| /* SPDX-License-Identifier: MIT */ |
| /* |
| * Copyright (C) 2017 Google, Inc. |
| * Copyright _ 2017-2019, Intel Corporation. |
| * |
| * Authors: |
| * Sean Paul <seanpaul@chromium.org> |
| * Ramalingam C <ramalingam.c@intel.com> |
| */ |
| |
| #include <linux/component.h> |
| #include <linux/i2c.h> |
| #include <linux/random.h> |
| |
| #include <drm/display/drm_hdcp_helper.h> |
| #include <drm/intel/i915_component.h> |
| |
| #include "i915_drv.h" |
| #include "i915_reg.h" |
| #include "intel_connector.h" |
| #include "intel_de.h" |
| #include "intel_display_power.h" |
| #include "intel_display_power_well.h" |
| #include "intel_display_types.h" |
| #include "intel_hdcp.h" |
| #include "intel_hdcp_gsc.h" |
| #include "intel_hdcp_regs.h" |
| #include "intel_pcode.h" |
| |
| #define KEY_LOAD_TRIES 5 |
| #define HDCP2_LC_RETRY_CNT 3 |
| |
| /* WA: 16022217614 */ |
| static void |
| intel_hdcp_disable_hdcp_line_rekeying(struct intel_encoder *encoder, |
| struct intel_hdcp *hdcp) |
| { |
| struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); |
| |
| /* Here we assume HDMI is in TMDS mode of operation */ |
| if (encoder->type != INTEL_OUTPUT_HDMI) |
| return; |
| |
| if (DISPLAY_VER(dev_priv) >= 14) { |
| if (IS_DISPLAY_VER_STEP(dev_priv, IP_VER(14, 0), STEP_D0, STEP_FOREVER)) |
| intel_de_rmw(dev_priv, MTL_CHICKEN_TRANS(hdcp->cpu_transcoder), |
| 0, HDCP_LINE_REKEY_DISABLE); |
| else if (IS_DISPLAY_VER_STEP(dev_priv, IP_VER(14, 1), STEP_B0, STEP_FOREVER) || |
| IS_DISPLAY_VER_STEP(dev_priv, IP_VER(20, 0), STEP_B0, STEP_FOREVER)) |
| intel_de_rmw(dev_priv, |
| TRANS_DDI_FUNC_CTL(dev_priv, hdcp->cpu_transcoder), |
| 0, TRANS_DDI_HDCP_LINE_REKEY_DISABLE); |
| } |
| } |
| |
| static int intel_conn_to_vcpi(struct intel_atomic_state *state, |
| struct intel_connector *connector) |
| { |
| struct drm_dp_mst_topology_mgr *mgr; |
| struct drm_dp_mst_atomic_payload *payload; |
| struct drm_dp_mst_topology_state *mst_state; |
| int vcpi = 0; |
| |
| /* For HDMI this is forced to be 0x0. For DP SST also this is 0x0. */ |
| if (!connector->port) |
| return 0; |
| mgr = connector->port->mgr; |
| |
| drm_modeset_lock(&mgr->base.lock, state->base.acquire_ctx); |
| mst_state = to_drm_dp_mst_topology_state(mgr->base.state); |
| payload = drm_atomic_get_mst_payload_state(mst_state, connector->port); |
| if (drm_WARN_ON(mgr->dev, !payload)) |
| goto out; |
| |
| vcpi = payload->vcpi; |
| if (drm_WARN_ON(mgr->dev, vcpi < 0)) { |
| vcpi = 0; |
| goto out; |
| } |
| out: |
| return vcpi; |
| } |
| |
| /* |
| * intel_hdcp_required_content_stream selects the most highest common possible HDCP |
| * content_type for all streams in DP MST topology because security f/w doesn't |
| * have any provision to mark content_type for each stream separately, it marks |
| * all available streams with the content_type proivided at the time of port |
| * authentication. This may prohibit the userspace to use type1 content on |
| * HDCP 2.2 capable sink because of other sink are not capable of HDCP 2.2 in |
| * DP MST topology. Though it is not compulsory, security fw should change its |
| * policy to mark different content_types for different streams. |
| */ |
| static int |
| intel_hdcp_required_content_stream(struct intel_atomic_state *state, |
| struct intel_digital_port *dig_port) |
| { |
| struct drm_connector_list_iter conn_iter; |
| struct intel_digital_port *conn_dig_port; |
| struct intel_connector *connector; |
| struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| bool enforce_type0 = false; |
| int k; |
| |
| if (dig_port->hdcp_auth_status) |
| return 0; |
| |
| data->k = 0; |
| |
| if (!dig_port->hdcp_mst_type1_capable) |
| enforce_type0 = true; |
| |
| drm_connector_list_iter_begin(&i915->drm, &conn_iter); |
| for_each_intel_connector_iter(connector, &conn_iter) { |
| if (connector->base.status == connector_status_disconnected) |
| continue; |
| |
| if (!intel_encoder_is_mst(intel_attached_encoder(connector))) |
| continue; |
| |
| conn_dig_port = intel_attached_dig_port(connector); |
| if (conn_dig_port != dig_port) |
| continue; |
| |
| data->streams[data->k].stream_id = |
| intel_conn_to_vcpi(state, connector); |
| data->k++; |
| |
| /* if there is only one active stream */ |
| if (dig_port->dp.active_mst_links <= 1) |
| break; |
| } |
| drm_connector_list_iter_end(&conn_iter); |
| |
| if (drm_WARN_ON(&i915->drm, data->k > INTEL_NUM_PIPES(i915) || data->k == 0)) |
| return -EINVAL; |
| |
| /* |
| * Apply common protection level across all streams in DP MST Topology. |
| * Use highest supported content type for all streams in DP MST Topology. |
| */ |
| for (k = 0; k < data->k; k++) |
| data->streams[k].stream_type = |
| enforce_type0 ? DRM_MODE_HDCP_CONTENT_TYPE0 : DRM_MODE_HDCP_CONTENT_TYPE1; |
| |
| return 0; |
| } |
| |
| static int intel_hdcp_prepare_streams(struct intel_atomic_state *state, |
| struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| |
| if (intel_encoder_is_mst(intel_attached_encoder(connector))) |
| return intel_hdcp_required_content_stream(state, dig_port); |
| |
| data->k = 1; |
| data->streams[0].stream_id = 0; |
| data->streams[0].stream_type = hdcp->content_type; |
| |
| return 0; |
| } |
| |
| static |
| bool intel_hdcp_is_ksv_valid(u8 *ksv) |
| { |
| int i, ones = 0; |
| /* KSV has 20 1's and 20 0's */ |
| for (i = 0; i < DRM_HDCP_KSV_LEN; i++) |
| ones += hweight8(ksv[i]); |
| if (ones != 20) |
| return false; |
| |
| return true; |
| } |
| |
| static |
| int intel_hdcp_read_valid_bksv(struct intel_digital_port *dig_port, |
| const struct intel_hdcp_shim *shim, u8 *bksv) |
| { |
| struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev); |
| int ret, i, tries = 2; |
| |
| /* HDCP spec states that we must retry the bksv if it is invalid */ |
| for (i = 0; i < tries; i++) { |
| ret = shim->read_bksv(dig_port, bksv); |
| if (ret) |
| return ret; |
| if (intel_hdcp_is_ksv_valid(bksv)) |
| break; |
| } |
| if (i == tries) { |
| drm_dbg_kms(&i915->drm, "Bksv is invalid\n"); |
| return -ENODEV; |
| } |
| |
| return 0; |
| } |
| |
| /* Is HDCP1.4 capable on Platform and Sink */ |
| bool intel_hdcp_get_capability(struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port; |
| const struct intel_hdcp_shim *shim = connector->hdcp.shim; |
| bool capable = false; |
| u8 bksv[5]; |
| |
| if (!intel_attached_encoder(connector)) |
| return capable; |
| |
| dig_port = intel_attached_dig_port(connector); |
| |
| if (!shim) |
| return capable; |
| |
| if (shim->hdcp_get_capability) { |
| shim->hdcp_get_capability(dig_port, &capable); |
| } else { |
| if (!intel_hdcp_read_valid_bksv(dig_port, shim, bksv)) |
| capable = true; |
| } |
| |
| return capable; |
| } |
| |
| /* |
| * Check if the source has all the building blocks ready to make |
| * HDCP 2.2 work |
| */ |
| static bool intel_hdcp2_prerequisite(struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| |
| /* I915 support for HDCP2.2 */ |
| if (!hdcp->hdcp2_supported) |
| return false; |
| |
| /* If MTL+ make sure gsc is loaded and proxy is setup */ |
| if (intel_hdcp_gsc_cs_required(i915)) { |
| if (!intel_hdcp_gsc_check_status(i915)) |
| return false; |
| } |
| |
| /* MEI/GSC interface is solid depending on which is used */ |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| if (!i915->display.hdcp.comp_added || !i915->display.hdcp.arbiter) { |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| return false; |
| } |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| |
| return true; |
| } |
| |
| /* Is HDCP2.2 capable on Platform and Sink */ |
| bool intel_hdcp2_get_capability(struct intel_connector *connector) |
| { |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| bool capable = false; |
| |
| if (!intel_hdcp2_prerequisite(connector)) |
| return false; |
| |
| /* Sink's capability for HDCP2.2 */ |
| hdcp->shim->hdcp_2_2_get_capability(connector, &capable); |
| |
| return capable; |
| } |
| |
| void intel_hdcp_get_remote_capability(struct intel_connector *connector, |
| bool *hdcp_capable, |
| bool *hdcp2_capable) |
| { |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| |
| if (!hdcp->shim->get_remote_hdcp_capability) |
| return; |
| |
| hdcp->shim->get_remote_hdcp_capability(connector, hdcp_capable, |
| hdcp2_capable); |
| |
| if (!intel_hdcp2_prerequisite(connector)) |
| *hdcp2_capable = false; |
| } |
| |
| static bool intel_hdcp_in_use(struct drm_i915_private *i915, |
| enum transcoder cpu_transcoder, enum port port) |
| { |
| return intel_de_read(i915, |
| HDCP_STATUS(i915, cpu_transcoder, port)) & |
| HDCP_STATUS_ENC; |
| } |
| |
| static bool intel_hdcp2_in_use(struct drm_i915_private *i915, |
| enum transcoder cpu_transcoder, enum port port) |
| { |
| return intel_de_read(i915, |
| HDCP2_STATUS(i915, cpu_transcoder, port)) & |
| LINK_ENCRYPTION_STATUS; |
| } |
| |
| static int intel_hdcp_poll_ksv_fifo(struct intel_digital_port *dig_port, |
| const struct intel_hdcp_shim *shim) |
| { |
| int ret, read_ret; |
| bool ksv_ready; |
| |
| /* Poll for ksv list ready (spec says max time allowed is 5s) */ |
| ret = __wait_for(read_ret = shim->read_ksv_ready(dig_port, |
| &ksv_ready), |
| read_ret || ksv_ready, 5 * 1000 * 1000, 1000, |
| 100 * 1000); |
| if (ret) |
| return ret; |
| if (read_ret) |
| return read_ret; |
| if (!ksv_ready) |
| return -ETIMEDOUT; |
| |
| return 0; |
| } |
| |
| static bool hdcp_key_loadable(struct drm_i915_private *i915) |
| { |
| enum i915_power_well_id id; |
| intel_wakeref_t wakeref; |
| bool enabled = false; |
| |
| /* |
| * On HSW and BDW, Display HW loads the Key as soon as Display resumes. |
| * On all BXT+, SW can load the keys only when the PW#1 is turned on. |
| */ |
| if (IS_HASWELL(i915) || IS_BROADWELL(i915)) |
| id = HSW_DISP_PW_GLOBAL; |
| else |
| id = SKL_DISP_PW_1; |
| |
| /* PG1 (power well #1) needs to be enabled */ |
| with_intel_runtime_pm(&i915->runtime_pm, wakeref) |
| enabled = intel_display_power_well_is_enabled(i915, id); |
| |
| /* |
| * Another req for hdcp key loadability is enabled state of pll for |
| * cdclk. Without active crtc we wont land here. So we are assuming that |
| * cdclk is already on. |
| */ |
| |
| return enabled; |
| } |
| |
| static void intel_hdcp_clear_keys(struct drm_i915_private *i915) |
| { |
| intel_de_write(i915, HDCP_KEY_CONF, HDCP_CLEAR_KEYS_TRIGGER); |
| intel_de_write(i915, HDCP_KEY_STATUS, |
| HDCP_KEY_LOAD_DONE | HDCP_KEY_LOAD_STATUS | HDCP_FUSE_IN_PROGRESS | HDCP_FUSE_ERROR | HDCP_FUSE_DONE); |
| } |
| |
| static int intel_hdcp_load_keys(struct drm_i915_private *i915) |
| { |
| int ret; |
| u32 val; |
| |
| val = intel_de_read(i915, HDCP_KEY_STATUS); |
| if ((val & HDCP_KEY_LOAD_DONE) && (val & HDCP_KEY_LOAD_STATUS)) |
| return 0; |
| |
| /* |
| * On HSW and BDW HW loads the HDCP1.4 Key when Display comes |
| * out of reset. So if Key is not already loaded, its an error state. |
| */ |
| if (IS_HASWELL(i915) || IS_BROADWELL(i915)) |
| if (!(intel_de_read(i915, HDCP_KEY_STATUS) & HDCP_KEY_LOAD_DONE)) |
| return -ENXIO; |
| |
| /* |
| * Initiate loading the HDCP key from fuses. |
| * |
| * BXT+ platforms, HDCP key needs to be loaded by SW. Only display |
| * version 9 platforms (minus BXT) differ in the key load trigger |
| * process from other platforms. These platforms use the GT Driver |
| * Mailbox interface. |
| */ |
| if (DISPLAY_VER(i915) == 9 && !IS_BROXTON(i915)) { |
| ret = snb_pcode_write(&i915->uncore, SKL_PCODE_LOAD_HDCP_KEYS, 1); |
| if (ret) { |
| drm_err(&i915->drm, |
| "Failed to initiate HDCP key load (%d)\n", |
| ret); |
| return ret; |
| } |
| } else { |
| intel_de_write(i915, HDCP_KEY_CONF, HDCP_KEY_LOAD_TRIGGER); |
| } |
| |
| /* Wait for the keys to load (500us) */ |
| ret = intel_de_wait_custom(i915, HDCP_KEY_STATUS, |
| HDCP_KEY_LOAD_DONE, HDCP_KEY_LOAD_DONE, |
| 10, 1, &val); |
| if (ret) |
| return ret; |
| else if (!(val & HDCP_KEY_LOAD_STATUS)) |
| return -ENXIO; |
| |
| /* Send Aksv over to PCH display for use in authentication */ |
| intel_de_write(i915, HDCP_KEY_CONF, HDCP_AKSV_SEND_TRIGGER); |
| |
| return 0; |
| } |
| |
| /* Returns updated SHA-1 index */ |
| static int intel_write_sha_text(struct drm_i915_private *i915, u32 sha_text) |
| { |
| intel_de_write(i915, HDCP_SHA_TEXT, sha_text); |
| if (intel_de_wait_for_set(i915, HDCP_REP_CTL, HDCP_SHA1_READY, 1)) { |
| drm_err(&i915->drm, "Timed out waiting for SHA1 ready\n"); |
| return -ETIMEDOUT; |
| } |
| return 0; |
| } |
| |
| static |
| u32 intel_hdcp_get_repeater_ctl(struct drm_i915_private *i915, |
| enum transcoder cpu_transcoder, enum port port) |
| { |
| if (DISPLAY_VER(i915) >= 12) { |
| switch (cpu_transcoder) { |
| case TRANSCODER_A: |
| return HDCP_TRANSA_REP_PRESENT | |
| HDCP_TRANSA_SHA1_M0; |
| case TRANSCODER_B: |
| return HDCP_TRANSB_REP_PRESENT | |
| HDCP_TRANSB_SHA1_M0; |
| case TRANSCODER_C: |
| return HDCP_TRANSC_REP_PRESENT | |
| HDCP_TRANSC_SHA1_M0; |
| case TRANSCODER_D: |
| return HDCP_TRANSD_REP_PRESENT | |
| HDCP_TRANSD_SHA1_M0; |
| default: |
| drm_err(&i915->drm, "Unknown transcoder %d\n", |
| cpu_transcoder); |
| return 0; |
| } |
| } |
| |
| switch (port) { |
| case PORT_A: |
| return HDCP_DDIA_REP_PRESENT | HDCP_DDIA_SHA1_M0; |
| case PORT_B: |
| return HDCP_DDIB_REP_PRESENT | HDCP_DDIB_SHA1_M0; |
| case PORT_C: |
| return HDCP_DDIC_REP_PRESENT | HDCP_DDIC_SHA1_M0; |
| case PORT_D: |
| return HDCP_DDID_REP_PRESENT | HDCP_DDID_SHA1_M0; |
| case PORT_E: |
| return HDCP_DDIE_REP_PRESENT | HDCP_DDIE_SHA1_M0; |
| default: |
| drm_err(&i915->drm, "Unknown port %d\n", port); |
| return 0; |
| } |
| } |
| |
| static |
| int intel_hdcp_validate_v_prime(struct intel_connector *connector, |
| const struct intel_hdcp_shim *shim, |
| u8 *ksv_fifo, u8 num_downstream, u8 *bstatus) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| enum transcoder cpu_transcoder = connector->hdcp.cpu_transcoder; |
| enum port port = dig_port->base.port; |
| u32 vprime, sha_text, sha_leftovers, rep_ctl; |
| int ret, i, j, sha_idx; |
| |
| /* Process V' values from the receiver */ |
| for (i = 0; i < DRM_HDCP_V_PRIME_NUM_PARTS; i++) { |
| ret = shim->read_v_prime_part(dig_port, i, &vprime); |
| if (ret) |
| return ret; |
| intel_de_write(i915, HDCP_SHA_V_PRIME(i), vprime); |
| } |
| |
| /* |
| * We need to write the concatenation of all device KSVs, BINFO (DP) || |
| * BSTATUS (HDMI), and M0 (which is added via HDCP_REP_CTL). This byte |
| * stream is written via the HDCP_SHA_TEXT register in 32-bit |
| * increments. Every 64 bytes, we need to write HDCP_REP_CTL again. This |
| * index will keep track of our progress through the 64 bytes as well as |
| * helping us work the 40-bit KSVs through our 32-bit register. |
| * |
| * NOTE: data passed via HDCP_SHA_TEXT should be big-endian |
| */ |
| sha_idx = 0; |
| sha_text = 0; |
| sha_leftovers = 0; |
| rep_ctl = intel_hdcp_get_repeater_ctl(i915, cpu_transcoder, port); |
| intel_de_write(i915, HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32); |
| for (i = 0; i < num_downstream; i++) { |
| unsigned int sha_empty; |
| u8 *ksv = &ksv_fifo[i * DRM_HDCP_KSV_LEN]; |
| |
| /* Fill up the empty slots in sha_text and write it out */ |
| sha_empty = sizeof(sha_text) - sha_leftovers; |
| for (j = 0; j < sha_empty; j++) { |
| u8 off = ((sizeof(sha_text) - j - 1 - sha_leftovers) * 8); |
| sha_text |= ksv[j] << off; |
| } |
| |
| ret = intel_write_sha_text(i915, sha_text); |
| if (ret < 0) |
| return ret; |
| |
| /* Programming guide writes this every 64 bytes */ |
| sha_idx += sizeof(sha_text); |
| if (!(sha_idx % 64)) |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_TEXT_32); |
| |
| /* Store the leftover bytes from the ksv in sha_text */ |
| sha_leftovers = DRM_HDCP_KSV_LEN - sha_empty; |
| sha_text = 0; |
| for (j = 0; j < sha_leftovers; j++) |
| sha_text |= ksv[sha_empty + j] << |
| ((sizeof(sha_text) - j - 1) * 8); |
| |
| /* |
| * If we still have room in sha_text for more data, continue. |
| * Otherwise, write it out immediately. |
| */ |
| if (sizeof(sha_text) > sha_leftovers) |
| continue; |
| |
| ret = intel_write_sha_text(i915, sha_text); |
| if (ret < 0) |
| return ret; |
| sha_leftovers = 0; |
| sha_text = 0; |
| sha_idx += sizeof(sha_text); |
| } |
| |
| /* |
| * We need to write BINFO/BSTATUS, and M0 now. Depending on how many |
| * bytes are leftover from the last ksv, we might be able to fit them |
| * all in sha_text (first 2 cases), or we might need to split them up |
| * into 2 writes (last 2 cases). |
| */ |
| if (sha_leftovers == 0) { |
| /* Write 16 bits of text, 16 bits of M0 */ |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_TEXT_16); |
| ret = intel_write_sha_text(i915, |
| bstatus[0] << 8 | bstatus[1]); |
| if (ret < 0) |
| return ret; |
| sha_idx += sizeof(sha_text); |
| |
| /* Write 32 bits of M0 */ |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_TEXT_0); |
| ret = intel_write_sha_text(i915, 0); |
| if (ret < 0) |
| return ret; |
| sha_idx += sizeof(sha_text); |
| |
| /* Write 16 bits of M0 */ |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_TEXT_16); |
| ret = intel_write_sha_text(i915, 0); |
| if (ret < 0) |
| return ret; |
| sha_idx += sizeof(sha_text); |
| |
| } else if (sha_leftovers == 1) { |
| /* Write 24 bits of text, 8 bits of M0 */ |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_TEXT_24); |
| sha_text |= bstatus[0] << 16 | bstatus[1] << 8; |
| /* Only 24-bits of data, must be in the LSB */ |
| sha_text = (sha_text & 0xffffff00) >> 8; |
| ret = intel_write_sha_text(i915, sha_text); |
| if (ret < 0) |
| return ret; |
| sha_idx += sizeof(sha_text); |
| |
| /* Write 32 bits of M0 */ |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_TEXT_0); |
| ret = intel_write_sha_text(i915, 0); |
| if (ret < 0) |
| return ret; |
| sha_idx += sizeof(sha_text); |
| |
| /* Write 24 bits of M0 */ |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_TEXT_8); |
| ret = intel_write_sha_text(i915, 0); |
| if (ret < 0) |
| return ret; |
| sha_idx += sizeof(sha_text); |
| |
| } else if (sha_leftovers == 2) { |
| /* Write 32 bits of text */ |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_TEXT_32); |
| sha_text |= bstatus[0] << 8 | bstatus[1]; |
| ret = intel_write_sha_text(i915, sha_text); |
| if (ret < 0) |
| return ret; |
| sha_idx += sizeof(sha_text); |
| |
| /* Write 64 bits of M0 */ |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_TEXT_0); |
| for (i = 0; i < 2; i++) { |
| ret = intel_write_sha_text(i915, 0); |
| if (ret < 0) |
| return ret; |
| sha_idx += sizeof(sha_text); |
| } |
| |
| /* |
| * Terminate the SHA-1 stream by hand. For the other leftover |
| * cases this is appended by the hardware. |
| */ |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_TEXT_32); |
| sha_text = DRM_HDCP_SHA1_TERMINATOR << 24; |
| ret = intel_write_sha_text(i915, sha_text); |
| if (ret < 0) |
| return ret; |
| sha_idx += sizeof(sha_text); |
| } else if (sha_leftovers == 3) { |
| /* Write 32 bits of text (filled from LSB) */ |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_TEXT_32); |
| sha_text |= bstatus[0]; |
| ret = intel_write_sha_text(i915, sha_text); |
| if (ret < 0) |
| return ret; |
| sha_idx += sizeof(sha_text); |
| |
| /* Write 8 bits of text (filled from LSB), 24 bits of M0 */ |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_TEXT_8); |
| ret = intel_write_sha_text(i915, bstatus[1]); |
| if (ret < 0) |
| return ret; |
| sha_idx += sizeof(sha_text); |
| |
| /* Write 32 bits of M0 */ |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_TEXT_0); |
| ret = intel_write_sha_text(i915, 0); |
| if (ret < 0) |
| return ret; |
| sha_idx += sizeof(sha_text); |
| |
| /* Write 8 bits of M0 */ |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_TEXT_24); |
| ret = intel_write_sha_text(i915, 0); |
| if (ret < 0) |
| return ret; |
| sha_idx += sizeof(sha_text); |
| } else { |
| drm_dbg_kms(&i915->drm, "Invalid number of leftovers %d\n", |
| sha_leftovers); |
| return -EINVAL; |
| } |
| |
| intel_de_write(i915, HDCP_REP_CTL, rep_ctl | HDCP_SHA1_TEXT_32); |
| /* Fill up to 64-4 bytes with zeros (leave the last write for length) */ |
| while ((sha_idx % 64) < (64 - sizeof(sha_text))) { |
| ret = intel_write_sha_text(i915, 0); |
| if (ret < 0) |
| return ret; |
| sha_idx += sizeof(sha_text); |
| } |
| |
| /* |
| * Last write gets the length of the concatenation in bits. That is: |
| * - 5 bytes per device |
| * - 10 bytes for BINFO/BSTATUS(2), M0(8) |
| */ |
| sha_text = (num_downstream * 5 + 10) * 8; |
| ret = intel_write_sha_text(i915, sha_text); |
| if (ret < 0) |
| return ret; |
| |
| /* Tell the HW we're done with the hash and wait for it to ACK */ |
| intel_de_write(i915, HDCP_REP_CTL, |
| rep_ctl | HDCP_SHA1_COMPLETE_HASH); |
| if (intel_de_wait_for_set(i915, HDCP_REP_CTL, |
| HDCP_SHA1_COMPLETE, 1)) { |
| drm_err(&i915->drm, "Timed out waiting for SHA1 complete\n"); |
| return -ETIMEDOUT; |
| } |
| if (!(intel_de_read(i915, HDCP_REP_CTL) & HDCP_SHA1_V_MATCH)) { |
| drm_dbg_kms(&i915->drm, "SHA-1 mismatch, HDCP failed\n"); |
| return -ENXIO; |
| } |
| |
| return 0; |
| } |
| |
| /* Implements Part 2 of the HDCP authorization procedure */ |
| static |
| int intel_hdcp_auth_downstream(struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| const struct intel_hdcp_shim *shim = connector->hdcp.shim; |
| u8 bstatus[2], num_downstream, *ksv_fifo; |
| int ret, i, tries = 3; |
| |
| ret = intel_hdcp_poll_ksv_fifo(dig_port, shim); |
| if (ret) { |
| drm_dbg_kms(&i915->drm, |
| "KSV list failed to become ready (%d)\n", ret); |
| return ret; |
| } |
| |
| ret = shim->read_bstatus(dig_port, bstatus); |
| if (ret) |
| return ret; |
| |
| if (DRM_HDCP_MAX_DEVICE_EXCEEDED(bstatus[0]) || |
| DRM_HDCP_MAX_CASCADE_EXCEEDED(bstatus[1])) { |
| drm_dbg_kms(&i915->drm, "Max Topology Limit Exceeded\n"); |
| return -EPERM; |
| } |
| |
| /* |
| * When repeater reports 0 device count, HDCP1.4 spec allows disabling |
| * the HDCP encryption. That implies that repeater can't have its own |
| * display. As there is no consumption of encrypted content in the |
| * repeater with 0 downstream devices, we are failing the |
| * authentication. |
| */ |
| num_downstream = DRM_HDCP_NUM_DOWNSTREAM(bstatus[0]); |
| if (num_downstream == 0) { |
| drm_dbg_kms(&i915->drm, |
| "Repeater with zero downstream devices\n"); |
| return -EINVAL; |
| } |
| |
| ksv_fifo = kcalloc(DRM_HDCP_KSV_LEN, num_downstream, GFP_KERNEL); |
| if (!ksv_fifo) { |
| drm_dbg_kms(&i915->drm, "Out of mem: ksv_fifo\n"); |
| return -ENOMEM; |
| } |
| |
| ret = shim->read_ksv_fifo(dig_port, num_downstream, ksv_fifo); |
| if (ret) |
| goto err; |
| |
| if (drm_hdcp_check_ksvs_revoked(&i915->drm, ksv_fifo, |
| num_downstream) > 0) { |
| drm_err(&i915->drm, "Revoked Ksv(s) in ksv_fifo\n"); |
| ret = -EPERM; |
| goto err; |
| } |
| |
| /* |
| * When V prime mismatches, DP Spec mandates re-read of |
| * V prime atleast twice. |
| */ |
| for (i = 0; i < tries; i++) { |
| ret = intel_hdcp_validate_v_prime(connector, shim, |
| ksv_fifo, num_downstream, |
| bstatus); |
| if (!ret) |
| break; |
| } |
| |
| if (i == tries) { |
| drm_dbg_kms(&i915->drm, |
| "V Prime validation failed.(%d)\n", ret); |
| goto err; |
| } |
| |
| drm_dbg_kms(&i915->drm, "HDCP is enabled (%d downstream devices)\n", |
| num_downstream); |
| ret = 0; |
| err: |
| kfree(ksv_fifo); |
| return ret; |
| } |
| |
| /* Implements Part 1 of the HDCP authorization procedure */ |
| static int intel_hdcp_auth(struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| const struct intel_hdcp_shim *shim = hdcp->shim; |
| enum transcoder cpu_transcoder = connector->hdcp.cpu_transcoder; |
| enum port port = dig_port->base.port; |
| unsigned long r0_prime_gen_start; |
| int ret, i, tries = 2; |
| union { |
| u32 reg[2]; |
| u8 shim[DRM_HDCP_AN_LEN]; |
| } an; |
| union { |
| u32 reg[2]; |
| u8 shim[DRM_HDCP_KSV_LEN]; |
| } bksv; |
| union { |
| u32 reg; |
| u8 shim[DRM_HDCP_RI_LEN]; |
| } ri; |
| bool repeater_present, hdcp_capable; |
| |
| /* |
| * Detects whether the display is HDCP capable. Although we check for |
| * valid Bksv below, the HDCP over DP spec requires that we check |
| * whether the display supports HDCP before we write An. For HDMI |
| * displays, this is not necessary. |
| */ |
| if (shim->hdcp_get_capability) { |
| ret = shim->hdcp_get_capability(dig_port, &hdcp_capable); |
| if (ret) |
| return ret; |
| if (!hdcp_capable) { |
| drm_dbg_kms(&i915->drm, |
| "Panel is not HDCP capable\n"); |
| return -EINVAL; |
| } |
| } |
| |
| /* Initialize An with 2 random values and acquire it */ |
| for (i = 0; i < 2; i++) |
| intel_de_write(i915, |
| HDCP_ANINIT(i915, cpu_transcoder, port), |
| get_random_u32()); |
| intel_de_write(i915, HDCP_CONF(i915, cpu_transcoder, port), |
| HDCP_CONF_CAPTURE_AN); |
| |
| /* Wait for An to be acquired */ |
| if (intel_de_wait_for_set(i915, |
| HDCP_STATUS(i915, cpu_transcoder, port), |
| HDCP_STATUS_AN_READY, 1)) { |
| drm_err(&i915->drm, "Timed out waiting for An\n"); |
| return -ETIMEDOUT; |
| } |
| |
| an.reg[0] = intel_de_read(i915, |
| HDCP_ANLO(i915, cpu_transcoder, port)); |
| an.reg[1] = intel_de_read(i915, |
| HDCP_ANHI(i915, cpu_transcoder, port)); |
| ret = shim->write_an_aksv(dig_port, an.shim); |
| if (ret) |
| return ret; |
| |
| r0_prime_gen_start = jiffies; |
| |
| memset(&bksv, 0, sizeof(bksv)); |
| |
| ret = intel_hdcp_read_valid_bksv(dig_port, shim, bksv.shim); |
| if (ret < 0) |
| return ret; |
| |
| if (drm_hdcp_check_ksvs_revoked(&i915->drm, bksv.shim, 1) > 0) { |
| drm_err(&i915->drm, "BKSV is revoked\n"); |
| return -EPERM; |
| } |
| |
| intel_de_write(i915, HDCP_BKSVLO(i915, cpu_transcoder, port), |
| bksv.reg[0]); |
| intel_de_write(i915, HDCP_BKSVHI(i915, cpu_transcoder, port), |
| bksv.reg[1]); |
| |
| ret = shim->repeater_present(dig_port, &repeater_present); |
| if (ret) |
| return ret; |
| if (repeater_present) |
| intel_de_write(i915, HDCP_REP_CTL, |
| intel_hdcp_get_repeater_ctl(i915, cpu_transcoder, port)); |
| |
| ret = shim->toggle_signalling(dig_port, cpu_transcoder, true); |
| if (ret) |
| return ret; |
| |
| intel_de_write(i915, HDCP_CONF(i915, cpu_transcoder, port), |
| HDCP_CONF_AUTH_AND_ENC); |
| |
| /* Wait for R0 ready */ |
| if (wait_for(intel_de_read(i915, HDCP_STATUS(i915, cpu_transcoder, port)) & |
| (HDCP_STATUS_R0_READY | HDCP_STATUS_ENC), 1)) { |
| drm_err(&i915->drm, "Timed out waiting for R0 ready\n"); |
| return -ETIMEDOUT; |
| } |
| |
| /* |
| * Wait for R0' to become available. The spec says 100ms from Aksv, but |
| * some monitors can take longer than this. We'll set the timeout at |
| * 300ms just to be sure. |
| * |
| * On DP, there's an R0_READY bit available but no such bit |
| * exists on HDMI. Since the upper-bound is the same, we'll just do |
| * the stupid thing instead of polling on one and not the other. |
| */ |
| wait_remaining_ms_from_jiffies(r0_prime_gen_start, 300); |
| |
| tries = 3; |
| |
| /* |
| * DP HDCP Spec mandates the two more reattempt to read R0, incase |
| * of R0 mismatch. |
| */ |
| for (i = 0; i < tries; i++) { |
| ri.reg = 0; |
| ret = shim->read_ri_prime(dig_port, ri.shim); |
| if (ret) |
| return ret; |
| intel_de_write(i915, |
| HDCP_RPRIME(i915, cpu_transcoder, port), |
| ri.reg); |
| |
| /* Wait for Ri prime match */ |
| if (!wait_for(intel_de_read(i915, HDCP_STATUS(i915, cpu_transcoder, port)) & |
| (HDCP_STATUS_RI_MATCH | HDCP_STATUS_ENC), 1)) |
| break; |
| } |
| |
| if (i == tries) { |
| drm_dbg_kms(&i915->drm, |
| "Timed out waiting for Ri prime match (%x)\n", |
| intel_de_read(i915, |
| HDCP_STATUS(i915, cpu_transcoder, port))); |
| return -ETIMEDOUT; |
| } |
| |
| /* Wait for encryption confirmation */ |
| if (intel_de_wait_for_set(i915, |
| HDCP_STATUS(i915, cpu_transcoder, port), |
| HDCP_STATUS_ENC, |
| HDCP_ENCRYPT_STATUS_CHANGE_TIMEOUT_MS)) { |
| drm_err(&i915->drm, "Timed out waiting for encryption\n"); |
| return -ETIMEDOUT; |
| } |
| |
| /* DP MST Auth Part 1 Step 2.a and Step 2.b */ |
| if (shim->stream_encryption) { |
| ret = shim->stream_encryption(connector, true); |
| if (ret) { |
| drm_err(&i915->drm, "[CONNECTOR:%d:%s] Failed to enable HDCP 1.4 stream enc\n", |
| connector->base.base.id, connector->base.name); |
| return ret; |
| } |
| drm_dbg_kms(&i915->drm, "HDCP 1.4 transcoder: %s stream encrypted\n", |
| transcoder_name(hdcp->stream_transcoder)); |
| } |
| |
| if (repeater_present) |
| return intel_hdcp_auth_downstream(connector); |
| |
| drm_dbg_kms(&i915->drm, "HDCP is enabled (no repeater present)\n"); |
| return 0; |
| } |
| |
| static int _intel_hdcp_disable(struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| enum port port = dig_port->base.port; |
| enum transcoder cpu_transcoder = hdcp->cpu_transcoder; |
| u32 repeater_ctl; |
| int ret; |
| |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] HDCP is being disabled...\n", |
| connector->base.base.id, connector->base.name); |
| |
| if (hdcp->shim->stream_encryption) { |
| ret = hdcp->shim->stream_encryption(connector, false); |
| if (ret) { |
| drm_err(&i915->drm, "[CONNECTOR:%d:%s] Failed to disable HDCP 1.4 stream enc\n", |
| connector->base.base.id, connector->base.name); |
| return ret; |
| } |
| drm_dbg_kms(&i915->drm, "HDCP 1.4 transcoder: %s stream encryption disabled\n", |
| transcoder_name(hdcp->stream_transcoder)); |
| /* |
| * If there are other connectors on this port using HDCP, |
| * don't disable it until it disabled HDCP encryption for |
| * all connectors in MST topology. |
| */ |
| if (dig_port->num_hdcp_streams > 0) |
| return 0; |
| } |
| |
| hdcp->hdcp_encrypted = false; |
| intel_de_write(i915, HDCP_CONF(i915, cpu_transcoder, port), 0); |
| if (intel_de_wait_for_clear(i915, |
| HDCP_STATUS(i915, cpu_transcoder, port), |
| ~0, HDCP_ENCRYPT_STATUS_CHANGE_TIMEOUT_MS)) { |
| drm_err(&i915->drm, |
| "Failed to disable HDCP, timeout clearing status\n"); |
| return -ETIMEDOUT; |
| } |
| |
| repeater_ctl = intel_hdcp_get_repeater_ctl(i915, cpu_transcoder, |
| port); |
| intel_de_rmw(i915, HDCP_REP_CTL, repeater_ctl, 0); |
| |
| ret = hdcp->shim->toggle_signalling(dig_port, cpu_transcoder, false); |
| if (ret) { |
| drm_err(&i915->drm, "Failed to disable HDCP signalling\n"); |
| return ret; |
| } |
| |
| drm_dbg_kms(&i915->drm, "HDCP is disabled\n"); |
| return 0; |
| } |
| |
| static int intel_hdcp1_enable(struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| int i, ret, tries = 3; |
| |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] HDCP is being enabled...\n", |
| connector->base.base.id, connector->base.name); |
| |
| if (!hdcp_key_loadable(i915)) { |
| drm_err(&i915->drm, "HDCP key Load is not possible\n"); |
| return -ENXIO; |
| } |
| |
| for (i = 0; i < KEY_LOAD_TRIES; i++) { |
| ret = intel_hdcp_load_keys(i915); |
| if (!ret) |
| break; |
| intel_hdcp_clear_keys(i915); |
| } |
| if (ret) { |
| drm_err(&i915->drm, "Could not load HDCP keys, (%d)\n", |
| ret); |
| return ret; |
| } |
| |
| /* Incase of authentication failures, HDCP spec expects reauth. */ |
| for (i = 0; i < tries; i++) { |
| ret = intel_hdcp_auth(connector); |
| if (!ret) { |
| hdcp->hdcp_encrypted = true; |
| return 0; |
| } |
| |
| drm_dbg_kms(&i915->drm, "HDCP Auth failure (%d)\n", ret); |
| |
| /* Ensuring HDCP encryption and signalling are stopped. */ |
| _intel_hdcp_disable(connector); |
| } |
| |
| drm_dbg_kms(&i915->drm, |
| "HDCP authentication failed (%d tries/%d)\n", tries, ret); |
| return ret; |
| } |
| |
| static struct intel_connector *intel_hdcp_to_connector(struct intel_hdcp *hdcp) |
| { |
| return container_of(hdcp, struct intel_connector, hdcp); |
| } |
| |
| static void intel_hdcp_update_value(struct intel_connector *connector, |
| u64 value, bool update_property) |
| { |
| struct drm_device *dev = connector->base.dev; |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| drm_WARN_ON(connector->base.dev, !mutex_is_locked(&hdcp->mutex)); |
| |
| if (hdcp->value == value) |
| return; |
| |
| drm_WARN_ON(dev, !mutex_is_locked(&dig_port->hdcp_mutex)); |
| |
| if (hdcp->value == DRM_MODE_CONTENT_PROTECTION_ENABLED) { |
| if (!drm_WARN_ON(dev, dig_port->num_hdcp_streams == 0)) |
| dig_port->num_hdcp_streams--; |
| } else if (value == DRM_MODE_CONTENT_PROTECTION_ENABLED) { |
| dig_port->num_hdcp_streams++; |
| } |
| |
| hdcp->value = value; |
| if (update_property) { |
| drm_connector_get(&connector->base); |
| queue_work(i915->unordered_wq, &hdcp->prop_work); |
| } |
| } |
| |
| /* Implements Part 3 of the HDCP authorization procedure */ |
| static int intel_hdcp_check_link(struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| enum port port = dig_port->base.port; |
| enum transcoder cpu_transcoder; |
| int ret = 0; |
| |
| mutex_lock(&hdcp->mutex); |
| mutex_lock(&dig_port->hdcp_mutex); |
| |
| cpu_transcoder = hdcp->cpu_transcoder; |
| |
| /* Check_link valid only when HDCP1.4 is enabled */ |
| if (hdcp->value != DRM_MODE_CONTENT_PROTECTION_ENABLED || |
| !hdcp->hdcp_encrypted) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (drm_WARN_ON(&i915->drm, |
| !intel_hdcp_in_use(i915, cpu_transcoder, port))) { |
| drm_err(&i915->drm, |
| "[CONNECTOR:%d:%s] HDCP link stopped encryption,%x\n", |
| connector->base.base.id, connector->base.name, |
| intel_de_read(i915, HDCP_STATUS(i915, cpu_transcoder, port))); |
| ret = -ENXIO; |
| intel_hdcp_update_value(connector, |
| DRM_MODE_CONTENT_PROTECTION_DESIRED, |
| true); |
| goto out; |
| } |
| |
| if (hdcp->shim->check_link(dig_port, connector)) { |
| if (hdcp->value != DRM_MODE_CONTENT_PROTECTION_UNDESIRED) { |
| intel_hdcp_update_value(connector, |
| DRM_MODE_CONTENT_PROTECTION_ENABLED, true); |
| } |
| goto out; |
| } |
| |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] HDCP link failed, retrying authentication\n", |
| connector->base.base.id, connector->base.name); |
| |
| ret = _intel_hdcp_disable(connector); |
| if (ret) { |
| drm_err(&i915->drm, "Failed to disable hdcp (%d)\n", ret); |
| intel_hdcp_update_value(connector, |
| DRM_MODE_CONTENT_PROTECTION_DESIRED, |
| true); |
| goto out; |
| } |
| |
| intel_hdcp_update_value(connector, |
| DRM_MODE_CONTENT_PROTECTION_DESIRED, |
| true); |
| out: |
| mutex_unlock(&dig_port->hdcp_mutex); |
| mutex_unlock(&hdcp->mutex); |
| return ret; |
| } |
| |
| static void intel_hdcp_prop_work(struct work_struct *work) |
| { |
| struct intel_hdcp *hdcp = container_of(work, struct intel_hdcp, |
| prop_work); |
| struct intel_connector *connector = intel_hdcp_to_connector(hdcp); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| drm_modeset_lock(&i915->drm.mode_config.connection_mutex, NULL); |
| mutex_lock(&hdcp->mutex); |
| |
| /* |
| * This worker is only used to flip between ENABLED/DESIRED. Either of |
| * those to UNDESIRED is handled by core. If value == UNDESIRED, |
| * we're running just after hdcp has been disabled, so just exit |
| */ |
| if (hdcp->value != DRM_MODE_CONTENT_PROTECTION_UNDESIRED) |
| drm_hdcp_update_content_protection(&connector->base, |
| hdcp->value); |
| |
| mutex_unlock(&hdcp->mutex); |
| drm_modeset_unlock(&i915->drm.mode_config.connection_mutex); |
| |
| drm_connector_put(&connector->base); |
| } |
| |
| bool is_hdcp_supported(struct drm_i915_private *i915, enum port port) |
| { |
| return DISPLAY_RUNTIME_INFO(i915)->has_hdcp && |
| (DISPLAY_VER(i915) >= 12 || port < PORT_E); |
| } |
| |
| static int |
| hdcp2_prepare_ake_init(struct intel_connector *connector, |
| struct hdcp2_ake_init *ake_data) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct i915_hdcp_arbiter *arbiter; |
| int ret; |
| |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| arbiter = i915->display.hdcp.arbiter; |
| |
| if (!arbiter || !arbiter->ops) { |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| return -EINVAL; |
| } |
| |
| ret = arbiter->ops->initiate_hdcp2_session(arbiter->hdcp_dev, data, ake_data); |
| if (ret) |
| drm_dbg_kms(&i915->drm, "Prepare_ake_init failed. %d\n", |
| ret); |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| |
| return ret; |
| } |
| |
| static int |
| hdcp2_verify_rx_cert_prepare_km(struct intel_connector *connector, |
| struct hdcp2_ake_send_cert *rx_cert, |
| bool *paired, |
| struct hdcp2_ake_no_stored_km *ek_pub_km, |
| size_t *msg_sz) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct i915_hdcp_arbiter *arbiter; |
| int ret; |
| |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| arbiter = i915->display.hdcp.arbiter; |
| |
| if (!arbiter || !arbiter->ops) { |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| return -EINVAL; |
| } |
| |
| ret = arbiter->ops->verify_receiver_cert_prepare_km(arbiter->hdcp_dev, data, |
| rx_cert, paired, |
| ek_pub_km, msg_sz); |
| if (ret < 0) |
| drm_dbg_kms(&i915->drm, "Verify rx_cert failed. %d\n", |
| ret); |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| |
| return ret; |
| } |
| |
| static int hdcp2_verify_hprime(struct intel_connector *connector, |
| struct hdcp2_ake_send_hprime *rx_hprime) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct i915_hdcp_arbiter *arbiter; |
| int ret; |
| |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| arbiter = i915->display.hdcp.arbiter; |
| |
| if (!arbiter || !arbiter->ops) { |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| return -EINVAL; |
| } |
| |
| ret = arbiter->ops->verify_hprime(arbiter->hdcp_dev, data, rx_hprime); |
| if (ret < 0) |
| drm_dbg_kms(&i915->drm, "Verify hprime failed. %d\n", ret); |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| |
| return ret; |
| } |
| |
| static int |
| hdcp2_store_pairing_info(struct intel_connector *connector, |
| struct hdcp2_ake_send_pairing_info *pairing_info) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct i915_hdcp_arbiter *arbiter; |
| int ret; |
| |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| arbiter = i915->display.hdcp.arbiter; |
| |
| if (!arbiter || !arbiter->ops) { |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| return -EINVAL; |
| } |
| |
| ret = arbiter->ops->store_pairing_info(arbiter->hdcp_dev, data, pairing_info); |
| if (ret < 0) |
| drm_dbg_kms(&i915->drm, "Store pairing info failed. %d\n", |
| ret); |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| |
| return ret; |
| } |
| |
| static int |
| hdcp2_prepare_lc_init(struct intel_connector *connector, |
| struct hdcp2_lc_init *lc_init) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct i915_hdcp_arbiter *arbiter; |
| int ret; |
| |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| arbiter = i915->display.hdcp.arbiter; |
| |
| if (!arbiter || !arbiter->ops) { |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| return -EINVAL; |
| } |
| |
| ret = arbiter->ops->initiate_locality_check(arbiter->hdcp_dev, data, lc_init); |
| if (ret < 0) |
| drm_dbg_kms(&i915->drm, "Prepare lc_init failed. %d\n", |
| ret); |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| |
| return ret; |
| } |
| |
| static int |
| hdcp2_verify_lprime(struct intel_connector *connector, |
| struct hdcp2_lc_send_lprime *rx_lprime) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct i915_hdcp_arbiter *arbiter; |
| int ret; |
| |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| arbiter = i915->display.hdcp.arbiter; |
| |
| if (!arbiter || !arbiter->ops) { |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| return -EINVAL; |
| } |
| |
| ret = arbiter->ops->verify_lprime(arbiter->hdcp_dev, data, rx_lprime); |
| if (ret < 0) |
| drm_dbg_kms(&i915->drm, "Verify L_Prime failed. %d\n", |
| ret); |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| |
| return ret; |
| } |
| |
| static int hdcp2_prepare_skey(struct intel_connector *connector, |
| struct hdcp2_ske_send_eks *ske_data) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct i915_hdcp_arbiter *arbiter; |
| int ret; |
| |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| arbiter = i915->display.hdcp.arbiter; |
| |
| if (!arbiter || !arbiter->ops) { |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| return -EINVAL; |
| } |
| |
| ret = arbiter->ops->get_session_key(arbiter->hdcp_dev, data, ske_data); |
| if (ret < 0) |
| drm_dbg_kms(&i915->drm, "Get session key failed. %d\n", |
| ret); |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| |
| return ret; |
| } |
| |
| static int |
| hdcp2_verify_rep_topology_prepare_ack(struct intel_connector *connector, |
| struct hdcp2_rep_send_receiverid_list |
| *rep_topology, |
| struct hdcp2_rep_send_ack *rep_send_ack) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct i915_hdcp_arbiter *arbiter; |
| int ret; |
| |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| arbiter = i915->display.hdcp.arbiter; |
| |
| if (!arbiter || !arbiter->ops) { |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| return -EINVAL; |
| } |
| |
| ret = arbiter->ops->repeater_check_flow_prepare_ack(arbiter->hdcp_dev, |
| data, |
| rep_topology, |
| rep_send_ack); |
| if (ret < 0) |
| drm_dbg_kms(&i915->drm, |
| "Verify rep topology failed. %d\n", ret); |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| |
| return ret; |
| } |
| |
| static int |
| hdcp2_verify_mprime(struct intel_connector *connector, |
| struct hdcp2_rep_stream_ready *stream_ready) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct i915_hdcp_arbiter *arbiter; |
| int ret; |
| |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| arbiter = i915->display.hdcp.arbiter; |
| |
| if (!arbiter || !arbiter->ops) { |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| return -EINVAL; |
| } |
| |
| ret = arbiter->ops->verify_mprime(arbiter->hdcp_dev, data, stream_ready); |
| if (ret < 0) |
| drm_dbg_kms(&i915->drm, "Verify mprime failed. %d\n", ret); |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| |
| return ret; |
| } |
| |
| static int hdcp2_authenticate_port(struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct i915_hdcp_arbiter *arbiter; |
| int ret; |
| |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| arbiter = i915->display.hdcp.arbiter; |
| |
| if (!arbiter || !arbiter->ops) { |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| return -EINVAL; |
| } |
| |
| ret = arbiter->ops->enable_hdcp_authentication(arbiter->hdcp_dev, data); |
| if (ret < 0) |
| drm_dbg_kms(&i915->drm, "Enable hdcp auth failed. %d\n", |
| ret); |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| |
| return ret; |
| } |
| |
| static int hdcp2_close_session(struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct i915_hdcp_arbiter *arbiter; |
| int ret; |
| |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| arbiter = i915->display.hdcp.arbiter; |
| |
| if (!arbiter || !arbiter->ops) { |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| return -EINVAL; |
| } |
| |
| ret = arbiter->ops->close_hdcp_session(arbiter->hdcp_dev, |
| &dig_port->hdcp_port_data); |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| |
| return ret; |
| } |
| |
| static int hdcp2_deauthenticate_port(struct intel_connector *connector) |
| { |
| return hdcp2_close_session(connector); |
| } |
| |
| /* Authentication flow starts from here */ |
| static int hdcp2_authentication_key_exchange(struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| union { |
| struct hdcp2_ake_init ake_init; |
| struct hdcp2_ake_send_cert send_cert; |
| struct hdcp2_ake_no_stored_km no_stored_km; |
| struct hdcp2_ake_send_hprime send_hprime; |
| struct hdcp2_ake_send_pairing_info pairing_info; |
| } msgs; |
| const struct intel_hdcp_shim *shim = hdcp->shim; |
| size_t size; |
| int ret; |
| |
| /* Init for seq_num */ |
| hdcp->seq_num_v = 0; |
| hdcp->seq_num_m = 0; |
| |
| ret = hdcp2_prepare_ake_init(connector, &msgs.ake_init); |
| if (ret < 0) |
| return ret; |
| |
| ret = shim->write_2_2_msg(connector, &msgs.ake_init, |
| sizeof(msgs.ake_init)); |
| if (ret < 0) |
| return ret; |
| |
| ret = shim->read_2_2_msg(connector, HDCP_2_2_AKE_SEND_CERT, |
| &msgs.send_cert, sizeof(msgs.send_cert)); |
| if (ret < 0) |
| return ret; |
| |
| if (msgs.send_cert.rx_caps[0] != HDCP_2_2_RX_CAPS_VERSION_VAL) { |
| drm_dbg_kms(&i915->drm, "cert.rx_caps dont claim HDCP2.2\n"); |
| return -EINVAL; |
| } |
| |
| hdcp->is_repeater = HDCP_2_2_RX_REPEATER(msgs.send_cert.rx_caps[2]); |
| |
| if (drm_hdcp_check_ksvs_revoked(&i915->drm, |
| msgs.send_cert.cert_rx.receiver_id, |
| 1) > 0) { |
| drm_err(&i915->drm, "Receiver ID is revoked\n"); |
| return -EPERM; |
| } |
| |
| /* |
| * Here msgs.no_stored_km will hold msgs corresponding to the km |
| * stored also. |
| */ |
| ret = hdcp2_verify_rx_cert_prepare_km(connector, &msgs.send_cert, |
| &hdcp->is_paired, |
| &msgs.no_stored_km, &size); |
| if (ret < 0) |
| return ret; |
| |
| ret = shim->write_2_2_msg(connector, &msgs.no_stored_km, size); |
| if (ret < 0) |
| return ret; |
| |
| ret = shim->read_2_2_msg(connector, HDCP_2_2_AKE_SEND_HPRIME, |
| &msgs.send_hprime, sizeof(msgs.send_hprime)); |
| if (ret < 0) |
| return ret; |
| |
| ret = hdcp2_verify_hprime(connector, &msgs.send_hprime); |
| if (ret < 0) |
| return ret; |
| |
| if (!hdcp->is_paired) { |
| /* Pairing is required */ |
| ret = shim->read_2_2_msg(connector, |
| HDCP_2_2_AKE_SEND_PAIRING_INFO, |
| &msgs.pairing_info, |
| sizeof(msgs.pairing_info)); |
| if (ret < 0) |
| return ret; |
| |
| ret = hdcp2_store_pairing_info(connector, &msgs.pairing_info); |
| if (ret < 0) |
| return ret; |
| hdcp->is_paired = true; |
| } |
| |
| return 0; |
| } |
| |
| static int hdcp2_locality_check(struct intel_connector *connector) |
| { |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| union { |
| struct hdcp2_lc_init lc_init; |
| struct hdcp2_lc_send_lprime send_lprime; |
| } msgs; |
| const struct intel_hdcp_shim *shim = hdcp->shim; |
| int tries = HDCP2_LC_RETRY_CNT, ret, i; |
| |
| for (i = 0; i < tries; i++) { |
| ret = hdcp2_prepare_lc_init(connector, &msgs.lc_init); |
| if (ret < 0) |
| continue; |
| |
| ret = shim->write_2_2_msg(connector, &msgs.lc_init, |
| sizeof(msgs.lc_init)); |
| if (ret < 0) |
| continue; |
| |
| ret = shim->read_2_2_msg(connector, |
| HDCP_2_2_LC_SEND_LPRIME, |
| &msgs.send_lprime, |
| sizeof(msgs.send_lprime)); |
| if (ret < 0) |
| continue; |
| |
| ret = hdcp2_verify_lprime(connector, &msgs.send_lprime); |
| if (!ret) |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int hdcp2_session_key_exchange(struct intel_connector *connector) |
| { |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| struct hdcp2_ske_send_eks send_eks; |
| int ret; |
| |
| ret = hdcp2_prepare_skey(connector, &send_eks); |
| if (ret < 0) |
| return ret; |
| |
| ret = hdcp->shim->write_2_2_msg(connector, &send_eks, |
| sizeof(send_eks)); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static |
| int _hdcp2_propagate_stream_management_info(struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| union { |
| struct hdcp2_rep_stream_manage stream_manage; |
| struct hdcp2_rep_stream_ready stream_ready; |
| } msgs; |
| const struct intel_hdcp_shim *shim = hdcp->shim; |
| int ret, streams_size_delta, i; |
| |
| if (connector->hdcp.seq_num_m > HDCP_2_2_SEQ_NUM_MAX) |
| return -ERANGE; |
| |
| /* Prepare RepeaterAuth_Stream_Manage msg */ |
| msgs.stream_manage.msg_id = HDCP_2_2_REP_STREAM_MANAGE; |
| drm_hdcp_cpu_to_be24(msgs.stream_manage.seq_num_m, hdcp->seq_num_m); |
| |
| msgs.stream_manage.k = cpu_to_be16(data->k); |
| |
| for (i = 0; i < data->k; i++) { |
| msgs.stream_manage.streams[i].stream_id = data->streams[i].stream_id; |
| msgs.stream_manage.streams[i].stream_type = data->streams[i].stream_type; |
| } |
| |
| streams_size_delta = (HDCP_2_2_MAX_CONTENT_STREAMS_CNT - data->k) * |
| sizeof(struct hdcp2_streamid_type); |
| /* Send it to Repeater */ |
| ret = shim->write_2_2_msg(connector, &msgs.stream_manage, |
| sizeof(msgs.stream_manage) - streams_size_delta); |
| if (ret < 0) |
| goto out; |
| |
| ret = shim->read_2_2_msg(connector, HDCP_2_2_REP_STREAM_READY, |
| &msgs.stream_ready, sizeof(msgs.stream_ready)); |
| if (ret < 0) |
| goto out; |
| |
| data->seq_num_m = hdcp->seq_num_m; |
| |
| ret = hdcp2_verify_mprime(connector, &msgs.stream_ready); |
| |
| out: |
| hdcp->seq_num_m++; |
| |
| return ret; |
| } |
| |
| static |
| int hdcp2_authenticate_repeater_topology(struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| union { |
| struct hdcp2_rep_send_receiverid_list recvid_list; |
| struct hdcp2_rep_send_ack rep_ack; |
| } msgs; |
| const struct intel_hdcp_shim *shim = hdcp->shim; |
| u32 seq_num_v, device_cnt; |
| u8 *rx_info; |
| int ret; |
| |
| ret = shim->read_2_2_msg(connector, HDCP_2_2_REP_SEND_RECVID_LIST, |
| &msgs.recvid_list, sizeof(msgs.recvid_list)); |
| if (ret < 0) |
| return ret; |
| |
| rx_info = msgs.recvid_list.rx_info; |
| |
| if (HDCP_2_2_MAX_CASCADE_EXCEEDED(rx_info[1]) || |
| HDCP_2_2_MAX_DEVS_EXCEEDED(rx_info[1])) { |
| drm_dbg_kms(&i915->drm, "Topology Max Size Exceeded\n"); |
| return -EINVAL; |
| } |
| |
| /* |
| * MST topology is not Type 1 capable if it contains a downstream |
| * device that is only HDCP 1.x or Legacy HDCP 2.0/2.1 compliant. |
| */ |
| dig_port->hdcp_mst_type1_capable = |
| !HDCP_2_2_HDCP1_DEVICE_CONNECTED(rx_info[1]) && |
| !HDCP_2_2_HDCP_2_0_REP_CONNECTED(rx_info[1]); |
| |
| if (!dig_port->hdcp_mst_type1_capable && hdcp->content_type) { |
| drm_dbg_kms(&i915->drm, |
| "HDCP1.x or 2.0 Legacy Device Downstream\n"); |
| return -EINVAL; |
| } |
| |
| /* Converting and Storing the seq_num_v to local variable as DWORD */ |
| seq_num_v = |
| drm_hdcp_be24_to_cpu((const u8 *)msgs.recvid_list.seq_num_v); |
| |
| if (!hdcp->hdcp2_encrypted && seq_num_v) { |
| drm_dbg_kms(&i915->drm, |
| "Non zero Seq_num_v at first RecvId_List msg\n"); |
| return -EINVAL; |
| } |
| |
| if (seq_num_v < hdcp->seq_num_v) { |
| /* Roll over of the seq_num_v from repeater. Reauthenticate. */ |
| drm_dbg_kms(&i915->drm, "Seq_num_v roll over.\n"); |
| return -EINVAL; |
| } |
| |
| device_cnt = (HDCP_2_2_DEV_COUNT_HI(rx_info[0]) << 4 | |
| HDCP_2_2_DEV_COUNT_LO(rx_info[1])); |
| if (drm_hdcp_check_ksvs_revoked(&i915->drm, |
| msgs.recvid_list.receiver_ids, |
| device_cnt) > 0) { |
| drm_err(&i915->drm, "Revoked receiver ID(s) is in list\n"); |
| return -EPERM; |
| } |
| |
| ret = hdcp2_verify_rep_topology_prepare_ack(connector, |
| &msgs.recvid_list, |
| &msgs.rep_ack); |
| if (ret < 0) |
| return ret; |
| |
| hdcp->seq_num_v = seq_num_v; |
| ret = shim->write_2_2_msg(connector, &msgs.rep_ack, |
| sizeof(msgs.rep_ack)); |
| if (ret < 0) |
| return ret; |
| |
| return 0; |
| } |
| |
| static int hdcp2_authenticate_sink(struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| const struct intel_hdcp_shim *shim = hdcp->shim; |
| int ret; |
| |
| ret = hdcp2_authentication_key_exchange(connector); |
| if (ret < 0) { |
| drm_dbg_kms(&i915->drm, "AKE Failed. Err : %d\n", ret); |
| return ret; |
| } |
| |
| ret = hdcp2_locality_check(connector); |
| if (ret < 0) { |
| drm_dbg_kms(&i915->drm, |
| "Locality Check failed. Err : %d\n", ret); |
| return ret; |
| } |
| |
| ret = hdcp2_session_key_exchange(connector); |
| if (ret < 0) { |
| drm_dbg_kms(&i915->drm, "SKE Failed. Err : %d\n", ret); |
| return ret; |
| } |
| |
| if (shim->config_stream_type) { |
| ret = shim->config_stream_type(connector, |
| hdcp->is_repeater, |
| hdcp->content_type); |
| if (ret < 0) |
| return ret; |
| } |
| |
| if (hdcp->is_repeater) { |
| ret = hdcp2_authenticate_repeater_topology(connector); |
| if (ret < 0) { |
| drm_dbg_kms(&i915->drm, |
| "Repeater Auth Failed. Err: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int hdcp2_enable_stream_encryption(struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| enum transcoder cpu_transcoder = hdcp->cpu_transcoder; |
| enum port port = dig_port->base.port; |
| int ret = 0; |
| |
| if (!(intel_de_read(i915, HDCP2_STATUS(i915, cpu_transcoder, port)) & |
| LINK_ENCRYPTION_STATUS)) { |
| drm_err(&i915->drm, "[CONNECTOR:%d:%s] HDCP 2.2 Link is not encrypted\n", |
| connector->base.base.id, connector->base.name); |
| ret = -EPERM; |
| goto link_recover; |
| } |
| |
| if (hdcp->shim->stream_2_2_encryption) { |
| ret = hdcp->shim->stream_2_2_encryption(connector, true); |
| if (ret) { |
| drm_err(&i915->drm, "[CONNECTOR:%d:%s] Failed to enable HDCP 2.2 stream enc\n", |
| connector->base.base.id, connector->base.name); |
| return ret; |
| } |
| drm_dbg_kms(&i915->drm, "HDCP 2.2 transcoder: %s stream encrypted\n", |
| transcoder_name(hdcp->stream_transcoder)); |
| } |
| |
| return 0; |
| |
| link_recover: |
| if (hdcp2_deauthenticate_port(connector) < 0) |
| drm_dbg_kms(&i915->drm, "Port deauth failed.\n"); |
| |
| dig_port->hdcp_auth_status = false; |
| data->k = 0; |
| |
| return ret; |
| } |
| |
| static int hdcp2_enable_encryption(struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| enum port port = dig_port->base.port; |
| enum transcoder cpu_transcoder = hdcp->cpu_transcoder; |
| int ret; |
| |
| drm_WARN_ON(&i915->drm, |
| intel_de_read(i915, HDCP2_STATUS(i915, cpu_transcoder, port)) & |
| LINK_ENCRYPTION_STATUS); |
| if (hdcp->shim->toggle_signalling) { |
| ret = hdcp->shim->toggle_signalling(dig_port, cpu_transcoder, |
| true); |
| if (ret) { |
| drm_err(&i915->drm, |
| "Failed to enable HDCP signalling. %d\n", |
| ret); |
| return ret; |
| } |
| } |
| |
| if (intel_de_read(i915, HDCP2_STATUS(i915, cpu_transcoder, port)) & |
| LINK_AUTH_STATUS) |
| /* Link is Authenticated. Now set for Encryption */ |
| intel_de_rmw(i915, HDCP2_CTL(i915, cpu_transcoder, port), |
| 0, CTL_LINK_ENCRYPTION_REQ); |
| |
| ret = intel_de_wait_for_set(i915, |
| HDCP2_STATUS(i915, cpu_transcoder, |
| port), |
| LINK_ENCRYPTION_STATUS, |
| HDCP_ENCRYPT_STATUS_CHANGE_TIMEOUT_MS); |
| dig_port->hdcp_auth_status = true; |
| |
| return ret; |
| } |
| |
| static int hdcp2_disable_encryption(struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| enum port port = dig_port->base.port; |
| enum transcoder cpu_transcoder = hdcp->cpu_transcoder; |
| int ret; |
| |
| drm_WARN_ON(&i915->drm, !(intel_de_read(i915, HDCP2_STATUS(i915, cpu_transcoder, port)) & |
| LINK_ENCRYPTION_STATUS)); |
| |
| intel_de_rmw(i915, HDCP2_CTL(i915, cpu_transcoder, port), |
| CTL_LINK_ENCRYPTION_REQ, 0); |
| |
| ret = intel_de_wait_for_clear(i915, |
| HDCP2_STATUS(i915, cpu_transcoder, |
| port), |
| LINK_ENCRYPTION_STATUS, |
| HDCP_ENCRYPT_STATUS_CHANGE_TIMEOUT_MS); |
| if (ret == -ETIMEDOUT) |
| drm_dbg_kms(&i915->drm, "Disable Encryption Timedout"); |
| |
| if (hdcp->shim->toggle_signalling) { |
| ret = hdcp->shim->toggle_signalling(dig_port, cpu_transcoder, |
| false); |
| if (ret) { |
| drm_err(&i915->drm, |
| "Failed to disable HDCP signalling. %d\n", |
| ret); |
| return ret; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int |
| hdcp2_propagate_stream_management_info(struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| int i, tries = 3, ret; |
| |
| if (!connector->hdcp.is_repeater) |
| return 0; |
| |
| for (i = 0; i < tries; i++) { |
| ret = _hdcp2_propagate_stream_management_info(connector); |
| if (!ret) |
| break; |
| |
| /* Lets restart the auth incase of seq_num_m roll over */ |
| if (connector->hdcp.seq_num_m > HDCP_2_2_SEQ_NUM_MAX) { |
| drm_dbg_kms(&i915->drm, |
| "seq_num_m roll over.(%d)\n", ret); |
| break; |
| } |
| |
| drm_dbg_kms(&i915->drm, |
| "HDCP2 stream management %d of %d Failed.(%d)\n", |
| i + 1, tries, ret); |
| } |
| |
| return ret; |
| } |
| |
| static int hdcp2_authenticate_and_encrypt(struct intel_atomic_state *state, |
| struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| int ret = 0, i, tries = 3; |
| |
| for (i = 0; i < tries && !dig_port->hdcp_auth_status; i++) { |
| ret = hdcp2_authenticate_sink(connector); |
| if (!ret) { |
| ret = intel_hdcp_prepare_streams(state, connector); |
| if (ret) { |
| drm_dbg_kms(&i915->drm, |
| "Prepare stream failed.(%d)\n", |
| ret); |
| break; |
| } |
| |
| ret = hdcp2_propagate_stream_management_info(connector); |
| if (ret) { |
| drm_dbg_kms(&i915->drm, |
| "Stream management failed.(%d)\n", |
| ret); |
| break; |
| } |
| |
| ret = hdcp2_authenticate_port(connector); |
| if (!ret) |
| break; |
| drm_dbg_kms(&i915->drm, "HDCP2 port auth failed.(%d)\n", |
| ret); |
| } |
| |
| /* Clearing the mei hdcp session */ |
| drm_dbg_kms(&i915->drm, "HDCP2.2 Auth %d of %d Failed.(%d)\n", |
| i + 1, tries, ret); |
| if (hdcp2_deauthenticate_port(connector) < 0) |
| drm_dbg_kms(&i915->drm, "Port deauth failed.\n"); |
| } |
| |
| if (!ret && !dig_port->hdcp_auth_status) { |
| /* |
| * Ensuring the required 200mSec min time interval between |
| * Session Key Exchange and encryption. |
| */ |
| msleep(HDCP_2_2_DELAY_BEFORE_ENCRYPTION_EN); |
| ret = hdcp2_enable_encryption(connector); |
| if (ret < 0) { |
| drm_dbg_kms(&i915->drm, |
| "Encryption Enable Failed.(%d)\n", ret); |
| if (hdcp2_deauthenticate_port(connector) < 0) |
| drm_dbg_kms(&i915->drm, "Port deauth failed.\n"); |
| } |
| } |
| |
| if (!ret) |
| ret = hdcp2_enable_stream_encryption(connector); |
| |
| return ret; |
| } |
| |
| static int _intel_hdcp2_enable(struct intel_atomic_state *state, |
| struct intel_connector *connector) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| int ret; |
| |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] HDCP2.2 is being enabled. Type: %d\n", |
| connector->base.base.id, connector->base.name, |
| hdcp->content_type); |
| |
| intel_hdcp_disable_hdcp_line_rekeying(connector->encoder, hdcp); |
| |
| ret = hdcp2_authenticate_and_encrypt(state, connector); |
| if (ret) { |
| drm_dbg_kms(&i915->drm, "HDCP2 Type%d Enabling Failed. (%d)\n", |
| hdcp->content_type, ret); |
| return ret; |
| } |
| |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] HDCP2.2 is enabled. Type %d\n", |
| connector->base.base.id, connector->base.name, |
| hdcp->content_type); |
| |
| hdcp->hdcp2_encrypted = true; |
| return 0; |
| } |
| |
| static int |
| _intel_hdcp2_disable(struct intel_connector *connector, bool hdcp2_link_recovery) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| int ret; |
| |
| drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s] HDCP2.2 is being Disabled\n", |
| connector->base.base.id, connector->base.name); |
| |
| if (hdcp->shim->stream_2_2_encryption) { |
| ret = hdcp->shim->stream_2_2_encryption(connector, false); |
| if (ret) { |
| drm_err(&i915->drm, "[CONNECTOR:%d:%s] Failed to disable HDCP 2.2 stream enc\n", |
| connector->base.base.id, connector->base.name); |
| return ret; |
| } |
| drm_dbg_kms(&i915->drm, "HDCP 2.2 transcoder: %s stream encryption disabled\n", |
| transcoder_name(hdcp->stream_transcoder)); |
| |
| if (dig_port->num_hdcp_streams > 0 && !hdcp2_link_recovery) |
| return 0; |
| } |
| |
| ret = hdcp2_disable_encryption(connector); |
| |
| if (hdcp2_deauthenticate_port(connector) < 0) |
| drm_dbg_kms(&i915->drm, "Port deauth failed.\n"); |
| |
| connector->hdcp.hdcp2_encrypted = false; |
| dig_port->hdcp_auth_status = false; |
| data->k = 0; |
| |
| return ret; |
| } |
| |
| /* Implements the Link Integrity Check for HDCP2.2 */ |
| static int intel_hdcp2_check_link(struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| enum port port = dig_port->base.port; |
| enum transcoder cpu_transcoder; |
| int ret = 0; |
| |
| mutex_lock(&hdcp->mutex); |
| mutex_lock(&dig_port->hdcp_mutex); |
| cpu_transcoder = hdcp->cpu_transcoder; |
| |
| /* hdcp2_check_link is expected only when HDCP2.2 is Enabled */ |
| if (hdcp->value != DRM_MODE_CONTENT_PROTECTION_ENABLED || |
| !hdcp->hdcp2_encrypted) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| if (drm_WARN_ON(&i915->drm, |
| !intel_hdcp2_in_use(i915, cpu_transcoder, port))) { |
| drm_err(&i915->drm, |
| "HDCP2.2 link stopped the encryption, %x\n", |
| intel_de_read(i915, HDCP2_STATUS(i915, cpu_transcoder, port))); |
| ret = -ENXIO; |
| _intel_hdcp2_disable(connector, true); |
| intel_hdcp_update_value(connector, |
| DRM_MODE_CONTENT_PROTECTION_DESIRED, |
| true); |
| goto out; |
| } |
| |
| ret = hdcp->shim->check_2_2_link(dig_port, connector); |
| if (ret == HDCP_LINK_PROTECTED) { |
| if (hdcp->value != DRM_MODE_CONTENT_PROTECTION_UNDESIRED) { |
| intel_hdcp_update_value(connector, |
| DRM_MODE_CONTENT_PROTECTION_ENABLED, |
| true); |
| } |
| goto out; |
| } |
| |
| if (ret == HDCP_TOPOLOGY_CHANGE) { |
| if (hdcp->value == DRM_MODE_CONTENT_PROTECTION_UNDESIRED) |
| goto out; |
| |
| drm_dbg_kms(&i915->drm, |
| "HDCP2.2 Downstream topology change\n"); |
| } else { |
| drm_dbg_kms(&i915->drm, |
| "[CONNECTOR:%d:%s] HDCP2.2 link failed, retrying auth\n", |
| connector->base.base.id, connector->base.name); |
| } |
| |
| ret = _intel_hdcp2_disable(connector, true); |
| if (ret) { |
| drm_err(&i915->drm, |
| "[CONNECTOR:%d:%s] Failed to disable hdcp2.2 (%d)\n", |
| connector->base.base.id, connector->base.name, ret); |
| intel_hdcp_update_value(connector, |
| DRM_MODE_CONTENT_PROTECTION_DESIRED, true); |
| goto out; |
| } |
| |
| intel_hdcp_update_value(connector, |
| DRM_MODE_CONTENT_PROTECTION_DESIRED, true); |
| out: |
| mutex_unlock(&dig_port->hdcp_mutex); |
| mutex_unlock(&hdcp->mutex); |
| return ret; |
| } |
| |
| static void intel_hdcp_check_work(struct work_struct *work) |
| { |
| struct intel_hdcp *hdcp = container_of(to_delayed_work(work), |
| struct intel_hdcp, |
| check_work); |
| struct intel_connector *connector = intel_hdcp_to_connector(hdcp); |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| if (drm_connector_is_unregistered(&connector->base)) |
| return; |
| |
| if (!intel_hdcp2_check_link(connector)) |
| queue_delayed_work(i915->unordered_wq, &hdcp->check_work, |
| DRM_HDCP2_CHECK_PERIOD_MS); |
| else if (!intel_hdcp_check_link(connector)) |
| queue_delayed_work(i915->unordered_wq, &hdcp->check_work, |
| DRM_HDCP_CHECK_PERIOD_MS); |
| } |
| |
| static int i915_hdcp_component_bind(struct device *drv_kdev, |
| struct device *mei_kdev, void *data) |
| { |
| struct intel_display *display = to_intel_display(drv_kdev); |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| |
| drm_dbg(&i915->drm, "I915 HDCP comp bind\n"); |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| i915->display.hdcp.arbiter = (struct i915_hdcp_arbiter *)data; |
| i915->display.hdcp.arbiter->hdcp_dev = mei_kdev; |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| |
| return 0; |
| } |
| |
| static void i915_hdcp_component_unbind(struct device *drv_kdev, |
| struct device *mei_kdev, void *data) |
| { |
| struct intel_display *display = to_intel_display(drv_kdev); |
| struct drm_i915_private *i915 = to_i915(display->drm); |
| |
| drm_dbg(&i915->drm, "I915 HDCP comp unbind\n"); |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| i915->display.hdcp.arbiter = NULL; |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| } |
| |
| static const struct component_ops i915_hdcp_ops = { |
| .bind = i915_hdcp_component_bind, |
| .unbind = i915_hdcp_component_unbind, |
| }; |
| |
| static enum hdcp_ddi intel_get_hdcp_ddi_index(enum port port) |
| { |
| switch (port) { |
| case PORT_A: |
| return HDCP_DDI_A; |
| case PORT_B ... PORT_F: |
| return (enum hdcp_ddi)port; |
| default: |
| return HDCP_DDI_INVALID_PORT; |
| } |
| } |
| |
| static enum hdcp_transcoder intel_get_hdcp_transcoder(enum transcoder cpu_transcoder) |
| { |
| switch (cpu_transcoder) { |
| case TRANSCODER_A ... TRANSCODER_D: |
| return (enum hdcp_transcoder)(cpu_transcoder | 0x10); |
| default: /* eDP, DSI TRANSCODERS are non HDCP capable */ |
| return HDCP_INVALID_TRANSCODER; |
| } |
| } |
| |
| static int initialize_hdcp_port_data(struct intel_connector *connector, |
| struct intel_digital_port *dig_port, |
| const struct intel_hdcp_shim *shim) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct hdcp_port_data *data = &dig_port->hdcp_port_data; |
| enum port port = dig_port->base.port; |
| |
| if (DISPLAY_VER(i915) < 12) |
| data->hdcp_ddi = intel_get_hdcp_ddi_index(port); |
| else |
| /* |
| * As per ME FW API expectation, for GEN 12+, hdcp_ddi is filled |
| * with zero(INVALID PORT index). |
| */ |
| data->hdcp_ddi = HDCP_DDI_INVALID_PORT; |
| |
| /* |
| * As associated transcoder is set and modified at modeset, here hdcp_transcoder |
| * is initialized to zero (invalid transcoder index). This will be |
| * retained for <Gen12 forever. |
| */ |
| data->hdcp_transcoder = HDCP_INVALID_TRANSCODER; |
| |
| data->port_type = (u8)HDCP_PORT_TYPE_INTEGRATED; |
| data->protocol = (u8)shim->protocol; |
| |
| if (!data->streams) |
| data->streams = kcalloc(INTEL_NUM_PIPES(i915), |
| sizeof(struct hdcp2_streamid_type), |
| GFP_KERNEL); |
| if (!data->streams) { |
| drm_err(&i915->drm, "Out of Memory\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| static bool is_hdcp2_supported(struct drm_i915_private *i915) |
| { |
| if (intel_hdcp_gsc_cs_required(i915)) |
| return true; |
| |
| if (!IS_ENABLED(CONFIG_INTEL_MEI_HDCP)) |
| return false; |
| |
| return (DISPLAY_VER(i915) >= 10 || |
| IS_KABYLAKE(i915) || |
| IS_COFFEELAKE(i915) || |
| IS_COMETLAKE(i915)); |
| } |
| |
| void intel_hdcp_component_init(struct drm_i915_private *i915) |
| { |
| int ret; |
| |
| if (!is_hdcp2_supported(i915)) |
| return; |
| |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| drm_WARN_ON(&i915->drm, i915->display.hdcp.comp_added); |
| |
| i915->display.hdcp.comp_added = true; |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| if (intel_hdcp_gsc_cs_required(i915)) |
| ret = intel_hdcp_gsc_init(i915); |
| else |
| ret = component_add_typed(i915->drm.dev, &i915_hdcp_ops, |
| I915_COMPONENT_HDCP); |
| |
| if (ret < 0) { |
| drm_dbg_kms(&i915->drm, "Failed at fw component add(%d)\n", |
| ret); |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| i915->display.hdcp.comp_added = false; |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| return; |
| } |
| } |
| |
| static void intel_hdcp2_init(struct intel_connector *connector, |
| struct intel_digital_port *dig_port, |
| const struct intel_hdcp_shim *shim) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| int ret; |
| |
| ret = initialize_hdcp_port_data(connector, dig_port, shim); |
| if (ret) { |
| drm_dbg_kms(&i915->drm, "Mei hdcp data init failed\n"); |
| return; |
| } |
| |
| hdcp->hdcp2_supported = true; |
| } |
| |
| int intel_hdcp_init(struct intel_connector *connector, |
| struct intel_digital_port *dig_port, |
| const struct intel_hdcp_shim *shim) |
| { |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| int ret; |
| |
| if (!shim) |
| return -EINVAL; |
| |
| if (is_hdcp2_supported(i915)) |
| intel_hdcp2_init(connector, dig_port, shim); |
| |
| ret = |
| drm_connector_attach_content_protection_property(&connector->base, |
| hdcp->hdcp2_supported); |
| if (ret) { |
| hdcp->hdcp2_supported = false; |
| kfree(dig_port->hdcp_port_data.streams); |
| return ret; |
| } |
| |
| hdcp->shim = shim; |
| mutex_init(&hdcp->mutex); |
| INIT_DELAYED_WORK(&hdcp->check_work, intel_hdcp_check_work); |
| INIT_WORK(&hdcp->prop_work, intel_hdcp_prop_work); |
| init_waitqueue_head(&hdcp->cp_irq_queue); |
| |
| return 0; |
| } |
| |
| static int _intel_hdcp_enable(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *pipe_config, |
| const struct drm_connector_state *conn_state) |
| { |
| struct drm_i915_private *i915 = to_i915(encoder->base.dev); |
| struct intel_connector *connector = |
| to_intel_connector(conn_state->connector); |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| unsigned long check_link_interval = DRM_HDCP_CHECK_PERIOD_MS; |
| int ret = -EINVAL; |
| |
| if (!hdcp->shim) |
| return -ENOENT; |
| |
| if (!connector->encoder) { |
| drm_err(&i915->drm, "[CONNECTOR:%d:%s] encoder is not initialized\n", |
| connector->base.base.id, connector->base.name); |
| return -ENODEV; |
| } |
| |
| mutex_lock(&hdcp->mutex); |
| mutex_lock(&dig_port->hdcp_mutex); |
| drm_WARN_ON(&i915->drm, |
| hdcp->value == DRM_MODE_CONTENT_PROTECTION_ENABLED); |
| hdcp->content_type = (u8)conn_state->hdcp_content_type; |
| |
| if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DP_MST)) { |
| hdcp->cpu_transcoder = pipe_config->mst_master_transcoder; |
| hdcp->stream_transcoder = pipe_config->cpu_transcoder; |
| } else { |
| hdcp->cpu_transcoder = pipe_config->cpu_transcoder; |
| hdcp->stream_transcoder = INVALID_TRANSCODER; |
| } |
| |
| if (DISPLAY_VER(i915) >= 12) |
| dig_port->hdcp_port_data.hdcp_transcoder = |
| intel_get_hdcp_transcoder(hdcp->cpu_transcoder); |
| |
| /* |
| * Considering that HDCP2.2 is more secure than HDCP1.4, If the setup |
| * is capable of HDCP2.2, it is preferred to use HDCP2.2. |
| */ |
| if (intel_hdcp2_get_capability(connector)) { |
| ret = _intel_hdcp2_enable(state, connector); |
| if (!ret) |
| check_link_interval = |
| DRM_HDCP2_CHECK_PERIOD_MS; |
| } |
| |
| /* |
| * When HDCP2.2 fails and Content Type is not Type1, HDCP1.4 will |
| * be attempted. |
| */ |
| if (ret && intel_hdcp_get_capability(connector) && |
| hdcp->content_type != DRM_MODE_HDCP_CONTENT_TYPE1) { |
| ret = intel_hdcp1_enable(connector); |
| } |
| |
| if (!ret) { |
| queue_delayed_work(i915->unordered_wq, &hdcp->check_work, |
| check_link_interval); |
| intel_hdcp_update_value(connector, |
| DRM_MODE_CONTENT_PROTECTION_ENABLED, |
| true); |
| } |
| |
| mutex_unlock(&dig_port->hdcp_mutex); |
| mutex_unlock(&hdcp->mutex); |
| return ret; |
| } |
| |
| void intel_hdcp_enable(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_connector *connector = |
| to_intel_connector(conn_state->connector); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| |
| /* |
| * Enable hdcp if it's desired or if userspace is enabled and |
| * driver set its state to undesired |
| */ |
| if (conn_state->content_protection == |
| DRM_MODE_CONTENT_PROTECTION_DESIRED || |
| (conn_state->content_protection == |
| DRM_MODE_CONTENT_PROTECTION_ENABLED && hdcp->value == |
| DRM_MODE_CONTENT_PROTECTION_UNDESIRED)) |
| _intel_hdcp_enable(state, encoder, crtc_state, conn_state); |
| } |
| |
| int intel_hdcp_disable(struct intel_connector *connector) |
| { |
| struct intel_digital_port *dig_port = intel_attached_dig_port(connector); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| int ret = 0; |
| |
| if (!hdcp->shim) |
| return -ENOENT; |
| |
| mutex_lock(&hdcp->mutex); |
| mutex_lock(&dig_port->hdcp_mutex); |
| |
| if (hdcp->value == DRM_MODE_CONTENT_PROTECTION_UNDESIRED) |
| goto out; |
| |
| intel_hdcp_update_value(connector, |
| DRM_MODE_CONTENT_PROTECTION_UNDESIRED, false); |
| if (hdcp->hdcp2_encrypted) |
| ret = _intel_hdcp2_disable(connector, false); |
| else if (hdcp->hdcp_encrypted) |
| ret = _intel_hdcp_disable(connector); |
| |
| out: |
| mutex_unlock(&dig_port->hdcp_mutex); |
| mutex_unlock(&hdcp->mutex); |
| cancel_delayed_work_sync(&hdcp->check_work); |
| return ret; |
| } |
| |
| void intel_hdcp_update_pipe(struct intel_atomic_state *state, |
| struct intel_encoder *encoder, |
| const struct intel_crtc_state *crtc_state, |
| const struct drm_connector_state *conn_state) |
| { |
| struct intel_connector *connector = |
| to_intel_connector(conn_state->connector); |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| bool content_protection_type_changed, desired_and_not_enabled = false; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| if (!connector->hdcp.shim) |
| return; |
| |
| content_protection_type_changed = |
| (conn_state->hdcp_content_type != hdcp->content_type && |
| conn_state->content_protection != |
| DRM_MODE_CONTENT_PROTECTION_UNDESIRED); |
| |
| /* |
| * During the HDCP encryption session if Type change is requested, |
| * disable the HDCP and reenable it with new TYPE value. |
| */ |
| if (conn_state->content_protection == |
| DRM_MODE_CONTENT_PROTECTION_UNDESIRED || |
| content_protection_type_changed) |
| intel_hdcp_disable(connector); |
| |
| /* |
| * Mark the hdcp state as DESIRED after the hdcp disable of type |
| * change procedure. |
| */ |
| if (content_protection_type_changed) { |
| mutex_lock(&hdcp->mutex); |
| hdcp->value = DRM_MODE_CONTENT_PROTECTION_DESIRED; |
| drm_connector_get(&connector->base); |
| queue_work(i915->unordered_wq, &hdcp->prop_work); |
| mutex_unlock(&hdcp->mutex); |
| } |
| |
| if (conn_state->content_protection == |
| DRM_MODE_CONTENT_PROTECTION_DESIRED) { |
| mutex_lock(&hdcp->mutex); |
| /* Avoid enabling hdcp, if it already ENABLED */ |
| desired_and_not_enabled = |
| hdcp->value != DRM_MODE_CONTENT_PROTECTION_ENABLED; |
| mutex_unlock(&hdcp->mutex); |
| /* |
| * If HDCP already ENABLED and CP property is DESIRED, schedule |
| * prop_work to update correct CP property to user space. |
| */ |
| if (!desired_and_not_enabled && !content_protection_type_changed) { |
| drm_connector_get(&connector->base); |
| queue_work(i915->unordered_wq, &hdcp->prop_work); |
| } |
| } |
| |
| if (desired_and_not_enabled || content_protection_type_changed) |
| _intel_hdcp_enable(state, encoder, crtc_state, conn_state); |
| } |
| |
| void intel_hdcp_component_fini(struct drm_i915_private *i915) |
| { |
| mutex_lock(&i915->display.hdcp.hdcp_mutex); |
| if (!i915->display.hdcp.comp_added) { |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| return; |
| } |
| |
| i915->display.hdcp.comp_added = false; |
| mutex_unlock(&i915->display.hdcp.hdcp_mutex); |
| |
| if (intel_hdcp_gsc_cs_required(i915)) |
| intel_hdcp_gsc_fini(i915); |
| else |
| component_del(i915->drm.dev, &i915_hdcp_ops); |
| } |
| |
| void intel_hdcp_cleanup(struct intel_connector *connector) |
| { |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| |
| if (!hdcp->shim) |
| return; |
| |
| /* |
| * If the connector is registered, it's possible userspace could kick |
| * off another HDCP enable, which would re-spawn the workers. |
| */ |
| drm_WARN_ON(connector->base.dev, |
| connector->base.registration_state == DRM_CONNECTOR_REGISTERED); |
| |
| /* |
| * Now that the connector is not registered, check_work won't be run, |
| * but cancel any outstanding instances of it |
| */ |
| cancel_delayed_work_sync(&hdcp->check_work); |
| |
| /* |
| * We don't cancel prop_work in the same way as check_work since it |
| * requires connection_mutex which could be held while calling this |
| * function. Instead, we rely on the connector references grabbed before |
| * scheduling prop_work to ensure the connector is alive when prop_work |
| * is run. So if we're in the destroy path (which is where this |
| * function should be called), we're "guaranteed" that prop_work is not |
| * active (tl;dr This Should Never Happen). |
| */ |
| drm_WARN_ON(connector->base.dev, work_pending(&hdcp->prop_work)); |
| |
| mutex_lock(&hdcp->mutex); |
| hdcp->shim = NULL; |
| mutex_unlock(&hdcp->mutex); |
| } |
| |
| void intel_hdcp_atomic_check(struct drm_connector *connector, |
| struct drm_connector_state *old_state, |
| struct drm_connector_state *new_state) |
| { |
| u64 old_cp = old_state->content_protection; |
| u64 new_cp = new_state->content_protection; |
| struct drm_crtc_state *crtc_state; |
| |
| if (!new_state->crtc) { |
| /* |
| * If the connector is being disabled with CP enabled, mark it |
| * desired so it's re-enabled when the connector is brought back |
| */ |
| if (old_cp == DRM_MODE_CONTENT_PROTECTION_ENABLED) |
| new_state->content_protection = |
| DRM_MODE_CONTENT_PROTECTION_DESIRED; |
| return; |
| } |
| |
| crtc_state = drm_atomic_get_new_crtc_state(new_state->state, |
| new_state->crtc); |
| /* |
| * Fix the HDCP uapi content protection state in case of modeset. |
| * FIXME: As per HDCP content protection property uapi doc, an uevent() |
| * need to be sent if there is transition from ENABLED->DESIRED. |
| */ |
| if (drm_atomic_crtc_needs_modeset(crtc_state) && |
| (old_cp == DRM_MODE_CONTENT_PROTECTION_ENABLED && |
| new_cp != DRM_MODE_CONTENT_PROTECTION_UNDESIRED)) |
| new_state->content_protection = |
| DRM_MODE_CONTENT_PROTECTION_DESIRED; |
| |
| /* |
| * Nothing to do if the state didn't change, or HDCP was activated since |
| * the last commit. And also no change in hdcp content type. |
| */ |
| if (old_cp == new_cp || |
| (old_cp == DRM_MODE_CONTENT_PROTECTION_DESIRED && |
| new_cp == DRM_MODE_CONTENT_PROTECTION_ENABLED)) { |
| if (old_state->hdcp_content_type == |
| new_state->hdcp_content_type) |
| return; |
| } |
| |
| crtc_state->mode_changed = true; |
| } |
| |
| /* Handles the CP_IRQ raised from the DP HDCP sink */ |
| void intel_hdcp_handle_cp_irq(struct intel_connector *connector) |
| { |
| struct intel_hdcp *hdcp = &connector->hdcp; |
| struct drm_i915_private *i915 = to_i915(connector->base.dev); |
| |
| if (!hdcp->shim) |
| return; |
| |
| atomic_inc(&connector->hdcp.cp_irq_count); |
| wake_up_all(&connector->hdcp.cp_irq_queue); |
| |
| queue_delayed_work(i915->unordered_wq, &hdcp->check_work, 0); |
| } |