.header.sub_type = DMUB_CMD__FAMS_SET_MANUAL_TRIGGER; |
| cmd.drr_update.dmub_optc_state_req.tg_inst = tg_inst; |
| |
| cmd.drr_update.header.payload_bytes = sizeof(cmd.drr_update) - sizeof(cmd.drr_update.header); |
| |
| // Send the command to the DMCUB. |
| dc_wake_and_execute_dmub_cmd(dc->ctx, &cmd, DM_DMUB_WAIT_TYPE_WAIT); |
| } |
| |
| static uint8_t dc_dmub_srv_get_pipes_for_stream(struct dc *dc, struct dc_stream_state *stream) |
| { |
| uint8_t pipes = 0; |
| int i = 0; |
| |
| for (i = 0; i < MAX_PIPES; i++) { |
| struct pipe_ctx *pipe = &dc->current_state->res_ctx.pipe_ctx[i]; |
| |
| if (pipe->stream == stream && pipe->stream_res.tg) |
| pipes = i; |
| } |
| return pipes; |
| } |
| |
| static void dc_dmub_srv_populate_fams_pipe_info(struct dc *dc, struct dc_state *context, |
| struct pipe_ctx *head_pipe, |
| struct dmub_cmd_fw_assisted_mclk_switch_pipe_data *fams_pipe_data) |
| { |
| int j; |
| int pipe_idx = 0; |
| |
| fams_pipe_data->pipe_index[pipe_idx++] = head_pipe->plane_res.hubp->inst; |
| for (j = 0; j < dc->res_pool->pipe_count; j++) { |
| struct pipe_ctx *split_pipe = &context->res_ctx.pipe_ctx[j]; |
| |
| if (split_pipe->stream == head_pipe->stream && (split_pipe->top_pipe || split_pipe->prev_odm_pipe)) { |
| fams_pipe_data->pipe_index[pipe_idx++] = split_pipe->plane_res.hubp->inst; |
| } |
| } |
| fams_pipe_data->pipe_count = pipe_idx; |
| } |
| |
| bool dc_dmub_srv_p_state_delegate(struct dc *dc, bool should_manage_pstate, struct dc_state *context) |
| { |
| union dmub_rb_cmd cmd = { 0 }; |
| struct dmub_cmd_fw_assisted_mclk_switch_config *config_data = &cmd.fw_assisted_mclk_switch.config_data; |
| int i = 0, k = 0; |
| int ramp_up_num_steps = 1; // TODO: Ramp is currently disabled. Reenable it. |
| uint8_t visual_confirm_enabled; |
| int pipe_idx = 0; |
| struct dc_stream_status *stream_status = NULL; |
| |
| if (dc == NULL) |
| return false; |
| |
| visual_confirm_enabled = dc->debug.visual_confirm == VISUAL_CONFIRM_FAMS; |
| |
| // Format command. |
| cmd.fw_assisted_mclk_switch.header.type = DMUB_CMD__FW_ASSISTED_MCLK_SWITCH; |
| cmd.fw_assisted_mclk_switch.header.sub_type = DMUB_CMD__FAMS_SETUP_FW_CTRL; |
| cmd.fw_assisted_mclk_switch.config_data.fams_enabled = should_manage_pstate; |
| cmd.fw_assisted_mclk_switch.config_data.visual_confirm_enabled = visual_confirm_enabled; |
| |
| if (should_manage_pstate) { |
| for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) { |
| struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; |
| |
| if (!pipe->stream) |
| continue; |
| |
| /* If FAMS is being used to support P-State and there is a stream |
| * that does not use FAMS, we are in an FPO + VActive scenario. |
| * Assign vactive stretch margin in this case. |
| */ |
| stream_status = dc_state_get_stream_status(context, pipe->stream); |
| if (stream_status && !stream_status->fpo_in_use) { |
| cmd.fw_assisted_mclk_switch.config_data.vactive_stretch_margin_us = dc->debug.fpo_vactive_margin_us; |
| break; |
| } |
| pipe_idx++; |
| } |
| } |
| |
| for (i = 0, k = 0; context && i < dc->res_pool->pipe_count; i++) { |
| struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; |
| |
| if (!resource_is_pipe_type(pipe, OTG_MASTER)) |
| continue; |
| |
| stream_status = dc_state_get_stream_status(context, pipe->stream); |
| if (stream_status && stream_status->fpo_in_use) { |
| struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; |
| uint8_t min_refresh_in_hz = (pipe->stream->timing.min_refresh_in_uhz + 999999) / 1000000; |
| |
| config_data->pipe_data[k].pix_clk_100hz = pipe->stream->timing.pix_clk_100hz; |
| config_data->pipe_data[k].min_refresh_in_hz = min_refresh_in_hz; |
| config_data->pipe_data[k].max_ramp_step = ramp_up_num_steps; |
| config_data->pipe_data[k].pipes = dc_dmub_srv_get_pipes_for_stream(dc, pipe->stream); |
| dc_dmub_srv_populate_fams_pipe_info(dc, context, pipe, &config_data->pipe_data[k]); |
| k++; |
| } |
| } |
| cmd.fw_assisted_mclk_switch.header.payload_bytes = |
| sizeof(cmd.fw_assisted_mclk_switch) - sizeof(cmd.fw_assisted_mclk_switch.header); |
| |
| // Send the command to the DMCUB. |
| dc_wake_and_execute_dmub_cmd(dc->ctx, &cmd, DM_DMUB_WAIT_TYPE_WAIT); |
| |
| return true; |
| } |
| |
| void dc_dmub_srv_query_caps_cmd(struct dc_dmub_srv *dc_dmub_srv) |
| { |
| union dmub_rb_cmd cmd = { 0 }; |
| |
| if (dc_dmub_srv->ctx->dc->debug.dmcub_emulation) |
| return; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| |
| /* Prepare fw command */ |
| cmd.query_feature_caps.header.type = DMUB_CMD__QUERY_FEATURE_CAPS; |
| cmd.query_feature_caps.header.sub_type = 0; |
| cmd.query_feature_caps.header.ret_status = 1; |
| cmd.query_feature_caps.header.payload_bytes = sizeof(struct dmub_cmd_query_feature_caps_data); |
| |
| /* If command was processed, copy feature caps to dmub srv */ |
| if (dc_wake_and_execute_dmub_cmd(dc_dmub_srv->ctx, &cmd, DM_DMUB_WAIT_TYPE_WAIT_WITH_REPLY) && |
| cmd.query_feature_caps.header.ret_status == 0) { |
| memcpy(&dc_dmub_srv->dmub->feature_caps, |
| &cmd.query_feature_caps.query_feature_caps_data, |
| sizeof(struct dmub_feature_caps)); |
| } |
| } |
| |
| void dc_dmub_srv_get_visual_confirm_color_cmd(struct dc *dc, struct pipe_ctx *pipe_ctx) |
| { |
| union dmub_rb_cmd cmd = { 0 }; |
| unsigned int panel_inst = 0; |
| |
| if (!dc_get_edp_link_panel_inst(dc, pipe_ctx->stream->link, &panel_inst)) |
| return; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| |
| // Prepare fw command |
| cmd.visual_confirm_color.header.type = DMUB_CMD__GET_VISUAL_CONFIRM_COLOR; |
| cmd.visual_confirm_color.header.sub_type = 0; |
| cmd.visual_confirm_color.header.ret_status = 1; |
| cmd.visual_confirm_color.header.payload_bytes = sizeof(struct dmub_cmd_visual_confirm_color_data); |
| cmd.visual_confirm_color.visual_confirm_color_data.visual_confirm_color.panel_inst = panel_inst; |
| |
| // If command was processed, copy feature caps to dmub srv |
| if (dc_wake_and_execute_dmub_cmd(dc->ctx, &cmd, DM_DMUB_WAIT_TYPE_WAIT_WITH_REPLY) && |
| cmd.visual_confirm_color.header.ret_status == 0) { |
| memcpy(&dc->ctx->dmub_srv->dmub->visual_confirm_color, |
| &cmd.visual_confirm_color.visual_confirm_color_data, |
| sizeof(struct dmub_visual_confirm_color)); |
| } |
| } |
| |
| /** |
| * populate_subvp_cmd_drr_info - Helper to populate DRR pipe info for the DMCUB subvp command |
| * |
| * @dc: [in] pointer to dc object |
| * @subvp_pipe: [in] pipe_ctx for the SubVP pipe |
| * @vblank_pipe: [in] pipe_ctx for the DRR pipe |
| * @pipe_data: [in] Pipe data which stores the VBLANK/DRR info |
| * @context: [in] DC state for access to phantom stream |
| * |
| * Populate the DMCUB SubVP command with DRR pipe info. All the information |
| * required for calculating the SubVP + DRR microschedule is populated here. |
| * |
| * High level algorithm: |
| * 1. Get timing for SubVP pipe, phantom pipe, and DRR pipe |
| * 2. Calculate the min and max vtotal which supports SubVP + DRR microschedule |
| * 3. Populate the drr_info with the min and max supported vtotal values |
| */ |
| static void populate_subvp_cmd_drr_info(struct dc *dc, |
| struct dc_state *context, |
| struct pipe_ctx *subvp_pipe, |
| struct pipe_ctx *vblank_pipe, |
| struct dmub_cmd_fw_assisted_mclk_switch_pipe_data_v2 *pipe_data) |
| { |
| struct dc_stream_state *phantom_stream = dc_state_get_paired_subvp_stream(context, subvp_pipe->stream); |
| struct dc_crtc_timing *main_timing = &subvp_pipe->stream->timing; |
| struct dc_crtc_timing *phantom_timing; |
| struct dc_crtc_timing *drr_timing = &vblank_pipe->stream->timing; |
| uint16_t drr_frame_us = 0; |
| uint16_t min_drr_supported_us = 0; |
| uint16_t max_drr_supported_us = 0; |
| uint16_t max_drr_vblank_us = 0; |
| uint16_t max_drr_mallregion_us = 0; |
| uint16_t mall_region_us = 0; |
| uint16_t prefetch_us = 0; |
| uint16_t subvp_active_us = 0; |
| uint16_t drr_active_us = 0; |
| uint16_t min_vtotal_supported = 0; |
| uint16_t max_vtotal_supported = 0; |
| |
| if (!phantom_stream) |
| return; |
| |
| phantom_timing = &phantom_stream->timing; |
| |
| pipe_data->pipe_config.vblank_data.drr_info.drr_in_use = true; |
| pipe_data->pipe_config.vblank_data.drr_info.use_ramping = false; // for now don't use ramping |
| pipe_data->pipe_config.vblank_data.drr_info.drr_window_size_ms = 4; // hardcode 4ms DRR window for now |
| |
| drr_frame_us = div64_u64(((uint64_t)drr_timing->v_total * drr_timing->h_total * 1000000), |
| (((uint64_t)drr_timing->pix_clk_100hz * 100))); |
| // P-State allow width and FW delays already included phantom_timing->v_addressable |
| mall_region_us = div64_u64(((uint64_t)phantom_timing->v_addressable * phantom_timing->h_total * 1000000), |
| (((uint64_t)phantom_timing->pix_clk_100hz * 100))); |
| min_drr_supported_us = drr_frame_us + mall_region_us + SUBVP_DRR_MARGIN_US; |
| min_vtotal_supported = div64_u64(((uint64_t)drr_timing->pix_clk_100hz * 100 * min_drr_supported_us), |
| (((uint64_t)drr_timing->h_total * 1000000))); |
| |
| prefetch_us = div64_u64(((uint64_t)(phantom_timing->v_total - phantom_timing->v_front_porch) * phantom_timing->h_total * 1000000), |
| (((uint64_t)phantom_timing->pix_clk_100hz * 100) + dc->caps.subvp_prefetch_end_to_mall_start_us)); |
| subvp_active_us = div64_u64(((uint64_t)main_timing->v_addressable * main_timing->h_total * 1000000), |
| (((uint64_t)main_timing->pix_clk_100hz * 100))); |
| drr_active_us = div64_u64(((uint64_t)drr_timing->v_addressable * drr_timing->h_total * 1000000), |
| (((uint64_t)drr_timing->pix_clk_100hz * 100))); |
| max_drr_vblank_us = div64_u64((subvp_active_us - prefetch_us - |
| dc->caps.subvp_fw_processing_delay_us - drr_active_us), 2) + drr_active_us; |
| max_drr_mallregion_us = subvp_active_us - prefetch_us - mall_region_us - dc->caps.subvp_fw_processing_delay_us; |
| max_drr_supported_us = max_drr_vblank_us > max_drr_mallregion_us ? max_drr_vblank_us : max_drr_mallregion_us; |
| max_vtotal_supported = div64_u64(((uint64_t)drr_timing->pix_clk_100hz * 100 * max_drr_supported_us), |
| (((uint64_t)drr_timing->h_total * 1000000))); |
| |
| /* When calculating the max vtotal supported for SubVP + DRR cases, add |
| * margin due to possible rounding errors (being off by 1 line in the |
| * FW calculation can incorrectly push the P-State switch to wait 1 frame |
| * longer). |
| */ |
| max_vtotal_supported = max_vtotal_supported - dc->caps.subvp_drr_max_vblank_margin_us; |
| |
| pipe_data->pipe_config.vblank_data.drr_info.min_vtotal_supported = min_vtotal_supported; |
| pipe_data->pipe_config.vblank_data.drr_info.max_vtotal_supported = max_vtotal_supported; |
| pipe_data->pipe_config.vblank_data.drr_info.drr_vblank_start_margin = dc->caps.subvp_drr_vblank_start_margin_us; |
| } |
| |
| /** |
| * populate_subvp_cmd_vblank_pipe_info - Helper to populate VBLANK pipe info for the DMUB subvp command |
| * |
| * @dc: [in] current dc state |
| * @context: [in] new dc state |
| * @cmd: [in] DMUB cmd to be populated with SubVP info |
| * @vblank_pipe: [in] pipe_ctx for the VBLANK pipe |
| * @cmd_pipe_index: [in] index for the pipe array in DMCUB SubVP cmd |
| * |
| * Populate the DMCUB SubVP command with VBLANK pipe info. All the information |
| * required to calculate the microschedule for SubVP + VBLANK case is stored in |
| * the pipe_data (subvp_data and vblank_data). Also check if the VBLANK pipe |
| * is a DRR display -- if it is make a call to populate drr_info. |
| */ |
| static void populate_subvp_cmd_vblank_pipe_info(struct dc *dc, |
| struct dc_state *context, |
| union dmub_rb_cmd *cmd, |
| struct pipe_ctx *vblank_pipe, |
| uint8_t cmd_pipe_index) |
| { |
| uint32_t i; |
| struct pipe_ctx *pipe = NULL; |
| struct dmub_cmd_fw_assisted_mclk_switch_pipe_data_v2 *pipe_data = |
| &cmd->fw_assisted_mclk_switch_v2.config_data.pipe_data[cmd_pipe_index]; |
| |
| // Find the SubVP pipe |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| pipe = &context->res_ctx.pipe_ctx[i]; |
| |
| // We check for master pipe, but it shouldn't matter since we only need |
| // the pipe for timing info (stream should be same for any pipe splits) |
| if (!resource_is_pipe_type(pipe, OTG_MASTER) || |
| !resource_is_pipe_type(pipe, DPP_PIPE)) |
| continue; |
| |
| // Find the SubVP pipe |
| if (dc_state_get_pipe_subvp_type(context, pipe) == SUBVP_MAIN) |
| break; |
| } |
| |
| pipe_data->mode = VBLANK; |
| pipe_data->pipe_config.vblank_data.pix_clk_100hz = vblank_pipe->stream->timing.pix_clk_100hz; |
| pipe_data->pipe_config.vblank_data.vblank_start = vblank_pipe->stream->timing.v_total - |
| vblank_pipe->stream->timing.v_front_porch; |
| pipe_data->pipe_config.vblank_data.vtotal = vblank_pipe->stream->timing.v_total; |
| pipe_data->pipe_config.vblank_data.htotal = vblank_pipe->stream->timing.h_total; |
| pipe_data->pipe_config.vblank_data.vblank_pipe_index = vblank_pipe->pipe_idx; |
| pipe_data->pipe_config.vblank_data.vstartup_start = vblank_pipe->pipe_dlg_param.vstartup_start; |
| pipe_data->pipe_config.vblank_data.vblank_end = |
| vblank_pipe->stream->timing.v_total - vblank_pipe->stream->timing.v_front_porch - vblank_pipe->stream->timing.v_addressable; |
| |
| if (vblank_pipe->stream->ignore_msa_timing_param && |
| (vblank_pipe->stream->allow_freesync || vblank_pipe->stream->vrr_active_variable || vblank_pipe->stream->vrr_active_fixed)) |
| populate_subvp_cmd_drr_info(dc, context, pipe, vblank_pipe, pipe_data); |
| } |
| |
| /** |
| * update_subvp_prefetch_end_to_mall_start - Helper for SubVP + SubVP case |
| * |
| * @dc: [in] current dc state |
| * @context: [in] new dc state |
| * @cmd: [in] DMUB cmd to be populated with SubVP info |
| * @subvp_pipes: [in] Array of SubVP pipes (should always be length 2) |
| * |
| * For SubVP + SubVP, we use a single vertical interrupt to start the |
| * microschedule for both SubVP pipes. In order for this to work correctly, the |
| * MALL REGION of both SubVP pipes must start at the same time. This function |
| * lengthens the prefetch end to mall start delay of the SubVP pipe that has |
| * the shorter prefetch so that both MALL REGION's will start at the same time. |
| */ |
| static void update_subvp_prefetch_end_to_mall_start(struct dc *dc, |
| struct dc_state *context, |
| union dmub_rb_cmd *cmd, |
| struct pipe_ctx *subvp_pipes[]) |
| { |
| uint32_t subvp0_prefetch_us = 0; |
| uint32_t subvp1_prefetch_us = 0; |
| uint32_t prefetch_delta_us = 0; |
| struct dc_stream_state *phantom_stream0 = NULL; |
| struct dc_stream_state *phantom_stream1 = NULL; |
| struct dc_crtc_timing *phantom_timing0 = NULL; |
| struct dc_crtc_timing *phantom_timing1 = NULL; |
| struct dmub_cmd_fw_assisted_mclk_switch_pipe_data_v2 *pipe_data = NULL; |
| |
| phantom_stream0 = dc_state_get_paired_subvp_stream(context, subvp_pipes[0]->stream); |
| if (!phantom_stream0) |
| return; |
| |
| phantom_stream1 = dc_state_get_paired_subvp_stream(context, subvp_pipes[1]->stream); |
| if (!phantom_stream1) |
| return; |
| |
| phantom_timing0 = &phantom_stream0->timing; |
| phantom_timing1 = &phantom_stream1->timing; |
| |
| subvp0_prefetch_us = div64_u64(((uint64_t)(phantom_timing0->v_total - phantom_timing0->v_front_porch) * |
| (uint64_t)phantom_timing0->h_total * 1000000), |
| (((uint64_t)phantom_timing0->pix_clk_100hz * 100) + dc->caps.subvp_prefetch_end_to_mall_start_us)); |
| subvp1_prefetch_us = div64_u64(((uint64_t)(phantom_timing1->v_total - phantom_timing1->v_front_porch) * |
| (uint64_t)phantom_timing1->h_total * 1000000), |
| (((uint64_t)phantom_timing1->pix_clk_100hz * 100) + dc->caps.subvp_prefetch_end_to_mall_start_us)); |
| |
| // Whichever SubVP PIPE has the smaller prefetch (including the prefetch end to mall start time) |
| // should increase it's prefetch time to match the other |
| if (subvp0_prefetch_us > subvp1_prefetch_us) { |
| pipe_data = &cmd->fw_assisted_mclk_switch_v2.config_data.pipe_data[1]; |
| prefetch_delta_us = subvp0_prefetch_us - subvp1_prefetch_us; |
| pipe_data->pipe_config.subvp_data.prefetch_to_mall_start_lines = |
| div64_u64(((uint64_t)(dc->caps.subvp_prefetch_end_to_mall_start_us + prefetch_delta_us) * |
| ((uint64_t)phantom_timing1->pix_clk_100hz * 100) + ((uint64_t)phantom_timing1->h_total * 1000000 - 1)), |
| ((uint64_t)phantom_timing1->h_total * 1000000)); |
| |
| } else if (subvp1_prefetch_us > subvp0_prefetch_us) { |
| pipe_data = &cmd->fw_assisted_mclk_switch_v2.config_data.pipe_data[0]; |
| prefetch_delta_us = subvp1_prefetch_us - subvp0_prefetch_us; |
| pipe_data->pipe_config.subvp_data.prefetch_to_mall_start_lines = |
| div64_u64(((uint64_t)(dc->caps.subvp_prefetch_end_to_mall_start_us + prefetch_delta_us) * |
| ((uint64_t)phantom_timing0->pix_clk_100hz * 100) + ((uint64_t)phantom_timing0->h_total * 1000000 - 1)), |
| ((uint64_t)phantom_timing0->h_total * 1000000)); |
| } |
| } |
| |
| /** |
| * populate_subvp_cmd_pipe_info - Helper to populate the SubVP pipe info for the DMUB subvp command |
| * |
| * @dc: [in] current dc state |
| * @context: [in] new dc state |
| * @cmd: [in] DMUB cmd to be populated with SubVP info |
| * @subvp_pipe: [in] pipe_ctx for the SubVP pipe |
| * @cmd_pipe_index: [in] index for the pipe array in DMCUB SubVP cmd |
| * |
| * Populate the DMCUB SubVP command with SubVP pipe info. All the information |
| * required to calculate the microschedule for the SubVP pipe is stored in the |
| * pipe_data of the DMCUB SubVP command. |
| */ |
| static void populate_subvp_cmd_pipe_info(struct dc *dc, |
| struct dc_state *context, |
| union dmub_rb_cmd *cmd, |
| struct pipe_ctx *subvp_pipe, |
| uint8_t cmd_pipe_index) |
| { |
| uint32_t j; |
| struct dmub_cmd_fw_assisted_mclk_switch_pipe_data_v2 *pipe_data = |
| &cmd->fw_assisted_mclk_switch_v2.config_data.pipe_data[cmd_pipe_index]; |
| struct dc_stream_state *phantom_stream = dc_state_get_paired_subvp_stream(context, subvp_pipe->stream); |
| struct dc_crtc_timing *main_timing = &subvp_pipe->stream->timing; |
| struct dc_crtc_timing *phantom_timing; |
| uint32_t out_num_stream, out_den_stream, out_num_plane, out_den_plane, out_num, out_den; |
| |
| if (!phantom_stream) |
| return; |
| |
| phantom_timing = &phantom_stream->timing; |
| |
| pipe_data->mode = SUBVP; |
| pipe_data->pipe_config.subvp_data.pix_clk_100hz = subvp_pipe->stream->timing.pix_clk_100hz; |
| pipe_data->pipe_config.subvp_data.htotal = subvp_pipe->stream->timing.h_total; |
| pipe_data->pipe_config.subvp_data.vtotal = subvp_pipe->stream->timing.v_total; |
| pipe_data->pipe_config.subvp_data.main_vblank_start = |
| main_timing->v_total - main_timing->v_front_porch; |
| pipe_data->pipe_config.subvp_data.main_vblank_end = |
| main_timing->v_total - main_timing->v_front_porch - main_timing->v_addressable; |
| pipe_data->pipe_config.subvp_data.mall_region_lines = phantom_timing->v_addressable; |
| pipe_data->pipe_config.subvp_data.main_pipe_index = subvp_pipe->stream_res.tg->inst; |
| pipe_data->pipe_config.subvp_data.is_drr = subvp_pipe->stream->ignore_msa_timing_param && |
| (subvp_pipe->stream->allow_freesync || subvp_pipe->stream->vrr_active_variable || subvp_pipe->stream->vrr_active_fixed); |
| |
| /* Calculate the scaling factor from the src and dst height. |
| * e.g. If 3840x2160 being downscaled to 1920x1080, the scaling factor is 1/2. |
| * Reduce the fraction 1080/2160 = 1/2 for the "scaling factor" |
| * |
| * Make sure to combine stream and plane scaling together. |
| */ |
| reduce_fraction(subvp_pipe->stream->src.height, subvp_pipe->stream->dst.height, |
| &out_num_stream, &out_den_stream); |
| reduce_fraction(subvp_pipe->plane_state->src_rect.height, subvp_pipe->plane_state->dst_rect.height, |
| &out_num_plane, &out_den_plane); |
| reduce_fraction(out_num_stream * out_num_plane, out_den_stream * out_den_plane, &out_num, &out_den); |
| pipe_data->pipe_config.subvp_data.scale_factor_numerator = out_num; |
| pipe_data->pipe_config.subvp_data.scale_factor_denominator = out_den; |
| |
| // Prefetch lines is equal to VACTIVE + BP + VSYNC |
| pipe_data->pipe_config.subvp_data.prefetch_lines = |
| phantom_timing->v_total - phantom_timing->v_front_porch; |
| |
| // Round up |
| pipe_data->pipe_config.subvp_data.prefetch_to_mall_start_lines = |
| div64_u64(((uint64_t)dc->caps.subvp_prefetch_end_to_mall_start_us * ((uint64_t)phantom_timing->pix_clk_100hz * 100) + |
| ((uint64_t)phantom_timing->h_total * 1000000 - 1)), ((uint64_t)phantom_timing->h_total * 1000000)); |
| pipe_data->pipe_config.subvp_data.processing_delay_lines = |
| div64_u64(((uint64_t)(dc->caps.subvp_fw_processing_delay_us) * ((uint64_t)phantom_timing->pix_clk_100hz * 100) + |
| ((uint64_t)phantom_timing->h_total * 1000000 - 1)), ((uint64_t)phantom_timing->h_total * 1000000)); |
| |
| if (subvp_pipe->bottom_pipe) { |
| pipe_data->pipe_config.subvp_data.main_split_pipe_index = subvp_pipe->bottom_pipe->pipe_idx; |
| } else if (subvp_pipe->next_odm_pipe) { |
| pipe_data->pipe_config.subvp_data.main_split_pipe_index = subvp_pipe->next_odm_pipe->pipe_idx; |
| } else { |
| pipe_data->pipe_config.subvp_data.main_split_pipe_index = 0xF; |
| } |
| |
| // Find phantom pipe index based on phantom stream |
| for (j = 0; j < dc->res_pool->pipe_count; j++) { |
| struct pipe_ctx *phantom_pipe = &context->res_ctx.pipe_ctx[j]; |
| |
| if (resource_is_pipe_type(phantom_pipe, OTG_MASTER) && |
| phantom_pipe->stream == dc_state_get_paired_subvp_stream(context, subvp_pipe->stream)) { |
| pipe_data->pipe_config.subvp_data.phantom_pipe_index = phantom_pipe->stream_res.tg->inst; |
| if (phantom_pipe->bottom_pipe) { |
| pipe_data->pipe_config.subvp_data.phantom_split_pipe_index = phantom_pipe->bottom_pipe->plane_res.hubp->inst; |
| } else if (phantom_pipe->next_odm_pipe) { |
| pipe_data->pipe_config.subvp_data.phantom_split_pipe_index = phantom_pipe->next_odm_pipe->plane_res.hubp->inst; |
| } else { |
| pipe_data->pipe_config.subvp_data.phantom_split_pipe_index = 0xF; |
| } |
| break; |
| } |
| } |
| } |
| |
| /** |
| * dc_dmub_setup_subvp_dmub_command - Populate the DMCUB SubVP command |
| * |
| * @dc: [in] current dc state |
| * @context: [in] new dc state |
| * @enable: [in] if true enables the pipes population |
| * |
| * This function loops through each pipe and populates the DMUB SubVP CMD info |
| * based on the pipe (e.g. SubVP, VBLANK). |
| */ |
| void dc_dmub_setup_subvp_dmub_command(struct dc *dc, |
| struct dc_state *context, |
| bool enable) |
| { |
| uint8_t cmd_pipe_index = 0; |
| uint32_t i, pipe_idx; |
| uint8_t subvp_count = 0; |
| union dmub_rb_cmd cmd; |
| struct pipe_ctx *subvp_pipes[2]; |
| uint32_t wm_val_refclk = 0; |
| enum mall_stream_type pipe_mall_type; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| // FW command for SUBVP |
| cmd.fw_assisted_mclk_switch_v2.header.type = DMUB_CMD__FW_ASSISTED_MCLK_SWITCH; |
| cmd.fw_assisted_mclk_switch_v2.header.sub_type = DMUB_CMD__HANDLE_SUBVP_CMD; |
| cmd.fw_assisted_mclk_switch_v2.header.payload_bytes = |
| sizeof(cmd.fw_assisted_mclk_switch_v2) - sizeof(cmd.fw_assisted_mclk_switch_v2.header); |
| |
| for (i = 0; i < dc->res_pool->pipe_count; i++) { |
| struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; |
| |
| /* For SubVP pipe count, only count the top most (ODM / MPC) pipe |
| */ |
| if (resource_is_pipe_type(pipe, OTG_MASTER) && |
| resource_is_pipe_type(pipe, DPP_PIPE) && |
| dc_state_get_pipe_subvp_type(context, pipe) == SUBVP_MAIN) |
| subvp_pipes[subvp_count++] = pipe; |
| } |
| |
| if (enable) { |
| // For each pipe that is a "main" SUBVP pipe, fill in pipe data for DMUB SUBVP cmd |
| for (i = 0, pipe_idx = 0; i < dc->res_pool->pipe_count; i++) { |
| struct pipe_ctx *pipe = &context->res_ctx.pipe_ctx[i]; |
| pipe_mall_type = dc_state_get_pipe_subvp_type(context, pipe); |
| |
| if (!pipe->stream) |
| continue; |
| |
| /* When populating subvp cmd info, only pass in the top most (ODM / MPC) pipe. |
| * Any ODM or MPC splits being used in SubVP will be handled internally in |
| * populate_subvp_cmd_pipe_info |
| */ |
| if (resource_is_pipe_type(pipe, OTG_MASTER) && |
| resource_is_pipe_type(pipe, DPP_PIPE) && |
| pipe_mall_type == SUBVP_MAIN) { |
| populate_subvp_cmd_pipe_info(dc, context, &cmd, pipe, cmd_pipe_index++); |
| } else if (resource_is_pipe_type(pipe, OTG_MASTER) && |
| resource_is_pipe_type(pipe, DPP_PIPE) && |
| pipe_mall_type == SUBVP_NONE) { |
| // Don't need to check for ActiveDRAMClockChangeMargin < 0, not valid in cases where |
| // we run through DML without calculating "natural" P-state support |
| populate_subvp_cmd_vblank_pipe_info(dc, context, &cmd, pipe, cmd_pipe_index++); |
| |
| } |
| pipe_idx++; |
| } |
| if (subvp_count == 2) { |
| update_subvp_prefetch_end_to_mall_start(dc, context, &cmd, subvp_pipes); |
| } |
| cmd.fw_assisted_mclk_switch_v2.config_data.pstate_allow_width_us = dc->caps.subvp_pstate_allow_width_us; |
| cmd.fw_assisted_mclk_switch_v2.config_data.vertical_int_margin_us = dc->caps.subvp_vertical_int_margin_us; |
| |
| // Store the original watermark value for this SubVP config so we can lower it when the |
| // MCLK switch starts |
| wm_val_refclk = context->bw_ctx.bw.dcn.watermarks.a.cstate_pstate.pstate_change_ns * |
| (dc->res_pool->ref_clocks.dchub_ref_clock_inKhz / 1000) / 1000; |
| |
| cmd.fw_assisted_mclk_switch_v2.config_data.watermark_a_cache = wm_val_refclk < 0xFFFF ? wm_val_refclk : 0xFFFF; |
| } |
| |
| dc_wake_and_execute_dmub_cmd(dc->ctx, &cmd, DM_DMUB_WAIT_TYPE_WAIT); |
| } |
| |
| bool dc_dmub_srv_get_diagnostic_data(struct dc_dmub_srv *dc_dmub_srv, struct dmub_diagnostic_data *diag_data) |
| { |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub || !diag_data) |
| return false; |
| return dmub_srv_get_diagnostic_data(dc_dmub_srv->dmub, diag_data); |
| } |
| |
| void dc_dmub_srv_log_diagnostic_data(struct dc_dmub_srv *dc_dmub_srv) |
| { |
| struct dmub_diagnostic_data diag_data = {0}; |
| uint32_t i; |
| |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub) { |
| DC_LOG_ERROR("%s: invalid parameters.", __func__); |
| return; |
| } |
| |
| DC_LOG_ERROR("%s: DMCUB error - collecting diagnostic data\n", __func__); |
| |
| if (!dc_dmub_srv_get_diagnostic_data(dc_dmub_srv, &diag_data)) { |
| DC_LOG_ERROR("%s: dc_dmub_srv_get_diagnostic_data failed.", __func__); |
| return; |
| } |
| |
| DC_LOG_DEBUG("DMCUB STATE:"); |
| DC_LOG_DEBUG(" dmcub_version : %08x", diag_data.dmcub_version); |
| DC_LOG_DEBUG(" scratch [0] : %08x", diag_data.scratch[0]); |
| DC_LOG_DEBUG(" scratch [1] : %08x", diag_data.scratch[1]); |
| DC_LOG_DEBUG(" scratch [2] : %08x", diag_data.scratch[2]); |
| DC_LOG_DEBUG(" scratch [3] : %08x", diag_data.scratch[3]); |
| DC_LOG_DEBUG(" scratch [4] : %08x", diag_data.scratch[4]); |
| DC_LOG_DEBUG(" scratch [5] : %08x", diag_data.scratch[5]); |
| DC_LOG_DEBUG(" scratch [6] : %08x", diag_data.scratch[6]); |
| DC_LOG_DEBUG(" scratch [7] : %08x", diag_data.scratch[7]); |
| DC_LOG_DEBUG(" scratch [8] : %08x", diag_data.scratch[8]); |
| DC_LOG_DEBUG(" scratch [9] : %08x", diag_data.scratch[9]); |
| DC_LOG_DEBUG(" scratch [10] : %08x", diag_data.scratch[10]); |
| DC_LOG_DEBUG(" scratch [11] : %08x", diag_data.scratch[11]); |
| DC_LOG_DEBUG(" scratch [12] : %08x", diag_data.scratch[12]); |
| DC_LOG_DEBUG(" scratch [13] : %08x", diag_data.scratch[13]); |
| DC_LOG_DEBUG(" scratch [14] : %08x", diag_data.scratch[14]); |
| DC_LOG_DEBUG(" scratch [15] : %08x", diag_data.scratch[15]); |
| for (i = 0; i < DMUB_PC_SNAPSHOT_COUNT; i++) |
| DC_LOG_DEBUG(" pc[%d] : %08x", i, diag_data.pc[i]); |
| DC_LOG_DEBUG(" unk_fault_addr : %08x", diag_data.undefined_address_fault_addr); |
| DC_LOG_DEBUG(" inst_fault_addr : %08x", diag_data.inst_fetch_fault_addr); |
| DC_LOG_DEBUG(" data_fault_addr : %08x", diag_data.data_write_fault_addr); |
| DC_LOG_DEBUG(" inbox1_rptr : %08x", diag_data.inbox1_rptr); |
| DC_LOG_DEBUG(" inbox1_wptr : %08x", diag_data.inbox1_wptr); |
| DC_LOG_DEBUG(" inbox1_size : %08x", diag_data.inbox1_size); |
| DC_LOG_DEBUG(" inbox0_rptr : %08x", diag_data.inbox0_rptr); |
| DC_LOG_DEBUG(" inbox0_wptr : %08x", diag_data.inbox0_wptr); |
| DC_LOG_DEBUG(" inbox0_size : %08x", diag_data.inbox0_size); |
| DC_LOG_DEBUG(" outbox1_rptr : %08x", diag_data.outbox1_rptr); |
| DC_LOG_DEBUG(" outbox1_wptr : %08x", diag_data.outbox1_wptr); |
| DC_LOG_DEBUG(" outbox1_size : %08x", diag_data.outbox1_size); |
| DC_LOG_DEBUG(" is_enabled : %d", diag_data.is_dmcub_enabled); |
| DC_LOG_DEBUG(" is_soft_reset : %d", diag_data.is_dmcub_soft_reset); |
| DC_LOG_DEBUG(" is_secure_reset : %d", diag_data.is_dmcub_secure_reset); |
| DC_LOG_DEBUG(" is_traceport_en : %d", diag_data.is_traceport_en); |
| DC_LOG_DEBUG(" is_cw0_en : %d", diag_data.is_cw0_enabled); |
| DC_LOG_DEBUG(" is_cw6_en : %d", diag_data.is_cw6_enabled); |
| } |
| |
| static bool dc_can_pipe_disable_cursor(struct pipe_ctx *pipe_ctx) |
| { |
| struct pipe_ctx *test_pipe, *split_pipe; |
| const struct scaler_data *scl_data = &pipe_ctx->plane_res.scl_data; |
| struct rect r1 = scl_data->recout, r2, r2_half; |
| int r1_r = r1.x + r1.width, r1_b = r1.y + r1.height, r2_r, r2_b; |
| int cur_layer = pipe_ctx->plane_state->layer_index; |
| |
| /** |
| * Disable the cursor if there's another pipe above this with a |
| * plane that contains this pipe's viewport to prevent double cursor |
| * and incorrect scaling artifacts. |
| */ |
| for (test_pipe = pipe_ctx->top_pipe; test_pipe; |
| test_pipe = test_pipe->top_pipe) { |
| // Skip invisible layer and pipe-split plane on same layer |
| if (!test_pipe->plane_state->visible || test_pipe->plane_state->layer_index == cur_layer) |
| continue; |
| |
| r2 = test_pipe->plane_res.scl_data.recout; |
| r2_r = r2.x + r2.width; |
| r2_b = r2.y + r2.height; |
| split_pipe = test_pipe; |
| |
| /** |
| * There is another half plane on same layer because of |
| * pipe-split, merge together per same height. |
| */ |
| for (split_pipe = pipe_ctx->top_pipe; split_pipe; |
| split_pipe = split_pipe->top_pipe) |
| if (split_pipe->plane_state->layer_index == test_pipe->plane_state->layer_index) { |
| r2_half = split_pipe->plane_res.scl_data.recout; |
| r2.x = (r2_half.x < r2.x) ? r2_half.x : r2.x; |
| r2.width = r2.width + r2_half.width; |
| r2_r = r2.x + r2.width; |
| break; |
| } |
| |
| if (r1.x >= r2.x && r1.y >= r2.y && r1_r <= r2_r && r1_b <= r2_b) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static bool dc_dmub_should_update_cursor_data(struct pipe_ctx *pipe_ctx) |
| { |
| if (pipe_ctx->plane_state != NULL) { |
| if (pipe_ctx->plane_state->address.type == PLN_ADDR_TYPE_VIDEO_PROGRESSIVE) |
| return false; |
| |
| if (dc_can_pipe_disable_cursor(pipe_ctx)) |
| return false; |
| } |
| |
| if ((pipe_ctx->stream->link->psr_settings.psr_version == DC_PSR_VERSION_SU_1 || |
| pipe_ctx->stream->link->psr_settings.psr_version == DC_PSR_VERSION_1) && |
| pipe_ctx->stream->ctx->dce_version >= DCN_VERSION_3_1) |
| return true; |
| |
| if (pipe_ctx->stream->link->replay_settings.config.replay_supported) |
| return true; |
| |
| return false; |
| } |
| |
| static void dc_build_cursor_update_payload0( |
| struct pipe_ctx *pipe_ctx, uint8_t p_idx, |
| struct dmub_cmd_update_cursor_payload0 *payload) |
| { |
| struct hubp *hubp = pipe_ctx->plane_res.hubp; |
| unsigned int panel_inst = 0; |
| |
| if (!dc_get_edp_link_panel_inst(hubp->ctx->dc, |
| pipe_ctx->stream->link, &panel_inst)) |
| return; |
| |
| /* Payload: Cursor Rect is built from position & attribute |
| * x & y are obtained from postion |
| */ |
| payload->cursor_rect.x = hubp->cur_rect.x; |
| payload->cursor_rect.y = hubp->cur_rect.y; |
| /* w & h are obtained from attribute */ |
| payload->cursor_rect.width = hubp->cur_rect.w; |
| payload->cursor_rect.height = hubp->cur_rect.h; |
| |
| payload->enable = hubp->pos.cur_ctl.bits.cur_enable; |
| payload->pipe_idx = p_idx; |
| payload->cmd_version = DMUB_CMD_PSR_CONTROL_VERSION_1; |
| payload->panel_inst = panel_inst; |
| } |
| |
| static void dc_build_cursor_position_update_payload0( |
| struct dmub_cmd_update_cursor_payload0 *pl, const uint8_t p_idx, |
| const struct hubp *hubp, const struct dpp *dpp) |
| { |
| /* Hubp */ |
| pl->position_cfg.pHubp.cur_ctl.raw = hubp->pos.cur_ctl.raw; |
| pl->position_cfg.pHubp.position.raw = hubp->pos.position.raw; |
| pl->position_cfg.pHubp.hot_spot.raw = hubp->pos.hot_spot.raw; |
| pl->position_cfg.pHubp.dst_offset.raw = hubp->pos.dst_offset.raw; |
| |
| /* dpp */ |
| pl->position_cfg.pDpp.cur0_ctl.raw = dpp->pos.cur0_ctl.raw; |
| pl->position_cfg.pipe_idx = p_idx; |
| } |
| |
| static void dc_build_cursor_attribute_update_payload1( |
| struct dmub_cursor_attributes_cfg *pl_A, const uint8_t p_idx, |
| const struct hubp *hubp, const struct dpp *dpp) |
| { |
| /* Hubp */ |
| pl_A->aHubp.SURFACE_ADDR_HIGH = hubp->att.SURFACE_ADDR_HIGH; |
| pl_A->aHubp.SURFACE_ADDR = hubp->att.SURFACE_ADDR; |
| pl_A->aHubp.cur_ctl.raw = hubp->att.cur_ctl.raw; |
| pl_A->aHubp.size.raw = hubp->att.size.raw; |
| pl_A->aHubp.settings.raw = hubp->att.settings.raw; |
| |
| /* dpp */ |
| pl_A->aDpp.cur0_ctl.raw = dpp->att.cur0_ctl.raw; |
| } |
| |
| /** |
| * dc_send_update_cursor_info_to_dmu - Populate the DMCUB Cursor update info command |
| * |
| * @pCtx: [in] pipe context |
| * @pipe_idx: [in] pipe index |
| * |
| * This function would store the cursor related information and pass it into |
| * dmub |
| */ |
| void dc_send_update_cursor_info_to_dmu( |
| struct pipe_ctx *pCtx, uint8_t pipe_idx) |
| { |
| union dmub_rb_cmd cmd[2]; |
| union dmub_cmd_update_cursor_info_data *update_cursor_info_0 = |
| &cmd[0].update_cursor_info.update_cursor_info_data; |
| |
| memset(cmd, 0, sizeof(cmd)); |
| |
| if (!dc_dmub_should_update_cursor_data(pCtx)) |
| return; |
| /* |
| * Since we use multi_cmd_pending for dmub command, the 2nd command is |
| * only assigned to store cursor attributes info. |
| * 1st command can view as 2 parts, 1st is for PSR/Replay data, the other |
| * is to store cursor position info. |
| * |
| * Command heaer type must be the same type if using multi_cmd_pending. |
| * Besides, while process 2nd command in DMU, the sub type is useless. |
| * So it's meanless to pass the sub type header with different type. |
| */ |
| |
| { |
| /* Build Payload#0 Header */ |
| cmd[0].update_cursor_info.header.type = DMUB_CMD__UPDATE_CURSOR_INFO; |
| cmd[0].update_cursor_info.header.payload_bytes = |
| sizeof(cmd[0].update_cursor_info.update_cursor_info_data); |
| cmd[0].update_cursor_info.header.multi_cmd_pending = 1; //To combine multi dmu cmd, 1st cmd |
| |
| /* Prepare Payload */ |
| dc_build_cursor_update_payload0(pCtx, pipe_idx, &update_cursor_info_0->payload0); |
| |
| dc_build_cursor_position_update_payload0(&update_cursor_info_0->payload0, pipe_idx, |
| pCtx->plane_res.hubp, pCtx->plane_res.dpp); |
| } |
| { |
| /* Build Payload#1 Header */ |
| cmd[1].update_cursor_info.header.type = DMUB_CMD__UPDATE_CURSOR_INFO; |
| cmd[1].update_cursor_info.header.payload_bytes = sizeof(struct cursor_attributes_cfg); |
| cmd[1].update_cursor_info.header.multi_cmd_pending = 0; //Indicate it's the last command. |
| |
| dc_build_cursor_attribute_update_payload1( |
| &cmd[1].update_cursor_info.update_cursor_info_data.payload1.attribute_cfg, |
| pipe_idx, pCtx->plane_res.hubp, pCtx->plane_res.dpp); |
| |
| /* Combine 2nd cmds update_curosr_info to DMU */ |
| dc_wake_and_execute_dmub_cmd_list(pCtx->stream->ctx, 2, cmd, DM_DMUB_WAIT_TYPE_WAIT); |
| } |
| } |
| |
| bool dc_dmub_check_min_version(struct dmub_srv *srv) |
| { |
| if (!srv->hw_funcs.is_psrsu_supported) |
| return true; |
| return srv->hw_funcs.is_psrsu_supported(srv); |
| } |
| |
| void dc_dmub_srv_enable_dpia_trace(const struct dc *dc) |
| { |
| struct dc_dmub_srv *dc_dmub_srv = dc->ctx->dmub_srv; |
| |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub) { |
| DC_LOG_ERROR("%s: invalid parameters.", __func__); |
| return; |
| } |
| |
| if (!dc_wake_and_execute_gpint(dc->ctx, DMUB_GPINT__SET_TRACE_BUFFER_MASK_WORD1, |
| 0x0010, NULL, DM_DMUB_WAIT_TYPE_WAIT)) { |
| DC_LOG_ERROR("timeout updating trace buffer mask word\n"); |
| return; |
| } |
| |
| if (!dc_wake_and_execute_gpint(dc->ctx, DMUB_GPINT__UPDATE_TRACE_BUFFER_MASK, |
| 0x0000, NULL, DM_DMUB_WAIT_TYPE_WAIT)) { |
| DC_LOG_ERROR("timeout updating trace buffer mask word\n"); |
| return; |
| } |
| |
| DC_LOG_DEBUG("Enabled DPIA trace\n"); |
| } |
| |
| void dc_dmub_srv_subvp_save_surf_addr(const struct dc_dmub_srv *dc_dmub_srv, const struct dc_plane_address *addr, uint8_t subvp_index) |
| { |
| dmub_srv_subvp_save_surf_addr(dc_dmub_srv->dmub, addr, subvp_index); |
| } |
| |
| bool dc_dmub_srv_is_hw_pwr_up(struct dc_dmub_srv *dc_dmub_srv, bool wait) |
| { |
| struct dc_context *dc_ctx; |
| enum dmub_status status; |
| |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub) |
| return true; |
| |
| if (dc_dmub_srv->ctx->dc->debug.dmcub_emulation) |
| return true; |
| |
| dc_ctx = dc_dmub_srv->ctx; |
| |
| if (wait) { |
| if (dc_dmub_srv->ctx->dc->debug.disable_timeout) { |
| do { |
| status = dmub_srv_wait_for_hw_pwr_up(dc_dmub_srv->dmub, 500000); |
| } while (status != DMUB_STATUS_OK); |
| } else { |
| status = dmub_srv_wait_for_hw_pwr_up(dc_dmub_srv->dmub, 500000); |
| if (status != DMUB_STATUS_OK) { |
| DC_ERROR("Error querying DMUB hw power up status: error=%d\n", status); |
| return false; |
| } |
| } |
| } else |
| return dmub_srv_is_hw_pwr_up(dc_dmub_srv->dmub); |
| |
| return true; |
| } |
| |
| static int count_active_streams(const struct dc *dc) |
| { |
| int i, count = 0; |
| |
| for (i = 0; i < dc->current_state->stream_count; ++i) { |
| struct dc_stream_state *stream = dc->current_state->streams[i]; |
| |
| if (stream && !stream->dpms_off) |
| count += 1; |
| } |
| |
| return count; |
| } |
| |
| static void dc_dmub_srv_notify_idle(const struct dc *dc, bool allow_idle) |
| { |
| volatile const struct dmub_shared_state_ips_fw *ips_fw; |
| struct dc_dmub_srv *dc_dmub_srv; |
| union dmub_rb_cmd cmd = {0}; |
| |
| if (dc->debug.dmcub_emulation) |
| return; |
| |
| if (!dc->ctx->dmub_srv || !dc->ctx->dmub_srv->dmub) |
| return; |
| |
| dc_dmub_srv = dc->ctx->dmub_srv; |
| ips_fw = &dc_dmub_srv->dmub->shared_state[DMUB_SHARED_SHARE_FEATURE__IPS_FW].data.ips_fw; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.idle_opt_notify_idle.header.type = DMUB_CMD__IDLE_OPT; |
| cmd.idle_opt_notify_idle.header.sub_type = DMUB_CMD__IDLE_OPT_DCN_NOTIFY_IDLE; |
| cmd.idle_opt_notify_idle.header.payload_bytes = |
| sizeof(cmd.idle_opt_notify_idle) - |
| sizeof(cmd.idle_opt_notify_idle.header); |
| |
| cmd.idle_opt_notify_idle.cntl_data.driver_idle = allow_idle; |
| |
| if (dc->work_arounds.skip_psr_ips_crtc_disable) |
| cmd.idle_opt_notify_idle.cntl_data.skip_otg_disable = true; |
| |
| if (allow_idle) { |
| volatile struct dmub_shared_state_ips_driver *ips_driver = |
| &dc_dmub_srv->dmub->shared_state[DMUB_SHARED_SHARE_FEATURE__IPS_DRIVER].data.ips_driver; |
| union dmub_shared_state_ips_driver_signals new_signals; |
| |
| DC_LOG_IPS( |
| "%s wait idle (ips1_commit=%u ips2_commit=%u)", |
| __func__, |
| ips_fw->signals.bits.ips1_commit, |
| ips_fw->signals.bits.ips2_commit); |
| |
| dc_dmub_srv_wait_idle(dc->ctx->dmub_srv); |
| |
| memset(&new_signals, 0, sizeof(new_signals)); |
| |
| if (dc->config.disable_ips == DMUB_IPS_ENABLE || |
| dc->config.disable_ips == DMUB_IPS_DISABLE_DYNAMIC) { |
| new_signals.bits.allow_pg = 1; |
| new_signals.bits.allow_ips1 = 1; |
| new_signals.bits.allow_ips2 = 1; |
| new_signals.bits.allow_z10 = 1; |
| } else if (dc->config.disable_ips == DMUB_IPS_DISABLE_IPS1) { |
| new_signals.bits.allow_ips1 = 1; |
| } else if (dc->config.disable_ips == DMUB_IPS_DISABLE_IPS2) { |
| new_signals.bits.allow_pg = 1; |
| new_signals.bits.allow_ips1 = 1; |
| } else if (dc->config.disable_ips == DMUB_IPS_DISABLE_IPS2_Z10) { |
| new_signals.bits.allow_pg = 1; |
| new_signals.bits.allow_ips1 = 1; |
| new_signals.bits.allow_ips2 = 1; |
| } else if (dc->config.disable_ips == DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF) { |
| /* TODO: Move this logic out to hwseq */ |
| if (count_active_streams(dc) == 0) { |
| /* IPS2 - Display off */ |
| new_signals.bits.allow_pg = 1; |
| new_signals.bits.allow_ips1 = 1; |
| new_signals.bits.allow_ips2 = 1; |
| new_signals.bits.allow_z10 = 1; |
| } else { |
| /* RCG only */ |
| new_signals.bits.allow_pg = 0; |
| new_signals.bits.allow_ips1 = 1; |
| new_signals.bits.allow_ips2 = 0; |
| new_signals.bits.allow_z10 = 0; |
| } |
| } |
| |
| ips_driver->signals = new_signals; |
| dc_dmub_srv->driver_signals = ips_driver->signals; |
| } |
| |
| DC_LOG_IPS( |
| "%s send allow_idle=%d (ips1_commit=%u ips2_commit=%u)", |
| __func__, |
| allow_idle, |
| ips_fw->signals.bits.ips1_commit, |
| ips_fw->signals.bits.ips2_commit); |
| |
| /* NOTE: This does not use the "wake" interface since this is part of the wake path. */ |
| /* We also do not perform a wait since DMCUB could enter idle after the notification. */ |
| dm_execute_dmub_cmd(dc->ctx, &cmd, allow_idle ? DM_DMUB_WAIT_TYPE_NO_WAIT : DM_DMUB_WAIT_TYPE_WAIT); |
| |
| /* Register access should stop at this point. */ |
| if (allow_idle) |
| dc_dmub_srv->needs_idle_wake = true; |
| } |
| |
| static void dc_dmub_srv_exit_low_power_state(const struct dc *dc) |
| { |
| struct dc_dmub_srv *dc_dmub_srv; |
| uint32_t rcg_exit_count = 0, ips1_exit_count = 0, ips2_exit_count = 0; |
| |
| if (dc->debug.dmcub_emulation) |
| return; |
| |
| if (!dc->ctx->dmub_srv || !dc->ctx->dmub_srv->dmub) |
| return; |
| |
| dc_dmub_srv = dc->ctx->dmub_srv; |
| |
| if (dc->clk_mgr->funcs->exit_low_power_state) { |
| volatile const struct dmub_shared_state_ips_fw *ips_fw = |
| &dc_dmub_srv->dmub->shared_state[DMUB_SHARED_SHARE_FEATURE__IPS_FW].data.ips_fw; |
| volatile struct dmub_shared_state_ips_driver *ips_driver = |
| &dc_dmub_srv->dmub->shared_state[DMUB_SHARED_SHARE_FEATURE__IPS_DRIVER].data.ips_driver; |
| union dmub_shared_state_ips_driver_signals prev_driver_signals = ips_driver->signals; |
| |
| rcg_exit_count = ips_fw->rcg_exit_count; |
| ips1_exit_count = ips_fw->ips1_exit_count; |
| ips2_exit_count = ips_fw->ips2_exit_count; |
| |
| ips_driver->signals.all = 0; |
| dc_dmub_srv->driver_signals = ips_driver->signals; |
| |
| DC_LOG_IPS( |
| "%s (allow ips1=%u ips2=%u) (commit ips1=%u ips2=%u) (count rcg=%u ips1=%u ips2=%u)", |
| __func__, |
| ips_driver->signals.bits.allow_ips1, |
| ips_driver->signals.bits.allow_ips2, |
| ips_fw->signals.bits.ips1_commit, |
| ips_fw->signals.bits.ips2_commit, |
| ips_fw->rcg_entry_count, |
| ips_fw->ips1_entry_count, |
| ips_fw->ips2_entry_count); |
| |
| /* Note: register access has technically not resumed for DCN here, but we |
| * need to be message PMFW through our standard register interface. |
| */ |
| dc_dmub_srv->needs_idle_wake = false; |
| |
| if (prev_driver_signals.bits.allow_ips2 && |
| (!dc->debug.optimize_ips_handshake || |
| ips_fw->signals.bits.ips2_commit || !ips_fw->signals.bits.in_idle)) { |
| DC_LOG_IPS( |
| "wait IPS2 eval (ips1_commit=%u ips2_commit=%u)", |
| ips_fw->signals.bits.ips1_commit, |
| ips_fw->signals.bits.ips2_commit); |
| |
| if (!dc->debug.optimize_ips_handshake || !ips_fw->signals.bits.ips2_commit) |
| udelay(dc->debug.ips2_eval_delay_us); |
| |
| if (ips_fw->signals.bits.ips2_commit) { |
| DC_LOG_IPS( |
| "exit IPS2 #1 (ips1_commit=%u ips2_commit=%u)", |
| ips_fw->signals.bits.ips1_commit, |
| ips_fw->signals.bits.ips2_commit); |
| |
| // Tell PMFW to exit low power state |
| dc->clk_mgr->funcs->exit_low_power_state(dc->clk_mgr); |
| |
| DC_LOG_IPS( |
| "wait IPS2 entry delay (ips1_commit=%u ips2_commit=%u)", |
| ips_fw->signals.bits.ips1_commit, |
| ips_fw->signals.bits.ips2_commit); |
| |
| // Wait for IPS2 entry upper bound |
| udelay(dc->debug.ips2_entry_delay_us); |
| |
| DC_LOG_IPS( |
| "exit IPS2 #2 (ips1_commit=%u ips2_commit=%u)", |
| ips_fw->signals.bits.ips1_commit, |
| ips_fw->signals.bits.ips2_commit); |
| |
| dc->clk_mgr->funcs->exit_low_power_state(dc->clk_mgr); |
| |
| DC_LOG_IPS( |
| "wait IPS2 commit clear (ips1_commit=%u ips2_commit=%u)", |
| ips_fw->signals.bits.ips1_commit, |
| ips_fw->signals.bits.ips2_commit); |
| |
| while (ips_fw->signals.bits.ips2_commit) |
| udelay(1); |
| |
| DC_LOG_IPS( |
| "wait hw_pwr_up (ips1_commit=%u ips2_commit=%u)", |
| ips_fw->signals.bits.ips1_commit, |
| ips_fw->signals.bits.ips2_commit); |
| |
| if (!dc_dmub_srv_is_hw_pwr_up(dc->ctx->dmub_srv, true)) |
| ASSERT(0); |
| |
| DC_LOG_IPS( |
| "resync inbox1 (ips1_commit=%u ips2_commit=%u)", |
| ips_fw->signals.bits.ips1_commit, |
| ips_fw->signals.bits.ips2_commit); |
| |
| dmub_srv_sync_inbox1(dc->ctx->dmub_srv->dmub); |
| } |
| } |
| |
| dc_dmub_srv_notify_idle(dc, false); |
| if (prev_driver_signals.bits.allow_ips1) { |
| DC_LOG_IPS( |
| "wait for IPS1 commit clear (ips1_commit=%u ips2_commit=%u)", |
| ips_fw->signals.bits.ips1_commit, |
| ips_fw->signals.bits.ips2_commit); |
| |
| while (ips_fw->signals.bits.ips1_commit) |
| udelay(1); |
| |
| DC_LOG_IPS( |
| "wait for IPS1 commit clear done (ips1_commit=%u ips2_commit=%u)", |
| ips_fw->signals.bits.ips1_commit, |
| ips_fw->signals.bits.ips2_commit); |
| } |
| } |
| |
| if (!dc_dmub_srv_is_hw_pwr_up(dc->ctx->dmub_srv, true)) |
| ASSERT(0); |
| |
| DC_LOG_IPS("%s exit (count rcg=%u ips1=%u ips2=%u)", |
| __func__, |
| rcg_exit_count, |
| ips1_exit_count, |
| ips2_exit_count); |
| } |
| |
| void dc_dmub_srv_set_power_state(struct dc_dmub_srv *dc_dmub_srv, enum dc_acpi_cm_power_state power_state) |
| { |
| struct dmub_srv *dmub; |
| |
| if (!dc_dmub_srv) |
| return; |
| |
| dmub = dc_dmub_srv->dmub; |
| |
| if (power_state == DC_ACPI_CM_POWER_STATE_D0) |
| dmub_srv_set_power_state(dmub, DMUB_POWER_STATE_D0); |
| else |
| dmub_srv_set_power_state(dmub, DMUB_POWER_STATE_D3); |
| } |
| |
| void dc_dmub_srv_notify_fw_dc_power_state(struct dc_dmub_srv *dc_dmub_srv, |
| enum dc_acpi_cm_power_state power_state) |
| { |
| union dmub_rb_cmd cmd; |
| |
| if (!dc_dmub_srv) |
| return; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| |
| cmd.idle_opt_set_dc_power_state.header.type = DMUB_CMD__IDLE_OPT; |
| cmd.idle_opt_set_dc_power_state.header.sub_type = DMUB_CMD__IDLE_OPT_SET_DC_POWER_STATE; |
| cmd.idle_opt_set_dc_power_state.header.payload_bytes = |
| sizeof(cmd.idle_opt_set_dc_power_state) - sizeof(cmd.idle_opt_set_dc_power_state.header); |
| |
| if (power_state == DC_ACPI_CM_POWER_STATE_D0) { |
| cmd.idle_opt_set_dc_power_state.data.power_state = DMUB_IDLE_OPT_DC_POWER_STATE_D0; |
| } else if (power_state == DC_ACPI_CM_POWER_STATE_D3) { |
| cmd.idle_opt_set_dc_power_state.data.power_state = DMUB_IDLE_OPT_DC_POWER_STATE_D3; |
| } else { |
| cmd.idle_opt_set_dc_power_state.data.power_state = DMUB_IDLE_OPT_DC_POWER_STATE_UNKNOWN; |
| } |
| |
| dc_wake_and_execute_dmub_cmd(dc_dmub_srv->ctx, &cmd, DM_DMUB_WAIT_TYPE_WAIT); |
| } |
| |
| bool dc_dmub_srv_should_detect(struct dc_dmub_srv *dc_dmub_srv) |
| { |
| volatile const struct dmub_shared_state_ips_fw *ips_fw; |
| bool reallow_idle = false, should_detect = false; |
| |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub) |
| return false; |
| |
| if (dc_dmub_srv->dmub->shared_state && |
| dc_dmub_srv->dmub->meta_info.feature_bits.bits.shared_state_link_detection) { |
| ips_fw = &dc_dmub_srv->dmub->shared_state[DMUB_SHARED_SHARE_FEATURE__IPS_FW].data.ips_fw; |
| return ips_fw->signals.bits.detection_required; |
| } |
| |
| /* Detection may require reading scratch 0 - exit out of idle prior to the read. */ |
| if (dc_dmub_srv->idle_allowed) { |
| dc_dmub_srv_apply_idle_power_optimizations(dc_dmub_srv->ctx->dc, false); |
| reallow_idle = true; |
| } |
| |
| should_detect = dmub_srv_should_detect(dc_dmub_srv->dmub); |
| |
| /* Re-enter idle if we're not about to immediately redetect links. */ |
| if (!should_detect && reallow_idle && dc_dmub_srv->idle_exit_counter == 0 && |
| !dc_dmub_srv->ctx->dc->debug.disable_dmub_reallow_idle) |
| dc_dmub_srv_apply_idle_power_optimizations(dc_dmub_srv->ctx->dc, true); |
| |
| return should_detect; |
| } |
| |
| void dc_dmub_srv_apply_idle_power_optimizations(const struct dc *dc, bool allow_idle) |
| { |
| struct dc_dmub_srv *dc_dmub_srv = dc->ctx->dmub_srv; |
| |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub) |
| return; |
| |
| allow_idle &= (!dc->debug.ips_disallow_entry); |
| |
| if (dc_dmub_srv->idle_allowed == allow_idle) |
| return; |
| |
| DC_LOG_IPS("%s state change: old=%d new=%d", __func__, dc_dmub_srv->idle_allowed, allow_idle); |
| |
| /* |
| * Entering a low power state requires a driver notification. |
| * Powering up the hardware requires notifying PMFW and DMCUB. |
| * Clearing the driver idle allow requires a DMCUB command. |
| * DMCUB commands requires the DMCUB to be powered up and restored. |
| */ |
| |
| if (!allow_idle) { |
| dc_dmub_srv->idle_exit_counter += 1; |
| |
| dc_dmub_srv_exit_low_power_state(dc); |
| /* |
| * Idle is considered fully exited only after the sequence above |
| * fully completes. If we have a race of two threads exiting |
| * at the same time then it's safe to perform the sequence |
| * twice as long as we're not re-entering. |
| * |
| * Infinite command submission is avoided by using the |
| * dm_execute_dmub_cmd submission instead of the "wake" helpers. |
| */ |
| dc_dmub_srv->idle_allowed = false; |
| |
| dc_dmub_srv->idle_exit_counter -= 1; |
| if (dc_dmub_srv->idle_exit_counter < 0) { |
| ASSERT(0); |
| dc_dmub_srv->idle_exit_counter = 0; |
| } |
| } else { |
| /* Consider idle as notified prior to the actual submission to |
| * prevent multiple entries. */ |
| dc_dmub_srv->idle_allowed = true; |
| |
| dc_dmub_srv_notify_idle(dc, allow_idle); |
| } |
| } |
| |
| bool dc_wake_and_execute_dmub_cmd(const struct dc_context *ctx, union dmub_rb_cmd *cmd, |
| enum dm_dmub_wait_type wait_type) |
| { |
| return dc_wake_and_execute_dmub_cmd_list(ctx, 1, cmd, wait_type); |
| } |
| |
| bool dc_wake_and_execute_dmub_cmd_list(const struct dc_context *ctx, unsigned int count, |
| union dmub_rb_cmd *cmd, enum dm_dmub_wait_type wait_type) |
| { |
| struct dc_dmub_srv *dc_dmub_srv = ctx->dmub_srv; |
| bool result = false, reallow_idle = false; |
| |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub) |
| return false; |
| |
| if (count == 0) |
| return true; |
| |
| if (dc_dmub_srv->idle_allowed) { |
| dc_dmub_srv_apply_idle_power_optimizations(ctx->dc, false); |
| reallow_idle = true; |
| } |
| |
| /* |
| * These may have different implementations in DM, so ensure |
| * that we guide it to the expected helper. |
| */ |
| if (count > 1) |
| result = dm_execute_dmub_cmd_list(ctx, count, cmd, wait_type); |
| else |
| result = dm_execute_dmub_cmd(ctx, cmd, wait_type); |
| |
| if (result && reallow_idle && dc_dmub_srv->idle_exit_counter == 0 && |
| !ctx->dc->debug.disable_dmub_reallow_idle) |
| dc_dmub_srv_apply_idle_power_optimizations(ctx->dc, true); |
| |
| return result; |
| } |
| |
| static bool dc_dmub_execute_gpint(const struct dc_context *ctx, enum dmub_gpint_command command_code, |
| uint16_t param, uint32_t *response, enum dm_dmub_wait_type wait_type) |
| { |
| struct dc_dmub_srv *dc_dmub_srv = ctx->dmub_srv; |
| const uint32_t wait_us = wait_type == DM_DMUB_WAIT_TYPE_NO_WAIT ? 0 : 30; |
| enum dmub_status status; |
| |
| if (response) |
| *response = 0; |
| |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub) |
| return false; |
| |
| status = dmub_srv_send_gpint_command(dc_dmub_srv->dmub, command_code, param, wait_us); |
| if (status != DMUB_STATUS_OK) { |
| if (status == DMUB_STATUS_TIMEOUT && wait_type == DM_DMUB_WAIT_TYPE_NO_WAIT) |
| return true; |
| |
| return false; |
| } |
| |
| if (response && wait_type == DM_DMUB_WAIT_TYPE_WAIT_WITH_REPLY) |
| dmub_srv_get_gpint_response(dc_dmub_srv->dmub, response); |
| |
| return true; |
| } |
| |
| bool dc_wake_and_execute_gpint(const struct dc_context *ctx, enum dmub_gpint_command command_code, |
| uint16_t param, uint32_t *response, enum dm_dmub_wait_type wait_type) |
| { |
| struct dc_dmub_srv *dc_dmub_srv = ctx->dmub_srv; |
| bool result = false, reallow_idle = false; |
| |
| if (!dc_dmub_srv || !dc_dmub_srv->dmub) |
| return false; |
| |
| if (dc_dmub_srv->idle_allowed) { |
| dc_dmub_srv_apply_idle_power_optimizations(ctx->dc, false); |
| reallow_idle = true; |
| } |
| |
| result = dc_dmub_execute_gpint(ctx, command_code, param, response, wait_type); |
| |
| if (result && reallow_idle && dc_dmub_srv->idle_exit_counter == 0 && |
| !ctx->dc->debug.disable_dmub_reallow_idle) |
| dc_dmub_srv_apply_idle_power_optimizations(ctx->dc, true); |
| |
| return result; |
| } |
| |
| void dc_dmub_srv_fams2_update_config(struct dc *dc, |
| struct dc_state *context, |
| bool enable) |
| { |
| uint8_t num_cmds = 1; |
| uint32_t i; |
| union dmub_rb_cmd cmd[MAX_STREAMS + 1]; |
| struct dmub_rb_cmd_fams2 *global_cmd = &cmd[0].fams2_config; |
| |
| memset(cmd, 0, sizeof(union dmub_rb_cmd) * (MAX_STREAMS + 1)); |
| /* fill in generic command header */ |
| global_cmd->header.type = DMUB_CMD__FW_ASSISTED_MCLK_SWITCH; |
| global_cmd->header.sub_type = DMUB_CMD__FAMS2_CONFIG; |
| global_cmd->header.payload_bytes = sizeof(struct dmub_rb_cmd_fams2) - sizeof(struct dmub_cmd_header); |
| |
| if (enable) { |
| /* send global configuration parameters */ |
| memcpy(&global_cmd->config.global, &context->bw_ctx.bw.dcn.fams2_global_config, sizeof(struct dmub_cmd_fams2_global_config)); |
| |
| /* copy static feature configuration overrides */ |
| global_cmd->config.global.features.bits.enable_stall_recovery = dc->debug.fams2_config.bits.enable_stall_recovery; |
| global_cmd->config.global.features.bits.enable_debug = dc->debug.fams2_config.bits.enable_debug; |
| global_cmd->config.global.features.bits.enable_offload_flip = dc->debug.fams2_config.bits.enable_offload_flip; |
| |
| /* construct per-stream configs */ |
| for (i = 0; i < context->bw_ctx.bw.dcn.fams2_global_config.num_streams; i++) { |
| struct dmub_rb_cmd_fams2 *stream_cmd = &cmd[i+1].fams2_config; |
| |
| /* configure command header */ |
| stream_cmd->header.type = DMUB_CMD__FW_ASSISTED_MCLK_SWITCH; |
| stream_cmd->header.sub_type = DMUB_CMD__FAMS2_CONFIG; |
| stream_cmd->header.payload_bytes = sizeof(struct dmub_rb_cmd_fams2) - sizeof(struct dmub_cmd_header); |
| stream_cmd->header.multi_cmd_pending = 1; |
| /* copy stream static state */ |
| memcpy(&stream_cmd->config.stream, |
| &context->bw_ctx.bw.dcn.fams2_stream_params[i], |
| sizeof(struct dmub_fams2_stream_static_state)); |
| } |
| } |
| |
| /* apply feature configuration based on current driver state */ |
| global_cmd->config.global.features.bits.enable_visual_confirm = dc->debug.visual_confirm == VISUAL_CONFIRM_FAMS2; |
| global_cmd->config.global.features.bits.enable = enable; |
| |
| if (enable && context->bw_ctx.bw.dcn.fams2_global_config.features.bits.enable) { |
| /* set multi pending for global, and unset for last stream cmd */ |
| global_cmd->header.multi_cmd_pending = 1; |
| cmd[context->bw_ctx.bw.dcn.fams2_global_config.num_streams].fams2_config.header.multi_cmd_pending = 0; |
| num_cmds += context->bw_ctx.bw.dcn.fams2_global_config.num_streams; |
| } |
| |
| dm_execute_dmub_cmd_list(dc->ctx, num_cmds, cmd, DM_DMUB_WAIT_TYPE_WAIT); |
| } |
| |
| void dc_dmub_srv_fams2_drr_update(struct dc *dc, |
| uint32_t tg_inst, |
| uint32_t vtotal_min, |
| uint32_t vtotal_max, |
| uint32_t vtotal_mid, |
| uint32_t vtotal_mid_frame_num, |
| bool program_manual_trigger) |
| { |
| union dmub_rb_cmd cmd = { 0 }; |
| |
| cmd.fams2_drr_update.header.type = DMUB_CMD__FW_ASSISTED_MCLK_SWITCH; |
| cmd.fams2_drr_update.header.sub_type = DMUB_CMD__FAMS2_DRR_UPDATE; |
| cmd.fams2_drr_update.dmub_optc_state_req.tg_inst = tg_inst; |
| cmd.fams2_drr_update.dmub_optc_state_req.v_total_max = vtotal_max; |
| cmd.fams2_drr_update.dmub_optc_state_req.v_total_min = vtotal_min; |
| cmd.fams2_drr_update.dmub_optc_state_req.v_total_mid = vtotal_mid; |
| cmd.fams2_drr_update.dmub_optc_state_req.v_total_mid_frame_num = vtotal_mid_frame_num; |
| cmd.fams2_drr_update.dmub_optc_state_req.program_manual_trigger = program_manual_trigger; |
| |
| cmd.fams2_drr_update.header.payload_bytes = sizeof(cmd.fams2_drr_update) - sizeof(cmd.fams2_drr_update.header); |
| |
| dm_execute_dmub_cmd(dc->ctx, &cmd, DM_DMUB_WAIT_TYPE_WAIT); |
| } |
| |
| void dc_dmub_srv_fams2_passthrough_flip( |
| struct dc *dc, |
| struct dc_state *state, |
| struct dc_stream_state *stream, |
| struct dc_surface_update *srf_updates, |
| int surface_count) |
| { |
| int plane_index; |
| union dmub_rb_cmd cmds[MAX_PLANES]; |
| struct dc_plane_address *address; |
| struct dc_plane_state *plane_state; |
| int num_cmds = 0; |
| struct dc_stream_status *stream_status = dc_stream_get_status(stream); |
| |
| if (surface_count <= 0 || stream_status == NULL) |
| return; |
| |
| memset(cmds, 0, sizeof(union dmub_rb_cmd) * MAX_PLANES); |
| |
| /* build command for each surface update */ |
| for (plane_index = 0; plane_index < surface_count; plane_index++) { |
| plane_state = srf_updates[plane_index].surface; |
| address = &plane_state->address; |
| |
| /* skip if there is no address update for plane */ |
| if (!srf_updates[plane_index].flip_addr) |
| continue; |
| |
| /* build command header */ |
| cmds[num_cmds].fams2_flip.header.type = DMUB_CMD__FW_ASSISTED_MCLK_SWITCH; |
| cmds[num_cmds].fams2_flip.header.sub_type = DMUB_CMD__FAMS2_FLIP; |
| cmds[num_cmds].fams2_flip.header.payload_bytes = sizeof(struct dmub_rb_cmd_fams2_flip); |
| |
| /* for chaining multiple commands, all but last command should set to 1 */ |
| cmds[num_cmds].fams2_flip.header.multi_cmd_pending = 1; |
| |
| /* set topology info */ |
| cmds[num_cmds].fams2_flip.flip_info.pipe_mask = dc_plane_get_pipe_mask(state, plane_state); |
| if (stream_status) |
| cmds[num_cmds].fams2_flip.flip_info.otg_inst = stream_status->primary_otg_inst; |
| |
| cmds[num_cmds].fams2_flip.flip_info.config.bits.is_immediate = plane_state->flip_immediate; |
| |
| /* build address info for command */ |
| switch (address->type) { |
| case PLN_ADDR_TYPE_GRAPHICS: |
| if (address->grph.addr.quad_part == 0) { |
| BREAK_TO_DEBUGGER(); |
| break; |
| } |
| |
| cmds[num_cmds].fams2_flip.flip_info.addr_info.meta_addr_lo = |
| address->grph.meta_addr.low_part; |
| cmds[num_cmds].fams2_flip.flip_info.addr_info.meta_addr_hi = |
| (uint16_t)address->grph.meta_addr.high_part; |
| cmds[num_cmds].fams2_flip.flip_info.addr_info.surf_addr_lo = |
| address->grph.addr.low_part; |
| cmds[num_cmds].fams2_flip.flip_info.addr_info.surf_addr_hi = |
| (uint16_t)address->grph.addr.high_part; |
| break; |
| case PLN_ADDR_TYPE_VIDEO_PROGRESSIVE: |
| if (address->video_progressive.luma_addr.quad_part == 0 || |
| address->video_progressive.chroma_addr.quad_part == 0) { |
| BREAK_TO_DEBUGGER(); |
| break; |
| } |
| |
| cmds[num_cmds].fams2_flip.flip_info.addr_info.meta_addr_lo = |
| address->video_progressive.luma_meta_addr.low_part; |
| cmds[num_cmds].fams2_flip.flip_info.addr_info.meta_addr_hi = |
| (uint16_t)address->video_progressive.luma_meta_addr.high_part; |
| cmds[num_cmds].fams2_flip.flip_info.addr_info.meta_addr_c_lo = |
| address->video_progressive.chroma_meta_addr.low_part; |
| cmds[num_cmds].fams2_flip.flip_info.addr_info.meta_addr_c_hi = |
| (uint16_t)address->video_progressive.chroma_meta_addr.high_part; |
| cmds[num_cmds].fams2_flip.flip_info.addr_info.surf_addr_lo = |
| address->video_progressive.luma_addr.low_part; |
| cmds[num_cmds].fams2_flip.flip_info.addr_info.surf_addr_hi = |
| (uint16_t)address->video_progressive.luma_addr.high_part; |
| cmds[num_cmds].fams2_flip.flip_info.addr_info.surf_addr_c_lo = |
| address->video_progressive.chroma_addr.low_part; |
| cmds[num_cmds].fams2_flip.flip_info.addr_info.surf_addr_c_hi = |
| (uint16_t)address->video_progressive.chroma_addr.high_part; |
| break; |
| default: |
| // Should never be hit |
| BREAK_TO_DEBUGGER(); |
| break; |
| } |
| |
| num_cmds++; |
| } |
| |
| if (num_cmds > 0) { |
| cmds[num_cmds - 1].fams2_flip.header.multi_cmd_pending = 0; |
| dm_execute_dmub_cmd_list(dc->ctx, num_cmds, cmds, DM_DMUB_WAIT_TYPE_WAIT); |
| } |
| } |